X-Git-Url: http://git.archive.openwrt.org/?p=project%2Fluci.git;a=blobdiff_plain;f=modules%2Fluci-mod-admin-mini%2Fluasrc%2Fview%2Fmini%2Fupgrade.htm;fp=modules%2Fluci-mod-admin-mini%2Fluasrc%2Fview%2Fmini%2Fupgrade.htm;h=6ff5d84919db907f7d90e4e1f9d2ae4730454ff8;hp=0000000000000000000000000000000000000000;hb=1bb4822dca6113f73e3bc89e2acf15935e6f8e92;hpb=9edd0e46c3f880727738ce8ca6ff1c8b85f99ef4
diff --git a/modules/luci-mod-admin-mini/luasrc/view/mini/upgrade.htm b/modules/luci-mod-admin-mini/luasrc/view/mini/upgrade.htm
new file mode 100644
index 000000000..6ff5d8491
--- /dev/null
+++ b/modules/luci-mod-admin-mini/luasrc/view/mini/upgrade.htm
@@ -0,0 +1,105 @@
+<%#
+LuCI - Lua Configuration Interface
+Copyright 2008 Steven Barth <%:System%>
+<%:Flash Firmware%>
+
+<% if step == 1 then %>
+ <% if supported then %>
+
+ <%_ The flash image was uploaded.
+ Below is the checksum and file size listed,
+ compare them with the original file to ensure data integrity.
+ Click "Proceed" below to start the flash procedure. %>
+
+ <% if flashsize > 0 and filesize > flashsize then %>
+
+
<%=checksum%>
<%_ The system is flashing now.
+ DO NOT POWER OFF THE DEVICE!
+ Wait a few minutes before you try to reconnect.
+ It might be necessary to renew the address of your computer to reach the device
+ again, depending on your settings. %>