package/hostapd/files/hostapd.sh

   1 hostapd_set_bss_options() {
   2         local var="$1"
   3         local vif="$2"
   4         local enc wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wps_possible
   5
   6         config_get enc "$vif" encryption
   7         config_get wep_rekey        "$vif" wep_rekey        # 300
   8         config_get wpa_group_rekey  "$vif" wpa_group_rekey  # 300
   9         config_get wpa_pair_rekey   "$vif" wpa_pair_rekey   # 300
  10         config_get wpa_master_rekey "$vif" wpa_master_rekey # 640
  11         config_get_bool ap_isolate "$vif" isolate 0
  12
  13         config_get device "$vif" device
  14         config_get hwmode "$device" hwmode
  15         config_get phy "$device" phy
  16
  17         append "$var" "ctrl_interface=/var/run/hostapd-$phy" "$N"
  18
  19         if [ "$ap_isolate" -gt 0 ]; then
  20                 append "$var" "ap_isolate=$ap_isolate" "$N"
  21         fi
  22
  23         # Examples:
  24         # psk-mixed/tkip        => WPA1+2 PSK, TKIP
  25         # wpa-psk2/tkip+aes     => WPA2 PSK, CCMP+TKIP
  26         # wpa2/tkip+aes         => WPA2 RADIUS, CCMP+TKIP
  27         # ...
  28
  29         # TODO: move this parsing function somewhere generic, so that
  30         # later it can be reused by drivers that don't use hostapd
  31
  32         # crypto defaults: WPA2 vs WPA1
  33         case "$enc" in
  34                 wpa2*|*psk2*)
  35                         wpa=2
  36                         crypto="CCMP"
  37                 ;;
  38                 *mixed*)
  39                         wpa=3
  40                         crypto="CCMP TKIP"
  41                 ;;
  42                 *)
  43                         wpa=1
  44                         crypto="TKIP"
  45                 ;;
  46         esac
  47
  48         # explicit override for crypto setting
  49         case "$enc" in
  50                 *tkip+aes|*tkip+ccmp|*aes+tkip|*ccmp+tkip) crypto="CCMP TKIP";;
  51                 *aes|*ccmp) crypto="CCMP";;
  52                 *tkip) crypto="TKIP";;
  53         esac
  54
  55         # enforce CCMP for 11ng and 11na
  56         case "$hwmode:$crypto" in
  57                 *ng:TKIP|*na:TKIP) crypto="CCMP TKIP";;
  58         esac
  59
  60         # use crypto/auth settings for building the hostapd config
  61         case "$enc" in
  62                 *psk*)
  63                         config_get psk "$vif" key
  64                         if [ ${#psk} -eq 64 ]; then
  65                                 append "$var" "wpa_psk=$psk" "$N"
  66                         else
  67                                 append "$var" "wpa_passphrase=$psk" "$N"
  68                         fi
  69                         wps_possible=1
  70                         [ -n "$wpa_group_rekey"  ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
  71                         [ -n "$wpa_pair_rekey"   ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey"    "$N"
  72                         [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey"  "$N"
  73                 ;;
  74                 *wpa*)
  75                         # required fields? formats?
  76                         # hostapd is particular, maybe a default configuration for failures
  77                         config_get auth_server "$vif" auth_server
  78                         [ -z "$auth_server" ] && config_get auth_server "$vif" server
  79                         append "$var" "auth_server_addr=$auth_server" "$N"
  80                         config_get auth_port "$vif" auth_port
  81                         [ -z "$auth_port" ] && config_get auth_port "$vif" port
  82                         auth_port=${auth_port:-1812}
  83                         append "$var" "auth_server_port=$auth_port" "$N"
  84                         config_get auth_secret "$vif" auth_secret
  85                         [ -z "$auth_secret" ] && config_get auth_secret "$vif" key
  86                         append "$var" "auth_server_shared_secret=$auth_secret" "$N"
  87                         config_get acct_server "$vif" acct_server
  88                         [ -n "$acct_server" ] && append "$var" "acct_server_addr=$acct_server" "$N"
  89                         config_get acct_port "$vif" acct_port
  90                         [ -n "$acct_port" ] && acct_port=${acct_port:-1813}
  91                         [ -n "$acct_port" ] && append "$var" "acct_server_port=$acct_port" "$N"
  92                         config_get acct_secret "$vif" acct_secret
  93                         [ -n "$acct_secret" ] && append "$var" "acct_server_shared_secret=$acct_secret" "$N"
  94                         config_get nasid "$vif" nasid
  95                         append "$var" "nas_identifier=$nasid" "$N"
  96                         append "$var" "eapol_key_index_workaround=1" "$N"
  97                         append "$var" "ieee8021x=1" "$N"
  98                         append "$var" "wpa_key_mgmt=WPA-EAP" "$N"
  99                         [ -n "$wpa_group_rekey"  ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
 100                         [ -n "$wpa_pair_rekey"   ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey"    "$N"
 101                         [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey"  "$N"
 102                 ;;
 103                 *wep*)
 104                         config_get key "$vif" key
 105                         key="${key:-1}"
 106                         case "$key" in
 107                                 [1234])
 108                                         for idx in 1 2 3 4; do
 109                                                 local zidx
 110                                                 zidx=$(($idx - 1))
 111                                                 config_get ckey "$vif" "key${idx}"
 112                                                 [ -n "$ckey" ] && \
 113                                                         append "$var" "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N"
 114                                         done
 115                                         append "$var" "wep_default_key=$((key - 1))"  "$N"
 116                                 ;;
 117                                 *)
 118                                         append "$var" "wep_key0=$(prepare_key_wep "$key")" "$N"
 119                                         append "$var" "wep_default_key=0" "$N"
 120                                         [ -n "$wep_rekey" ] && append "$var" "wep_rekey_period=$wep_rekey" "$N"
 121                                 ;;
 122                         esac
 123                         case "$enc" in
 124                                 *shared*)
 125                                         auth_algs=2
 126                                 ;;
 127                                 *mixed*)
 128                                         auth_algs=3
 129                                 ;;
 130                         esac
 131                         wpa=0
 132                         crypto=
 133                 ;;
 134                 *)
 135                         wpa=0
 136                         crypto=
 137                 ;;
 138         esac
 139         append "$var" "auth_algs=${auth_algs:-1}" "$N"
 140         append "$var" "wpa=$wpa" "$N"
 141         [ -n "$crypto" ] && append "$var" "wpa_pairwise=$crypto" "$N"
 142         [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
 143
 144         config_get ssid "$vif" ssid
 145         config_get bridge "$vif" bridge
 146         config_get ieee80211d "$vif" ieee80211d
 147         config_get iapp_interface "$vif" iapp_interface
 148
 149         config_get_bool wps_pbc "$vif" wps_pushbutton 0
 150         config_get_bool wps_label "$vif" wps_label 0
 151
 152         config_get config_methods "$vif" wps_config
 153         [ "$wps_pbc" -gt 0 ] && append config_methods push_button
 154
 155         [ -n "$wps_possible" -a -n "$config_methods" ] && {
 156                 config_get device_type "$vif" wps_device_type "6-0050F204-1"
 157                 config_get device_name "$vif" wps_device_name "OpenWrt AP"
 158                 config_get manufacturer "$vif" wps_manufacturer "openwrt.org"
 159
 160                 append "$var" "eap_server=1" "$N"
 161                 append "$var" "wps_state=2" "$N"
 162                 append "$var" "ap_setup_locked=1" "$N"
 163                 append "$var" "device_type=$device_type" "$N"
 164                 append "$var" "device_name=$device_name" "$N"
 165                 append "$var" "manufacturer=$manufacturer" "$N"
 166                 append "$var" "config_methods=$config_methods" "$N"
 167         }
 168
 169         append "$var" "ssid=$ssid" "$N"
 170         [ -n "$bridge" ] && append "$var" "bridge=$bridge" "$N"
 171         [ -n "$ieee80211d" ] && append "$var" "ieee80211d=$ieee80211d" "$N"
 172         [ -n "$iapp_interface" ] && append "$var" iapp_interface=$(uci_get_state network "$iapp_interface" ifname "$iapp_interface") "$N"
 173
 174         if [ "$wpa" -ge "2" ]
 175         then
 176                 # RSN -> allow preauthentication
 177                 config_get rsn_preauth "$vif" rsn_preauth
 178                 if [ -n "$bridge" -a "$rsn_preauth" = 1 ]
 179                 then
 180                         append "$var" "rsn_preauth=1" "$N"
 181                         append "$var" "rsn_preauth_interfaces=$bridge" "$N"
 182                 fi
 183
 184                 # RSN -> allow management frame protection
 185                 config_get ieee80211w "$vif" ieee80211w
 186                 case "$ieee80211w" in
 187                         [012])
 188                                 append "$var" "ieee80211w=$ieee80211w" "$N"
 189                                 [ "$ieee80211w" -gt "0" ] && {
 190                                         config_get ieee80211w_max_timeout "$vif" ieee80211w_max_timeout
 191                                         config_get ieee80211w_retry_timeout "$vif" ieee80211w_retry_timeout
 192                                         [ -n "$ieee80211w_max_timeout" ] && \
 193                                                 append "$var" "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
 194                                         [ -n "$ieee80211w_retry_timeout" ] && \
 195                                                 append "$var" "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
 196                                 }
 197                         ;;
 198                 esac
 199         fi
 200 }
 201
 202 hostapd_set_log_options() {
 203         local var="$1"
 204         local cfg="$2"
 205         local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
 206
 207         config_get log_level "$cfg" log_level 2
 208
 209         config_get_bool log_80211  "$cfg" log_80211  1
 210         config_get_bool log_8021x  "$cfg" log_8021x  1
 211         config_get_bool log_radius "$cfg" log_radius 1
 212         config_get_bool log_wpa    "$cfg" log_wpa    1
 213         config_get_bool log_driver "$cfg" log_driver 1
 214         config_get_bool log_iapp   "$cfg" log_iapp   1
 215         config_get_bool log_mlme   "$cfg" log_mlme   1
 216
 217         local log_mask=$((       \
 218                 ($log_80211  << 0) | \
 219                 ($log_8021x  << 1) | \
 220                 ($log_radius << 2) | \
 221                 ($log_wpa    << 3) | \
 222                 ($log_driver << 4) | \
 223                 ($log_iapp   << 5) | \
 224                 ($log_mlme   << 6)   \
 225         ))
 226
 227         append "$var" "logger_syslog=$log_mask" "$N"
 228         append "$var" "logger_syslog_level=$log_level" "$N"
 229         append "$var" "logger_stdout=$log_mask" "$N"
 230         append "$var" "logger_stdout_level=$log_level" "$N"
 231 }
 232
 233 hostapd_setup_vif() {
 234         local vif="$1"
 235         local driver="$2"
 236         local ifname device channel hwmode
 237
 238         hostapd_cfg=
 239
 240         config_get ifname "$vif" ifname
 241         config_get device "$vif" device
 242         config_get channel "$device" channel
 243         config_get hwmode "$device" hwmode
 244
 245         hostapd_set_log_options hostapd_cfg "$device"
 246         hostapd_set_bss_options hostapd_cfg "$vif"
 247
 248         case "$hwmode" in
 249                 *bg|*gdt|*gst|*fh) hwmode=g;;
 250                 *adt|*ast) hwmode=a;;
 251         esac
 252         [ "$channel" = auto ] && channel=
 253         [ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
 254         cat > /var/run/hostapd-$ifname.conf <<EOF
 255 driver=$driver
 256 interface=$ifname
 257 ${hwmode:+hw_mode=${hwmode#11}}
 258 ${channel:+channel=$channel}
 259 $hostapd_cfg
 260 EOF
 261         hostapd -P /var/run/wifi-$ifname.pid -B /var/run/hostapd-$ifname.conf
 262 }
 263