target/linux/ramips/dts/WLI-TX4-AG300N.dts

   1 /dts-v1/;
   2
   3 /include/ "rt2880.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
   9         model = "Buffalo WLI-TX4-AG300N";
  10
  11         palmbus@300000 {
  12                 gpio0: gpio@600 {
  13                         status = "okay";
  14                 };
  15         };
  16
  17         cfi@1f000000 {
  18                 compatible = "cfi-flash";
  19                 reg = <0x1f000000 0x800000>;
  20
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25
  26                 partition@0 {
  27                         label = "uboot";
  28                         reg = <0x0 0x30000>;
  29                         read-only;
  30                 };
  31                 partition@30000 {
  32                         label = "uboot-env";
  33                         reg = <0x30000 0x10000>;
  34                         read-only;
  35                 };
  36                 factory: partition@40000 {
  37                         label = "factory";
  38                         reg = <0x40000 0x10000>;
  39                         read-only;
  40                 };
  41                 partition@50000 {
  42                         label = "linux";
  43                         reg = <0x50000 0x3b0000>;
  44                 };
  45         };
  46
  47         ethernet@400000 {
  48                 status = "okay";
  49                 mtd-mac-address = <&factory 0x4>;
  50
  51                 port@0 {
  52                         ralink,fixed-link = <1000 1 1 1>;
  53                 };
  54         };
  55
  56         wmac@480000 {
  57                 ralink,mtd-eeprom = <&factory 0>;
  58         };
  59
  60         gpio-keys-polled {
  61                 compatible = "gpio-keys-polled";
  62                 #address-cells = <1>;
  63                 #size-cells = <0>;
  64                 poll-interval = <100>;
  65                 wps {
  66                         label = "wps";
  67                         gpios = <&gpio0 0 1>;
  68                         linux,code = <0x211>;
  69                 };
  70                 bandwidth {
  71                         label = "bandwidth";
  72                         gpios = <&gpio0 8 0>;
  73                         linux,code = <0x198>;
  74                 };
  75                 reset {
  76                         label = "reset";
  77                         gpios = <&gpio0 9 1>;
  78                         linux,code = <0x198>;
  79                 };
  80         };
  81
  82         gpio-leds {
  83                 compatible = "gpio-leds";
  84
  85                 diag {
  86                         label = "buffalo:red:diag";
  87                         gpios = <&gpio0 10 1>;
  88                 };
  89                 power {
  90                         label = "buffalo:blue:power";
  91                         gpios = <&gpio0 12 1>;
  92                 };
  93                 security {
  94                         label = "buffalo:blue:security";
  95                         gpios = <&gpio0 13 1>;
  96                 };
  97         };
  98 };