target/linux/ramips/dts/WZR-AGL300NH.dts

   1 /dts-v1/;
   2
   3 /include/ "rt2880.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "WZR-AGL300NH", "ralink,rt2880-soc";
   9         model = "Buffalo WZR-AGL300NH";
  10
  11         palmbus@300000 {
  12                 gpio0: gpio@600 {
  13                         status = "okay";
  14                 };
  15         };
  16
  17         pinctrl {
  18                 state_default: pinctrl0 {
  19                         gpio {
  20                                 ralink,group = "i2c", "uartlite", "mdio";
  21                                 ralink,function = "gpio";
  22                         };
  23                 };
  24         };
  25
  26         cfi@1f000000 {
  27                 compatible = "cfi-flash";
  28                 reg = <0x1f000000 0x800000>;
  29
  30                 bank-width = <2>;
  31                 device-width = <2>;
  32                 #address-cells = <1>;
  33                 #size-cells = <1>;
  34
  35                 partition@0 {
  36                         label = "uboot";
  37                         reg = <0x0 0x30000>;
  38                         read-only;
  39                 };
  40                 partition@30000 {
  41                         label = "uboot-env";
  42                         reg = <0x30000 0x10000>;
  43                         read-only;
  44                 };
  45                 factory: partition@40000 {
  46                         label = "factory";
  47                         reg = <0x40000 0x10000>;
  48                         read-only;
  49                 };
  50                 partition@50000 {
  51                         label = "firmware";
  52                         reg = <0x50000 0x3b0000>;
  53                 };
  54         };
  55
  56         ethernet@400000 {
  57                 status = "okay";
  58                 mtd-mac-address = <&factory 0x4>;
  59
  60                 port@0 {
  61                         ralink,fixed-link = <1000 1 1 1>;
  62                 };
  63
  64                 mdio-bus {
  65                         status = "okay";
  66                         phy0: ethernet-phy@0 {
  67                                 phy-mode = "mii";
  68                                 reg = <0>;
  69                         };
  70                 };
  71         };
  72
  73         rtl8366s {
  74                 compatible = "realtek,rtl8366s";
  75                 gpio-sda = <&gpio0 1 0>;
  76                 gpio-sck = <&gpio0 2 0>;
  77         };
  78
  79         wmac@480000 {
  80                 ralink,mtd-eeprom = <&factory 0>;
  81         };
  82
  83         gpio-keys-polled {
  84                 compatible = "gpio-keys-polled";
  85                 #address-cells = <1>;
  86                 #size-cells = <0>;
  87                 poll-interval = <100>;
  88                 wps {
  89                         label = "wps";
  90                         gpios = <&gpio0 0 1>;
  91                         linux,code = <0x211>;
  92                 };
  93                 router {
  94                         label = "router_switch";
  95                         gpios = <&gpio0 7 0>;
  96                         linux,code = <0x100>;
  97                 };
  98                 reset {
  99                         label = "reset";
 100                         gpios = <&gpio0 9 1>;
 101                         linux,code = <0x198>;
 102                 };
 103         };
 104
 105         gpio-leds {
 106                 compatible = "gpio-leds";
 107
 108                 router {
 109                         label = "buffalo:green:router";
 110                         gpios = <&gpio0 8 1>;
 111                 };
 112                 diag {
 113                         label = "buffalo:red:diag";
 114                         gpios = <&gpio0 12 1>;
 115                 };
 116                 security_g {
 117                         label = "buffalo:orange:security_g";
 118                         gpios = <&gpio0 11 1>;
 119                 };
 120                 security_n {
 121                         label = "buffalo:orange:security_n";
 122                         gpios = <&gpio0 13 1>;
 123                 };
 124         };
 125
 126
 127         pcibus0: pci@00440000 {
 128                 compatible = "ralink,rt288x-pci";
 129                 reg = <0x00440000 0x20000>;
 130                 #address-cells = <1>;
 131                 #size-cells = <1>;
 132
 133                 status = "ok";
 134         };
 135 };