target/linux/ar71xx/files/arch/mips/ath79/mach-wpj558.c

   1 /*
   2  * Compex WPJ558 board support
   3  *
   4  * Copyright (c) 2012 Qualcomm Atheros
   5  * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
   6  *
   7  * Permission to use, copy, modify, and/or distribute this software for any
   8  * purpose with or without fee is hereby granted, provided that the above
   9  * copyright notice and this permission notice appear in all copies.
  10  *
  11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  18  *
  19  */
  20
  21 #include <linux/pci.h>
  22 #include <linux/phy.h>
  23 #include <linux/gpio.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/ath9k_platform.h>
  26 #include <linux/ar8216_platform.h>
  27
  28 #include <asm/mach-ath79/ar71xx_regs.h>
  29
  30 #include "common.h"
  31 #include "pci.h"
  32 #include "dev-ap9x-pci.h"
  33 #include "dev-gpio-buttons.h"
  34 #include "dev-eth.h"
  35 #include "dev-leds-gpio.h"
  36 #include "dev-m25p80.h"
  37 #include "dev-spi.h"
  38 #include "dev-wmac.h"
  39 #include "machtypes.h"
  40
  41 #define WPJ558_GPIO_LED_SIG1    14
  42 #define WPJ558_GPIO_LED_SIG2    15
  43 #define WPJ558_GPIO_LED_SIG3    22
  44 #define WPJ558_GPIO_LED_SIG4    23
  45 #define WPJ558_GPIO_BUZZER              4
  46
  47 #define WPJ558_GPIO_BTN_RESET   17
  48
  49 #define WPJ558_KEYS_POLL_INTERVAL       20      /* msecs */
  50 #define WPJ558_KEYS_DEBOUNCE_INTERVAL   (3 * WPJ558_KEYS_POLL_INTERVAL)
  51
  52 #define WPJ558_MAC_OFFSET                       0x1002
  53 #define WPJ558_WMAC_CALDATA_OFFSET      0x1000
  54
  55 static struct gpio_led wpj558_leds_gpio[] __initdata = {
  56         {
  57                 .name           = "wpj558:red:sig1",
  58                 .gpio           = WPJ558_GPIO_LED_SIG1,
  59                 .active_low     = 1,
  60         },
  61         {
  62                 .name           = "wpj558:yellow:sig2",
  63                 .gpio           = WPJ558_GPIO_LED_SIG2,
  64                 .active_low     = 1,
  65         },
  66         {
  67                 .name           = "wpj558:green:sig3",
  68                 .gpio           = WPJ558_GPIO_LED_SIG3,
  69                 .active_low     = 1,
  70         },
  71         {
  72                 .name           = "wpj558:green:sig4",
  73                 .gpio           = WPJ558_GPIO_LED_SIG4,
  74                 .active_low     = 1,
  75         },
  76         {
  77                 .name           = "wpj558:buzzer",
  78                 .gpio           = WPJ558_GPIO_BUZZER,
  79                 .active_low     = 0,
  80         }
  81 };
  82
  83 static struct gpio_keys_button wpj558_gpio_keys[] __initdata = {
  84         {
  85                 .desc           = "reset",
  86                 .type           = EV_KEY,
  87                 .code           = KEY_RESTART,
  88                 .debounce_interval = WPJ558_KEYS_DEBOUNCE_INTERVAL,
  89                 .gpio           = WPJ558_GPIO_BTN_RESET,
  90                 .active_low     = 1,
  91         },
  92 };
  93
  94 static struct ar8327_pad_cfg wpj558_ar8327_pad0_cfg = {
  95         .mode = AR8327_PAD_MAC_SGMII,
  96         .sgmii_delay_en = true,
  97 };
  98
  99 static struct ar8327_pad_cfg wpj558_ar8327_pad6_cfg = {
 100         .mode = AR8327_PAD_MAC_RGMII,
 101         .txclk_delay_en = true,
 102         .rxclk_delay_en = true,
 103         .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
 104         .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
 105 };
 106
 107 static struct ar8327_platform_data wpj558_ar8327_data = {
 108         .pad0_cfg = &wpj558_ar8327_pad0_cfg,
 109         .pad6_cfg = &wpj558_ar8327_pad6_cfg,
 110         .port0_cfg = {
 111                 .force_link = 1,
 112                 .speed = AR8327_PORT_SPEED_1000,
 113                 .duplex = 1,
 114                 .txpause = 1,
 115                 .rxpause = 1,
 116         },
 117         .port6_cfg = {
 118                 .force_link = 1,
 119                 .speed = AR8327_PORT_SPEED_1000,
 120                 .duplex = 1,
 121                 .txpause = 1,
 122                 .rxpause = 1,
 123         },
 124 };
 125
 126 static struct mdio_board_info wpj558_mdio0_info[] = {
 127         {
 128                 .bus_id = "ag71xx-mdio.0",
 129                 .phy_addr = 0,
 130                 .platform_data = &wpj558_ar8327_data,
 131         },
 132 };
 133
 134 static void __init wpj558_setup(void)
 135 {
 136         u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
 137
 138         ath79_register_m25p80(NULL);
 139         ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj558_leds_gpio),
 140                                         wpj558_leds_gpio);
 141         ath79_register_gpio_keys_polled(-1, WPJ558_KEYS_POLL_INTERVAL,
 142                                         ARRAY_SIZE(wpj558_gpio_keys),
 143                                         wpj558_gpio_keys);
 144
 145         ath79_register_wmac(art + WPJ558_WMAC_CALDATA_OFFSET, NULL);
 146
 147         ath79_register_pci();
 148
 149         mdiobus_register_board_info(wpj558_mdio0_info,
 150                                         ARRAY_SIZE(wpj558_mdio0_info));
 151         ath79_register_mdio(0, 0x0);
 152
 153         ath79_init_mac(ath79_eth0_data.mac_addr, art + WPJ558_MAC_OFFSET, 0);
 154         ath79_init_mac(ath79_eth1_data.mac_addr, art + WPJ558_MAC_OFFSET, 0);
 155
 156         ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
 157
 158         /* GMAC0 is connected to an AR8327 switch */
 159         ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 160         ath79_eth0_data.phy_mask = BIT(0);
 161         ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
 162         ath79_eth0_pll_data.pll_1000 = 0x56000000;
 163
 164         /* GMAC1 is connected to the SGMII interface */
 165         ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
 166         ath79_eth1_data.speed = SPEED_1000;
 167         ath79_eth1_data.duplex = DUPLEX_FULL;
 168         ath79_eth1_pll_data.pll_1000 = 0x03000101;
 169
 170         ath79_register_eth(0);
 171         ath79_register_eth(1);
 172 }
 173
 174 MIPS_MACHINE(ATH79_MACH_WPJ558, "WPJ558", "Compex WPJ558", wpj558_setup);