package/network/services/hostapd/files/netifd.sh

   1 wpa_supplicant_add_rate() {
   2         local var="$1"
   3         local val="$(($2 / 1000))"
   4         local sub="$((($2 / 100) % 10))"
   5         append $var "$val" ","
   6         [ $sub -gt 0 ] && append $var "."
   7 }
   8
   9 hostapd_add_rate() {
  10         local var="$1"
  11         local val="$(($2 / 100))"
  12         append $var "$val" " "
  13 }
  14
  15 hostapd_append_wep_key() {
  16         local var="$1"
  17
  18         wep_keyidx=0
  19         set_default key 1
  20         case "$key" in
  21                 [1234])
  22                         for idx in 1 2 3 4; do
  23                                 local zidx
  24                                 zidx=$(($idx - 1))
  25                                 json_get_var ckey "key${idx}"
  26                                 [ -n "$ckey" ] && \
  27                                         append $var "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N$T"
  28                         done
  29                         wep_keyidx=$((key - 1))
  30                 ;;
  31                 *)
  32                         append $var "wep_key0=$(prepare_key_wep "$key")" "$N$T"
  33                 ;;
  34         esac
  35 }
  36
  37 hostapd_add_log_config() {
  38         config_add_boolean \
  39                 log_80211 \
  40                 log_8021x \
  41                 log_radius \
  42                 log_wpa \
  43                 log_driver \
  44                 log_iapp \
  45                 log_mlme
  46
  47         config_add_int log_level
  48 }
  49
  50 hostapd_common_add_device_config() {
  51         config_add_array basic_rate
  52         config_add_array supported_rates
  53
  54         config_add_string country
  55         config_add_boolean country_ie doth
  56         config_add_string require_mode
  57
  58         hostapd_add_log_config
  59 }
  60
  61 hostapd_prepare_device_config() {
  62         local config="$1"
  63         local driver="$2"
  64
  65         local base="${config%%.conf}"
  66         local base_cfg=
  67
  68         json_get_vars country country_ie beacon_int doth require_mode
  69
  70         hostapd_set_log_options base_cfg
  71
  72         set_default country_ie 1
  73         set_default doth 1
  74
  75         [ -n "$country" ] && {
  76                 append base_cfg "country_code=$country" "$N"
  77
  78                 [ "$country_ie" -gt 0 ] && append base_cfg "ieee80211d=1" "$N"
  79                 [ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N"
  80         }
  81         [ -n "$hwmode" ] && append base_cfg "hw_mode=$hwmode" "$N"
  82
  83         local brlist= br
  84         json_get_values basic_rate_list basic_rate
  85         for br in $basic_rate_list; do
  86                 hostapd_add_rate brlist "$br"
  87         done
  88         case "$require_mode" in
  89                 g) brlist="60 120 240" ;;
  90                 n) append base_cfg "require_ht=1" "$N";;
  91                 ac) append base_cfg "require_vht=1" "$N";;
  92         esac
  93
  94         local rlist= r
  95         json_get_values rate_list supported_rates
  96         for r in $rate_list; do
  97                 hostapd_add_rate rlist "$r"
  98         done
  99
 100         [ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
 101         [ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
 102         [ -n "$beacon_int" ] && append base_cfg "beacon_int=$beacon_int" "$N"
 103
 104         cat > "$config" <<EOF
 105 driver=$driver
 106 $base_cfg
 107 EOF
 108 }
 109
 110 hostapd_common_add_bss_config() {
 111         config_add_string 'bssid:macaddr' 'ssid:string'
 112         config_add_boolean wds wmm uapsd hidden
 113
 114         config_add_int maxassoc max_inactivity
 115         config_add_boolean disassoc_low_ack isolate short_preamble
 116
 117         config_add_int \
 118                 wep_rekey eap_reauth_period \
 119                 wpa_group_rekey wpa_pair_rekey wpa_master_rekey
 120
 121         config_add_boolean rsn_preauth auth_cache
 122         config_add_int ieee80211w
 123
 124         config_add_string 'auth_server:host' 'server:host'
 125         config_add_string auth_secret
 126         config_add_int 'auth_port:port' 'port:port'
 127
 128         config_add_string acct_server
 129         config_add_string acct_secret
 130         config_add_int acct_port
 131
 132         config_add_string dae_client
 133         config_add_string dae_secret
 134         config_add_int dae_port
 135
 136         config_add_string nasid
 137         config_add_string ownip
 138         config_add_string iapp_interface
 139         config_add_string eap_type ca_cert client_cert identity auth priv_key priv_key_pwd
 140
 141         config_add_int dynamic_vlan vlan_naming
 142         config_add_string vlan_tagged_interface vlan_bridge
 143
 144         config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey'
 145
 146         config_add_string wpa_psk_file
 147
 148         config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
 149         config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
 150
 151         config_add_boolean ieee80211r pmk_r1_push
 152         config_add_int r0_key_lifetime reassociation_deadline
 153         config_add_string mobility_domain r1_key_holder
 154         config_add_array r0kh r1kh
 155
 156         config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
 157
 158         config_add_string macfilter 'macfile:file'
 159         config_add_array 'maclist:list(macaddr)'
 160
 161         config_add_array bssid_blacklist
 162         config_add_array bssid_whitelist
 163
 164         config_add_int mcast_rate
 165         config_add_array basic_rate
 166         config_add_array supported_rates
 167 }
 168
 169 hostapd_set_bss_options() {
 170         local var="$1"
 171         local phy="$2"
 172         local vif="$3"
 173
 174         wireless_vif_parse_encryption
 175
 176         local bss_conf
 177         local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
 178
 179         json_get_vars \
 180                 wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey \
 181                 maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
 182                 wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 \
 183                 wps_device_type wps_device_name wps_manufacturer wps_pin \
 184                 macfilter ssid wmm uapsd hidden short_preamble rsn_preauth \
 185                 iapp_interface
 186
 187         set_default isolate 0
 188         set_default maxassoc 0
 189         set_default max_inactivity 0
 190         set_default short_preamble 1
 191         set_default disassoc_low_ack 1
 192         set_default hidden 0
 193         set_default wmm 1
 194         set_default uapsd 1
 195
 196         append bss_conf "ctrl_interface=/var/run/hostapd"
 197         if [ "$isolate" -gt 0 ]; then
 198                 append bss_conf "ap_isolate=$isolate" "$N"
 199         fi
 200         if [ "$maxassoc" -gt 0 ]; then
 201                 append bss_conf "max_num_sta=$maxassoc" "$N"
 202         fi
 203         if [ "$max_inactivity" -gt 0 ]; then
 204                 append bss_conf "ap_max_inactivity=$max_inactivity" "$N"
 205         fi
 206
 207         append bss_conf "disassoc_low_ack=$disassoc_low_ack" "$N"
 208         append bss_conf "preamble=$short_preamble" "$N"
 209         append bss_conf "wmm_enabled=$wmm" "$N"
 210         append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
 211         append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
 212
 213         [ "$wpa" -gt 0 ] && {
 214                 [ -n "$wpa_group_rekey"  ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N"
 215                 [ -n "$wpa_pair_rekey"   ] && append bss_conf "wpa_ptk_rekey=$wpa_pair_rekey"    "$N"
 216                 [ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey"  "$N"
 217         }
 218
 219         case "$auth_type" in
 220                 none)
 221                         wps_possible=1
 222                         # Here we make the assumption that if we're in open mode
 223                         # with WPS enabled, we got to be in unconfigured state.
 224                         wps_not_configured=1
 225                 ;;
 226                 psk)
 227                         json_get_vars key wpa_psk_file
 228                         if [ ${#key} -lt 8 ]; then
 229                                 wireless_setup_vif_failed INVALID_WPA_PSK
 230                                 return 1
 231                         elif [ ${#key} -eq 64 ]; then
 232                                 append bss_conf "wpa_psk=$key" "$N"
 233                         else
 234                                 append bss_conf "wpa_passphrase=$key" "$N"
 235                         fi
 236                         [ -n "$wpa_psk_file" ] && {
 237                                 [ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
 238                                 append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
 239                         }
 240                         wps_possible=1
 241                         append wpa_key_mgmt "WPA-PSK"
 242                 ;;
 243                 eap)
 244                         json_get_vars \
 245                                 auth_server auth_secret auth_port \
 246                                 acct_server acct_secret acct_port \
 247                                 dae_client dae_secret dae_port \
 248                                 ownip \
 249                                 eap_reauth_period dynamic_vlan \
 250                                 vlan_naming vlan_tagged_interface \
 251                                 vlan_bridge
 252
 253                         # legacy compatibility
 254                         [ -n "$auth_server" ] || json_get_var auth_server server
 255                         [ -n "$auth_port" ] || json_get_var auth_port port
 256                         [ -n "$auth_secret" ] || json_get_var auth_secret key
 257
 258                         set_default auth_port 1812
 259                         set_default acct_port 1813
 260                         set_default dae_port 3799
 261
 262                         set_default vlan_naming 1
 263
 264                         append bss_conf "auth_server_addr=$auth_server" "$N"
 265                         append bss_conf "auth_server_port=$auth_port" "$N"
 266                         append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
 267
 268                         [ -n "$acct_server" ] && {
 269                                 append bss_conf "acct_server_addr=$acct_server" "$N"
 270                                 append bss_conf "acct_server_port=$acct_port" "$N"
 271                                 [ -n "$acct_secret" ] && \
 272                                         append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
 273                         }
 274
 275                         [ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
 276
 277                         [ -n "$dae_client" -a -n "$dae_secret" ] && {
 278                                 append bss_conf "radius_das_port=$dae_port" "$N"
 279                                 append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
 280                         }
 281
 282                         [ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
 283                         append bss_conf "eapol_key_index_workaround=1" "$N"
 284                         append bss_conf "ieee8021x=1" "$N"
 285                         append wpa_key_mgmt "WPA-EAP"
 286
 287                         [ -n "$dynamic_vlan" ] && {
 288                                 append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
 289                                 append bss_conf "vlan_naming=$vlan_naming" "$N"
 290                                 [ -n "$vlan_bridge" ] && \
 291                                         append bss_conf "vlan_bridge=$vlan_bridge" "$N"
 292                                 [ -n "$vlan_tagged_interface" ] && \
 293                                         append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
 294                         }
 295                 ;;
 296                 wep)
 297                         local wep_keyidx=0
 298                         json_get_vars key
 299                         hostapd_append_wep_key bss_conf
 300                         append bss_conf "wep_default_key=$wep_keyidx" "$N"
 301                         [ -n "$wep_rekey" ] && append bss_conf "wep_rekey_period=$wep_rekey" "$N"
 302                 ;;
 303         esac
 304
 305         local auth_algs=$((($auth_mode_shared << 1) | $auth_mode_open))
 306         append bss_conf "auth_algs=${auth_algs:-1}" "$N"
 307         append bss_conf "wpa=$wpa" "$N"
 308         [ -n "$wpa_pairwise" ] && append bss_conf "wpa_pairwise=$wpa_pairwise" "$N"
 309
 310         set_default wps_pushbutton 0
 311         set_default wps_label 0
 312         set_default wps_pbc_in_m1 0
 313
 314         config_methods=
 315         [ "$wps_pushbutton" -gt 0 ] && append config_methods push_button
 316         [ "$wps_label" -gt 0 ] && append config_methods label
 317
 318         [ -n "$wps_possible" -a -n "$config_methods" ] && {
 319                 set_default ext_registrar 0
 320                 set_default wps_device_type "6-0050F204-1"
 321                 set_default wps_device_name "OpenWrt AP"
 322                 set_default wps_manufacturer "openwrt.org"
 323
 324                 wps_state=2
 325                 [ -n "$wps_configured" ] && wps_state=1
 326
 327                 [ "$ext_registrar" -gt 0 -a -n "$network_bridge" ] && append bss_conf "upnp_iface=$network_bridge" "$N"
 328
 329                 append bss_conf "eap_server=1" "$N"
 330                 [ -n "$wps_pin" ] && append bss_conf "ap_pin=$wps_pin" "$N"
 331                 append bss_conf "wps_state=$wps_state" "$N"
 332                 append bss_conf "ap_setup_locked=0" "$N"
 333                 append bss_conf "device_type=$wps_device_type" "$N"
 334                 append bss_conf "device_name=$wps_device_name" "$N"
 335                 append bss_conf "manufacturer=$wps_manufacturer" "$N"
 336                 append bss_conf "config_methods=$config_methods" "$N"
 337                 [ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N"
 338         }
 339
 340         append bss_conf "ssid=$ssid" "$N"
 341         [ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge" "$N"
 342         [ -n "$iapp_interface" ] && {
 343                 iapp_interface="$(uci_get_state network "$iapp_interface" ifname "$iapp_interface")"
 344                 [ -n "$iapp_interface" ] && append bss_conf "iapp_interface=$iapp_interface" "$N"
 345         }
 346
 347         if [ "$wpa" -ge "1" ]; then
 348                 json_get_vars nasid ieee80211r
 349                 set_default ieee80211r 0
 350                 [ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
 351
 352                 if [ "$ieee80211r" -gt "0" ]; then
 353                         json_get_vars mobility_domain r0_key_lifetime r1_key_holder \
 354                         reassociation_deadline pmk_r1_push
 355                         json_get_values r0kh r0kh
 356                         json_get_values r1kh r1kh
 357
 358                         set_default mobility_domain "4f57"
 359                         set_default r0_key_lifetime 10000
 360                         set_default r1_key_holder "00004f577274"
 361                         set_default reassociation_deadline 1000
 362                         set_default pmk_r1_push 0
 363
 364                         append bss_conf "mobility_domain=$mobility_domain" "$N"
 365                         append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
 366                         append bss_conf "r1_key_holder=$r1_key_holder" "$N"
 367                         append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
 368                         append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
 369
 370                         for kh in $r0kh; do
 371                                 append bss_conf "r0kh=${kh//,/ }" "$N"
 372                         done
 373                         for kh in $r1kh; do
 374                                 append bss_conf "r1kh=${kh//,/ }" "$N"
 375                         done
 376
 377                         [ "$wpa_key_mgmt" != "${wpa_key_mgmt/EAP/}" ] && append wpa_key_mgmt "FT-EAP"
 378                         [ "$wpa_key_mgmt" != "${wpa_key_mgmt/PSK/}" ] && append wpa_key_mgmt "FT-PSK"
 379                 fi
 380
 381                 [ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
 382         fi
 383
 384         if [ "$wpa" -ge "2" ]; then
 385                 if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
 386                         set_default auth_cache 1
 387                         append bss_conf "rsn_preauth=1" "$N"
 388                         append bss_conf "rsn_preauth_interfaces=$network_bridge" "$N"
 389                 else
 390                         set_default auth_cache 0
 391                 fi
 392
 393                 append bss_conf "okc=$auth_cache" "$N"
 394                 [ "$auth_cache" = 0 ] && append bss_conf "disable_pmksa_caching=1" "$N"
 395
 396                 # RSN -> allow management frame protection
 397                 json_get_var ieee80211w ieee80211w
 398                 case "$ieee80211w" in
 399                         [012])
 400                                 json_get_vars ieee80211w_max_timeout ieee80211w_retry_timeout
 401                                 append bss_conf "ieee80211w=$ieee80211w" "$N"
 402                                 [ "$ieee80211w" -gt "0" ] && {
 403                                         [ -n "$ieee80211w_max_timeout" ] && \
 404                                                 append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
 405                                         [ -n "$ieee80211w_retry_timeout" ] && \
 406                                                 append bss_conf "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
 407                                 }
 408                         ;;
 409                 esac
 410         fi
 411
 412         _macfile="/var/run/hostapd-$ifname.maclist"
 413         case "$macfilter" in
 414                 allow)
 415                         append bss_conf "macaddr_acl=1" "$N"
 416                         append bss_conf "accept_mac_file=$_macfile" "$N"
 417                 ;;
 418                 deny)
 419                         append bss_conf "macaddr_acl=0" "$N"
 420                         append bss_conf "deny_mac_file=$_macfile" "$N"
 421                 ;;
 422                 *)
 423                         _macfile=""
 424                 ;;
 425         esac
 426
 427         [ -n "$_macfile" ] && {
 428                 json_get_vars macfile
 429                 json_get_values maclist maclist
 430
 431                 rm -f "$_macfile"
 432                 (
 433                         for mac in $maclist; do
 434                                 echo "$mac"
 435                         done
 436                         [ -n "$macfile" -a -f "$macfile" ] && cat "$macfile"
 437                 ) > "$_macfile"
 438         }
 439
 440         append "$var" "$bss_conf" "$N"
 441         return 0
 442 }
 443
 444 hostapd_set_log_options() {
 445         local var="$1"
 446
 447         local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
 448         json_get_vars log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
 449
 450         set_default log_level 2
 451         set_default log_80211  1
 452         set_default log_8021x  1
 453         set_default log_radius 1
 454         set_default log_wpa    1
 455         set_default log_driver 1
 456         set_default log_iapp   1
 457         set_default log_mlme   1
 458
 459         local log_mask=$(( \
 460                 ($log_80211  << 0) | \
 461                 ($log_8021x  << 1) | \
 462                 ($log_radius << 2) | \
 463                 ($log_wpa    << 3) | \
 464                 ($log_driver << 4) | \
 465                 ($log_iapp   << 5) | \
 466                 ($log_mlme   << 6)   \
 467         ))
 468
 469         append "$var" "logger_syslog=$log_mask" "$N"
 470         append "$var" "logger_syslog_level=$log_level" "$N"
 471         append "$var" "logger_stdout=$log_mask" "$N"
 472         append "$var" "logger_stdout_level=$log_level" "$N"
 473
 474         return 0
 475 }
 476
 477 _wpa_supplicant_common() {
 478         local ifname="$1"
 479
 480         _rpath="/var/run/wpa_supplicant"
 481         _config="${_rpath}-$ifname.conf"
 482 }
 483
 484 wpa_supplicant_teardown_interface() {
 485         _wpa_supplicant_common "$1"
 486         rm -rf "$_rpath/$1" "$_config"
 487 }
 488
 489 wpa_supplicant_prepare_interface() {
 490         local ifname="$1"
 491         _w_driver="$2"
 492
 493         _wpa_supplicant_common "$1"
 494
 495         json_get_vars mode wds
 496
 497         [ -n "$network_bridge" ] && {
 498                 fail=
 499                 case "$mode" in
 500                         adhoc)
 501                                 fail=1
 502                         ;;
 503                         sta)
 504                                 [ "$wds" = 1 ] || fail=1
 505                         ;;
 506                 esac
 507
 508                 [ -n "$fail" ] && {
 509                         wireless_setup_vif_failed BRIDGE_NOT_ALLOWED
 510                         return 1
 511                 }
 512         }
 513
 514         local ap_scan=
 515
 516         _w_mode="$mode"
 517         _w_modestr=
 518
 519         [[ "$mode" = adhoc ]] && {
 520                 ap_scan="ap_scan=2"
 521
 522                 _w_modestr="mode=1"
 523         }
 524
 525         wpa_supplicant_teardown_interface "$ifname"
 526         cat > "$_config" <<EOF
 527 $ap_scan
 528 EOF
 529         return 0
 530 }
 531
 532 wpa_supplicant_add_network() {
 533         local ifname="$1"
 534
 535         _wpa_supplicant_common "$1"
 536         wireless_vif_parse_encryption
 537
 538         json_get_vars \
 539                 ssid bssid key \
 540                 basic_rate mcast_rate \
 541                 ieee80211w
 542
 543         local key_mgmt='NONE'
 544         local enc_str=
 545         local network_data=
 546         local T="       "
 547
 548         local wpa_key_mgmt="WPA-PSK"
 549         local scan_ssid="scan_ssid=1"
 550         local freq
 551
 552         [[ "$_w_mode" = "adhoc" ]] && {
 553                 append network_data "mode=1" "$N$T"
 554                 [ -n "$channel" ] && {
 555                         freq="$(get_freq "$phy" "$channel")"
 556                         append network_data "fixed_freq=1" "$N$T"
 557                         append network_data "frequency=$freq" "$N$T"
 558                 }
 559
 560                 scan_ssid="scan_ssid=0"
 561
 562                 [ "$_w_driver" = "nl80211" ] || wpa_key_mgmt="WPA-NONE"
 563         }
 564
 565         [[ "$_w_mode" = "mesh" ]] && {
 566                 append network_data "mode=5" "$N$T"
 567                 [ -n "$channel" ] && {
 568                         freq="$(get_freq "$phy" "$channel")"
 569                         append network_data "frequency=$freq" "$N$T"
 570                 }
 571                 wpa_key_mgmt="SAE"
 572                 scan_ssid=""
 573         }
 574
 575         [[ "$_w_mode" = "adhoc" -o "$_w_mode" = "mesh" ]] && append network_data "$_w_modestr" "$N$T"
 576
 577         case "$auth_type" in
 578                 none) ;;
 579                 wep)
 580                         local wep_keyidx=0
 581                         hostapd_append_wep_key network_data
 582                         append network_data "wep_tx_keyidx=$wep_keyidx" "$N$T"
 583                 ;;
 584                 psk)
 585                         local passphrase
 586
 587                         key_mgmt="$wpa_key_mgmt"
 588                         if [ ${#key} -eq 64 ]; then
 589                                 passphrase="psk=${key}"
 590                         else
 591                                 passphrase="psk=\"${key}\""
 592                         fi
 593                         append network_data "$passphrase" "$N$T"
 594                 ;;
 595                 eap)
 596                         key_mgmt='WPA-EAP'
 597
 598                         json_get_vars eap_type identity ca_cert
 599                         [ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
 600                         [ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T"
 601                         case "$eap_type" in
 602                                 tls)
 603                                         json_get_vars client_cert priv_key priv_key_pwd
 604                                         append network_data "client_cert=\"$client_cert\"" "$N$T"
 605                                         append network_data "private_key=\"$priv_key\"" "$N$T"
 606                                         append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
 607                                 ;;
 608                                 peap|ttls)
 609                                         json_get_vars auth password
 610                                         set_default auth MSCHAPV2
 611                                         append network_data "phase2=\"$auth\"" "$N$T"
 612                                         append network_data "password=\"$password\"" "$N$T"
 613                                 ;;
 614                         esac
 615                         append network_data "eap=$(echo $eap_type | tr 'a-z' 'A-Z')" "$N$T"
 616                 ;;
 617         esac
 618
 619         [ "$mode" = mesh ] || {
 620                 case "$wpa" in
 621                         1)
 622                                 append network_data "proto=WPA" "$N$T"
 623                         ;;
 624                         2)
 625                                 append network_data "proto=RSN" "$N$T"
 626                         ;;
 627                 esac
 628
 629                 case "$ieee80211w" in
 630                         [012])
 631                                 [ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T"
 632                         ;;
 633                 esac
 634         }
 635         local beacon_int brates mrate
 636         [ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
 637         [ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
 638
 639         local bssid_blacklist bssid_whitelist
 640         json_get_values bssid_blacklist bssid_blacklist
 641         json_get_values bssid_whitelist bssid_whitelist
 642
 643         [ -n "$bssid_blacklist" ] && append network_data "bssid_blacklist=$bssid_blacklist" "$N$T"
 644         [ -n "$bssid_whitelist" ] && append network_data "bssid_whitelist=$bssid_whitelist" "$N$T"
 645
 646         [ -n "$basic_rate" ] && {
 647                 local br rate_list=
 648                 for br in $basic_rate; do
 649                         wpa_supplicant_add_rate rate_list "$br"
 650                 done
 651                 [ -n "$rate_list" ] && append network_data "rates=$rate_list" "$N$T"
 652         }
 653
 654         [ -n "$mcast_rate" ] && {
 655                 local mc_rate=
 656                 wpa_supplicant_add_rate mc_rate "$mcast_rate"
 657                 append network_data "mcast_rate=$mc_rate" "$N$T"
 658         }
 659
 660         local ht_str
 661         [[ "$_w_mode" = adhoc ]] || ibss_htmode=
 662         [ -n "$ibss_htmode" ] && append network_data "htmode=$ibss_htmode" "$N$T"
 663
 664         cat >> "$_config" <<EOF
 665 network={
 666         $scan_ssid
 667         ssid="$ssid"
 668         key_mgmt=$key_mgmt
 669         $network_data
 670 }
 671 EOF
 672         return 0
 673 }
 674
 675 wpa_supplicant_run() {
 676         local ifname="$1"; shift
 677
 678         _wpa_supplicant_common "$ifname"
 679
 680         /usr/sbin/wpa_supplicant -B \
 681                 ${network_bridge:+-b $network_bridge} \
 682                 -P "/var/run/wpa_supplicant-${ifname}.pid" \
 683                 -D ${_w_driver:-wext} \
 684                 -i "$ifname" \
 685                 -c "$_config" \
 686                 -C "$_rpath" \
 687                 "$@"
 688
 689         ret="$?"
 690         wireless_add_process "$(cat "/var/run/wpa_supplicant-${ifname}.pid")" /usr/sbin/wpa_supplicant 1
 691
 692         [ "$ret" != 0 ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
 693
 694         return $ret
 695 }
 696
 697 hostapd_common_cleanup() {
 698         killall hostapd wpa_supplicant meshd-nl80211
 699 }