PKG_NAME:=mac80211
-PKG_VERSION:=2011-01-05
+PKG_VERSION:=2011-01-19
PKG_RELEASE:=1
PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
-PKG_MD5SUM:=2b87fdd08d95fa5def39f56f49c4906d
+PKG_MD5SUM:=74a76771c142de86e548565cc6888f3f
PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
err:
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -791,6 +791,8 @@ struct ath_hw {
+@@ -794,6 +794,8 @@ struct ath_hw {
int initPDADC;
int PDADCdelta;
u8 led_pin;
struct ar5416IniArray iniCommon;
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1171,6 +1171,20 @@ static bool ath9k_hw_channel_change(stru
+@@ -1172,6 +1172,20 @@ static bool ath9k_hw_channel_change(stru
return true;
}
bool ath9k_hw_check_alive(struct ath_hw *ah)
{
int count = 50;
-@@ -1459,6 +1473,8 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -1460,6 +1474,8 @@ int ath9k_hw_reset(struct ath_hw *ah, st
if (AR_SREV_9300_20_OR_LATER(ah))
ar9003_hw_bb_watchdog_config(ah);
common->ops = &ath9k_common_ops;
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -790,7 +790,7 @@ struct ath_hw {
+@@ -793,7 +793,7 @@ struct ath_hw {
u32 originalGain[22];
int initPDADC;
int PDADCdelta;
#include "ath5k.h"
#include "reg.h"
-@@ -1726,7 +1728,7 @@ ath5k_eeprom_read_spur_chans(struct ath5
+@@ -1722,7 +1724,7 @@ ath5k_eeprom_read_spur_chans(struct ath5
}
/*
*/
int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
{
-@@ -1734,6 +1736,16 @@ int ath5k_eeprom_read_mac(struct ath5k_h
+@@ -1730,6 +1732,16 @@ int ath5k_eeprom_read_mac(struct ath5k_h
u32 total, offset;
u16 data;
- int octet, ret;
+ int octet;
+ struct ath5k_platform_data *pdata = NULL;
+
+ if (ah->ah_sc->pdev)
+ return 0;
+ }
- ret = ath5k_hw_nvram_read(ah, 0x20, &data);
- if (ret)
+ AR5K_EEPROM_READ(0x20, data);
+
--- a/drivers/net/wireless/ath/ath5k/pci.c
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -17,6 +17,7 @@
#include "../ath.h"
#include "ath5k.h"
#include "debug.h"
-@@ -73,6 +74,19 @@ bool ath5k_pci_eeprom_read(struct ath_co
+@@ -74,6 +75,19 @@ ath5k_pci_eeprom_read(struct ath_common
{
struct ath5k_hw *ah = (struct ath5k_hw *) common->ah;
u32 status, timeout;
/* Antenna diversity/combining */
#define ATH_ANT_RX_CURRENT_SHIFT 4
-@@ -611,15 +605,11 @@ struct ath_softc {
+@@ -625,15 +619,11 @@ struct ath_softc {
struct ath_beacon beacon;
struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
/* Rfkill */
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -1270,9 +1270,6 @@ static void ath9k_stop(struct ieee80211_
+@@ -1281,9 +1281,6 @@ static void ath9k_stop(struct ieee80211_
aphy->state = ATH_WIPHY_INACTIVE;
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1425,8 +1425,8 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -1426,8 +1426,8 @@ int ath9k_hw_reset(struct ath_hw *ah, st
REG_WRITE(ah, AR_OBS, 8);
if (ah->config.rx_intr_mitigation) {
+++ /dev/null
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -169,7 +169,7 @@ static void ath_tx_flush_tid(struct ath_
- ath_tx_update_baw(sc, tid, fi->seqno);
- ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0, 0);
- } else {
-- ath_tx_send_normal(sc, txq, tid, &bf_head);
-+ ath_tx_send_normal(sc, txq, NULL, &bf_head);
- }
- spin_lock_bh(&txq->axq_lock);
- }
+++ /dev/null
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -856,7 +856,7 @@ int ath_tx_aggr_start(struct ath_softc *
-
- txtid->state |= AGGR_ADDBA_PROGRESS;
- txtid->paused = true;
-- *ssn = txtid->seq_start;
-+ *ssn = txtid->seq_start = txtid->seq_next;
-
- return 0;
- }
+++ /dev/null
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -858,6 +858,9 @@ int ath_tx_aggr_start(struct ath_softc *
- txtid->paused = true;
- *ssn = txtid->seq_start = txtid->seq_next;
-
-+ memset(txtid->tx_buf, 0, sizeof(txtid->tx_buf));
-+ txtid->baw_head = txtid->baw_tail = 0;
-+
- return 0;
- }
-
+++ /dev/null
-
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -251,6 +251,9 @@ int ath_set_channel(struct ath_softc *sc
- if (!ath_stoprecv(sc))
- stopped = false;
-
-+ if (!ath9k_hw_check_alive(ah))
-+ stopped = false;
-+
- /* XXX: do not flush receive queue here. We don't want
- * to flush data frames already in queue because of
- * changing channel. */
-@@ -602,7 +605,15 @@ void ath9k_tasklet(unsigned long data)
-
- spin_lock(&sc->sc_pcu_lock);
-
-- if (!ath9k_hw_check_alive(ah))
-+ /*
-+ * Only run the baseband hang check if beacons stop working in AP or
-+ * IBSS mode, because it has a high false positive rate. For station
-+ * mode it should not be necessary, since the upper layers will detect
-+ * this through a beacon miss automatically and the following channel
-+ * change will trigger a hardware reset anyway
-+ */
-+ if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0 &&
-+ !ath9k_hw_check_alive(ah))
- ieee80211_queue_work(sc->hw, &sc->hw_check_work);
-
- if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
+++ /dev/null
---- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
-@@ -615,7 +615,7 @@ int ath9k_hw_process_rxdesc_edma(struct
- */
- if (rxsp->status11 & AR_CRCErr)
- rxs->rs_status |= ATH9K_RXERR_CRC;
-- if (rxsp->status11 & AR_PHYErr) {
-+ else if (rxsp->status11 & AR_PHYErr) {
- phyerr = MS(rxsp->status11, AR_PHYErrCode);
- /*
- * If we reach a point here where AR_PostDelimCRCErr is
-@@ -638,11 +638,11 @@ int ath9k_hw_process_rxdesc_edma(struct
- rxs->rs_phyerr = phyerr;
- }
-
-- }
-- if (rxsp->status11 & AR_DecryptCRCErr)
-+ } else if (rxsp->status11 & AR_DecryptCRCErr)
- rxs->rs_status |= ATH9K_RXERR_DECRYPT;
-- if (rxsp->status11 & AR_MichaelErr)
-+ else if (rxsp->status11 & AR_MichaelErr)
- rxs->rs_status |= ATH9K_RXERR_MIC;
-+
- if (rxsp->status11 & AR_KeyMiss)
- rxs->rs_status |= ATH9K_RXERR_DECRYPT;
- }
---- a/drivers/net/wireless/ath/ath9k/mac.c
-+++ b/drivers/net/wireless/ath/ath9k/mac.c
-@@ -690,17 +690,23 @@ int ath9k_hw_rxprocdesc(struct ath_hw *a
- rs->rs_flags |= ATH9K_RX_DECRYPT_BUSY;
-
- if ((ads.ds_rxstatus8 & AR_RxFrameOK) == 0) {
-+ /*
-+ * Treat these errors as mutually exclusive to avoid spurious
-+ * extra error reports from the hardware. If a CRC error is
-+ * reported, then decryption and MIC errors are irrelevant,
-+ * the frame is going to be dropped either way
-+ */
- if (ads.ds_rxstatus8 & AR_CRCErr)
- rs->rs_status |= ATH9K_RXERR_CRC;
-- if (ads.ds_rxstatus8 & AR_PHYErr) {
-+ else if (ads.ds_rxstatus8 & AR_PHYErr) {
- rs->rs_status |= ATH9K_RXERR_PHY;
- phyerr = MS(ads.ds_rxstatus8, AR_PHYErrCode);
- rs->rs_phyerr = phyerr;
-- }
-- if (ads.ds_rxstatus8 & AR_DecryptCRCErr)
-+ } else if (ads.ds_rxstatus8 & AR_DecryptCRCErr)
- rs->rs_status |= ATH9K_RXERR_DECRYPT;
-- if (ads.ds_rxstatus8 & AR_MichaelErr)
-+ else if (ads.ds_rxstatus8 & AR_MichaelErr)
- rs->rs_status |= ATH9K_RXERR_MIC;
-+
- if (ads.ds_rxstatus8 & AR_KeyMiss)
- rs->rs_status |= ATH9K_RXERR_DECRYPT;
- }
+++ /dev/null
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -1224,12 +1224,14 @@ void ath_tx_cleanupq(struct ath_softc *s
- void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq)
- {
- struct ath_atx_ac *ac;
-- struct ath_atx_tid *tid;
-+ struct ath_atx_tid *tid, *last;
-
-- if (list_empty(&txq->axq_acq))
-+ if (list_empty(&txq->axq_acq) ||
-+ txq->axq_ampdu_depth >= ATH_AGGR_MIN_QDEPTH)
- return;
-
- ac = list_first_entry(&txq->axq_acq, struct ath_atx_ac, list);
-+ last = list_entry(ac->tid_q.prev, struct ath_atx_tid, list);
- list_del(&ac->list);
- ac->sched = false;
-
-@@ -1253,7 +1255,8 @@ void ath_txq_schedule(struct ath_softc *
- if (!list_empty(&tid->buf_q))
- ath_tx_queue_tid(txq, tid);
-
-- break;
-+ if (tid == last || txq->axq_ampdu_depth >= ATH_AGGR_MIN_QDEPTH)
-+ break;
- } while (!list_empty(&ac->tid_q));
-
- if (!list_empty(&ac->tid_q)) {
+++ /dev/null
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -429,7 +429,7 @@ static void ath_tx_complete_aggr(struct
-
- ath_tx_count_frames(sc, bf, ts, txok, &nframes, &nbad);
- while (bf) {
-- txfail = txpending = 0;
-+ txfail = txpending = sendbar = 0;
- bf_next = bf->bf_next;
-
- skb = bf->bf_mpdu;
+++ /dev/null
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -1556,17 +1556,36 @@ __ieee80211_data_to_8023(struct ieee8021
- {
- struct ieee80211_sub_if_data *sdata = rx->sdata;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
-+ bool check_port_control = false;
-+ struct ethhdr *ehdr;
-+ int ret;
-
- if (ieee80211_has_a4(hdr->frame_control) &&
- sdata->vif.type == NL80211_IFTYPE_AP_VLAN && !sdata->u.vlan.sta)
- return -1;
-
-+ if (sdata->vif.type == NL80211_IFTYPE_STATION &&
-+ !!sdata->u.mgd.use_4addr != !!ieee80211_has_a4(hdr->frame_control)) {
-+
-+ if (!sdata->u.mgd.use_4addr)
-+ return -1;
-+ else
-+ check_port_control = true;
-+ }
-+
- if (is_multicast_ether_addr(hdr->addr1) &&
-- ((sdata->vif.type == NL80211_IFTYPE_AP_VLAN && sdata->u.vlan.sta) ||
-- (sdata->vif.type == NL80211_IFTYPE_STATION && sdata->u.mgd.use_4addr)))
-+ sdata->vif.type == NL80211_IFTYPE_AP_VLAN && sdata->u.vlan.sta)
-+ return -1;
-+
-+ ret = ieee80211_data_to_8023(rx->skb, sdata->vif.addr, sdata->vif.type);
-+ if (ret < 0 || !check_port_control)
-+ return ret;
-+
-+ ehdr = (struct ethhdr *) rx->skb->data;
-+ if (ehdr->h_proto != rx->sdata->control_port_protocol)
- return -1;
-
-- return ieee80211_data_to_8023(rx->skb, sdata->vif.addr, sdata->vif.type);
-+ return 0;
- }
-
- /*
+++ /dev/null
-From 27ed5ec6924c17b76d65b697a162bafee7bd8e4e Mon Sep 17 00:00:00 2001
-From: Helmut Schaa <helmut.schaa@googlemail.com>
-Date: Mon, 21 Jun 2010 10:03:05 +0200
-Subject: [PATCH] rt2x00: fix rt2800pci hang on ifdown
-
-rt2800pci hangs the system on rt305x SoC devices on ifdown. Work around
-this issue by disabling TX DMA prior to resetting the TX queue indices.
-
-This patch is not suitable for upstream inclusion but is just meant as
-a workaround until a proper solution is implemented.
-
-Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
----
- drivers/net/wireless/rt2x00/rt2800pci.c | 4 ++++
- 1 files changed, 4 insertions(+), 0 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -481,6 +481,10 @@ static void rt2800pci_disable_radio(stru
-
- rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280);
-
-+ rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®);
-+ rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-+ rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-+
- rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®);
- rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1);
- rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1);
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
-@@ -4056,6 +4056,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
+@@ -4482,6 +4482,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
MODULE_FIRMWARE(MWL8K_8366_AP_FW(MWL8K_8366_AP_FW_API));
static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = {
projects / 15.05 / openwrt.git / commitdiff