target/linux/ath25/patches-3.18/120-spiflash.patch

   1 --- a/drivers/mtd/devices/Kconfig
   2 +++ b/drivers/mtd/devices/Kconfig
   3 @@ -120,6 +120,10 @@ config MTD_BCM47XXSFLASH
   4           registered by bcma as platform devices. This enables driver for
   5           serial flash memories (only read-only mode is implemented).
   6
   7 +config MTD_AR2315
   8 +       tristate "Atheros AR2315+ SPI Flash support"
   9 +       depends on SOC_AR2315
  10 +
  11  config MTD_SLRAM
  12         tristate "Uncached system RAM"
  13         help
  14 --- a/drivers/mtd/devices/Makefile
  15 +++ b/drivers/mtd/devices/Makefile
  16 @@ -14,6 +14,7 @@ obj-$(CONFIG_MTD_DATAFLASH)   += mtd_dataf
  17  obj-$(CONFIG_MTD_M25P80)       += m25p80.o
  18  obj-$(CONFIG_MTD_SPEAR_SMI)    += spear_smi.o
  19  obj-$(CONFIG_MTD_SST25L)       += sst25l.o
  20 +obj-$(CONFIG_MTD_AR2315)       += ar2315.o
  21  obj-$(CONFIG_MTD_BCM47XXSFLASH)        += bcm47xxsflash.o
  22  obj-$(CONFIG_MTD_ST_SPI_FSM)    += st_spi_fsm.o
  23
  24 --- /dev/null
  25 +++ b/drivers/mtd/devices/ar2315.c
  26 @@ -0,0 +1,459 @@
  27 +
  28 +/*
  29 + * MTD driver for the SPI Flash Memory support on Atheros AR2315
  30 + *
  31 + * Copyright (c) 2005-2006 Atheros Communications Inc.
  32 + * Copyright (C) 2006-2007 FON Technology, SL.
  33 + * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
  34 + * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name>
  35 + * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
  36 + *
  37 + * This code is free software; you can redistribute it and/or modify
  38 + * it under the terms of the GNU General Public License version 2 as
  39 + * published by the Free Software Foundation.
  40 + *
  41 + */
  42 +
  43 +#include <linux/kernel.h>
  44 +#include <linux/module.h>
  45 +#include <linux/types.h>
  46 +#include <linux/errno.h>
  47 +#include <linux/slab.h>
  48 +#include <linux/mtd/mtd.h>
  49 +#include <linux/mtd/partitions.h>
  50 +#include <linux/platform_device.h>
  51 +#include <linux/sched.h>
  52 +#include <linux/delay.h>
  53 +#include <linux/io.h>
  54 +#include <linux/mutex.h>
  55 +
  56 +#include "ar2315_spiflash.h"
  57 +
  58 +#define DRIVER_NAME "ar2315-spiflash"
  59 +
  60 +#define busy_wait(_priv, _condition, _wait) do { \
  61 +       while (_condition) { \
  62 +               if (_wait > 1) \
  63 +                       msleep(_wait); \
  64 +               else if ((_wait == 1) && need_resched()) \
  65 +                       schedule(); \
  66 +               else \
  67 +                       udelay(1); \
  68 +       } \
  69 +} while (0)
  70 +
  71 +enum {
  72 +       FLASH_NONE,
  73 +       FLASH_1MB,
  74 +       FLASH_2MB,
  75 +       FLASH_4MB,
  76 +       FLASH_8MB,
  77 +       FLASH_16MB,
  78 +};
  79 +
  80 +/* Flash configuration table */
  81 +struct flashconfig {
  82 +       u32 byte_cnt;
  83 +       u32 sector_cnt;
  84 +       u32 sector_size;
  85 +};
  86 +
  87 +static const struct flashconfig flashconfig_tbl[] = {
  88 +       [FLASH_NONE] = { 0, 0, 0},
  89 +       [FLASH_1MB]  = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT,
  90 +                        STM_1MB_SECTOR_SIZE},
  91 +       [FLASH_2MB]  = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT,
  92 +                        STM_2MB_SECTOR_SIZE},
  93 +       [FLASH_4MB]  = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT,
  94 +                        STM_4MB_SECTOR_SIZE},
  95 +       [FLASH_8MB]  = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT,
  96 +                        STM_8MB_SECTOR_SIZE},
  97 +       [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT,
  98 +                        STM_16MB_SECTOR_SIZE}
  99 +};
 100 +
 101 +/* Mapping of generic opcodes to STM serial flash opcodes */
 102 +enum {
 103 +       SPI_WRITE_ENABLE,
 104 +       SPI_WRITE_DISABLE,
 105 +       SPI_RD_STATUS,
 106 +       SPI_WR_STATUS,
 107 +       SPI_RD_DATA,
 108 +       SPI_FAST_RD_DATA,
 109 +       SPI_PAGE_PROGRAM,
 110 +       SPI_SECTOR_ERASE,
 111 +       SPI_BULK_ERASE,
 112 +       SPI_DEEP_PWRDOWN,
 113 +       SPI_RD_SIG,
 114 +};
 115 +
 116 +struct opcodes {
 117 +       __u16 code;
 118 +       __s8 tx_cnt;
 119 +       __s8 rx_cnt;
 120 +};
 121 +
 122 +static const struct opcodes stm_opcodes[] = {
 123 +       [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0},
 124 +       [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0},
 125 +       [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1},
 126 +       [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0},
 127 +       [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4},
 128 +       [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0},
 129 +       [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0},
 130 +       [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0},
 131 +       [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0},
 132 +       [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0},
 133 +       [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1},
 134 +};
 135 +
 136 +/* Driver private data structure */
 137 +struct spiflash_priv {
 138 +       struct mtd_info mtd;
 139 +       void __iomem *readaddr; /* memory mapped data for read  */
 140 +       void __iomem *mmraddr;  /* memory mapped register space */
 141 +       struct mutex lock;      /* serialize registers access */
 142 +};
 143 +
 144 +#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd)
 145 +
 146 +enum {
 147 +       FL_READY,
 148 +       FL_READING,
 149 +       FL_ERASING,
 150 +       FL_WRITING
 151 +};
 152 +
 153 +/*****************************************************************************/
 154 +
 155 +static u32
 156 +spiflash_read_reg(struct spiflash_priv *priv, int reg)
 157 +{
 158 +       return ioread32(priv->mmraddr + reg);
 159 +}
 160 +
 161 +static void
 162 +spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data)
 163 +{
 164 +       iowrite32(data, priv->mmraddr + reg);
 165 +}
 166 +
 167 +static u32
 168 +spiflash_wait_busy(struct spiflash_priv *priv)
 169 +{
 170 +       u32 reg;
 171 +
 172 +       busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) &
 173 +               SPI_CTL_BUSY, 0);
 174 +       return reg;
 175 +}
 176 +
 177 +static u32
 178 +spiflash_sendcmd(struct spiflash_priv *priv, int opcode, u32 addr)
 179 +{
 180 +       const struct opcodes *op;
 181 +       u32 reg, mask;
 182 +
 183 +       op = &stm_opcodes[opcode];
 184 +       reg = spiflash_wait_busy(priv);
 185 +       spiflash_write_reg(priv, SPI_FLASH_OPCODE,
 186 +                          ((u32)op->code) | (addr << 8));
 187 +
 188 +       reg &= ~SPI_CTL_TX_RX_CNT_MASK;
 189 +       reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4);
 190 +
 191 +       spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
 192 +       spiflash_wait_busy(priv);
 193 +
 194 +       if (!op->rx_cnt)
 195 +               return 0;
 196 +
 197 +       reg = spiflash_read_reg(priv, SPI_FLASH_DATA);
 198 +
 199 +       switch (op->rx_cnt) {
 200 +       case 1:
 201 +               mask = 0x000000ff;
 202 +               break;
 203 +       case 2:
 204 +               mask = 0x0000ffff;
 205 +               break;
 206 +       case 3:
 207 +               mask = 0x00ffffff;
 208 +               break;
 209 +       default:
 210 +               mask = 0xffffffff;
 211 +               break;
 212 +       }
 213 +       reg &= mask;
 214 +
 215 +       return reg;
 216 +}
 217 +
 218 +/*
 219 + * Probe SPI flash device
 220 + * Function returns 0 for failure.
 221 + * and flashconfig_tbl array index for success.
 222 + */
 223 +static int
 224 +spiflash_probe_chip(struct platform_device *pdev, struct spiflash_priv *priv)
 225 +{
 226 +       u32 sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0);
 227 +       int flash_size;
 228 +
 229 +       switch (sig) {
 230 +       case STM_8MBIT_SIGNATURE:
 231 +               flash_size = FLASH_1MB;
 232 +               break;
 233 +       case STM_16MBIT_SIGNATURE:
 234 +               flash_size = FLASH_2MB;
 235 +               break;
 236 +       case STM_32MBIT_SIGNATURE:
 237 +               flash_size = FLASH_4MB;
 238 +               break;
 239 +       case STM_64MBIT_SIGNATURE:
 240 +               flash_size = FLASH_8MB;
 241 +               break;
 242 +       case STM_128MBIT_SIGNATURE:
 243 +               flash_size = FLASH_16MB;
 244 +               break;
 245 +       default:
 246 +               dev_warn(&pdev->dev, "read of flash device signature failed!\n");
 247 +               return 0;
 248 +       }
 249 +
 250 +       return flash_size;
 251 +}
 252 +
 253 +static void
 254 +spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout)
 255 +{
 256 +       busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) &
 257 +               SPI_STATUS_WIP, timeout);
 258 +}
 259 +
 260 +static int
 261 +spiflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 262 +{
 263 +       struct spiflash_priv *priv = to_spiflash(mtd);
 264 +       const struct opcodes *op;
 265 +       u32 temp, reg;
 266 +
 267 +       if (instr->addr + instr->len > mtd->size)
 268 +               return -EINVAL;
 269 +
 270 +       mutex_lock(&priv->lock);
 271 +
 272 +       spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
 273 +       reg = spiflash_wait_busy(priv);
 274 +
 275 +       op = &stm_opcodes[SPI_SECTOR_ERASE];
 276 +       temp = ((u32)instr->addr << 8) | (u32)(op->code);
 277 +       spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp);
 278 +
 279 +       reg &= ~SPI_CTL_TX_RX_CNT_MASK;
 280 +       reg |= op->tx_cnt | SPI_CTL_START;
 281 +       spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
 282 +
 283 +       spiflash_wait_complete(priv, 20);
 284 +
 285 +       mutex_unlock(&priv->lock);
 286 +
 287 +       instr->state = MTD_ERASE_DONE;
 288 +       mtd_erase_callback(instr);
 289 +
 290 +       return 0;
 291 +}
 292 +
 293 +static int
 294 +spiflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
 295 +             u_char *buf)
 296 +{
 297 +       struct spiflash_priv *priv = to_spiflash(mtd);
 298 +
 299 +       if (!len)
 300 +               return 0;
 301 +
 302 +       if (from + len > mtd->size)
 303 +               return -EINVAL;
 304 +
 305 +       *retlen = len;
 306 +
 307 +       mutex_lock(&priv->lock);
 308 +
 309 +       memcpy_fromio(buf, priv->readaddr + from, len);
 310 +
 311 +       mutex_unlock(&priv->lock);
 312 +
 313 +       return 0;
 314 +}
 315 +
 316 +static int
 317 +spiflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
 318 +              const u8 *buf)
 319 +{
 320 +       struct spiflash_priv *priv = to_spiflash(mtd);
 321 +       u32 opcode, bytes_left;
 322 +
 323 +       *retlen = 0;
 324 +
 325 +       if (!len)
 326 +               return 0;
 327 +
 328 +       if (to + len > mtd->size)
 329 +               return -EINVAL;
 330 +
 331 +       bytes_left = len;
 332 +
 333 +       do {
 334 +               u32 read_len, reg, page_offset, spi_data = 0;
 335 +
 336 +               read_len = min(bytes_left, sizeof(u32));
 337 +
 338 +               /* 32-bit writes cannot span across a page boundary
 339 +                * (256 bytes). This types of writes require two page
 340 +                * program operations to handle it correctly. The STM part
 341 +                * will write the overflow data to the beginning of the
 342 +                * current page as opposed to the subsequent page.
 343 +                */
 344 +               page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len;
 345 +
 346 +               if (page_offset > STM_PAGE_SIZE)
 347 +                       read_len -= (page_offset - STM_PAGE_SIZE);
 348 +
 349 +               mutex_lock(&priv->lock);
 350 +
 351 +               spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
 352 +               spi_data = 0;
 353 +               switch (read_len) {
 354 +               case 4:
 355 +                       spi_data |= buf[3] << 24;
 356 +                       /* fall through */
 357 +               case 3:
 358 +                       spi_data |= buf[2] << 16;
 359 +                       /* fall through */
 360 +               case 2:
 361 +                       spi_data |= buf[1] << 8;
 362 +                       /* fall through */
 363 +               case 1:
 364 +                       spi_data |= buf[0] & 0xff;
 365 +                       break;
 366 +               default:
 367 +                       break;
 368 +               }
 369 +
 370 +               spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data);
 371 +               opcode = stm_opcodes[SPI_PAGE_PROGRAM].code |
 372 +                       (to & 0x00ffffff) << 8;
 373 +               spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode);
 374 +
 375 +               reg = spiflash_read_reg(priv, SPI_FLASH_CTL);
 376 +               reg &= ~SPI_CTL_TX_RX_CNT_MASK;
 377 +               reg |= (read_len + 4) | SPI_CTL_START;
 378 +               spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
 379 +
 380 +               spiflash_wait_complete(priv, 1);
 381 +
 382 +               mutex_unlock(&priv->lock);
 383 +
 384 +               bytes_left -= read_len;
 385 +               to += read_len;
 386 +               buf += read_len;
 387 +
 388 +               *retlen += read_len;
 389 +       } while (bytes_left != 0);
 390 +
 391 +       return 0;
 392 +}
 393 +
 394 +#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS
 395 +static const char * const part_probe_types[] = {
 396 +       "cmdlinepart", "RedBoot", "MyLoader", NULL
 397 +};
 398 +#endif
 399 +
 400 +static int
 401 +spiflash_probe(struct platform_device *pdev)
 402 +{
 403 +       struct spiflash_priv *priv;
 404 +       struct mtd_info *mtd;
 405 +       struct resource *res;
 406 +       int index;
 407 +       int result = 0;
 408 +
 409 +       priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 410 +       if (!priv)
 411 +               return -ENOMEM;
 412 +
 413 +       mutex_init(&priv->lock);
 414 +       mtd = &priv->mtd;
 415 +
 416 +       res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 417 +       priv->mmraddr = devm_ioremap_resource(&pdev->dev, res);
 418 +       if (IS_ERR(priv->mmraddr)) {
 419 +               dev_warn(&pdev->dev, "failed to map flash MMR\n");
 420 +               return PTR_ERR(priv->mmraddr);
 421 +       }
 422 +
 423 +       index = spiflash_probe_chip(pdev, priv);
 424 +       if (!index) {
 425 +               dev_warn(&pdev->dev, "found no flash device\n");
 426 +               return -ENODEV;
 427 +       }
 428 +
 429 +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 430 +       priv->readaddr = devm_ioremap_resource(&pdev->dev, res);
 431 +       if (IS_ERR(priv->readaddr)) {
 432 +               dev_warn(&pdev->dev, "failed to map flash read mem\n");
 433 +               return PTR_ERR(priv->readaddr);
 434 +       }
 435 +
 436 +       platform_set_drvdata(pdev, priv);
 437 +       mtd->name = "spiflash";
 438 +       mtd->type = MTD_NORFLASH;
 439 +       mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
 440 +       mtd->size = flashconfig_tbl[index].byte_cnt;
 441 +       mtd->erasesize = flashconfig_tbl[index].sector_size;
 442 +       mtd->writesize = 1;
 443 +       mtd->numeraseregions = 0;
 444 +       mtd->eraseregions = NULL;
 445 +       mtd->_erase = spiflash_erase;
 446 +       mtd->_read = spiflash_read;
 447 +       mtd->_write = spiflash_write;
 448 +       mtd->owner = THIS_MODULE;
 449 +
 450 +       dev_info(&pdev->dev, "%lld Kbytes flash detected\n", mtd->size >> 10);
 451 +
 452 +#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS
 453 +       /* parse redboot partitions */
 454 +
 455 +       result = mtd_device_parse_register(mtd, part_probe_types,
 456 +                                          NULL, NULL, 0);
 457 +#endif
 458 +
 459 +       return result;
 460 +}
 461 +
 462 +static int
 463 +spiflash_remove(struct platform_device *pdev)
 464 +{
 465 +       struct spiflash_priv *priv = platform_get_drvdata(pdev);
 466 +
 467 +       mtd_device_unregister(&priv->mtd);
 468 +
 469 +       return 0;
 470 +}
 471 +
 472 +static struct platform_driver spiflash_driver = {
 473 +       .driver.name = DRIVER_NAME,
 474 +       .probe = spiflash_probe,
 475 +       .remove = spiflash_remove,
 476 +};
 477 +
 478 +module_platform_driver(spiflash_driver);
 479 +
 480 +MODULE_LICENSE("GPL");
 481 +MODULE_AUTHOR("OpenWrt.org");
 482 +MODULE_AUTHOR("Atheros Communications Inc");
 483 +MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros AR2315+ SOC");
 484 +MODULE_ALIAS("platform:" DRIVER_NAME);
 485 +
 486 --- /dev/null
 487 +++ b/drivers/mtd/devices/ar2315_spiflash.h
 488 @@ -0,0 +1,106 @@
 489 +/*
 490 + * Atheros AR2315 SPI Flash Memory support header file.
 491 + *
 492 + * Copyright (c) 2005, Atheros Communications Inc.
 493 + * Copyright (C) 2006 FON Technology, SL.
 494 + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
 495 + * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name>
 496 + *
 497 + * This code is free software; you can redistribute it and/or modify
 498 + * it under the terms of the GNU General Public License version 2 as
 499 + * published by the Free Software Foundation.
 500 + *
 501 + */
 502 +#ifndef __AR2315_SPIFLASH_H
 503 +#define __AR2315_SPIFLASH_H
 504 +
 505 +#define STM_PAGE_SIZE           256
 506 +
 507 +#define SFI_WRITE_BUFFER_SIZE   4
 508 +#define SFI_FLASH_ADDR_MASK     0x00ffffff
 509 +
 510 +#define STM_8MBIT_SIGNATURE     0x13
 511 +#define STM_M25P80_BYTE_COUNT   1048576
 512 +#define STM_M25P80_SECTOR_COUNT 16
 513 +#define STM_M25P80_SECTOR_SIZE  0x10000
 514 +
 515 +#define STM_16MBIT_SIGNATURE    0x14
 516 +#define STM_M25P16_BYTE_COUNT   2097152
 517 +#define STM_M25P16_SECTOR_COUNT 32
 518 +#define STM_M25P16_SECTOR_SIZE  0x10000
 519 +
 520 +#define STM_32MBIT_SIGNATURE    0x15
 521 +#define STM_M25P32_BYTE_COUNT   4194304
 522 +#define STM_M25P32_SECTOR_COUNT 64
 523 +#define STM_M25P32_SECTOR_SIZE  0x10000
 524 +
 525 +#define STM_64MBIT_SIGNATURE    0x16
 526 +#define STM_M25P64_BYTE_COUNT   8388608
 527 +#define STM_M25P64_SECTOR_COUNT 128
 528 +#define STM_M25P64_SECTOR_SIZE  0x10000
 529 +
 530 +#define STM_128MBIT_SIGNATURE   0x17
 531 +#define STM_M25P128_BYTE_COUNT   16777216
 532 +#define STM_M25P128_SECTOR_COUNT 256
 533 +#define STM_M25P128_SECTOR_SIZE  0x10000
 534 +
 535 +#define STM_1MB_BYTE_COUNT   STM_M25P80_BYTE_COUNT
 536 +#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
 537 +#define STM_1MB_SECTOR_SIZE  STM_M25P80_SECTOR_SIZE
 538 +#define STM_2MB_BYTE_COUNT   STM_M25P16_BYTE_COUNT
 539 +#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
 540 +#define STM_2MB_SECTOR_SIZE  STM_M25P16_SECTOR_SIZE
 541 +#define STM_4MB_BYTE_COUNT   STM_M25P32_BYTE_COUNT
 542 +#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
 543 +#define STM_4MB_SECTOR_SIZE  STM_M25P32_SECTOR_SIZE
 544 +#define STM_8MB_BYTE_COUNT   STM_M25P64_BYTE_COUNT
 545 +#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
 546 +#define STM_8MB_SECTOR_SIZE  STM_M25P64_SECTOR_SIZE
 547 +#define STM_16MB_BYTE_COUNT   STM_M25P128_BYTE_COUNT
 548 +#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
 549 +#define STM_16MB_SECTOR_SIZE  STM_M25P128_SECTOR_SIZE
 550 +
 551 +/*
 552 + * ST Microelectronics Opcodes for Serial Flash
 553 + */
 554 +
 555 +#define STM_OP_WR_ENABLE       0x06     /* Write Enable */
 556 +#define STM_OP_WR_DISABLE      0x04     /* Write Disable */
 557 +#define STM_OP_RD_STATUS       0x05     /* Read Status */
 558 +#define STM_OP_WR_STATUS       0x01     /* Write Status */
 559 +#define STM_OP_RD_DATA         0x03     /* Read Data */
 560 +#define STM_OP_FAST_RD_DATA    0x0b     /* Fast Read Data */
 561 +#define STM_OP_PAGE_PGRM       0x02     /* Page Program */
 562 +#define STM_OP_SECTOR_ERASE    0xd8     /* Sector Erase */
 563 +#define STM_OP_BULK_ERASE      0xc7     /* Bulk Erase */
 564 +#define STM_OP_DEEP_PWRDOWN    0xb9     /* Deep Power-Down Mode */
 565 +#define STM_OP_RD_SIG          0xab     /* Read Electronic Signature */
 566 +
 567 +#define STM_STATUS_WIP       0x01       /* Write-In-Progress */
 568 +#define STM_STATUS_WEL       0x02       /* Write Enable Latch */
 569 +#define STM_STATUS_BP0       0x04       /* Block Protect 0 */
 570 +#define STM_STATUS_BP1       0x08       /* Block Protect 1 */
 571 +#define STM_STATUS_BP2       0x10       /* Block Protect 2 */
 572 +#define STM_STATUS_SRWD      0x80       /* Status Register Write Disable */
 573 +
 574 +/*
 575 + * SPI Flash Interface Registers
 576 + */
 577 +
 578 +#define SPI_FLASH_CTL           0x00
 579 +#define SPI_FLASH_OPCODE        0x04
 580 +#define SPI_FLASH_DATA          0x08
 581 +
 582 +#define SPI_CTL_START           0x00000100
 583 +#define SPI_CTL_BUSY            0x00010000
 584 +#define SPI_CTL_TXCNT_MASK      0x0000000f
 585 +#define SPI_CTL_RXCNT_MASK      0x000000f0
 586 +#define SPI_CTL_TX_RX_CNT_MASK  0x000000ff
 587 +#define SPI_CTL_SIZE_MASK       0x00060000
 588 +
 589 +#define SPI_CTL_CLK_SEL_MASK    0x03000000
 590 +#define SPI_OPCODE_MASK         0x000000ff
 591 +
 592 +#define SPI_STATUS_WIP         STM_STATUS_WIP
 593 +
 594 +#endif
 595 --- a/arch/mips/ath25/ar2315.c
 596 +++ b/arch/mips/ath25/ar2315.c
 597 @@ -220,6 +220,28 @@ static struct platform_device ar2315_gpi
 598         .num_resources = ARRAY_SIZE(ar2315_gpio_res)
 599  };
 600
 601 +static struct resource ar2315_spiflash_res[] = {
 602 +       {
 603 +               .name = "spiflash_read",
 604 +               .flags = IORESOURCE_MEM,
 605 +               .start = AR2315_SPI_READ_BASE,
 606 +               .end = AR2315_SPI_READ_BASE + AR2315_SPI_READ_SIZE - 1,
 607 +       },
 608 +       {
 609 +               .name = "spiflash_mmr",
 610 +               .flags = IORESOURCE_MEM,
 611 +               .start = AR2315_SPI_MMR_BASE,
 612 +               .end = AR2315_SPI_MMR_BASE + AR2315_SPI_MMR_SIZE - 1,
 613 +       },
 614 +};
 615 +
 616 +static struct platform_device ar2315_spiflash = {
 617 +       .id = 0,
 618 +       .name = "ar2315-spiflash",
 619 +       .resource = ar2315_spiflash_res,
 620 +       .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
 621 +};
 622 +
 623  void __init ar2315_init_devices(void)
 624  {
 625         /* Find board configuration */
 626 @@ -230,6 +252,8 @@ void __init ar2315_init_devices(void)
 627         ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
 628         platform_device_register(&ar2315_gpio);
 629
 630 +       platform_device_register(&ar2315_spiflash);
 631 +
 632         ar2315_eth_data.macaddr = ath25_board.config->enet0_mac;
 633         ath25_add_ethernet(0, AR2315_ENET0_BASE, "eth0_mii",
 634                            AR2315_ENET0_MII_BASE, AR2315_IRQ_ENET0,