From bfb710247b84122e948188c38c4dbf1dc261cb9a Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 31 Oct 2014 11:00:42 +0000 Subject: [PATCH] lantiq: vr9-vdsl-fw: properly write firmware to flash Using a redirect to a non-empty mtd partition will not erase the blocks prior to writing to them resulting in broken dsl_fw. Fix this by piping to mtd write - /dev/mtdX instead. Signed-off-by: Daniel Golle git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43125 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh b/package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh index 63ed948687..858e8f1aed 100755 --- a/package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh +++ b/package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh @@ -49,7 +49,7 @@ D=`md5sum -b ${FW_DSL} | cut -d" " -f1` MTD=$(find_mtd_index dsl_fw) if [ "$MTD" -gt 0 -a -e "/dev/mtd$MTD" ]; then echo "Storing firmware in flash" - tar cvz ${FW_TAPI} ${FW_DSL} > "/dev/mtd$MTD" + tar cvz ${FW_TAPI} ${FW_DSL} | mtd write - "/dev/mtd$MTD" /etc/init.d/dsl_fs boot else cp ${FW_TAPI} ${FW_DSL} /lib/firmware/ -- 2.11.0