target/linux/brcm63xx/patches-3.8/410-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch

   1 From b11218c750ab92cfab4408a0328f1b36ceec3f33 Mon Sep 17 00:00:00 2001
   2 From: Jonas Gorski <jonas.gorski@gmail.com>
   3 Date: Fri, 6 Jan 2012 12:24:18 +0100
   4 Subject: [PATCH 19/63] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
   5
   6 Only connect/disconnect the phy during probe and remove, not during any
   7 open/close. The phy seldom changes during the runtime, and disconnecting
   8 the phy during close will prevent it from keeping any configuration over
   9 a down/up cycle.
  10
  11 Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
  12 ---
  13  drivers/net/ethernet/broadcom/bcm63xx_enet.c |   84 +++++++++++++-------------
  14  1 files changed, 41 insertions(+), 43 deletions(-)
  15
  16 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
  17 +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
  18 @@ -784,10 +784,8 @@ static int bcm_enet_open(struct net_devi
  19         struct bcm_enet_priv *priv;
  20         struct sockaddr addr;
  21         struct device *kdev;
  22 -       struct phy_device *phydev;
  23         int i, ret;
  24         unsigned int size;
  25 -       char phy_id[MII_BUS_ID_SIZE + 3];
  26         void *p;
  27         u32 val;
  28
  29 @@ -795,40 +793,10 @@ static int bcm_enet_open(struct net_devi
  30         kdev = &priv->pdev->dev;
  31
  32         if (priv->has_phy) {
  33 -               /* connect to PHY */
  34 -               snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
  35 -                        priv->mii_bus->id, priv->phy_id);
  36 -
  37 -               phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, 0,
  38 -                                    PHY_INTERFACE_MODE_MII);
  39 -
  40 -               if (IS_ERR(phydev)) {
  41 -                       dev_err(kdev, "could not attach to PHY\n");
  42 -                       return PTR_ERR(phydev);
  43 -               }
  44 -
  45 -               /* mask with MAC supported features */
  46 -               phydev->supported &= (SUPPORTED_10baseT_Half |
  47 -                                     SUPPORTED_10baseT_Full |
  48 -                                     SUPPORTED_100baseT_Half |
  49 -                                     SUPPORTED_100baseT_Full |
  50 -                                     SUPPORTED_Autoneg |
  51 -                                     SUPPORTED_Pause |
  52 -                                     SUPPORTED_MII);
  53 -               phydev->advertising = phydev->supported;
  54 -
  55 -               if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
  56 -                       phydev->advertising |= SUPPORTED_Pause;
  57 -               else
  58 -                       phydev->advertising &= ~SUPPORTED_Pause;
  59 -
  60 -               dev_info(kdev, "attached PHY at address %d [%s]\n",
  61 -                        phydev->addr, phydev->drv->name);
  62 -
  63 +               /* Reset state */
  64                 priv->old_link = 0;
  65                 priv->old_duplex = -1;
  66                 priv->old_pause = -1;
  67 -               priv->phydev = phydev;
  68         }
  69
  70         /* mask all interrupts and request them */
  71 @@ -838,7 +806,7 @@ static int bcm_enet_open(struct net_devi
  72
  73         ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
  74         if (ret)
  75 -               goto out_phy_disconnect;
  76 +               return ret;
  77
  78         ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, IRQF_DISABLED,
  79                           dev->name, dev);
  80 @@ -1025,9 +993,6 @@ out_freeirq_rx:
  81  out_freeirq:
  82         free_irq(dev->irq, dev);
  83
  84 -out_phy_disconnect:
  85 -       phy_disconnect(priv->phydev);
  86 -
  87         return ret;
  88  }
  89
  90 @@ -1132,12 +1097,6 @@ static int bcm_enet_stop(struct net_devi
  91         free_irq(priv->irq_rx, dev);
  92         free_irq(dev->irq, dev);
  93
  94 -       /* release phy */
  95 -       if (priv->has_phy) {
  96 -               phy_disconnect(priv->phydev);
  97 -               priv->phydev = NULL;
  98 -       }
  99 -
 100         return 0;
 101  }
 102
 103 @@ -1714,6 +1673,8 @@ static int bcm_enet_probe(struct platfor
 104
 105         /* MII bus registration */
 106         if (priv->has_phy) {
 107 +               struct phy_device *phydev;
 108 +               char phy_id[MII_BUS_ID_SIZE + 3];
 109
 110                 priv->mii_bus = mdiobus_alloc();
 111                 if (!priv->mii_bus) {
 112 @@ -1750,6 +1711,38 @@ static int bcm_enet_probe(struct platfor
 113                         dev_err(&pdev->dev, "unable to register mdio bus\n");
 114                         goto out_free_mdio;
 115                 }
 116 +
 117 +               /* connect to PHY */
 118 +               snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
 119 +                        priv->mii_bus->id, priv->phy_id);
 120 +
 121 +               phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, 0,
 122 +                                    PHY_INTERFACE_MODE_MII);
 123 +
 124 +               if (IS_ERR(phydev)) {
 125 +                       dev_err(&pdev->dev, "could not attach to PHY\n");
 126 +                       goto out_unregister_mdio;
 127 +               }
 128 +
 129 +               /* mask with MAC supported features */
 130 +               phydev->supported &= (SUPPORTED_10baseT_Half |
 131 +                                     SUPPORTED_10baseT_Full |
 132 +                                     SUPPORTED_100baseT_Half |
 133 +                                     SUPPORTED_100baseT_Full |
 134 +                                     SUPPORTED_Autoneg |
 135 +                                     SUPPORTED_Pause |
 136 +                                     SUPPORTED_MII);
 137 +               phydev->advertising = phydev->supported;
 138 +
 139 +               if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
 140 +                       phydev->advertising |= SUPPORTED_Pause;
 141 +               else
 142 +                       phydev->advertising &= ~SUPPORTED_Pause;
 143 +
 144 +               dev_info(&pdev->dev, "attached PHY at address %d [%s]\n",
 145 +                        phydev->addr, phydev->drv->name);
 146 +
 147 +               priv->phydev = phydev;
 148         } else {
 149
 150                 /* run platform code to initialize PHY device */
 151 @@ -1795,6 +1788,9 @@ static int bcm_enet_probe(struct platfor
 152         return 0;
 153
 154  out_unregister_mdio:
 155 +       if (priv->phydev)
 156 +               phy_disconnect(priv->phydev);
 157 +
 158         if (priv->mii_bus) {
 159                 mdiobus_unregister(priv->mii_bus);
 160                 kfree(priv->mii_bus->irq);
 161 @@ -1845,6 +1841,8 @@ static int bcm_enet_remove(struct platfo
 162         enet_writel(priv, 0, ENET_MIISC_REG);
 163
 164         if (priv->has_phy) {
 165 +               phy_disconnect(priv->phydev);
 166 +               priv->phydev = NULL;
 167                 mdiobus_unregister(priv->mii_bus);
 168                 kfree(priv->mii_bus->irq);
 169                 mdiobus_free(priv->mii_bus);