msgid "Enabled"
msgstr "启用"
+msgid "Enter value in hex, starting with <code>0x</code>"
+msgstr ""
+
msgid "Error collecting troubleshooting information"
msgstr "收集故障排除信息时出错"
msgid "Failure interval"
msgstr "故障检测间隔"
+msgid "Firewall mask"
+msgstr ""
+
msgid "Flush conntrack table"
msgstr "刷新连接跟踪表"
msgid "Restart MWAN"
msgstr "重启 MWAN"
-msgid "Restore default hotplug script"
-msgstr "恢复默认的 hotplug 脚本"
-
-msgid "Restore..."
-msgstr "恢复..."
-
msgid "Rule"
msgstr "规则"
"down. Leave blank to assume interface is always online"
msgstr "通过 ping 此主机或 IP 地址来确定链路是否在线。留空则认为接口始终在线"
+msgid ""
+"This section allows you to modify the content of \"/etc/mwan3.user\".<br /"
+">The file is also preserved during sysupgrade.<br /><br />Notes:<br />This "
+"file is interpreted as a shell script.<br />The first line of the script "
+"must be "#!/bin/sh" without quotes.<br />Lines beginning with # are "
+"comments and are not executed.<br />Put your custom mwan3 action here, they "
+"will<br />be executed with each netifd hotplug interface event<br />on "
+"interfaces for which mwan3 is enabled.<br /><br />There are three main "
+"environment variables that are passed to this script.<br /><br />$ACTION "
+"Either \"ifup\" or \"ifdown\"<br />$INTERFACE Name of the interface which "
+"went up or down (e.g. \"wan\" or \"wwan\")<br />$DEVICE Physical device name "
+"which interface went up or down (e.g. \"eth0\" or \"wwan0\")<br /><br />"
+msgstr ""
+
msgid "This section allows you to modify the contents of /etc/config/mwan3"
msgstr "这里允许你修改 /etc/config/mwan3 的内容"
msgid "This section allows you to modify the contents of /etc/config/wireless"
msgstr "这里允许你修改 /etc/config/wireless 的内容"
-msgid ""
-"This section allows you to modify the contents of /etc/hotplug.d/iface/16-"
-"mwancustom<br />This is useful for running system commands and/or scripts "
-"based on interface ifup or ifdown hotplug events<br /><br />Notes:<br />The "
-"first line of the script must be "#!/bin/sh" without quotes<br /"
-">Lines beginning with # are comments and are not executed<br /><br /"
-">Available variables:<br />$ACTION is the hotplug event (ifup, ifdown)<br />"
-"$INTERFACE is the interface name (wan1, wan2, etc.)<br />$DEVICE is the "
-"device name attached to the interface (eth0.1, eth1, etc.)"
-msgstr ""
-"这里允许你修改 /etc/hotplug.d/iface/16-mwancustom 的内容<br />这可以在接口 "
-"ifup 或 ifdown Hotplug 事件时运行系统命令或脚本<br /><br />注意:<br />脚本的"
-"第一行必须是 "#!/bin/sh" 不含引号<br />以＃开头的行是注释，不会执行"
-"<br /><br />可用变量:<br />$ACTION 是 Hotplug 事件（ifup, ifdown）<br />"
-"$INTERFACE 是接口名称（wan1、wan2 等）<br />$DEVICE 是连接到接口的设备名称 "
-"（eth0.1、eth1 等）"
-
msgid "Tracking IP"
msgstr "追踪的 IP"
msgid "Tracking hostname or IP address"
msgstr "追踪的主机或 IP 地址"
+msgid "Tracking method"
+msgstr ""
+
msgid "Tracking reliability"
msgstr "追踪可靠性"
msgid "unreachable (reject)"
msgstr "不可达（拒绝）"
+
+#~ msgid "Restore default hotplug script"
+#~ msgstr "恢复默认的 hotplug 脚本"
+
+#~ msgid "Restore..."
+#~ msgstr "恢复..."
+
+#~ msgid ""
+#~ "This section allows you to modify the contents of /etc/hotplug.d/iface/16-"
+#~ "mwancustom<br />This is useful for running system commands and/or scripts "
+#~ "based on interface ifup or ifdown hotplug events<br /><br />Notes:<br /"
+#~ ">The first line of the script must be "#!/bin/sh" without "
+#~ "quotes<br />Lines beginning with # are comments and are not executed<br /"
+#~ "><br />Available variables:<br />$ACTION is the hotplug event (ifup, "
+#~ "ifdown)<br />$INTERFACE is the interface name (wan1, wan2, etc.)<br />"
+#~ "$DEVICE is the device name attached to the interface (eth0.1, eth1, etc.)"
+#~ msgstr ""
+#~ "这里允许你修改 /etc/hotplug.d/iface/16-mwancustom 的内容<br />这可以在接"
+#~ "口 ifup 或 ifdown Hotplug 事件时运行系统命令或脚本<br /><br />注意:<br />"
+#~ "脚本的第一行必须是 "#!/bin/sh" 不含引号<br />以＃开头的行是注释，"
+#~ "不会执行<br /><br />可用变量:<br />$ACTION 是 Hotplug 事件（ifup, ifdown）"
+#~ "<br />$INTERFACE 是接口名称（wan1、wan2 等）<br />$DEVICE 是连接到接口的设"
+#~ "备名称 （eth0.1、eth1 等）"
projects / project / luci.git / blobdiff