From 367c0517871ac6d9d4b9d5b2efc0fb0a04588ce4 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 5 Dec 2015 15:45:43 +0000 Subject: [PATCH] lantiq: sync spi-xway driver with trunk r47770 Signed-off-by: Felix Fietkau git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47792 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../0033-SPI-MIPS-lantiq-adds-spi-xway.patch | 52 +++++++++++++++++----- 1 file changed, 40 insertions(+), 12 deletions(-) diff --git a/target/linux/lantiq/patches-3.18/0033-SPI-MIPS-lantiq-adds-spi-xway.patch b/target/linux/lantiq/patches-3.18/0033-SPI-MIPS-lantiq-adds-spi-xway.patch index ed00b34336..910433f345 100644 --- a/target/linux/lantiq/patches-3.18/0033-SPI-MIPS-lantiq-adds-spi-xway.patch +++ b/target/linux/lantiq/patches-3.18/0033-SPI-MIPS-lantiq-adds-spi-xway.patch @@ -42,7 +42,7 @@ Signed-off-by: John Crispin +obj-$(CONFIG_SPI_XWAY) += spi-xway.o --- /dev/null +++ b/drivers/spi/spi-xway.c -@@ -0,0 +1,975 @@ +@@ -0,0 +1,1003 @@ +/* + * Lantiq SoC SPI controller + * @@ -184,8 +184,10 @@ Signed-off-by: John Crispin + +#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ +#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */ -+#define LTQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */ -+#define LTQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */ ++#define LTQ_SPI_IRNEN_T BIT(0) /* Transmit end interrupt request */ ++#define LTQ_SPI_IRNEN_R BIT(1) /* Receive end interrupt request */ ++#define LTQ_SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */ ++#define LTQ_SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */ +#define LTQ_SPI_IRNEN_ALL 0xF + +struct ltq_spi { @@ -214,6 +216,9 @@ Signed-off-by: John Crispin + u16 rxfs; + unsigned dma_support:1; + unsigned cfg_mode:1; ++ ++ u32 irnen_t; ++ u32 irnen_r; +}; + +static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi) @@ -517,6 +522,9 @@ Signed-off-by: John Crispin +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + ++ if (ltq_spi_wait_ready(hw)) ++ dev_err(&spi->dev, "wait failed\n"); ++ + switch (cs) { + case BITBANG_CS_ACTIVE: + ltq_spi_bits_per_word_set(spi); @@ -547,8 +555,6 @@ Signed-off-by: John Crispin + if (bits_per_word > 32) + return -EINVAL; + -+ ltq_spi_config_mode_set(hw); -+ + return 0; +} + @@ -661,10 +667,22 @@ Signed-off-by: John Crispin +static void ltq_spi_rxreq_set(struct ltq_spi *hw) +{ + u32 rxreq, rxreq_max, rxtodo; ++ u32 fstat, fifo_fill; + + rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK; + + /* ++ * Check if there is remaining data in the FIFO before starting a new ++ * receive request. The controller might have processed some more data ++ * since the last FIFO poll. ++ */ ++ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT); ++ fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT) ++ & LTQ_SPI_FSTAT_RXFFL_MASK); ++ if (fifo_fill) ++ return; ++ ++ /* + * In RX-only mode the serial clock is activated only after writing + * the expected amount of RX bytes into RXREQ register. + * To avoid receive overflows at high clocks it is better to request @@ -744,6 +762,8 @@ Signed-off-by: John Crispin + /* Disable all interrupts */ + ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN); + ++ dev_err(hw->dev, "error %x\n", ltq_spi_reg_read(hw, LTQ_SPI_STAT)); ++ + /* Clear all error flags */ + ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); + @@ -780,22 +800,22 @@ Signed-off-by: John Crispin + if (hw->tx) { + /* Initially fill TX FIFO with as much data as possible */ + ltq_spi_txfifo_write(hw); -+ irq_flags |= LTQ_SPI_IRNEN_T; ++ irq_flags |= hw->irnen_t; + + /* Always enable RX interrupt in Full Duplex mode */ + if (hw->rx) -+ irq_flags |= LTQ_SPI_IRNEN_R; ++ irq_flags |= hw->irnen_r; + } else if (hw->rx) { + /* Start RX clock */ + ltq_spi_rxreq_set(hw); + + /* Enable RX interrupt to receive data from RX FIFOs */ -+ irq_flags |= LTQ_SPI_IRNEN_R; ++ irq_flags |= hw->irnen_r; + } + + /* Enable TX or RX interrupts */ + ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN); -+ wait_for_completion_interruptible(&hw->done); ++ wait_for_completion(&hw->done); + + /* Disable all interrupts */ + ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN); @@ -895,10 +915,18 @@ Signed-off-by: John Crispin + hw->bitbang.setup_transfer = ltq_spi_setup_transfer; + hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs; + -+ if (of_machine_is_compatible("lantiq,ase")) ++ if (of_machine_is_compatible("lantiq,ase")) { + master->num_chipselect = 3; -+ else ++ ++ hw->irnen_t = LTQ_SPI_IRNEN_T_XWAY; ++ hw->irnen_r = LTQ_SPI_IRNEN_R_XWAY; ++ } else { + master->num_chipselect = 6; ++ ++ hw->irnen_t = LTQ_SPI_IRNEN_T; ++ hw->irnen_r = LTQ_SPI_IRNEN_R; ++ } ++ + master->bus_num = pdev->id; + master->setup = ltq_spi_setup; + master->cleanup = ltq_spi_cleanup; @@ -913,7 +941,7 @@ Signed-off-by: John Crispin + /* Read module capabilities */ + id = ltq_spi_reg_read(hw, LTQ_SPI_ID); + hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK; -+ hw->rxfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK; ++ hw->rxfs = (id >> LTQ_SPI_ID_RXFS_SHIFT) & LTQ_SPI_ID_RXFS_MASK; + hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0; + + ltq_spi_config_mode_set(hw); -- 2.11.0