6 years agoCC: hostapd: properly enable 802.11w support
hauke [Sat, 29 Aug 2015 20:32:26 +0000 (20:32 +0000)]
CC: hostapd: properly enable 802.11w support
backport of r46737

Add CONFIG_IEEE80211W variable to DRIVER_MAKEOPTS so that 802.11w
support is properly compiled in full variant.

This fixes #20179

Signed-off-by: Janusz Dziemidowicz <rraptorr@nails.eu.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46751 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: broadcom-wl: add interface after bridge is up
hauke [Sat, 29 Aug 2015 20:05:41 +0000 (20:05 +0000)]
CC: broadcom-wl: add interface after bridge is up
backport of r46749

Without this patch adding the wifi device to the bridge may fail
because the bridge is not already configured when the wifi device gets
configured. This patch makes broadcom-wl wait till the bridge is ready.

This fixes #17262

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46750 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: broadcom-wl: fix bash comparison error
hauke [Sat, 29 Aug 2015 17:40:11 +0000 (17:40 +0000)]
CC: broadcom-wl: fix bash comparison error
Backport of r46746

This fixes #17495

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46748 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: broadcom-wl: fix section mismatches in broadcom-wl driver
hauke [Sat, 29 Aug 2015 17:39:36 +0000 (17:39 +0000)]
CC: broadcom-wl: fix section mismatches in broadcom-wl driver
Backport of r46745

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46747 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agobrcm47xx: fix Linksys E1200 V2 image filename
rmilecki [Sat, 29 Aug 2015 09:28:31 +0000 (09:28 +0000)]
brcm47xx: fix Linksys E1200 V2 image filename

Drop unwanted suffix (copy & paste mistake).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46742

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46743 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomac80211: add pending brcmfmac patch fixing warm reboots
rmilecki [Thu, 27 Aug 2015 14:58:00 +0000 (14:58 +0000)]
mac80211: add pending brcmfmac patch fixing warm reboots

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46739

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46740 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomac80211: update brcmfmac to the latest version
rmilecki [Wed, 26 Aug 2015 22:57:54 +0000 (22:57 +0000)]
mac80211: update brcmfmac to the latest version

This also adds one patchset of pending changes that fix support for
multiple interfaces. It was somehow broken.
Driver couldn't correctly match firmware and system interfaces resulting
in not working APs and WARNINGs.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46736 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomac80211: group last brcmfmac changes into (half) patchset
rmilecki [Wed, 26 Aug 2015 22:57:29 +0000 (22:57 +0000)]
mac80211: group last brcmfmac changes into (half) patchset

This prepares some place for backporting extra patches.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46735 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agobcm53xx: add support for Netgear R7000
rmilecki [Wed, 26 Aug 2015 16:20:39 +0000 (16:20 +0000)]
bcm53xx: add support for Netgear R7000

Backport of r46363 r46730 r46731 r46732.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46733 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: brcm63xx: fix WAP-5813n default network config
jogo [Wed, 26 Aug 2015 13:04:13 +0000 (13:04 +0000)]
CC: brcm63xx: fix WAP-5813n default network config
/etc/uci-defaults/02_network had a typo, making it generate the wrong
network config.

Closes #20407.

Backport of r46727.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46728 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: mvebu: kirkwood: fix ehci-orion probe if generic-phy isn't enabled
jogo [Sun, 23 Aug 2015 13:37:42 +0000 (13:37 +0000)]
CC: mvebu: kirkwood: fix ehci-orion probe if generic-phy isn't enabled
Properly treat -ENOSYS as no PHY, else ehci-orion won't work without
generic phy support.

Backport of r46711.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46712 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: mac80211: disable ipw2x00 for big endian targets
jogo [Sun, 23 Aug 2015 09:41:27 +0000 (09:41 +0000)]
CC: mac80211: disable ipw2x00 for big endian targets
The ipw2x00 drivers assume that the system they are running is little
endian, and access everything in native byte order. When run on a big
endian system, everything breaks apart.

Since fixing this is non trivial on a first glance, disable them for
big endian targets.

Backport of r46708.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46710 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: brcm63xx: ensure dummy byte is set for mapped spi flash with fast read
jogo [Sun, 23 Aug 2015 09:41:07 +0000 (09:41 +0000)]
CC: brcm63xx: ensure dummy byte is set for mapped spi flash with fast read
Some CFEs seem to misconfigure the mapped memory flash access with
fast read but without a dummy byte, causing all accesses to be prefixed
with 0xff.
This of course breaks reading out the nvram, so do not just move back to
single i/o accessors, but also ensure that the dummy byte is correctly

Backport of r46707.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46709 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomvebu: fix cobra chainmask (backport of r46697)
kaloz [Fri, 21 Aug 2015 08:06:07 +0000 (08:06 +0000)]
mvebu: fix cobra chainmask (backport of r46697)

Thanks Sebastian for spotting it.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46698 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomwlwifi: downgrade to
kaloz [Thu, 20 Aug 2015 20:45:16 +0000 (20:45 +0000)]
mwlwifi: downgrade to

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46695 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomwlwifi: fix commit hash for
kaloz [Wed, 19 Aug 2015 08:44:26 +0000 (08:44 +0000)]
mwlwifi: fix commit hash for

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46692 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomvebu: add support for the Linksys boot counter (backport of r46690)
kaloz [Wed, 19 Aug 2015 08:35:41 +0000 (08:35 +0000)]
mvebu: add support for the Linksys boot counter (backport of r46690)

The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46691 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agouhttpd: we don't know where the device is located, so reflect that in the cert
kaloz [Wed, 19 Aug 2015 08:21:20 +0000 (08:21 +0000)]
uhttpd: we don't know where the device is located, so reflect that in the cert

backport of r46688

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46689 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomwlwifi: upgrade to
kaloz [Tue, 18 Aug 2015 11:20:59 +0000 (11:20 +0000)]
mwlwifi: upgrade to

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46686 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoxz: update to version 5.2.1
hauke [Mon, 17 Aug 2015 19:23:34 +0000 (19:23 +0000)]
xz: update to version 5.2.1

Backport of 46603.

This adds support for symbol versioning which is needed on
CentOs/RedHat 7 to fix #20134.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46681 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: kernel: update 3.18 to 3.18.20
hauke [Mon, 17 Aug 2015 19:01:16 +0000 (19:01 +0000)]
CC: kernel: update 3.18 to 3.18.20
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46680 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoprocd: fix seccomp build on some architectures
hauke [Mon, 17 Aug 2015 18:59:00 +0000 (18:59 +0000)]
procd: fix seccomp build on some architectures

Backport of r46612.

fix generating syscall-names.h

Sometimes the syscall number is not defined with a number but with an
offset to an other syscall and then make_syscall_h.sh created some
broken header file.

For example the bit/syscall.h from musl for i386 has this:

  #define __NR_timer_create     259
  #define __NR_timer_settime    (__NR_timer_create+1)

With this patch the resulting array looks like this:

 [259] = "timer_create",
 [(__NR_timer_create+1)] = "timer_settime",

This closes #20195.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46679 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: uhttpd: pass X-HTTP-Method-Override header to cgi scripts
jow [Mon, 17 Aug 2015 16:41:53 +0000 (16:41 +0000)]
CC: uhttpd: pass X-HTTP-Method-Override header to cgi scripts
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46677

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46678 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agougps: update to latest git HEAD
blogic [Mon, 17 Aug 2015 13:19:01 +0000 (13:19 +0000)]
ugps: update to latest git HEAD

fixes 2 bugs
* typo
* use %04d rather than %d when printing the position

Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46666

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46675 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoar71xx: Add support for Black Swift
blogic [Mon, 17 Aug 2015 13:18:56 +0000 (13:18 +0000)]
ar71xx: Add support for Black Swift

Add support for the Black Swift board:

Took relevant parts and slightly adapted from:

Signed-off-by: Bruno Randolf <br1@einfach.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46674 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoar71xx: Enable ath10k calibration data loading for EnGenius ESR1750 and EPG500.
blogic [Mon, 17 Aug 2015 13:18:50 +0000 (13:18 +0000)]
ar71xx: Enable ath10k calibration data loading for EnGenius ESR1750 and EPG500.

Kinda-backport of r46415, though this patch uses the old-style calibration data loading.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46673 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoimage: fix handling of per-device kernel build commands
nbd [Thu, 13 Aug 2015 19:35:29 +0000 (19:35 +0000)]
image: fix handling of per-device kernel build commands

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46589

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46591 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoimage: fix device variable exports for initramfs images
nbd [Thu, 13 Aug 2015 19:35:26 +0000 (19:35 +0000)]
image: fix device variable exports for initramfs images

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46496

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46590 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agobcm53xx: add workaround for Netgear R8000 network
rmilecki [Wed, 12 Aug 2015 15:26:18 +0000 (15:26 +0000)]
bcm53xx: add workaround for Netgear R8000 network

According to the info from NVRAM we should use port 8 for the CPU (and
interface eth2). Unfortunately it doesn't work right now, so lets switch
to the port 5.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46586 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agobrcm47xx: fix reading WGT634U CFE variables
rmilecki [Wed, 12 Aug 2015 13:30:34 +0000 (13:30 +0000)]
brcm47xx: fix reading WGT634U CFE variables

We got check for nvram_len placed too early and the code never tried
reading CFE variables used on WGT634U. This is a regression introduced
in r45942 and reported in #20291.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46584

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46585 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agobase-files: buttons: make power script return 0
rmilecki [Wed, 12 Aug 2015 00:58:41 +0000 (00:58 +0000)]
base-files: buttons: make power script return 0

It was missed in the r46471.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46582

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46583 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agobuttons: make all button handler scripts return 0
rmilecki [Mon, 10 Aug 2015 23:58:15 +0000 (23:58 +0000)]
buttons: make all button handler scripts return 0

this is required by the new button timeout feature

Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46471

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46581 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoprocd: update to the latest version, add "button" hotplug handler
rmilecki [Mon, 10 Aug 2015 22:29:46 +0000 (22:29 +0000)]
procd: update to the latest version, add "button" hotplug handler

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
In 15.05-rc2 we got support for "set-interval" and "clear-interval"
which got dropped with the update of procd done in r46257. This new
"button" action provides similar functionality so it makes sense to
backport it to 15.05.

Backport of r46578

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46579 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: kernel: crypto: fix module loading of aead.ko
hauke [Sun, 9 Aug 2015 17:19:00 +0000 (17:19 +0000)]
CC: kernel: crypto: fix module loading of aead.ko
The name of the module was wrong before.

This should fix #20283.

backport of r46574.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46577 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoar71xx: use automatic firmware partition splitting for devolo dLAN devices
blogic [Mon, 3 Aug 2015 10:22:38 +0000 (10:22 +0000)]
ar71xx: use automatic firmware partition splitting for devolo dLAN devices

Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
Backport of r46414

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46549 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoar71xx: Backport support for Onion Omega
blogic [Mon, 3 Aug 2015 10:22:33 +0000 (10:22 +0000)]
ar71xx: Backport support for Onion Omega

Backport of r46458 to CC


Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: Boken Lin <bl@onion.io>
Tested-by: Jacky Huang <huangfangcheng@163.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46548 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoramips: Fix Ticket #20153 swap radio calibration data pointers on the RE6500
nbd [Sun, 2 Aug 2015 15:08:27 +0000 (15:08 +0000)]
ramips: Fix Ticket #20153 swap radio calibration data pointers on the RE6500

This patch fixes weak radio signal reported by nikola.georgiev

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Backport of r46545

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46546 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoar71xx: fix mr3220 device profile (#19990)
nbd [Sat, 1 Aug 2015 15:52:54 +0000 (15:52 +0000)]
ar71xx: fix mr3220 device profile (#19990)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46541

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46542 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agosunxi: CC: fix networking on Olimex A20 Micro
wigyori [Fri, 31 Jul 2015 19:57:10 +0000 (19:57 +0000)]
sunxi: CC: fix networking on Olimex A20 Micro

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46537 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomvebu: update dts files for mamba / WRT1900AC (backport of r46530)
kaloz [Fri, 31 Jul 2015 18:25:03 +0000 (18:25 +0000)]
mvebu: update dts files for mamba / WRT1900AC (backport of r46530)

Fix for default button states in WRT1900AC dts files.
This prevents overlay wipe when reset is pressed.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46531 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomvebu: fix gpio config on the WRT1200AC (backport of r46527)
kaloz [Fri, 31 Jul 2015 18:08:51 +0000 (18:08 +0000)]
mvebu: fix gpio config on the WRT1200AC (backport of r46527)

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46528 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomwlwifi: upgrade to latest rev with fixed firmware (backport of r46520)
kaloz [Thu, 30 Jul 2015 06:41:43 +0000 (06:41 +0000)]
mwlwifi: upgrade to latest rev with fixed firmware (backport of r46520)

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46521 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: sdk: provide explicit CONFIG_MODULES kconfig symbol
jow [Mon, 27 Jul 2015 23:49:48 +0000 (23:49 +0000)]
CC: sdk: provide explicit CONFIG_MODULES kconfig symbol
Extend the SDK Config.in file to explicitely declare a MODULES symbol with
the "option modules" flag set in order to prevent a kconfig segmentation fault
whenever a "depends m" dependency is encountered.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46514

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46515 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: dnsmasq: add some missing files to the jail
jow [Mon, 27 Jul 2015 11:49:48 +0000 (11:49 +0000)]
CC: dnsmasq: add some missing files to the jail
found with strace, not sure we got all of them though

Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Backport of r46467

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46511 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: base-files: fix /tmp/.jail permissions
jow [Mon, 27 Jul 2015 11:49:43 +0000 (11:49 +0000)]
CC: base-files: fix /tmp/.jail permissions
We need a+x rights on the path to the root of the jails
so we can use users other than root (like nobody)

This partly fixes jailed dnsmasq

Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Backport of r46466

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46510 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: procd: update to latest git HEAD
jow [Mon, 27 Jul 2015 11:49:39 +0000 (11:49 +0000)]
CC: procd: update to latest git HEAD
fixes http://patchwork.ozlabs.org/patch/497899/

Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46465

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46509 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agofirewall: fix typo in ESP rule
cyrus [Mon, 27 Jul 2015 11:48:00 +0000 (11:48 +0000)]
firewall: fix typo in ESP rule

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46508 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agofirewall: comply with REC-22, REC-24 of RFC 6092
cyrus [Mon, 27 Jul 2015 11:47:56 +0000 (11:47 +0000)]
firewall: comply with REC-22, REC-24 of RFC 6092

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46507 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoramips: swap radio calibration data pointers for DIR-860L
nbd [Sun, 26 Jul 2015 13:02:37 +0000 (13:02 +0000)]
ramips: swap radio calibration data pointers for DIR-860L

Fixes low 5 GHz tx power issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46497

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46499 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agotools: drop circular dependency between patch and ccache, build patch without ccache...
nbd [Sun, 26 Jul 2015 13:02:35 +0000 (13:02 +0000)]
tools: drop circular dependency between patch and ccache, build patch without ccache (fixes #20132)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46434

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46498 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: ar71xx: EPG5000 requires ATH79_NVRAM
hauke [Sat, 25 Jul 2015 13:54:15 +0000 (13:54 +0000)]
CC: ar71xx: EPG5000 requires ATH79_NVRAM
EPG5000 uses ath79 nvram functions, but does not select it. This breaks
build if no other board support enabling nvram support is selected.

Closes #19952.

Backport of r46190.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46494 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: kernel: update 3.18 to 3.18.19
jogo [Sat, 25 Jul 2015 10:02:47 +0000 (10:02 +0000)]
CC: kernel: update 3.18 to 3.18.19
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.19

Backport of r46439.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46487 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: brcm63xx: HG553 buttons support
jogo [Sat, 25 Jul 2015 10:02:44 +0000 (10:02 +0000)]
CC: brcm63xx: HG553 buttons support
This patch adds buttons support for Huawei EchoLife HG553.

Backport of r46388.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46486 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: ar71xx: add LED defaults for the EnGenius EPG5000
blogic [Fri, 24 Jul 2015 08:58:57 +0000 (08:58 +0000)]
CC: ar71xx: add LED defaults for the EnGenius EPG5000
NB that wlan5g is phy0tpt and wlan2g phy1tpt.

Backport of r46226.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46450 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: ar71xx: Fix WAN port location on EnGenius ESR1750 and EPG5000.
blogic [Fri, 24 Jul 2015 08:58:45 +0000 (08:58 +0000)]
CC: ar71xx: Fix WAN port location on EnGenius ESR1750 and EPG5000.
The designated blue WAN port on both devices has index 5, not 1.

Backport of r46227.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46449 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: ar71xx: add profile and build image for EnGenius EPG5000.
blogic [Fri, 24 Jul 2015 08:58:40 +0000 (08:58 +0000)]
CC: ar71xx: add profile and build image for EnGenius EPG5000.
Backport of r46049.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46448 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: ar71xx: add user-space support for EnGenius EPG5000.
blogic [Fri, 24 Jul 2015 08:58:33 +0000 (08:58 +0000)]
CC: ar71xx: add user-space support for EnGenius EPG5000.
Backport of r46048.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46447 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: ar71xx: add kernel support for EnGenius EPG5000.
blogic [Fri, 24 Jul 2015 08:58:27 +0000 (08:58 +0000)]
CC: ar71xx: add kernel support for EnGenius EPG5000.
Backport of r46047.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46446 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agov3: CC : ar71xx: Backport Support for the Bitmain Antminer S3
blogic [Fri, 24 Jul 2015 08:58:20 +0000 (08:58 +0000)]
v3: CC : ar71xx: Backport Support for the Bitmain Antminer S3

Backport of r46236 to CC : add support for the Bitmain Antminer S3

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46445 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoar71xx: add support for the devolo dLAN pro 1200+ WiFi ac
blogic [Fri, 24 Jul 2015 08:58:12 +0000 (08:58 +0000)]
ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac

Backport of r46342

Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46444 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomac80211: make ath10k firmware v2 selectable
blogic [Fri, 24 Jul 2015 08:58:07 +0000 (08:58 +0000)]
mac80211: make ath10k firmware v2 selectable

Added option for old firmware version (10.1 API v2). It seems that recent
firmware versions are constantly crashing (at least on a QCA9880-BR4A-R) and
this provides the option to select an older version instead.

Backport of r46340

Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46443 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoar71xx: add support for the devolo dLAN pro 500 Wireless+
blogic [Fri, 24 Jul 2015 08:58:03 +0000 (08:58 +0000)]
ar71xx: add support for the devolo dLAN pro 500 Wireless+

Backport of r46338

Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46442 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoat91: add Device Tree based board detection
florian [Sat, 18 Jul 2015 22:36:18 +0000 (22:36 +0000)]
at91: add Device Tree based board detection

Set up eth0 as LAN interface by default.

Backport of r46174

Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46419 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoat91: sama5d3: enable USB2 by default
florian [Sat, 18 Jul 2015 22:35:36 +0000 (22:35 +0000)]
at91: sama5d3: enable USB2 by default

Backport of r46173

Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46418 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agokernel: fix OHCI and EHCI modules for AT91
florian [Sat, 18 Jul 2015 22:34:58 +0000 (22:34 +0000)]
kernel: fix OHCI and EHCI modules for AT91

We were not copying the additional files needed to get USB to work on
the AT91 platforms, make sure we do this.

Backport of r46172

Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46417 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoat91: enable Micrel PHY driver
florian [Sat, 18 Jul 2015 22:33:08 +0000 (22:33 +0000)]
at91: enable Micrel PHY driver

The AT91 SAMA5D3XPLAINED uses a KSZ9031 and a KSZ8081 that are supported
by this PHY driver.

Backport of r46171

Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46416 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomt76: backport rx buffer allocation fix from r46409
nbd [Sat, 18 Jul 2015 16:56:28 +0000 (16:56 +0000)]
mt76: backport rx buffer allocation fix from r46409

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46412 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoramips: enable mt76 by default for mt7621
nbd [Sat, 18 Jul 2015 16:56:25 +0000 (16:56 +0000)]
ramips: enable mt76 by default for mt7621

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46410

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46411 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: toplevel.mk: fix LD_LIBRARY_PATH for host binaries
jow [Fri, 17 Jul 2015 11:37:47 +0000 (11:37 +0000)]
CC: toplevel.mk: fix LD_LIBRARY_PATH for host binaries
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46394

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46395 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoubox: update to latest git HEAD
rmilecki [Tue, 14 Jul 2015 10:32:51 +0000 (10:32 +0000)]
ubox: update to latest git HEAD

Signed-off-by: John Crispin <blogic@openwrt.org>
This adds support for filtering messages
Backport of r46356

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46365 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoodhcp6c: fix some more compatibility issues
cyrus [Mon, 13 Jul 2015 21:52:25 +0000 (21:52 +0000)]
odhcp6c: fix some more compatibility issues

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46337 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoodhcp6c: work-around more ISP DHCPv6-PD issues
cyrus [Mon, 13 Jul 2015 21:52:14 +0000 (21:52 +0000)]
odhcp6c: work-around more ISP DHCPv6-PD issues

Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46336 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: curl: fix some security vulnerabilities
hauke [Sun, 12 Jul 2015 16:03:51 +0000 (16:03 +0000)]
CC: curl: fix some security vulnerabilities
This fixes the following security vulnerabilities in curl:
* CVE-2015-3143
* CVE-2015-3144
* CVE-2015-3145
* CVE-2015-3148
* CVE-2015-3153
* CVE-2015-3236
* CVE-2015-3237

This was fixed in trunk with update to version 7.43.0 in r46169.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46312 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: kernel: fix loading bluetooth_6lowpan
hauke [Sun, 12 Jul 2015 16:03:09 +0000 (16:03 +0000)]
CC: kernel: fix loading bluetooth_6lowpan
Backprot of r46179

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46311 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: kernel: add missing config option
hauke [Sun, 12 Jul 2015 16:02:47 +0000 (16:02 +0000)]
CC: kernel: add missing config option
This should fix build of sunxi.

Backport of r46304

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46310 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: kernel: update 3.18 to 3.18.18
hauke [Sun, 12 Jul 2015 16:02:34 +0000 (16:02 +0000)]
CC: kernel: update 3.18 to 3.18.18
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.18

Backport of r46299, r46303 and r46308.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46309 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoebtables: remove partially broken musl fix
nbd [Fri, 10 Jul 2015 11:37:36 +0000 (11:37 +0000)]
ebtables: remove partially broken musl fix

See http://patchwork.ozlabs.org/patch/493573/ for more information

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46293 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agotoolchain: mark musl as broken for the chaos_calmer branch
nbd [Fri, 10 Jul 2015 11:28:44 +0000 (11:28 +0000)]
toolchain: mark musl as broken for the chaos_calmer branch

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46291 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomac80211: add brcmfmac patch fixing user space picked MACs
rmilecki [Thu, 9 Jul 2015 18:23:41 +0000 (18:23 +0000)]
mac80211: add brcmfmac patch fixing user space picked MACs

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46288

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46290 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomac80211: try to workaround some brcmfmac bug with handling interfaces
rmilecki [Thu, 9 Jul 2015 18:23:35 +0000 (18:23 +0000)]
mac80211: try to workaround some brcmfmac bug with handling interfaces

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46278

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46289 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: openssl: update to v1.0.2d (CVE-2015-1793)
jow [Thu, 9 Jul 2015 13:15:19 +0000 (13:15 +0000)]
CC: openssl: update to v1.0.2d (CVE-2015-1793)
During certificate verification, OpenSSL (starting from version 1.0.1n and
1.0.2b) will attempt to find an alternative certificate chain if the first
attempt to build such a chain fails. An error in the implementation of this
logic can mean that an attacker could cause certain checks on untrusted
certificates to be bypassed, such as the CA flag, enabling them to use a valid
leaf certificate to act as a CA and "issue" an invalid certificate.

This issue will impact any application that verifies certificates including
SSL/TLS/DTLS clients and SSL/TLS/DTLS servers using client authentication.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46285

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46286 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agox86/xen_domu: enable image generation
blogic [Thu, 9 Jul 2015 05:29:25 +0000 (05:29 +0000)]
x86/xen_domu: enable image generation

Add features ext4 targz to target x86/xen_domu in order to
generate images in defconfig.

This fixes #18074.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Backport of r46233

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46277 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agonvram: get rid of NVRAM_SPACE
rmilecki [Wed, 8 Jul 2015 06:06:07 +0000 (06:06 +0000)]
nvram: get rid of NVRAM_SPACE

Now we support NVRAM whatever its size is.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46262

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46263 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agonvram: fix displayed info about NVRAM size
rmilecki [Wed, 8 Jul 2015 05:45:09 +0000 (05:45 +0000)]
nvram: fix displayed info about NVRAM size

Use actual partition size and content offset to calculate it.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46260

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46261 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoRevert "Revert "nvram: increase NVRAM size to 64 KiB""
rmilecki [Wed, 8 Jul 2015 04:55:10 +0000 (04:55 +0000)]
Revert "Revert "nvram: increase NVRAM size to 64 KiB""

This reverts commit r45579.

With the latest change r46251 ("nvram: fix "Segmentation fault" caused
by setting memory out of buffer") nvram utility shouldn't crash anymore.

It was tested on 3 brcm47xx devices:
1) Unknown with 0x10000 NVRAM size (0x8000 offset)
2) Linksys E1000 V2.1 with 0x10000 (0x8000 offset)
3) Linksys WRT300N V1 with 0x10000 (0x8000 offset)

And 3 bcm53xx devices:
1) Buffalo WZR-600DHP2 with 0x160000 NVRAM size
2) Buffalo WZR-1750DHP with 0x10000 NVRAM size
3) Netgear R6250 V1 with 0x180000 NVRAM size
(all using 0 offset)

This is an important change as it allows reading whole NVRAM. This may
critical when reading some basic configuration (e.g. switch ports).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46253

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46259 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agonvram: fix "Segmentation fault" caused by setting memory out of buffer
rmilecki [Wed, 8 Jul 2015 04:55:04 +0000 (04:55 +0000)]
nvram: fix "Segmentation fault" caused by setting memory out of buffer

Some MTD partitions with NVRAM have content starting in the middle. In
such case offset is set and nvram_header returns pointer to the middle.
It means we have to respect offset when calculating remaining space.

By the way use real MTD partition size (nvram_part_size variable) as we
may want to bump NVRAM_SPACE in the (very near) future.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46251

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46258 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoprocd: update to the latest version, fix stdout logging
rmilecki [Wed, 8 Jul 2015 04:54:57 +0000 (04:54 +0000)]
procd: update to the latest version, fix stdout logging

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46212

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46257 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoar71xx: fix kernel Oops in at803x_link_change_notify
nbd [Tue, 7 Jul 2015 21:52:29 +0000 (21:52 +0000)]
ar71xx: fix kernel Oops in at803x_link_change_notify

r45954 ("ar71xx: fix 100/10mbps ethernet link issues on mynet range
extender") introduced a pdata based modification of the tx_clk_dly. But it
was not checked if pdata actually existed. This caused a page fault on all
devices which didn't have at803x_platform_data specified for an at803x
based device.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Backport of r46200

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46252 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoscripts/feeds: observe -p flag for preferential feeds
cyrus [Tue, 7 Jul 2015 11:30:39 +0000 (11:30 +0000)]
scripts/feeds: observe -p flag for preferential feeds

lookup_target was trampling the $feed variable, resulting in the -p flag
no longer preferentially installing from the named feed.

Make sure to use a local variable for this instead.

Signed-off-by: Karl Palsson <karlp@remake.is>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46213 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: kernel: kmod-scsi-core: fix load on install
jogo [Sat, 4 Jul 2015 12:53:57 +0000 (12:53 +0000)]
CC: kernel: kmod-scsi-core: fix load on install
sd_mod depends on scsi_mod, but due to it being an AutoLoad and not
AutoProbe module, it was not loading when installing the package,
causing unknown symbol errors for sd_mod and anything depending on it.

Closes #14927, #18293, #19351.

Backport of r46176.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46177 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: uclibc++: make g++-uc* wrappers relocatable
jow [Fri, 3 Jul 2015 13:38:12 +0000 (13:38 +0000)]
CC: uclibc++: make g++-uc* wrappers relocatable
The g++-uc wrapper hardcodes $(STAGING_DIR) and $(TOOLCHAIN_DIR) paths which
will not work outside of the original build environment.

Replace the hardcoded staging_dir occurences with paths relative to the
$STAGING_DIR environment variable to make the g++-uc* wrappers usable in an
SDK environment.

Fixes the libdb47 build failure reported at

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46162

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46163 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoath9k: make DMA stop related messages debug-only (#11862, #9654)
nbd [Thu, 2 Jul 2015 11:45:39 +0000 (11:45 +0000)]
ath9k: make DMA stop related messages debug-only (#11862, #9654)

A long time ago, ath9k had issues during reset where the DMA engine
would stay active and could potentially corrupt memory.
To debug those issues, the driver would print warnings whenever they

Nowadays, these issues are gone and the primary cause of these messages
is if the MAC is stuck during reset or busy processing a long
transmission. This is fairly harmless, yet these messages continue to
worry users.

To reduce the number of bogus bug reports, turn these messages into
debug messages and count their occurence in the "reset" debugfs file.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46158

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46159 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agomdns: fix ubus wait_for command
nbd [Thu, 2 Jul 2015 11:26:28 +0000 (11:26 +0000)]
mdns: fix ubus wait_for command

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46156

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46157 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: kernel: update 3.18 to 3.18.17
jogo [Wed, 1 Jul 2015 00:32:10 +0000 (00:32 +0000)]
CC: kernel: update 3.18 to 3.18.17
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17

Backport of r46150.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46155 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: brcm63xx: swap a4001n power leds again
jogo [Wed, 1 Jul 2015 00:32:03 +0000 (00:32 +0000)]
CC: brcm63xx: swap a4001n power leds again
This partially reverts r44577 ("brcm63xx: fix DTS LEDs and buttons").

Fixes #19858.

Backport of r46149.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46154 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoCC: brcm63xx: unbreak board_probe_switch again
jogo [Wed, 1 Jul 2015 00:32:01 +0000 (00:32 +0000)]
CC: brcm63xx: unbreak board_probe_switch again
Also move it to an earlier place so new boards added are less likely
to confuse quilt.

Fixes #19965.

Backport of r46148.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46153 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoRevert "ar71xx: add profile and build image for EnGenius EPG5000."
blogic [Mon, 29 Jun 2015 08:24:13 +0000 (08:24 +0000)]
Revert "ar71xx: add profile and build image for EnGenius EPG5000."

This reverts commit ac3184da4138c54b8a2c1be637be7cf78fc40fce.

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46144 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoRevert "ar71xx: add user-space support for EnGenius EPG5000."
blogic [Mon, 29 Jun 2015 08:24:07 +0000 (08:24 +0000)]
Revert "ar71xx: add user-space support for EnGenius EPG5000."

This reverts commit e3326c4473bc6b7b5fd899ac955af974ebc64b92.

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46143 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agoRevert "ar71xx: add kernel support for EnGenius EPG5000."
blogic [Mon, 29 Jun 2015 08:24:03 +0000 (08:24 +0000)]
Revert "ar71xx: add kernel support for EnGenius EPG5000."

This reverts commit 27386b74adfe868f693176f55861984432afd2ce.

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46142 3c298f89-4303-0410-b956-a3cf2f4a3e73

6 years agob53: Allow using all 8 ports on BCM53011
rmilecki [Mon, 22 Jun 2015 07:59:09 +0000 (07:59 +0000)]
b53: Allow using all 8 ports on BCM53011

On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000
(BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port
5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and
usually 3 of them are connected to the SoC.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46104

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46107 3c298f89-4303-0410-b956-a3cf2f4a3e73