From: Hauke Mehrtens Date: Sun, 6 Jul 2014 11:40:51 +0000 (+0000) Subject: b53: hardcode reset GPIO for Linksys WRT300N 1.1 X-Git-Url: http://git.archive.openwrt.org/?a=commitdiff_plain;h=fe902ca05125a03d3b4ea4e27d3867faf810f458;p=15.05%2Fopenwrt.git b53: hardcode reset GPIO for Linksys WRT300N 1.1 According to the thread https://forum.openwrt.org/viewtopic.php?id=48281 b53 uses GPIO 7: [ 4.470000] b53_common: [DBG] b53_switch_reset_gpio using 7 and causes device to self-reboot. GPIO 8 was found in CFE boot log: "Reset switch via GPIO 8 ..." Signed-off-by: Rafał Miłecki git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41526 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_priv.h b/target/linux/generic/files/drivers/net/phy/b53/b53_priv.h index ce5b530e98..bc9b53368b 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_priv.h +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_priv.h @@ -308,6 +308,7 @@ static inline int b53_switch_get_reset_gpio(struct b53_device *dev) enum bcm47xx_board board = bcm47xx_board_get(); switch (board) { + case BCM47XX_BOARD_LINKSYS_WRT300NV11: case BCM47XX_BOARD_LINKSYS_WRT310NV1: return 8; default: