package/platform/lantiq/ltq-vmmc/Config.in

   1 choice
   2         prompt "device selection"
   3         depends on PACKAGE_kmod-ltq-vmmc
   4         default VOICE_CPE_VMMC_WITH_DEVICE_DANUBE
   5         help
   6                 Select the target device.
   7
   8         config VOICE_CPE_VMMC_WITH_DEVICE_DANUBE
   9                 bool "Danube, Twinpass, Vinax"
  10                 depends on TARGET_lantiq_xway
  11
  12 #       config VOICE_CPE_VMMC_WITH_DEVICE_AR9
  13 #               bool "AR9 family"
  14 #               depends on TARGET_lantiq_ar9
  15
  16 #       config VOICE_CPE_VMMC_WITH_DEVICE_VR9
  17 #               bool "VR9 family"
  18 #               depends on TARGET_lantiq_vr9
  19 #
  20         config VOICE_VMMC_WITH_DEVICE_FALCON
  21                 bool "FALC-ON"
  22                 depends on (TARGET_lantiq_falcon||TARGET_lantiq_falcon_stable)
  23
  24 endchoice
  25
  26 choice
  27         depends on PACKAGE_kmod-ltq-vmmc
  28         prompt "FXS coefficients"
  29         default LTQ_VOICE_CPE_VMMC_COEF_FALCON_ETSI
  30         help
  31                 Select country specific FXS coefficient file.
  32
  33         config LTQ_VOICE_CPE_VMMC_COEF_FALCON_ETSI
  34                 bool "ETSI_T3R10: Vl:40V, Ic:25mA, Vid:25V, Vri:45Vrms, f:25Hz"
  35                 help
  36                   These coefficents contains a parameter set with line impedance Zr according to ETSI.
  37
  38                   T:   gain in transmit direction (attenuation 3dBr) [dBr]
  39                   R:   gain in receive direction (attenuation 10dBr) [dBr]
  40                   Vl:  on-hook voltage limit [V]
  41                   Ic:  off-hook loop current [mA]
  42                   Vid: low-power-standby voltage [V]
  43                   Vri: ring voltage [v]
  44                   f:   ring frequency [V]
  45
  46         config LTQ_VOICE_CPE_VMMC_COEF_FALCON_US600R
  47                 bool "USA_600R_T3R10: Vl:40V, Ic:25mA, Vid:25V, Vri:45V, f:20Hz"
  48                 help
  49                   These coefficents contains a parameter set with line impedance e.g. for USA.
  50
  51                   T:   gain in transmit direction (attenuation 3dBr) [dBr]
  52                   R:   gain in receive direction (attenuation 10dBr) [dBr]
  53                   Vl:  on-hook voltage limit [V]
  54                   Ic:  off-hook loop current [mA]
  55                   Vid: low-power-standby voltage [V]
  56                   Vri: ring voltage [v]
  57                   f:   ring frequency [V]
  58
  59         config LTQ_VOICE_CPE_VMMC_COEF_FALCON_USE_CUSTOM_FILE
  60                 bool "Select own FXS coefficient file"
  61 endchoice
  62
  63 config VOICE_CPE_VMMC_PMC
  64         depends on (VOICE_CPE_VMMC_WITH_DEVICE_AR9 || VOICE_CPE_VMMC_WITH_DEVICE_VR9)
  65         bool "Power Management Control support"
  66         default n
  67         help
  68                 Option to enable Power Management Control on AR9, VR9. Not supported for Danube.
  69
  70 config VOICE_CPE_VMMC_DISABLE_DECT_NIBBLE_SWAP
  71         bool "Disable DECT nibble swap"
  72         depends on PACKAGE_kmod-ltq-vmmc
  73         default n
  74         help
  75                 Option to disable DECT nibble swap for COSIC modem (for backward compatibility only).
  76
  77 config VOICE_CPE_VMMC_EVENT_LOGGER
  78         depends on BROKEN
  79         bool "Event logger support"
  80         depends on PACKAGE_kmod-ltq-vmmc
  81         default n
  82         help
  83                 Option to enable details traces between drv_vmmc and the voice FW
  84                 - for debugging only
  85                 - requires package ifx-evtlog
  86
  87 config VOICE_CPE_VMMC_MPS_HISTORY_SIZE
  88         int "MPS history buffer in words (0<=size<=512)"
  89         depends on PACKAGE_kmod-ltq-vmmc
  90         default "128"
  91         help
  92                 MPS history buffer (default=128 words, maximum=512 words, 0=disable)
  93                 To opimize the memory footprint in RAM, you might want to set the
  94                 buffer size to 0.
  95