ipv6-support: Update iteration
[openwrt.git] / target / linux / brcm47xx / patches-3.3 / 812-disable_wgt634u_crap.patch
1 --- a/arch/mips/bcm47xx/Makefile
2 +++ b/arch/mips/bcm47xx/Makefile
3 @@ -4,4 +4,3 @@
4  #
5  
6  obj-y                          += gpio.o irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
7 -obj-$(CONFIG_BCM47XX_SSB)      += wgt634u.o
8 --- a/arch/mips/bcm47xx/wgt634u.c
9 +++ /dev/null
10 @@ -1,177 +0,0 @@
11 -/*
12 - * This file is subject to the terms and conditions of the GNU General Public
13 - * License.  See the file "COPYING" in the main directory of this archive
14 - * for more details.
15 - *
16 - * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
17 - */
18 -
19 -#include <linux/platform_device.h>
20 -#include <linux/module.h>
21 -#include <linux/leds.h>
22 -#include <linux/mtd/physmap.h>
23 -#include <linux/ssb/ssb.h>
24 -#include <linux/interrupt.h>
25 -#include <linux/reboot.h>
26 -#include <linux/gpio.h>
27 -#include <asm/mach-bcm47xx/bcm47xx.h>
28 -
29 -/* GPIO definitions for the WGT634U */
30 -#define WGT634U_GPIO_LED       3
31 -#define WGT634U_GPIO_RESET     2
32 -#define WGT634U_GPIO_TP1       7
33 -#define WGT634U_GPIO_TP2       6
34 -#define WGT634U_GPIO_TP3       5
35 -#define WGT634U_GPIO_TP4       4
36 -#define WGT634U_GPIO_TP5       1
37 -
38 -static struct gpio_led wgt634u_leds[] = {
39 -       {
40 -               .name = "power",
41 -               .gpio = WGT634U_GPIO_LED,
42 -               .active_low = 1,
43 -               .default_trigger = "heartbeat",
44 -       },
45 -};
46 -
47 -static struct gpio_led_platform_data wgt634u_led_data = {
48 -       .num_leds =     ARRAY_SIZE(wgt634u_leds),
49 -       .leds =         wgt634u_leds,
50 -};
51 -
52 -static struct platform_device wgt634u_gpio_leds = {
53 -       .name =         "leds-gpio",
54 -       .id =           -1,
55 -       .dev = {
56 -               .platform_data = &wgt634u_led_data,
57 -       }
58 -};
59 -
60 -
61 -/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
62 -   firmware. */
63 -static struct mtd_partition wgt634u_partitions[] = {
64 -       {
65 -               .name       = "cfe",
66 -               .offset     = 0,
67 -               .size       = 0x60000,          /* 384k */
68 -               .mask_flags = MTD_WRITEABLE     /* force read-only */
69 -       },
70 -       {
71 -               .name   = "config",
72 -               .offset = 0x60000,
73 -               .size   = 0x20000               /* 128k */
74 -       },
75 -       {
76 -               .name   = "linux",
77 -               .offset = 0x80000,
78 -               .size   = 0x140000              /* 1280k */
79 -       },
80 -       {
81 -               .name   = "jffs",
82 -               .offset = 0x1c0000,
83 -               .size   = 0x620000              /* 6272k */
84 -       },
85 -       {
86 -               .name   = "nvram",
87 -               .offset = 0x7e0000,
88 -               .size   = 0x20000               /* 128k */
89 -       },
90 -};
91 -
92 -static struct physmap_flash_data wgt634u_flash_data = {
93 -       .parts    = wgt634u_partitions,
94 -       .nr_parts = ARRAY_SIZE(wgt634u_partitions)
95 -};
96 -
97 -static struct resource wgt634u_flash_resource = {
98 -       .flags = IORESOURCE_MEM,
99 -};
100 -
101 -static struct platform_device wgt634u_flash = {
102 -       .name          = "physmap-flash",
103 -       .id            = 0,
104 -       .dev           = { .platform_data = &wgt634u_flash_data, },
105 -       .resource      = &wgt634u_flash_resource,
106 -       .num_resources = 1,
107 -};
108 -
109 -/* Platform devices */
110 -static struct platform_device *wgt634u_devices[] __initdata = {
111 -       &wgt634u_flash,
112 -       &wgt634u_gpio_leds,
113 -};
114 -
115 -static irqreturn_t gpio_interrupt(int irq, void *ignored)
116 -{
117 -       int state;
118 -
119 -       /* Interrupts are shared, check if the current one is
120 -          a GPIO interrupt. */
121 -       if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
122 -                                  SSB_CHIPCO_IRQ_GPIO))
123 -               return IRQ_NONE;
124 -
125 -       state = gpio_get_value(WGT634U_GPIO_RESET);
126 -
127 -       /* Interrupt are level triggered, revert the interrupt polarity
128 -          to clear the interrupt. */
129 -       gpio_polarity(WGT634U_GPIO_RESET, state);
130 -
131 -       if (!state) {
132 -               printk(KERN_INFO "Reset button pressed");
133 -               ctrl_alt_del();
134 -       }
135 -
136 -       return IRQ_HANDLED;
137 -}
138 -
139 -static int __init wgt634u_init(void)
140 -{
141 -       /* There is no easy way to detect that we are running on a WGT634U
142 -        * machine. Use the MAC address as an heuristic. Netgear Inc. has
143 -        * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
144 -        */
145 -       u8 *et0mac;
146 -       int err;
147 -
148 -       if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
149 -               return -ENODEV;
150 -
151 -       et0mac = bcm47xx_bus.ssb.sprom.et0mac;
152 -
153 -       if (et0mac[0] == 0x00 &&
154 -           ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
155 -            (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
156 -               struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
157 -
158 -               printk(KERN_INFO "WGT634U machine detected.\n");
159 -
160 -               err = gpio_request(WGT634U_GPIO_RESET, "reset-buton");
161 -               if (err) {
162 -                       printk(KERN_INFO "Can not register gpio for reset button\n");
163 -                       return 0;
164 -               }
165 -
166 -               if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
167 -                                gpio_interrupt, IRQF_SHARED,
168 -                                "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
169 -                       gpio_direction_input(WGT634U_GPIO_RESET);
170 -                       gpio_intmask(WGT634U_GPIO_RESET, 1);
171 -                       ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
172 -                                           SSB_CHIPCO_IRQ_GPIO,
173 -                                           SSB_CHIPCO_IRQ_GPIO);
174 -               }
175 -
176 -               wgt634u_flash_data.width = mcore->pflash.buswidth;
177 -               wgt634u_flash_resource.start = mcore->pflash.window;
178 -               wgt634u_flash_resource.end = mcore->pflash.window
179 -                                          + mcore->pflash.window_size
180 -                                          - 1;
181 -               return platform_add_devices(wgt634u_devices,
182 -                                           ARRAY_SIZE(wgt634u_devices));
183 -       } else
184 -               return -ENODEV;
185 -}
186 -
187 -module_init(wgt634u_init);