bcm63xx: add support for linux 3.8
[openwrt.git] / target / linux / brcm63xx / patches-3.8 / 519_board_CPVA502plus.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -1116,6 +1116,46 @@ static struct board_info __initdata boar
4                 },
5         },
6  };
7 +
8 +static struct board_info __initdata board_CPVA502plus = {
9 +       .name                           = "CPVA502+",
10 +       .expected_cpu_id                = 0x6348,
11 +
12 +       .has_uart0                      = 1,
13 +       .has_enet0                      = 1,
14 +       .has_enet1                      = 1,
15 +       .has_pci                        = 1,
16 +
17 +       .enet0 = {
18 +               .has_phy                = 1,
19 +               .use_internal_phy       = 1,
20 +       },
21 +       .enet1 = {
22 +               .has_phy                = 1,
23 +               .phy_id                 = 0,
24 +               .force_speed_100        = 1,
25 +               .force_duplex_full      = 1,
26 +       },
27 +
28 +       .leds = {
29 +               {
30 +                       .name           = "CPVA502+:green:phone",
31 +                       .gpio           = 0,
32 +                       .active_low     = 1,
33 +               },
34 +               {
35 +                       .name           = "CPVA502+:green:link",
36 +                       .gpio           = 5,
37 +                       .active_low     = 1,
38 +               },
39 +               {
40 +                       .name           = "CPVA502+:green:feth1", /* FIXME:does gpio4 enable eth1 phy? */
41 +                       .gpio           = 4,
42 +                       .active_low     = 1,
43 +               },
44 +       },
45 +};
46 +
47  #endif
48  
49  /*
50 @@ -2183,6 +2223,7 @@ static const struct board_info __initcon
51         &board_V2110,
52         &board_ct536_ct5621,
53         &board_96348A_122,
54 +       &board_CPVA502plus,
55  #endif
56  
57  #ifdef CONFIG_BCM63XX_CPU_6358