/dts-v1/; /include/ "rt2880.dtsi" / { #address-cells = <1>; #size-cells = <1>; compatible = "RT-N15", "ralink,rt2880-soc"; model = "Asus RT-N15"; palmbus@300000 { gpio0: gpio@600 { status = "okay"; }; }; pinctrl { state_default: pinctrl0 { gpio { ralink,group = "i2c", "uartlite", "mdio"; ralink,function = "gpio"; }; }; }; cfi@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; bank-width = <2>; device-width = <2>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "uboot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "uboot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "firmware"; reg = <0x50000 0x3b0000>; }; }; ethernet@400000 { status = "okay"; mtd-mac-address = <&factory 0x4>; port@0 { ralink,fixed-link = <1000 1 1 1>; }; mdio-bus { status = "okay"; phy0: ethernet-phy@0 { phy-mode = "mii"; reg = <0>; }; }; }; rtl8366s { compatible = "realtek,rtl8366s"; gpio-sda = <&gpio0 1 0>; gpio-sck = <&gpio0 2 0>; }; wmac@480000 { ralink,mtd-eeprom = <&factory 0>; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <100>; wps { label = "wps"; gpios = <&gpio0 0 0>; linux,code = <0x211>; }; reset { label = "reset"; gpios = <&gpio0 12 0>; linux,code = <0x198>; }; }; gpio-leds { compatible = "gpio-leds"; power { label = "rt-n15:blue:power"; gpios = <&gpio0 11 1>; }; }; };