X-Git-Url: https://git.archive.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FWHR-G300N.dts;h=1aa9f696fc72e58887c4bd31eaafa2a88fbff9c3;hb=d2d0823fc430fdaeec94cdf383bb6e4f05b14b6d;hp=d919405ce3effe9f533f3bdd1b4126a6d697fc8f;hpb=c8c899e2aa030a98bdd78d182e588c15c5cf508c;p=openwrt.git

diff --git a/target/linux/ramips/dts/WHR-G300N.dts b/target/linux/ramips/dts/WHR-G300N.dts
index d919405ce3..1aa9f696fc 100644
--- a/target/linux/ramips/dts/WHR-G300N.dts
+++ b/target/linux/ramips/dts/WHR-G300N.dts
@@ -6,55 +6,46 @@
 	compatible = "WHR-G300N", "ralink,rt3052-soc";
 	model = "Buffalo WHR-G300N";
 
-	memorydetect {
-		ralink,memory = <0x0 0x200000 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	palmbus@10000000 {
-		sysc@0 {
-			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-			ralink,uartmux = "gpio";
-			ralink,wdtmux = <1>;
-		};
-
-		gpio0: gpio@600 {
-			status = "okay";
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+				ralink,function = "gpio";
+			};
 		};
 	};
 
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 
-	ethernet@10100000 {
-		status = "okay";
-	};
-
 	esw@10110000 {
-		status = "okay";
 		ralink,portmap = <0x2f>;
 	};
 
+	/* FIXME: no partitions defined */
+/*	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+*/
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		diag {
 			label = "whr-g300n:red:diag";
 			gpios = <&gpio0 7 1>;
 		};
+
 		router {
 			label = "whr-g300n:green:router";
 			gpios = <&gpio0 9 1>;
 		};
+
 		security {
 			label = "whr-g300n:amber:security";
 			gpios = <&gpio0 14 1>;
@@ -66,29 +57,29 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		aoss {
 			label = "aoss";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x211>;
 		};
+
 		router-off {
 			label = "router-off";
 			gpios = <&gpio0 11 1>;
 			linux,code = <0x102>;
 		};
+
 		router-on {
 			label = "router-on";
 			gpios = <&gpio0 8 1>;
 			linux,code = <0x103>;
 		};
 	};
-
-	wmac@10180000 {
-		status = "okay";
-	};
 };