target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch

   1 --- a/arch/mips/ath79/mach-ap136.c
   2 +++ b/arch/mips/ath79/mach-ap136.c
   3 @@ -1,5 +1,5 @@
   4  /*
   5 - * Qualcomm Atheros AP136 reference board support
   6 + * Atheros AP136 reference board support
   7   *
   8   * Copyright (c) 2012 Qualcomm Atheros
   9   * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
  10 @@ -18,23 +18,27 @@
  11   *
  12   */
  13
  14 -#include <linux/pci.h>
  15 -#include <linux/ath9k_platform.h>
  16 +#include <linux/platform_device.h>
  17 +#include <linux/ar8216_platform.h>
  18
  19 -#include "machtypes.h"
  20 +#include <asm/mach-ath79/ar71xx_regs.h>
  21 +
  22 +#include "common.h"
  23 +#include "dev-ap9x-pci.h"
  24  #include "dev-gpio-buttons.h"
  25 +#include "dev-eth.h"
  26  #include "dev-leds-gpio.h"
  27 -#include "dev-spi.h"
  28 +#include "dev-m25p80.h"
  29  #include "dev-usb.h"
  30  #include "dev-wmac.h"
  31 -#include "pci.h"
  32 +#include "machtypes.h"
  33
  34 -#define AP136_GPIO_LED_STATUS_RED      14
  35 -#define AP136_GPIO_LED_STATUS_GREEN    19
  36  #define AP136_GPIO_LED_USB             4
  37 -#define AP136_GPIO_LED_WLAN_2G         13
  38  #define AP136_GPIO_LED_WLAN_5G         12
  39 +#define AP136_GPIO_LED_WLAN_2G         13
  40 +#define AP136_GPIO_LED_STATUS_RED      14
  41  #define AP136_GPIO_LED_WPS_RED         15
  42 +#define AP136_GPIO_LED_STATUS_GREEN    19
  43  #define AP136_GPIO_LED_WPS_GREEN       20
  44
  45  #define AP136_GPIO_BTN_WPS             16
  46 @@ -43,8 +47,10 @@
  47  #define AP136_KEYS_POLL_INTERVAL       20      /* msecs */
  48  #define AP136_KEYS_DEBOUNCE_INTERVAL   (3 * AP136_KEYS_POLL_INTERVAL)
  49
  50 -#define AP136_WMAC_CALDATA_OFFSET 0x1000
  51 -#define AP136_PCIE_CALDATA_OFFSET 0x5000
  52 +#define AP136_MAC0_OFFSET              0
  53 +#define AP136_MAC1_OFFSET              6
  54 +#define AP136_WMAC_CALDATA_OFFSET      0x1000
  55 +#define AP136_PCIE_CALDATA_OFFSET      0x5000
  56
  57  static struct gpio_led ap136_leds_gpio[] __initdata = {
  58         {
  59 @@ -98,64 +104,156 @@ static struct gpio_keys_button ap136_gpi
  60         },
  61  };
  62
  63 -static struct ath79_spi_controller_data ap136_spi0_data = {
  64 -       .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
  65 -       .cs_line = 0,
  66 +static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg;
  67 +static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg;
  68 +
  69 +static struct ar8327_platform_data ap136_ar8327_data = {
  70 +       .pad0_cfg = &ap136_ar8327_pad0_cfg,
  71 +       .pad6_cfg = &ap136_ar8327_pad6_cfg,
  72 +       .port0_cfg = {
  73 +               .force_link = 1,
  74 +               .speed = AR8327_PORT_SPEED_1000,
  75 +               .duplex = 1,
  76 +               .txpause = 1,
  77 +               .rxpause = 1,
  78 +       },
  79 +       .port6_cfg = {
  80 +               .force_link = 1,
  81 +               .speed = AR8327_PORT_SPEED_1000,
  82 +               .duplex = 1,
  83 +               .txpause = 1,
  84 +               .rxpause = 1,
  85 +       },
  86  };
  87
  88 -static struct spi_board_info ap136_spi_info[] = {
  89 +static struct mdio_board_info ap136_mdio0_info[] = {
  90         {
  91 -               .bus_num        = 0,
  92 -               .chip_select    = 0,
  93 -               .max_speed_hz   = 25000000,
  94 -               .modalias       = "mx25l6405d",
  95 -               .controller_data = &ap136_spi0_data,
  96 -       }
  97 +               .bus_id = "ag71xx-mdio.0",
  98 +               .phy_addr = 0,
  99 +               .platform_data = &ap136_ar8327_data,
 100 +       },
 101  };
 102
 103 -static struct ath79_spi_platform_data ap136_spi_data = {
 104 -       .bus_num        = 0,
 105 -       .num_chipselect = 1,
 106 -};
 107 +static void __init ap136_gmac_setup(void)
 108 +{
 109 +       void __iomem *base;
 110 +       u32 t;
 111
 112 -#ifdef CONFIG_PCI
 113 -static struct ath9k_platform_data ap136_ath9k_data;
 114 +       base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
 115
 116 -static int ap136_pci_plat_dev_init(struct pci_dev *dev)
 117 -{
 118 -       if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
 119 -               dev->dev.platform_data = &ap136_ath9k_data;
 120 +       t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
 121
 122 -       return 0;
 123 -}
 124 +       t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
 125 +       t |= QCA955X_ETH_CFG_RGMII_EN;
 126
 127 -static void __init ap136_pci_init(u8 *eeprom)
 128 -{
 129 -       memcpy(ap136_ath9k_data.eeprom_data, eeprom,
 130 -              sizeof(ap136_ath9k_data.eeprom_data));
 131 +       __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
 132
 133 -       ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
 134 -       ath79_register_pci();
 135 +       iounmap(base);
 136  }
 137 -#else
 138 -static inline void ap136_pci_init(void) {}
 139 -#endif /* CONFIG_PCI */
 140
 141 -static void __init ap136_setup(void)
 142 +static void __init ap136_common_setup(void)
 143  {
 144         u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
 145
 146 +       ath79_register_m25p80(NULL);
 147 +
 148         ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
 149                                  ap136_leds_gpio);
 150         ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
 151                                         ARRAY_SIZE(ap136_gpio_keys),
 152                                         ap136_gpio_keys);
 153 -       ath79_register_spi(&ap136_spi_data, ap136_spi_info,
 154 -                          ARRAY_SIZE(ap136_spi_info));
 155 +
 156         ath79_register_usb();
 157 -       ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
 158 -       ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
 159 +       ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
 160 +       ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
 161 +
 162 +       ap136_gmac_setup();
 163 +
 164 +       ath79_register_mdio(0, 0x0);
 165 +
 166 +       ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
 167 +
 168 +       mdiobus_register_board_info(ap136_mdio0_info,
 169 +                                   ARRAY_SIZE(ap136_mdio0_info));
 170 +
 171 +       /* GMAC0 is connected to the RMGII interface */
 172 +       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 173 +       ath79_eth0_data.phy_mask = BIT(0);
 174 +       ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
 175 +
 176 +       ath79_register_eth(0);
 177 +
 178 +       /* GMAC1 is connected tot eh SGMII interface */
 179 +       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
 180 +       ath79_eth1_data.speed = SPEED_1000;
 181 +       ath79_eth1_data.duplex = DUPLEX_FULL;
 182 +
 183 +       ath79_register_eth(1);
 184 +}
 185 +
 186 +static void __init ap136_010_setup(void)
 187 +{
 188 +       /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */
 189 +       ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
 190 +       ap136_ar8327_pad0_cfg.txclk_delay_en = true;
 191 +       ap136_ar8327_pad0_cfg.rxclk_delay_en = true;
 192 +       ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
 193 +       ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
 194 +
 195 +       /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */
 196 +       ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
 197 +       ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
 198 +       ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
 199 +
 200 +       ath79_eth0_pll_data.pll_1000 = 0xa6000000;
 201 +       ath79_eth1_pll_data.pll_1000 = 0x03000101;
 202 +
 203 +       ap136_common_setup();
 204 +}
 205 +
 206 +MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
 207 +            "Atheros AP136-010 reference board",
 208 +            ap136_010_setup);
 209 +
 210 +static void __init ap136_020_setup(void)
 211 +{
 212 +       /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
 213 +       ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
 214 +       ap136_ar8327_pad0_cfg.sgmii_delay_en = true;
 215 +
 216 +       /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
 217 +       ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII;
 218 +       ap136_ar8327_pad6_cfg.txclk_delay_en = true;
 219 +       ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
 220 +       ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
 221 +       ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
 222 +
 223 +       ath79_eth0_pll_data.pll_1000 = 0x56000000;
 224 +       ath79_eth1_pll_data.pll_1000 = 0x03000101;
 225 +
 226 +       ap136_common_setup();
 227 +}
 228 +
 229 +MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020",
 230 +            "Atheros AP136-020 reference board",
 231 +            ap136_020_setup);
 232 +
 233 +/*
 234 + * AP135-020 is similar to AP136-020, any future AP135 specific init
 235 + * code can be added here.
 236 + */
 237 +static void __init ap135_020_setup(void)
 238 +{
 239 +       ap136_leds_gpio[0].name = "ap135:green:status";
 240 +       ap136_leds_gpio[1].name = "ap135:red:status";
 241 +       ap136_leds_gpio[2].name = "ap135:green:wps";
 242 +       ap136_leds_gpio[3].name = "ap135:red:wps";
 243 +       ap136_leds_gpio[4].name = "ap135:red:wlan-2g";
 244 +       ap136_leds_gpio[5].name = "ap135:red:usb";
 245 +
 246 +       ap136_020_setup();
 247  }
 248
 249 -MIPS_MACHINE(ATH79_MACH_AP136, "AP136", "Atheros AP136 reference board",
 250 -            ap136_setup);
 251 +MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020",
 252 +            "Atheros AP135-020 reference board",
 253 +            ap135_020_setup);
 254 --- a/arch/mips/ath79/machtypes.h
 255 +++ b/arch/mips/ath79/machtypes.h
 256 @@ -18,7 +18,9 @@ enum ath79_mach_type {
 257         ATH79_MACH_GENERIC = 0,
 258         ATH79_MACH_AP121,               /* Atheros AP121 reference board */
 259         ATH79_MACH_AP121_MINI,          /* Atheros AP121-MINI reference board */
 260 -       ATH79_MACH_AP136,               /* Atheros AP136 reference board */
 261 +       ATH79_MACH_AP135_020,           /* Atheros AP135-020 reference board */
 262 +       ATH79_MACH_AP136_010,           /* Atheros AP136-010 reference board */
 263 +       ATH79_MACH_AP136_020,           /* Atheros AP136-020 reference board */
 264         ATH79_MACH_AP81,                /* Atheros AP81 reference board */
 265         ATH79_MACH_DB120,               /* Atheros DB120 reference board */
 266         ATH79_MACH_PB44,                /* Atheros PB44 reference board */
 267 --- a/arch/mips/ath79/Kconfig
 268 +++ b/arch/mips/ath79/Kconfig
 269 @@ -16,7 +16,7 @@ config ATH79_MACH_AP121
 270           Atheros AP121 reference board.
 271
 272  config ATH79_MACH_AP136
 273 -       bool "Atheros AP136 reference board"
 274 +       bool "Atheros AP136/AP135 reference board"
 275         select SOC_QCA955X
 276         select ATH79_DEV_GPIO_BUTTONS
 277         select ATH79_DEV_LEDS_GPIO
 278 @@ -25,7 +25,7 @@ config ATH79_MACH_AP136
 279         select ATH79_DEV_WMAC
 280         help
 281           Say 'Y' here if you want your kernel to support the
 282 -         Atheros AP136 reference board.
 283 +         Atheros AP136 or AP135 reference boards.
 284
 285  config ATH79_MACH_AP81
 286         bool "Atheros AP81 reference board"