bcm63xx: add support for linux 3.8
[openwrt.git] / target / linux / brcm63xx / patches-3.8 / 532-board_96328a-1241N.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -145,6 +145,72 @@ static struct board_info __initdata boar
4         },
5  };
6  
7 +static struct board_info __initdata board_96328A_1241N = {
8 +       .name                                   = "96328A-1241N",
9 +       .expected_cpu_id                        = 0x6328,
10 +
11 +       .has_uart0                              = 1,
12 +       .has_pci                                = 1,
13 +       .has_ohci0                              = 1,
14 +       .has_ehci0                              = 1,
15 +       .has_enetsw                             = 1,
16 +
17 +       .enetsw = {
18 +               .used_ports = {
19 +                       [0] = {
20 +                               .used           = 1,
21 +                               .phy_id         = 1,
22 +                               .name           = "Port 1",
23 +                       },
24 +                       [1] = {
25 +                               .used           = 1,
26 +                               .phy_id         = 2,
27 +                               .name           = "Port 2",
28 +                       },
29 +                       [2] = {
30 +                               .used           = 1,
31 +                               .phy_id         = 3,
32 +                               .name           = "Port 3",
33 +                       },
34 +                       [3] = {
35 +                               .used           = 1,
36 +                               .phy_id         = 4,
37 +                               .name           = "Port 4",
38 +                       },
39 +               },
40 +       },
41 +
42 +       .leds = {
43 +               {
44 +                       .name                   = "96328A-1241N:green:power",
45 +                       .gpio                   = 4,
46 +                       .active_low             = 1,
47 +                       .default_trigger        = "default-on",
48 +               },
49 +               {
50 +                       .name                   = "96328A-1241N:red:alarm",
51 +                       .gpio                   = 2,
52 +                       .active_low             = 1,
53 +               },
54 +               {
55 +                       .name                   = "96328A-1241N:green:inet",
56 +                       .gpio                   = 3,
57 +                       .active_low             = 1,
58 +               },
59 +       },
60 +
61 +       .buttons = {
62 +               {
63 +                       .desc                   = "reset",
64 +                       .gpio                   = 23,
65 +                       .active_low             = 1,
66 +                       .type                   = EV_KEY,
67 +                       .code                   = KEY_RESTART,
68 +                       .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
69 +               },
70 +       },
71 +};
72 +
73  static struct board_info __initdata board_96328A_1441N1 = {
74         .name                                   = "96328A-1441N1",
75         .expected_cpu_id                        = 0x6328,
76 @@ -3116,6 +3182,7 @@ static struct board_info __initdata boar
77  static const struct board_info __initconst *bcm963xx_boards[] = {
78  #ifdef CONFIG_BCM63XX_CPU_6328
79         &board_96328avng,
80 +       &board_96328A_1241N,
81         &board_96328A_1441N1,
82         &board_963281TAN,
83         &board_963281T_TEF,