+++ /dev/null
---[[
-LuCI - Lua Configuration Interface
-
-Copyright 2008 Steven Barth <steven@midlink.org>
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
-$Id$
-]]--
-
-local wa = require "luci.tools.webadmin"
-local nw = require "luci.model.network"
-local ut = require "luci.util"
-local nt = require "luci.sys".net
-local fs = require "nixio.fs"
-
-arg[1] = arg[1] or ""
-
-m = Map("wireless", "",
- translate("The <em>Device Configuration</em> section covers physical settings of the radio " ..
- "hardware such as channel, transmit power or antenna selection which are shared among all " ..
- "defined wireless networks (if the radio hardware is multi-SSID capable). Per network settings " ..
- "like encryption or operation mode are grouped in the <em>Interface Configuration</em>."))
-
-m:chain("network")
-m:chain("firewall")
-
-local ifsection
-
-function m.on_commit(map)
- local wnet = nw:get_wifinet(arg[1])
- if ifsection and wnet then
- ifsection.section = wnet.sid
- m.title = luci.util.pcdata(wnet:get_i18n())
- end
-end
-
-nw.init(m.uci)
-
-local wnet = nw:get_wifinet(arg[1])
-local wdev = wnet and wnet:get_device()
-
--- redirect to overview page if network does not exist anymore (e.g. after a revert)
-if not wnet or not wdev then
- luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless"))
- return
-end
-
--- wireless toggle was requested, commit and reload page
-function m.parse(map)
- if m:formvalue("cbid.wireless.%s.__toggle" % wdev:name()) then
- if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
- wnet:set("disabled", nil)
- else
- wnet:set("disabled", "1")
- end
- wdev:set("disabled", nil)
-
- nw:commit("wireless")
- luci.sys.call("(env -i /bin/ubus call network reload) >/dev/null 2>/dev/null")
-
- luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless", arg[1]))
- return
- end
- Map.parse(map)
-end
-
-m.title = luci.util.pcdata(wnet:get_i18n())
-
-
-local function txpower_list(iw)
- local list = iw.txpwrlist or { }
- local off = tonumber(iw.txpower_offset) or 0
- local new = { }
- local prev = -1
- local _, val
- for _, val in ipairs(list) do
- local dbm = val.dbm + off
- local mw = math.floor(10 ^ (dbm / 10))
- if mw ~= prev then
- prev = mw
- new[#new+1] = {
- display_dbm = dbm,
- display_mw = mw,
- driver_dbm = val.dbm,
- driver_mw = val.mw
- }
- end
- end
- return new
-end
-
-local function txpower_current(pwr, list)
- pwr = tonumber(pwr)
- if pwr ~= nil then
- local _, item
- for _, item in ipairs(list) do
- if item.driver_dbm >= pwr then
- return item.driver_dbm
- end
- end
- end
- return (list[#list] and list[#list].driver_dbm) or pwr or 0
-end
-
-local iw = luci.sys.wifi.getiwinfo(arg[1])
-local hw_modes = iw.hwmodelist or { }
-local tx_power_list = txpower_list(iw)
-local tx_power_cur = txpower_current(wdev:get("txpower"), tx_power_list)
-
-s = m:section(NamedSection, wdev:name(), "wifi-device", translate("Device Configuration"))
-s.addremove = false
-
-s:tab("general", translate("General Setup"))
-s:tab("macfilter", translate("MAC-Filter"))
-s:tab("advanced", translate("Advanced Settings"))
-
---[[
-back = s:option(DummyValue, "_overview", translate("Overview"))
-back.value = ""
-back.titleref = luci.dispatcher.build_url("admin", "network", "wireless")
-]]
-
-st = s:taboption("general", DummyValue, "__status", translate("Status"))
-st.template = "admin_network/wifi_status"
-st.ifname = arg[1]
-
-en = s:taboption("general", Button, "__toggle")
-
-if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
- en.title = translate("Wireless network is disabled")
- en.inputtitle = translate("Enable")
- en.inputstyle = "apply"
-else
- en.title = translate("Wireless network is enabled")
- en.inputtitle = translate("Disable")
- en.inputstyle = "reset"
-end
-
-
-local hwtype = wdev:get("type")
-
--- NanoFoo
-local nsantenna = wdev:get("antenna")
-
--- Check whether there are client interfaces on the same radio,
--- if yes, lock the channel choice as these stations will dicatate the freq
-local found_sta = nil
-local _, net
-if wnet:mode() ~= "sta" then
- for _, net in ipairs(wdev:get_wifinets()) do
- if net:mode() == "sta" then
- if not found_sta then
- found_sta = {}
- found_sta.channel = net:channel()
- found_sta.names = {}
- end
- found_sta.names[#found_sta.names+1] = net:shortname()
- end
- end
-end
-
-if found_sta then
- ch = s:taboption("general", DummyValue, "choice", translate("Channel"))
- ch.value = translatef("Locked to channel %d used by: %s",
- found_sta.channel, table.concat(found_sta.names, ", "))
-else
- ch = s:taboption("general", Value, "_mode_freq", '<br />'..translate("Operating frequency"))
- ch.hwmodes = iw.hwmodelist
- ch.freqlist = iw.freqlist
- ch.template = "cbi/wireless_modefreq"
-
- function ch.cfgvalue(self, section)
- return {
- m:get(section, "hwmode") or "",
- m:get(section, "channel") or "auto",
- m:get(section, "htmode") or ""
- }
- end
-
- function ch.formvalue(self, section)
- return {
- m:formvalue(self:cbid(section) .. ".band") or (iw.hwmodelist.g and "11g" or "11a"),
- m:formvalue(self:cbid(section) .. ".channel") or "auto",
- m:formvalue(self:cbid(section) .. ".htmode") or ""
- }
- end
-
- function ch.write(self, section, value)
- m:set(section, "hwmode", value[1])
- m:set(section, "channel", value[2])
- m:set(section, "htmode", value[3])
- end
-end
-
-------------------- MAC80211 Device ------------------
-
-if hwtype == "mac80211" then
- if #tx_power_list > 1 then
- tp = s:taboption("general", ListValue,
- "txpower", translate("Transmit Power"), "dBm")
- tp.rmempty = true
- tp.default = tx_power_cur
- function tp.cfgvalue(...)
- return txpower_current(Value.cfgvalue(...), tx_power_list)
- end
-
- for _, p in ipairs(tx_power_list) do
- tp:value(p.driver_dbm, "%i dBm (%i mW)"
- %{ p.display_dbm, p.display_mw })
- end
- end
-
- local cl = iw and iw.countrylist
- if cl and #cl > 0 then
- cc = s:taboption("advanced", ListValue, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
- cc.default = tostring(iw and iw.country or "00")
- for _, c in ipairs(cl) do
- cc:value(c.alpha2, "%s - %s" %{ c.alpha2, c.name })
- end
- else
- s:taboption("advanced", Value, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
- end
-
- s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
- translate("Distance to farthest network member in meters."))
-
- -- external antenna profiles
- local eal = iw and iw.extant
- if eal and #eal > 0 then
- ea = s:taboption("advanced", ListValue, "extant", translate("Antenna Configuration"))
- for _, eap in ipairs(eal) do
- ea:value(eap.id, "%s (%s)" %{ eap.name, eap.description })
- if eap.selected then
- ea.default = eap.id
- end
- end
- end
-
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
-end
-
-
-------------------- Madwifi Device ------------------
-
-if hwtype == "atheros" then
- tp = s:taboption("general",
- (#tx_power_list > 0) and ListValue or Value,
- "txpower", translate("Transmit Power"), "dBm")
-
- tp.rmempty = true
- tp.default = tx_power_cur
-
- function tp.cfgvalue(...)
- return txpower_current(Value.cfgvalue(...), tx_power_list)
- end
-
- for _, p in ipairs(tx_power_list) do
- tp:value(p.driver_dbm, "%i dBm (%i mW)"
- %{ p.display_dbm, p.display_mw })
- end
-
- s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
-
- if not nsantenna then
- ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
- ant1.widget = "radio"
- ant1.orientation = "horizontal"
- ant1:depends("diversity", "")
- ant1:value("0", translate("auto"))
- ant1:value("1", translate("Antenna 1"))
- ant1:value("2", translate("Antenna 2"))
-
- ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
- ant2.widget = "radio"
- ant2.orientation = "horizontal"
- ant2:depends("diversity", "")
- ant2:value("0", translate("auto"))
- ant2:value("1", translate("Antenna 1"))
- ant2:value("2", translate("Antenna 2"))
-
- else -- NanoFoo
- local ant = s:taboption("advanced", ListValue, "antenna", translate("Transmitter Antenna"))
- ant:value("auto")
- ant:value("vertical")
- ant:value("horizontal")
- ant:value("external")
- end
-
- s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
- translate("Distance to farthest network member in meters."))
- s:taboption("advanced", Value, "regdomain", translate("Regulatory Domain"))
- s:taboption("advanced", Value, "country", translate("Country Code"))
- s:taboption("advanced", Flag, "outdoor", translate("Outdoor Channels"))
-
- --s:option(Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
-end
-
-
-
-------------------- Broadcom Device ------------------
-
-if hwtype == "broadcom" then
- tp = s:taboption("general",
- (#tx_power_list > 0) and ListValue or Value,
- "txpower", translate("Transmit Power"), "dBm")
-
- tp.rmempty = true
- tp.default = tx_power_cur
-
- function tp.cfgvalue(...)
- return txpower_current(Value.cfgvalue(...), tx_power_list)
- end
-
- for _, p in ipairs(tx_power_list) do
- tp:value(p.driver_dbm, "%i dBm (%i mW)"
- %{ p.display_dbm, p.display_mw })
- end
-
- ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
- ant1.widget = "radio"
- ant1:depends("diversity", "")
- ant1:value("3", translate("auto"))
- ant1:value("0", translate("Antenna 1"))
- ant1:value("1", translate("Antenna 2"))
-
- ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
- ant2.widget = "radio"
- ant2:depends("diversity", "")
- ant2:value("3", translate("auto"))
- ant2:value("0", translate("Antenna 1"))
- ant2:value("1", translate("Antenna 2"))
-
- s:taboption("advanced", Flag, "frameburst", translate("Frame Bursting"))
-
- s:taboption("advanced", Value, "distance", translate("Distance Optimization"))
- --s:option(Value, "slottime", translate("Slot time"))
-
- s:taboption("advanced", Value, "country", translate("Country Code"))
- s:taboption("advanced", Value, "maxassoc", translate("Connection Limit"))
-end
-
-
---------------------- HostAP Device ---------------------
-
-if hwtype == "prism2" then
- s:taboption("advanced", Value, "txpower", translate("Transmit Power"), "att units").rmempty = true
-
- s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
-
- s:taboption("advanced", Value, "txantenna", translate("Transmitter Antenna"))
- s:taboption("advanced", Value, "rxantenna", translate("Receiver Antenna"))
-end
-
-
------------------------ Interface -----------------------
-
-s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
-ifsection = s
-s.addremove = false
-s.anonymous = true
-s.defaults.device = wdev:name()
-
-s:tab("general", translate("General Setup"))
-s:tab("encryption", translate("Wireless Security"))
-s:tab("macfilter", translate("MAC-Filter"))
-s:tab("advanced", translate("Advanced Settings"))
-
-s:taboption("general", Value, "ssid", translate("<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
-
-mode = s:taboption("general", ListValue, "mode", translate("Mode"))
-mode.override_values = true
-mode:value("ap", translate("Access Point"))
-mode:value("sta", translate("Client"))
-mode:value("adhoc", translate("Ad-Hoc"))
-
-bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"))
-
-network = s:taboption("general", Value, "network", translate("Network"),
- translate("Choose the network(s) you want to attach to this wireless interface or " ..
- "fill out the <em>create</em> field to define a new network."))
-
-network.rmempty = true
-network.template = "cbi/network_netlist"
-network.widget = "checkbox"
-network.novirtual = true
-
-function network.write(self, section, value)
- local i = nw:get_interface(section)
- if i then
- if value == '-' then
- value = m:formvalue(self:cbid(section) .. ".newnet")
- if value and #value > 0 then
- local n = nw:add_network(value, {proto="none"})
- if n then n:add_interface(i) end
- else
- local n = i:get_network()
- if n then n:del_interface(i) end
- end
- else
- local v
- for _, v in ipairs(i:get_networks()) do
- v:del_interface(i)
- end
- for v in ut.imatch(value) do
- local n = nw:get_network(v)
- if n then
- if not n:is_empty() then
- n:set("type", "bridge")
- end
- n:add_interface(i)
- end
- end
- end
- end
-end
-
--------------------- MAC80211 Interface ----------------------
-
-if hwtype == "mac80211" then
- if fs.access("/usr/sbin/iw") then
- mode:value("mesh", "802.11s")
- end
-
- mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
- mode:value("monitor", translate("Monitor"))
- bssid:depends({mode="adhoc"})
- bssid:depends({mode="sta"})
- bssid:depends({mode="sta-wds"})
-
- mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
- mp:depends({mode="ap"})
- mp:depends({mode="ap-wds"})
- mp:value("", translate("disable"))
- mp:value("allow", translate("Allow listed only"))
- mp:value("deny", translate("Allow all except listed"))
-
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
- ml.datatype = "macaddr"
- ml:depends({macfilter="allow"})
- ml:depends({macfilter="deny"})
- nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
-
- mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
- mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
-
- function mode.write(self, section, value)
- if value == "ap-wds" then
- ListValue.write(self, section, "ap")
- m.uci:set("wireless", section, "wds", 1)
- elseif value == "sta-wds" then
- ListValue.write(self, section, "sta")
- m.uci:set("wireless", section, "wds", 1)
- else
- ListValue.write(self, section, value)
- m.uci:delete("wireless", section, "wds")
- end
- end
-
- function mode.cfgvalue(self, section)
- local mode = ListValue.cfgvalue(self, section)
- local wds = m.uci:get("wireless", section, "wds") == "1"
-
- if mode == "ap" and wds then
- return "ap-wds"
- elseif mode == "sta" and wds then
- return "sta-wds"
- else
- return mode
- end
- end
-
- hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="ap-wds"})
-
- wmm = s:taboption("general", Flag, "wmm", translate("WMM Mode"))
- wmm:depends({mode="ap"})
- wmm:depends({mode="ap-wds"})
- wmm.default = wmm.enabled
-end
-
-
-
--------------------- Madwifi Interface ----------------------
-
-if hwtype == "atheros" then
- mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
- mode:value("monitor", translate("Monitor"))
- mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
- mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
- mode:value("wds", translate("Static WDS"))
-
- function mode.write(self, section, value)
- if value == "ap-wds" then
- ListValue.write(self, section, "ap")
- m.uci:set("wireless", section, "wds", 1)
- elseif value == "sta-wds" then
- ListValue.write(self, section, "sta")
- m.uci:set("wireless", section, "wds", 1)
- else
- ListValue.write(self, section, value)
- m.uci:delete("wireless", section, "wds")
- end
- end
-
- function mode.cfgvalue(self, section)
- local mode = ListValue.cfgvalue(self, section)
- local wds = m.uci:get("wireless", section, "wds") == "1"
-
- if mode == "ap" and wds then
- return "ap-wds"
- elseif mode == "sta" and wds then
- return "sta-wds"
- else
- return mode
- end
- end
-
- bssid:depends({mode="adhoc"})
- bssid:depends({mode="ahdemo"})
- bssid:depends({mode="wds"})
-
- wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
- wdssep:depends({mode="ap-wds"})
-
- s:taboption("advanced", Flag, "doth", "802.11h")
- hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="adhoc"})
- hidden:depends({mode="ap-wds"})
- hidden:depends({mode="sta-wds"})
- isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
- translate("Prevents client-to-client communication"))
- isolate:depends({mode="ap"})
- s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
-
- mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
- mp:value("", translate("disable"))
- mp:value("allow", translate("Allow listed only"))
- mp:value("deny", translate("Allow all except listed"))
-
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
- ml.datatype = "macaddr"
- ml:depends({macpolicy="allow"})
- ml:depends({macpolicy="deny"})
- nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
-
- s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
- s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
- s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
- s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
- s:taboption("advanced", Flag, "compression", translate("Compression"))
-
- s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
- s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
- s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
-
- s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
- s:taboption("advanced", Flag, "xr", translate("XR Support"))
- s:taboption("advanced", Flag, "ar", translate("AR Support"))
-
- local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
- swm:depends({mode="adhoc"})
-
- local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
- nos:depends({mode="sta"})
- nos:depends({mode="sta-wds"})
-
- local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
- probereq.enabled = "0"
- probereq.disabled = "1"
-end
-
-
--------------------- Broadcom Interface ----------------------
-
-if hwtype == "broadcom" then
- mode:value("wds", translate("WDS"))
- mode:value("monitor", translate("Monitor"))
-
- hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="adhoc"})
- hidden:depends({mode="wds"})
-
- isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
- translate("Prevents client-to-client communication"))
- isolate:depends({mode="ap"})
-
- s:taboption("advanced", Flag, "doth", "802.11h")
- s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
-
- bssid:depends({mode="wds"})
- bssid:depends({mode="adhoc"})
-end
-
-
------------------------ HostAP Interface ---------------------
-
-if hwtype == "prism2" then
- mode:value("wds", translate("WDS"))
- mode:value("monitor", translate("Monitor"))
-
- hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="adhoc"})
- hidden:depends({mode="wds"})
-
- bssid:depends({mode="sta"})
-
- mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
- mp:value("", translate("disable"))
- mp:value("allow", translate("Allow listed only"))
- mp:value("deny", translate("Allow all except listed"))
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
- ml:depends({macpolicy="allow"})
- ml:depends({macpolicy="deny"})
- nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
-
- s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
-end
-
-
-------------------- WiFI-Encryption -------------------
-
-encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
-encr.override_values = true
-encr.override_depends = true
-encr:depends({mode="ap"})
-encr:depends({mode="sta"})
-encr:depends({mode="adhoc"})
-encr:depends({mode="ahdemo"})
-encr:depends({mode="ap-wds"})
-encr:depends({mode="sta-wds"})
-encr:depends({mode="mesh"})
-
-cipher = s:taboption("encryption", ListValue, "cipher", translate("Cipher"))
-cipher:depends({encryption="wpa"})
-cipher:depends({encryption="wpa2"})
-cipher:depends({encryption="psk"})
-cipher:depends({encryption="psk2"})
-cipher:depends({encryption="wpa-mixed"})
-cipher:depends({encryption="psk-mixed"})
-cipher:value("auto", translate("auto"))
-cipher:value("ccmp", translate("Force CCMP (AES)"))
-cipher:value("tkip", translate("Force TKIP"))
-cipher:value("tkip+ccmp", translate("Force TKIP and CCMP (AES)"))
-
-function encr.cfgvalue(self, section)
- local v = tostring(ListValue.cfgvalue(self, section))
- if v == "wep" then
- return "wep-open"
- elseif v and v:match("%+") then
- return (v:gsub("%+.+$", ""))
- end
- return v
-end
-
-function encr.write(self, section, value)
- local e = tostring(encr:formvalue(section))
- local c = tostring(cipher:formvalue(section))
- if value == "wpa" or value == "wpa2" then
- self.map.uci:delete("wireless", section, "key")
- end
- if e and (c == "tkip" or c == "ccmp" or c == "tkip+ccmp") then
- e = e .. "+" .. c
- end
- self.map:set(section, "encryption", e)
-end
-
-function cipher.cfgvalue(self, section)
- local v = tostring(ListValue.cfgvalue(encr, section))
- if v and v:match("%+") then
- v = v:gsub("^[^%+]+%+", "")
- if v == "aes" then v = "ccmp"
- elseif v == "tkip+aes" then v = "tkip+ccmp"
- elseif v == "aes+tkip" then v = "tkip+ccmp"
- elseif v == "ccmp+tkip" then v = "tkip+ccmp"
- end
- end
- return v
-end
-
-function cipher.write(self, section)
- return encr:write(section)
-end
-
-
-encr:value("none", "No Encryption")
-encr:value("wep-open", translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"}, {mode="ahdemo"}, {mode="wds"})
-encr:value("wep-shared", translate("WEP Shared Key"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"}, {mode="ahdemo"}, {mode="wds"})
-
-if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
- local supplicant = fs.access("/usr/sbin/wpa_supplicant")
- local hostapd = fs.access("/usr/sbin/hostapd")
-
- -- Probe EAP support
- local has_ap_eap = (os.execute("hostapd -veap >/dev/null 2>/dev/null") == 0)
- local has_sta_eap = (os.execute("wpa_supplicant -veap >/dev/null 2>/dev/null") == 0)
-
- if hostapd and supplicant then
- encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
- encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
- encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
- if has_ap_eap and has_sta_eap then
- encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
- encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
- end
- elseif hostapd and not supplicant then
- encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"})
- encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"})
- encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"})
- if has_ap_eap then
- encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
- encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
- end
- encr.description = translate(
- "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
- "and ad-hoc mode) to be installed."
- )
- elseif not hostapd and supplicant then
- encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
- encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
- encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
- if has_sta_eap then
- encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
- encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
- end
- encr.description = translate(
- "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
- "and ad-hoc mode) to be installed."
- )
- else
- encr.description = translate(
- "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
- "and ad-hoc mode) to be installed."
- )
- end
-elseif hwtype == "broadcom" then
- encr:value("psk", "WPA-PSK")
- encr:value("psk2", "WPA2-PSK")
- encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
-end
-
-auth_server = s:taboption("encryption", Value, "auth_server", translate("Radius-Authentication-Server"))
-auth_server:depends({mode="ap", encryption="wpa"})
-auth_server:depends({mode="ap", encryption="wpa2"})
-auth_server:depends({mode="ap-wds", encryption="wpa"})
-auth_server:depends({mode="ap-wds", encryption="wpa2"})
-auth_server.rmempty = true
-auth_server.datatype = "host"
-
-auth_port = s:taboption("encryption", Value, "auth_port", translate("Radius-Authentication-Port"), translatef("Default %d", 1812))
-auth_port:depends({mode="ap", encryption="wpa"})
-auth_port:depends({mode="ap", encryption="wpa2"})
-auth_port:depends({mode="ap-wds", encryption="wpa"})
-auth_port:depends({mode="ap-wds", encryption="wpa2"})
-auth_port.rmempty = true
-auth_port.datatype = "port"
-
-auth_secret = s:taboption("encryption", Value, "auth_secret", translate("Radius-Authentication-Secret"))
-auth_secret:depends({mode="ap", encryption="wpa"})
-auth_secret:depends({mode="ap", encryption="wpa2"})
-auth_secret:depends({mode="ap-wds", encryption="wpa"})
-auth_secret:depends({mode="ap-wds", encryption="wpa2"})
-auth_secret.rmempty = true
-auth_secret.password = true
-
-acct_server = s:taboption("encryption", Value, "acct_server", translate("Radius-Accounting-Server"))
-acct_server:depends({mode="ap", encryption="wpa"})
-acct_server:depends({mode="ap", encryption="wpa2"})
-acct_server:depends({mode="ap-wds", encryption="wpa"})
-acct_server:depends({mode="ap-wds", encryption="wpa2"})
-acct_server.rmempty = true
-acct_server.datatype = "host"
-
-acct_port = s:taboption("encryption", Value, "acct_port", translate("Radius-Accounting-Port"), translatef("Default %d", 1813))
-acct_port:depends({mode="ap", encryption="wpa"})
-acct_port:depends({mode="ap", encryption="wpa2"})
-acct_port:depends({mode="ap-wds", encryption="wpa"})
-acct_port:depends({mode="ap-wds", encryption="wpa2"})
-acct_port.rmempty = true
-acct_port.datatype = "port"
-
-acct_secret = s:taboption("encryption", Value, "acct_secret", translate("Radius-Accounting-Secret"))
-acct_secret:depends({mode="ap", encryption="wpa"})
-acct_secret:depends({mode="ap", encryption="wpa2"})
-acct_secret:depends({mode="ap-wds", encryption="wpa"})
-acct_secret:depends({mode="ap-wds", encryption="wpa2"})
-acct_secret.rmempty = true
-acct_secret.password = true
-
-wpakey = s:taboption("encryption", Value, "_wpa_key", translate("Key"))
-wpakey:depends("encryption", "psk")
-wpakey:depends("encryption", "psk2")
-wpakey:depends("encryption", "psk+psk2")
-wpakey:depends("encryption", "psk-mixed")
-wpakey.datatype = "wpakey"
-wpakey.rmempty = true
-wpakey.password = true
-
-wpakey.cfgvalue = function(self, section, value)
- local key = m.uci:get("wireless", section, "key")
- if key == "1" or key == "2" or key == "3" or key == "4" then
- return nil
- end
- return key
-end
-
-wpakey.write = function(self, section, value)
- self.map.uci:set("wireless", section, "key", value)
- self.map.uci:delete("wireless", section, "key1")
-end
-
-
-wepslot = s:taboption("encryption", ListValue, "_wep_key", translate("Used Key Slot"))
-wepslot:depends("encryption", "wep-open")
-wepslot:depends("encryption", "wep-shared")
-wepslot:value("1", translatef("Key #%d", 1))
-wepslot:value("2", translatef("Key #%d", 2))
-wepslot:value("3", translatef("Key #%d", 3))
-wepslot:value("4", translatef("Key #%d", 4))
-
-wepslot.cfgvalue = function(self, section)
- local slot = tonumber(m.uci:get("wireless", section, "key"))
- if not slot or slot < 1 or slot > 4 then
- return 1
- end
- return slot
-end
-
-wepslot.write = function(self, section, value)
- self.map.uci:set("wireless", section, "key", value)
-end
-
-local slot
-for slot=1,4 do
- wepkey = s:taboption("encryption", Value, "key" .. slot, translatef("Key #%d", slot))
- wepkey:depends("encryption", "wep-open")
- wepkey:depends("encryption", "wep-shared")
- wepkey.datatype = "wepkey"
- wepkey.rmempty = true
- wepkey.password = true
-
- function wepkey.write(self, section, value)
- if value and (#value == 5 or #value == 13) then
- value = "s:" .. value
- end
- return Value.write(self, section, value)
- end
-end
-
-
-if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
- nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
- nasid:depends({mode="ap", encryption="wpa"})
- nasid:depends({mode="ap", encryption="wpa2"})
- nasid:depends({mode="ap-wds", encryption="wpa"})
- nasid:depends({mode="ap-wds", encryption="wpa2"})
- nasid.rmempty = true
-
- eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
- eaptype:value("tls", "TLS")
- eaptype:value("ttls", "TTLS")
- eaptype:value("peap", "PEAP")
- eaptype:depends({mode="sta", encryption="wpa"})
- eaptype:depends({mode="sta", encryption="wpa2"})
- eaptype:depends({mode="sta-wds", encryption="wpa"})
- eaptype:depends({mode="sta-wds", encryption="wpa2"})
-
- cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
- cacert:depends({mode="sta", encryption="wpa"})
- cacert:depends({mode="sta", encryption="wpa2"})
- cacert:depends({mode="sta-wds", encryption="wpa"})
- cacert:depends({mode="sta-wds", encryption="wpa2"})
-
- clientcert = s:taboption("encryption", FileUpload, "client_cert", translate("Path to Client-Certificate"))
- clientcert:depends({mode="sta", encryption="wpa"})
- clientcert:depends({mode="sta", encryption="wpa2"})
- clientcert:depends({mode="sta-wds", encryption="wpa"})
- clientcert:depends({mode="sta-wds", encryption="wpa2"})
-
- privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
- privkey:depends({mode="sta", eap_type="tls", encryption="wpa2"})
- privkey:depends({mode="sta", eap_type="tls", encryption="wpa"})
- privkey:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
- privkey:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
-
- privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
- privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa2"})
- privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa"})
- privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
- privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
-
-
- auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
- auth:value("PAP")
- auth:value("CHAP")
- auth:value("MSCHAP")
- auth:value("MSCHAPV2")
- auth:depends({mode="sta", eap_type="peap", encryption="wpa2"})
- auth:depends({mode="sta", eap_type="peap", encryption="wpa"})
- auth:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
- auth:depends({mode="sta", eap_type="ttls", encryption="wpa"})
- auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
- auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
- auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
- auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
-
-
- identity = s:taboption("encryption", Value, "identity", translate("Identity"))
- identity:depends({mode="sta", eap_type="peap", encryption="wpa2"})
- identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
- identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
- identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
- identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
- identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
- identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
- identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
-
- password = s:taboption("encryption", Value, "password", translate("Password"))
- password:depends({mode="sta", eap_type="peap", encryption="wpa2"})
- password:depends({mode="sta", eap_type="peap", encryption="wpa"})
- password:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
- password:depends({mode="sta", eap_type="ttls", encryption="wpa"})
- password:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
- password:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
- password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
- password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
-end
-
-if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
- local wpasupplicant = fs.access("/usr/sbin/wpa_supplicant")
- local hostcli = fs.access("/usr/sbin/hostapd_cli")
- if hostcli and wpasupplicant then
- wps = s:taboption("encryption", Flag, "wps_pushbutton", translate("Enable WPS pushbutton, requires WPA(2)-PSK"))
- wps.enabled = "1"
- wps.disabled = "0"
- wps.rmempty = false
- wps:depends("encryption", "psk")
- wps:depends("encryption", "psk2")
- wps:depends("encryption", "psk-mixed")
- end
-end
-
-return m
projects / project / luci.git / blobdiff