ar71xx: WNR2200: enable control of all LEDs and buttons
[openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-dir-615-c1.c
1 /*
2  *  D-Link DIR-615 rev C1 board support
3  *
4  *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
5  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
6  *
7  *  This program is free software; you can redistribute it and/or modify it
8  *  under the terms of the GNU General Public License version 2 as published
9  *  by the Free Software Foundation.
10  */
11
12 #include <asm/mach-ath79/ath79.h>
13
14 #include "dev-eth.h"
15 #include "dev-gpio-buttons.h"
16 #include "dev-leds-gpio.h"
17 #include "dev-m25p80.h"
18 #include "dev-wmac.h"
19 #include "machtypes.h"
20 #include "nvram.h"
21
22 #define DIR_615C1_GPIO_LED_ORANGE_STATUS 1      /* ORANGE:STATUS:TRICOLOR */
23 #define DIR_615C1_GPIO_LED_BLUE_WPS     3       /* BLUE:WPS */
24 #define DIR_615C1_GPIO_LED_GREEN_WAN    4       /* GREEN:WAN:TRICOLOR */
25 #define DIR_615C1_GPIO_LED_GREEN_WANCPU 5       /* GREEN:WAN:CPU:TRICOLOR */
26 #define DIR_615C1_GPIO_LED_GREEN_WLAN   6       /* GREEN:WLAN */
27 #define DIR_615C1_GPIO_LED_GREEN_STATUS 14      /* GREEN:STATUS:TRICOLOR */
28 #define DIR_615C1_GPIO_LED_ORANGE_WAN   15      /* ORANGE:WAN:TRICOLOR */
29
30 /* buttons may need refinement */
31
32 #define DIR_615C1_GPIO_BTN_WPS          12
33 #define DIR_615C1_GPIO_BTN_RESET        21
34
35 #define DIR_615C1_KEYS_POLL_INTERVAL    20      /* msecs */
36 #define DIR_615C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615C1_KEYS_POLL_INTERVAL)
37
38 #define DIR_615C1_CONFIG_ADDR           0x1f020000
39 #define DIR_615C1_CONFIG_SIZE           0x10000
40
41 #define DIR_615C1_WLAN_MAC_ADDR         0x1f3fffb4
42
43 static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
44         {
45                 .name           = "d-link:orange:status",
46                 .gpio           = DIR_615C1_GPIO_LED_ORANGE_STATUS,
47                 .active_low     = 1,
48         }, {
49                 .name           = "d-link:blue:wps",
50                 .gpio           = DIR_615C1_GPIO_LED_BLUE_WPS,
51                 .active_low     = 1,
52         }, {
53                 .name           = "d-link:green:wan",
54                 .gpio           = DIR_615C1_GPIO_LED_GREEN_WAN,
55                 .active_low     = 1,
56         }, {
57                 .name           = "d-link:green:wancpu",
58                 .gpio           = DIR_615C1_GPIO_LED_GREEN_WANCPU,
59                 .active_low     = 1,
60         }, {
61                 .name           = "d-link:green:wlan",
62                 .gpio           = DIR_615C1_GPIO_LED_GREEN_WLAN,
63                 .active_low     = 1,
64         }, {
65                 .name           = "d-link:green:status",
66                 .gpio           = DIR_615C1_GPIO_LED_GREEN_STATUS,
67                 .active_low     = 1,
68         }, {
69                 .name           = "d-link:orange:wan",
70                 .gpio           = DIR_615C1_GPIO_LED_ORANGE_WAN,
71                 .active_low     = 1,
72         }
73
74 };
75
76 static struct gpio_keys_button dir_615c1_gpio_keys[] __initdata = {
77         {
78                 .desc           = "reset",
79                 .type           = EV_KEY,
80                 .code           = KEY_RESTART,
81                 .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
82                 .gpio           = DIR_615C1_GPIO_BTN_RESET,
83         }, {
84                 .desc           = "wps",
85                 .type           = EV_KEY,
86                 .code           = KEY_WPS_BUTTON,
87                 .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
88                 .gpio           = DIR_615C1_GPIO_BTN_WPS,
89         }
90 };
91
92 #define DIR_615C1_LAN_PHYMASK   BIT(0)
93 #define DIR_615C1_WAN_PHYMASK   BIT(4)
94 #define DIR_615C1_MDIO_MASK     (~(DIR_615C1_LAN_PHYMASK | \
95                                    DIR_615C1_WAN_PHYMASK))
96
97 static void __init dir_615c1_setup(void)
98 {
99         const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
100         u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
101         u8 mac[ETH_ALEN], wlan_mac[ETH_ALEN];
102
103         if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
104                                        "lan_mac=", mac) == 0) {
105                 ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
106                 ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
107         }
108
109         ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615C1_WLAN_MAC_ADDR), wlan_mac);
110
111         ath79_register_mdio(0, DIR_615C1_MDIO_MASK);
112
113         ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
114         ath79_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK;
115
116         ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
117         ath79_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK;
118
119         ath79_register_eth(0);
120         ath79_register_eth(1);
121
122         ath79_register_m25p80(NULL);
123
124         ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
125                                  dir_615c1_leds_gpio);
126
127         ath79_register_gpio_keys_polled(-1, DIR_615C1_KEYS_POLL_INTERVAL,
128                                         ARRAY_SIZE(dir_615c1_gpio_keys),
129                                         dir_615c1_gpio_keys);
130
131         ath79_register_wmac(eeprom, wlan_mac);
132 }
133
134 MIPS_MACHINE(ATH79_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1",
135              dir_615c1_setup);