X-Git-Url: https://git.archive.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FWR512-3GN-8M.dts;h=d0cc0efb6364d6f75a4b4c59a3f189e34b02bbaa;hb=8311960f45349102bdd094c17224f97339c85e46;hp=2a288e5bf28fdb4730f4f71ea0b6545d70f4d72b;hpb=af6f122ebdc85469a44781f807b7a808190792aa;p=openwrt.git diff --git a/target/linux/ramips/dts/WR512-3GN-8M.dts b/target/linux/ramips/dts/WR512-3GN-8M.dts index 2a288e5bf2..d0cc0efb63 100644 --- a/target/linux/ramips/dts/WR512-3GN-8M.dts +++ b/target/linux/ramips/dts/WR512-3GN-8M.dts @@ -6,31 +6,18 @@ compatible = "WR512-3GN", "ralink,rt3052-soc"; model = "WR512-3GN-like router"; - memorydetect { - ralink,memory = <0x0 0x200000 0x4000000>; - }; - - chosen { - bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)"; - }; - - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; - ralink,gpiomux = "mdio"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; cfi@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; - bank-width = <2>; device-width = <2>; #address-cells = <1>; @@ -60,33 +47,37 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + gpio-leds { compatible = "gpio-leds"; + 3g { label = "wr512:green:3g"; gpios = <&gpio0 9 1>; }; + gateway { label = "wr512:green:gateway"; gpios = <&gpio0 11 1>; }; + ap { label = "wr512:green:ap"; gpios = <&gpio0 12 1>; }; + wps { label = "wr512:green:wps"; gpios = <&gpio0 14 1>; }; + station { label = "wr512:green:station"; gpios = <&gpio0 13 1>; @@ -98,11 +89,13 @@ #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; + reset_wps { label = "reset_wps"; gpios = <&gpio0 10 1>; linux,code = <0x198>; }; + mode { label = "mode"; gpios = <&gpio0 7 1>; @@ -110,10 +103,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; };