X-Git-Url: https://git.archive.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FESR-9753.dts;h=67d8539f9d397e1e72a02078901e2c7920ca10af;hb=7a3a071d4731e2fae2f2a9ae9abbe730aeddb6e7;hp=19891e41b8aa691358151b024af6aca98ac3ae74;hpb=673f5934497dbae5f876d634d538eac4f0c99273;p=openwrt.git diff --git a/target/linux/ramips/dts/ESR-9753.dts b/target/linux/ramips/dts/ESR-9753.dts index 19891e41b8..67d8539f9d 100644 --- a/target/linux/ramips/dts/ESR-9753.dts +++ b/target/linux/ramips/dts/ESR-9753.dts @@ -3,48 +3,58 @@ /include/ "rt3050.dtsi" / { - #address-cells = <1>; - #size-cells = <1>; compatible = "ESR-9753", "ralink,rt3052-soc"; model = "Senao / EnGenius ESR-9753"; - memorydetect { - ralink,memory = <0x0 0x200000 0x4000000>; - }; - - chosen { - bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; - }; - - palmbus@10000000 { - sysc@0 { - ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - }; cfi@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; - bank-width = <2>; device-width = <2>; #address-cells = <1>; #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; }; gpio-leds { compatible = "gpio-leds"; + power { label = "esr-9753:orange:power"; gpios = <&gpio0 8 1>; }; + wps { label = "esr-9753:orange:wps"; gpios = <&gpio0 14 1>; @@ -56,11 +66,13 @@ #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; + reset { label = "reset"; gpios = <&gpio0 10 1>; linux,code = <0x198>; }; + wps { label = "wps"; gpios = <&gpio0 0 1>; @@ -69,15 +81,14 @@ }; ethernet@10100000 { - status = "okay"; + mtd-mac-address = <&factory 0x4>; }; esw@10110000 { - status = "okay"; - ralink,portmap = <0x3e>; + mediatek,portmap = <0x3e>; }; wmac@10180000 { - status = "okay"; + ralink,mtd-eeprom = <&factory 0>; }; };