target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c

   1 /*
   2  *  MikroTik RouterBOARD 95X support
   3  *
   4  *  Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be>
   5  *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
   6  *  Copyright (C) 2013 Kamil Trzcinski <ayufan@ayufan.eu>
   7  *
   8  *  This program is free software; you can redistribute it and/or modify it
   9  *  under the terms of the GNU General Public License version 2 as published
  10  *  by the Free Software Foundation.
  11  */
  12
  13 #define pr_fmt(fmt) "rb95x: " fmt
  14
  15 #include <linux/phy.h>
  16 #include <linux/delay.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/ath9k_platform.h>
  19 #include <linux/ar8216_platform.h>
  20 #include <linux/mtd/mtd.h>
  21 #include <linux/mtd/nand.h>
  22 #include <linux/mtd/partitions.h>
  23 #include <linux/spi/spi.h>
  24 #include <linux/spi/flash.h>
  25 #include <linux/routerboot.h>
  26 #include <linux/gpio.h>
  27
  28 #include <asm/mach-ath79/ath79.h>
  29 #include <asm/mach-ath79/ar71xx_regs.h>
  30
  31 #include "common.h"
  32 #include "dev-eth.h"
  33 #include "dev-m25p80.h"
  34 #include "dev-nfc.h"
  35 #include "dev-usb.h"
  36 #include "dev-wmac.h"
  37 #include "machtypes.h"
  38 #include "routerboot.h"
  39 #include "dev-leds-gpio.h"
  40
  41 #define RB95X_GPIO_NAND_NCE     14
  42
  43 static struct mtd_partition rb95x_nand_partitions[] = {
  44         {
  45                 .name   = "booter",
  46                 .offset = 0,
  47                 .size   = (256 * 1024),
  48                 .mask_flags = MTD_WRITEABLE,
  49         },
  50         {
  51                 .name   = "kernel",
  52                 .offset = (256 * 1024),
  53                 .size   = (4 * 1024 * 1024) - (256 * 1024),
  54         },
  55         {
  56                 .name   = "rootfs",
  57                 .offset = MTDPART_OFS_NXTBLK,
  58                 .size   = MTDPART_SIZ_FULL,
  59         },
  60 };
  61
  62 static struct gpio_led rb951ui_leds_gpio[] __initdata = {
  63         {
  64                 .name           = "rb:green:wlan",
  65                 .gpio           = 11,
  66                 .active_low     = 1,
  67         }, {
  68                 .name           = "rb:green:act",
  69                 .gpio           = 3,
  70                 .active_low     = 1,
  71         }, {
  72                 .name           = "rb:green:port1",
  73                 .gpio           = 13,
  74                 .active_low     = 1,
  75         }, {
  76                 .name           = "rb:green:port2",
  77                 .gpio           = 12,
  78                 .active_low     = 1,
  79         }, {
  80                 .name           = "rb:green:port3",
  81                 .gpio           = 4,
  82                 .active_low     = 1,
  83         }, {
  84                 .name           = "rb:green:port4",
  85                 .gpio           = 21,
  86                 .active_low     = 1,
  87         }, {
  88                 .name           = "rb:green:port5",
  89                 .gpio           = 16,
  90                 .active_low     = 1,
  91         }
  92 };
  93
  94 static struct ar8327_pad_cfg rb95x_ar8327_pad0_cfg = {
  95         .mode = AR8327_PAD_MAC_RGMII,
  96         .txclk_delay_en = true,
  97         .rxclk_delay_en = true,
  98         .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
  99         .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
 100 };
 101
 102 static struct ar8327_platform_data rb95x_ar8327_data = {
 103         .pad0_cfg = &rb95x_ar8327_pad0_cfg,
 104         .port0_cfg = {
 105                 .force_link = 1,
 106                 .speed = AR8327_PORT_SPEED_1000,
 107                 .duplex = 1,
 108                 .txpause = 1,
 109                 .rxpause = 1,
 110         }
 111 };
 112
 113 static struct mdio_board_info rb95x_mdio0_info[] = {
 114         {
 115                 .bus_id = "ag71xx-mdio.0",
 116                 .phy_addr = 0,
 117                 .platform_data = &rb95x_ar8327_data,
 118         },
 119 };
 120
 121 void __init rb95x_wlan_init(void)
 122 {
 123         char *art_buf;
 124         u8 wlan_mac[ETH_ALEN];
 125
 126         art_buf = rb_get_wlan_data();
 127         if (art_buf == NULL)
 128                 return;
 129
 130         ath79_init_mac(wlan_mac, ath79_mac_base, 11);
 131         ath79_register_wmac(art_buf + 0x1000, wlan_mac);
 132
 133         kfree(art_buf);
 134 }
 135
 136 static void rb95x_nand_select_chip(int chip_no)
 137 {
 138         switch (chip_no) {
 139         case 0:
 140                 gpio_set_value(RB95X_GPIO_NAND_NCE, 0);
 141                 break;
 142         default:
 143                 gpio_set_value(RB95X_GPIO_NAND_NCE, 1);
 144                 break;
 145         }
 146         ndelay(500);
 147 }
 148
 149 static struct nand_ecclayout rb95x_nand_ecclayout = {
 150         .eccbytes       = 6,
 151         .eccpos         = { 8, 9, 10, 13, 14, 15 },
 152         .oobavail       = 9,
 153         .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
 154 };
 155
 156 static int rb95x_nand_scan_fixup(struct mtd_info *mtd)
 157 {
 158         struct nand_chip *chip = mtd->priv;
 159
 160         if (mtd->writesize == 512) {
 161                 /*
 162                  * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
 163                  * will not be able to find the kernel that we load.
 164                  */
 165                 chip->ecc.layout = &rb95x_nand_ecclayout;
 166         }
 167
 168         return 0;
 169 }
 170
 171 void __init rb95x_nand_init(void)
 172 {
 173         gpio_request_one(RB95X_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
 174
 175         ath79_nfc_set_scan_fixup(rb95x_nand_scan_fixup);
 176         ath79_nfc_set_parts(rb95x_nand_partitions,
 177                             ARRAY_SIZE(rb95x_nand_partitions));
 178         ath79_nfc_set_select_chip(rb95x_nand_select_chip);
 179         ath79_nfc_set_swap_dma(true);
 180         ath79_register_nfc();
 181 }
 182
 183 static int __init rb95x_setup(void)
 184 {
 185         const struct rb_info *info;
 186
 187         info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x10000);
 188         if (!info)
 189                 return -EINVAL;
 190
 191         rb95x_nand_init();
 192
 193         return 0;
 194 }
 195
 196 static void __init rb951g_setup(void)
 197 {
 198         if (rb95x_setup())
 199                 return;
 200
 201         ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
 202                                    AR934X_ETH_CFG_SW_ONLY_MODE);
 203
 204         ath79_register_mdio(0, 0x0);
 205
 206         mdiobus_register_board_info(rb95x_mdio0_info,
 207                                     ARRAY_SIZE(rb95x_mdio0_info));
 208
 209         ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
 210         ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 211         ath79_eth0_data.phy_mask = BIT(0);
 212
 213         ath79_register_eth(0);
 214
 215         rb95x_wlan_init();
 216         ath79_register_usb();
 217 }
 218
 219 MIPS_MACHINE(ATH79_MACH_RB_951G, "951G", "MikroTik RouterBOARD 951G-2HnD",
 220              rb951g_setup);
 221
 222 static void __init rb951ui_setup(void)
 223 {
 224         if (rb95x_setup())
 225                 return;
 226
 227         ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
 228
 229         ath79_register_mdio(1, 0x0);
 230
 231         ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
 232         ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
 233
 234         ath79_switch_data.phy4_mii_en = 1;
 235         ath79_switch_data.phy_poll_mask = BIT(4);
 236         ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
 237         ath79_eth0_data.phy_mask = BIT(4);
 238         ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
 239         ath79_register_eth(0);
 240
 241         ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
 242         ath79_register_eth(1);
 243
 244         gpio_request_one(20, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
 245                          "USB power");
 246
 247         gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
 248                          "POE power");
 249
 250         rb95x_wlan_init();
 251         ath79_register_usb();
 252
 253         ath79_register_leds_gpio(-1, ARRAY_SIZE(rb951ui_leds_gpio),
 254                                  rb951ui_leds_gpio);
 255 }
 256
 257 MIPS_MACHINE(ATH79_MACH_RB_951U, "951HnD", "MikroTik RouterBOARD 951Ui-2HnD",
 258              rb951ui_setup);