target/linux/brcm63xx/patches-3.14/561-board_WAP-5813n.patch

   1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
   2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
   3 @@ -13,6 +13,7 @@
   4  #include <linux/gpio_keys.h>
   5  #include <linux/input.h>
   6  #include <linux/pci_ids.h>
   7 +#include <linux/platform_data/b53.h>
   8  #include <linux/platform_device.h>
   9  #include <linux/spi/spi.h>
  10  #include <linux/spi/spi_gpio.h>
  11 @@ -4143,6 +4144,117 @@ static struct board_info __initdata boar
  12         .has_ohci0 = 1,
  13         .has_ehci0 = 1,
  14  };
  15 +
  16 +static struct b53_platform_data WAP5813n_b53_pdata = {
  17 +       .alias = "eth0",
  18 +};
  19 +
  20 +static struct spi_board_info WAP5813n_spi_devices[] = {
  21 +       {
  22 +               .modalias = "b53-switch",
  23 +               .max_speed_hz = 781000,
  24 +               .bus_num = 0,
  25 +               .chip_select = 0,
  26 +               .platform_data = &WAP5813n_b53_pdata,
  27 +       }
  28 +};
  29 +
  30 +static struct sprom_fixup __initdata wap5813n_fixups[] = {
  31 +       { .offset = 97, .value = 0xfeed },
  32 +       { .offset = 98, .value = 0x15d1 },
  33 +       { .offset = 99, .value = 0xfb0d },
  34 +       { .offset = 113, .value = 0xfef7 },
  35 +       { .offset = 114, .value = 0x15f7 },
  36 +       { .offset = 115, .value = 0xfb1a },
  37 +};
  38 +
  39 +static struct board_info __initdata board_WAP5813n = {
  40 +       .name                           = "96369R-1231N",
  41 +       .expected_cpu_id                = 0x6368,
  42 +
  43 +       .has_uart0                      = 1,
  44 +       .has_pci                        = 1,
  45 +       .use_fallback_sprom             = 1,
  46 +       .has_ohci0                      = 1,
  47 +       .has_ehci0                      = 1,
  48 +
  49 +       .has_enetsw                     = 1,
  50 +       .enetsw = {
  51 +               .used_ports = {
  52 +                       [4] = {
  53 +                               .used = 1,
  54 +                               .phy_id = 0xff,
  55 +                               .bypass_link = 1,
  56 +                               .force_speed = 1000,
  57 +                               .force_duplex_full = 1,
  58 +                               .name = "RGMII",
  59 +                       },
  60 +               },
  61 +       },
  62 +
  63 +       .leds = {
  64 +               {
  65 +                       .name           = "WAP-5813n:green:power",
  66 +                       .gpio           = 22,
  67 +                       .default_trigger = "default-on",
  68 +               },
  69 +               {
  70 +                       .name           = "WAP-5813n:red:power",
  71 +                       .gpio           = 24,
  72 +               },
  73 +               {
  74 +                       .name           = "WAP-5813n:green:inet",
  75 +                       .gpio           = 5,
  76 +               },
  77 +               {
  78 +                       .name           = "WAP-5813n:red:inet",
  79 +                       .gpio           = 31,
  80 +               },
  81 +               {
  82 +                       .name           = "WAP-5813n:green:wps",
  83 +                       .gpio           = 23,
  84 +                       .active_low     = 1,
  85 +               },
  86 +       },
  87 +
  88 +       .buttons = {
  89 +               {
  90 +                       .desc           = "wlan",
  91 +                       .gpio           = 32,
  92 +                       .active_low     = 1,
  93 +                       .type           = EV_KEY,
  94 +                       .code           = KEY_WLAN,
  95 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
  96 +               },
  97 +               {
  98 +                       .desc           = "reset",
  99 +                       .gpio           = 34,
 100 +                       .active_low     = 1,
 101 +                       .type           = EV_KEY,
 102 +                       .code           = KEY_RESTART,
 103 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 104 +               },
 105 +               {
 106 +                       .desc           = "wps",
 107 +                       .gpio           = 35,
 108 +                       .active_low     = 1,
 109 +                       .type           = EV_KEY,
 110 +                       .code           = KEY_WPS_BUTTON,
 111 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 112 +               },
 113 +       },
 114 +
 115 +       .fallback_sprom = {
 116 +               .type                           = SPROM_BCM43222,
 117 +               .pci_bus                        = 0,
 118 +               .pci_dev                        = 1,
 119 +               .board_fixups                   = wap5813n_fixups,
 120 +               .num_board_fixups               = ARRAY_SIZE(wap5813n_fixups),
 121 +       },
 122 +
 123 +       .spis = WAP5813n_spi_devices,
 124 +       .num_spis = ARRAY_SIZE(WAP5813n_spi_devices),
 125 +};
 126  #endif /* CONFIG_BCM63XX_CPU_6368 */
 127
 128  /*
 129 @@ -4522,6 +4634,7 @@ static const struct board_info __initcon
 130  #ifdef CONFIG_BCM63XX_CPU_6368
 131         &board_96368mvwg,
 132         &board_96368mvngr,
 133 +       &board_WAP5813n,
 134  #endif
 135  #ifdef CONFIG_BCM63XX_CPU_63268
 136         &board_963268bu_p300,
 137 @@ -4601,6 +4714,7 @@ static struct of_device_id const bcm963x
 138  #ifdef CONFIG_BCM63XX_CPU_6368
 139         { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
 140         { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
 141 +       { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
 142  #endif
 143  #ifdef CONFIG_BCM63XX_CPU_63268
 144         { .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, },