target/linux/ramips/dts/WL341V3.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WL341V3", "ralink,rt3052-soc";
   7         model = "Sitecom WL-341 v3";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12
  13                 bank-width = <2>;
  14                 device-width = <2>;
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17
  18                 partition@0 {
  19                         label = "u-boot";
  20                         reg = <0x0 0x20000>;
  21                         read-only;
  22                 };
  23
  24                 boardnvram: partition@20000 {
  25                         label = "board-nvram";
  26                         reg = <0x20000 0x10000>;
  27                         read-only;
  28                 };
  29
  30                 partition@30000 {
  31                         label = "u-boot-env";
  32                         reg = <0x30000 0x10000>;
  33                         read-only;
  34                 };
  35
  36                 partition@40000 {
  37                         label = "firmware";
  38                         reg = <0x40000 0x3b0000>;
  39                 };
  40         };
  41
  42         pinctrl {
  43                 state_default: pinctrl0 {
  44                         gpio {
  45                                 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  46                                 ralink,function = "gpio";
  47                         };
  48                 };
  49         };
  50
  51         ethernet@10100000 {
  52                 mtd-mac-address = <&boardnvram 0xffa0>;
  53         };
  54
  55         esw@10110000 {
  56                 ralink,portmap = <0x3e>;
  57         };
  58
  59         wmac@10180000 {
  60                 ralink,mtd-eeprom = <&boardnvram 0xfd70>;
  61         };
  62
  63         gpio-leds {
  64                 compatible = "gpio-leds";
  65                 first {
  66                         label = "wl341v3:amber:first";
  67                         gpios = <&gpio0 9 1>;
  68                 };
  69                 first2 {
  70                         label = "wl341v3:blue:first";
  71                         gpios = <&gpio0 13 1>;
  72                 };
  73                 third {
  74                         label = "wl341v3:amber:third";
  75                         gpios = <&gpio0 11 1>;
  76                 };
  77                 third2 {
  78                         label = "wl341v3:blue:third";
  79                         gpios = <&gpio0 14 1>;
  80                 };
  81                 fourth {
  82                         label = "wl341v3:blue:fourth";
  83                         gpios = <&gpio0 10 1>;
  84                 };
  85                 fifth {
  86                         label = "wl341v3:amber:fifth";
  87                         gpios = <&gpio0 12 1>;
  88                 };
  89                 fifth2 {
  90                         label = "wl341v3:blue:fifth";
  91                         gpios = <&gpio0 8 1>;
  92                 };
  93         };
  94
  95         gpio-keys-polled {
  96                 compatible = "gpio-keys-polled";
  97                 #address-cells = <1>;
  98                 #size-cells = <0>;
  99                 poll-interval = <20>;
 100                 reset {
 101                         label = "reset";
 102                         gpios = <&gpio0 7 1>;
 103                         linux,code = <0x198>;
 104                 };
 105                 wps {
 106                         label = "wps";
 107                         gpios = <&gpio0 5 1>;
 108                         linux,code = <0x211>;
 109                 };
 110         };
 111
 112         otg@101c0000 {
 113                 status = "okay";
 114         };
 115 };