target/linux/brcm63xx/patches-3.18/528-board_nb6.patch

   1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
   2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
   3 @@ -18,6 +18,7 @@
   4  #if 0 /* FIXME: 3.14 removed non-DT support */
   5  #include <linux/spi/74x164.h>
   6  #endif
   7 +#include <linux/rtl8367.h>
   8  #include <asm/addrspace.h>
   9  #include <bcm63xx_board.h>
  10  #include <bcm63xx_cpu.h>
  11 @@ -42,6 +43,8 @@
  12  #define NB4_SPI_GPIO_MOSI      7
  13  #define NB4_SPI_GPIO_CLK       6
  14  #define NB4_74HC64_GPIO(X)     (NB4_74X164_GPIO_BASE + (X))
  15 +#define NB6_GPIO_RTL8367_SDA   18
  16 +#define NB6_GPIO_RTL8367_SCK   20
  17
  18  #define CT6373_PID_OFFSET              0xff80
  19  #define CT6373_74X164_GPIO_BASE        64
  20 @@ -2370,6 +2373,104 @@ static struct board_info __initdata boar
  21  };
  22  #endif /* CONFIG_BCM63XX_CPU_6358 */
  23
  24 +#ifdef CONFIG_BCM63XX_CPU_6362
  25 +static struct rtl8367_extif_config nb6_rtl8367_extif0_cfg = {
  26 +       .mode = RTL8367_EXTIF_MODE_RGMII,
  27 +       .txdelay = 1,
  28 +       .rxdelay = 5,
  29 +       .ability = {
  30 +               .force_mode = 1,
  31 +               .txpause = 1,
  32 +               .rxpause = 1,
  33 +               .link = 1,
  34 +               .duplex = 1,
  35 +               .speed = RTL8367_PORT_SPEED_1000,
  36 +       },
  37 +};
  38 +
  39 +static struct rtl8367_platform_data nb6_rtl8367_data = {
  40 +       .gpio_sda       = NB6_GPIO_RTL8367_SDA,
  41 +       .gpio_sck       = NB6_GPIO_RTL8367_SCK,
  42 +       .extif0_cfg     = &nb6_rtl8367_extif0_cfg,
  43 +};
  44 +
  45 +static struct platform_device nb6_rtl8367_device = {
  46 +       .name           = RTL8367_DRIVER_NAME,
  47 +       .id             = -1,
  48 +       .dev = {
  49 +               .platform_data  = &nb6_rtl8367_data,
  50 +       }
  51 +};
  52 +
  53 +static struct platform_device * __initdata nb6_devices[] = {
  54 +       &nb6_rtl8367_device,
  55 +};
  56 +
  57 +static struct board_info __initdata board_nb6 = {
  58 +       .name                           = "NB6",
  59 +       .expected_cpu_id                = 0x6362,
  60 +
  61 +       .has_uart0                      = 1,
  62 +
  63 +       .has_ohci0                      = 1,
  64 +       .has_ehci0                      = 1,
  65 +       .num_usbh_ports                 = 2,
  66 +
  67 +       .has_enetsw                     = 1,
  68 +
  69 +       .enetsw = {
  70 +               .used_ports = {
  71 +                       [4] = {
  72 +                               .used   = 1,
  73 +                               .phy_id = 0xff,
  74 +                               .bypass_link = 1,
  75 +                               .force_speed = 1000,
  76 +                               .force_duplex_full = 1,
  77 +                               .name   = "RGMII",
  78 +                       },
  79 +               },
  80 +       },
  81 +
  82 +       .buttons = {
  83 +               {
  84 +                       .desc           = "reset",
  85 +                       .gpio           = 24,
  86 +                       .type           = EV_KEY,
  87 +                       .code           = KEY_RESTART,
  88 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
  89 +                       .active_low     = 1,
  90 +               },
  91 +               {
  92 +                       .desc           = "wps",
  93 +                       .gpio           = 25,
  94 +                       .type           = EV_KEY,
  95 +                       .code           = KEY_WPS_BUTTON,
  96 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
  97 +                       .active_low     = 1,
  98 +               },
  99 +               {
 100 +                       .desc           = "wlan",
 101 +                       .gpio           = 12,
 102 +                       .type           = EV_KEY,
 103 +                       .code           = KEY_WLAN,
 104 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 105 +                       .active_low     = 1,
 106 +               },
 107 +               {
 108 +                       .desc           = "service",
 109 +                       .gpio           = 10,
 110 +                       .type           = EV_KEY,
 111 +                       .code           = BTN_0,
 112 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 113 +                       .active_low     = 1,
 114 +               },
 115 +       },
 116 +
 117 +       .devs = nb6_devices,
 118 +       .num_devs = ARRAY_SIZE(nb6_devices),
 119 +};
 120 +#endif /* CONFIG_BCM63XX_CPU_6362 */
 121 +
 122  /*
 123   * known 6368 boards
 124   */
 125 @@ -2573,6 +2674,10 @@ static const struct board_info __initcon
 126         &board_DVAG3810BN,
 127  #endif
 128
 129 +#ifdef CONFIG_BCM63XX_CPU_6362
 130 +       &board_nb6,
 131 +#endif
 132 +
 133  #ifdef CONFIG_BCM63XX_CPU_6368
 134         &board_96368mvwg,
 135         &board_96368mvngr,
 136 @@ -2634,6 +2739,9 @@ static struct of_device_id const bcm963x
 137         { .compatible = "t-com,spw303v", .data = &board_spw303v, },
 138         { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
 139  #endif
 140 +#ifdef CONFIG_BCM63XX_CPU_6362
 141 +       { .compatible = "sfr,nb6-ser-r0", .data = &board_nb6, },
 142 +#endif
 143  #ifdef CONFIG_BCM63XX_CPU_6368
 144         { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
 145         { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },