target/linux/ar71xx/patches-3.18/608-MIPS-ath79-ubnt-xm-add-more-boards.patch

   1 --- a/arch/mips/ath79/mach-ubnt-xm.c
   2 +++ b/arch/mips/ath79/mach-ubnt-xm.c
   3 @@ -12,16 +12,24 @@
   4
   5  #include <linux/init.h>
   6  #include <linux/pci.h>
   7 +#include <linux/platform_device.h>
   8  #include <linux/ath9k_platform.h>
   9 +#include <linux/etherdevice.h>
  10 +#include <linux/ar8216_platform.h>
  11
  12 +#include <asm/mach-ath79/ath79.h>
  13  #include <asm/mach-ath79/irq.h>
  14 +#include <asm/mach-ath79/ar71xx_regs.h>
  15
  16 +#include "common.h"
  17  #include "dev-ap9x-pci.h"
  18 +#include "dev-eth.h"
  19  #include "dev-gpio-buttons.h"
  20  #include "dev-leds-gpio.h"
  21  #include "dev-m25p80.h"
  22 +#include "dev-usb.h"
  23 +#include "dev-wmac.h"
  24  #include "machtypes.h"
  25 -#include "pci.h"
  26
  27  #define UBNT_XM_GPIO_LED_L1            0
  28  #define UBNT_XM_GPIO_LED_L2            1
  29 @@ -37,19 +45,19 @@
  30
  31  static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
  32         {
  33 -               .name           = "ubnt-xm:red:link1",
  34 +               .name           = "ubnt:red:link1",
  35                 .gpio           = UBNT_XM_GPIO_LED_L1,
  36                 .active_low     = 0,
  37         }, {
  38 -               .name           = "ubnt-xm:orange:link2",
  39 +               .name           = "ubnt:orange:link2",
  40                 .gpio           = UBNT_XM_GPIO_LED_L2,
  41                 .active_low     = 0,
  42         }, {
  43 -               .name           = "ubnt-xm:green:link3",
  44 +               .name           = "ubnt:green:link3",
  45                 .gpio           = UBNT_XM_GPIO_LED_L3,
  46                 .active_low     = 0,
  47         }, {
  48 -               .name           = "ubnt-xm:green:link4",
  49 +               .name           = "ubnt:green:link4",
  50                 .gpio           = UBNT_XM_GPIO_LED_L4,
  51                 .active_low     = 0,
  52         },
  53 @@ -66,9 +74,13 @@ static struct gpio_keys_button ubnt_xm_g
  54         }
  55  };
  56
  57 +#define UBNT_M_WAN_PHYMASK     BIT(4)
  58 +
  59  static void __init ubnt_xm_init(void)
  60  {
  61         u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
  62 +       u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
  63 +       u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
  64
  65         ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
  66                                  ubnt_xm_leds_gpio);
  67 @@ -79,9 +91,428 @@ static void __init ubnt_xm_init(void)
  68
  69         ath79_register_m25p80(NULL);
  70         ap91_pci_init(eeprom, NULL);
  71 +
  72 +       ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
  73 +       ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
  74 +       ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
  75 +       ath79_register_eth(0);
  76  }
  77
  78  MIPS_MACHINE(ATH79_MACH_UBNT_XM,
  79              "UBNT-XM",
  80              "Ubiquiti Networks XM (rev 1.0) board",
  81              ubnt_xm_init);
  82 +
  83 +MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
  84 +            ubnt_xm_init);
  85 +
  86 +static void __init ubnt_rocket_m_setup(void)
  87 +{
  88 +       ubnt_xm_init();
  89 +       ath79_register_usb();
  90 +}
  91 +
  92 +MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
  93 +            ubnt_rocket_m_setup);
  94 +
  95 +static void __init ubnt_nano_m_setup(void)
  96 +{
  97 +       ubnt_xm_init();
  98 +       ath79_register_eth(1);
  99 +}
 100 +
 101 +MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
 102 +            ubnt_nano_m_setup);
 103 +
 104 +static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
 105 +       {
 106 +               .name           = "ubnt:green:globe",
 107 +               .gpio           = 0,
 108 +               .active_low     = 1,
 109 +       }, {
 110 +               .name           = "ubnt:green:power",
 111 +               .gpio           = 11,
 112 +               .active_low     = 1,
 113 +               .default_state  = LEDS_GPIO_DEFSTATE_ON,
 114 +       }
 115 +};
 116 +
 117 +static void __init ubnt_airrouter_setup(void)
 118 +{
 119 +       u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
 120 +       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
 121 +
 122 +       ath79_register_m25p80(NULL);
 123 +       ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
 124 +
 125 +       ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
 126 +       ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
 127 +
 128 +       ath79_register_eth(1);
 129 +       ath79_register_eth(0);
 130 +       ath79_register_usb();
 131 +
 132 +       ap91_pci_init(ee, NULL);
 133 +       ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
 134 +                                ubnt_airrouter_leds_gpio);
 135 +
 136 +       ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
 137 +                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
 138 +                                        ubnt_xm_gpio_keys);
 139 +}
 140 +
 141 +MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
 142 +            ubnt_airrouter_setup);
 143 +
 144 +static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
 145 +       {
 146 +               .name           = "ubnt:orange:dome",
 147 +               .gpio           = 1,
 148 +               .active_low     = 0,
 149 +       }, {
 150 +               .name           = "ubnt:green:dome",
 151 +               .gpio           = 0,
 152 +               .active_low     = 0,
 153 +       }
 154 +};
 155 +
 156 +static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = {
 157 +       {
 158 +               .name           = "ubnt:orange:front",
 159 +               .gpio           = 1,
 160 +               .active_low     = 0,
 161 +       }, {
 162 +               .name           = "ubnt:green:front",
 163 +               .gpio           = 0,
 164 +               .active_low     = 0,
 165 +       }
 166 +};
 167 +
 168 +static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = {
 169 +       {
 170 +               .name           = "ubnt:white:front",
 171 +               .gpio           = 1,
 172 +               .active_low     = 0,
 173 +       }, {
 174 +               .name           = "ubnt:blue:front",
 175 +               .gpio           = 0,
 176 +               .active_low     = 0,
 177 +       }
 178 +};
 179 +
 180 +
 181 +static void __init ubnt_unifi_setup(void)
 182 +{
 183 +       u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
 184 +       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
 185 +
 186 +       ath79_register_m25p80(NULL);
 187 +
 188 +       ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
 189 +
 190 +       ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
 191 +       ath79_register_eth(0);
 192 +
 193 +       ap91_pci_init(ee, NULL);
 194 +
 195 +       ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
 196 +                                ubnt_unifi_leds_gpio);
 197 +
 198 +       ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
 199 +                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
 200 +                                        ubnt_xm_gpio_keys);
 201 +}
 202 +
 203 +MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
 204 +            ubnt_unifi_setup);
 205 +
 206 +
 207 +#define UBNT_UNIFIOD_PRI_PHYMASK       BIT(4)
 208 +#define UBNT_UNIFIOD_2ND_PHYMASK       (BIT(0) | BIT(1) | BIT(2) | BIT(3))
 209 +
 210 +static void __init ubnt_unifi_outdoor_setup(void)
 211 +{
 212 +       u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
 213 +       u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
 214 +       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
 215 +
 216 +       ath79_register_m25p80(NULL);
 217 +
 218 +       ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
 219 +                                UBNT_UNIFIOD_2ND_PHYMASK));
 220 +
 221 +       ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
 222 +       ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
 223 +       ath79_register_eth(0);
 224 +       ath79_register_eth(1);
 225 +
 226 +       ap91_pci_init(ee, NULL);
 227 +
 228 +       ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio),
 229 +                                ubnt_unifi_outdoor_leds_gpio);
 230 +
 231 +       ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
 232 +                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
 233 +                                        ubnt_xm_gpio_keys);
 234 +}
 235 +
 236 +MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20",
 237 +            "Ubiquiti UniFiAP Outdoor",
 238 +            ubnt_unifi_outdoor_setup);
 239 +
 240 +
 241 +static void __init ubnt_unifi_outdoor_plus_setup(void)
 242 +{
 243 +       u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
 244 +       u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
 245 +       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
 246 +
 247 +       ath79_register_m25p80(NULL);
 248 +
 249 +       ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
 250 +                                UBNT_UNIFIOD_2ND_PHYMASK));
 251 +
 252 +       ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
 253 +       ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
 254 +       ath79_register_eth(0);
 255 +       ath79_register_eth(1);
 256 +
 257 +       ap91_pci_init(ee, NULL);
 258 +
 259 +       ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio),
 260 +                                ubnt_unifi_outdoor_plus_leds_gpio);
 261 +
 262 +       ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
 263 +                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
 264 +                                        ubnt_xm_gpio_keys);
 265 +}
 266 +
 267 +MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP",
 268 +            "Ubiquiti UniFiAP Outdoor+",
 269 +            ubnt_unifi_outdoor_plus_setup);
 270 +
 271 +
 272 +static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
 273 +       {
 274 +               .name           = "ubnt:white:dome",
 275 +               .gpio           = 12,
 276 +       }, {
 277 +               .name           = "ubnt:blue:dome",
 278 +               .gpio           = 13,
 279 +       }
 280 +};
 281 +
 282 +static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = {
 283 +       {
 284 +               .desc                   = "reset",
 285 +               .type                   = EV_KEY,
 286 +               .code                   = KEY_RESTART,
 287 +               .debounce_interval      = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
 288 +               .gpio                   = 17,
 289 +               .active_low             = 1,
 290 +       }
 291 +};
 292 +
 293 +static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = {
 294 +       .mode = AR8327_PAD_MAC_RGMII,
 295 +       .txclk_delay_en = true,
 296 +       .rxclk_delay_en = true,
 297 +       .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
 298 +       .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
 299 +};
 300 +
 301 +static struct ar8327_platform_data uap_pro_ar8327_data = {
 302 +       .pad0_cfg = &uap_pro_ar8327_pad0_cfg,
 303 +       .port0_cfg = {
 304 +               .force_link = 1,
 305 +               .speed = AR8327_PORT_SPEED_1000,
 306 +               .duplex = 1,
 307 +               .txpause = 1,
 308 +               .rxpause = 1,
 309 +       },
 310 +};
 311 +
 312 +static struct mdio_board_info uap_pro_mdio0_info[] = {
 313 +       {
 314 +               .bus_id = "ag71xx-mdio.0",
 315 +               .phy_addr = 0,
 316 +               .platform_data = &uap_pro_ar8327_data,
 317 +       },
 318 +};
 319 +
 320 +#define UAP_PRO_MAC0_OFFSET            0x0000
 321 +#define UAP_PRO_MAC1_OFFSET            0x0006
 322 +#define UAP_PRO_WMAC_CALDATA_OFFSET    0x1000
 323 +#define UAP_PRO_PCI_CALDATA_OFFSET     0x5000
 324 +
 325 +static void __init ubnt_uap_pro_setup(void)
 326 +{
 327 +       u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
 328 +
 329 +       ath79_register_m25p80(NULL);
 330 +
 331 +       ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds),
 332 +                                ubnt_uap_pro_gpio_leds);
 333 +       ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
 334 +                                        ARRAY_SIZE(uap_pro_gpio_keys),
 335 +                                        uap_pro_gpio_keys);
 336 +
 337 +       ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
 338 +       ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
 339 +
 340 +       ath79_register_mdio(0, 0x0);
 341 +       mdiobus_register_board_info(uap_pro_mdio0_info,
 342 +                                   ARRAY_SIZE(uap_pro_mdio0_info));
 343 +
 344 +       ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
 345 +       ath79_init_mac(ath79_eth0_data.mac_addr,
 346 +                      eeprom + UAP_PRO_MAC0_OFFSET, 0);
 347 +
 348 +       /* GMAC0 is connected to an AR8327 switch */
 349 +       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 350 +       ath79_eth0_data.phy_mask = BIT(0);
 351 +       ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
 352 +       ath79_eth0_pll_data.pll_1000 = 0x06000000;
 353 +       ath79_register_eth(0);
 354 +}
 355 +
 356 +MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
 357 +            ubnt_uap_pro_setup);
 358 +
 359 +#define UBNT_XW_GPIO_LED_L1            11
 360 +#define UBNT_XW_GPIO_LED_L2            16
 361 +#define UBNT_XW_GPIO_LED_L3            13
 362 +#define UBNT_XW_GPIO_LED_L4            14
 363 +
 364 +static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
 365 +       {
 366 +               .name           = "ubnt:red:link1",
 367 +               .gpio           = UBNT_XW_GPIO_LED_L1,
 368 +               .active_low     = 1,
 369 +       }, {
 370 +               .name           = "ubnt:orange:link2",
 371 +               .gpio           = UBNT_XW_GPIO_LED_L2,
 372 +               .active_low     = 1,
 373 +       }, {
 374 +               .name           = "ubnt:green:link3",
 375 +               .gpio           = UBNT_XW_GPIO_LED_L3,
 376 +               .active_low     = 1,
 377 +       }, {
 378 +               .name           = "ubnt:green:link4",
 379 +               .gpio           = UBNT_XW_GPIO_LED_L4,
 380 +               .active_low     = 1,
 381 +       },
 382 +};
 383 +
 384 +static void __init ubnt_xw_init(void)
 385 +{
 386 +       u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
 387 +
 388 +       ath79_register_m25p80(NULL);
 389 +
 390 +       ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
 391 +                                ubnt_xw_leds_gpio);
 392 +       ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
 393 +                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
 394 +                                        ubnt_xm_gpio_keys);
 395 +
 396 +       ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
 397 +       ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
 398 +
 399 +
 400 +       ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
 401 +       ath79_init_mac(ath79_eth0_data.mac_addr,
 402 +                      eeprom + UAP_PRO_MAC0_OFFSET, 0);
 403 +
 404 +       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
 405 +       ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
 406 +}
 407 +
 408 +static void __init ubnt_nano_m_xw_setup(void)
 409 +{
 410 +       ubnt_xw_init();
 411 +
 412 +       /* GMAC0 is connected to an AR8326 switch */
 413 +       ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
 414 +       ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
 415 +       ath79_eth0_data.speed = SPEED_100;
 416 +       ath79_eth0_data.duplex = DUPLEX_FULL;
 417 +       ath79_register_eth(0);
 418 +}
 419 +
 420 +static void __init ubnt_loco_m_xw_setup(void)
 421 +{
 422 +       ubnt_xw_init();
 423 +
 424 +       ath79_register_mdio(0, ~BIT(1));
 425 +       ath79_eth0_data.phy_mask = BIT(1);
 426 +       ath79_register_eth(0);
 427 +}
 428 +
 429 +MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
 430 +            ubnt_nano_m_xw_setup);
 431 +
 432 +MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
 433 +            ubnt_loco_m_xw_setup);
 434 +
 435 +static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
 436 +       {
 437 +               .name      = "ubnt:blue:wlan",
 438 +               .gpio      = 0,
 439 +       }, {
 440 +               .name      = "ubnt:white:status",
 441 +               .gpio      = 1,
 442 +       },
 443 +};
 444 +
 445 +static struct gpio_keys_button airgateway_gpio_keys[] __initdata = {
 446 +       {
 447 +               .desc           = "reset",
 448 +               .type           = EV_KEY,
 449 +               .code           = KEY_RESTART,
 450 +               .debounce_interval      = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
 451 +               .gpio           = 12,
 452 +               .active_low     = 1,
 453 +       }
 454 +};
 455 +
 456 +static void __init ubnt_airgateway_setup(void)
 457 +{
 458 +       u32 t;
 459 +       u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000);
 460 +       u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
 461 +       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
 462 +
 463 +
 464 +       ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
 465 +                                    AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
 466 +                                    AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
 467 +                                    AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
 468 +                                    AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
 469 +
 470 +       t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
 471 +       t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
 472 +       ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
 473 +
 474 +       ath79_register_m25p80(NULL);
 475 +       ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds),
 476 +                                ubnt_airgateway_gpio_leds);
 477 +
 478 +       ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
 479 +                                       ARRAY_SIZE(airgateway_gpio_keys),
 480 +                                       airgateway_gpio_keys);
 481 +
 482 +       ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0);
 483 +       ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
 484 +
 485 +       ath79_register_mdio(0, 0x0);
 486 +
 487 +       ath79_register_eth(1);
 488 +       ath79_register_eth(0);
 489 +
 490 +       ath79_register_wmac(ee, NULL);
 491 +}
 492 +
 493 +MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway",
 494 +            ubnt_airgateway_setup);
 495 +
 496 --- a/arch/mips/ath79/Kconfig
 497 +++ b/arch/mips/ath79/Kconfig
 498 @@ -68,12 +68,16 @@ config ATH79_MACH_PB44
 499           Atheros PB44 reference board.
 500
 501  config ATH79_MACH_UBNT_XM
 502 -       bool "Ubiquiti Networks XM (rev 1.0) board"
 503 +       bool "Ubiquiti Networks XM/UniFi boards"
 504         select SOC_AR724X
 505 +       select SOC_AR934X
 506         select ATH79_DEV_AP9X_PCI if PCI
 507 +       select ATH79_DEV_ETH
 508         select ATH79_DEV_GPIO_BUTTONS
 509         select ATH79_DEV_LEDS_GPIO
 510         select ATH79_DEV_M25P80
 511 +       select ATH79_DEV_USB
 512 +       select ATH79_DEV_WMAC
 513         help
 514           Say 'Y' here if you want your kernel to support the
 515           Ubiquiti Networks XM (rev 1.0) board.
 516 --- a/arch/mips/ath79/machtypes.h
 517 +++ b/arch/mips/ath79/machtypes.h
 518 @@ -22,6 +22,13 @@ enum ath79_mach_type {
 519         ATH79_MACH_AP81,                /* Atheros AP81 reference board */
 520         ATH79_MACH_DB120,               /* Atheros DB120 reference board */
 521         ATH79_MACH_PB44,                /* Atheros PB44 reference board */
 522 +       ATH79_MACH_UBNT_AIRROUTER,      /* Ubiquiti AirRouter */
 523 +       ATH79_MACH_UBNT_BULLET_M,       /* Ubiquiti Bullet M */
 524 +       ATH79_MACH_UBNT_NANO_M,         /* Ubiquiti NanoStation M */
 525 +       ATH79_MACH_UBNT_ROCKET_M,       /* Ubiquiti Rocket M */
 526 +       ATH79_MACH_UBNT_UAP_PRO,        /* Ubiquiti UniFi AP Pro */
 527 +       ATH79_MACH_UBNT_UNIFI,          /* Ubiquiti Unifi */
 528 +       ATH79_MACH_UBNT_UNIFI_OUTDOOR,  /* Ubiquiti UnifiAP Outdoor */
 529         ATH79_MACH_UBNT_XM,             /* Ubiquiti Networks XM board rev 1.0 */
 530  };
 531