package/network/config/ltq-dsl-app/files/dsl_control

   1 #!/bin/sh /etc/rc.common
   2 # Copyright (C) 2008 OpenWrt.org
   3 START=99
   4
   5 . /lib/functions.sh
   6
   7 EXTRA_COMMANDS="status lucistat"
   8 EXTRA_HELP="    status  Get DSL status information
   9         lucistat  Get status information if lua friendly format"
  10
  11 SERVICE_DAEMONIZE=1
  12 SERVICE_WRITE_PID=1
  13
  14 #
  15 # Basic functions to send CLI commands to the dsl_cpe_control daemon
  16 #
  17 dsl_cmd() {
  18         killall -0 dsl_cpe_control && (
  19                 echo "$@" > /tmp/pipe/dsl_cpe0_cmd
  20                 cat /tmp/pipe/dsl_cpe0_ack
  21         )
  22 }
  23 dsl_val() {
  24         echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
  25 }
  26
  27 #
  28 # Simple divide by 10 routine to cope with one decimal place
  29 #
  30 dbt() {
  31         local a=$(expr $1 / 10)
  32         local b=$(expr $1 % 10)
  33         echo "${a}.${b}"
  34 }
  35 #
  36 # Take a number and convert to k or meg
  37 #
  38 scale() {
  39         local val=$1
  40         local a
  41         local b
  42
  43         if [ "$val" -gt 1000000 ]; then
  44                 a=$(expr $val / 1000)
  45                 b=$(expr $a % 1000)
  46                 a=$(expr $a / 1000)
  47                 printf "%d.%03d Mb" ${a} ${b}
  48         elif [ "$val" -gt 1000 ]; then
  49                 a=$(expr $val / 1000)
  50                 printf "%d Kb" ${a}
  51         else
  52                 echo "${val} b"
  53         fi
  54 }
  55
  56 #
  57 # Read the data rates for both directions
  58 #
  59 data_rates() {
  60         local csg
  61         local dru
  62         local drd
  63         local sdru
  64         local sdrd
  65
  66         csg=$(dsl_cmd g997csg 0 1)
  67         drd=$(dsl_val "$csg" ActualDataRate)
  68
  69         csg=$(dsl_cmd g997csg 0 0)
  70         dru=$(dsl_val "$csg" ActualDataRate)
  71
  72         [ -z "$drd" ] && drd=0
  73         [ -z "$dru" ] && dru=0
  74
  75         sdrd=$(scale $drd)
  76         sdru=$(scale $dru)
  77
  78         if [ "$action" = "lucistat" ]; then
  79                 echo "dsl.data_rate_down=$drd"
  80                 echo "dsl.data_rate_up=$dru"
  81                 echo "dsl.data_rate_down_s=\"$sdrd\""
  82                 echo "dsl.data_rate_up_s=\"$sdru\""
  83         else
  84                 echo "Data Rate:                ${sdrd}/s / ${sdru}/s"
  85         fi
  86 }
  87
  88 #
  89 # Chipset
  90 #
  91 chipset() {
  92         local vig
  93         local cs
  94         local csv
  95
  96         vig=$(dsl_cmd vig)
  97         cs=$(dsl_val "$vig" DSL_ChipSetType)
  98         csv=$(dsl_val "$vig" DSL_ChipSetHWVersion)
  99
 100         if [ "$action" = "lucistat" ]; then
 101                 echo "dsl.chipset=\"${cs} ${csv}\""
 102         else
 103                 echo "Chipset:          ${cs} ${csv}"
 104         fi
 105 }
 106
 107 #
 108 # Work out how long the line has been up
 109 #
 110 line_uptime() {
 111         local ccsg
 112         local et
 113         local etr
 114         local d
 115         local h
 116         local m
 117         local s
 118         local rc=""
 119
 120         ccsg=$(dsl_cmd pmccsg 0 0 0)
 121         et=$(dsl_val "$ccsg" nElapsedTime)
 122
 123         [ -z "$et" ] && et=0
 124
 125         if [ "$action" = "lucistat" ]; then
 126                 echo "dsl.line_uptime=${et}"
 127                 return
 128         fi
 129
 130         d=$(expr $et / 86400)
 131         etr=$(expr $et % 86400)
 132         h=$(expr $etr / 3600)
 133         etr=$(expr $etr % 3600)
 134         m=$(expr $etr / 60)
 135         s=$(expr $etr % 60)
 136
 137
 138         [ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s"
 139         [ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}"
 140         [ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}"
 141         [ "${d}" -ne 0 ] && rc="${d}d ${rc}"
 142
 143         [ -z "$rc" ] && rc="down"
 144         echo "Line Uptime:              ${rc}"
 145 }
 146
 147 #
 148 # Get noise and attenuation figures
 149 #
 150 line_data() {
 151         local lsg
 152         local latnu
 153         local latnd
 154         local snru
 155         local snrd
 156
 157         lsg=$(dsl_cmd g997lsg 1 1)
 158         latnd=$(dsl_val "$lsg" LATN)
 159         snrd=$(dsl_val "$lsg" SNR)
 160
 161         lsg=$(dsl_cmd g997lsg 0 1)
 162         latnu=$(dsl_val "$lsg" LATN)
 163         snru=$(dsl_val "$lsg" SNR)
 164
 165         [ -z "$latnd" ] && latnd=0
 166         [ -z "$latnu" ] && latnu=0
 167         [ -z "$snrd" ] && snrd=0
 168         [ -z "$snru" ] && snru=0
 169
 170         latnd=$(dbt $latnd)
 171         latnu=$(dbt $latnu)
 172         snrd=$(dbt $snrd)
 173         snru=$(dbt $snru)
 174
 175         if [ "$action" = "lucistat" ]; then
 176                 echo "dsl.line_attenuation_down=$latnd"
 177                 echo "dsl.line_attenuation_up=$latnu"
 178                 echo "dsl.noise_margin_down=$snrd"
 179                 echo "dsl.noise_margin_up=$snru"
 180         else
 181                 echo "Line Attenuation: ${latnd}dB / ${latnu}dB"
 182                 echo "Noise Margin:             ${snrd}dB / ${snru}dB"
 183         fi
 184 }
 185
 186 #
 187 # Is the line up? Or what state is it in?
 188 #
 189 line_state() {
 190         local lsg=$(dsl_cmd lsg)
 191         local ls=$(dsl_val "$lsg" nLineState);
 192         local s;
 193
 194         case "$ls" in
 195                 "0x0")          s="not initialized" ;;
 196                 "0x1")          s="exception" ;;
 197                 "0x10")         s="not updated" ;;
 198                 "0xff")         s="idle request" ;;
 199                 "0x100")        s="idle" ;;
 200                 "0x1ff")        s="silent request" ;;
 201                 "0x200")        s="silent" ;;
 202                 "0x300")        s="handshake" ;;
 203                 "0x380")        s="full_init" ;;
 204                 "0x400")        s="discovery" ;;
 205                 "0x500")        s="training" ;;
 206                 "0x600")        s="analysis" ;;
 207                 "0x700")        s="exchange" ;;
 208                 "0x800")        s="showtime_no_sync" ;;
 209                 "0x801")        s="showtime_tc_sync" ;;
 210                 "0x900")        s="fastretrain" ;;
 211                 "0xa00")        s="lowpower_l2" ;;
 212                 "0xb00")        s="loopdiagnostic active" ;;
 213                 "0xb10")        s="loopdiagnostic data exchange" ;;
 214                 "0xb20")        s="loopdiagnostic data request" ;;
 215                 "0xc00")        s="loopdiagnostic complete" ;;
 216                 "0x1000000")    s="test" ;;
 217                 "0xd00")        s="resync" ;;
 218                 "0x3c0")        s="short init entry" ;;
 219                 "")             s="not running daemon"; ls="0xfff" ;;
 220                 *)              s="unknown" ;;
 221         esac
 222
 223         if [ $action = "lucistat" ]; then
 224                 echo "dsl.line_state_num=$ls"
 225                 echo "dsl.line_state_detail=\"$s\""
 226                 if [ "$ls" = "0x801" ]; then
 227                         echo "dsl.line_state=\"UP\""
 228                 else
 229                         echo "dsl.line_state=\"DOWN\""
 230                 fi
 231         else
 232                 if [ "$ls" = "0x801" ]; then
 233                         echo "Line State:               UP [$ls: $s]"
 234                 else
 235                         echo "Line State:               DOWN [$ls: $s]"
 236                 fi
 237         fi
 238 }
 239
 240 #
 241 # Main status routine
 242 #
 243 status() {
 244         chipset
 245         line_state
 246         data_rates
 247         line_data
 248         line_uptime
 249 }
 250
 251 #
 252 # Luci (lua) compatible version that's easy to parse
 253 #
 254 lucistat() {
 255         echo "local dsl={}"
 256         status
 257         echo "return dsl"
 258 }
 259
 260
 261 annex_b=10_00_10_00_00_04_00_00
 262 annex_bdmt=10_00_00_00_00_00_00_00
 263 annex_b2=00_00_10_00_00_00_00_00
 264 annex_b2p=00_00_00_00_00_04_00_00
 265 annex_a=04_01_04_00_00_01_00_00
 266 annex_at1=01_00_00_00_00_00_00_00
 267 annex_alite=00_01_00_00_00_00_00_00
 268 annex_admt=04_00_00_00_00_00_00_00
 269 annex_a2=00_00_04_00_00_00_00_00
 270 annex_a2p=00_00_00_00_00_01_00_00
 271 annex_l=00_00_00_00_04_00_00_00
 272 annex_m=00_00_00_00_40_00_04_00
 273 annex_m2=00_00_00_00_40_00_00_00
 274 annex_m2p=00_00_00_00_00_00_04_00
 275
 276 #
 277 # Simple start routine
 278 #
 279 start() {
 280         local annex
 281         local fwannex
 282         local xtu
 283         config_load network
 284         config_get annex adsl annex
 285         config_get fwannex adsl fwannex
 286
 287         # get xtu
 288         eval "xtu=\"\${annex_$annex}\""
 289
 290         # check for invalid annex mode
 291         [ -n "${annex}" -a -z "${xtu}" ] &&
 292                 echo "unknown annex mode $annex"
 293
 294         # check for invalid fw annex mode
 295         [[ "$fwannex" != "a" && "$fwannex" != "b" ]] &&
 296                 echo "invalid fwannex: $fwannex"
 297
 298         # start CPE dsl daemon in the background
 299         service_start /sbin/dsl_cpe_control -i${xtu} \
 300                         -n /sbin/dsl_notify.sh \
 301                         -f /lib/firmware/dsl-fw-${fwannex}.bin
 302 }
 303
 304 #
 305 # For stop we want to simulate the notification call for when
 306 # the line goes down, so that we can stop the ppp link before
 307 # we die.
 308 #
 309 stop() {
 310         DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
 311         DSL_INTERFACE_STATUS="DOWN" \
 312         /sbin/dsl_notify.sh
 313
 314         service_stop /sbin/dsl_cpe_control
 315 }
 316