Merge pull request #580 from wigyori/cc-libpcap
[15.05/openwrt.git] / target / linux / ramips / dts / PWH2004.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6         compatible = "PWH2004", "ralink,rt3052-soc";
7         model = "Prolink PWH2004";
8
9         pinctrl {
10                 state_default: pinctrl0 {
11                         gpio {
12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
13                                 ralink,function = "gpio";
14                         };
15                 };
16         };
17
18         cfi@1f000000 {
19                 compatible = "cfi-flash";
20                 reg = <0x1f000000 0x800000>;
21
22                 bank-width = <2>;
23                 device-width = <2>;
24                 #address-cells = <1>;
25                 #size-cells = <1>;
26
27                 partition@0 {
28                         label = "u-boot";
29                         reg = <0x0 0x30000>;
30                         read-only;
31                 };
32
33                 partition@30000 {
34                         label = "u-boot-env";
35                         reg = <0x30000 0x10000>;
36                         read-only;
37                 };
38
39                 factory: partition@40000 {
40                         label = "factory";
41                         reg = <0x40000 0x10000>;
42                         read-only;
43                 };
44
45                 partition@50000 {
46                         label = "firmware";
47                         reg = <0x50000 0x7b0000>;
48                 };
49         };
50
51         gpio-leds {
52                 compatible = "gpio-leds";
53                 wifi {
54                         label = "pwh2004:red:wifi";
55                         gpios = <&gpio0 14 1>;
56                 };
57                 power {
58                         label = "pwh2004:green:power";
59                         gpios = <&gpio0 9 1>;
60                 };
61         };
62
63         gpio-keys-polled {
64                 compatible = "gpio-keys-polled";
65                 #address-cells = <1>;
66                 #size-cells = <0>;
67                 poll-interval = <20>;
68                 wps {
69                         label = "wps";
70                         gpios = <&gpio0 12 1>;
71                         linux,code = <0x198>;
72                 };
73         };
74
75         esw@10110000 {
76                 ralink,portmap = <0x2f>;
77         };
78
79         wmac@10180000 {
80                 ralink,mtd-eeprom = <&factory 0>;
81         };
82 };