X-Git-Url: https://git.archive.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FBC2.dts;h=d920b6e88230a3703166d280890c3157ff571f59;hb=17104f2f0e86feceb899855fe683f105966fb7df;hp=99c1f395501ca048ad53c08287ef57ab9ab747cd;hpb=aec02c1c2753889e3794018aad363d3ff8d9498b;p=openwrt.git

diff --git a/target/linux/ramips/dts/BC2.dts b/target/linux/ramips/dts/BC2.dts
index 99c1f39550..d920b6e882 100644
--- a/target/linux/ramips/dts/BC2.dts
+++ b/target/linux/ramips/dts/BC2.dts
@@ -3,45 +3,53 @@
 /include/ "rt3050.dtsi"
 
 / {
-	#address-cells = <1>;
-	#size-cells = <1>;
 	compatible = "BC2", "ralink,rt3052-soc";
 	model = "NexAira BC2";
 
-	memorydetect {
-		ralink,memory = <0x0 0x200000 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
-	};
-
-	palmbus@10000000 {
-		sysc@0 {
-			ralink,pinmmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
-			ralink,gpiomux = "jtag";
-			ralink,uartmux = "gpio";
-			ralink,wdtmux = <1>;
-		};
-
-		gpio0: gpio@600 {
-			status = "okay";
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+				ralink,function = "gpio";
+			};
 		};
-
 	};
 
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x7b0000>;
+		};
 	};
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		usb {
 			label = "bc2:blue:usb";
 			gpios = <&gpio0 20 1>;
@@ -53,6 +61,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 17 1>;
@@ -61,16 +70,15 @@
 	};
 
 	ethernet@10100000 {
-		status = "okay";
+		mtd-mac-address = <&factory 0x4>;
 	};
 
 	esw@10110000 {
-		status = "okay";
 		ralink,portmap = <0x2f>;
 	};
 
 	wmac@10180000 {
-		status = "okay";
+		ralink,mtd-eeprom = <&factory 0>;
 	};
 
 	otg@101c0000 {