Revert "ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg"
[openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-ubnt.c
1 /*
2  *  Ubiquiti RouterStation support
3  *
4  *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
5  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
6  *  Copyright (C) 2008 Ubiquiti <support@ubnt.com>
7  *
8  *  This program is free software; you can redistribute it and/or modify it
9  *  under the terms of the GNU General Public License version 2 as published
10  *  by the Free Software Foundation.
11  */
12
13 #include <asm/mach-ath79/ath79.h>
14
15 #include "dev-eth.h"
16 #include "dev-gpio-buttons.h"
17 #include "dev-leds-gpio.h"
18 #include "dev-m25p80.h"
19 #include "dev-usb.h"
20 #include "machtypes.h"
21 #include "pci.h"
22
23 #define UBNT_RS_GPIO_LED_RF     2
24 #define UBNT_RS_GPIO_SW4        8
25
26 #define UBNT_LS_SR71_GPIO_LED_D25       0
27 #define UBNT_LS_SR71_GPIO_LED_D26       1
28 #define UBNT_LS_SR71_GPIO_LED_D24       2
29 #define UBNT_LS_SR71_GPIO_LED_D23       4
30 #define UBNT_LS_SR71_GPIO_LED_D22       5
31 #define UBNT_LS_SR71_GPIO_LED_D27       6
32 #define UBNT_LS_SR71_GPIO_LED_D28       7
33
34 #define UBNT_KEYS_POLL_INTERVAL         20      /* msecs */
35 #define UBNT_KEYS_DEBOUNCE_INTERVAL     (3 * UBNT_KEYS_POLL_INTERVAL)
36
37 static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
38         {
39                 .name           = "ubnt:green:rf",
40                 .gpio           = UBNT_RS_GPIO_LED_RF,
41                 .active_low     = 0,
42         }
43 };
44
45 static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = {
46         {
47                 .name           = "ubnt:green:d22",
48                 .gpio           = UBNT_LS_SR71_GPIO_LED_D22,
49                 .active_low     = 0,
50         }, {
51                 .name           = "ubnt:green:d23",
52                 .gpio           = UBNT_LS_SR71_GPIO_LED_D23,
53                 .active_low     = 0,
54         }, {
55                 .name           = "ubnt:green:d24",
56                 .gpio           = UBNT_LS_SR71_GPIO_LED_D24,
57                 .active_low     = 0,
58         }, {
59                 .name           = "ubnt:red:d25",
60                 .gpio           = UBNT_LS_SR71_GPIO_LED_D25,
61                 .active_low     = 0,
62         }, {
63                 .name           = "ubnt:red:d26",
64                 .gpio           = UBNT_LS_SR71_GPIO_LED_D26,
65                 .active_low     = 0,
66         }, {
67                 .name           = "ubnt:green:d27",
68                 .gpio           = UBNT_LS_SR71_GPIO_LED_D27,
69                 .active_low     = 0,
70         }, {
71                 .name           = "ubnt:green:d28",
72                 .gpio           = UBNT_LS_SR71_GPIO_LED_D28,
73                 .active_low     = 0,
74         }
75 };
76
77 static struct gpio_keys_button ubnt_gpio_keys[] __initdata = {
78         {
79                 .desc           = "sw4",
80                 .type           = EV_KEY,
81                 .code           = KEY_RESTART,
82                 .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL,
83                 .gpio           = UBNT_RS_GPIO_SW4,
84                 .active_low     = 1,
85         }
86 };
87
88 static const char *ubnt_part_probes[] = {
89         "RedBoot",
90         NULL,
91 };
92
93 static struct flash_platform_data ubnt_flash_data = {
94         .part_probes    = ubnt_part_probes,
95 };
96
97 static void __init ubnt_generic_setup(void)
98 {
99         ath79_register_m25p80(&ubnt_flash_data);
100
101         ath79_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL,
102                                         ARRAY_SIZE(ubnt_gpio_keys),
103                                         ubnt_gpio_keys);
104         ath79_register_pci();
105 }
106
107 #define UBNT_RS_WAN_PHYMASK     BIT(20)
108 #define UBNT_RS_LAN_PHYMASK     (BIT(16) | BIT(17) | BIT(18) | BIT(19))
109
110 static void __init ubnt_rs_setup(void)
111 {
112         ubnt_generic_setup();
113
114         ath79_register_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK));
115
116         ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
117         ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
118         ath79_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
119
120         /*
121          * There is Secondary MAC address duplicate problem with some
122          * UBNT HW batches.  Do not increase Secondary MAC address by 1
123          * but do workaround with 'Locally Administrated' bit.
124          */
125         ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
126         ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
127         ath79_eth1_data.speed = SPEED_100;
128         ath79_eth1_data.duplex = DUPLEX_FULL;
129
130         ath79_register_eth(0);
131         ath79_register_eth(1);
132
133         ath79_register_usb();
134
135         ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
136                                  ubnt_rs_leds_gpio);
137 }
138
139 MIPS_MACHINE(ATH79_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation",
140              ubnt_rs_setup);
141
142 #define UBNT_RSPRO_WAN_PHYMASK  BIT(4)
143 #define UBNT_RSPRO_LAN_PHYMASK  (BIT(0) | BIT(1) | BIT(2) | BIT(3))
144
145 static void __init ubnt_rspro_setup(void)
146 {
147         ubnt_generic_setup();
148
149         ath79_register_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK |
150                                  UBNT_RSPRO_LAN_PHYMASK));
151
152         ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
153         ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
154         ath79_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
155
156         /*
157          * There is Secondary MAC address duplicate problem with some
158          * UBNT HW batches.  Do not increase Secondary MAC address by 1
159          * but do workaround with 'Locally Administrated' bit.
160          */
161         ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
162         ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
163         ath79_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
164         ath79_eth1_data.speed = SPEED_1000;
165         ath79_eth1_data.duplex = DUPLEX_FULL;
166
167         ath79_register_eth(0);
168         ath79_register_eth(1);
169
170         ath79_register_usb();
171
172         ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
173                                  ubnt_rs_leds_gpio);
174 }
175
176 MIPS_MACHINE(ATH79_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro",
177              ubnt_rspro_setup);
178
179 static void __init ubnt_lsx_setup(void)
180 {
181         ubnt_generic_setup();
182 }
183
184 MIPS_MACHINE(ATH79_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup);
185
186 #define UBNT_LSSR71_PHY_MASK    BIT(1)
187
188 static void __init ubnt_lssr71_setup(void)
189 {
190         ubnt_generic_setup();
191
192         ath79_register_mdio(0, ~UBNT_LSSR71_PHY_MASK);
193
194         ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
195         ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
196         ath79_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK;
197
198         ath79_register_eth(0);
199
200         ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio),
201                                  ubnt_ls_sr71_leds_gpio);
202 }
203
204 MIPS_MACHINE(ATH79_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71",
205              ubnt_lssr71_setup);