X-Git-Url: https://git.archive.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Far71xx%2Ffiles%2Farch%2Fmips%2Far71xx%2Fmach-tl-wr1043nd.c;h=99cb7d843ae588edc5503dce96bca1528d545718;hb=a393655eea19a5375e43c545bf104ab906fc72e9;hp=f36d3600e253c167ff298d13116be9deed31ffa2;hpb=1bb20685418e882074c97230a76eeb8835d9288f;p=openwrt.git

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
index f36d3600e2..99cb7d843a 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
@@ -8,18 +8,19 @@
  *  by the Free Software Foundation.
  */
 
-#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-
-#include <asm/mips_machine.h>
+#include <linux/platform_device.h>
+#include <linux/rtl8366rb.h>
 #include <asm/mach-ar71xx/ar71xx.h>
 
+#include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ar913x-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
+#include "dev-usb.h"
 
 #define TL_WR1043ND_GPIO_LED_USB        1
 #define TL_WR1043ND_GPIO_LED_SYSTEM     2
@@ -29,6 +30,9 @@
 #define TL_WR1043ND_GPIO_BTN_RESET      3
 #define TL_WR1043ND_GPIO_BTN_QSS        7
 
+#define TL_WR1043ND_GPIO_RTL8366_SDA	18
+#define TL_WR1043ND_GPIO_RTL8366_SCK	19
+
 #define TL_WR1043ND_BUTTONS_POLL_INTERVAL     20
 
 #ifdef CONFIG_MTD_PARTITIONS
@@ -90,32 +94,44 @@ static struct gpio_button tl_wr1043nd_gpio_buttons[] __initdata = {
 	{
 		.desc		= "reset",
 		.type		= EV_KEY,
-		.code		= BTN_0,
-		.threshold	= 5,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
 		.gpio		= TL_WR1043ND_GPIO_BTN_RESET,
 		.active_low	= 1,
 	}, {
 		.desc		= "qss",
 		.type		= EV_KEY,
-		.code		= BTN_1,
-		.threshold	= 5,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
 		.gpio		= TL_WR1043ND_GPIO_BTN_QSS,
 		.active_low	= 1,
 	}
 };
 
+static struct rtl8366rb_platform_data tl_wr1043nd_rtl8366rb_data = {
+	.gpio_sda        = TL_WR1043ND_GPIO_RTL8366_SDA,
+	.gpio_sck        = TL_WR1043ND_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device tl_wr1043nd_rtl8366rb_device = {
+	.name		= RTL8366RB_DRIVER_NAME,
+	.id		= -1,
+	.dev = {
+		.platform_data	= &tl_wr1043nd_rtl8366rb_data,
+	}
+};
+
 static void __init tl_wr1043nd_setup(void)
 {
 	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
 
-	ar71xx_set_mac_base(mac);
-
-	ar71xx_add_device_mdio(0x0);
-
+	ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+	ar71xx_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev;
 	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ar71xx_eth0_data.phy_mask = 0x0;
 	ar71xx_eth0_data.speed = SPEED_1000;
 	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+	ar71xx_eth0_pll_data.pll_1000 = 0x1a000000;
 
 	ar71xx_add_device_eth(0);
 
@@ -126,10 +142,14 @@ static void __init tl_wr1043nd_setup(void)
 	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
 					tl_wr1043nd_leds_gpio);
 
+	platform_device_register(&tl_wr1043nd_rtl8366rb_device);
+
 	ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL,
 					ARRAY_SIZE(tl_wr1043nd_gpio_buttons),
 					tl_wr1043nd_gpio_buttons);
-	ar913x_add_device_wmac();
+
+	ar913x_add_device_wmac(eeprom, mac);
 }
 
-MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TP-LINK TL-WR1043ND", tl_wr1043nd_setup);
+MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND",
+	     tl_wr1043nd_setup);