end
m = Map (modulename, translate("Advanced Settings"),
- translate("This section contains settings which do not need to be changed under\
- normal circumstances. In addition, here you can configure your system\
- for use with remote SIP devices, and resolve call quality issues by enabling\
+ translate("This section contains settings which do not need to be changed under \
+ normal circumstances. In addition, here you can configure your system \
+ for use with remote SIP devices, and resolve call quality issues by enabling \
the insertion of QoS rules."))
-- Recreate the voip server config, and restart necessary services after changes are commited
s:tab("general", translate("General Settings"))
s:tab("remote_usage", translate("Remote Usage"),
- translatef("You can use your SIP devices/softphones with this system from a remote location\
- as well, as long as your Internet Service Provider gives you a public IP.\
- You will be able to call other local users for free (e.g. other Analog Telephone Adapters (ATAs))\
- and use your VoIP providers to make calls as if you were at local to the PBX.\
- After configuring this tab, go back to where users are configured and see the new\
- Server and Port setting you need to configure the SIP devices with. Please note that by default\
- %s uses UDP port range %d to %d for RTP traffic (which carries voice), in case you need to configure\
+ translatef("You can use your SIP devices/softphones with this system from a remote location \
+ as well, as long as your Internet Service Provider gives you a public IP. \
+ You will be able to call other local users for free (e.g. other Analog Telephone Adapters (ATAs)) \
+ and use your VoIP providers to make calls as if you were at local to the PBX. \
+ After configuring this tab, go back to where users are configured and see the new \
+ Server and Port setting you need to configure the SIP devices with. Please note that by default \
+ %s uses UDP port range %d to %d for RTP traffic (which carries voice), in case you need to configure \
NAT or QoS on another device.", appname, defaultrtpstart, defaultrtpend))
s:tab("qos", translate("QoS Settings"),
and Upload speed."))
ua = s:taboption("general", Value, "useragent", translate("User Agent String"),
- translate("This is the name that the VoIP server will use to identify itself when\
- registering to VoIP (SIP) providers. Some providers require this to a specific\
+ translate("This is the name that the VoIP server will use to identify itself when \
+ registering to VoIP (SIP) providers. Some providers require this to a specific \
string matching a hardware SIP device."))
ua.default = appname
h = s:taboption("remote_usage", Value, "externhost", translate("Domain Name/Dynamic Domain Name"),
- translate("You should either have registered a domain name and have a static IP\
- address, or have configured Dynamic DNS on this router. Enter a\
+ translate("You should either have registered a domain name and have a static IP \
+ address, or have configured Dynamic DNS on this router. Enter a \
domain name which resolves to your external IP address."))
h.datatype = "hostname"
p = s:taboption("remote_usage", Value, "bindport", translate("External SIP Port"),
- translate("Pick a random port number between 6500 and 9500 for the service to listen on.\
- Do not pick the standard 5060, because it is often subject to brute-force attacks.\
- When finished, (1) click \"Save and Apply\", and (2) click the \"Restart VoIP Service\"\
- button above. Finally, (3) look in the \"SIP Device/Softphone Accounts\" section for\
+ translate("Pick a random port number between 6500 and 9500 for the service to listen on. \
+ Do not pick the standard 5060, because it is often subject to brute-force attacks. \
+ When finished, (1) click \"Save and Apply\", and (2) click the \"Restart VoIP Service\" \
+ button above. Finally, (3) look in the \"SIP Device/Softphone Accounts\" section for \
updated Server and Port settings for your SIP Devices/Softphones."))
p.datatype = "port"
p = s:taboption("remote_usage", Value, "rtpstart", translate("RTP Port Range Start"),
- translate("RTP traffic carries actual voice packets. This is the start of the port range\
- which will be used for setting up RTP communication. It's usually OK to leave this\
+ translate("RTP traffic carries actual voice packets. This is the start of the port range \
+ which will be used for setting up RTP communication. It's usually OK to leave this \
at the default value."))
p.datatype = "port"
p.default = defaultrtpstart