--- Copyright 2016 Openwrt.org
+-- Copyright 2016 Hannu Nyman
-- Licensed to the public under the Apache License 2.0.
m = Map("adblock", translate("Adblock"),
o3.rmempty = false
o3.datatype = "file"
-fdns = s:option(Flag, "adb_forcedns", translate("Redirect all DNS queries to the local resolver"),
- translate("When adblock is active, all DNS queries are redirected to the local resolver " ..
- "in this server by default. You can disable that to allow queries to external DNS servers."))
-fdns.rmempty = false
-fdns.default = fdns.enabled
-
--- Statistics
-
-t = m:section(NamedSection, "global", "adblock", translate("Statistics"))
-
-dat = t:option(DummyValue, "adb_lastrun", translate("Last update of the blocklists"))
-tot = t:option(DummyValue, "adb_overall_count", translate("Total count of blocked domains"))
-prc = t:option(DummyValue, "adb_percentage", translate("Percentage of blocked packets (before last update, IPv4/IPv6)"))
-
-- Blocklist options
bl = m:section(TypedSection, "source", translate("Blocklist sources"),
name.rmempty = false
des = bl:option(DummyValue, "adb_src_desc", translate("Description"))
-cou = bl:option(DummyValue, "adb_src_count", translate("Count"))
-upd = bl:option(DummyValue, "adb_src_timestamp", translate("List date/state"))
-- Additional options
-s2 = m:section(NamedSection, "backup", "service", translate("Backup options"))
+s2 = m:section(NamedSection, "global", "adblock", translate("Backup options"))
-o4 = s2:option(Flag, "enabled", translate("Enable blocklist backup"))
+o4 = s2:option(Flag, "adb_backup", translate("Enable blocklist backup"))
o4.rmempty = false
o4.default = 0
-o5 = s2:option(Value, "adb_dir", translate("Backup directory"))
+o5 = s2:option(Value, "adb_backupdir", translate("Backup directory"))
o5.rmempty = false
o5.datatype = "directory"
e = m:section(NamedSection, "global", "adblock", translate("Extra options"),
translate("Options for further tweaking in case the defaults are not suitable for you."))
-a0 = e:option(Flag, "adb_restricted", translate("Do not write status info to flash"),
- translate("Skip writing update status information to the config file. Status fields on this page will not be updated."))
-a0.default = 0
-
-a1 = e:option(Value, "adb_nullport", translate("Port of the adblock uhttpd instance"))
-a1.optional = true
-a1.default = 65534
-a1.datatype = "port"
-
-a5 = e:option(Value, "adb_nullportssl", translate("Port of the adblock uhttpd instance for https links"))
-a5.optional = true
-a5.default = 65535
-a5.datatype = "port"
-
-a2 = e:option(Value, "adb_nullipv4", translate("IPv4 blackhole ip address"))
-a2.optional = true
-a2.default = "198.18.0.1"
-a2.datatype = "ip4addr"
-
-a3 = e:option(Value, "adb_nullipv6", translate("IPv6 blackhole ip address"))
-a3.optional = true
-a3.default = "::ffff:c612:0001"
-a3.datatype = "ip6addr"
-
-a4 = e:option(Value, "adb_fetchttl", translate("Timeout for blocklist fetch (seconds)"))
-a4.optional = true
-a4.default = 5
-a4.datatype = "range(2,60)"
-
-a7 = e:option(Value, "adb_lanif", translate("Name of the logical lan interface"))
-a7.optional = true
-a7.default = "lan"
-a7.datatype = "network"
+a = e:option(Flag, "adb_debug", translate("Enable verbose debug logging"))
+a.default = a.disabled
+a.rmempty = false
+
+a = e:option(Value, "adb_iface", translate("Restrict reload trigger to certain interface(s)"),
+ translate("Space separated list of wan interfaces that trigger reload action. " ..
+ "To disable reload trigger set it to 'false'. Default: empty"))
+a.datatype = "network"
+a.rmempty = true
return m
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.12\n"
+"Language: ja\n"
+
+msgid ""
+"). Note that list URLs and Shallalist category selections are not "
+"configurable via Luci."
+msgstr ""
+"）。これらのリストのURLおよびshallaリストの選択済みカテゴリーは、Luciを通して"
+"設定することができません。"
+
+msgid "Adblock"
+msgstr "Adblock"
+
+msgid "Available blocklist sources ("
+msgstr "利用可能なブロックリスト提供元です（"
+
+msgid "Backup directory"
+msgstr "バックアップ先 ディレクトリ"
+
+msgid "Backup options"
+msgstr "バックアップ オプション"
+
+msgid "Blocklist sources"
+msgstr "ブロックリスト提供元"
+
+msgid ""
+"Configuration of the adblock package to block ad/abuse domains by using DNS."
+msgstr ""
+"DNSの利用によって広告/不正ドメインをブロックする、adblock パッケージの設定で"
+"す。"
+
+msgid "Description"
+msgstr "説明"
+
+msgid "Enable adblock"
+msgstr "adblockの有効化"
+
+msgid "Enable blocklist backup"
+msgstr "ブロックリスト バックアップの有効化"
+
+msgid "Enable verbose debug logging"
+msgstr "詳細なデバッグ ログの有効化"
+
+msgid "Enabled"
+msgstr "有効"
+
+msgid "Extra options"
+msgstr "拡張設定"
+
+msgid ""
+"File with whitelisted hosts/domains that are allowed despite being on a "
+"blocklist."
+msgstr ""
+"ホワイトリスト ファイル内のホスト/ドメインは、ブロックリストの登録に関わらず"
+"許可されます。"
+
+msgid "Global options"
+msgstr "一般設定"
+
+msgid ""
+"Options for further tweaking in case the defaults are not suitable for you."
+msgstr "デフォルト設定が適切でない場合、追加で設定するためのオプションです。"
+
+msgid "Restrict reload trigger to certain interface(s)"
+msgstr "リロードトリガを特定のインターフェースに限定する"
+
+msgid ""
+"Space separated list of wan interfaces that trigger reload action. To "
+"disable reload trigger set it to 'false'. Default: empty"
+msgstr ""
+"リロード実行のトリガとなる、スペースで区切られたWANインターフェースのリストで"
+"す。リロードトリガを無効にするには、 false を設定します。デフォルト:（空）"
+
+msgid "Whitelist file"
+msgstr "ホワイトリスト ファイル"
+
+msgid "see list details"
+msgstr "リストの詳細を見る"
+
+#~ msgid "Count"
+#~ msgstr "カウント"
+
+#~ msgid "Do not write status info to flash"
+#~ msgstr "ステータス情報をフラッシュに書き込まない"
+
+#~ msgid "Last update of the blocklists"
+#~ msgstr "ブロックリストの最終更新日時"
+
+#~ msgid "List date/state"
+#~ msgstr "リスト日時/状態"
+
+#~ msgid "Name of the logical lan interface"
+#~ msgstr "論理LANインターフェース名"
+
+#~ msgid "Percentage of blocked packets (before last update, IPv4/IPv6)"
+#~ msgstr "ブロック済みパケットの割合（最終更新以前、IPv4/IPv6）"
+
+#~ msgid "Port of the adblock uhttpd instance"
+#~ msgstr "adblock uhttpdインスタンスのポート"
+
+#~ msgid "Port of the adblock uhttpd instance for https links"
+#~ msgstr "httpsリンク用adblock uhttpdインスタンスのポート"
+
+#~ msgid "Redirect all DNS queries to the local resolver"
+#~ msgstr "全てのDNSクエリをローカルリゾルバにリダイレクト"
+
+#~ msgid ""
+#~ "Skip writing update status information to the config file. Status fields "
+#~ "on this page will not be updated."
+#~ msgstr ""
+#~ "更新ステータス情報をコンフィグファイルに書き込まず、スキップします。この"
+#~ "ページのステータス画面は更新されなくなります。"
+
+#~ msgid "Statistics"
+#~ msgstr "ステータス"
+
+#~ msgid "Timeout for blocklist fetch (seconds)"
+#~ msgstr "ブロックリスト取得の制限時間（秒）"
+
+#~ msgid "Total count of blocked domains"
+#~ msgstr "ブロック済みドメインの合計"
+
+#~ msgid ""
+#~ "When adblock is active, all DNS queries are redirected to the local "
+#~ "resolver in this server by default. You can disable that to allow queries "
+#~ "to external DNS servers."
+#~ msgstr ""
+#~ "adblockがアクティブである時、全てのDNSクエリは既定でこのサーバー上のリゾル"
+#~ "バにリダイレクトされます。外部DNSサーバーへのクエリを許可する場合、この設"
+#~ "定を無効にすることもできます。"
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Language: pt_BR\n"
+
+msgid ""
+"). Note that list URLs and Shallalist category selections are not "
+"configurable via Luci."
+msgstr ""
+"). Note que a lista de URL e as seleções de categoria da Shallalist não são "
+"configuráveis pelo Luci."
+
+msgid "Adblock"
+msgstr "Adblock"
+
+msgid "Available blocklist sources ("
+msgstr "Fontes de listas de bloqueio disponíveis ("
+
+msgid "Backup directory"
+msgstr "Diretório da cópia de segurança"
+
+msgid "Backup options"
+msgstr "Opções da cópia de segurança"
+
+msgid "Blocklist sources"
+msgstr "Fontes de listas de bloqueio"
+
+msgid ""
+"Configuration of the adblock package to block ad/abuse domains by using DNS."
+msgstr ""
+"Configuração do pacote adblock para bloquear, usando o DNS, domínios que "
+"distribuem propagandas abusivas."
+
+msgid "Description"
+msgstr "Descrição"
+
+msgid "Enable adblock"
+msgstr "Habilitar adblock"
+
+msgid "Enable blocklist backup"
+msgstr "Habilitar cópia de segurança da lista de bloqueio"
+
+msgid "Enable verbose debug logging"
+msgstr "Habilite registros detalhados para depuração"
+
+msgid "Enabled"
+msgstr "Habilitado"
+
+msgid "Extra options"
+msgstr "Opções adicionais"
+
+msgid ""
+"File with whitelisted hosts/domains that are allowed despite being on a "
+"blocklist."
+msgstr ""
+"Arquivo com a lista branca dos equipamentos/domínios que serão autorizados "
+"mesmo estando na lista de bloqueio."
+
+msgid "Global options"
+msgstr "Opções Globais"
+
+msgid ""
+"Options for further tweaking in case the defaults are not suitable for you."
+msgstr ""
+"Opções para aprimoramentos adicionais caso as opções padrão não sejam "
+"suficientes para você."
+
+msgid "Restrict reload trigger to certain interface(s)"
+msgstr "Restringir o gatilho de recarga para somente alguma(s) interface(s)"
+
+msgid ""
+"Space separated list of wan interfaces that trigger reload action. To "
+"disable reload trigger set it to 'false'. Default: empty"
+msgstr ""
+"Lista das interfaces WAN, separadas por espaço, que podem disparar uma ação "
+"de recarga. Para desabilitar este gatilho, defina-o como 'false'. Padrão: em "
+"branco"
+
+msgid "Whitelist file"
+msgstr "Arquivo da lista branca"
+
+msgid "see list details"
+msgstr "veja os detalhes da lista"
"Konfiguration av paket adblock för att blockera annons/otillåtna domäner "
"genom att användning DNS."
-msgid "Count"
-msgstr "Räkna"
-
msgid "Description"
msgstr "Beskrivning"
-msgid "Do not write status info to flash"
-msgstr "Skriv inte status info till flash"
-
msgid "Enable adblock"
msgstr "Aktivera abblock"
msgid "Enable blocklist backup"
msgstr "Aktivera säkerhetskopiering av blockeringslistan"
+msgid "Enable verbose debug logging"
+msgstr ""
+
msgid "Enabled"
msgstr "Aktiverad"
msgid "Global options"
msgstr "Globala alternativ"
-msgid "IPv4 blackhole ip address"
-msgstr ""
-
-msgid "IPv6 blackhole ip address"
-msgstr ""
-
-msgid "Last update of the blocklists"
-msgstr ""
-
-msgid "List date/state"
-msgstr ""
-
-msgid "Name of the logical lan interface"
-msgstr ""
-
msgid ""
"Options for further tweaking in case the defaults are not suitable for you."
msgstr ""
-msgid "Percentage of blocked packets (before last update, IPv4/IPv6)"
-msgstr ""
-
-msgid "Port of the adblock uhttpd instance"
+msgid "Restrict reload trigger to certain interface(s)"
msgstr ""
-msgid "Port of the adblock uhttpd instance for https links"
-msgstr ""
-
-msgid "Redirect all DNS queries to the local resolver"
-msgstr "Dirigera om alla DNS-förfrågning till den lokala resolvern"
-
msgid ""
-"Skip writing update status information to the config file. Status fields on "
-"this page will not be updated."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Timeout for blocklist fetch (seconds)"
-msgstr ""
-
-msgid "Total count of blocked domains"
-msgstr ""
-
-msgid ""
-"When adblock is active, all DNS queries are redirected to the local resolver "
-"in this server by default. You can disable that to allow queries to external "
-"DNS servers."
+"Space separated list of wan interfaces that trigger reload action. To "
+"disable reload trigger set it to 'false'. Default: empty"
msgstr ""
msgid "Whitelist file"
msgid "see list details"
msgstr "se listans detaljer"
+
+#~ msgid "Count"
+#~ msgstr "Räkna"
+
+#~ msgid "Do not write status info to flash"
+#~ msgstr "Skriv inte status info till flash"
+
+#~ msgid "Redirect all DNS queries to the local resolver"
+#~ msgstr "Dirigera om alla DNS-förfrågning till den lokala resolvern"
"Configuration of the adblock package to block ad/abuse domains by using DNS."
msgstr ""
-msgid "Count"
-msgstr ""
-
msgid "Description"
msgstr ""
-msgid "Do not write status info to flash"
-msgstr ""
-
msgid "Enable adblock"
msgstr ""
msgid "Enable blocklist backup"
msgstr ""
+msgid "Enable verbose debug logging"
+msgstr ""
+
msgid "Enabled"
msgstr ""
msgid "Global options"
msgstr ""
-msgid "IPv4 blackhole ip address"
-msgstr ""
-
-msgid "IPv6 blackhole ip address"
-msgstr ""
-
-msgid "Last update of the blocklists"
-msgstr ""
-
-msgid "List date/state"
-msgstr ""
-
-msgid "Name of the logical lan interface"
-msgstr ""
-
msgid ""
"Options for further tweaking in case the defaults are not suitable for you."
msgstr ""
-msgid "Percentage of blocked packets (before last update, IPv4/IPv6)"
-msgstr ""
-
-msgid "Port of the adblock uhttpd instance"
-msgstr ""
-
-msgid "Port of the adblock uhttpd instance for https links"
-msgstr ""
-
-msgid "Redirect all DNS queries to the local resolver"
-msgstr ""
-
-msgid ""
-"Skip writing update status information to the config file. Status fields on "
-"this page will not be updated."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Timeout for blocklist fetch (seconds)"
-msgstr ""
-
-msgid "Total count of blocked domains"
+msgid "Restrict reload trigger to certain interface(s)"
msgstr ""
msgid ""
-"When adblock is active, all DNS queries are redirected to the local resolver "
-"in this server by default. You can disable that to allow queries to external "
-"DNS servers."
+"Space separated list of wan interfaces that trigger reload action. To "
+"disable reload trigger set it to 'false'. Default: empty"
msgstr ""
msgid "Whitelist file"
"Configuration of the adblock package to block ad/abuse domains by using DNS."
msgstr "Adblock 配置工具，通过 DNS 来拦截广告和阻止域名。"
-msgid "Count"
-msgstr "数量"
-
msgid "Description"
msgstr "描述"
-msgid "Do not write status info to flash"
-msgstr ""
-
msgid "Enable adblock"
msgstr "启用Adblock"
msgid "Enable blocklist backup"
msgstr "启用拦截规则备份"
+msgid "Enable verbose debug logging"
+msgstr ""
+
msgid "Enabled"
msgstr "启用"
msgid "Global options"
msgstr "全局选项"
-msgid "IPv4 blackhole ip address"
-msgstr "IPv4禁止列表"
-
-msgid "IPv6 blackhole ip address"
-msgstr "IPv6禁止列表"
-
-msgid "Last update of the blocklists"
-msgstr ""
-
-msgid "List date/state"
-msgstr "列表日期/状态"
-
-msgid "Name of the logical lan interface"
-msgstr "LAN接口名称"
-
msgid ""
"Options for further tweaking in case the defaults are not suitable for you."
msgstr "在默认设置并不适合你时的额外选项。"
-msgid "Percentage of blocked packets (before last update, IPv4/IPv6)"
+msgid "Restrict reload trigger to certain interface(s)"
msgstr ""
-msgid "Port of the adblock uhttpd instance"
-msgstr "Adblock uhttpd端口"
-
-msgid "Port of the adblock uhttpd instance for https links"
+msgid ""
+"Space separated list of wan interfaces that trigger reload action. To "
+"disable reload trigger set it to 'false'. Default: empty"
msgstr ""
-msgid "Redirect all DNS queries to the local resolver"
-msgstr "将所有DNS查询都重定向到本地解析器"
+msgid "Whitelist file"
+msgstr "白名单文件"
+
+msgid "see list details"
+msgstr "查看列表详情"
-msgid ""
-"Skip writing update status information to the config file. Status fields on "
-"this page will not be updated."
-msgstr ""
+#~ msgid "Count"
+#~ msgstr "数量"
-msgid "Statistics"
-msgstr ""
+#~ msgid "IPv4 blackhole ip address"
+#~ msgstr "IPv4禁止列表"
-msgid "Timeout for blocklist fetch (seconds)"
-msgstr "列表查询超时时间（秒）"
+#~ msgid "IPv6 blackhole ip address"
+#~ msgstr "IPv6禁止列表"
-msgid "Total count of blocked domains"
-msgstr "阻止域名总数"
+#~ msgid "List date/state"
+#~ msgstr "列表日期/状态"
-msgid ""
-"When adblock is active, all DNS queries are redirected to the local resolver "
-"in this server by default. You can disable that to allow queries to external "
-"DNS servers."
-msgstr ""
-"当Adblock处于活动状态时，默认情况下会将所有的DNS查询重定向到此服务器的本地解"
-"析器。您可以禁用以允许查询外部DNS服务器。"
+#~ msgid "Name of the logical lan interface"
+#~ msgstr "LAN接口名称"
-msgid "Whitelist file"
-msgstr "白名单文件"
+#~ msgid "Port of the adblock uhttpd instance"
+#~ msgstr "Adblock uhttpd端口"
-msgid "see list details"
-msgstr "查看列表详情"
+#~ msgid "Redirect all DNS queries to the local resolver"
+#~ msgstr "将所有DNS查询都重定向到本地解析器"
+
+#~ msgid "Timeout for blocklist fetch (seconds)"
+#~ msgstr "列表查询超时时间（秒）"
+
+#~ msgid "Total count of blocked domains"
+#~ msgstr "阻止域名总数"
+
+#~ msgid ""
+#~ "When adblock is active, all DNS queries are redirected to the local "
+#~ "resolver in this server by default. You can disable that to allow queries "
+#~ "to external DNS servers."
+#~ msgstr ""
+#~ "当Adblock处于活动状态时，默认情况下会将所有的DNS查询重定向到此服务器的本地"
+#~ "解析器。您可以禁用以允许查询外部DNS服务器。"
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2014-03-29 23:07+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
+"Project-Id-Version: \n"
+"PO-Revision-Date: 2017-02-17 17:07-0200\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
"Language-Team: none\n"
"Language: pt_BR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
+"POT-Creation-Date: \n"
msgid "AHCP Server"
msgstr "Servidor AHCP"
-#, fuzzy
msgid ""
"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
"networks designed to be used in place of router discovery or DHCP on "
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Language: pt_BR\n"
+
+msgid "\"Falloc\" is not available in all cases."
+msgstr "\"Falloc\" não está disponível em todas as classes."
+
+msgid "<abbr title=\"Distributed Hash Table\">DHT</abbr> enabled"
+msgstr ""
+"<abbr title=\"Distributed Hash Table/Tabla de disperção distribuída\">DHT</"
+"abbr> habilitado"
+
+msgid "<abbr title=\"Local Peer Discovery\">LPD</abbr> enabled"
+msgstr ""
+"<abbr title=\"Local Peer Discovery/Descoberta de Parceiros Locais\">LPD</"
+"abbr> habilitado"
+
+msgid "Additional Bt tracker enabled"
+msgstr "Rastreadores BitTorrent adicionais habilitado"
+
+msgid "Aria2"
+msgstr "Aria2"
+
+msgid "Aria2 Settings"
+msgstr "Configurações do Aria2"
+
+msgid "Aria2 Status"
+msgstr "Estado do Aria2"
+
+msgid ""
+"Aria2 is a multi-protocol & multi-source download utility, here you can "
+"configure the settings."
+msgstr ""
+"Aria2 é um utilitário de transferência multi-protocolo de múltiplas fontes, "
+"aqui você pode configurá-lo."
+
+msgid "Autosave session interval"
+msgstr "Intervalo para autossalvamento da sessão"
+
+msgid "BitTorrent Settings"
+msgstr "Configurações do BitTorrent"
+
+msgid "BitTorrent listen port"
+msgstr "Porta de escuta do BitTorrent"
+
+msgid "Collecting data..."
+msgstr "Coletando dados..."
+
+msgid "Config file directory"
+msgstr "Diretório dos arquivos de configuração"
+
+msgid "Debug"
+msgstr "Depuração"
+
+msgid "Default download directory"
+msgstr "Diretório padrão de arquivos baixados"
+
+msgid "Disk cache"
+msgstr "Cache em Disco"
+
+msgid "Enable log"
+msgstr "Habilitar registros"
+
+msgid "Enabled"
+msgstr "Habilitado"
+
+msgid "Error"
+msgstr "Erro"
+
+msgid "Extra Settings"
+msgstr "Configurações Adicionais"
+
+msgid "Falloc"
+msgstr "Falloc"
+
+msgid "Files and Locations"
+msgstr "Arquivos e Locais"
+
+msgid "Follow torrent"
+msgstr "Seguir torrent"
+
+msgid "General Settings"
+msgstr "Configurações Gerais"
+
+msgid "Generate Randomly"
+msgstr "Gerar aleatoriamente"
+
+msgid "Info"
+msgstr "Informações"
+
+msgid "List of additional Bt tracker"
+msgstr "Lista de rastreadores BitTorrent adicionais"
+
+msgid "List of extra settings"
+msgstr "Lista de configurações adicionais"
+
+msgid "Log file is in the config file dir."
+msgstr ""
+"Arquivo de registro (log) está no diretório do arquivo de configuração."
+
+msgid "Log level"
+msgstr "Nível do registro"
+
+msgid "Max concurrent downloads"
+msgstr "Número máximo de transferencias simultâneas"
+
+msgid "Max connection per server"
+msgstr "Numero máximo de conexões por servidor"
+
+msgid "Max number of peers per torrent"
+msgstr "Numero máximo de parceiros por torrent"
+
+msgid "Max number of split"
+msgstr "Numero máximo de divisões"
+
+msgid "Min split size"
+msgstr "Tamanho mínimo da divisão"
+
+msgid "No Authentication"
+msgstr "Sem Autenticação"
+
+msgid "Notice"
+msgstr "Aviso"
+
+msgid "Off"
+msgstr "Desligado"
+
+msgid "Open WebUI-Aria2"
+msgstr "Abrir WebUI-Aria2"
+
+msgid "Open YAAW"
+msgstr "Abrir YAAW"
+
+msgid "Overall download limit"
+msgstr "Limite global para baixar"
+
+msgid "Overall speed limit enabled"
+msgstr "Limite da taxa de transferência global habilitado"
+
+msgid "Overall upload limit"
+msgstr "Limite global para subir"
+
+msgid "Per task download limit"
+msgstr "Limite por tarefa para baixar"
+
+msgid "Per task speed limit enabled"
+msgstr "Limite da taxa de transferência por tarefa habilitado"
+
+msgid "Per task upload limit"
+msgstr "Limite por tarefa para subir"
+
+msgid "Prealloc"
+msgstr "Pré-alocação"
+
+msgid "Preallocation"
+msgstr "Pré-alocação"
+
+msgid "Prefix of peer ID"
+msgstr "Prefixo da identificação do paceiro"
+
+msgid "RPC Token"
+msgstr ""
+"Chave eletrônica do <abbr title=\"Remote Procedure Call/Chamada de "
+"Procedimento Remoto\">RPC</abbr>"
+
+msgid "RPC authentication method"
+msgstr ""
+"Método de autenticação do <abbr title=\"Remote Procedure Call/Chamada de "
+"Procedimento Remoto\">RPC</abbr>"
+
+msgid "RPC password"
+msgstr ""
+"Senha do <abbr title=\"Remote Procedure Call/Chamada de Procedimento Remoto"
+"\">RPC</abbr>"
+
+msgid "RPC port"
+msgstr ""
+"Porta do <abbr title=\"Remote Procedure Call/Chamada de Procedimento Remoto"
+"\">RPC</abbr>"
+
+msgid "RPC username"
+msgstr ""
+"Nome do usuario do <abbr title=\"Remote Procedure Call/Chamada de "
+"Procedimento Remoto\">RPC</abbr>"
+
+msgid "Run daemon as user"
+msgstr "Executar serviço como usuário"
+
+msgid "Sec"
+msgstr "Segurança"
+
+msgid "Task Settings"
+msgstr "Configurações das tarefas"
+
+msgid "The Aria2 service is not running."
+msgstr "O serviço Aria2 está parado."
+
+msgid "The Aria2 service is running."
+msgstr "O serviço Aria2 está em execução."
+
+msgid "Token"
+msgstr "Chave eletrônica"
+
+msgid "Trunc"
+msgstr "Truncar"
+
+msgid "Use WebSocket"
+msgstr "Use WebSockets"
+
+msgid "User agent value"
+msgstr "Valor da identificação do agente do usuário"
+
+msgid "Username & Password"
+msgstr "Usuário & Senha"
+
+msgid "View Json-RPC URL"
+msgstr "Visualizar URL do JSON-RPC"
+
+msgid "Warn"
+msgstr "Atenção"
+
+msgid "in bytes, You can append K or M."
+msgstr "em bytes. Você pode sufixar com K (quilo) ou M (mega)."
+
+msgid "in bytes/sec, You can append K or M."
+msgstr "em bytes por segundo. Você pode sufixar com K (quilo) ou M (mega)."
--- /dev/null
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+LUCI_TITLE:=BCP38 LuCI interface
+LUCI_DEPENDS:=+luci-mod-admin-full +bcp38
+
+PKG_MAINTAINER:=Toke Høiland-Jørgensen <toke@toke.dk>
+PKG_LICENSE:=Apache-2.0
+
+include ../../luci.mk
+
+# call BuildPackage - OpenWrt buildroot signature
--- /dev/null
+module("luci.controller.bcp38", package.seeall)
+
+function index()
+ entry({"admin", "network", "firewall", "bcp38"},
+ cbi("bcp38"),
+ _("BCP38"), 50).dependent = false
+end
--- /dev/null
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright 2014 Toke Høiland-Jørgensen <toke@toke.dk>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+$Id$
+]]--
+
+local wa = require "luci.tools.webadmin"
+local net = require "luci.model.network".init()
+local ifaces = net:get_interfaces()
+
+m = Map("bcp38", translate("BCP38"),
+ translate("This function blocks packets with private address destinations " ..
+ "from going out onto the internet as per " ..
+ "<a href=\"http://tools.ietf.org/html/bcp38\">BCP 38</a>. " ..
+ "For IPv6, only source specific default routes are installed, so " ..
+ "no BCP38 firewall routes are needed."))
+
+s = m:section(TypedSection, "bcp38", translate("BCP38 config"))
+s.anonymous = true
+-- BASIC
+e = s:option(Flag, "enabled", translate("Enable"))
+e.rmempty = false
+
+a = s:option(Flag, "detect_upstream", translate("Auto-detect upstream IP"),
+ translate("Attempt to automatically detect if the upstream IP " ..
+ "will be blocked by the configuration, and add an exception if it will. " ..
+ "If this does not work correctly, you can add exceptions manually below."))
+a.rmempty = false
+
+n = s:option(ListValue, "interface", translate("Interface name"), translate("Interface to apply the blocking to " ..
+ "(should be the upstream WAN interface)."))
+for _, iface in ipairs(ifaces) do
+ if iface:is_up() then
+ n:value(iface:name())
+ end
+end
+n.rmempty = false
+
+ma = s:option(DynamicList, "match",
+ translate("Blocked IP ranges"))
+
+ma.datatype = "ip4addr"
+
+nm = s:option(DynamicList, "nomatch",
+ translate("Allowed IP ranges"), translate("Takes precedence over blocked ranges. "..
+ "Use to whitelist your upstream network if you're behind a double NAT " ..
+ "and the auto-detection doesn't work."))
+
+nm.datatype = "ip4addr"
+
+
+return m
--- /dev/null
+#!/bin/sh
+
+uci -q batch <<-EOF >/dev/null
+ delete ucitrack.@bcp38[-1]
+ add ucitrack bcp38
+ add_list ucitrack.@bcp38[0].affects=firewall
+ commit ucitrack
+EOF
+
+rm -f /tmp/luci-indexcache
+exit 0
--- /dev/null
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+LUCI_TITLE:=ClamAV LuCI interface
+LUCI_DEPENDS:=+luci-mod-admin-full +clamav
+
+PKG_MAINTAINER:=Marko Ratkaj <marko.ratkaj@sartura.hr>
+PKG_LICENSE:=Apache-2.0
+
+include ../../luci.mk
+
+# call BuildPackage - OpenWrt buildroot signature
--- /dev/null
+--[[
+
+LuCI ClamAV module
+
+Copyright (C) 2015, Itus Networks, Inc.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Author: Marko Ratkaj <marko.ratkaj@sartura.hr>
+ Luka Perkov <luka.perkov@sartura.hr>
+
+]]--
+
+module("luci.controller.clamav", package.seeall)
+
+function index()
+ entry({"admin", "services", "clamav"}, cbi("clamav"), _("ClamAV"))
+end
--- /dev/null
+--[[
+
+LuCI ClamAV module
+
+Copyright (C) 2015, Itus Networks, Inc.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Author: Marko Ratkaj <marko.ratkaj@sartura.hr>
+ Luka Perkov <luka.perkov@sartura.hr>
+
+]]--
+
+local fs = require "nixio.fs"
+local sys = require "luci.sys"
+require "ubus"
+
+m = Map("clamav", translate("ClamAV"))
+m.on_after_commit = function() luci.sys.call("/etc/init.d/clamav restart") end
+
+s = m:section(TypedSection, "clamav")
+s.anonymous = true
+s.addremove = false
+
+s:tab("tab_advanced", translate("Settings"))
+s:tab("tab_logs", translate("Log"))
+
+--------------- Settings --------------
+
+LogFileMaxSize = s:taboption("tab_advanced", Value, "LogFileMaxSize", translate("Max size of log file"))
+LogFileMaxSize:value("512K", translate("512K"))
+LogFileMaxSize:value("1M", translate("1M"))
+LogFileMaxSize:value("2M", translate("2M"))
+LogFileMaxSize.default = "1M"
+
+LogTime = s:taboption("tab_advanced", ListValue, "LogTime", translate("Log time with each message"))
+LogTime:value("no", translate("No"))
+LogTime:value("yes", translate("Yes"))
+LogTime.default = "no"
+
+LogVerbose = s:taboption("tab_advanced", ListValue, "LogVerbose", translate("Enable verbose logging"))
+LogVerbose:value("no", translate("No"))
+LogVerbose:value("yes", translate("Yes"))
+LogVerbose.default = "no"
+
+ExtendedDetectionInfo = s:taboption("tab_advanced", ListValue, "ExtendedDetectionInfo", translate("Log additional infection info"))
+ExtendedDetectionInfo:value("no", translate("No"))
+ExtendedDetectionInfo:value("yes", translate("Yes"))
+ExtendedDetectionInfo.default = "no"
+
+dummy3 = s:taboption("tab_advanced", DummyValue, "")
+dummy4 = s:taboption("tab_advanced", DummyValue, "")
+
+MaxDirectoryRecursion = s:taboption("tab_advanced", Value, "MaxDirectoryRecursion", translate("Max directory scan depth"))
+MaxDirectoryRecursion:value("15", translate("15"))
+MaxDirectoryRecursion:value("20", translate("20"))
+MaxDirectoryRecursion.default = "15"
+
+FollowDirectorySymlink = s:taboption("tab_advanced", ListValue, "FollowDirectorySymlink", translate("Follow directory symlinks"))
+FollowDirectorySymlink:value("no", translate("No"))
+FollowDirectorySymlink:value("yes", translate("Yes"))
+FollowDirectorySymlink.default = "no"
+
+FollowFileSymlinks = s:taboption("tab_advanced", ListValue, "FollowFileSymlinks", translate("Follow file symlinks"))
+FollowFileSymlinks:value("no", translate("No"))
+FollowFileSymlinks:value("yes", translate("Yes"))
+FollowFileSymlinks.default = "no"
+
+DetectPUA = s:taboption("tab_advanced", ListValue, "DetectPUA", translate("Detect possibly unwanted apps"))
+DetectPUA:value("no", translate("No"))
+DetectPUA:value("yes", translate("Yes"))
+DetectPUA.default = "no"
+
+ScanPE = s:taboption("tab_advanced", ListValue, "ScanPE", translate("Scan portable executables"))
+ScanPE:value("no", translate("No"))
+ScanPE:value("yes", translate("Yes"))
+ScanPE.default = "yes"
+
+ScanELF = s:taboption("tab_advanced", ListValue, "ScanELF", translate("Scan ELF files"))
+ScanELF:value("no", translate("No"))
+ScanELF:value("yes", translate("Yes"))
+ScanELF.default = "yes"
+
+DetectBrokenExecutables = s:taboption("tab_advanced", ListValue, "DetectBrokenExecutables", translate("Detect broken executables"))
+DetectBrokenExecutables:value("no", translate("No"))
+DetectBrokenExecutables:value("yes", translate("Yes"))
+DetectBrokenExecutables.default = "no"
+
+ScanOLE2 = s:taboption("tab_advanced", ListValue, "ScanOLE2", translate("Scan MS Office and .msi files"))
+ScanOLE2:value("no", translate("No"))
+ScanOLE2:value("yes", translate("Yes"))
+ScanOLE2.default = "yes"
+
+ScanPDF = s:taboption("tab_advanced", ListValue, "ScanPDF", translate("Scan pdf files"))
+ScanPDF:value("no", translate("No"))
+ScanPDF:value("yes", translate("Yes"))
+ScanPDF.default = "yes"
+
+ScanSWF = s:taboption("tab_advanced", ListValue, "ScanSWF", translate("Scan swf files"))
+ScanSWF:value("no", translate("No"))
+ScanSWF:value("yes", translate("Yes"))
+ScanSWF.default = "yes"
+
+ScanMail = s:taboption("tab_advanced", ListValue, "ScanMail", translate("Scan emails"))
+ScanMail:value("no", translate("No"))
+ScanMail:value("yes", translate("Yes"))
+ScanMail.default = "yes"
+
+ScanPartialMessages = s:taboption("tab_advanced", ListValue, "ScanPartialMessages", translate("Scan RFC1341 messages split over many emails"))
+ScanPartialMessages:value("no", translate("No"))
+ScanPartialMessages:value("yes", translate("Yes"))
+ScanPartialMessages.default = "no"
+
+ScanArchive = s:taboption("tab_advanced", ListValue, "ScanArchive", translate("Scan archives"))
+ScanArchive:value("no", translate("No"))
+ScanArchive:value("yes", translate("Yes"))
+ScanArchive.default = "yes"
+
+ArchiveBlockEncrypted = s:taboption("tab_advanced", ListValue, "ArchiveBlockEncrypted", translate("Block encrypted archives"))
+ArchiveBlockEncrypted:value("no", translate("No"))
+ArchiveBlockEncrypted:value("yes", translate("Yes"))
+ArchiveBlockEncrypted.default = "no"
+
+dummy5 = s:taboption("tab_advanced", DummyValue, "")
+dummy6 = s:taboption("tab_advanced", DummyValue, "")
+
+StreamMinPort = s:taboption("tab_advanced", Value, "StreamMinPort", translate("Port range, lowest port"))
+StreamMinPort.datatype = "portrange"
+StreamMinPort:value("1024",translate("1024"))
+StreamMinPort.default = "1024"
+
+StreamMaxPort = s:taboption("tab_advanced", Value, "StreamMaxPort", translate("Port range, highest port"))
+StreamMaxPort.datatype = "portrange"
+StreamMaxPort:value("2048",translate("2048"))
+StreamMaxPort.default = "2048"
+
+MaxThreads = s:taboption("tab_advanced", Value, "MaxThreads", translate("Max number of threads"))
+MaxThreads.datatype = "and(uinteger,min(1))"
+MaxThreads:value("10",translate("10"))
+MaxThreads:value("20",translate("20"))
+MaxThreads.default = "10"
+
+SelfCheck = s:taboption("tab_advanced", Value, "SelfCheck", translate("Database check every N sec"))
+SelfCheck.datatype = "and(uinteger,min(1))"
+SelfCheck:value("600",translate("600"))
+SelfCheck.default = "600"
+
+MaxFileSize = s:taboption("tab_advanced", Value, "MaxFileSize", translate("Max size of scanned file"))
+MaxFileSize.datatype = "string"
+MaxFileSize:value("150M",translate("150M"))
+MaxFileSize:value("50M",translate("50M"))
+MaxFileSize.default = "150M"
+
+------------------ Log --------------------
+
+clamav_logfile = s:taboption("tab_logs", TextValue, "lines", "")
+clamav_logfile.wrap = "off"
+clamav_logfile.rows = 25
+clamav_logfile.rmempty = true
+
+function clamav_logfile.cfgvalue()
+ local uci = require "luci.model.uci".cursor_state()
+ local file = "/tmp/clamd.log"
+ if file then
+ return fs.readfile(file) or ""
+ else
+ return ""
+ end
+end
+
+function clamav_logfile.write()
+end
+
+return m
end
end
-function action_run(...)
- local fs = require "nixio.fs"
+function execute_command(callback, ...)
+ local fs = require "nixio.fs"
local argv = parse_cmdline(...)
if argv then
local outfile = os.tmpname()
local binary = not not (stdout:match("[%z\1-\8\14-\31]"))
- luci.http.prepare_content("application/json")
- luci.http.write_json({
+ callback({
+ ok = true,
command = table.concat(argv, " "),
stdout = not binary and stdout,
stderr = stderr,
binary = binary
})
else
- luci.http.status(404, "No such command")
+ callback({
+ ok = false,
+ code = 404,
+ reason = "No such command"
+ })
+ end
+end
+
+function return_json(result)
+ if result.ok then
+ luci.http.prepare_content("application/json")
+ luci.http.write_json(result)
+ else
+ luci.http.status(result.code, result.reason)
end
end
+function action_run(...)
+ execute_command(return_json, ...)
+end
+
+function return_html(result)
+ if result.ok then
+ require("luci.template")
+ luci.template.render("commands_public", {
+ exitcode = result.exitcode,
+ stdout = result.stdout,
+ stderr = result.stderr
+ })
+ else
+ luci.http.status(result.code, result.reason)
+ end
+
+end
+
function action_download(...)
local fs = require "nixio.fs"
local argv = parse_cmdline(...)
local name
if chunk:match("[%z\1-\8\14-\31]") then
luci.http.header("Content-Disposition", "attachment; filename=%s"
- % fs.basename(argv[1]):gsub("%W+", ".") .. ".bin")
+ % fs.basename(argv[1]):gsub("%W+", ".") .. ".bin")
luci.http.prepare_content("application/octet-stream")
else
luci.http.header("Content-Disposition", "attachment; filename=%s"
- % fs.basename(argv[1]):gsub("%W+", ".") .. ".txt")
+ % fs.basename(argv[1]):gsub("%W+", ".") .. ".txt")
luci.http.prepare_content("text/plain")
end
end
end
+
function action_public(cmdid, args)
+ local disp = false
+ if string.sub(cmdid, -1) == "s" then
+ disp = true
+ cmdid = string.sub(cmdid, 1, -2)
+ end
local uci = require "luci.model.uci".cursor()
if cmdid and
- uci:get("luci", cmdid) == "command" and
- uci:get("luci", cmdid, "public") == "1"
- then
- action_download(cmdid, args)
- else
- luci.http.status(403, "Access to command denied")
+ uci:get("luci", cmdid) == "command" and
+ uci:get("luci", cmdid, "public") == "1"
+ then
+ if disp then
+ execute_command(return_html, cmdid, args)
+ else
+ action_download(cmdid, args)
+ end
+ else
+ luci.http.status(403, "Access to command denied")
+ end
end
-end
if (legend && output)
{
- var link = location.protocol + '//' + location.hostname +
+ var prefix = location.protocol + '//' + location.hostname +
(location.port ? ':' + location.port : '') +
- location.pathname.split(';')[0] + 'command/' +
- id + (args ? '/' + args : '');
-
+ location.pathname.split(';')[0] + 'command/';
+ var suffix = (args ? '/' + args : '');
+
+ var link = prefix + id + suffix;
+ var link_nodownload = prefix + id + "s" + suffix;
+
legend.style.display = 'none';
output.parentNode.style.display = 'block';
output.innerHTML = String.format(
- '<div class="alert-message"><%:Access command with%> <a href="%s">%s</a></div>',
- link, link
+ '<div class="alert-message"><p><%:Download execution result%> <a href="%s">%s</a></p><p><%:Or display result%> <a href="%s">%s</a></p></div>',
+ link, link, link_nodownload, link_nodownload
);
location.hash = '#output';
--- /dev/null
+<%#
+ Copyright 2016 t123yh <t123yh@outlook.com>
+ Licensed to the public under the Apache License 2.0.
+-%>
+
+<% css = [[
+.alert-success {
+ color: #3c763d;
+ background-color: #dff0d8;
+ border-color: #d6e9c6;
+}
+
+.alert {
+ padding: 15px;
+ margin-bottom: 20px;
+ border: 1px solid transparent;
+ border-radius: 4px;
+}
+
+.alert-warning {
+ color: #8a6d3b;
+ background-color: #fcf8e3;
+ border-color: #faebcc;
+}
+]] -%>
+
+<%+header%>
+
+<% if exitcode == 0 then %>
+ <div class="alert alert-success" role="alert"> <%:Command executed successfully.%> </div>
+<% else %>
+ <div class="alert alert-warning" role="alert"> <%:Command exited with status code %> <%= exitcode %> </div>
+<% end %>
+
+<% if stdout ~= "" then %>
+ <h3><%:Standard Output%></h3>
+ <pre><%= stdout %></pre>
+<% end %>
+
+<% if stderr ~= "" then %>
+ <h3><%:Standard Error%></h3>
+ <pre><%= stderr %></pre>
+<% end %>
+
+<script>
+ <%# Display top bar on mobile devices -%>
+ document.getElementsByClassName('brand')[0].style.setProperty("display", "block", "important");
+</script>
+
+<%+footer%>
\ No newline at end of file
msgid "A short textual description of the configured command"
msgstr "Una breva descripció textual de l'ordre configurat"
-msgid "Access command with"
-msgstr "Accedeix l'ordre amb"
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "Ordre"
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr "L'ordre ha fallat"
msgid "Download"
msgstr "Baixa"
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr "L'execució de l'ordre ha fallat!"
msgid "Loading"
msgstr "Carregant"
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr "Accés públic"
msgid "Run"
msgstr "Executa"
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "Esperant que l'ordre acabi..."
+
+#~ msgid "Access command with"
+#~ msgstr "Accedeix l'ordre amb"
msgid "A short textual description of the configured command"
msgstr "Krátky popis nastaveného příkazu"
-msgid "Access command with"
-msgstr ""
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "Příkaz"
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr "Příkaz selhal"
msgid "Download"
msgstr "Stáhnout"
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr "Chyba při zpracování příkazu!"
msgid "Loading"
msgstr "Nahrávám"
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr "Veřejný přístup"
msgid "Run"
msgstr "Spustit"
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "A short textual description of the configured command"
msgstr "Kurze Beschreibung des abgespeicherten Kommandos"
-msgid "Access command with"
-msgstr "Kommando aufrufen mit"
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "Kommando"
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr "Kommando fehlgeschlagen"
msgid "Download"
msgstr "Herunterladen"
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr "Kommando konnte nicht ausgeführt werden!"
msgid "Loading"
msgstr "Lade"
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr "Öffentlicher Zugriff"
msgid "Run"
msgstr "Ausführen"
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "Warte auf die Ausführung des Kommandos..."
+
+#~ msgid "Access command with"
+#~ msgstr "Kommando aufrufen mit"
msgid "A short textual description of the configured command"
msgstr ""
-msgid "Access command with"
-msgstr ""
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr ""
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr ""
msgid "Download"
msgstr ""
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr ""
msgid "Loading"
msgstr ""
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr ""
msgid "Run"
msgstr ""
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
+"Project-Id-Version: \n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
"Language-Team: none\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language: en\n"
+"X-Generator: Poedit 1.8.11\n"
msgid "A short textual description of the configured command"
msgstr "A short textual description of the configured command"
-msgid "Access command with"
-msgstr "Access command with"
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "Command"
+msgid "Command executed successfully."
+msgstr "Command executed successfully."
+
+msgid "Command exited with status code"
+msgstr "Command exited with status code"
+
msgid "Command failed"
msgstr "Command failed"
msgid "Download"
msgstr "Download"
+msgid "Download execution result"
+msgstr "Download execution result"
+
msgid "Failed to execute command!"
msgstr "Failed to execute command!"
msgid "Loading"
msgstr "Loading"
+msgid "Or display result"
+msgstr "Or display result"
+
msgid "Public access"
msgstr "Public access"
msgid "Run"
msgstr "Run"
+msgid "Standard Error"
+msgstr "Standard Error"
+
+msgid "Standard Output"
+msgstr "Standard Output"
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "Waiting for command to complete..."
+
+#~ msgid "Command exited with status code "
+#~ msgstr "Command exited with status code "
msgid "A short textual description of the configured command"
msgstr "Descripción breve del comando a configurar"
-msgid "Access command with"
-msgstr "Acceder al comando con"
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "Comando"
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr "Falló"
msgid "Download"
msgstr "Descarga"
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr "¡Error al ejecutar el comando!"
msgid "Loading"
msgstr "Cargando"
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr "Acceso público"
msgid "Run"
msgstr "Ejecutar"
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "Esperando a que termine el comando..."
+
+#~ msgid "Access command with"
+#~ msgstr "Acceder al comando con"
msgid "A short textual description of the configured command"
msgstr "Une courte description de la commande configurée"
-msgid "Access command with"
-msgstr "Accéder à la commande par"
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "Commande"
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr "Echec de la commande"
msgid "Download"
msgstr "Télécharger"
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr "Echec de l'exécution de la commande ! "
msgid "Loading"
msgstr "Chargement"
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr "Accès public"
msgid "Run"
msgstr "Exécuter"
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "En attente de la commande pour finir..."
+
+#~ msgid "Access command with"
+#~ msgstr "Accéder à la commande par"
msgid "A short textual description of the configured command"
msgstr ""
-msgid "Access command with"
-msgstr ""
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr ""
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr ""
msgid "Download"
msgstr ""
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr ""
msgid "Loading"
msgstr ""
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr ""
msgid "Run"
msgstr ""
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "A short textual description of the configured command"
msgstr "A beállított parancs rövid szöveges leírása"
-msgid "Access command with"
-msgstr "Parancs hozzáférése"
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "Paracs"
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr "Parancs végrehajtás sikertelen"
msgid "Download"
msgstr "Letöltés"
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr "Parancs végrehajtása sikertelen!"
msgid "Loading"
msgstr "Betöltés"
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr "Nyilvános hozzáférés"
msgid "Run"
msgstr "Futtatás"
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "Várakozás a parancs befejezésére..."
+
+#~ msgid "Access command with"
+#~ msgstr "Parancs hozzáférése"
msgid "A short textual description of the configured command"
msgstr "Una breve descrizione testuale del comando configurato"
-msgid "Access command with"
-msgstr "Accesso comando con"
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "Comando"
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr "Comando fallito"
msgid "Download"
msgstr "Download"
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr "Impossibile eseguire il comando!"
msgid "Loading"
msgstr "Caricamento"
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr "Accesso Pubblico"
msgid "Run"
msgstr "Esegui"
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "In attesa del comando da completare..."
+
+#~ msgid "Access command with"
+#~ msgstr "Accesso comando con"
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-10-05 17:15+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
+"Project-Id-Version: \n"
+"PO-Revision-Date: 2017-01-21 18:09+0900\n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
"Language-Team: none\n"
"Language: ja\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
+"POT-Creation-Date: \n"
msgid "A short textual description of the configured command"
msgstr "設定したコマンドの簡単な説明文を記載します"
-msgid "Access command with"
-msgstr ""
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
-msgstr ""
+msgstr "事前認証無しでのコマンドの実行と、結果出力のダウンロードを許可します。"
msgid "Allow the user to provide additional command line arguments"
msgstr "コマンドラインに対する引数の追記を許可するか設定します"
msgid "Command"
msgstr "コマンド"
+msgid "Command executed successfully."
+msgstr "コマンドの実行に成功しました。"
+
+msgid "Command exited with status code"
+msgstr "コマンドは次のステータス コードで終了しました:"
+
msgid "Command failed"
msgstr "コマンド失敗"
msgid "Download"
msgstr "ダウンロード"
+msgid "Download execution result"
+msgstr "実行結果のダウンロード:"
+
msgid "Failed to execute command!"
msgstr "コマンドの実行に失敗しました!"
msgid "Loading"
msgstr "読み込み中"
+msgid "Or display result"
+msgstr "または結果の表示:"
+
msgid "Public access"
msgstr "パブリック・アクセス"
msgid "Run"
msgstr "実行"
+msgid "Standard Error"
+msgstr "標準エラー"
+
+msgid "Standard Output"
+msgstr "標準出力"
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
-msgstr "このページでは、ウェブインターフェースから簡単にシェル・コマンドを実行することができます。"
+msgstr ""
+"このページでは、ウェブインターフェースから簡単にシェル・コマンドを実行するこ"
+"とができます。"
msgid "Waiting for command to complete..."
msgstr "コマンド実行中です..."
+
+#~ msgid "Access command with"
+#~ msgstr "コマンドへのアクセス"
msgid "A short textual description of the configured command"
msgstr ""
-msgid "Access command with"
-msgstr ""
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr ""
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr ""
msgid "Download"
msgstr ""
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr ""
msgid "Loading"
msgstr ""
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr ""
msgid "Run"
msgstr ""
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "A short textual description of the configured command"
msgstr "En kort tekstlig beskrivelse av den konfigurerte kommandoen"
-msgid "Access command with"
-msgstr "Åpne kommandoen med"
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "Kommando"
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr "Kommando feilet"
msgid "Download"
msgstr "Nedlasting"
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr "Kunne ikke utføre kommandoen!"
msgid "Loading"
msgstr "Laster"
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr "Tilgjengelig for alle"
msgid "Run"
msgstr "Kjør"
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "Venter på at kommandoen fullføres..."
+
+#~ msgid "Access command with"
+#~ msgstr "Åpne kommandoen med"
msgid "A short textual description of the configured command"
msgstr "Krótki opis konfigurowanej komendy"
-msgid "Access command with"
-msgstr "Dostęp do komendy przez"
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "Komenda"
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr "Zła komenda"
msgid "Download"
msgstr "Download"
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr "Nie można wykonać komendy!"
msgid "Loading"
msgstr "Ładowanie"
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr "Publiczny dostęp"
msgid "Run"
msgstr "Uruchom"
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "Czekanie na wykonanie komendy..."
+
+#~ msgid "Access command with"
+#~ msgstr "Dostęp do komendy przez"
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2014-03-15 22:02+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
+"Project-Id-Version: \n"
+"PO-Revision-Date: 2017-02-20 17:39-0300\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
"Language-Team: none\n"
"Language: pt_BR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
+"POT-Creation-Date: \n"
msgid "A short textual description of the configured command"
msgstr "Uma pequena descrição textual do comando configurado"
-msgid "Access command with"
-msgstr "Acessar o comando com"
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "Comando"
+msgid "Command executed successfully."
+msgstr "O comando executou com sucesso."
+
+msgid "Command exited with status code"
+msgstr "O comando encerrou com um estado de erro"
+
msgid "Command failed"
msgstr "O comando falhou"
msgid "Download"
msgstr "Baixar"
+msgid "Download execution result"
+msgstr "Baixar os resultados da execução"
+
msgid "Failed to execute command!"
msgstr "Falha ao executar comando!"
msgid "Loading"
msgstr "Carregando"
+msgid "Or display result"
+msgstr "Ou mostre o resultado"
+
msgid "Public access"
msgstr "Acesso público"
msgid "Run"
msgstr "Executar"
+msgid "Standard Error"
+msgstr "Saída de Erro"
+
+msgid "Standard Output"
+msgstr "Saída Padrão"
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "Aguardando a conclusão do comando..."
+
+#~ msgid "Access command with"
+#~ msgstr "Acessar o comando com"
msgid "A short textual description of the configured command"
msgstr "Uma pequena descrição textual do comando configurado"
-msgid "Access command with"
-msgstr "Aceder ao comando com"
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "Comando"
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr "O comando falhou"
msgid "Download"
msgstr "Descarregar"
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr "Falha ao executar comando!"
msgid "Loading"
msgstr "A carregar"
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr "Acesso público"
msgid "Run"
msgstr "Executar"
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "A aguardar que o comando termine..."
+
+#~ msgid "Access command with"
+#~ msgstr "Aceder ao comando com"
msgid "A short textual description of the configured command"
msgstr "O scurta descriere textuala a comenzii configurate"
-msgid "Access command with"
-msgstr "Acces la comanda cu"
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "Comandă"
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr "Comandă eşuată"
msgid "Download"
msgstr "Descarca"
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr "S-a esuat executarea comenzii!!"
msgid "Loading"
msgstr "Se incarca"
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr "Access public"
msgid "Run"
msgstr "Ruleaza"
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "Astept finalizarea comenzii..."
+
+#~ msgid "Access command with"
+#~ msgstr "Acces la comanda cu"
msgid "A short textual description of the configured command"
msgstr "Короткое текстовое описание команды"
-msgid "Access command with"
-msgstr "Доступ к команде через"
-
#, fuzzy
msgid ""
"Allow executing the command and downloading its output without prior "
msgid "Command"
msgstr "Команда"
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr "Команда не выполнена"
msgid "Download"
msgstr "Скачать"
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr "Ошибка выполнения команды!"
msgid "Loading"
msgstr "Загрузка"
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr "Публичный доступ"
msgid "Run"
msgstr "Запуск"
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "Ожидание завершения команды..."
+
+#~ msgid "Access command with"
+#~ msgstr "Доступ к команде через"
msgid "A short textual description of the configured command"
msgstr ""
-msgid "Access command with"
-msgstr ""
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr ""
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr ""
msgid "Download"
msgstr ""
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr ""
msgid "Loading"
msgstr ""
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr ""
msgid "Run"
msgstr ""
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "A short textual description of the configured command"
msgstr ""
-msgid "Access command with"
-msgstr ""
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr ""
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr ""
msgid "Download"
msgstr ""
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr ""
msgid "Loading"
msgstr ""
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr ""
msgid "Run"
msgstr ""
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "A short textual description of the configured command"
msgstr ""
-msgid "Access command with"
-msgstr ""
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr ""
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr ""
msgid "Download"
msgstr ""
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr ""
msgid "Loading"
msgstr ""
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr ""
msgid "Run"
msgstr ""
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "A short textual description of the configured command"
msgstr ""
-msgid "Access command with"
-msgstr ""
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr ""
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr ""
msgid "Download"
msgstr ""
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr ""
msgid "Loading"
msgstr ""
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr ""
msgid "Run"
msgstr ""
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "A short textual description of the configured command"
msgstr "Короткий опис команд налаштування"
-msgid "Access command with"
-msgstr ""
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr ""
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr "Команда не виконана"
msgid "Download"
msgstr "Завантажити"
+msgid "Download execution result"
+msgstr ""
+
#, fuzzy
msgid "Failed to execute command!"
msgstr "Помилка під час запуску команди!"
msgid "Loading"
msgstr "Триває завантаження"
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr "Відкритий доступ"
msgid "Run"
msgstr "Запустити"
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
#, fuzzy
msgid ""
"This page allows you to configure custom shell commands which can be easily "
msgid "A short textual description of the configured command"
msgstr ""
-msgid "Access command with"
-msgstr ""
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr ""
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr ""
msgid "Download"
msgstr ""
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr ""
msgid "Loading"
msgstr ""
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr ""
msgid "Run"
msgstr ""
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-10-08 15:47+0200\n"
-"Last-Translator: Tanyingyu <Tanyingyu@163.com>\n"
+"Project-Id-Version: \n"
+"PO-Revision-Date: 2017-01-21 09:34+0900\n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
"Language-Team: none\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
+"POT-Creation-Date: \n"
msgid "A short textual description of the configured command"
msgstr "简短描述命令用途"
-msgid "Access command with"
-msgstr "访问命令"
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "命令"
+msgid "Command executed successfully."
+msgstr "命令成功执行。"
+
+msgid "Command exited with status code"
+msgstr "命令退出，状态码："
+
msgid "Command failed"
msgstr "执行命令失败"
msgid "Download"
msgstr "下载"
+msgid "Download execution result"
+msgstr "下载执行结果"
+
msgid "Failed to execute command!"
msgstr "执行命令失败！"
msgid "Loading"
msgstr "加载中"
+msgid "Or display result"
+msgstr "显示执行结果"
+
msgid "Public access"
msgstr "公共访问"
msgid "Run"
msgstr "运行"
+msgid "Standard Error"
+msgstr "标准错误流"
+
+msgid "Standard Output"
+msgstr "标准输出流"
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "等待命令执行完成... ..."
+
+#~ msgid "Command exited with status code "
+#~ msgstr "命令退出，状态码："
msgid "A short textual description of the configured command"
msgstr "以短文描述設定指令"
-msgid "Access command with"
-msgstr "存取指令"
-
msgid ""
"Allow executing the command and downloading its output without prior "
"authentication"
msgid "Command"
msgstr "指令"
+msgid "Command executed successfully."
+msgstr ""
+
+msgid "Command exited with status code"
+msgstr ""
+
msgid "Command failed"
msgstr "命令失敗"
msgid "Download"
msgstr "下載"
+msgid "Download execution result"
+msgstr ""
+
msgid "Failed to execute command!"
msgstr "執行指令失敗!"
msgid "Loading"
msgstr "掛載"
+msgid "Or display result"
+msgstr ""
+
msgid "Public access"
msgstr "公用存取"
msgid "Run"
msgstr "執行"
+msgid "Standard Error"
+msgstr ""
+
+msgid "Standard Output"
+msgstr ""
+
msgid ""
"This page allows you to configure custom shell commands which can be easily "
"invoked from the web interface."
msgid "Waiting for command to complete..."
msgstr "等待完整命令中..."
+
+#~ msgid "Access command with"
+#~ msgstr "存取指令"
--- /dev/null
+#
+# Copyright (C) 2017 Dan Luedtke <mail@danrl.com>
+#
+# This is free software, licensed under the Apache License, Version 2.0 .
+#
+
+include $(TOPDIR)/rules.mk
+
+LUCI_TITLE:=Cloudshark capture tool Web UI
+LUCI_DEPENDS:=+cshark
+LUCI_PKGARCH:=all
+
+PKG_MAINTAINER:=Luka Perkov <luka@openwrt.org>
+
+include ../../luci.mk
+
+# call BuildPackage - OpenWrt buildroot signature
--- /dev/null
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright (C) 2014, QA Cafe, Inc.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+]]--
+
+module("luci.controller.cshark", package.seeall)
+
+function index()
+ page = node("admin", "network", "cloudshark")
+ page.target = cbi("admin_network/cshark")
+ page.title = _("CloudShark")
+ page.order = 70
+
+ page = entry({"admin", "network", "cshark_iface_dump_start"}, call("cshark_iface_dump_start"), nil)
+ page.leaf = true
+
+ page = entry({"admin", "network", "cshark_iface_dump_stop"}, call("cshark_iface_dump_stop"), nil)
+ page.leaf = true
+
+ page = entry({"admin", "network", "cshark_check_status"}, call("cshark_check_status"), nil)
+ page.leaf = true
+
+ page = entry({"admin", "network", "cshark_link_list_get"}, call("cshark_link_list_get"), nil)
+ page.leaf = true
+
+ page = entry({"admin", "network", "cshark_link_list_clear"}, call("cshark_link_list_clear"), nil)
+ page.leaf = true
+end
+
+function cshark_iface_dump_start(ifname, value, flag, filter)
+ if ifname == nil or ifname == '' then
+ ifname = 'any'
+ end
+ if tonumber(value) == nil
+ then
+ value = '0'
+ end
+ if filter == nil or filter == '' then
+ filter = ''
+ end
+
+ if flag == nil or flag == '' then
+ filter = 'T'
+ end
+
+ luci.http.prepare_content("text/plain")
+
+ local res = os.execute("(/sbin/cshark -i " .. ifname .. " -" .. flag .. " " .. value .. " -p /tmp/cshark-luci.pid " .. filter .. " > /tmp/cshark-luci.out 2>&1) &")
+ luci.http.write(tostring(res))
+end
+
+function cshark_iface_dump_stop()
+ luci.http.prepare_content("text/plain")
+
+ local f = io.open("/tmp/cshark-luci.pid", "rb")
+ local pid = f:read("*all")
+ io.close(f)
+
+ local res = os.execute("kill -TERM " .. pid)
+ luci.http.write(tostring(res))
+end
+
+function cshark_check_status()
+
+ local msg = "";
+ local status;
+ local f = io.open("/tmp/cshark-luci.pid","r")
+ if f ~= nil then
+ status = 1;
+ io.close(f)
+ else
+ status = 0;
+ end
+
+ f = io.open("/tmp/cshark-luci.out","r")
+ if f ~= nil then
+ msg = f:read("*all")
+ io.close(f)
+ if msg ~= '' then
+ os.remove('/tmp/cshark-luci.out')
+ end
+ end
+
+ luci.http.prepare_content("application/json")
+
+ local res = {}
+ res["status"] = status;
+ res["msg"] = msg;
+
+ luci.http.write_json(res)
+end
+
+function cshark_link_list_get()
+ local uci = require("uci").cursor()
+
+ luci.http.prepare_content("application/json")
+
+ luci.http.write("[")
+
+ local t = uci:get("cshark", "cshark", "entry")
+ if (t ~= nil) then
+ for i = #t, 1, -1 do
+ luci.http.write("[\"" .. t[i] .. "\"],")
+ end
+ end
+
+ luci.http.write("[]]")
+end
+
+function cshark_link_list_clear()
+ local uci = require("uci").cursor()
+
+ uci:delete("cshark", "cshark", "entry")
+ uci:commit("cshark");
+
+ luci.http.status(200, "OK")
+end
--- /dev/null
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright (C) 2014, QA Cafe, Inc.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+$Id$
+]]--
+
+local fs = require "nixio.fs"
+
+m = Map("cshark", translate("CloudShark"))
+
+if fs.access("/etc/config/cshark") then
+ m:section(SimpleSection).template = "cshark"
+
+ s = m:section(TypedSection, "cshark", translate("Options"))
+ s.anonymous = true
+ s.addremove = false
+
+ s:option(Value, "url", translate("CloudShark URL"))
+ s:option(Value, "token", translate("CloudShark API token"))
+end
+
+return m
--- /dev/null
+<%#
+LuCI - Lua Configuration Interface
+
+Copyright (C) 2014, QA Cafe, Inc.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+$Id$
+
+-%>
+
+<fieldset class="cbi-section">
+ <legend><%:Start network capture%></legend>
+ <div class="cbi-section-node">
+ <table class="cbi-section-table">
+ <tr>
+ <th><%:Interface%></th>
+ <th colspan='2'><%:seconds, packets, bytes%></th>
+ <th><%:Filter%></th>
+ <th><%:Actions%></th>
+ </tr>
+ <tr>
+ <td>
+ <select title="<%:Interface%>" style="width:auto" id="s_interfaces">
+ <%
+ local nixio = require "nixio"
+ for k, v in ipairs(nixio.getifaddrs()) do
+ if v.family == "packet" then
+ %>
+ <option value="<%=v.name%>"><%=v.name%> </option>
+ <%
+ end
+ end
+ %>
+ <option value="any"><%:any%></option>
+ </select>
+ </td>
+ <td colspan='2'>
+ <input id="tx_value" type="text" value="0" />
+ <select title="<%:timeout, bytes, seconds%>" id="s_value_type" style="width:auto">
+ <option value="T"><%:seconds%></option>
+ <option value="P"><%:packets%></option>
+ <option value="S"><%:bytes%></option>
+ </select>
+ </td>
+ <td>
+ <input style="margin: 5px 0" type="text" title="<%:Filter%>" placeholder="filter" id="i_filter" />
+ </td>
+ <td>
+ <input type="button" id="bt_action" data-action="start" value="<%:Start capture%>" class="cbi-button" />
+ </td>
+ </tr>
+ </table>
+ </div>
+</fieldset>
+
+<fieldset class="cbi-section">
+ <span id="cshark-rc-output"></span>
+</fieldset>
+
+<hr/>
+
+<fieldset class="cbi-section">
+ <legend><%:Capture links%></legend>
+ <div class="cbi-section-node">
+ <table id="t_link_list" class="cbi-section-table">
+ <tr class="cbi-section-table-titles">
+ <th class="cbi-section-table-cell"><%:Capture URL%></th>
+ <th class="cbi-section-table-cell"><%:Capture time%></th>
+ </tr>
+ </table>
+ </div>
+</fieldset>
+
+<fieldset class="cbi-section">
+ <a href="https://support.cloudshark.org/openwrt/openwrt-cloudshark.html" target="_blank">Visit support.cloudshark.org for help.</a>
+</fieldset>
+
+<hr/>
+
+<script type="text/javascript" src="<%=resource%>/cbi.js"></script>
+<script type="text/javascript">//<![CDATA[
+
+ var capture_running = 0;
+ var pid_file = 0;
+ var bt_action = document.getElementById('bt_action');
+ var a_clear_links = document.getElementById('a_clear_links');
+ var output = document.getElementById('cshark-rc-output');
+ var loader = '<img src="<%=resource%>/icons/loading.gif" alt="<%:Loading%>" width="16" height="16" style="vertical-align:middle" /> ';
+ var msg = { 'start' : '<%:Waiting for capture to complete...%>', 'stop' : '<%:Waiting for upload to complete...%>' };
+ var status_msg = msg['start'];
+
+ function get_date(timestamp)
+ {
+ function pad_str(str)
+ {
+ return (str < 10) ? "0" + str : str;
+ }
+
+ var current_date = new Date(timestamp * 1000);
+ return current_date.getFullYear() + "-" +
+ pad_str(current_date.getMonth() + 1) + "-" +
+ pad_str(current_date.getDate()) + " " +
+ pad_str(current_date.getHours()) + ":" +
+ pad_str(current_date.getMinutes()) + ":" +
+ pad_str(current_date.getSeconds());
+ }
+
+ bt_action.onclick = function()
+ {
+ var action = this.getAttribute("data-action");
+ var csxhr = new XHR();
+
+ if (action == "stop")
+ {
+ update_status(action);
+
+ bt_action.disabled = true;
+
+ csxhr.get('<%=luci.dispatcher.build_url("admin", "network")%>/cshark_iface_dump_stop', null,
+ function(x)
+ {
+ if (!x || x.responseText.trim() != "0")
+ {
+ update_status("failed", "Invalid response on stop.");
+ }
+ });
+
+ }
+ else if (action == "start")
+ {
+
+ var s_interfaces = document.getElementById('s_interfaces');
+ var s_value_type = document.getElementById('s_value_type');
+ var i_filter = document.getElementById('i_filter');
+
+ var if_n = s_interfaces.selectedIndex;
+ var t_n = s_value_type.selectedIndex;
+ var ifname = s_interfaces.options[if_n].value.trim();
+ var filter_val = i_filter.value.trim();
+ var tx_val = document.getElementById('tx_value').value.trim();
+ var type_val = s_value_type.options[t_n].value.trim();
+
+ if (type_val != 'P' && type_val != 'T' && type_val != 'S') type_val = 'T';
+
+ if (!ifname || !type_val) return;
+
+ if (isNaN(tx_val)) return alert("<%:value for [seconds, packets, bytes] must be Integer%>");
+
+ update_status(action);
+
+ csxhr.get('<%=luci.dispatcher.build_url("admin", "network")%>/cshark_iface_dump_start/' + ifname + '/' + tx_val + '/' + type_val + '/'+ filter_val, null,
+ function(x)
+ {
+ if (!x)
+ update_status("failed", "Invalid response on start.");
+ else
+ update_status("running");
+ });
+ }
+ }
+
+ function update_status(status, message)
+ {
+ switch (status)
+ {
+ case 'start':
+ case 'stop':
+ status_msg = msg[status];
+ output.innerHTML = loader + status_msg;
+ break
+
+ case 'running':
+ if (capture_running) break;;
+
+ output.innerHTML = loader + status_msg;
+
+ bt_action.value = '<%:Stop capture%>';
+ bt_action.setAttribute('data-action', 'stop');
+ capture_running = 1;
+ break;
+
+ case 'completed':
+ case 'failed':
+ if (!capture_running) break;
+
+ if (status == "completed")
+ {
+ link_list_update();
+ }
+
+ output.innerHTML = "<pre>" + message + "</pre>";
+ bt_action.value = '<%:Start capture%>';
+ bt_action.setAttribute('data-action', 'start');
+ bt_action.disabled = false;
+ capture_running = 0;
+ break;
+ }
+ }
+
+
+ function check_status()
+ {
+
+ XHR.poll(3, '<%=luci.dispatcher.build_url("admin", "network")%>/cshark_check_status', null,
+ function(x, data)
+ {
+ if (!x)
+ {
+ if (capture_running)
+ update_status("failed", "Invalid response when fetching status.");
+
+ return;
+ }
+ console.log(data)
+
+ update_status( (data.status == 1) && "running" || "completed", data.msg);
+ })
+ }
+
+ function link_list_clear()
+ {
+ var csxhr_del = new XHR();
+ csxhr_del.get('<%=luci.dispatcher.build_url("admin", "network")%>/cshark_link_list_clear', null,
+ function(x)
+ {
+ if (!x)
+ return false;
+
+ link_list_update();
+ });
+ }
+
+
+ function link_list_update()
+ {
+ var t_link = document.getElementById("t_link_list");
+ if (!t_link) return;
+
+ var row_count = t_link.rows.length;
+ while(--row_count) t_link.deleteRow(row_count);
+
+ var cell = t_link.insertRow(-1).insertCell(0);
+ cell.colSpan = 2;
+ cell.innerHTML = loader;
+
+ var csxhr_link = new XHR();
+ csxhr_link.get('<%=luci.dispatcher.build_url("admin", "network")%>/cshark_link_list_get', null,
+ function(x, entries)
+ {
+ var row = t_link.deleteRow(1);
+
+ if (!x) return;
+
+ if (!entries || !entries.length)
+ {
+ var cell = t_link.insertRow(-1).insertCell(0);
+ cell.colSpan = 2;
+ cell.innerHTML = '<em><br />There are no captures available yet.</em>';
+
+ return;
+ }
+
+ for (var i = 0, len = entries.length; i < len ; i++)
+ {
+ var entry = entries[i][0];
+ if (!entry) continue;
+
+ var data = entry.split(",");
+ var url = data[0];
+ var timestamp = data[1];
+
+ var row = t_link.insertRow(-1);
+ row.insertCell(0).innerHTML = '<a href="'+url+'" target="_blank">'+url+'</a>';
+ row.insertCell(1).innerHTML = get_date(timestamp);
+ }
+
+ var cell = t_link.insertRow(-1).insertCell(0);
+ cell.colSpan = 2;
+ cell.style.textAlign="center";
+ cell.innerHTML = '<input type="button" onclick="link_list_clear()" class="cbi-button" value ="<%:Clear list%>" />';
+ })
+ }
+
+ check_status();
+ link_list_update();
+//]]></script>
c = c + 1
%>
<input class="cbi-input-radio" onclick="cbi_d_update(this.id)" onchange="cbi_d_update(this.id)" type="radio"<%= attr("id", cbid..c) .. attr("name", cbid) .. attr("value", key) .. ifattr((self:cfgvalue(section) or self.default) == key, "checked", "checked") %> />
+ <label<%= attr("for", cbid..c) %>></label>
<label<%= attr("for", cbid..c) %>><%=self.vallist[i]%></label>
<% if c == self.size then c = 0 %><% if self.orientation == "horizontal" then %> <% else %><br /><% end %>
<% end end %>
attr("id", cbid) .. attr("name", cbid) .. attr("value", self.enabled or 1) ..
ifattr((self:cfgvalue(section) or self.default) == self.enabled, "checked", "checked")
%> />
+<label<%= attr("for", cbid)%>></label>
<%+cbi/valuefooter%>
<!-- ++ END ++ Dynamic DNS ++ overview_enabled.htm ++ -->
msgstr ""
"Project-Id-Version: luci-app-ddns 2.4.0-1\n"
"POT-Creation-Date: 2016-01-30 11:07+0100\n"
-"PO-Revision-Date: 2016-07-01 22:40-0300\n"
-"Last-Translator: Matheus Dal Mago <matheusdalmago10@gmail.com>\n"
+"PO-Revision-Date: 2017-02-20 17:41-0300\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
"Language-Team: \n"
"Language: pt_BR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Poedit 1.8.8\n"
+"X-Generator: Poedit 1.8.11\n"
msgid "&"
msgstr "&"
msgstr "Intervalo de tentativas em Erro"
msgid "Event Network"
-msgstr ""
+msgstr "Rede de Evento"
msgid "File"
msgstr "Arquivo"
msgstr "Nenhum certificado encontrado"
msgid "No data"
-msgstr ""
+msgstr "Sem dados"
msgid "No logging"
-msgstr ""
+msgstr "Sem registros"
msgid "Non-public and by default blocked IP's"
msgstr "IPs não públicos e bloqueados por padrão"
msgid "Notice"
-msgstr ""
+msgstr "Aviso"
msgid "Number of last lines stored in log files"
msgstr "Número das últimas linhas salvas nos arquivos de log"
"Em Erro, o script irá para a execução após um número definido de tentativas"
msgid "OpenWrt Wiki"
-msgstr ""
+msgstr "Wiki do OpenWRT"
msgid "Optional Encoded Parameter"
msgstr "Parâmetro Opcionalmente Codificado"
msgstr "Opcional: Substitui [PARAMOPT] na URL de atualização"
msgid "Overview"
-msgstr ""
+msgstr "Visão Geral"
msgid "PROXY-Server"
msgstr "servidor PROXY"
msgstr "Não há serviço configurado"
msgid "Timer Settings"
-msgstr ""
+msgstr "Configurações do Controlador de Tempo"
msgid "To change global settings click here"
msgstr "Clique aqui para mudar configurações globais"
LUCI_TITLE:=LuCI Diagnostics Tools (Device Info)
LUCI_DEPENDS:=+luci-app-diag-core +smap +netdiscover +mac-to-devinfo +httping +smap-to-devinfo +netdiscover-to-devinfo @BROKEN
+define Package/luci-app-diag-devinfo/conffiles
+/etc/config/luci_devinfo
+endef
+
include ../../luci.mk
# call BuildPackage - OpenWrt buildroot signature
--- /dev/null
+#
+# Copyright (C) 2016 The LuCI Team <luci@lists.subsignal.org>
+#
+# This is free software, licensed under the GNU General Public License v3.
+#
+
+include $(TOPDIR)/rules.mk
+
+LUCI_TITLE:=LuCI Support for DynaPoint
+LUCI_DEPENDS:=+dynapoint
+
+PKG_NAME:=luci-app-dynapoint
+PKG_VERSION:=1.0
+PKG_RELEASE:=1
+PKG_LICENSE:=GPL-3.0+
+PKG_MAINTAINER:=Tobias Ilte <tobias.ilte@campus.tu-berlin.de>
+include ../../luci.mk
+
+# call BuildPackage - OpenWrt buildroot signature
+
--- /dev/null
+module("luci.controller.dynapoint", package.seeall)
+
+function index()
+ if not nixio.fs.access("/etc/config/dynapoint") then
+ return
+ end
+ entry({"admin", "services", "dynapoint"}, cbi("dynapoint"), _("DynaPoint"))
+end
+
--- /dev/null
+local uci = require "luci.model.uci".cursor()
+local a = require "luci.model.ipkg"
+local DISP = require "luci.dispatcher"
+
+local wlcursor = luci.model.uci.cursor_state()
+local wireless = wlcursor:get_all("wireless")
+local ifaces = {}
+
+for k, v in pairs(wireless) do
+ if v[".type"] == "wifi-iface" then
+ table.insert(ifaces, v)
+ end
+end
+
+m = Map("dynapoint")
+m:chain("wireless")
+
+s = m:section(NamedSection, "internet", "rule", translate("Configuration"), translate("Check Internet connectivity via HTTP header download"))
+
+hosts = s:option(DynamicList, "hosts", translate("List of host addresses"), translate("List of host addresses (url or IP) to track and request http headers from"))
+hosts.datatype = "string"
+
+interval = s:option(Value, "interval", translate("Test-run interval"), translate("Time interval in seconds to re-start a new test run"))
+interval.datatype = "uinteger"
+interval.default = "30"
+
+offline_treshold = s:option(Value, "offline_threshold", translate("Switch_to_offline threshold"), translate("Failure counter after how many failed download attempts, the state is considered as offline"))
+offline_treshold.datatype = "uinteger"
+offline_treshold.default = "1"
+
+add_hostname_to_ssid = s:option(Flag, "add_hostname_to_ssid", translate("Append hostname to ssid"), translate("Append the router's hostname to the SSID when connectivity check fails"))
+add_hostname_to_ssid.rmempty = false
+
+
+if (a.installed("curl") == true) then
+ use_curl = s:option(Flag, "use_curl", translate("Use curl"), translate("Use curl instead of wget for testing the connectivity."))
+ use_curl.rmempty = false
+
+ curl_interface = s:option(Value, "curl_interface", translate("Used interface"), translate("Which interface should curl use. (Use ifconfig to find out)"))
+ curl_interface.datatype = "string"
+ curl_interface:depends("use_curl","1")
+ curl_interface.placeholder = "eth0"
+else
+ use_curl = s:option(Flag, "use_curl", translate("Use curl instead of wget"), translate("Curl is currently not installed.")
+ .." Please install the package in the "
+ ..[[<a href="]] .. DISP.build_url("admin", "system", "packages")
+ .. "?display=available&query=curl"..[[">]]
+ .. "Software Section" .. [[</a>]]
+ .. "."
+ )
+ use_curl.rmempty = false
+ use_curl.template = "dynapoint/cbi_checkbox"
+end
+
+m1 = Map("wireless", "DynaPoint", translate("Dynamic Access Point Manager"))
+
+aps = m1:section(TypedSection, "wifi-iface", translate("List of Wireless Virtual Interfaces (wVIF)"))
+aps.addremove = false
+aps.anonymous = true
+aps.template = "cbi/tblsection"
+
+status = aps:option(DummyValue, "disabled", translate("WiFi Status"))
+status.template = "dynapoint/cbi_color"
+
+function status.cfgvalue(self,section)
+ local val = m1:get(section, "disabled")
+ if val == "1" then return translate("Disabled") end
+ if (val == nil or val == "0") then return translate("Enabled") end
+ return val
+end
+
+device = aps:option(DummyValue, "device", translate("Device"))
+function device.cfgvalue(self,section)
+ local dev = m1:get(section, "device")
+ local val = m1:get(dev, "hwmode")
+ if val == "11a" then return dev .. " (5 GHz)" else
+ return dev .. " (2,4 GHz)"
+ end
+ return val
+end
+
+
+
+
+
+mode = aps:option(DummyValue, "mode", translate("Mode"))
+
+ssid = aps:option(DummyValue, "ssid", translate("SSID"))
+
+
+action = aps:option(ListValue, "dynapoint_rule", translate("Activate this wVIF if status is:"))
+action.widget="select"
+action:value("internet",translate("Online"))
+action:value("!internet",translate("Offline"))
+action:value("",translate("Not used by DynaPoint"))
+action.default = ""
+
+return m1,m
+
--- /dev/null
+<%+cbi/valueheader%>
+
+<input class="cbi-input-checkbox" disabled data-update="click change" type="checkbox" id="cbid.dynapoint.internet.use_curl" name="cbid.dynapoint.internet.use_curl" value="1" />
+
+
+<%+cbi/valuefooter%>
--- /dev/null
+<%+cbi/valueheader%>
+
+
+<%
+if (self:cfgvalue(section) == translate("Disabled")) then
+%>
+
+<span id="<%=cbid%>.disabled" style="background-color:red;"><%=self:cfgvalue(section)%></span>
+
+<%
+else
+%>
+<span id="<%=cbid%>.disabled" style="background-color:lime;"><%=self:cfgvalue(section)%></span>
+<%
+end
+%>
+
+<%+cbi/valuefooter%>
--- /dev/null
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"PO-Revision-Date: 2016-08-31 15:51+0200\n"
+"Language-Team: German\n"
+"Language: de\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "Activate this wVIF if status is:"
+msgstr "Aktiviere diese drahtlose Schnittstelle wenn:"
+
+msgid "Append hostname to ssid"
+msgstr "Anfügen des hostname zur SSID"
+
+msgid "Append the router's hostname to the SSID when connectivity check fails"
+msgstr ""
+"Fügt den hostname des routers zur SSID an, wenn die Verbindungsüberprüfung "
+"fehl schlägt"
+
+msgid "Check Internet connectivity via HTTP header download"
+msgstr "Testen der Internetverfügbarkeit via HTTP header download"
+
+msgid "Configuration"
+msgstr "Konfiguration"
+
+msgid "Curl is currently not installed."
+msgstr "Curl ist momentan nicht installiert."
+
+msgid "Device"
+msgstr "Gerät"
+
+msgid "Disabled"
+msgstr "Deaktiviert"
+
+msgid "DynaPoint"
+msgstr ""
+
+msgid "Dynamic Access Point Manager"
+msgstr ""
+
+msgid "Enabled"
+msgstr "Aktiviert"
+
+msgid ""
+"Failure counter after how many failed download attempts, the state is "
+"considered as offline"
+msgstr ""
+"Anzahl der fehlgeschlagenen Downloadversuche, nach denen die Verbindung als offline angesehen wird"
+
+msgid "List of Wireless Virtual Interfaces (wVIF)"
+msgstr "Liste der Drahtlosen virtuellen Schnittstellen"
+
+msgid "List of host addresses"
+msgstr "Liste der Zieladressen"
+
+msgid ""
+"List of host addresses (url or IP) to track and request http headers from"
+msgstr "Liste der Zieladressen (URL oder IP) für den HTTP header download"
+
+msgid "Mode"
+msgstr "Modus"
+
+msgid "Not used by DynaPoint"
+msgstr "Nicht von DynaPoint benutzt"
+
+msgid "Offline"
+msgstr "Offline"
+
+msgid "Online"
+msgstr "Online"
+
+msgid "SSID"
+msgstr ""
+
+msgid "Switch_to_offline threshold"
+msgstr "Offline-Schwelle"
+
+msgid "Test-run interval"
+msgstr "Testlaufintervall"
+
+msgid "Time interval in seconds to re-start a new test run"
+msgstr "Zeitintervall in Sekunden für einen Testlauf"
+
+msgid "Use curl"
+msgstr "Curl benutzen"
+
+msgid "Use curl instead of wget"
+msgstr "Curl anstatt wget benutzen"
+
+msgid "Use curl instead of wget for testing the connectivity."
+msgstr "Curl anstatt wget benutzen, um die Internetverbindung zu überprüfen."
+
+msgid "Used interface"
+msgstr "Benutztes interface"
+
+msgid "Which interface should curl use. (Use ifconfig to find out)"
+msgstr ""
+"Welches Interface von curl benutzt werden soll. (ifconfig benutzen, um das "
+"herauszufinden"
+
+msgid "WiFi Status"
+msgstr ""
+
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"Language: ja\n"
+
+msgid "Activate this wVIF if status is:"
+msgstr "wVIFを有効化する接続ステータス:"
+
+msgid "Append hostname to ssid"
+msgstr "ホスト名をSSIDに追加する"
+
+msgid "Append the router's hostname to the SSID when connectivity check fails"
+msgstr "接続性のチェックが失敗した場合、ルーターのホスト名をSSIDに追加します。"
+
+msgid "Check Internet connectivity via HTTP header download"
+msgstr ""
+"HTTP ヘッダーのダウンロードを通して、インターネットの接続性をチェックします。"
+
+msgid "Configuration"
+msgstr "設定"
+
+msgid "Curl is currently not installed."
+msgstr "curl は現在インストールされていません。"
+
+msgid "Device"
+msgstr "デバイス"
+
+msgid "Disabled"
+msgstr "無効"
+
+msgid "DynaPoint"
+msgstr "DynaPoint"
+
+msgid "Dynamic Access Point Manager"
+msgstr "ダイナミック アクセスポイント マネージャー"
+
+msgid "Enabled"
+msgstr "有効"
+
+msgid ""
+"Failure counter after how many failed download attempts, the state is "
+"considered as offline"
+msgstr "状態をオフラインと見なすまでの、ダウンロード試行の失敗回数です。"
+
+msgid "List of Wireless Virtual Interfaces (wVIF)"
+msgstr "無線仮想インターフェース (wVIF) のリスト"
+
+msgid "List of host addresses"
+msgstr "ホストアドレスのリスト"
+
+msgid ""
+"List of host addresses (url or IP) to track and request http headers from"
+msgstr ""
+"HTTP ヘッダーの追跡およびリクエストを行う、ホスト アドレス（URLまたはIP）のリ"
+"ストです。"
+
+msgid "Mode"
+msgstr "モード"
+
+msgid "Not used by DynaPoint"
+msgstr "DynaPointで使用しない"
+
+msgid "Offline"
+msgstr "オフライン"
+
+msgid "Online"
+msgstr "オンライン"
+
+msgid "SSID"
+msgstr "SSID"
+
+msgid "Switch_to_offline threshold"
+msgstr "オフライン化閾値"
+
+msgid "Test-run interval"
+msgstr "テスト実行間隔"
+
+msgid "Time interval in seconds to re-start a new test run"
+msgstr "接続性テストを再実行するまでの時間間隔（秒）です。"
+
+msgid "Use curl"
+msgstr "curl を使用する"
+
+msgid "Use curl instead of wget"
+msgstr "wget の代わりに curl を使用する"
+
+msgid "Use curl instead of wget for testing the connectivity."
+msgstr "接続性のテストの際、wget の代わりに curl を使用します。"
+
+msgid "Used interface"
+msgstr "使用するインターフェース"
+
+msgid "Which interface should curl use. (Use ifconfig to find out)"
+msgstr ""
+"curl が使用するインターフェースです。ifconfigを使用してインターフェース名を確"
+"認します。"
+
+msgid "WiFi Status"
+msgstr "無線ステータス"
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Language: pt_BR\n"
+
+msgid "Activate this wVIF if status is:"
+msgstr "Aivar este wVIF se o estado for:"
+
+msgid "Append hostname to ssid"
+msgstr "Sufixar o nome do equipamento ao SSID"
+
+msgid "Append the router's hostname to the SSID when connectivity check fails"
+msgstr ""
+"Sufixar o nome do roteador ao SSID quando a verificação da conectividade "
+"falhar"
+
+msgid "Check Internet connectivity via HTTP header download"
+msgstr "Cerifique a conectividade com a internet baixando o cabeçalho HTTP "
+
+msgid "Configuration"
+msgstr "Configuração"
+
+msgid "Curl is currently not installed."
+msgstr "O cURL não está instalado."
+
+msgid "Device"
+msgstr "Dispositivo"
+
+msgid "Disabled"
+msgstr "Desabilitado"
+
+msgid "DynaPoint"
+msgstr "DynaPoint"
+
+msgid "Dynamic Access Point Manager"
+msgstr "Gerenciamento do Ponto de Acesso Dinâmico"
+
+msgid "Enabled"
+msgstr "Habilitado"
+
+msgid ""
+"Failure counter after how many failed download attempts, the state is "
+"considered as offline"
+msgstr "Numero de falhar para considerar como inalcançável"
+
+msgid "List of Wireless Virtual Interfaces (wVIF)"
+msgstr "Lista de Interfaces Virtuais Wireless (wVIF)"
+
+msgid "List of host addresses"
+msgstr "Lista de endereços dos equipamentos"
+
+msgid ""
+"List of host addresses (url or IP) to track and request http headers from"
+msgstr ""
+"Lista de endereços dos equipamentos (URL ou endereço IP) para requisitar "
+"cabeçalhos HTTP"
+
+msgid "Mode"
+msgstr "Modo"
+
+msgid "Not used by DynaPoint"
+msgstr "Não usado pelo DynaPoint"
+
+msgid "Offline"
+msgstr "Desconectado"
+
+msgid "Online"
+msgstr "Conectado"
+
+msgid "SSID"
+msgstr "SSID"
+
+msgid "Switch_to_offline threshold"
+msgstr "Limiar para mudar para desconectado"
+
+msgid "Test-run interval"
+msgstr "Intervalo para execução do teste"
+
+msgid "Time interval in seconds to re-start a new test run"
+msgstr "Intervalo, em segundos, para reiniciar um nova execução do teste"
+
+msgid "Use curl"
+msgstr "Usar cURL"
+
+msgid "Use curl instead of wget"
+msgstr "Usar cURL ao invés do wget"
+
+msgid "Use curl instead of wget for testing the connectivity."
+msgstr "Usar cURL ao invés do wget para testar a conectividade."
+
+msgid "Used interface"
+msgstr "Dispositivos usadas"
+
+msgid "Which interface should curl use. (Use ifconfig to find out)"
+msgstr "Qual dispositivo o cURL deve usar. (Use ifconfig para listá-las)"
+
+msgid "WiFi Status"
+msgstr "Estado da WiFi"
--- /dev/null
+msgid ""
+msgstr "Content-Type: text/plain; charset=UTF-8"
+
+msgid "Activate this wVIF if status is:"
+msgstr ""
+
+msgid "Append hostname to ssid"
+msgstr ""
+
+msgid "Append the router's hostname to the SSID when connectivity check fails"
+msgstr ""
+
+msgid "Check Internet connectivity via HTTP header download"
+msgstr ""
+
+msgid "Configuration"
+msgstr ""
+
+msgid "Curl is currently not installed."
+msgstr ""
+
+msgid "Device"
+msgstr ""
+
+msgid "Disabled"
+msgstr ""
+
+msgid "DynaPoint"
+msgstr ""
+
+msgid "Dynamic Access Point Manager"
+msgstr ""
+
+msgid "Enabled"
+msgstr ""
+
+msgid ""
+"Failure counter after how many failed download attempts, the state is "
+"considered as offline"
+msgstr ""
+
+msgid "List of Wireless Virtual Interfaces (wVIF)"
+msgstr ""
+
+msgid "List of host addresses"
+msgstr ""
+
+msgid ""
+"List of host addresses (url or IP) to track and request http headers from"
+msgstr ""
+
+msgid "Mode"
+msgstr ""
+
+msgid "Not used by DynaPoint"
+msgstr ""
+
+msgid "Offline"
+msgstr ""
+
+msgid "Online"
+msgstr ""
+
+msgid "SSID"
+msgstr ""
+
+msgid "Switch_to_offline threshold"
+msgstr ""
+
+msgid "Test-run interval"
+msgstr ""
+
+msgid "Time interval in seconds to re-start a new test run"
+msgstr ""
+
+msgid "Use curl"
+msgstr ""
+
+msgid "Use curl instead of wget"
+msgstr ""
+
+msgid "Use curl instead of wget for testing the connectivity."
+msgstr ""
+
+msgid "Used interface"
+msgstr ""
+
+msgid "Which interface should curl use. (Use ifconfig to find out)"
+msgstr ""
+
+msgid "WiFi Status"
+msgstr ""
--- /dev/null
+#!/bin/sh
+
+# needed for "Save and Apply" to restart dynapoint
+uci -q batch <<-EOF >/dev/null
+ delete ucitrack.@dynapoint[-1]
+ add ucitrack dynapoint
+ set ucitrack.@dynapoint[-1].init="dynapoint"
+ commit dynapoint
+EOF
+
+rm -f /tmp/luci-indexcache
+exit 0
+
--- /dev/null
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+LUCI_TITLE:=E2Guardian LuCI Interface
+LUCI_DEPENDS:=+luci-mod-admin-full +e2guardian
+
+PKG_MAINTAINER:=Marko Ratkaj <marko.ratkaj@sartura.hr>
+PKG_LICENSE:=Apache-2.0
+
+include ../../luci.mk
+
+# call BuildPackage - OpenWrt buildroot signature
--- /dev/null
+--[[
+
+LuCI E2Guardian module
+
+Copyright (C) 2015, Itus Networks, Inc.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Author: Marko Ratkaj <marko.ratkaj@sartura.hr>
+ Luka Perkov <luka.perkov@sartura.hr>
+
+]]--
+
+module("luci.controller.e2guardian", package.seeall)
+
+function index()
+ entry({"admin", "services", "e2guardian"}, cbi("e2guardian"), _("E2Guardian"))
+end
--- /dev/null
+--[[
+
+LuCI E2Guardian module
+
+Copyright (C) 2015, Itus Networks, Inc.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Author: Marko Ratkaj <marko.ratkaj@sartura.hr>
+ Luka Perkov <luka.perkov@sartura.hr>
+
+]]--
+
+local fs = require "nixio.fs"
+local sys = require "luci.sys"
+
+m = Map("e2guardian", translate("E2Guardian"))
+m.on_after_commit = function() luci.sys.call("/etc/init.d/e2guardian restart") end
+
+s = m:section(TypedSection, "e2guardian")
+s.anonymous = true
+s.addremove = false
+
+s:tab("tab_general", translate("General Settings"))
+s:tab("tab_additional", translate("Additional Settings"))
+s:tab("tab_logs", translate("Logs"))
+
+
+----------------- General Settings Tab -----------------------
+
+filterip = s:taboption("tab_general", Value, "filterip", translate("IP that E2Guardian listens"))
+filterip.datatype = "ip4addr"
+
+filterports = s:taboption("tab_general", Value, "filterports", translate("Port that E2Guardian listens"))
+filterports.datatype = "portrange"
+filterports.placeholder = "0-65535"
+
+proxyip = s:taboption("tab_general", Value, "proxyip", translate("IP address of the proxy"))
+proxyip.datatype = "ip4addr"
+proxyip.default = "127.0.0.1"
+
+proxyport = s:taboption("tab_general", Value, "proxyport", translate("Port of the proxy"))
+proxyport.datatype = "portrange"
+proxyport.placeholder = "0-65535"
+
+languagedir = s:taboption("tab_general", Value, "languagedir", translate("Language dir"))
+languagedir.datatype = "string"
+languagedir.default = "/usr/share/e2guardian/languages"
+
+language = s:taboption("tab_general", Value, "language", translate("Language to use"))
+language.datatype = "string"
+language.default = "ukenglish"
+
+loglevel = s:taboption("tab_general", ListValue, "loglevel", translate("Logging Settings"))
+loglevel:value("0", translate("none"))
+loglevel:value("1", translate("just denied"))
+loglevel:value("2", translate("all text based"))
+loglevel:value("3", translate("all requests"))
+loglevel.default = "2"
+
+logexceptionhits = s:taboption("tab_general", ListValue, "logexceptionhits", translate("Log Exception Hits"))
+logexceptionhits:value("0", translate("never"))
+logexceptionhits:value("1", translate("log, but don't mark as exceptions"))
+logexceptionhits:value("2", translate("log and mark"))
+logexceptionhits.default = "2"
+
+logfileformat = s:taboption("tab_general", ListValue, "logfileformat", translate("Log File Format"))
+logfileformat:value("1", translate("DansgGuardian format, space delimited"))
+logfileformat:value("2", translate("CSV-style format"))
+logfileformat:value("3", translate("Squid Log File Format"))
+logfileformat:value("4", translate("Tab delimited"))
+logfileformat:value("5", translate("Protex format"))
+logfileformat:value("6", translate("Protex format with server field blanked"))
+logfileformat.default = "1"
+
+accessdeniedaddress = s:taboption("tab_general", Value, "accessdeniedaddress", translate("Access denied address"),
+translate("Server to which the cgi e2guardian reporting script was copied. Reporting levels 1 and 2 only"))
+accessdeniedaddress.datatype = "string"
+accessdeniedaddress.default = "http://YOURSERVER.YOURDOMAIN/cgi-bin/e2guardian.pl"
+
+usecustombannedimage = s:taboption("tab_general", ListValue, "usecustombannedimage", translate("Banned image replacement"))
+usecustombannedimage:value("on", translate("Yes"))
+usecustombannedimage:value("off", translate("No"))
+usecustombannedimage.default = "on"
+
+custombannedimagefile = s:taboption("tab_general", Value, "custombannedimagefile", translate("Custom banned image file"))
+custombannedimagefile.datatype = "string"
+custombannedimagefile.default = "/usr/share/e2guardian/transparent1x1.gif"
+
+usecustombannedflash = s:taboption("tab_general", ListValue, "usecustombannedflash", translate("Banned flash replacement"))
+usecustombannedflash:value("on", translate("Yes"))
+usecustombannedflash:value("off", translate("No"))
+usecustombannedflash.default = "on"
+
+custombannedflashfile = s:taboption("tab_general", Value, "custombannedflashfile", translate("Custom banned flash file"))
+custombannedflashfile.datatype = "string"
+custombannedflashfile.default = "/usr/share/e2guardian/blockedflash.swf"
+
+filtergroups = s:taboption("tab_general", Value, "filtergroups", translate("Number of filter groups"))
+filtergroups.datatype = "and(uinteger,min(1))"
+filtergroups.default = "1"
+
+filtergroupslist = s:taboption("tab_general", Value, "filtergroupslist", translate("List of filter groups"))
+filtergroupslist.datatype = "string"
+filtergroupslist.default = "/etc/e2guardian/lists/filtergroupslist"
+
+bannediplist = s:taboption("tab_general", Value, "bannediplist", translate("List of banned IPs"))
+bannediplist.datatype = "string"
+bannediplist.default = "/etc/e2guardian/lists/bannediplist"
+
+exceptioniplist = s:taboption("tab_general", Value, "exceptioniplist", translate("List of IP exceptions"))
+exceptioniplist.datatype = "string"
+exceptioniplist.default = "/etc/e2guardian/lists/exceptioniplist"
+
+perroomblockingdirectory = s:taboption("tab_general", Value, "perroomblockingdirectory", translate("Per-Room blocking definition directory"))
+perroomblockingdirectory.datatype = "string"
+perroomblockingdirectory.default = "/etc/e2guardian/lists/bannedrooms/"
+
+showweightedfound = s:taboption("tab_general", ListValue, "showweightedfound", translate("Show weighted phrases found"))
+showweightedfound:value("on", translate("Yes"))
+showweightedfound:value("off", translate("No"))
+showweightedfound.default = "on"
+
+weightedphrasemode = s:taboption("tab_general", ListValue, "weightedphrasemode", translate("Weighted phrase mode"))
+weightedphrasemode:value("0", translate("off"))
+weightedphrasemode:value("1", translate("on, normal operation"))
+weightedphrasemode:value("2", translate("on, phrase found only counts once on a page"))
+weightedphrasemode.default = "2"
+
+urlcachenumber = s:taboption("tab_general", Value, "urlcachenumber", translate("Clean result caching for URLs"))
+urlcachenumber.datatype = "and(uinteger,min(0))"
+urlcachenumber.default = "1000"
+
+urlcacheage = s:taboption("tab_general", Value, "urlcacheage", translate("Age before they should be ignored in seconds"))
+urlcacheage.datatype = "and(uinteger,min(0))"
+urlcacheage.default = "900"
+
+scancleancache = s:taboption("tab_general", ListValue, "scancleancache", translate("Cache for content (AV) scans as 'clean'"))
+scancleancache:value("on", translate("Yes"))
+scancleancache:value("off", translate("No"))
+scancleancache.default = "on"
+
+phrasefiltermode = s:taboption("tab_general", ListValue, "phrasefiltermode", translate("Filtering options"))
+phrasefiltermode:value("0", translate("raw"))
+phrasefiltermode:value("1", translate("smart"))
+phrasefiltermode:value("2", translate("both raw and smart"))
+phrasefiltermode:value("3", translate("meta/title"))
+phrasefiltermode.default = "2"
+
+preservecase = s:taboption("tab_general", ListValue, "perservecase", translate("Lower caseing options"))
+preservecase:value("0", translate("force lower case"))
+preservecase:value("1", translate("don't change"))
+preservecase:value("2", translate("scan fist in lower, then in original"))
+preservecase.default = "0"
+
+hexdecodecontent = s:taboption("tab_general", ListValue, "hexdecodecontent", translate("Hex decoding options"))
+hexdecodecontent:value("on", translate("Yes"))
+hexdecodecontent:value("off", translate("No"))
+hexdecodecontent.default = "off"
+
+forcequicksearch = s:taboption("tab_general", ListValue, "forcequicksearch", translate("Quick search"))
+forcequicksearch:value("on", translate("Yes"))
+forcequicksearch:value("off", translate("No"))
+forcequicksearch.default = "off"
+
+reverseaddresslookups= s:taboption("tab_general", ListValue, "reverseaddresslookups", translate("Reverse lookups for banned site and URLs"))
+reverseaddresslookups:value("on", translate("Yes"))
+reverseaddresslookups:value("off", translate("No"))
+reverseaddresslookups.default = "off"
+
+reverseclientiplookups = s:taboption("tab_general", ListValue, "reverseclientiplookups", translate("Reverse lookups for banned and exception IP lists"))
+reverseclientiplookups:value("on", translate("Yes"))
+reverseclientiplookups:value("off", translate("No"))
+reverseclientiplookups.default = "off"
+
+logclienthostnames = s:taboption("tab_general", ListValue, "logclienthostnames", translate("Perform reverse lookups on client IPs for successful requests"))
+logclienthostnames:value("on", translate("Yes"))
+logclienthostnames:value("off", translate("No"))
+logclienthostnames.default = "off"
+
+createlistcachefiles = s:taboption("tab_general", ListValue, "createlistcachefiles", translate("Build bannedsitelist and bannedurllist cache files"))
+createlistcachefiles:value("on",translate("Yes"))
+createlistcachefiles:value("off",translate("No"))
+createlistcachefiles.default = "on"
+
+prefercachedlists = s:taboption("tab_general", ListValue, "prefercachedlists", translate("Prefer cached list files"))
+prefercachedlists:value("on", translate("Yes"))
+prefercachedlists:value("off", translate("No"))
+prefercachedlists.default = "off"
+
+maxuploadsize = s:taboption("tab_general", Value, "maxuploadsize", translate("Max upload size (in Kbytes)"))
+maxuploadsize:value("-1", translate("no blocking"))
+maxuploadsize:value("0", translate("complete block"))
+maxuploadsize.default = "-1"
+
+maxcontentfiltersize = s:taboption("tab_general", Value, "maxcontentfiltersize", translate("Max content filter size"),
+translate("The value must not be higher than max content ram cache scan size or 0 to match it"))
+maxcontentfiltersize.datatype = "and(uinteger,min(0))"
+maxcontentfiltersize.default = "256"
+
+maxcontentramcachescansize = s:taboption("tab_general", Value, "maxcontentramcachescansize", translate("Max content ram cache scan size"),
+translate("This is the max size of file that DG will download and cache in RAM"))
+maxcontentramcachescansize.datatype = "and(uinteger,min(0))"
+maxcontentramcachescansize.default = "2000"
+
+maxcontentfilecachescansize = s:taboption("tab_general", Value, "maxcontentfilecachescansize", translate("Max content file cache scan size"))
+maxcontentfilecachescansize.datatype = "and(uinteger,min(0))"
+maxcontentfilecachescansize.default = "20000"
+
+proxytimeout = s:taboption("tab_general", Value, "proxytimeout", translate("Proxy timeout (5-100)"))
+proxytimeout.datatype = "range(5,100)"
+proxytimeout.default = "20"
+
+proxyexchange = s:taboption("tab_general", Value, "proxyexchange", translate("Proxy header excahnge (20-300)"))
+proxyexchange.datatype = "range(20,300)"
+proxyexchange.default = "20"
+
+pcontimeout = s:taboption("tab_general", Value, "pcontimeout", translate("Pconn timeout"),
+translate("How long a persistent connection will wait for other requests"))
+pcontimeout.datatype = "range(5,300)"
+pcontimeout.default = "55"
+
+filecachedir = s:taboption("tab_general", Value, "filecachedir", translate("File cache directory"))
+filecachedir.datatype = "string"
+filecachedir.default = "/tmp"
+
+deletedownloadedtempfiles = s:taboption("tab_general", ListValue, "deletedownloadedtempfiles", translate("Delete file cache after user completes download"))
+deletedownloadedtempfiles:value("on", translate("Yes"))
+deletedownloadedtempfiles:value("off", translate("No"))
+deletedownloadedtempfiles.default = "on"
+
+initialtrickledelay = s:taboption("tab_general", Value, "initialtrickledelay", translate("Initial Trickle delay"),
+translate("Number of seconds a browser connection is left waiting before first being sent *something* to keep it alive"))
+initialtrickledelay.datatype = "and(uinteger,min(0))"
+initialtrickledelay.default = "20"
+
+trickledelay = s:taboption("tab_general", Value, "trickledelay", translate("Trickle delay"),
+translate("Number of seconds a browser connection is left waiting before being sent more *something* to keep it alive"))
+trickledelay.datatype = "and(uinteger,min(0))"
+trickledelay.default = "10"
+
+downloadmanager = s:taboption("tab_general", Value, "downloadmanager", translate("Download manager"))
+downloadmanager.datatype = "string"
+downloadmanager.default = "/etc/e2guardian/downloadmanagers/default.conf"
+
+contentscannertimeout = s:taboption("tab_general", Value, "contentscannertimeout", translate("Content scanner timeout"))
+contentscannertimeout.datatype = "and(uinteger,min(0))"
+contentscannertimeout.default = "60"
+
+contentscanexceptions = s:taboption("tab_general", ListValue, "contentscanexceptions", translate("Content scan exceptions"))
+contentscanexceptions:value("on", translate("Yes"))
+contentscanexceptions:value("off", translate("No"))
+contentscanexceptions.default = "off"
+
+recheckreplacedurls = s:taboption("tab_general", ListValue, "recheckreplacedurls", translate("e-check replaced URLs"))
+recheckreplacedurls:value("on", translate("Yes"))
+recheckreplacedurls:value("off", translate("No"))
+recheckreplacedurls.default = "off"
+
+forwardedfor = s:taboption("tab_general", ListValue, "forwardedfor", translate("Misc setting: forwardedfor"),
+translate("If on, it may help solve some problem sites that need to know the source ip."))
+forwardedfor:value("on", translate("Yes"))
+forwardedfor:value("off", translate("No"))
+forwardedfor.default = "off"
+
+usexforwardedfor = s:taboption("tab_general", ListValue, "usexforwardedfor", translate("Misc setting: usexforwardedfor"),
+translate("This is for when you have squid between the clients and E2Guardian"))
+usexforwardedfor:value("on", translate("Yes"))
+usexforwardedfor:value("off", translate("No"))
+usexforwardedfor.default = "off"
+
+logconnectionhandlingerrors = s:taboption("tab_general", ListValue, "logconnectionhandlingerrors", translate("Log debug info about log()ing and accept()ing"))
+logconnectionhandlingerrors:value("on", translate("Yes"))
+logconnectionhandlingerrors:value("off", translate("No"))
+logconnectionhandlingerrors.default = "on"
+
+logchildprocesshandling = s:taboption("tab_general", ListValue, "logchildprocesshandling", translate("Log child process handling"))
+logchildprocesshandling:value("on", translate("Yes"))
+logchildprocesshandling:value("off", translate("No"))
+logchildprocesshandling.default = "off"
+
+maxchildren = s:taboption("tab_general", Value, "maxchildren", translate("Max number of processes to spawn"))
+maxchildren.datatype = "and(uinteger,min(0))"
+maxchildren.default = "180"
+
+minchildren = s:taboption("tab_general", Value, "minchildren", translate("Min number of processes to spawn"))
+minchildren.datatype = "and(uinteger,min(0))"
+minchildren.default = "20"
+
+minsparechildren = s:taboption("tab_general", Value, "minsparechildren", translate("Min number of processes to keep ready"))
+minsparechildren.datatype = "and(uinteger,min(0))"
+minsparechildren.default = "16"
+
+preforkchildren = s:taboption("tab_general", Value, "preforkchildren", translate("Sets minimum nuber of processes when it runs out"))
+preforkchildren.datatype = "and(uinteger,min(0))"
+preforkchildren.default = "10"
+
+maxsparechildren = s:taboption("tab_general", Value, "maxsparechildren", translate("Sets the maximum number of processes to have doing nothing"))
+maxsparechildren.datatype = "and(uinteger,min(0))"
+maxsparechildren.default = "32"
+
+maxagechildren = s:taboption("tab_general", Value, "maxagechildren", translate("Max age of child process"))
+maxagechildren.datatype = "and(uinteger,min(0))"
+maxagechildren.default = "500"
+
+maxips = s:taboption("tab_general", Value, "maxips", translate("Max number of clinets allowed to connect"))
+maxips:value("0", translate("no limit"))
+maxips.default = "0"
+
+ipipcfilename = s:taboption("tab_general", Value, "ipipcfilename", translate("IP list IPC server directory and filename"))
+ipipcfilename.datatype = "string"
+ipipcfilename.default = "/tmp/.dguardianipc"
+
+urlipcfilename = s:taboption("tab_general", Value, "urlipcfilename", translate("Defines URL list IPC server directory and filename used to communicate with the URL cache process"))
+urlipcfilename.datatype = "string"
+urlipcfilename.default = "/tmp/.dguardianurlipc"
+
+ipcfilename = s:taboption("tab_general", Value, "ipcfilename", translate("Defines URL list IPC server directory and filename used to communicate with the URL cache process"))
+ipcfilename.datatype = "string"
+ipcfilename.default = "/tmp/.dguardianipipc"
+
+nodeamon = s:taboption("tab_general", ListValue, "nodeamon", translate("Disable deamoning"))
+nodeamon:value("on", translate("Yes"))
+nodeamon:value("off", translate("No"))
+nodeamon.default = "off"
+
+nologger = s:taboption("tab_general", ListValue, "nologger", translate("Disable logger"))
+nologger:value("on", translate("Yes"))
+nologger:value("off", translate("No"))
+nologger.default = "off"
+
+logadblock = s:taboption("tab_general", ListValue, "logadblock", translate("Enable logging of ADs"))
+logadblock:value("on", translate("Yes"))
+logadblock:value("off", translate("No"))
+logadblock.default = "off"
+
+loguseragent = s:taboption("tab_general", ListValue, "loguseragent", translate("Enable logging of client user agent"))
+loguseragent:value("on", translate("Yes"))
+loguseragent:value("off", translate("No"))
+loguseragent.default = "off"
+
+softrestart = s:taboption("tab_general", ListValue, "softrestart", translate("Enable soft restart"))
+softrestart:value("on", translate("Yes"))
+softrestart:value("off", translate("No"))
+softrestart.default = "off"
+
+
+------------------------ Additional Settings Tab ----------------------------
+
+e2guardian_config_file = s:taboption("tab_additional", TextValue, "_data", "")
+e2guardian_config_file.wrap = "off"
+e2guardian_config_file.rows = 25
+e2guardian_config_file.rmempty = false
+
+function e2guardian_config_file.cfgvalue()
+ local uci = require "luci.model.uci".cursor_state()
+ file = "/etc/e2guardian/e2guardianf1.conf"
+ if file then
+ return fs.readfile(file) or ""
+ else
+ return ""
+ end
+end
+
+function e2guardian_config_file.write(self, section, value)
+ if value then
+ local uci = require "luci.model.uci".cursor_state()
+ file = "/etc/e2guardian/e2guardianf1.conf"
+ fs.writefile(file, value:gsub("\r\n", "\n"))
+ end
+end
+
+
+---------------------------- Logs Tab -----------------------------
+
+e2guardian_logfile = s:taboption("tab_logs", TextValue, "lines", "")
+e2guardian_logfile.wrap = "off"
+e2guardian_logfile.rows = 25
+e2guardian_logfile.rmempty = true
+
+function e2guardian_logfile.cfgvalue()
+ local uci = require "luci.model.uci".cursor_state()
+ file = "/tmp/e2guardian/access.log"
+ if file then
+ return fs.readfile(file) or ""
+ else
+ return "Can't read log file"
+ end
+end
+
+function e2guardian_logfile.write()
+ return ""
+end
+
+return m
function o.write(self, section, value)
value = value:gsub("\r\n?", "\n")
fs.writefile("/etc/firewall.user", value)
+ require("luci.sys").call("/etc/init.d/firewall restart >/dev/null 2<&1")
+ require("nixio").syslog('info', 'Restarting firewall on custom /etc/firewall.user change')
end
+f.submit = translate("Restart Firewall")
+
return f
translate("Source IP address"),
translate("Only match incoming traffic from this IP or range."))
o.rmempty = true
-o.datatype = "neg(ip4addr)"
+o.datatype = "neg(ipmask4)"
o.placeholder = translate("any")
luci.sys.net.ipv4_hints(function(ip, name)
o.rmempty = true
-o.datatype = "neg(ip4addr)"
+o.datatype = "neg(ipmask4)"
o.placeholder = translate("any")
o = s:option(Value, "dest_ip", translate("Internal IP address"),
translate("Redirect matched incoming traffic to the specified \
internal host"))
-o.datatype = "ip4addr"
+o.datatype = "ipmask4"
luci.sys.net.ipv4_hints(function(ip, name)
o:value(ip, "%s (%s)" %{ ip, name })
o = s:option(Value, "src_ip", translate("Source IP address"))
o.rmempty = true
- o.datatype = "neg(ipaddr)"
+ o.datatype = "neg(ipmask4)"
o.placeholder = translate("any")
luci.sys.net.ipv4_hints(function(ip, name)
o = s:option(Value, "dest_ip", translate("Destination IP address"))
- o.datatype = "neg(ip4addr)"
+ o.datatype = "neg(ipmask4)"
luci.sys.net.ipv4_hints(function(ip, name)
o:value(ip, "%s (%s)" %{ ip, name })
o = s:option(Value, "src_ip", translate("Source address"))
- o.datatype = "neg(ipaddr)"
+ o.datatype = "neg(ipmask)"
o.placeholder = translate("any")
luci.sys.net.ipv4_hints(function(ip, name)
o = s:option(Value, "dest_ip", translate("Destination address"))
- o.datatype = "neg(ipaddr)"
+ o.datatype = "neg(ipmask)"
o.placeholder = translate("any")
luci.sys.net.ipv4_hints(function(ip, name)
translate("Restrict Masquerading to given source subnets"))
msrc.optional = true
-msrc.datatype = "list(neg(or(uciname,hostname,ip4addr)))"
+msrc.datatype = "list(neg(or(uciname,hostname,ipmask4)))"
msrc.placeholder = "0.0.0.0/0"
msrc:depends("family", "")
msrc:depends("family", "ipv4")
translate("Restrict Masquerading to given destination subnets"))
mdest.optional = true
-mdest.datatype = "list(neg(or(uciname,hostname,ip4addr)))"
+mdest.datatype = "list(neg(or(uciname,hostname,ipmask4)))"
mdest.placeholder = "0.0.0.0/0"
mdest:depends("family", "")
mdest:depends("family", "ipv4")
s:option(Flag, "syn_flood", translate("Enable SYN-flood protection"))
o = s:option(Flag, "drop_invalid", translate("Drop invalid packets"))
-o.default = o.enabled
p = {
s:option(ListValue, "input", translate("Input")),
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "Redirigeix trànsit entrant coincidit al host intern especificat"
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr "Restringeix la mascarada a les subxarxes de destí donades"
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "Přesměrovat vybraný příchozí provoz na uvedeného vnitřního hostitele."
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr "Omezit maškarádování na uvedené cílové podsítě"
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "Gefilterte Verbindungen an den angegeben internen Host weiterleiten"
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr "NAT auf die angegebenen Ziel-Subnetze beschränken"
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr ""
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr ""
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "Redirect matched incoming traffic to the specified internal host"
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr ""
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "Redirigir el tráfico de entrada que coincida a la máquina interna"
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr "Restringir enmascaramiento a las subredes destino"
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "Rediriger le trafic entrant correspondant vers l'hôte interne spécifié"
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr ""
"Restreindre la substitution d'adresses (Masquerade) à ces sous-réseaux "
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr ""
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr ""
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "Átirányítja az egyező bejövő forgalmat a megadott belső géphez"
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr "Álcázás korlátozása a megadott cél alhálózatokra"
msgid ""
"Port forwarding allows remote computers on the Internet to connect to a "
"specific computer or service within the private LAN."
-msgstr "L'inoltro delle porte permette ai computer in remoto su Internet di"
-"connettersi a uno specifico computer o servizio presente nella tua LAN privata"
+msgstr ""
+"L'inoltro delle porte permette ai computer in remoto su Internet "
+"diconnettersi a uno specifico computer o servizio presente nella tua LAN "
+"privata"
msgid "Protocol"
msgstr "Protocollo"
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr ""
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr ""
msgid ""
"The firewall creates zones over your network interfaces to control network "
"traffic flow."
-msgstr "Il firewall crea delle zone nelle tue interfacce di rete per controllare"
-"il flusso del traffico."
+msgstr ""
+"Il firewall crea delle zone nelle tue interfacce di rete per controllareil "
+"flusso del traffico."
msgid ""
"The options below control the forwarding policies between this zone (%s) and "
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2012-11-14 17:32+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
+"PO-Revision-Date: 2016-12-24 02:55+0900\n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
"Language: ja\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
+"Language-Team: \n"
msgid "%s in %s"
-msgstr ""
+msgstr "%s (%s)"
msgid "%s%s with %s"
msgstr "%s%s ,%s"
msgid "%s, %s in %s"
-msgstr ""
+msgstr "%s, %s (%s)"
msgid "(Unnamed Entry)"
msgstr "(名前設定の無いエントリー)"
msgstr "転送"
msgid "Forward to"
-msgstr ""
+msgstr "転送先"
msgid "Friday"
-msgstr ""
+msgstr "金曜日"
msgid "From %s in %s"
msgstr "送信元 %s (%s)"
msgstr "マスカレード"
msgid "Match"
-msgstr ""
+msgstr "対象"
msgid "Match ICMP type"
msgstr "ICMPタイプの一致"
"フィックと一致したトラフィックが対象になります。"
msgid "Monday"
-msgstr ""
+msgstr "月曜日"
msgid "Month Days"
-msgstr ""
+msgstr "月間"
msgid "Name"
msgstr "名前"
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "ルールに一致した受信トラフィックを、設定された内部ホストへ転送します"
+msgid "Restart Firewall"
+msgstr "ファイアウォールの再起動"
+
msgid "Restrict Masquerading to given destination subnets"
msgstr "設定された宛先サブネットへのマスカレードを制限する"
msgstr "SNAT ポート"
msgid "Saturday"
-msgstr ""
+msgstr "土曜日"
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua #
msgstr "送信元ゾーン"
msgid "Start Date (yyyy-mm-dd)"
-msgstr ""
+msgstr "開始日 (yyyy-mm-dd)"
msgid "Start Time (hh:mm:ss)"
-msgstr ""
+msgstr "開始時刻 (hh:mm:ss)"
msgid "Stop Date (yyyy-mm-dd)"
-msgstr ""
+msgstr "停止日 (yyyy-mm-dd)"
msgid "Stop Time (hh:mm:ss)"
-msgstr ""
+msgstr "停止時刻 (hh:mm:ss)"
msgid "Sunday"
-msgstr ""
+msgstr "日曜日"
msgid ""
"The firewall creates zones over your network interfaces to control network "
"このページでは、各トラフィックルールの送信元・宛先ホストの設定などの詳細設定"
"を行うことができます。"
-#, fuzzy
msgid ""
"This section defines common properties of %q. The <em>input</em> and "
"<em>output</em> options set the default policies for traffic entering and "
"のゾーンに属するかを設定します。"
msgid "Thursday"
-msgstr ""
+msgstr "木曜日"
msgid "Time in UTC"
-msgstr ""
+msgstr "UTC時刻を使用"
msgid "To %s at %s on <var>this device</var>"
msgstr "宛先 %s, %s (<var>デバイス</var>)"
"設定することができます。"
msgid "Tuesday"
-msgstr ""
+msgstr "火曜日"
msgid "Via %s"
-msgstr ""
+msgstr "経由 %s"
msgid "Via %s at %s"
-msgstr ""
+msgstr "経由 %s , %s"
msgid "Wednesday"
-msgstr ""
+msgstr "水曜日"
msgid "Week Days"
-msgstr ""
+msgstr "曜日"
msgid ""
"You may specify multiple by selecting \"-- custom --\" and then entering "
msgstr "拒否"
msgid "traffic"
-msgstr ""
+msgstr "トラフィック"
--- /dev/null
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2010-03-30 17:00+0200\n"
+"PO-Revision-Date: 2012-11-14 17:32+0200\n"
+"Last-Translator: Weongyo Jeong <weongyo@gmail.com>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: ko\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Pootle 2.0.6\n"
+
+msgid "%s in %s"
+msgstr ""
+
+msgid "%s%s with %s"
+msgstr "%s%s ,%s"
+
+msgid "%s, %s in %s"
+msgstr ""
+
+msgid "(Unnamed Entry)"
+msgstr ""
+
+msgid "(Unnamed Rule)"
+msgstr ""
+
+msgid "(Unnamed SNAT)"
+msgstr ""
+
+msgid "<var>%d</var> pkts. per <var>%s</var>"
+msgstr ""
+
+msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
+msgstr ""
+
+msgid "<var>%s</var> and limit to %s"
+msgstr ""
+
+msgid "Action"
+msgstr ""
+
+msgid "Add"
+msgstr ""
+
+msgid "Add and edit..."
+msgstr "추가 후 수정..."
+
+msgid "Advanced Settings"
+msgstr ""
+
+msgid "Allow forward from <em>source zones</em>:"
+msgstr "<em>Source zone</em> 로부터의 forward 허용:"
+
+msgid "Allow forward to <em>destination zones</em>:"
+msgstr "<em>Destination zone</em> 으로 forward 허용:"
+
+msgid "Any"
+msgstr ""
+
+msgid "Covered networks"
+msgstr ""
+
+msgid "Custom Rules"
+msgstr "Custom Rule"
+
+msgid ""
+"Custom rules allow you to execute arbritary iptables commands which are not "
+"otherwise covered by the firewall framework. The commands are executed after "
+"each firewall restart, right after the default ruleset has been loaded."
+msgstr ""
+"Custom rule 은 방화벽 UI 로 해결이 되지 않는 임의의 iptables 명령을 실행할 "
+"수 있도록 합니다. 입력된 명령어들은 매 방화벽 재시작시 실행되는데 default "
+"ruleset 이 load 된 후 시점입니다."
+
+msgid "Destination IP address"
+msgstr "Destination IP 주소"
+
+msgid "Destination address"
+msgstr "Destination 주소"
+
+msgid "Destination port"
+msgstr ""
+
+msgid "Destination zone"
+msgstr ""
+
+msgid "Do not rewrite"
+msgstr ""
+
+msgid "Drop invalid packets"
+msgstr ""
+
+msgid "Enable"
+msgstr "활성화"
+
+msgid "Enable NAT Loopback"
+msgstr "NAT Loopback 활성화"
+
+msgid "Enable SYN-flood protection"
+msgstr "SYN-flood protection 활성화"
+
+msgid "Enable logging on this zone"
+msgstr "zone 의 logging 활성화"
+
+msgid "External IP address"
+msgstr "외부 IP 주소"
+
+msgid "External port"
+msgstr "외부 port"
+
+msgid "External zone"
+msgstr "외부 zone"
+
+msgid "Extra arguments"
+msgstr "추가 argument"
+
+msgid "Firewall"
+msgstr "방화벽"
+
+msgid "Firewall - Custom Rules"
+msgstr "방화벽 - Custom Rules"
+
+msgid "Firewall - Port Forwards"
+msgstr "방화벽 - Port Forwards"
+
+msgid "Firewall - Traffic Rules"
+msgstr "방화벽 - Traffic Rules"
+
+msgid "Firewall - Zone Settings"
+msgstr "방화벽 - Zone 설정"
+
+msgid "Force connection tracking"
+msgstr ""
+
+msgid "Forward"
+msgstr ""
+
+msgid "Forward to"
+msgstr ""
+
+msgid "Friday"
+msgstr "금요일"
+
+msgid "From %s in %s"
+msgstr ""
+
+msgid "From %s in %s with source %s"
+msgstr ""
+
+msgid "From %s in %s with source %s and %s"
+msgstr ""
+
+msgid "General Settings"
+msgstr ""
+
+msgid "IPv4"
+msgstr ""
+
+msgid "IPv4 and IPv6"
+msgstr ""
+
+msgid "IPv4 only"
+msgstr ""
+
+msgid "IPv6"
+msgstr ""
+
+msgid "IPv6 only"
+msgstr ""
+
+msgid "Input"
+msgstr ""
+
+msgid "Inter-Zone Forwarding"
+msgstr ""
+
+msgid "Internal IP address"
+msgstr "내부 IP 주소"
+
+msgid "Internal port"
+msgstr "내부 port"
+
+msgid "Internal zone"
+msgstr "내부 zone"
+
+msgid "Limit log messages"
+msgstr ""
+
+msgid "MSS clamping"
+msgstr ""
+
+msgid "Masquerading"
+msgstr ""
+
+msgid "Match"
+msgstr ""
+
+msgid "Match ICMP type"
+msgstr ""
+
+msgid "Match forwarded traffic to the given destination port or port range."
+msgstr ""
+
+msgid ""
+"Match incoming traffic directed at the given destination port or port range "
+"on this host"
+msgstr ""
+
+msgid ""
+"Match incoming traffic originating from the given source port or port range "
+"on the client host."
+msgstr ""
+
+msgid "Monday"
+msgstr "월요일"
+
+msgid "Month Days"
+msgstr ""
+
+msgid "Name"
+msgstr "이름"
+
+msgid "New SNAT rule"
+msgstr "새로운 SNAT rule"
+
+msgid "New forward rule"
+msgstr "새로운 forward rule"
+
+msgid "New input rule"
+msgstr "새로운 input rule"
+
+msgid "New port forward"
+msgstr "새로운 port forward"
+
+msgid "New source NAT"
+msgstr "새로운 source NAT"
+
+msgid "Only match incoming traffic directed at the given IP address."
+msgstr ""
+
+msgid "Only match incoming traffic from these MACs."
+msgstr ""
+
+msgid "Only match incoming traffic from this IP or range."
+msgstr ""
+
+msgid ""
+"Only match incoming traffic originating from the given source port or port "
+"range on the client host"
+msgstr ""
+
+msgid "Open ports on router"
+msgstr ""
+
+msgid "Other..."
+msgstr ""
+
+msgid "Output"
+msgstr ""
+
+msgid "Passes additional arguments to iptables. Use with care!"
+msgstr "iptables 명령에 추가 인자들을 더합니다. 조심해 사용하세요!"
+
+msgid "Port Forwards"
+msgstr "Port Forward"
+
+msgid ""
+"Port forwarding allows remote computers on the Internet to connect to a "
+"specific computer or service within the private LAN."
+msgstr ""
+"Port forwarding 기능은 인터넷 상의 원격 컴퓨터가 내부 LAN 에 속한 특정 컴퓨터"
+"나 서비스에 접속할 수 있도록 합니다."
+
+msgid "Protocol"
+msgstr ""
+
+msgid ""
+"Redirect matched incoming traffic to the given port on the internal host"
+msgstr ""
+
+msgid "Redirect matched incoming traffic to the specified internal host"
+msgstr ""
+
+msgid "Restart Firewall"
+msgstr ""
+
+msgid "Restrict Masquerading to given destination subnets"
+msgstr "주어진 destination subnet 으로 Masquerading 제한"
+
+msgid "Restrict Masquerading to given source subnets"
+msgstr "주어진 source subnet 으로 Masquerading 제한"
+
+msgid "Restrict to address family"
+msgstr "Address family 제한"
+
+msgid "Rewrite matched traffic to the given address."
+msgstr ""
+
+msgid ""
+"Rewrite matched traffic to the given source port. May be left empty to only "
+"rewrite the IP address."
+msgstr ""
+
+msgid "Rewrite to source %s"
+msgstr ""
+
+msgid "Rewrite to source %s, %s"
+msgstr ""
+
+msgid "SNAT IP address"
+msgstr ""
+
+msgid "SNAT port"
+msgstr ""
+
+msgid "Saturday"
+msgstr "토요일"
+
+msgid "Source IP address"
+msgstr "Source IP 주소"
+
+msgid "Source MAC address"
+msgstr "Source MAC 주소"
+
+msgid "Source NAT"
+msgstr ""
+
+msgid ""
+"Source NAT is a specific form of masquerading which allows fine grained "
+"control over the source IP used for outgoing traffic, for example to map "
+"multiple WAN addresses to internal subnets."
+msgstr ""
+"Source NAT 기능은 masquerading 의 한 형태로써 outgoing 트래픽이 사용할 "
+"source IP 를 세밀하게 제어할 수 있습니다. 예를 들어 다수의 WAN 주소들을 내"
+"부 subnet 에 매핑(mapping) 할 경우 사용됩니다."
+
+msgid "Source address"
+msgstr "Source 주소"
+
+msgid "Source port"
+msgstr ""
+
+msgid "Source zone"
+msgstr ""
+
+msgid "Start Date (yyyy-mm-dd)"
+msgstr "시작 날짜 (yyyy-mm-dd)"
+
+msgid "Start Time (hh:mm:ss)"
+msgstr "시작 시간 (hh:mm:ss)"
+
+msgid "Stop Date (yyyy-mm-dd)"
+msgstr "종료 날짜 (yyyy-mm-dd)"
+
+msgid "Stop Time (hh:mm:ss)"
+msgstr "종료 시간 (hh:mm:ss)"
+
+msgid "Sunday"
+msgstr "일요일"
+
+msgid ""
+"The firewall creates zones over your network interfaces to control network "
+"traffic flow."
+msgstr ""
+"방화벽 기능을 이용하여 네트워크 인터페이스와 연결된 zone 을 생성할 수 있고 이"
+"를 이용하여 네트워크 traffic flow 를 제어할 수 있습니다."
+
+msgid ""
+"The options below control the forwarding policies between this zone (%s) and "
+"other zones. <em>Destination zones</em> cover forwarded traffic "
+"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
+"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
+"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
+"<em>not</em> imply a permission to forward from wan to lan as well."
+msgstr ""
+"이 zone (%s) 과 다른 zone 들 사이의 forwarding 정책을 제어하는 옵션들입니다. "
+"<em>Destination zones</em> 은 <strong>%q 에서 출발한 </strong> forward "
+"traffic 을 뜻하고, <em>Source zones</em> 은 다른 zone 들에서 <strong>%q 로 전"
+"달되는</strong> forward traffic 을 뜻합니다. Forwarding rule 은 "
+"<em>unidirectional</em> 인데, 예를 들어 LAN 에서 WAN 으로의 forward 규칙이 "
+"WAN 에서 LAN 으로의 forward 를 허락하는 것이 아닙니다."
+
+msgid ""
+"This page allows you to change advanced properties of the port forwarding "
+"entry. In most cases there is no need to modify those settings."
+msgstr ""
+"이 메뉴에서는 port forwarding 의 고급 설정 정보를 변경할 수 있습니다. 대부분"
+"의 경우 이 설정을 수정할 일이 없습니다."
+
+msgid ""
+"This page allows you to change advanced properties of the traffic rule "
+"entry, such as matched source and destination hosts."
+msgstr ""
+"이 메뉴에서는 traffic rule 항목의 고급 설정, 예를 들어 source host 와 "
+"destination host 매칭, 을 변경할 수 있습니다."
+
+#, fuzzy
+msgid ""
+"This section defines common properties of %q. The <em>input</em> and "
+"<em>output</em> options set the default policies for traffic entering and "
+"leaving this zone while the <em>forward</em> option describes the policy for "
+"forwarded traffic between different networks within the zone. <em>Covered "
+"networks</em> specifies which available networks are members of this zone."
+msgstr ""
+"이 섹션은 %q 의 공통 속성을 설정할 수 있습니다. <em>input</em> 과 "
+"<em>output</em> 옵션은 이 zone 으로 전달되어 들오거나 나가는 트래픽에 대한 기"
+"본 정책을 뜻합니다. <em>forward</em> 옵션은 zone 내에서 다른 네트워크들 사이"
+"를 오가는 forward traffic 에 대한 정책을 뜻합니다. <em>Covered networks</em> "
+"에서는 zone 의 영향을 받을 네트워크들을 지정할 수 있습니다."
+
+msgid "Thursday"
+msgstr "목요일"
+
+msgid "Time in UTC"
+msgstr "UTC 기준시"
+
+msgid "To %s at %s on <var>this device</var>"
+msgstr ""
+
+msgid "To %s in %s"
+msgstr ""
+
+msgid "To %s on <var>this device</var>"
+msgstr ""
+
+msgid "To %s, %s in %s"
+msgstr ""
+
+msgid "To source IP"
+msgstr ""
+
+msgid "To source port"
+msgstr ""
+
+msgid "Traffic Rules"
+msgstr "Traffic Rule"
+
+msgid ""
+"Traffic rules define policies for packets traveling between different zones, "
+"for example to reject traffic between certain hosts or to open WAN ports on "
+"the router."
+msgstr ""
+"Traffic rule 은 서로 다른 zone 사이를 오가는 패킷들에 대한 정책을 정의합니"
+"다. 예를 들어 특정 host 들 사이의 트래픽을 차단하거나 공유기의 WAN port 를 "
+"open 할때 사용됩니다."
+
+msgid "Tuesday"
+msgstr "화요일"
+
+msgid "Via %s"
+msgstr ""
+
+msgid "Via %s at %s"
+msgstr ""
+
+msgid "Wednesday"
+msgstr "수요일"
+
+msgid "Week Days"
+msgstr "주일"
+
+msgid ""
+"You may specify multiple by selecting \"-- custom --\" and then entering "
+"protocols separated by space."
+msgstr ""
+
+msgid "Zone %q"
+msgstr ""
+
+msgid "Zone ⇒ Forwardings"
+msgstr ""
+
+msgid "Zones"
+msgstr "Zone 내역"
+
+msgid "accept"
+msgstr ""
+
+msgid "any"
+msgstr ""
+
+msgid "any host"
+msgstr ""
+
+msgid "any router IP"
+msgstr ""
+
+msgid "any zone"
+msgstr ""
+
+msgid "don't track"
+msgstr ""
+
+msgid "drop"
+msgstr ""
+
+msgid "reject"
+msgstr ""
+
+msgid "traffic"
+msgstr ""
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr ""
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr ""
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "Viderekoble matchet innkommende trafikk til den angitte interne vert"
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr "Begrens Masquerading til oppgitt destinasjons subnett"
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "Przekieruj ruch przychodzący do wskazanego hosta w sieci wewnętrznej"
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr "Ogranicz maskaradę do wskazanych sieci docelowych"
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2014-06-21 19:03+0200\n"
-"Last-Translator: Éder <eder.grigorio@openmailbox.org>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
+"PO-Revision-Date: 2017-02-20 17:43-0300\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
"Language: pt_BR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
+"Language-Team: \n"
msgid "%s in %s"
msgstr "%s in %s"
msgstr "Encaminhar para"
msgid "Friday"
-msgstr ""
+msgstr "Sexta-feira"
msgid "From %s in %s"
msgstr "Vindo de %s em %s"
"equipamento cliente."
msgid "Monday"
-msgstr ""
+msgstr "Segunda-Feira"
msgid "Month Days"
-msgstr ""
+msgstr "Dias do mês"
msgid "Name"
msgstr "Nome"
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "Redireciona tráfego entrante para o computador interno especificado"
+msgid "Restart Firewall"
+msgstr "Reiniciar o Firewall"
+
msgid "Restrict Masquerading to given destination subnets"
msgstr "Restringe o mascaramento para uma subrede de destino específica"
msgstr "Porta da SNAT"
msgid "Saturday"
-msgstr ""
+msgstr "Sábado"
msgid "Source IP address"
msgstr "Endereço IP de origem"
msgstr "Zona de origem"
msgid "Start Date (yyyy-mm-dd)"
-msgstr ""
+msgstr "Dia inicial (aaaa-mm-dd)"
msgid "Start Time (hh:mm:ss)"
-msgstr ""
+msgstr "Hora inicial (hh:mm:ss)"
msgid "Stop Date (yyyy-mm-dd)"
-msgstr ""
+msgstr "Dia final (aaaa-mm-dd)"
msgid "Stop Time (hh:mm:ss)"
-msgstr ""
+msgstr "Hora final (hh:mm:ss)"
msgid "Sunday"
-msgstr ""
+msgstr "Domingo"
msgid ""
"The firewall creates zones over your network interfaces to control network "
"Esta página permite que você mude propriedades avançadas da entrada da regra "
"de tráfego, como os equipamentos de origem e destino."
-#, fuzzy
msgid ""
"This section defines common properties of %q. The <em>input</em> and "
"<em>output</em> options set the default policies for traffic entering and "
"zona."
msgid "Thursday"
-msgstr ""
+msgstr "Quita-feira"
msgid "Time in UTC"
-msgstr ""
+msgstr "Hora em UTC"
msgid "To %s at %s on <var>this device</var>"
msgstr "Para %s em %s <var>neste dispositivo</var>"
"ou abrir portas WAN no roteador."
msgid "Tuesday"
-msgstr ""
+msgstr "Terça-feira"
msgid "Via %s"
msgstr "Via %s"
msgstr "Via %s at %s"
msgid "Wednesday"
-msgstr ""
+msgstr "Quarta-feira"
msgid "Week Days"
-msgstr ""
+msgstr "Dias da semana"
msgid ""
"You may specify multiple by selecting \"-- custom --\" and then entering "
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "Redirecionar o tráfego de entrada correspondente para o host interno"
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr ""
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr ""
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr ""
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "Перенаправить входящий трафик на указанный хост внутренней сети"
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr "Использовать маскарадинг только для указанных подсетей-получателей"
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr ""
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr ""
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr ""
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr ""
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr ""
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr ""
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr ""
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr ""
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "Переспрямувати відповідний вхідний трафік на заданий внутрішній вузол"
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr "Обмежити підміну заданими підмережами призначення"
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr ""
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr ""
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "重定向匹配的入站流量到的内部主机"
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr "要限制IP动态伪装的目标子网"
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "重導向已匹配傳入流量到內部主機上"
+msgid "Restart Firewall"
+msgstr ""
+
msgid "Restrict Masquerading to given destination subnets"
msgstr "限制偽裝到已給予的目標子網路"
-- Copyright 2015 Jonathan Bennett <jbennett@incomsystems.biz>
-- Licensed to the public under the GNU General Public License v2.
-
+tmp = 0
m = Map("fwknopd", translate("Firewall Knock Operator"))
s = m:section(TypedSection, "global", translate("Enable Uci/Luci control")) -- Set uci control on or off
s.anonymous=true
s:option(Flag, "uci_enabled", translate("Enable config overwrite"), translate("When unchecked, the config files in /etc/fwknopd will be used as is, ignoring any settings here."))
-qr = s:option(DummyValue, "note0", "dummy")
-qr.template = "fwknopd-qr"
-qr:depends("uci_enabled", "1")
s = m:section(TypedSection, "access", translate("access.conf stanzas")) -- set the access.conf settings
s.anonymous=true
s.addremove=true
-s.dynamic=true
+qr = s:option(DummyValue, "note0", "dummy")
+qr.tmp = tmp
+qr.template = "fwknopd-qr"
+qr:depends("uci_enabled", "1")
s:option(Value, "SOURCE", "SOURCE", translate("Use ANY for any source ip"))
k1 = s:option(Value, "KEY", "KEY", translate("Define the symmetric key used for decrypting an incoming SPA packet that is encrypted by the fwknop client with Rijndael."))
k1:depends("keytype", translate("Normal Key"))
This makes it impossible to use the -s command line argument on the fwknop client command line, so either -R \
has to be used to automatically resolve the external address (if the client behind a NAT) or the client must \
know the external IP and set it via the -a argument."))
-s:option(DummyValue, "note1", translate("Enter custom access.conf variables below:"))
s = m:section(TypedSection, "config", translate("fwknopd.conf config options"))
s.anonymous=true
-s.dynamic=true
s:option(Value, "MAX_SPA_PACKET_AGE", "MAX_SPA_PACKET_AGE", translate("Maximum age in seconds that an SPA packet will be accepted. defaults to 120 seconds"))
s:option(Value, "PCAP_INTF", "PCAP_INTF", translate("Specify the ethernet interface on which fwknopd will sniff packets."))
s:option(Value, "ENABLE_IPT_FORWARDING", "ENABLE_IPT_FORWARDING", translate("Allow SPA clients to request access to services through an iptables firewall instead of just to it."))
-s:option(DummyValue, "note2", translate("Enter custom fwknopd.conf variables below:"))
+s:option(Value, "ENABLE_NAT_DNS", "ENABLE_NAT_DNS", translate("Allow SPA clients to request forwarding destination by DNS name."))
return m
-<% print(luci.sys.exec("sh /usr/sbin/gen-qr.sh")) %>
+<% print(luci.sys.exec("sh /usr/sbin/gen-qr.sh " .. self.tmp)) %>
+<% self.tmp = self.tmp + 1 %>
"Allow SPA clients to request access to services through an iptables firewall "
"instead of just to it."
+msgid "Allow SPA clients to request forwarding destination by DNS name."
+msgstr ""
+
msgid "Base 64 key"
msgstr "Base 64 key"
msgid "Enable config overwrite"
msgstr "Enable config overwrite"
-msgid "Enter custom access.conf variables below:"
-msgstr "Enter custom access.conf variables below:"
-
-msgid "Enter custom fwknopd.conf variables below:"
-msgstr "Enter custom fwknopd.conf variables below:"
-
msgid "Firewall Knock Daemon"
msgstr "Firewall Knock Daemon"
msgid "fwknopd.conf config options"
msgstr "fwknopd.conf config options"
+
+#~ msgid "Enter custom access.conf variables below:"
+#~ msgstr "Enter custom access.conf variables below:"
+
+#~ msgid "Enter custom fwknopd.conf variables below:"
+#~ msgstr "Enter custom fwknopd.conf variables below:"
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Language: pt_BR\n"
+
+msgid ""
+"Allow SPA clients to request access to services through an iptables firewall "
+"instead of just to it."
+msgstr ""
+"Permitir que clientes SPA requeiram acesso a serviços através de um firewall "
+"iptables ao invés de apenas fazê-lo."
+
+msgid "Allow SPA clients to request forwarding destination by DNS name."
+msgstr ""
+"Permitir que clientes SPA requeiram encaminhamento de destinos por nome DNS."
+
+msgid "Base 64 key"
+msgstr "Chave em formato base64"
+
+msgid ""
+"Define a set of ports and protocols (tcp or udp) that will be opened if a "
+"valid knock sequence is seen. If this entry is not set, fwknopd will attempt "
+"to honor any proto/port request specified in the SPA data (unless of it "
+"matches any “RESTRICT_PORTS” entries). Multiple entries are comma-separated."
+msgstr ""
+"Define um conjunto de porta e protocolos (TCP ou UDP) que serão abertos se "
+"uma sequência de batidas for observada. Se esta entrada não estiver "
+"definida, fwknopd irá tentar honrar qualquer requisição de protocolo/porta "
+"especificada nos dados SPA (a não ser se casar com qualquer entrada de "
+"\"RESTRICT_PORTS\"). Múltiplas entradas serão separadas por vírgula."
+
+msgid ""
+"Define the length of time access will be granted by fwknopd through the "
+"firewall after a valid knock sequence from a source IP address. If "
+"“FW_ACCESS_TIMEOUT” is not set then the default timeout of 30 seconds will "
+"automatically be set."
+msgstr ""
+"Define a duração do tempo de acesso que será concedido pelo fwknopd através "
+"do firewall depois de uma sequência de batidas válida de um endereço IP. Se "
+"“FW_ACCESS_TIMEOUT” não estiver definido, o valor padrão será de 30 "
+"segundos. "
+
+msgid ""
+"Define the symmetric key used for decrypting an incoming SPA packet that is "
+"encrypted by the fwknop client with Rijndael."
+msgstr ""
+"Define a chave simétrica usada para decifrar um pacote SPA entrante que foi "
+"cifrado pelo cliente fwknop com o algoritmo Rijndael."
+
+msgid "Enable Uci/Luci control"
+msgstr "Habilitar o controle UCI/Luci"
+
+msgid "Enable config overwrite"
+msgstr "Habilitar a sobrescrita da configuração"
+
+msgid "Firewall Knock Daemon"
+msgstr "Servidor do Firwall Knock"
+
+msgid "Firewall Knock Operator"
+msgstr "Operador do Firewall Knock"
+
+msgid ""
+"Force all SPA packets to contain a real IP address within the encrypted "
+"data. This makes it impossible to use the -s command line argument on the "
+"fwknop client command line, so either -R has to be used to automatically "
+"resolve the external address (if the client behind a NAT) or the client must "
+"know the external IP and set it via the -a argument."
+msgstr ""
+"Forçar que todos os pacotes SPA contenham um endereço IP real dentro do "
+"pacote cifrado. Isto torna impossível o uso do argumento de linha de comando "
+"'-s' no cliente fwknop. Desta forma, ou o argumento '-R' deve ser usada para "
+"resolver os endereços externos automaticamente (se o cliente estiver atrás "
+"de uma NAT) ou o ciente deve conhecer o seu endereço IP externo e defini-lo "
+"através do argumento '-a'."
+
+msgid ""
+"Maximum age in seconds that an SPA packet will be accepted. defaults to 120 "
+"seconds"
+msgstr ""
+"Idade máxima, em segundos, que um pacote SPA será aceito. Padrão é 120 "
+"segundos."
+
+msgid "Normal Key"
+msgstr "Chave Normal"
+
+msgid "Specify the ethernet interface on which fwknopd will sniff packets."
+msgstr ""
+"Especifica o dispositivo ethernet no qual o fwknopd irá observar os pacotes."
+
+msgid "The base64 hmac key"
+msgstr "A chave de autenticação HMAC em formato base64"
+
+msgid "Use ANY for any source ip"
+msgstr "Use \"ANY\" para qualquer endereço IP de origem"
+
+msgid ""
+"When unchecked, the config files in /etc/fwknopd will be used as is, "
+"ignoring any settings here."
+msgstr ""
+"Quando desmarcado, os arquivos de configuração em /etc/fwknopd serão usados "
+"como estão, ignorando qualquer ajustes feitos aqui."
+
+msgid "access.conf stanzas"
+msgstr "Estâncias do access.conf"
+
+msgid "fwknopd.conf config options"
+msgstr "Opções do fwknopd.conf"
"instead of just to it."
msgstr ""
+msgid "Allow SPA clients to request forwarding destination by DNS name."
+msgstr ""
+
msgid "Base 64 key"
msgstr ""
msgid "Enable config overwrite"
msgstr ""
-msgid "Enter custom access.conf variables below:"
-msgstr ""
-
-msgid "Enter custom fwknopd.conf variables below:"
-msgstr ""
-
msgid "Firewall Knock Daemon"
msgstr ""
uci set fwknopd.@access[0].KEY_BASE64=`fwknopd --key-gen | awk '/^KEY/ {print $2;}'`
uci set fwknopd.@access[0].HMAC_KEY_BASE64=`fwknopd --key-gen | awk '/^HMAC/ {print $2;}'`
uci set fwknopd.@config[0].ENABLE_IPT_FORWARDING='y'
+uci set fwknopd.@config[0].ENABLE_NAT_DNS='y'
uci commit fwknopd
rm -f /tmp/luci-indexcache
#!/bin/sh
+entry_num=0
+if [ "$1" != "" ]; then
+entry_num=$1
+fi
-key_base64=$(uci get fwknopd.@access[0].KEY_BASE64)
-key=$(uci get fwknopd.@access[0].KEY)
-hmac_key_base64=$(uci get fwknopd.@access[0].HMAC_KEY_BASE64)
-hmac_key=$(uci get fwknopd.@access[0].HMAC_KEY)
+key_base64=$(uci get fwknopd.@access[$entry_num].KEY_BASE64)
+key=$(uci get fwknopd.@access[$entry_num].KEY)
+hmac_key_base64=$(uci get fwknopd.@access[$entry_num].HMAC_KEY_BASE64)
+hmac_key=$(uci get fwknopd.@access[$entry_num].HMAC_KEY)
if [ $key_base64 != "" ]; then
qr="KEY_BASE64:$key_base64"
--- /dev/null
+#
+# Copyright (C) 2017 Dan Luedtke <mail@danrl.com>
+#
+# This is free software, licensed under the Apache License, Version 2.0 .
+#
+
+include $(TOPDIR)/rules.mk
+
+LUCI_TITLE:=LXC management Web UI
+LUCI_DEPENDS:=+luci-mod-admin-full +lxc +lxc-create +liblxc +rpcd-mod-lxc +getopt +xz
+LUCI_PKGARCH:=all
+
+PKG_MAINTAINER:=Petar Koretic <petar.koretic@sartura.hr>
+
+include ../../luci.mk
+
+# call BuildPackage - OpenWrt buildroot signature
--- /dev/null
+--[[
+
+LuCI LXC module
+
+Copyright (C) 2014, Cisco Systems, Inc.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Author: Petar Koretic <petar.koretic@sartura.hr>
+
+]]--
+
+module("luci.controller.lxc", package.seeall)
+
+require "ubus"
+local conn = ubus.connect()
+if not conn then
+ error("Failed to connect to ubus")
+end
+
+
+function fork_exec(command)
+ local pid = nixio.fork()
+ if pid > 0 then
+ return
+ elseif pid == 0 then
+ -- change to root dir
+ nixio.chdir("/")
+
+ -- patch stdin, out, err to /dev/null
+ local null = nixio.open("/dev/null", "w+")
+ if null then
+ nixio.dup(null, nixio.stderr)
+ nixio.dup(null, nixio.stdout)
+ nixio.dup(null, nixio.stdin)
+ if null:fileno() > 2 then
+ null:close()
+ end
+ end
+
+ -- replace with target command
+ nixio.exec("/bin/sh", "-c", command)
+ end
+end
+
+function index()
+ page = node("admin", "services", "lxc")
+ page.target = cbi("lxc")
+ page.title = _("LXC Containers")
+ page.order = 70
+
+ page = entry({"admin", "services", "lxc_create"}, call("lxc_create"), nil)
+ page.leaf = true
+
+ page = entry({"admin", "services", "lxc_action"}, call("lxc_action"), nil)
+ page.leaf = true
+
+ page = entry({"admin", "services", "lxc_get_downloadable"}, call("lxc_get_downloadable"), nil)
+ page.leaf = true
+
+ page = entry({"admin", "services", "lxc_configuration_get"}, call("lxc_configuration_get"), nil)
+ page.leaf = true
+
+ page = entry({"admin", "services", "lxc_configuration_set"}, call("lxc_configuration_set"), nil)
+ page.leaf = true
+
+end
+
+function lxc_get_downloadable()
+ luci.http.prepare_content("application/json")
+
+ local f = io.popen('uname -m', 'r')
+ local target = f:read('*a')
+ f:close()
+ target = target:gsub("^%s*(.-)%s*$", "%1")
+
+ local templates = {}
+
+ local f = io.popen('lxc-create -n just_want_to_list_available_lxc_templates -t download -- --list', 'r')
+
+ for line in f:lines() do
+ local dist,version = line:match("^(%S+)%s+(%S+)%s+" .. target .. "%s+default%s+%S+$")
+ if dist~=nil and version~=nil then templates[#templates + 1] = dist .. ":" .. version end
+ end
+
+ f:close()
+ luci.http.write_json(templates)
+end
+
+function lxc_create(lxc_name, lxc_template)
+ luci.http.prepare_content("text/plain")
+
+ local uci = require("uci").cursor()
+
+ local url = uci:get("lxc", "lxc", "url")
+
+ if not pcall(dofile, "/etc/openwrt_release") then
+ return luci.http.write("1")
+ end
+
+ local f = io.popen('uname -m', 'r')
+ local target = f:read('*a')
+ f:close()
+ target = target:gsub("^%s*(.-)%s*$", "%1")
+
+ local lxc_dist = lxc_template:gsub("(.*):(.*)", '%1')
+ local lxc_release = lxc_template:gsub("(.*):(.*)", '%2')
+
+ local data = conn:call("lxc", "create", { name = lxc_name, template = "download", args = { "--server", url, "--no-validate", "--dist", lxc_dist, "--release", lxc_release, "--arch", target } } )
+
+ luci.http.write(data)
+end
+
+function lxc_action(lxc_action, lxc_name)
+ luci.http.prepare_content("application/json")
+
+ local data, ec = conn:call("lxc", lxc_action, lxc_name and { name = lxc_name} or {} )
+
+ luci.http.write_json(ec and {} or data)
+end
+
+function lxc_get_config_path()
+ local f = io.open("/etc/lxc/lxc.conf", "r")
+ local content = f:read("*all")
+ f:close()
+ local ret = content:match('^%s*lxc.lxcpath%s*=%s*([^%s]*)')
+ if ret then
+ return ret .. "/"
+ else
+ return "/srv/lxc/"
+ end
+end
+
+function lxc_configuration_get(lxc_name)
+ luci.http.prepare_content("text/plain")
+
+ local f = io.open(lxc_get_config_path() .. lxc_name .. "/config", "r")
+ local content = f:read("*all")
+ f:close()
+
+ luci.http.write(content)
+end
+
+function lxc_configuration_set(lxc_name)
+ luci.http.prepare_content("text/plain")
+
+ local lxc_configuration = luci.http.formvalue("lxc_configuration")
+
+ if lxc_configuration == nil then
+ return luci.http.write("1")
+ end
+
+ local f, err = io.open(lxc_get_config_path() .. lxc_name .. "/config","w+")
+ if not f then
+ return luci.http.write("2")
+ end
+
+ f:write(lxc_configuration)
+ f:close()
+
+ luci.http.write("0")
+end
+
--- /dev/null
+--[[
+
+LuCI LXC module
+
+Copyright (C) 2014, Cisco Systems, Inc.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Author: Petar Koretic <petar.koretic@sartura.hr>
+
+]]--
+
+local fs = require "nixio.fs"
+
+m = Map("lxc", translate("LXC Containers"))
+
+if fs.access("/etc/config/lxc") then
+ m:section(SimpleSection).template = "lxc"
+
+ s = m:section(TypedSection, "lxc", translate("Options"))
+ s.anonymous = true
+ s.addremove = false
+
+ s:option(Value, "url", translate("Containers URL"))
+end
+
+return m
--- /dev/null
+<%#
+
+LuCI LXC module
+
+Copyright (C) 2014, Cisco Systems, Inc.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Author: Petar Koretic <petar.koretic@sartura.hr>
+
+-%>
+
+<fieldset class="cbi-section">
+ <legend><%:Available Containers%></legend>
+ <div class="cbi-section-node">
+ <table id="t_lxc_list" class="cbi-section-table">
+ <tr class="cbi-section-table-titles">
+ <th class="cbi-section-table-cell"><%:Name%></th>
+ <th class="cbi-section-table-cell"><%:Status%></th>
+ <th class="cbi-section-table-cell"><%:Actions%></th>
+ </tr>
+ </table>
+ </div>
+</fieldset>
+
+<fieldset class="cbi-section">
+ <span id="lxc-list-output"></span>
+</fieldset>
+
+<hr/>
+<fieldset class="cbi-section">
+ <legend><%:Create New Container%></legend>
+ <div class="cbi-section-node">
+ <table id="t_lxc_create" class="cbi-section-table">
+ <tr class="cbi-section-table-titles">
+ <th class="cbi-section-table-cell"><%:Name%></th>
+ <th class="cbi-section-table-cell"><%:Template%></th>
+ <th class="cbi-section-table-cell"><%:Actions%></th>
+ </tr>
+ <tr id="tr_holder">
+ <td>
+ <input type="text" id="tx_name" placeholder="<%:Enter new name%>" value='' />
+ </td>
+ <td>
+ <select id="s_template" class="cbi-input-select cbi-button">
+ </select>
+ </td>
+ <td>
+ <input type="button" id="bt_create" value="<%:Create%>" onclick="lxc_create(tr_holder)" class="cbi-button cbi-button-add" />
+ <span id="lxc-add-loader" style="display:inline-block; width:16px; height:16px; margin:0 5px"></span>
+ </td>
+ </tr>
+ </table>
+ </div>
+</fieldset>
+
+<fieldset class="cbi-section">
+ <span id="lxc-add-output"></span>
+</fieldset>
+
+<hr/>
+
+<script type="text/javascript" src="<%=resource%>/cbi.js"></script>
+<script type="text/javascript">//<![CDATA[
+
+ window.img = { "red" : "<%=resource%>/cbi/red.gif", "green" : "<%=resource%>/cbi/green.gif", "purple" : "<%=resource%>/cbi/purple.gif" }
+ window.states = { "STOPPED" : "red", "RUNNING" : "green", "FROZEN" : "purple"}
+
+ var t_lxc_list = document.getElementById('t_lxc_list');
+ var loader_html = '<img src="<%=resource%>/icons/loading.gif" alt="<%:Loading%>" width="16" height="16" style="vertical-align:middle" /> ';
+ var timeout_msg = 0
+ var output_list = document.getElementById("lxc-list-output")
+ var output_add = document.getElementById("lxc-add-output")
+ var loader_add = document.getElementById("lxc-add-loader")
+
+ function lxc_create(tr)
+ {
+ var lxc_name = tr.querySelector("#tx_name").value.trim()
+ var lxc_template = tr.querySelector("#s_template").value
+ var bt_create = tr.querySelector("#bt_create")
+
+ if (t_lxc_list.querySelector("[data-id='" + lxc_name + "']") != null)
+ return info_message(output_add, "Container with that name already exists!", 4000)
+
+ bt_create.disabled = true
+ output_add.innerHTML = ''
+
+ if (!lxc_name || !lxc_name.length)
+ {
+ bt_create.disabled = false
+ return info_message(output_add, "Name cannot be empty!", 4000)
+ }
+
+ loading(loader_add)
+
+ new XHR().get('<%=luci.dispatcher.build_url("admin", "services")%>/lxc_create/' + '%h/%h'.format(lxc_name, lxc_template) , null,
+ function(x)
+ {
+ bt_create.disabled = false
+ loading(loader_add, 0)
+
+ if (!x)
+ info_message(output_add, "Container creation failed!")
+ })
+ }
+
+ function lxc_create_template(lxc_name, lxc_state)
+ {
+ var info_row = t_lxc_list.querySelector("#empty")
+ if (info_row)
+ t_lxc_list.deleteRow(1)
+
+ var actions = ''
+ actions += '<input type="button" onclick="action_handler(this)" data-action="start" value="<%:Start%>" class="cbi-button cbi-button-apply" />'
+ actions+= '<input type="button" onclick="action_handler(this)" data-action="stop" value="<%:Stop%>" class="cbi-button cbi-button-reset" />'
+ actions+= '<input type="button" onclick="action_handler(this)" data-action="destroy" value="<%:Delete%>" class="cbi-button cbi-button-remove" />'
+ actions+= ' <select class="cbi-input-select cbi-button" onchange="action_more_handler(this)">\
+ <option selected disabled>more</option>\
+ <option>configure</option>\
+ <option>freeze</option>\
+ <option>unfreeze</option>\
+ <option>reboot</option>\
+ </select>'
+ actions+= '<span data-loader style="display:inline-block; width:16px; height:16px; margin:0 5px"></span>'
+
+ var row = t_lxc_list.insertRow(-1)
+ var cell = row.insertCell(-1)
+ cell.innerHTML = '%q%h%q'.format("<strong>", lxc_name, "</strong>")
+ cell.width = "30%"
+ cell.setAttribute("data-id", lxc_name)
+
+ cell = row.insertCell(-1)
+ cell.width = "20%"
+ cell.innerHTML = "<img src='"+window.img[lxc_state]+"'/>"
+
+ cell = row.insertCell(-1)
+ cell.width = "50%"
+ cell.innerHTML = actions
+ }
+
+ function action_handler(self)
+ {
+ var action = self.getAttribute("data-action");
+
+ var bt_action = self
+ var lxc_name = self.parentNode.parentNode.children[0].getAttribute('data-id')
+ var status_img = self.parentNode.parentNode.querySelector('img')
+ var loader = self.parentNode.querySelector('[data-loader]')
+
+ bt_action.disabled = true
+
+ if (action == "stop")
+ {
+ loading(loader)
+
+ new XHR().get('<%=luci.dispatcher.build_url("admin", "services")%>/lxc_action/' + '%h/%h'.format(action, lxc_name), null,
+ function(x, ec)
+ {
+ loading(loader, 0)
+ bt_action.disabled = false
+
+ if (!x || ec)
+ return info_message(output_list,"Action failed!")
+
+ set_status(status_img, "red")
+
+ });
+ }
+
+ else if (action == "start")
+ {
+ loading(loader)
+
+ new XHR().get('<%=luci.dispatcher.build_url("admin", "services")%>/lxc_action/' + '%h/%h'.format(action, lxc_name), null,
+ function(x, data)
+ {
+ loading(loader, 0)
+ bt_action.disabled = false
+
+ //FIXME: uncomment after fixing 'lxc-start'
+ if (!x /*|| ec */)
+ return info_message(output_list,"Action failed!")
+
+ //FIXME: uncomment after fixing 'lxc-start'
+ //set_status(status_img, "green")
+ });
+ }
+
+ else if (action == "destroy")
+ {
+ if (!confirm("This will completely remove LXC container from the disk. Are you sure? (container will be stopped if running)"))
+ return
+
+ loading(loader)
+
+ new XHR().get('<%=luci.dispatcher.build_url("admin", "services")%>/lxc_action/' + '%h/%h'.format(action, lxc_name), null,
+ function(x, ec)
+ {
+ loading(loader, 0)
+ bt_action.disabled = false
+
+ if (!x || ec)
+ return info_message(output_list,"Action failed!")
+
+ var row = self.parentNode.parentNode
+ row.parentNode.removeChild(row)
+
+ });
+ }
+ }
+
+ function lxc_configure_handler(self)
+ {
+ var td = self.parentNode
+ var textarea = td.querySelector('[data-id]')
+ var lxc_name = textarea.getAttribute('data-id')
+ var lxc_configuration = textarea.value
+
+ new XHR().post('<%=luci.dispatcher.build_url("admin", "services")%>/lxc_configuration_set/' + lxc_name, "lxc_configuration=" + encodeURIComponent(lxc_configuration) ,
+ function(x)
+ {
+ if (!x || x.responseText != "0")
+ return info_message(output_list,"Action failed!")
+
+ info_message(output_list,"LXC configuration updated")
+ var row = td.parentNode
+ row.parentNode.removeChild(row)
+ })
+ }
+
+ function lxc_rename_template(lxc_name)
+ {
+ var h = '\
+ <input data-id="'+ lxc_name + '" type="text" placeholder="Enter new name" /> \
+ <input data-id="bt_confirm" onclick="lxc_rename_handler(this)" type="button" class="cbi-button" value="Confirm" />'
+
+ return h
+ }
+
+ function lxc_configure_template(lxc_name, lxc_configuration)
+ {
+ var h = '\
+ <textarea data-id="'+ lxc_name + '" rows="20" style="width:100%">'+ lxc_configuration +'</textarea> \
+ <input data-id="bt_confirm" onclick="lxc_configure_handler(this)" type="button" class="cbi-button" value="Confirm" />'
+
+ return h
+ }
+
+ function action_more_handler(self)
+ {
+ var lxc_name = self.parentNode.parentNode.querySelector('[data-id]').getAttribute('data-id')
+ var loader = self.parentNode.parentNode.querySelector('[data-loader]')
+
+ var option = self.options[self.selectedIndex].text
+
+ self.value = "more"
+
+ switch (option)
+ {
+ case "configure":
+ var tr = document.createElement('tr')
+ var row = self.parentNode.parentNode
+ var next_row = row.nextSibling
+ if (next_row && next_row.getAttribute('data-action') !== null)
+ row.parentNode.removeChild(next_row)
+
+ new XHR().get('<%=luci.dispatcher.build_url("admin", "services")%>/lxc_configuration_get/' + lxc_name, null,
+ function(x)
+ {
+ tr.innerHTML="<td colspan='" + row.cells.length + "'>" + lxc_configure_template(lxc_name, x.responseText) + "</td>"
+ tr.setAttribute('data-action','')
+ row.parentNode.insertBefore(tr, row.nextSibling)
+ })
+
+ break
+
+ case "freeze":
+ var tr = self.parentNode.parentNode
+ var img = tr.querySelector('img')
+ if(img.getAttribute('src') != window.img["green"])
+ return info_message(output_list,"Container is not running!")
+
+ loading(loader)
+ new XHR().get('<%=luci.dispatcher.build_url("admin", "services")%>/lxc_action/' + '%h/%h'.format(option, lxc_name), null,
+ function(x, ec)
+ {
+ loading(loader, 0)
+ if (!x || ec)
+ return info_message(output_list,"Action failed!")
+
+ set_status(img, "purple")
+ })
+
+ break
+
+ case "unfreeze":
+ var tr = self.parentNode.parentNode
+ var img = tr.querySelector('img')
+
+ if(img.getAttribute('src') != window.img["purple"])
+ return info_message(output_list,"Container is not frozen!")
+
+ loading(loader)
+ new XHR().get('<%=luci.dispatcher.build_url("admin", "services")%>/lxc_action/' + '%h/%h'.format(option, lxc_name), null,
+ function(x, ec)
+ {
+ loading(loader, 0)
+ if (!x || ec)
+ return info_message(output_list,"Action failed!")
+
+ set_status(img, "green")
+ })
+
+ break
+
+ case "reboot":
+ var tr = self.parentNode.parentNode
+ var img = tr.querySelector('img')
+ if(img.getAttribute('src') != window.img["green"])
+ return info_message(output_list,"Container is not running!")
+
+ if (!confirm("Are you sure?"))
+ return
+
+ loading(loader)
+ new XHR().get('<%=luci.dispatcher.build_url("admin", "services")%>/lxc_action/' + '%h/%h'.format(option, lxc_name), null,
+ function(x, ec)
+ {
+ loading(loader, 0)
+ if (!x || ec)
+ return info_message(output_list,"Action failed!")
+
+ info_message(output_list,"LXC rebooted")
+ })
+ break
+ }
+
+ }
+
+ function set_empty(t_lxc_list)
+ {
+ if (document.getElementById('empty') !== null)
+ return
+
+ var row_count = t_lxc_list.rows.length;
+ while(--row_count) t_lxc_list.deleteRow(row_count);
+
+ var row = t_lxc_list.insertRow(-1);
+ row.id = 'empty'
+ var cell = row.insertCell(0);
+ cell.colSpan = 4;
+ cell.innerHTML = '<em><br />There are no containers available yet.</em>';
+ }
+
+ function lxc_list_update()
+ {
+ XHR.poll(4, '<%=luci.dispatcher.build_url("admin", "services")%>/lxc_action/list', null,
+ function(x, data)
+ {
+ if (!x) return;
+
+ var lxc_count = Object.keys(data).length
+ if (!data || !lxc_count)
+ return set_empty(t_lxc_list)
+
+ if (document.getElementById('empty') !== null)
+ t_lxc_list.deleteRow(1);
+
+ var lxcs = t_lxc_list.querySelectorAll('td[data-id]')
+ var lxc_name_table = {}
+ for (var i = 0, len = lxcs.length; i < len; i++)
+ {
+ var lxc_name = lxcs[i].getAttribute('data-id')
+ if (!(lxc_name in data))
+ {
+ var row = t_lxc_list.querySelector("[data-id='" + lxc_name + "']").parentNode
+ row.parentNode.removeChild(row)
+ continue
+ }
+
+ lxc_name_table[lxc_name] = lxcs[i].parentNode.querySelector('img')
+ }
+
+ for(var key in data)
+ {
+ var lxc_name = key
+ var state = window.states[data[key]]
+
+ if (!(lxc_name in lxc_name_table))
+ lxc_create_template(lxc_name, state)
+
+ else if (state != get_status(lxc_name_table[lxc_name]))
+ set_status(lxc_name_table[lxc_name], state)
+ }
+
+ })
+ }
+
+ function loading(elem, state)
+ {
+ state = (typeof state === 'undefined') ? 1 : state
+
+ if (state === 1)
+ elem.innerHTML = loader_html
+ else
+ setTimeout(function() { elem.innerHTML = ''}, 1000)
+ }
+
+ function set_status(elem, state)
+ {
+ state = (typeof state === 'undefined') ? 1 : state
+
+ setTimeout(function() { elem.setAttribute('src', window.img[state])}, 300)
+ }
+
+ function get_status(elem)
+ {
+ var src = elem.getAttribute('src')
+
+ for (var i in img)
+ {
+ if (img[i] == src)
+ return i
+ }
+ }
+
+ function info_message(output, msg, timeout)
+ {
+ timeout = timeout || 3000
+ output.innerHTML = msg
+ clearTimeout(timeout_msg)
+ timeout_msg = setTimeout(function(){ output.innerHTML=""}, timeout);
+ }
+
+ lxc_list_update()
+
+ new XHR().get('<%=luci.dispatcher.build_url("admin", "services")%>/lxc_get_downloadable', null,
+ function(x, data)
+ {
+ if (!x) return;
+
+ var lxc_count = Object.keys(data).length
+ if (!data || !lxc_count) return;
+ var select = document.getElementById("s_template");
+ for(var key in data)
+ {
+ var option = document.createElement('option');
+ option.value = data[key];
+ option.text = data[key].replace(/[_:]/g, ' ');
+ select.add(option, -1);
+ }
+ })
+
+//]]></script>
--- /dev/null
+#
+# lxc uci configuration
+#
+
+config lxc 'lxc'
+ option url 'virtualwrt.org/containers/'
-- Channel selection
- if hwtype == "atheros" then
- local cc = util.trim(sys.exec("grep -i '" .. syscc .. "' /lib/wifi/cc_translate.txt |cut -d ' ' -f 2")) or 0
- sys.exec('"echo " .. cc .. " > /proc/sys/dev/" .. device .. "/countrycode"')
- elseif hwtype == "mac80211" then
+ if hwtype == "mac80211" then
sys.exec("iw reg set " .. syscc)
elseif hwtype == "broadcom" then
sys.exec ("wlc country " .. syscc)
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2011-10-11 00:23+0200\n"
-"PO-Revision-Date: 2014-03-17 10:01+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
+"PO-Revision-Date: 2017-02-20 18:00-0300\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
"Language: pt_BR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
+"Language-Team: \n"
msgid "Activate or deactivate IPv6 config globally."
msgstr "Habilita e desabilita a configuração IPv6 globalmente."
msgid "Mesh Wizard"
msgstr "Assistente de Configuração da Rede em Malha"
-#, fuzzy
msgid ""
"Note: this will set up this interface for mesh operation, i.e. add it to "
"zone 'freifunk' and enable olsr."
#!/bin/sh
-/etc/init.d/minidlna enabled && {
- /etc/init.d/minidlna stop
- /etc/init.d/minidlna disable
-}
-
uci -q batch <<-EOF >/dev/null
delete ucitrack.minidlna
set ucitrack.minidlna=minidlna
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: ja\n"
+"X-Generator: Poedit 1.8.11\n"
+
+msgid "Allow ringbuffer to exceed limit by this amount"
+msgstr "リングバッファーがこの量だけ制限を超過することを許可します。"
+
+msgid "Ask for username and password on connect"
+msgstr "接続時にユーザー名とパスワードを確認します。"
+
+msgid "Authentication required"
+msgstr "認証が必要"
+
+msgid "Auto"
+msgstr "自動"
+
+msgid "Automatic disabling of MJPEG mode"
+msgstr "MJPEGモードの自動無効化"
+
+msgid "Blink"
+msgstr "点滅"
+
+msgid "Check to save the stream to an mjpeg file"
+msgstr "MJPEGファイルに保存するにはチェックします。"
+
+msgid "Command to run"
+msgstr "実行するコマンド"
+
+msgid "Device"
+msgstr "デバイス"
+
+msgid "Do not initalize dynctrls of Linux-UVC driver"
+msgstr "Linux-UVCドライバのdynctrlsを初期化しません。"
+
+msgid "Don't initalize dynctrls"
+msgstr "dynctrlsを初期化しない"
+
+msgid "Drop frames smaller then this limit"
+msgstr "この制限よりも小さいフレームをドロップする"
+
+msgid "Enable MJPG-streamer"
+msgstr "MJPG-streamerを有効化します。"
+
+msgid "Enable YUYV format"
+msgstr "YUYV形式を有効化"
+
+msgid "Enabled"
+msgstr "有効"
+
+msgid "Exceed"
+msgstr "超過"
+
+msgid ""
+"Execute command after saving picture. Mjpg-streamer parse the filename as "
+"first parameter to your script."
+msgstr ""
+"画像保存後にコマンドを実行します。Mjpg-streamerは、ファイル名をスクリプトの最"
+"初の引数として解釈します。"
+
+msgid "File input"
+msgstr "ファイル入力"
+
+msgid "File output"
+msgstr "ファイル出力"
+
+msgid "Folder"
+msgstr "フォルダー"
+
+msgid "Folder that contains webpages"
+msgstr "ウェブページを含むフォルダー"
+
+msgid "Frames per second"
+msgstr "1秒当たりのフレーム数"
+
+msgid "General"
+msgstr "一般設定"
+
+msgid "HTTP output"
+msgstr "HTTP 出力"
+
+msgid "Input plugin"
+msgstr "入力プラグイン"
+
+msgid "Interval between saving pictures"
+msgstr "画像の保存間隔"
+
+msgid "JPEG compression quality"
+msgstr "JPEG 圧縮品質"
+
+msgid "Led control"
+msgstr "LED 制御"
+
+msgid "MJPG-streamer"
+msgstr "MJPG-streamer"
+
+msgid "Max. number of pictures to hold"
+msgstr "保持する画像の最大数です。"
+
+msgid "Mjpeg output"
+msgstr "MJPEG 出力"
+
+msgid "Off"
+msgstr "消灯"
+
+msgid "On"
+msgstr "点灯"
+
+msgid "Output plugin"
+msgstr "出力プラグイン"
+
+msgid "Password"
+msgstr "パスワード"
+
+msgid "Plugin settings"
+msgstr "プラグイン設定"
+
+msgid "Port"
+msgstr "ポート"
+
+msgid "Resolution"
+msgstr "解像度"
+
+msgid "Ring buffer size"
+msgstr "リングバッファー サイズ"
+
+msgid "Set folder to save pictures"
+msgstr "画像を保存するフォルダーを設定します。"
+
+msgid "Set the inteval in millisecond"
+msgstr "間隔をミリ秒で設定します。"
+
+msgid ""
+"Set the minimum size if the webcam produces small-sized garbage frames. May "
+"happen under low light conditions"
+msgstr ""
+"もしウェブカメラが小さなサイズの余分なフレームを生成する場合は、最小サイズを"
+"設定します。光量の低い条件下で発生することがあります。"
+
+msgid ""
+"Set the quality in percent. This setting activates YUYV format, disables "
+"MJPEG"
+msgstr ""
+"品質をパーセントで設定します。この設定はYUYV形式を有効にし、MJPEGを無効にしま"
+"す。"
+
+msgid "TCP port for this HTTP server"
+msgstr "このHTTPサーバーのTCPポートです。"
+
+msgid "UVC input"
+msgstr "UVC 入力"
+
+msgid "Username"
+msgstr "ユーザー名"
+
+msgid "WWW folder"
+msgstr "WWW フォルダー"
+
+msgid ""
+"mjpg streamer is a streaming application for Linux-UVC compatible webcams"
+msgstr ""
+"Mjpg streamerは、Linux-UVC互換ウェブカメラのためのストリーミング アプリケー"
+"ションです。"
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Language: pt_BR\n"
+
+msgid "Allow ringbuffer to exceed limit by this amount"
+msgstr "Permitir que o buffer em anel exceda o limite por essa quantidade"
+
+msgid "Ask for username and password on connect"
+msgstr "Pergunte por um usuário e senha na conexão"
+
+msgid "Authentication required"
+msgstr "Requer autenticação"
+
+msgid "Auto"
+msgstr "Automático"
+
+msgid "Automatic disabling of MJPEG mode"
+msgstr "Desativação automática do modo MJPEG"
+
+msgid "Blink"
+msgstr "Pisca"
+
+msgid "Check to save the stream to an mjpeg file"
+msgstr "Marque para salvar o fluxo em um arquivo MJPEG"
+
+msgid "Command to run"
+msgstr "Comando para executar:"
+
+msgid "Device"
+msgstr "Dispositivo"
+
+msgid "Do not initalize dynctrls of Linux-UVC driver"
+msgstr "Não inicie o dynctrls do driver do Linux-UVC"
+
+msgid "Don't initalize dynctrls"
+msgstr "Não inicia o dynctrls"
+
+msgid "Drop frames smaller then this limit"
+msgstr "Descarte quadros menores que este limite"
+
+msgid "Enable MJPG-streamer"
+msgstr "Ativa o MJPG-streamer"
+
+msgid "Enable YUYV format"
+msgstr "Ativar Formato YUYV"
+
+msgid "Enabled"
+msgstr "Habilitado"
+
+msgid "Exceed"
+msgstr "Ultrapassado"
+
+msgid ""
+"Execute command after saving picture. Mjpg-streamer parse the filename as "
+"first parameter to your script."
+msgstr ""
+"Execute o comando depois de salvar a imagem. Mjpg-streamer passa o nome do "
+"arquivo como primeiro parâmetro para o comando."
+
+msgid "File input"
+msgstr "Entrada do arquivo"
+
+msgid "File output"
+msgstr "Saída do arquivo"
+
+msgid "Folder"
+msgstr "Pasta"
+
+msgid "Folder that contains webpages"
+msgstr "Pasta que contém páginas web"
+
+msgid "Frames per second"
+msgstr "Quadros por segundos"
+
+msgid "General"
+msgstr "Geral"
+
+msgid "HTTP output"
+msgstr "Saída HTTP"
+
+msgid "Input plugin"
+msgstr "Plugins de entrada"
+
+msgid "Interval between saving pictures"
+msgstr "Intervalo entre o salvamento das imagens"
+
+msgid "JPEG compression quality"
+msgstr "Qualidade da compressão JPEG"
+
+msgid "Led control"
+msgstr "Controle de LED"
+
+msgid "MJPG-streamer"
+msgstr "MJPG-streamer"
+
+msgid "Max. number of pictures to hold"
+msgstr "Número máximo de imagens a serem mantidas"
+
+msgid "Mjpeg output"
+msgstr "Saída Mjpeg"
+
+msgid "Off"
+msgstr "Desligado"
+
+msgid "On"
+msgstr "Ligado"
+
+msgid "Output plugin"
+msgstr "Plugin de saída"
+
+msgid "Password"
+msgstr "Senha"
+
+msgid "Plugin settings"
+msgstr "Configurações do Plugin"
+
+msgid "Port"
+msgstr "Porta"
+
+msgid "Resolution"
+msgstr "Resolução"
+
+msgid "Ring buffer size"
+msgstr "Tamanho do buffer em anel"
+
+msgid "Set folder to save pictures"
+msgstr "Definir pasta para salvas as imagens"
+
+msgid "Set the inteval in millisecond"
+msgstr "Defina o intervalo em milisegundos"
+
+msgid ""
+"Set the minimum size if the webcam produces small-sized garbage frames. May "
+"happen under low light conditions"
+msgstr ""
+"Defina o tamanho mínimo se a webcam produz quadros lixo de tamanho pequeno. "
+"Pode acontecer sob condições de pouca luz"
+
+msgid ""
+"Set the quality in percent. This setting activates YUYV format, disables "
+"MJPEG"
+msgstr ""
+"Defina a qualidade em porcentagem. Esta definição ativa o formato YUYV, "
+"desativa MJPEG"
+
+msgid "TCP port for this HTTP server"
+msgstr "Porta TCP para este servidor HTTP"
+
+msgid "UVC input"
+msgstr "Dispositivo UVC de entrada"
+
+msgid "Username"
+msgstr "Usuário"
+
+msgid "WWW folder"
+msgstr "Pasta WWW"
+
+msgid ""
+"mjpg streamer is a streaming application for Linux-UVC compatible webcams"
+msgstr ""
+"Mjpg streamer é uma aplicação de streaming para webcams compatíveis com o "
+"Linux-UVC"
--- /dev/null
+#
+# Copyright (C) 2017 Dan Luedtke <mail@danrl.com>
+#
+# This is free software, licensed under the Apache License, Version 2.0 .
+#
+
+include $(TOPDIR)/rules.mk
+
+LUCI_TITLE:=LuCI support for the MWAN3 multiwan hotplug script
+LUCI_DEPENDS:=+mwan3 +luci-mod-admin-full +luci-app-firewall +luci-lib-nixio
+LUCI_PKGARCH:=all
+PKG_LICENSE:=GPLv2
+
+PKG_MAINTAINER:=Aedan Renner <chipdankly@gmail.com>
+
+include ../../luci.mk
+
+# call BuildPackage - OpenWrt buildroot signature
--- /dev/null
+module("luci.controller.mwan3", package.seeall)
+
+sys = require "luci.sys"
+ut = require "luci.util"
+
+ip = "/usr/bin/ip -4 "
+
+function index()
+ if not nixio.fs.access("/etc/config/mwan3") then
+ return
+ end
+
+ entry({"admin", "network", "mwan"},
+ alias("admin", "network", "mwan", "overview"),
+ _("Load Balancing"), 600)
+
+ entry({"admin", "network", "mwan", "overview"},
+ alias("admin", "network", "mwan", "overview", "overview_interface"),
+ _("Overview"), 10)
+ entry({"admin", "network", "mwan", "overview", "overview_interface"},
+ template("mwan/overview_interface"))
+ entry({"admin", "network", "mwan", "overview", "interface_status"},
+ call("interfaceStatus"))
+ entry({"admin", "network", "mwan", "overview", "overview_detailed"},
+ template("mwan/overview_detailed"))
+ entry({"admin", "network", "mwan", "overview", "detailed_status"},
+ call("detailedStatus"))
+
+ entry({"admin", "network", "mwan", "configuration"},
+ alias("admin", "network", "mwan", "configuration", "interface"),
+ _("Configuration"), 20)
+ entry({"admin", "network", "mwan", "configuration", "interface"},
+ arcombine(cbi("mwan/interface"), cbi("mwan/interfaceconfig")),
+ _("Interfaces"), 10).leaf = true
+ entry({"admin", "network", "mwan", "configuration", "member"},
+ arcombine(cbi("mwan/member"), cbi("mwan/memberconfig")),
+ _("Members"), 20).leaf = true
+ entry({"admin", "network", "mwan", "configuration", "policy"},
+ arcombine(cbi("mwan/policy"), cbi("mwan/policyconfig")),
+ _("Policies"), 30).leaf = true
+ entry({"admin", "network", "mwan", "configuration", "rule"},
+ arcombine(cbi("mwan/rule"), cbi("mwan/ruleconfig")),
+ _("Rules"), 40).leaf = true
+
+ entry({"admin", "network", "mwan", "advanced"},
+ alias("admin", "network", "mwan", "advanced", "hotplugscript"),
+ _("Advanced"), 100)
+ entry({"admin", "network", "mwan", "advanced", "hotplugscript"},
+ form("mwan/advanced_hotplugscript"))
+ entry({"admin", "network", "mwan", "advanced", "mwanconfig"},
+ form("mwan/advanced_mwanconfig"))
+ entry({"admin", "network", "mwan", "advanced", "networkconfig"},
+ form("mwan/advanced_networkconfig"))
+ entry({"admin", "network", "mwan", "advanced", "wirelessconfig"},
+ form("mwan/advanced_wirelessconfig"))
+ entry({"admin", "network", "mwan", "advanced", "diagnostics"},
+ template("mwan/advanced_diagnostics"))
+ entry({"admin", "network", "mwan", "advanced", "diagnostics_display"},
+ call("diagnosticsData"), nil).leaf = true
+ entry({"admin", "network", "mwan", "advanced", "troubleshooting"},
+ template("mwan/advanced_troubleshooting"))
+ entry({"admin", "network", "mwan", "advanced", "troubleshooting_display"},
+ call("troubleshootingData"))
+end
+
+function getInterfaceStatus(ruleNumber, interfaceName)
+ if ut.trim(sys.exec("uci -p /var/state get mwan3." .. interfaceName .. ".enabled")) == "1" then
+ if ut.trim(sys.exec(ip .. "route list table " .. ruleNumber)) ~= "" then
+ if ut.trim(sys.exec("uci -p /var/state get mwan3." .. interfaceName .. ".track_ip")) ~= "" then
+ return "online"
+ else
+ return "notMonitored"
+ end
+ else
+ return "offline"
+ end
+ else
+ return "notEnabled"
+ end
+end
+
+function getInterfaceName()
+ local ruleNumber, status = 0, ""
+ uci.cursor():foreach("mwan3", "interface",
+ function (section)
+ ruleNumber = ruleNumber+1
+ status = status .. section[".name"] .. "[" .. getInterfaceStatus(ruleNumber, section[".name"]) .. "]"
+ end
+ )
+ return status
+end
+
+function interfaceStatus()
+ local ntm = require "luci.model.network".init()
+
+ local mArray = {}
+
+ -- overview status
+ local statusString = getInterfaceName()
+ if statusString ~= "" then
+ mArray.wans = {}
+ wansid = {}
+
+ for wanName, interfaceState in string.gfind(statusString, "([^%[]+)%[([^%]]+)%]") do
+ local wanInterfaceName = ut.trim(sys.exec("uci -p /var/state get network." .. wanName .. ".ifname"))
+ if wanInterfaceName == "" then
+ wanInterfaceName = "X"
+ end
+ local wanDeviceLink = ntm:get_interface(wanInterfaceName)
+ wanDeviceLink = wanDeviceLink and wanDeviceLink:get_network()
+ wanDeviceLink = wanDeviceLink and wanDeviceLink:adminlink() or "#"
+ wansid[wanName] = #mArray.wans + 1
+ mArray.wans[wansid[wanName]] = { name = wanName, link = wanDeviceLink, ifname = wanInterfaceName, status = interfaceState }
+ end
+ end
+
+ -- overview status log
+ local mwanLog = ut.trim(sys.exec("logread | grep mwan3 | tail -n 50 | sed 'x;1!H;$!d;x'"))
+ if mwanLog ~= "" then
+ mArray.mwanlog = { mwanLog }
+ end
+
+ luci.http.prepare_content("application/json")
+ luci.http.write_json(mArray)
+end
+
+function detailedStatus()
+ local mArray = {}
+
+ -- detailed mwan status
+ local detailStatusInfo = ut.trim(sys.exec("/usr/sbin/mwan3 status"))
+ if detailStatusInfo ~= "" then
+ mArray.mwandetail = { detailStatusInfo }
+ end
+
+ luci.http.prepare_content("application/json")
+ luci.http.write_json(mArray)
+end
+
+function diagnosticsData(interface, tool, task)
+ function getInterfaceNumber()
+ local number = 0
+ uci.cursor():foreach("mwan3", "interface",
+ function (section)
+ number = number+1
+ if section[".name"] == interface then
+ interfaceNumber = number
+ end
+ end
+ )
+ end
+
+ local mArray = {}
+
+ local results = ""
+ if tool == "service" then
+ os.execute("/usr/sbin/mwan3 " .. task)
+ if task == "restart" then
+ results = "MWAN3 restarted"
+ elseif task == "stop" then
+ results = "MWAN3 stopped"
+ else
+ results = "MWAN3 started"
+ end
+ else
+ local interfaceDevice = ut.trim(sys.exec("uci -p /var/state get network." .. interface .. ".ifname"))
+ if interfaceDevice ~= "" then
+ if tool == "ping" then
+ local gateway = ut.trim(sys.exec("route -n | awk '{if ($8 == \"" .. interfaceDevice .. "\" && $1 == \"0.0.0.0\" && $3 == \"0.0.0.0\") print $2}'"))
+ if gateway ~= "" then
+ if task == "gateway" then
+ local pingCommand = "ping -c 3 -W 2 -I " .. interfaceDevice .. " " .. gateway
+ results = pingCommand .. "\n\n" .. sys.exec(pingCommand)
+ else
+ local tracked = ut.trim(sys.exec("uci -p /var/state get mwan3." .. interface .. ".track_ip"))
+ if tracked ~= "" then
+ for z in tracked:gmatch("[^ ]+") do
+ local pingCommand = "ping -c 3 -W 2 -I " .. interfaceDevice .. " " .. z
+ results = results .. pingCommand .. "\n\n" .. sys.exec(pingCommand) .. "\n\n"
+ end
+ else
+ results = "No tracking IP addresses configured on " .. interface
+ end
+ end
+ else
+ results = "No default gateway for " .. interface .. " found. Default route does not exist or is configured incorrectly"
+ end
+ elseif tool == "rulechk" then
+ getInterfaceNumber()
+ local rule1 = sys.exec(ip .. "rule | grep $(echo $((" .. interfaceNumber .. " + 1000)))")
+ local rule2 = sys.exec(ip .. "rule | grep $(echo $((" .. interfaceNumber .. " + 2000)))")
+ if rule1 ~= "" and rule2 ~= "" then
+ results = "All required interface IP rules found:\n\n" .. rule1 .. rule2
+ elseif rule1 ~= "" or rule2 ~= "" then
+ results = "Missing 1 of the 2 required interface IP rules\n\n\nRules found:\n\n" .. rule1 .. rule2
+ else
+ results = "Missing both of the required interface IP rules"
+ end
+ elseif tool == "routechk" then
+ getInterfaceNumber()
+ local routeTable = sys.exec(ip .. "route list table " .. interfaceNumber)
+ if routeTable ~= "" then
+ results = "Interface routing table " .. interfaceNumber .. " was found:\n\n" .. routeTable
+ else
+ results = "Missing required interface routing table " .. interfaceNumber
+ end
+ elseif tool == "hotplug" then
+ if task == "ifup" then
+ os.execute("/usr/sbin/mwan3 ifup " .. interface)
+ results = "Hotplug ifup sent to interface " .. interface .. "..."
+ else
+ os.execute("/usr/sbin/mwan3 ifdown " .. interface)
+ results = "Hotplug ifdown sent to interface " .. interface .. "..."
+ end
+ end
+ else
+ results = "Unable to perform diagnostic tests on " .. interface .. ". There is no physical or virtual device associated with this interface"
+ end
+ end
+ if results ~= "" then
+ results = ut.trim(results)
+ mArray.diagnostics = { results }
+ end
+
+ luci.http.prepare_content("application/json")
+ luci.http.write_json(mArray)
+end
+
+function troubleshootingData()
+ local ver = require "luci.version"
+
+ local mArray = {}
+
+ -- software versions
+ local wrtRelease = ut.trim(ver.distversion)
+ if wrtRelease ~= "" then
+ wrtRelease = "OpenWrt - " .. wrtRelease
+ else
+ wrtRelease = "OpenWrt - unknown"
+ end
+ local luciRelease = ut.trim(ver.luciversion)
+ if luciRelease ~= "" then
+ luciRelease = "\nLuCI - " .. luciRelease
+ else
+ luciRelease = "\nLuCI - unknown"
+ end
+ local mwanVersion = ut.trim(sys.exec("opkg info mwan3 | grep Version | awk '{print $2}'"))
+ if mwanVersion ~= "" then
+ mwanVersion = "\n\nmwan3 - " .. mwanVersion
+ else
+ mwanVersion = "\n\nmwan3 - unknown"
+ end
+ local mwanLuciVersion = ut.trim(sys.exec("opkg info luci-app-mwan3 | grep Version | awk '{print $2}'"))
+ if mwanLuciVersion ~= "" then
+ mwanLuciVersion = "\nmwan3-luci - " .. mwanLuciVersion
+ else
+ mwanLuciVersion = "\nmwan3-luci - unknown"
+ end
+ mArray.versions = { wrtRelease .. luciRelease .. mwanVersion .. mwanLuciVersion }
+
+ -- mwan config
+ local mwanConfig = ut.trim(sys.exec("cat /etc/config/mwan3"))
+ if mwanConfig == "" then
+ mwanConfig = "No data found"
+ end
+ mArray.mwanconfig = { mwanConfig }
+
+ -- network config
+ local networkConfig = ut.trim(sys.exec("cat /etc/config/network | sed -e 's/.*username.*/ USERNAME HIDDEN/' -e 's/.*password.*/ PASSWORD HIDDEN/'"))
+ if networkConfig == "" then
+ networkConfig = "No data found"
+ end
+ mArray.netconfig = { networkConfig }
+
+ -- wireless config
+ local wirelessConfig = ut.trim(sys.exec("cat /etc/config/wireless | sed -e 's/.*username.*/ USERNAME HIDDEN/' -e 's/.*password.*/ PASSWORD HIDDEN/' -e 's/.*key.*/ KEY HIDDEN/'"))
+ if wirelessConfig == "" then
+ wirelessConfig = "No data found"
+ end
+ mArray.wificonfig = { wirelessConfig }
+
+ -- ifconfig
+ local ifconfig = ut.trim(sys.exec("ifconfig"))
+ if ifconfig == "" then
+ ifconfig = "No data found"
+ end
+ mArray.ifconfig = { ifconfig }
+
+ -- route -n
+ local routeShow = ut.trim(sys.exec("route -n"))
+ if routeShow == "" then
+ routeShow = "No data found"
+ end
+ mArray.routeshow = { routeShow }
+
+ -- ip rule show
+ local ipRuleShow = ut.trim(sys.exec(ip .. "rule show"))
+ if ipRuleShow == "" then
+ ipRuleShow = "No data found"
+ end
+ mArray.iprule = { ipRuleShow }
+
+ -- ip route list table 1-250
+ local routeList, routeString = ut.trim(sys.exec(ip .. "rule | sed 's/://g' | awk '$1>=2001 && $1<=2250' | awk '{print $NF}'")), ""
+ if routeList ~= "" then
+ for line in routeList:gmatch("[^\r\n]+") do
+ routeString = routeString .. line .. "\n" .. sys.exec(ip .. "route list table " .. line)
+ end
+ routeString = ut.trim(routeString)
+ else
+ routeString = "No data found"
+ end
+ mArray.routelist = { routeString }
+
+ -- default firewall output policy
+ local firewallOut = ut.trim(sys.exec("uci -p /var/state get firewall.@defaults[0].output"))
+ if firewallOut == "" then
+ firewallOut = "No data found"
+ end
+ mArray.firewallout = { firewallOut }
+
+ -- iptables
+ local iptables = ut.trim(sys.exec("iptables -L -t mangle -v -n"))
+ if iptables == "" then
+ iptables = "No data found"
+ end
+ mArray.iptables = { iptables }
+
+ luci.http.prepare_content("application/json")
+ luci.http.write_json(mArray)
+end
--- /dev/null
+-- ------ hotplug script configuration ------ --
+
+fs = require "nixio.fs"
+sys = require "luci.sys"
+ut = require "luci.util"
+
+script = "/etc/hotplug.d/iface/16-mwancustom"
+scriptBackup = "/etc/hotplug.d/iface/16-mwancustombak"
+
+if luci.http.formvalue("cbid.luci.1._restorebak") then -- restore button has been clicked
+ luci.http.redirect(luci.dispatcher.build_url("admin/network/mwan/advanced/hotplugscript") .. "?restore=yes")
+elseif luci.http.formvalue("restore") == "yes" then -- restore script from backup
+ os.execute("cp -f " .. scriptBackup .. " " .. script)
+end
+
+
+m5 = SimpleForm("luci", nil)
+ m5:append(Template("mwan/advanced_hotplugscript")) -- highlight current tab
+
+f = m5:section(SimpleSection, nil,
+ translate("This section allows you to modify the contents of /etc/hotplug.d/iface/16-mwancustom<br />" ..
+ "This is useful for running system commands and/or scripts based on interface ifup or ifdown hotplug events<br /><br />" ..
+ "Notes:<br />" ..
+ "The first line of the script must be "#!/bin/sh" without quotes<br />" ..
+ "Lines beginning with # are comments and are not executed<br /><br />" ..
+ "Available variables:<br />" ..
+ "$ACTION is the hotplug event (ifup, ifdown)<br />" ..
+ "$INTERFACE is the interface name (wan1, wan2, etc.)<br />" ..
+ "$DEVICE is the device name attached to the interface (eth0.1, eth1, etc.)"))
+
+
+restore = f:option(Button, "_restorebak", translate("Restore default hotplug script"))
+ restore.inputtitle = translate("Restore...")
+ restore.inputstyle = "apply"
+
+t = f:option(TextValue, "lines")
+ t.rmempty = true
+ t.rows = 20
+
+ function t.cfgvalue()
+ local hps = fs.readfile(script)
+ if not hps or hps == "" then -- if script does not exist or is blank restore from backup
+ sys.call("cp -f " .. scriptBackup .. " " .. script)
+ return fs.readfile(script)
+ else
+ return hps
+ end
+ end
+
+ function t.write(self, section, data) -- format and write new data to script
+ return fs.writefile(script, ut.trim(data:gsub("\r\n", "\n")) .. "\n")
+ end
+
+
+return m5
--- /dev/null
+-- ------ mwan configuration ------ --
+
+ut = require "luci.util"
+
+mwanConfig = "/etc/config/mwan3"
+
+
+m5 = SimpleForm("luci", nil)
+ m5:append(Template("mwan/advanced_mwanconfig")) -- highlight current tab
+
+
+f = m5:section(SimpleSection, nil,
+ translate("This section allows you to modify the contents of /etc/config/mwan3"))
+
+t = f:option(TextValue, "lines")
+ t.rmempty = true
+ t.rows = 20
+
+ function t.cfgvalue()
+ return nixio.fs.readfile(mwanConfig) or ""
+ end
+
+ function t.write(self, section, data) -- format and write new data to script
+ return nixio.fs.writefile(mwanConfig, "\n" .. ut.trim(data:gsub("\r\n", "\n")) .. "\n")
+ end
+
+ function f.handle(self, state, data)
+ return true
+ end
+
+
+return m5
--- /dev/null
+-- ------ network configuration ------ --
+
+ut = require "luci.util"
+
+networkConfig = "/etc/config/network"
+
+
+m5 = SimpleForm("networkconf", nil)
+ m5:append(Template("mwan/advanced_networkconfig")) -- highlight current tab
+
+
+f = m5:section(SimpleSection, nil,
+ translate("This section allows you to modify the contents of /etc/config/network"))
+
+t = f:option(TextValue, "lines")
+ t.rmempty = true
+ t.rows = 20
+
+ function t.cfgvalue()
+ return nixio.fs.readfile(networkConfig) or ""
+ end
+
+ function t.write(self, section, data) -- format and write new data to script
+ return nixio.fs.writefile(networkConfig, "\n" .. ut.trim(data:gsub("\r\n", "\n")) .. "\n")
+ end
+
+ function f.handle(self, state, data)
+ return true
+ end
+
+
+return m5
--- /dev/null
+-- ------ wireless configuration ------ --
+
+ut = require "luci.util"
+
+wirelessConfig = "/etc/config/wireless"
+
+
+m5 = SimpleForm("wirelessconf", nil)
+ m5:append(Template("mwan/advanced_wirelessconfig")) -- highlight current tab
+
+
+f = m5:section(SimpleSection, nil,
+ translate("This section allows you to modify the contents of /etc/config/wireless"))
+
+t = f:option(TextValue, "lines")
+ t.rmempty = true
+ t.rows = 20
+
+ function t.cfgvalue()
+ return nixio.fs.readfile(wirelessConfig) or ""
+ end
+
+ function t.write(self, section, data) -- format and write new data to script
+ return nixio.fs.writefile(wirelessConfig, "\n" .. ut.trim(data:gsub("\r\n", "\n")) .. "\n")
+ end
+
+ function f.handle(self, state, data)
+ return true
+ end
+
+
+return m5
--- /dev/null
+-- ------ extra functions ------ --
+
+function interfaceCheck() -- find issues with too many interfaces, reliability and metric
+ uci.cursor():foreach("mwan3", "interface",
+ function (section)
+ local interfaceName = section[".name"]
+ interfaceNumber = interfaceNumber+1 -- count number of mwan interfaces configured
+ -- create list of metrics for none and duplicate checking
+ local metricValue = ut.trim(sys.exec("uci -p /var/state get network." .. interfaceName .. ".metric"))
+ if metricValue == "" then
+ errorFound = 1
+ errorNoMetricList = errorNoMetricList .. interfaceName .. " "
+ else
+ metricList = metricList .. interfaceName .. " " .. metricValue .. "\n"
+ end
+ -- check if any interfaces have a higher reliability requirement than tracking IPs configured
+ local trackingNumber = tonumber(ut.trim(sys.exec("echo $(uci -p /var/state get mwan3." .. interfaceName .. ".track_ip) | wc -w")))
+ if trackingNumber > 0 then
+ local reliabilityNumber = tonumber(ut.trim(sys.exec("uci -p /var/state get mwan3." .. interfaceName .. ".reliability")))
+ if reliabilityNumber and reliabilityNumber > trackingNumber then
+ errorFound = 1
+ errorReliabilityList = errorReliabilityList .. interfaceName .. " "
+ end
+ end
+ -- check if any interfaces are not properly configured in /etc/config/network or have no default route in main routing table
+ if ut.trim(sys.exec("uci -p /var/state get network." .. interfaceName)) == "interface" then
+ local interfaceDevice = ut.trim(sys.exec("uci -p /var/state get network." .. interfaceName .. ".ifname"))
+ if interfaceDevice == "uci: Entry not found" or interfaceDevice == "" then
+ errorFound = 1
+ errorNetConfigList = errorNetConfigList .. interfaceName .. " "
+ errorRouteList = errorRouteList .. interfaceName .. " "
+ else
+ local routeCheck = ut.trim(sys.exec("route -n | awk '{if ($8 == \"" .. interfaceDevice .. "\" && $1 == \"0.0.0.0\" && $3 == \"0.0.0.0\") print $1}'"))
+ if routeCheck == "" then
+ errorFound = 1
+ errorRouteList = errorRouteList .. interfaceName .. " "
+ end
+ end
+ else
+ errorFound = 1
+ errorNetConfigList = errorNetConfigList .. interfaceName .. " "
+ errorRouteList = errorRouteList .. interfaceName .. " "
+ end
+ end
+ )
+ -- check if any interfaces have duplicate metrics
+ local metricDuplicateNumbers = sys.exec("echo '" .. metricList .. "' | awk '{print $2}' | uniq -d")
+ if metricDuplicateNumbers ~= "" then
+ errorFound = 1
+ local metricDuplicates = ""
+ for line in metricDuplicateNumbers:gmatch("[^\r\n]+") do
+ metricDuplicates = sys.exec("echo '" .. metricList .. "' | grep '" .. line .. "' | awk '{print $1}'")
+ errorDuplicateMetricList = errorDuplicateMetricList .. metricDuplicates
+ end
+ errorDuplicateMetricList = sys.exec("echo '" .. errorDuplicateMetricList .. "' | tr '\n' ' '")
+ end
+end
+
+function interfaceWarnings() -- display status and warning messages at the top of the page
+ local warnings = ""
+ if interfaceNumber <= 250 then
+ warnings = "<strong>There are currently " .. interfaceNumber .. " of 250 supported interfaces configured</strong>"
+ else
+ warnings = "<font color=\"ff0000\"><strong>WARNING: " .. interfaceNumber .. " interfaces are configured exceeding the maximum of 250!</strong></font>"
+ end
+ if errorReliabilityList ~= " " then
+ warnings = warnings .. "<br /><br /><font color=\"ff0000\"><strong>WARNING: some interfaces have a higher reliability requirement than there are tracking IP addresses!</strong></font>"
+ end
+ if errorRouteList ~= " " then
+ warnings = warnings .. "<br /><br /><font color=\"ff0000\"><strong>WARNING: some interfaces have no default route in the main routing table!</strong></font>"
+ end
+ if errorNetConfigList ~= " " then
+ warnings = warnings .. "<br /><br /><font color=\"ff0000\"><strong>WARNING: some interfaces are configured incorrectly or not at all in /etc/config/network!</strong></font>"
+ end
+ if errorNoMetricList ~= " " then
+ warnings = warnings .. "<br /><br /><font color=\"ff0000\"><strong>WARNING: some interfaces have no metric configured in /etc/config/network!</strong></font>"
+ end
+ if errorDuplicateMetricList ~= " " then
+ warnings = warnings .. "<br /><br /><font color=\"ff0000\"><strong>WARNING: some interfaces have duplicate metrics configured in /etc/config/network!</strong></font>"
+ end
+ return warnings
+end
+
+-- ------ interface configuration ------ --
+
+dsp = require "luci.dispatcher"
+sys = require "luci.sys"
+ut = require "luci.util"
+
+interfaceNumber = 0
+metricList = ""
+errorFound = 0
+errorDuplicateMetricList = " "
+errorNetConfigList = " "
+errorNoMetricList = " "
+errorReliabilityList = " "
+errorRouteList = " "
+interfaceCheck()
+
+
+m5 = Map("mwan3", translate("MWAN Interface Configuration"),
+ translate(interfaceWarnings()))
+ m5:append(Template("mwan/config_css"))
+
+
+mwan_interface = m5:section(TypedSection, "interface", translate("Interfaces"),
+ translate("MWAN supports up to 250 physical and/or logical interfaces<br />" ..
+ "MWAN requires that all interfaces have a unique metric configured in /etc/config/network<br />" ..
+ "Names must match the interface name found in /etc/config/network (see advanced tab)<br />" ..
+ "Names may contain characters A-Z, a-z, 0-9, _ and no spaces<br />" ..
+ "Interfaces may not share the same name as configured members, policies or rules"))
+ mwan_interface.addremove = true
+ mwan_interface.dynamic = false
+ mwan_interface.sectionhead = "Interface"
+ mwan_interface.sortable = true
+ mwan_interface.template = "cbi/tblsection"
+ mwan_interface.extedit = dsp.build_url("admin", "network", "mwan", "configuration", "interface", "%s")
+ function mwan_interface.create(self, section)
+ TypedSection.create(self, section)
+ m5.uci:save("mwan3")
+ luci.http.redirect(dsp.build_url("admin", "network", "mwan", "configuration", "interface", section))
+ end
+
+
+enabled = mwan_interface:option(DummyValue, "enabled", translate("Enabled"))
+ enabled.rawhtml = true
+ function enabled.cfgvalue(self, s)
+ if self.map:get(s, "enabled") == "1" then
+ return "Yes"
+ else
+ return "No"
+ end
+ end
+
+track_ip = mwan_interface:option(DummyValue, "track_ip", translate("Tracking IP"))
+ track_ip.rawhtml = true
+ function track_ip.cfgvalue(self, s)
+ tracked = self.map:get(s, "track_ip")
+ if tracked then
+ local ipList = ""
+ for k,v in pairs(tracked) do
+ ipList = ipList .. v .. "<br />"
+ end
+ return ipList
+ else
+ return "—"
+ end
+ end
+
+reliability = mwan_interface:option(DummyValue, "reliability", translate("Tracking reliability"))
+ reliability.rawhtml = true
+ function reliability.cfgvalue(self, s)
+ if tracked then
+ return self.map:get(s, "reliability") or "—"
+ else
+ return "—"
+ end
+ end
+
+count = mwan_interface:option(DummyValue, "count", translate("Ping count"))
+ count.rawhtml = true
+ function count.cfgvalue(self, s)
+ if tracked then
+ return self.map:get(s, "count") or "—"
+ else
+ return "—"
+ end
+ end
+
+timeout = mwan_interface:option(DummyValue, "timeout", translate("Ping timeout"))
+ timeout.rawhtml = true
+ function timeout.cfgvalue(self, s)
+ if tracked then
+ local timeoutValue = self.map:get(s, "timeout")
+ if timeoutValue then
+ return timeoutValue .. "s"
+ else
+ return "—"
+ end
+ else
+ return "—"
+ end
+ end
+
+interval = mwan_interface:option(DummyValue, "interval", translate("Ping interval"))
+ interval.rawhtml = true
+ function interval.cfgvalue(self, s)
+ if tracked then
+ local intervalValue = self.map:get(s, "interval")
+ if intervalValue then
+ return intervalValue .. "s"
+ else
+ return "—"
+ end
+ else
+ return "—"
+ end
+ end
+
+down = mwan_interface:option(DummyValue, "down", translate("Interface down"))
+ down.rawhtml = true
+ function down.cfgvalue(self, s)
+ if tracked then
+ return self.map:get(s, "down") or "—"
+ else
+ return "—"
+ end
+ end
+
+up = mwan_interface:option(DummyValue, "up", translate("Interface up"))
+ up.rawhtml = true
+ function up.cfgvalue(self, s)
+ if tracked then
+ return self.map:get(s, "up") or "—"
+ else
+ return "—"
+ end
+ end
+
+metric = mwan_interface:option(DummyValue, "metric", translate("Metric"))
+ metric.rawhtml = true
+ function metric.cfgvalue(self, s)
+ local metricValue = sys.exec("uci -p /var/state get network." .. s .. ".metric")
+ if metricValue ~= "" then
+ return metricValue
+ else
+ return "—"
+ end
+ end
+
+errors = mwan_interface:option(DummyValue, "errors", translate("Errors"))
+ errors.rawhtml = true
+ function errors.cfgvalue(self, s)
+ if errorFound == 1 then
+ local mouseOver, lineBreak = "", ""
+ if string.find(errorReliabilityList, " " .. s .. " ") then
+ mouseOver = "Higher reliability requirement than there are tracking IP addresses"
+ lineBreak = " "
+ end
+ if string.find(errorRouteList, " " .. s .. " ") then
+ mouseOver = mouseOver .. lineBreak .. "No default route in the main routing table"
+ lineBreak = " "
+ end
+ if string.find(errorNetConfigList, " " .. s .. " ") then
+ mouseOver = mouseOver .. lineBreak .. "Configured incorrectly or not at all in /etc/config/network"
+ lineBreak = " "
+ end
+ if string.find(errorNoMetricList, " " .. s .. " ") then
+ mouseOver = mouseOver .. lineBreak .. "No metric configured in /etc/config/network"
+ lineBreak = " "
+ end
+ if string.find(errorDuplicateMetricList, " " .. s .. " ") then
+ mouseOver = mouseOver .. lineBreak .. "Duplicate metric configured in /etc/config/network"
+ end
+ if mouseOver == "" then
+ return ""
+ else
+ return "<span title=\"" .. mouseOver .. "\"><img src=\"/luci-static/resources/cbi/reset.gif\" alt=\"error\"></img></span>"
+ end
+ else
+ return ""
+ end
+ end
+
+
+return m5
--- /dev/null
+-- ------ extra functions ------ --
+
+function interfaceCheck()
+ metricValue = ut.trim(sys.exec("uci -p /var/state get network." .. arg[1] .. ".metric"))
+ if metricValue == "" then -- no metric
+ errorNoMetric = 1
+ else -- if metric exists create list of interface metrics to compare against for duplicates
+ uci.cursor():foreach("mwan3", "interface",
+ function (section)
+ local metricValue = ut.trim(sys.exec("uci -p /var/state get network." .. section[".name"] .. ".metric"))
+ metricList = metricList .. section[".name"] .. " " .. metricValue .. "\n"
+ end
+ )
+ -- compare metric against list
+ local metricDuplicateNumbers, metricDuplicates = sys.exec("echo '" .. metricList .. "' | awk '{print $2}' | uniq -d"), ""
+ for line in metricDuplicateNumbers:gmatch("[^\r\n]+") do
+ metricDuplicates = sys.exec("echo '" .. metricList .. "' | grep '" .. line .. "' | awk '{print $1}'")
+ errorDuplicateMetricList = errorDuplicateMetricList .. metricDuplicates
+ end
+ if sys.exec("echo '" .. errorDuplicateMetricList .. "' | grep -w " .. arg[1]) ~= "" then
+ errorDuplicateMetric = 1
+ end
+ end
+ -- check if this interface has a higher reliability requirement than track IPs configured
+ local trackingNumber = tonumber(ut.trim(sys.exec("echo $(uci -p /var/state get mwan3." .. arg[1] .. ".track_ip) | wc -w")))
+ if trackingNumber > 0 then
+ local reliabilityNumber = tonumber(ut.trim(sys.exec("uci -p /var/state get mwan3." .. arg[1] .. ".reliability")))
+ if reliabilityNumber and reliabilityNumber > trackingNumber then
+ errorReliability = 1
+ end
+ end
+ -- check if any interfaces are not properly configured in /etc/config/network or have no default route in main routing table
+ if ut.trim(sys.exec("uci -p /var/state get network." .. arg[1])) == "interface" then
+ local interfaceDevice = ut.trim(sys.exec("uci -p /var/state get network." .. arg[1] .. ".ifname"))
+ if interfaceDevice == "uci: Entry not found" or interfaceDevice == "" then
+ errorNetConfig = 1
+ errorRoute = 1
+ else
+ local routeCheck = ut.trim(sys.exec("route -n | awk '{if ($8 == \"" .. interfaceDevice .. "\" && $1 == \"0.0.0.0\" && $3 == \"0.0.0.0\") print $1}'"))
+ if routeCheck == "" then
+ errorRoute = 1
+ end
+ end
+ else
+ errorNetConfig = 1
+ errorRoute = 1
+ end
+end
+
+function interfaceWarnings() -- display warning messages at the top of the page
+ local warns, lineBreak = "", ""
+ if errorReliability == 1 then
+ warns = "<font color=\"ff0000\"><strong>WARNING: this interface has a higher reliability requirement than there are tracking IP addresses!</strong></font>"
+ lineBreak = "<br /><br />"
+ end
+ if errorRoute == 1 then
+ warns = warns .. lineBreak .. "<font color=\"ff0000\"><strong>WARNING: this interface has no default route in the main routing table!</strong></font>"
+ lineBreak = "<br /><br />"
+ end
+ if errorNetConfig == 1 then
+ warns = warns .. lineBreak .. "<font color=\"ff0000\"><strong>WARNING: this interface is configured incorrectly or not at all in /etc/config/network!</strong></font>"
+ lineBreak = "<br /><br />"
+ end
+ if errorNoMetric == 1 then
+ warns = warns .. lineBreak .. "<font color=\"ff0000\"><strong>WARNING: this interface has no metric configured in /etc/config/network!</strong></font>"
+ elseif errorDuplicateMetric == 1 then
+ warns = warns .. lineBreak .. "<font color=\"ff0000\"><strong>WARNING: this and other interfaces have duplicate metrics configured in /etc/config/network!</strong></font>"
+ end
+ return warns
+end
+
+-- ------ interface configuration ------ --
+
+dsp = require "luci.dispatcher"
+sys = require "luci.sys"
+ut = require "luci.util"
+arg[1] = arg[1] or ""
+
+metricValue = ""
+metricList = ""
+errorDuplicateMetricList = ""
+errorNoMetric = 0
+errorDuplicateMetric = 0
+errorRoute = 0
+errorNetConfig = 0
+errorReliability = 0
+interfaceCheck()
+
+
+m5 = Map("mwan3", translate("MWAN Interface Configuration - " .. arg[1]),
+ translate(interfaceWarnings()))
+ m5.redirect = dsp.build_url("admin", "network", "mwan", "configuration", "interface")
+
+
+mwan_interface = m5:section(NamedSection, arg[1], "interface", "")
+ mwan_interface.addremove = false
+ mwan_interface.dynamic = false
+
+
+enabled = mwan_interface:option(ListValue, "enabled", translate("Enabled"))
+ enabled.default = "1"
+ enabled:value("1", translate("Yes"))
+ enabled:value("0", translate("No"))
+
+track_ip = mwan_interface:option(DynamicList, "track_ip", translate("Tracking IP"),
+ translate("This IP address will be pinged to dermine if the link is up or down. Leave blank to assume interface is always online"))
+ track_ip.datatype = "ipaddr"
+
+reliability = mwan_interface:option(Value, "reliability", translate("Tracking reliability"),
+ translate("Acceptable values: 1-100. This many Tracking IP addresses must respond for the link to be deemed up"))
+ reliability.datatype = "range(1, 100)"
+ reliability.default = "1"
+
+count = mwan_interface:option(ListValue, "count", translate("Ping count"))
+ count.default = "1"
+ count:value("1")
+ count:value("2")
+ count:value("3")
+ count:value("4")
+ count:value("5")
+
+timeout = mwan_interface:option(ListValue, "timeout", translate("Ping timeout"))
+ timeout.default = "2"
+ timeout:value("1", translate("1 second"))
+ timeout:value("2", translate("2 seconds"))
+ timeout:value("3", translate("3 seconds"))
+ timeout:value("4", translate("4 seconds"))
+ timeout:value("5", translate("5 seconds"))
+ timeout:value("6", translate("6 seconds"))
+ timeout:value("7", translate("7 seconds"))
+ timeout:value("8", translate("8 seconds"))
+ timeout:value("9", translate("9 seconds"))
+ timeout:value("10", translate("10 seconds"))
+
+interval = mwan_interface:option(ListValue, "interval", translate("Ping interval"))
+ interval.default = "5"
+ interval:value("1", translate("1 second"))
+ interval:value("3", translate("3 seconds"))
+ interval:value("5", translate("5 seconds"))
+ interval:value("10", translate("10 seconds"))
+ interval:value("20", translate("20 seconds"))
+ interval:value("30", translate("30 seconds"))
+ interval:value("60", translate("1 minute"))
+ interval:value("300", translate("5 minutes"))
+ interval:value("600", translate("10 minutes"))
+ interval:value("900", translate("15 minutes"))
+ interval:value("1800", translate("30 minutes"))
+ interval:value("3600", translate("1 hour"))
+
+down = mwan_interface:option(ListValue, "down", translate("Interface down"),
+ translate("Interface will be deemed down after this many failed ping tests"))
+ down.default = "3"
+ down:value("1")
+ down:value("2")
+ down:value("3")
+ down:value("4")
+ down:value("5")
+ down:value("6")
+ down:value("7")
+ down:value("8")
+ down:value("9")
+ down:value("10")
+
+up = mwan_interface:option(ListValue, "up", translate("Interface up"),
+ translate("Downed interface will be deemed up after this many successful ping tests"))
+ up.default = "3"
+ up:value("1")
+ up:value("2")
+ up:value("3")
+ up:value("4")
+ up:value("5")
+ up:value("6")
+ up:value("7")
+ up:value("8")
+ up:value("9")
+ up:value("10")
+
+metric = mwan_interface:option(DummyValue, "metric", translate("Metric"),
+ translate("This displays the metric assigned to this interface in /etc/config/network"))
+ metric.rawhtml = true
+ function metric.cfgvalue(self, s)
+ if errorNoMetric == 0 then
+ return metricValue
+ else
+ return "—"
+ end
+ end
+
+
+return m5
--- /dev/null
+-- ------ member configuration ------ --
+
+ds = require "luci.dispatcher"
+
+
+m5 = Map("mwan3", translate("MWAN Member Configuration"))
+ m5:append(Template("mwan/config_css"))
+
+
+mwan_member = m5:section(TypedSection, "member", translate("Members"),
+ translate("Members are profiles attaching a metric and weight to an MWAN interface<br />" ..
+ "Names may contain characters A-Z, a-z, 0-9, _ and no spaces<br />" ..
+ "Members may not share the same name as configured interfaces, policies or rules"))
+ mwan_member.addremove = true
+ mwan_member.dynamic = false
+ mwan_member.sectionhead = "Member"
+ mwan_member.sortable = true
+ mwan_member.template = "cbi/tblsection"
+ mwan_member.extedit = ds.build_url("admin", "network", "mwan", "configuration", "member", "%s")
+ function mwan_member.create(self, section)
+ TypedSection.create(self, section)
+ m5.uci:save("mwan3")
+ luci.http.redirect(ds.build_url("admin", "network", "mwan", "configuration", "member", section))
+ end
+
+
+interface = mwan_member:option(DummyValue, "interface", translate("Interface"))
+ interface.rawhtml = true
+ function interface.cfgvalue(self, s)
+ return self.map:get(s, "interface") or "—"
+ end
+
+metric = mwan_member:option(DummyValue, "metric", translate("Metric"))
+ metric.rawhtml = true
+ function metric.cfgvalue(self, s)
+ return self.map:get(s, "metric") or "1"
+ end
+
+weight = mwan_member:option(DummyValue, "weight", translate("Weight"))
+ weight.rawhtml = true
+ function weight.cfgvalue(self, s)
+ return self.map:get(s, "weight") or "1"
+ end
+
+
+return m5
--- /dev/null
+-- ------ extra functions ------ --
+
+function cbi_add_interface(field)
+ uci.cursor():foreach("mwan3", "interface",
+ function (section)
+ field:value(section[".name"])
+ end
+ )
+end
+
+-- ------ member configuration ------ --
+
+dsp = require "luci.dispatcher"
+arg[1] = arg[1] or ""
+
+
+m5 = Map("mwan3", translate("MWAN Member Configuration - ") .. arg[1])
+ m5.redirect = dsp.build_url("admin", "network", "mwan", "configuration", "member")
+
+
+mwan_member = m5:section(NamedSection, arg[1], "member", "")
+ mwan_member.addremove = false
+ mwan_member.dynamic = false
+
+
+interface = mwan_member:option(Value, "interface", translate("Interface"))
+ cbi_add_interface(interface)
+
+metric = mwan_member:option(Value, "metric", translate("Metric"),
+ translate("Acceptable values: 1-1000. Defaults to 1 if not set"))
+ metric.datatype = "range(1, 1000)"
+
+weight = mwan_member:option(Value, "weight", translate("Weight"),
+ translate("Acceptable values: 1-1000. Defaults to 1 if not set"))
+ weight.datatype = "range(1, 1000)"
+
+
+-- ------ currently configured interfaces ------ --
+
+mwan_interface = m5:section(TypedSection, "interface", translate("Currently Configured Interfaces"))
+ mwan_interface.addremove = false
+ mwan_interface.dynamic = false
+ mwan_interface.sortable = false
+ mwan_interface.template = "cbi/tblsection"
+
+
+return m5
--- /dev/null
+-- ------ extra functions ------ --
+
+function policyCheck() -- check to see if any policy names exceed the maximum of 15 characters
+ uci.cursor():foreach("mwan3", "policy",
+ function (section)
+ if string.len(section[".name"]) > 15 then
+ nameTooLong = 1
+ err_name_list = err_name_list .. section[".name"] .. " "
+ end
+ end
+ )
+end
+
+function policyWarn() -- display status and warning messages at the top of the page
+ if nameTooLong == 1 then
+ return "<font color=\"ff0000\"><strong>WARNING: Some policies have names exceeding the maximum of 15 characters!</strong></font>"
+ else
+ return ""
+ end
+end
+
+-- ------ policy configuration ------ --
+
+ds = require "luci.dispatcher"
+sys = require "luci.sys"
+
+nameTooLong = 0
+err_name_list = " "
+policyCheck()
+
+
+m5 = Map("mwan3", translate("MWAN Policy Configuration"),
+ translate(policyWarn()))
+ m5:append(Template("mwan/config_css"))
+
+
+mwan_policy = m5:section(TypedSection, "policy", translate("Policies"),
+ translate("Policies are profiles grouping one or more members controlling how MWAN distributes traffic<br />" ..
+ "Member interfaces with lower metrics are used first. Interfaces with the same metric load-balance<br />" ..
+ "Load-balanced member interfaces distribute more traffic out those with higher weights<br />" ..
+ "Names may contain characters A-Z, a-z, 0-9, _ and no spaces. Names must be 15 characters or less<br />" ..
+ "Policies may not share the same name as configured interfaces, members or rules"))
+ mwan_policy.addremove = true
+ mwan_policy.dynamic = false
+ mwan_policy.sectionhead = "Policy"
+ mwan_policy.sortable = true
+ mwan_policy.template = "cbi/tblsection"
+ mwan_policy.extedit = ds.build_url("admin", "network", "mwan", "configuration", "policy", "%s")
+ function mwan_policy.create(self, section)
+ TypedSection.create(self, section)
+ m5.uci:save("mwan3")
+ luci.http.redirect(ds.build_url("admin", "network", "mwan", "configuration", "policy", section))
+ end
+
+
+use_member = mwan_policy:option(DummyValue, "use_member", translate("Members assigned"))
+ use_member.rawhtml = true
+ function use_member.cfgvalue(self, s)
+ local memberConfig, memberList = self.map:get(s, "use_member"), ""
+ if memberConfig then
+ for k,v in pairs(memberConfig) do
+ memberList = memberList .. v .. "<br />"
+ end
+ return memberList
+ else
+ return "—"
+ end
+
+ end
+
+last_resort = mwan_policy:option(DummyValue, "last_resort", translate("Last resort"))
+ last_resort.rawhtml = true
+ function last_resort.cfgvalue(self, s)
+ local action = self.map:get(s, "last_resort")
+ if action == "blackhole" then
+ return "blackhole (drop)"
+ elseif action == "default" then
+ return "default (use main routing table)"
+ else
+ return "unreachable (reject)"
+ end
+ end
+
+errors = mwan_policy:option(DummyValue, "errors", translate("Errors"))
+ errors.rawhtml = true
+ function errors.cfgvalue(self, s)
+ if not string.find(err_name_list, " " .. s .. " ") then
+ return ""
+ else
+ return "<span title=\"Name exceeds 15 characters\"><img src=\"/luci-static/resources/cbi/reset.gif\" alt=\"error\"></img></span>"
+ end
+ end
+
+
+return m5
--- /dev/null
+-- ------ extra functions ------ --
+
+function policyCheck() -- check to see if this policy's name exceed the maximum of 15 characters
+ policyNameLength = string.len(arg[1])
+ if policyNameLength > 15 then
+ nameTooLong = 1
+ end
+end
+
+function policyWarn() -- display status and warning messages at the top of the page
+ if nameTooLong == 1 then
+ return "<font color=\"ff0000\"><strong>WARNING: this policy's name is " .. policyNameLength .. " characters exceeding the maximum of 15!</strong></font>"
+ else
+ return ""
+ end
+end
+
+function cbiAddMember(field)
+ uci.cursor():foreach("mwan3", "member",
+ function (section)
+ field:value(section[".name"])
+ end
+ )
+end
+
+-- ------ policy configuration ------ --
+
+dsp = require "luci.dispatcher"
+arg[1] = arg[1] or ""
+
+nameTooLong = 0
+policyCheck()
+
+
+m5 = Map("mwan3", translate("MWAN Policy Configuration - " .. arg[1]),
+ translate(policyWarn()))
+ m5.redirect = dsp.build_url("admin", "network", "mwan", "configuration", "policy")
+
+
+mwan_policy = m5:section(NamedSection, arg[1], "policy", "")
+ mwan_policy.addremove = false
+ mwan_policy.dynamic = false
+
+
+use_member = mwan_policy:option(DynamicList, "use_member", translate("Member used"))
+ cbiAddMember(use_member)
+
+last_resort = mwan_policy:option(ListValue, "last_resort", translate("Last resort"),
+ translate("When all policy members are offline use this behavior for matched traffic"))
+ last_resort.default = "unreachable"
+ last_resort:value("unreachable", translate("unreachable (reject)"))
+ last_resort:value("blackhole", translate("blackhole (drop)"))
+ last_resort:value("default", translate("default (use main routing table)"))
+
+
+-- ------ currently configured members ------ --
+
+mwan_member = m5:section(TypedSection, "member", translate("Currently Configured Members"))
+ mwan_member.addremove = false
+ mwan_member.dynamic = false
+ mwan_member.sortable = false
+ mwan_member.template = "cbi/tblsection"
+
+
+return m5
--- /dev/null
+-- ------ extra functions ------ --
+
+function ruleCheck() -- determine if rules needs a proper protocol configured
+ uci.cursor():foreach("mwan3", "rule",
+ function (section)
+ local sourcePort = ut.trim(sys.exec("uci -p /var/state get mwan3." .. section[".name"] .. ".src_port"))
+ local destPort = ut.trim(sys.exec("uci -p /var/state get mwan3." .. section[".name"] .. ".dest_port"))
+ if sourcePort ~= "" or destPort ~= "" then -- ports configured
+ local protocol = ut.trim(sys.exec("uci -p /var/state get mwan3." .. section[".name"] .. ".proto"))
+ if protocol == "" or protocol == "all" then -- no or improper protocol
+ error_protocol_list = error_protocol_list .. section[".name"] .. " "
+ end
+ end
+ end
+ )
+end
+
+function ruleWarn() -- display warning messages at the top of the page
+ if error_protocol_list ~= " " then
+ return "<font color=\"ff0000\"><strong>WARNING: some rules have a port configured with no or improper protocol specified! Please configure a specific protocol!</strong></font>"
+ else
+ return ""
+ end
+end
+
+-- ------ rule configuration ------ --
+
+dsp = require "luci.dispatcher"
+sys = require "luci.sys"
+ut = require "luci.util"
+
+error_protocol_list = " "
+ruleCheck()
+
+
+m5 = Map("mwan3", translate("MWAN Rule Configuration"),
+ translate(ruleWarn()))
+ m5:append(Template("mwan/config_css"))
+
+
+mwan_rule = m5:section(TypedSection, "rule", translate("Traffic Rules"),
+ translate("Rules specify which traffic will use a particular MWAN policy based on IP address, port or protocol<br />" ..
+ "Rules are matched from top to bottom. Rules below a matching rule are ignored. Traffic not matching any rule is routed using the main routing table<br />" ..
+ "Traffic destined for known (other than default) networks is handled by the main routing table. Traffic matching a rule, but all WAN interfaces for that policy are down will be blackholed<br />" ..
+ "Names may contain characters A-Z, a-z, 0-9, _ and no spaces<br />" ..
+ "Rules may not share the same name as configured interfaces, members or policies"))
+ mwan_rule.addremove = true
+ mwan_rule.anonymous = false
+ mwan_rule.dynamic = false
+ mwan_rule.sectionhead = "Rule"
+ mwan_rule.sortable = true
+ mwan_rule.template = "cbi/tblsection"
+ mwan_rule.extedit = dsp.build_url("admin", "network", "mwan", "configuration", "rule", "%s")
+ function mwan_rule.create(self, section)
+ TypedSection.create(self, section)
+ m5.uci:save("mwan3")
+ luci.http.redirect(dsp.build_url("admin", "network", "mwan", "configuration", "rule", section))
+ end
+
+
+src_ip = mwan_rule:option(DummyValue, "src_ip", translate("Source address"))
+ src_ip.rawhtml = true
+ function src_ip.cfgvalue(self, s)
+ return self.map:get(s, "src_ip") or "—"
+ end
+
+src_port = mwan_rule:option(DummyValue, "src_port", translate("Source port"))
+ src_port.rawhtml = true
+ function src_port.cfgvalue(self, s)
+ return self.map:get(s, "src_port") or "—"
+ end
+
+dest_ip = mwan_rule:option(DummyValue, "dest_ip", translate("Destination address"))
+ dest_ip.rawhtml = true
+ function dest_ip.cfgvalue(self, s)
+ return self.map:get(s, "dest_ip") or "—"
+ end
+
+dest_port = mwan_rule:option(DummyValue, "dest_port", translate("Destination port"))
+ dest_port.rawhtml = true
+ function dest_port.cfgvalue(self, s)
+ return self.map:get(s, "dest_port") or "—"
+ end
+
+proto = mwan_rule:option(DummyValue, "proto", translate("Protocol"))
+ proto.rawhtml = true
+ function proto.cfgvalue(self, s)
+ return self.map:get(s, "proto") or "all"
+ end
+
+sticky = mwan_rule:option(DummyValue, "sticky", translate("Sticky"))
+ sticky.rawhtml = true
+ function sticky.cfgvalue(self, s)
+ if self.map:get(s, "sticky") == "1" then
+ stickied = 1
+ return "Yes"
+ else
+ stickied = nil
+ return "No"
+ end
+ end
+
+timeout = mwan_rule:option(DummyValue, "timeout", translate("Sticky timeout"))
+ timeout.rawhtml = true
+ function timeout.cfgvalue(self, s)
+ if stickied then
+ local timeoutValue = self.map:get(s, "timeout")
+ if timeoutValue then
+ return timeoutValue .. "s"
+ else
+ return "600s"
+ end
+ else
+ return "—"
+ end
+ end
+
+ipset = mwan_rule:option(DummyValue, "ipset", translate("IPset"))
+ ipset.rawhtml = true
+ function ipset.cfgvalue(self, s)
+ return self.map:get(s, "ipset") or "—"
+ end
+
+use_policy = mwan_rule:option(DummyValue, "use_policy", translate("Policy assigned"))
+ use_policy.rawhtml = true
+ function use_policy.cfgvalue(self, s)
+ return self.map:get(s, "use_policy") or "—"
+ end
+
+errors = mwan_rule:option(DummyValue, "errors", translate("Errors"))
+ errors.rawhtml = true
+ function errors.cfgvalue(self, s)
+ if not string.find(error_protocol_list, " " .. s .. " ") then
+ return ""
+ else
+ return "<span title=\"No protocol specified\"><img src=\"/luci-static/resources/cbi/reset.gif\" alt=\"error\"></img></span>"
+ end
+ end
+
+
+return m5
--- /dev/null
+-- ------ extra functions ------ --
+
+function ruleCheck() -- determine if rule needs a protocol specified
+ local sourcePort = ut.trim(sys.exec("uci -p /var/state get mwan3." .. arg[1] .. ".src_port"))
+ local destPort = ut.trim(sys.exec("uci -p /var/state get mwan3." .. arg[1] .. ".dest_port"))
+ if sourcePort ~= "" or destPort ~= "" then -- ports configured
+ local protocol = ut.trim(sys.exec("uci -p /var/state get mwan3." .. arg[1] .. ".proto"))
+ if protocol == "" or protocol == "all" then -- no or improper protocol
+ error_protocol = 1
+ end
+ end
+end
+
+function ruleWarn() -- display warning message at the top of the page
+ if error_protocol == 1 then
+ return "<font color=\"ff0000\"><strong>WARNING: this rule is incorrectly configured with no or improper protocol specified! Please configure a specific protocol!</strong></font>"
+ else
+ return ""
+ end
+end
+
+function cbiAddPolicy(field)
+ uci.cursor():foreach("mwan3", "policy",
+ function (section)
+ field:value(section[".name"])
+ end
+ )
+end
+
+function cbiAddProtocol(field)
+ local protocols = ut.trim(sys.exec("cat /etc/protocols | grep ' # ' | awk '{print $1}' | grep -vw -e 'ip' -e 'tcp' -e 'udp' -e 'icmp' -e 'esp' | grep -v 'ipv6' | sort | tr '\n' ' '"))
+ for p in string.gmatch(protocols, "%S+") do
+ field:value(p)
+ end
+end
+
+-- ------ rule configuration ------ --
+
+dsp = require "luci.dispatcher"
+sys = require "luci.sys"
+ut = require "luci.util"
+arg[1] = arg[1] or ""
+
+error_protocol = 0
+ruleCheck()
+
+
+m5 = Map("mwan3", translate("MWAN Rule Configuration - ") .. arg[1],
+ translate(ruleWarn()))
+ m5.redirect = dsp.build_url("admin", "network", "mwan", "configuration", "rule")
+
+
+mwan_rule = m5:section(NamedSection, arg[1], "rule", "")
+ mwan_rule.addremove = false
+ mwan_rule.dynamic = false
+
+
+src_ip = mwan_rule:option(Value, "src_ip", translate("Source address"),
+ translate("Supports CIDR notation (eg \"192.168.100.0/24\") without quotes"))
+ src_ip.datatype = ipaddr
+
+src_port = mwan_rule:option(Value, "src_port", translate("Source port"),
+ translate("May be entered as a single or multiple port(s) (eg \"22\" or \"80,443\") or as a portrange (eg \"1024:2048\") without quotes"))
+
+dest_ip = mwan_rule:option(Value, "dest_ip", translate("Destination address"),
+ translate("Supports CIDR notation (eg \"192.168.100.0/24\") without quotes"))
+ dest_ip.datatype = ipaddr
+
+dest_port = mwan_rule:option(Value, "dest_port", translate("Destination port"),
+ translate("May be entered as a single or multiple port(s) (eg \"22\" or \"80,443\") or as a portrange (eg \"1024:2048\") without quotes"))
+
+proto = mwan_rule:option(Value, "proto", translate("Protocol"),
+ translate("View the contents of /etc/protocols for protocol descriptions"))
+ proto.default = "all"
+ proto.rmempty = false
+ proto:value("all")
+ proto:value("ip")
+ proto:value("tcp")
+ proto:value("udp")
+ proto:value("icmp")
+ proto:value("esp")
+ cbiAddProtocol(proto)
+
+sticky = mwan_rule:option(ListValue, "sticky", translate("Sticky"),
+ translate("Traffic from the same source IP address that previously matched this rule within the sticky timeout period will use the same WAN interface"))
+ sticky.default = "0"
+ sticky:value("1", translate("Yes"))
+ sticky:value("0", translate("No"))
+
+timeout = mwan_rule:option(Value, "timeout", translate("Sticky timeout"),
+ translate("Seconds. Acceptable values: 1-1000000. Defaults to 600 if not set"))
+ timeout.datatype = "range(1, 1000000)"
+
+ipset = mwan_rule:option(Value, "ipset", translate("IPset"),
+ translate("Name of IPset rule. Requires IPset rule in /etc/dnsmasq.conf (eg \"ipset=/youtube.com/youtube\")"))
+
+use_policy = mwan_rule:option(Value, "use_policy", translate("Policy assigned"))
+ cbiAddPolicy(use_policy)
+ use_policy:value("unreachable", translate("unreachable (reject)"))
+ use_policy:value("blackhole", translate("blackhole (drop)"))
+ use_policy:value("default", translate("default (use main routing table)"))
+
+
+-- ------ currently configured policies ------ --
+
+mwan_policy = m5:section(TypedSection, "policy", translate("Currently Configured Policies"))
+ mwan_policy.addremove = false
+ mwan_policy.dynamic = false
+ mwan_policy.sortable = false
+ mwan_policy.template = "cbi/tblsection"
+
+
+return m5
--- /dev/null
+<%+mwan/openwrt_overview_status%>
--- /dev/null
+<%+header%>
+
+<ul class="cbi-tabmenu">
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/hotplugscript")%>"><%:Hotplug Script%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/mwanconfig")%>"><%:MWAN Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/networkconfig")%>"><%:Network Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/wirelessconfig")%>"><%:Wireless Config%></a></li>
+ <li class="cbi-tab"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/diagnostics")%>"><%:Diagnostics%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/troubleshooting")%>"><%:Troubleshooting%></a></li>
+</ul>
+
+<%
+ local uci = require "luci.model.uci"
+
+ interfaceNames = ""
+ uci.cursor():foreach("mwan3", "interface",
+ function (section)
+ interfaceNames = interfaceNames .. section[".name"] .. " "
+ end
+ )
+%>
+
+<script type="text/javascript" src="<%=resource%>/cbi.js"></script>
+<script type="text/javascript">//<![CDATA[
+ var stxhr = new XHR();
+
+ function update_status(tool, task)
+ {
+ var iface = document.getElementById('mwaniface').value;
+ var output = document.getElementById('diag_output');
+
+ if (tool == "service")
+ {
+ output.innerHTML =
+ '<img src="<%=resource%>/icons/loading.gif" alt="<%:Loading%>" style="padding: 20px; vertical-align: middle;" /> ' +
+ "Waiting for MWAN to " + task + "..."
+ ;
+ }
+ else
+ {
+ output.innerHTML =
+ '<img src="<%=resource%>/icons/loading.gif" alt="<%:Loading%>" style="padding: 20px; vertical-align: middle;" /> ' +
+ "Waiting for diagnostic results..."
+ ;
+ }
+
+ output.parentNode.style.display = 'block';
+ output.style.display = 'inline';
+
+ stxhr.get('<%=luci.dispatcher.build_url("admin", "network", "mwan", "advanced")%>/diagnostics_display' + '/' + iface + '/' + tool + '/' + task, null,
+ function(x, mArray)
+ {
+ if (mArray.diagnostics)
+ {
+ output.innerHTML = String.format('<pre id="diag_output_css">%h</pre>', mArray.diagnostics[0]);
+ }
+ else
+ {
+ output.innerHTML = '<pre id="diag_output_css"><strong>No diagnostic results returned</strong></pre>';
+ }
+ }
+ );
+ }
+//]]></script>
+
+<div id="mwan_diagnostics" class="cbi-map">
+ <fieldset id="diag_select" class="cbi-section">
+ <legend><%:MWAN Interface Diagnostics%></legend>
+ <select id="mwaniface">
+ <% for z in interfaceNames:gmatch("[^ ]+") do -%><option value="<%=z%>"><%=z%></option><%- end %>
+ </select>
+ <div id="buttoncss">
+ <input type="button" value="<%:Ping default gateway%>" class="cbi-button cbi-button-apply" onclick="update_status('ping', 'gateway')" />
+ <input type="button" value="<%:Ping tracking IP%>" class="cbi-button cbi-button-apply" onclick="update_status('ping', 'track_ip')" />
+ <input type="button" value="<%:Check IP rules%>" class="cbi-button cbi-button-apply" onclick="update_status('rulechk', null)" />
+ <input type="button" value="<%:Check routing table%>" class="cbi-button cbi-button-apply" onclick="update_status('routechk', null)" />
+ <input type="button" value="<%:Hotplug ifup%>" class="cbi-button cbi-button-apply" onclick="update_status('hotplug', 'ifup')" />
+ <input type="button" value="<%:Hotplug ifdown%>" class="cbi-button cbi-button-apply" onclick="update_status('hotplug', 'ifdown')" />
+ </div>
+ </fieldset>
+ <fieldset id="diag_select" class="cbi-section">
+ <legend><%:MWAN Service Control%></legend>
+ <div id="buttoncss">
+ <input type="button" value="<%:Restart MWAN%>" class="cbi-button cbi-button-apply" onclick="update_status('service', 'restart')" />
+ <input type="button" value="<%:Stop MWAN%>" class="cbi-button cbi-button-apply" onclick="update_status('service', 'stop')" />
+ <input type="button" value="<%:Start MWAN%>" class="cbi-button cbi-button-apply" onclick="update_status('service', 'start')" />
+ </div>
+ </fieldset>
+ <fieldset class="cbi-section" style="display:none">
+ <legend><%:Diagnostic Results%></legend>
+ <div id="diag_output"></div>
+ </fieldset>
+</div>
+
+<style type="text/css">
+ .container { /* container for entire page. fixes bootstrap theme's ridiculously small page width */
+ max-width: none;
+ margin-left: 30px;
+ padding-right: 30px;
+ width: auto;
+ }
+ #mwan_diagnostics {
+ background-color: #FFFFFF;
+ border: 1px dotted #555555;
+ padding: 20px;
+ }
+ #diag_select {
+ padding: 12px 20px 20px 20px;
+ }
+ #mwaniface {
+ float: left;
+ margin: 8px 20px 0px 0px;
+ }
+ #buttoncss {
+ display: table;
+ float: left;
+ text-align: left;
+ }
+ .cbi-button {
+ margin: 8px 20px 0px 0px;
+ min-width: 153px;
+ }
+ #diag_output_css {
+ padding: 20px;
+ text-align: left;
+ }
+</style>
+
+<%+footer%>
--- /dev/null
+<ul class="cbi-tabmenu">
+ <li class="cbi-tab"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/hotplugscript")%>"><%:Hotplug Script%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/mwanconfig")%>"><%:MWAN Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/networkconfig")%>"><%:Network Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/wirelessconfig")%>"><%:Wireless Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/diagnostics")%>"><%:Diagnostics%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/troubleshooting")%>"><%:Troubleshooting%></a></li>
+</ul>
+
+<style type="text/css">
+ .container { /* container for entire page. fixes bootstrap theme's ridiculously small page width */
+ max-width: none;
+ margin: 0px 0px 0px 30px;
+ padding-right: 30px;
+ width: auto;
+ }
+ .cbi-section-node {
+ margin-top: 20px;
+ }
+ .cbi-section {
+ border: 1px dotted #555555;
+ padding: 20px;
+ }
+</style>
--- /dev/null
+<ul class="cbi-tabmenu">
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/hotplugscript")%>"><%:Hotplug Script%></a></li>
+ <li class="cbi-tab"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/mwanconfig")%>"><%:MWAN Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/networkconfig")%>"><%:Network Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/wirelessconfig")%>"><%:Wireless Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/diagnostics")%>"><%:Diagnostics%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/troubleshooting")%>"><%:Troubleshooting%></a></li>
+</ul>
+
+<style type="text/css">
+ .container { /* container for entire page. fixes bootstrap theme's ridiculously small page width */
+ max-width: none;
+ margin: 0px 0px 0px 30px;
+ padding-right: 30px;
+ width: auto;
+ }
+ .cbi-section-node {
+ margin-top: 20px;
+ }
+ .cbi-section {
+ border: 1px dotted #555555;
+ padding: 20px;
+ }
+</style>
--- /dev/null
+<ul class="cbi-tabmenu">
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/hotplugscript")%>"><%:Hotplug Script%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/mwanconfig")%>"><%:MWAN Config%></a></li>
+ <li class="cbi-tab"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/networkconfig")%>"><%:Network Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/wirelessconfig")%>"><%:Wireless Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/diagnostics")%>"><%:Diagnostics%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/troubleshooting")%>"><%:Troubleshooting%></a></li>
+</ul>
+
+<style type="text/css">
+ .container { /* container for entire page. fixes bootstrap theme's ridiculously small page width */
+ max-width: none;
+ margin: 0px 0px 0px 30px;
+ padding-right: 30px;
+ width: auto;
+ }
+ .cbi-section-node {
+ margin-top: 20px;
+ }
+ .cbi-section {
+ border: 1px dotted #555555;
+ padding: 20px;
+ }
+</style>
--- /dev/null
+<%+header%>
+
+<ul class="cbi-tabmenu">
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/hotplugscript")%>"><%:Hotplug Script%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/mwanconfig")%>"><%:MWAN Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/networkconfig")%>"><%:Network Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/wirelessconfig")%>"><%:Wireless Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/diagnostics")%>"><%:Diagnostics%></a></li>
+ <li class="cbi-tab"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/troubleshooting")%>"><%:Troubleshooting%></a></li>
+</ul>
+
+<script type="text/javascript" src="<%=resource%>/cbi.js"></script>
+<script type="text/javascript">//<![CDATA[
+ XHR.poll(15, '<%=luci.dispatcher.build_url("admin", "network", "mwan", "advanced", "troubleshooting_display")%>', null,
+ function(x, mArray)
+ {
+ var tshoot = document.getElementById('troubleshoot_text');
+ if (mArray.versions)
+ {
+ var versions = '<span class="description">Software versions : </span><br /><br />';
+ var mwanConfig = '<br /><br /><span class="description">Output of "cat /etc/config/mwan3" : </span><br /><br />';
+ var netConfig = '<br /><br /><span class="description">Output of "cat /etc/config/network" : </span><br /><br />';
+ var wifiConfig = '<br /><br /><span class="description">Output of "cat /etc/config/wireless" : </span><br /><br />';
+ var ifconfig = '<br /><br /><span class="description">Output of "ifconfig" : </span><br /><br />';
+ var ipRoute = '<br /><br /><span class="description">Output of "route -n" : </span><br /><br />';
+ var ipRuleShow = '<br /><br /><span class="description">Output of "ip rule show" : </span><br /><br />';
+ var routeListTable = '<br /><br /><span class="description">Output of "ip route list table 1-250" : </span><br /><br />';
+ var firewallOut = '<br /><br /><span class="description">Firewall default output policy (must be ACCEPT) : </span><br /><br />';
+ var iptables = '<br /><br /><span class="description">Output of "iptables -L -t mangle -v -n" : </span><br /><br />';
+ tshoot.innerHTML = String.format(
+ '<pre>%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s</pre>',
+ versions, mArray.versions[0], mwanConfig, mArray.mwanconfig[0], netConfig, mArray.netconfig[0],
+ wifiConfig, mArray.wificonfig[0], ifconfig, mArray.ifconfig[0], ipRoute, mArray.routeshow[0],
+ ipRuleShow, mArray.iprule[0], routeListTable, mArray.routelist[0], firewallOut, mArray.firewallout[0],
+ iptables, mArray.iptables[0]
+ );
+ }
+ else
+ {
+ tshoot.innerHTML = '<strong>Error collecting troubleshooting information</strong>';
+ }
+ }
+ );
+//]]></script>
+
+<div id="troubleshoot">
+ <fieldset class="cbi-section">
+ <legend><%:Troubleshooting Data%></legend>
+ <div id="troubleshoot_text"><img src="<%=resource%>/icons/loading.gif" alt="<%:Loading%>" style="vertical-align:middle" /> Collecting data...</div>
+ </fieldset>
+</div>
+
+<style type="text/css">
+ .container { /* container for entire page. fixes bootstrap theme's ridiculously small page width */
+ max-width: none;
+ margin-left: 30px;
+ padding-right: 30px;
+ width: auto;
+ }
+ #troubleshoot {
+ background-color: #FFFFFF;
+ border: 1px dotted #555555;
+ padding: 20px;
+ }
+ #troubleshoot_text {
+ padding: 20px;
+ text-align: left;
+ }
+ .description {
+ background-color: rgb(78, 186, 241);
+ }
+</style>
+
+<%+footer%>
--- /dev/null
+<ul class="cbi-tabmenu">
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/hotplugscript")%>"><%:Hotplug Script%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/mwanconfig")%>"><%:MWAN Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/networkconfig")%>"><%:Network Config%></a></li>
+ <li class="cbi-tab"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/wirelessconfig")%>"><%:Wireless Config%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/diagnostics")%>"><%:Diagnostics%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/advanced/troubleshooting")%>"><%:Troubleshooting%></a></li>
+</ul>
+
+<style type="text/css">
+ .container { /* container for entire page. fixes bootstrap theme's ridiculously small page width */
+ max-width: none;
+ margin: 0px 0px 0px 30px;
+ padding-right: 30px;
+ width: auto;
+ }
+ .cbi-section-node {
+ margin-top: 20px;
+ }
+ .cbi-section {
+ border: 1px dotted #555555;
+ padding: 20px;
+ }
+</style>
--- /dev/null
+<style type="text/css">
+ .container { /* container for entire page. fixes bootstrap theme's ridiculously small page width */
+ max-width: none;
+ margin-left: 30px;
+ padding-right: 30px;
+ width: auto;
+ }
+ table td { /* cells showing the configuration values */
+ padding: 0px;
+ text-align: center;
+ vertical-align: middle;
+ }
+ table th { /* column for configuration section name */
+ padding: 0px;
+ text-align: center;
+ vertical-align: middle;
+ }
+ table tbody th { /* column for configuration section name */
+ padding: 0px;
+ vertical-align: middle;
+ }
+ .cbi-section-node table div { /* rows */
+ padding-top: 5px;
+ }
+ table.cbi-section-table td.cbi-section-table-cell { /* sort buttons column */
+ text-align: center;
+ }
+ .cbi-section h3 {
+ color: rgb(85, 85, 85);
+ font-family: Trebuchet MS,Verdana,sans-serif;
+ font-style: italic;
+ font-weight: normal;
+ }
+</style>
--- /dev/null
+<script type="text/javascript">//<![CDATA[
+ XHR.poll(5, '<%=luci.dispatcher.build_url("admin", "network", "mwan", "overview", "interface_status")%>', null,
+ function(x, mArray)
+ {
+ var status = document.getElementById('mwan_status_text');
+ if (mArray.wans)
+ {
+ var temp = '';
+ for ( var i = 0; i < mArray.wans.length; i++ )
+ {
+ var stat = '';
+ var cssc = '';
+ switch (mArray.wans[i].status)
+ {
+ case 'online':
+ stat = 'Online (tracking active)';
+ cssc = 'wanon';
+ break;
+ case 'notMonitored':
+ stat = 'Online (tracking off)';
+ cssc = 'wanon';
+ break;
+ case 'offline':
+ stat = 'Offline';
+ cssc = 'wanoff';
+ break;
+ case 'notEnabled':
+ stat = 'Disabled';
+ cssc = 'wanoff';
+ break;
+ }
+ temp += String.format(
+ '<span class="%s"><strong>%s (<a href="%q">%s</a>)</strong><br />%s</span>',
+ cssc, mArray.wans[i].name, mArray.wans[i].link, mArray.wans[i].ifname, stat
+ );
+ }
+ status.innerHTML = temp;
+ }
+ else
+ {
+ status.innerHTML = '<strong>No MWAN interfaces found</strong>';
+ }
+ }
+ );
+//]]></script>
+
+<fieldset id="interface_field" class="cbi-section">
+ <legend><%:MWAN Interface Live Status%></legend>
+ <div id="mwan_status_text"><img src="<%=resource%>/icons/loading.gif" alt="<%:Loading%>" style="vertical-align:middle" /> Collecting data...</div>
+</fieldset>
+
+<style type="text/css">
+ .container { /* container for entire page. fixes bootstrap theme's ridiculously small page width */
+ max-width: 1044px;
+ }
+ #interface_field {
+ padding: 12px 20px 20px 20px;
+ }
+ #mwan_status_text {
+ display: table;
+ font-size: 14px;
+ margin: auto;
+ max-width: 1044px;
+ min-width: 246px;
+ width: 100%;
+ }
+ .wanon {
+ background-color: rgb(144, 240, 144);
+ }
+ .wanoff {
+ background-color: rgb(240, 144, 144);
+ }
+ .wanon, .wanoff {
+ border-radius: 60px;
+ box-shadow: 0px 2px 5px -3px;
+ float: left;
+ margin: 8px 3px 0px 3px;
+ min-height: 30px;
+ min-width: 235px;
+ padding: 5px 10px 8px 10px;
+ text-align: center;
+ }
+</style>
--- /dev/null
+<%+header%>
+
+<ul class="cbi-tabmenu">
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/overview")%>"><%:Interface Status%></a></li>
+ <li class="cbi-tab"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/overview/overview_detailed")%>"><%:Detailed Status%></a></li>
+</ul>
+
+<script type="text/javascript" src="<%=resource%>/cbi.js"></script>
+<script type="text/javascript">//<![CDATA[
+ XHR.poll(5, '<%=luci.dispatcher.build_url("admin", "network", "mwan", "overview", "detailed_status")%>', null,
+ function(x, mArray)
+ {
+ var status = document.getElementById('mwan_detail_text');
+ if (mArray.mwandetail)
+ {
+ status.innerHTML = String.format('<pre>%s</pre>', mArray.mwandetail[0]);
+ }
+ else
+ {
+ status.innerHTML = '<strong>No detailed status information available</strong>';
+ }
+ }
+ );
+//]]></script>
+
+<div id="mwan_detail_status">
+ <fieldset class="cbi-section">
+ <legend><%:MWAN Detailed Status%></legend>
+ <div id="mwan_detail_text"><img src="<%=resource%>/icons/loading.gif" alt="<%:Loading%>" style="vertical-align:middle" /> Collecting data...</div>
+ </fieldset>
+</div>
+
+<style type="text/css">
+ .container { /* container for entire page. fixes bootstrap theme's ridiculously small page width */
+ max-width: none;
+ margin-left: 30px;
+ padding-right: 30px;
+ width: auto;
+ }
+ #mwan_detail_status {
+ border: 1px dotted #555555;
+ background-color: #FFFFFF;
+ padding: 20px;
+ }
+ #mwan_detail_text {
+ padding: 20px;
+ text-align: left;
+ }
+</style>
+
+<%+footer%>
--- /dev/null
+<%+header%>
+
+<ul class="cbi-tabmenu">
+ <li class="cbi-tab"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/overview")%>"><%:Interface Status%></a></li>
+ <li class="cbi-tab-disabled"><a href="<%=luci.dispatcher.build_url("admin/network/mwan/overview/overview_detailed")%>"><%:Detailed Status%></a></li>
+</ul>
+
+<script type="text/javascript" src="<%=resource%>/cbi.js"></script>
+<script type="text/javascript">//<![CDATA[
+ XHR.poll(5, '<%=luci.dispatcher.build_url("admin", "network", "mwan", "overview", "interface_status")%>', null,
+ function(x, mArray)
+ {
+ var statusDiv = document.getElementById('mwan_status_text');
+ if (mArray.wans)
+ {
+ var interfaceStatus = '';
+ for ( var i = 0; i < mArray.wans.length; i++ )
+ {
+ var status = '';
+ var css = '';
+ switch (mArray.wans[i].status)
+ {
+ case 'online':
+ status = 'Online (tracking active)';
+ css = 'wanon';
+ break;
+ case 'notMonitored':
+ status = 'Online (tracking off)';
+ css = 'wanon';
+ break;
+ case 'offline':
+ status = 'Offline';
+ css = 'wanoff';
+ break;
+ case 'notEnabled':
+ status = 'Disabled';
+ css = 'wanoff';
+ break;
+ }
+ interfaceStatus += String.format(
+ '<span class="%s"><strong>%s (<a href="%q">%s</a>)</strong><br />%s</span>',
+ css, mArray.wans[i].name, mArray.wans[i].link, mArray.wans[i].ifname, status
+ );
+ }
+ statusDiv.innerHTML = interfaceStatus;
+ }
+ else
+ {
+ statusDiv.innerHTML = '<strong>No MWAN interfaces found</strong>';
+ }
+
+ var logs = document.getElementById('mwan_statuslog_text');
+ if (mArray.mwanlog)
+ {
+ var mwanLog = 'Last 50 MWAN systemlog entries. Newest entries sorted at the top :';
+ logs.innerHTML = String.format('<pre>%s<br /><br />%s</pre>', mwanLog, mArray.mwanlog[0]);
+ }
+ else
+ {
+ logs.innerHTML = '<strong>No MWAN systemlog history found</strong>';
+ }
+ }
+ );
+//]]></script>
+
+<div id="mwan_interface_status">
+ <fieldset id="interface_field" class="cbi-section">
+ <legend><%:MWAN Interface Live Status%></legend>
+ <div id="mwan_status_text"><img src="<%=resource%>/icons/loading.gif" alt="<%:Loading%>" style="vertical-align:middle" /> Collecting data...</div>
+ </fieldset>
+ <fieldset class="cbi-section">
+ <legend><%:MWAN Interface Systemlog%></legend>
+ <div id="mwan_statuslog_text"><img src="<%=resource%>/icons/loading.gif" alt="<%:Loading%>" style="vertical-align:middle" /> Collecting data...</div>
+ </fieldset>
+</div>
+
+<style type="text/css">
+ .container { /* container for entire page. fixes bootstrap theme's ridiculously small page width */
+ max-width: none;
+ margin-left: 30px;
+ padding-right: 30px;
+ width: auto;
+ }
+ #mwan_interface_status {
+ background-color: #FFFFFF;
+ border: 1px dotted #555555;
+ padding: 20px;
+ }
+ #interface_field {
+ padding: 12px 20px 20px 20px;
+ }
+ #mwan_status_text {
+ display: table;
+ font-size: 14px;
+ margin: auto;
+ max-width: 1044px;
+ min-width: 246px;
+ width: 100%;
+ }
+ .wanon {
+ background-color: rgb(144, 240, 144);
+ }
+ .wanoff {
+ background-color: rgb(240, 144, 144);
+ }
+ .wanon, .wanoff {
+ border-radius: 60px;
+ box-shadow: 0px 2px 5px -3px;
+ float: left;
+ margin: 8px 3px 0px 3px;
+ min-height: 30px;
+ min-width: 235px;
+ padding: 5px 10px 8px 10px;
+ text-align: center;
+ }
+ #mwan_statuslog_text {
+ padding: 20px;
+ text-align: left;
+ }
+</style>
+
+<%+footer%>
--- /dev/null
+#!/bin/sh
+
+# to enable this script uncomment the case loop at the bottom
+# to report mwan status on interface hotplug ifup/ifdown events modify the lines in the send_alert function
+
+send_alert()
+{
+ # variable "$1" stores the MWAN status information
+ # insert your code here to send the contents of "$1"
+ echo "$1"
+}
+
+gather_event_info()
+{
+ # create event information message
+ local EVENT_INFO="Interface [ "$INTERFACE" ($DEVICE) ] on router [ "$(uci -p /var/state get system.@system[0].hostname)" ] has triggered a hotplug [ "$ACTION" ] event on "$(date +"%a %b %d %Y %T %Z")""
+
+ # get current interface, policy and rule status
+ local CURRENT_STATUS="$(/usr/sbin/mwan3 status)"
+
+ # get last 50 MWAN systemlog messages
+ local MWAN_LOG="$(echo -e "Last 50 MWAN systemlog entries. Newest entries sorted at the top:\n$(logread | grep mwan3 | tail -n 50 | sed 'x;1!H;$!d;x')")"
+
+ # pass event info to send_alert function
+ send_alert "$(echo -e "$EVENT_INFO\n\n$CURRENT_STATUS\n\n$MWAN_LOG")"
+}
+
+#case "$ACTION" in
+# ifup)
+# gather_event_info
+# ;;
+#
+# ifdown)
+# gather_event_info
+# ;;
+#esac
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+# replace existing mwan ucitrack entry
+uci -q batch <<-EOF >/dev/null
+ del ucitrack.@mwan3[-1]
+ add ucitrack mwan3
+ set ucitrack.@mwan3[-1].exec="/usr/sbin/mwan3 restart"
+ commit ucitrack
+EOF
+
+# remove LuCI cache
+rm -rf /tmp/luci-indexcache /tmp/luci-modulecache
+
+exit 0
local v4_port = uci:get("olsrd", "olsrd_jsoninfo", "port") or 9090
local v6_port = uci:get("olsrd6", "olsrd_jsoninfo", "port") or 9090
- jsonreq4 = utl.exec("(echo /status | nc 127.0.0.1 " .. v4_port .. ") 2>/dev/null" )
- jsonreq6 = utl.exec("(echo /status | nc ::1 " .. v6_port .. ") 2>/dev/null")
+ jsonreq4 = utl.exec("(echo /status | nc 127.0.0.1 " .. v4_port .. " | sed -n '/^[}{ ]/p') 2>/dev/null" )
+ jsonreq6 = utl.exec("(echo /status | nc ::1 " .. v6_port .. " | sed -n '/^[}{ ]/p') 2>/dev/null")
http.prepare_content("application/json")
if not jsonreq4 or jsonreq4 == "" then
jsonreq4 = "{}"
local v4_port = uci:get("olsrd", "olsrd_jsoninfo", "port") or 9090
local v6_port = uci:get("olsrd6", "olsrd_jsoninfo", "port") or 9090
- jsonreq4 = utl.exec("(echo /" .. otable .. " | nc 127.0.0.1 " .. v4_port .. ") 2>/dev/null")
- jsonreq6 = utl.exec("(echo /" .. otable .. " | nc ::1 " .. v6_port .. ") 2>/dev/null")
+ jsonreq4 = utl.exec("(echo /" .. otable .. " | nc 127.0.0.1 " .. v4_port .. " | sed -n '/^[}{ ]/p') 2>/dev/null")
+ jsonreq6 = utl.exec("(echo /" .. otable .. " | nc ::1 " .. v6_port .. " | sed -n '/^[}{ ]/p') 2>/dev/null")
local jsondata4 = {}
local jsondata6 = {}
local data4 = {}
if luci.http.formvalue("status") == "1" then
local rv = {}
for k, link in ipairs(links) do
- link.linkCost = tonumber(link.linkCost)/1024 or 0
- if link.linkCost == 4096 then
+ link.linkCost = tonumber(link.linkCost) or 0
+ if link.linkCost == 4194304 then
link.linkCost = 0
end
local color = olsrtools.etx_color(link.linkCost)
<tbody id="olsr_neigh_table">
<% local i = 1
for k, link in ipairs(links) do
- link.linkCost = tonumber(link.linkCost)/1024 or 0
- if link.linkCost == 4096 then
+ link.linkCost = tonumber(link.linkCost) or 0
+ if link.linkCost == 4194304 then
link.linkCost = 0
end
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2014-06-21 19:36+0200\n"
-"Last-Translator: Éder <eder.grigorio@openmailbox.org>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
+"PO-Revision-Date: 2017-02-20 18:01-0300\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
"Language: pt_BR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
+"Language-Team: \n"
msgid "Active MID announcements"
msgstr ""
"Somente pode ser um endereço IPv4 ou IPv6 válidos ou um endereço 'padrão'"
# 20140621: edersg: tradução
-#, fuzzy
msgid "Can only be a valid IPv6 address or 'default'"
msgstr ""
"Somente pode ser um endereço IPv4 ou IPv6 válidos ou um endereço 'padrão'"
"Validade do <abbr title=\"Host and network association, Associação de "
"equipamentos e redes\">HNA</abbr>"
-#, fuzzy
msgid "HNA6 Announcements"
msgstr ""
"Anúncios do <abbr title=\"Host and network association, Associação de "
"Equipamentos em uma rede roteada por OLSR podem anunciar conectividade para "
"redes externas usando mensagens HNA."
-#, fuzzy
msgid ""
"Hosts in a OLSR routed network can announce connecitivity to external "
"networks using HNA6 messages."
"> reduzir LQ para todos os nós nesta interface em 20%: padrão 0.8"
# 20140621: edersg: tradução
-#, fuzzy
msgid ""
"Multiply routes with the factor given here. Allowed values are between 0.01 "
"and 1.0. It is only used when LQ-Level is greater than 0. Examples:<br /"
"OLSR - Anúncios <abbr title=\"Host and network association, Associação de "
"equipamentos e redes\">HNA</abbr>"
-#, fuzzy
msgid "OLSR - HNA6-Announcements"
msgstr ""
"OLSR - Anúncios <abbr title=\"Host and network association, Associação de "
"durante o funcionamento do olsrd. O padrão é 0.0.0.0, que faz com que o "
"endereço da primeira interface seja usado."
-#, fuzzy
msgid ""
"Sets the main IP (originator ip) of the router. This IP will NEVER change "
"during the uptime of olsrd. Default is ::, which triggers usage of the IP of "
"and network association, Associação de equipamentos e redes\">HNA</abbr> "
"local de 0.0.0.0/0, ::ffff:0:0/96 ou 2000::/3. O padrão é \"ambos\"."
-#, fuzzy
msgid ""
"Which kind of uplink is exported to the other mesh nodes. An uplink is "
"detected by looking for a local HNA6 ::ffff:0:0/96 or 2000::/3. Default "
local knownParams = {
--
- -- Widget Name Default(s) Description Option(s)
- --
+ --Widget
+ -- Name
+ -- Default(s)
+ -- Description
+ -- Option(s)
{ "Service", {
- -- initialisation and daemon options
- { ListValue, "verb", { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }, translate("Set output verbosity") },
- { Flag, "mlock", 0, translate("Disable Paging") },
- { Flag, "disable_occ", 0, translate("Disable options consistency check") },
- -- { Value, "user", "root", translate("Set UID to user") },
- -- { Value, "group", "root", translate("Set GID to group") },
- { Value, "cd", "/etc/openvpn", translate("Change to directory before initialization") },
- { Value, "chroot", "/var/run", translate("Chroot to directory after initialization") },
- -- { Value, "daemon", "Instance-Name", translate("Daemonize after initialization") },
- -- { Value, "syslog", "Instance-Name", translate("Output to syslog and do not daemonize") },
- { Flag, "passtos", 0, translate("TOS passthrough (applies to IPv4 only)") },
- -- { Value, "inetd", "nowait Instance-Name", translate("Run as an inetd or xinetd server") },
- { Value, "log", "/var/log/openvpn.log", translate("Write log to file") },
- { Value, "log_append", "/var/log/openvpn.log", translate("Append log to file") },
- { Flag, "suppress_timestamps", 0, translate("Don't log timestamps") },
- -- { Value, "writepid", "/var/run/openvpn.pid", translate("Write process ID to file") },
- { Value, "nice", 0, translate("Change process priority") },
- { Flag, "fast_io", 0, translate("Optimize TUN/TAP/UDP writes") },
- { Value, "echo", "some params echoed to log", translate("Echo parameters to log") },
- { ListValue, "remap_usr1", { "SIGHUP", "SIGTERM" }, translate("Remap SIGUSR1 signals") },
- { Value, "status", "/var/run/openvpn.status 5", translate("Write status to file every n seconds") },
- { Value, "status_version", { 1, 2 }, translate("Status file format version") }, -- status
- { Value, "mute", 5, translate("Limit repeated log messages") },
-
- { Value, "up", "/usr/bin/ovpn-up", translate("Shell cmd to execute after tun device open") },
- { Value, "up_delay", 5, translate("Delay tun/tap open and up script execution") },
- { Value, "down", "/usr/bin/ovpn-down", translate("Shell cmd to run after tun device close") },
- { Flag, "down_pre", 0, translate("Call down cmd/script before TUN/TAP close") },
- { Flag, "up_restart", 0, translate("Run up/down scripts for all restarts") },
- { Value, "route_up", "/usr/bin/ovpn-routeup", translate("Execute shell cmd after routes are added") },
- { Value, "ipchange", "/usr/bin/ovpn-ipchange", translate("Execute shell command on remote ip change"), { mode="p2p" } },
- { DynamicList, "setenv", { "VAR1 value1", "VAR2 value2" }, translate("Pass environment variables to script") },
- { Value, "tls_verify", "/usr/bin/ovpn-tlsverify", translate("Shell command to verify X509 name") },
- { Value, "client_connect", "/usr/bin/ovpn-clientconnect", translate("Run script cmd on client connection") },
- { Flag, "client_disconnect", 0, translate("Run script cmd on client disconnection") },
- { Value, "learn_address", "/usr/bin/ovpn-learnaddress", translate("Executed in server mode whenever an IPv4 address/route or MAC address is added to OpenVPN's internal routing table") },
- { Value, "auth_user_pass_verify", "/usr/bin/ovpn-userpass via-env", translate("Executed in server mode on new client connections, when the client is still untrusted") },
- { ListValue, "script_security", { 0, 1, 2, 3 }, translate("Policy level over usage of external programs and scripts") },
+ -- initialisation and daemon options
+ { ListValue,
+ "verb",
+ { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 },
+ translate("Set output verbosity") },
+ { Flag,
+ "mlock",
+ 0,
+ translate("Disable Paging") },
+ { Flag,
+ "disable_occ",
+ 0,
+ translate("Disable options consistency check") },
+ -- { Value,
+ -- "user",
+ -- "root",
+ -- translate("Set UID to user") },
+ -- { Value,
+ -- "group",
+ -- "root",
+ -- translate("Set GID to group") },
+ { Value,
+ "cd",
+ "/etc/openvpn",
+ translate("Change to directory before initialization") },
+ { Value,
+ "chroot",
+ "/var/run",
+ translate("Chroot to directory after initialization") },
+ -- { Value,
+ -- "daemon",
+ -- "Instance-Name",
+ -- translate("Daemonize after initialization") },
+ -- { Value,
+ -- "syslog",
+ -- "Instance-Name",
+ -- translate("Output to syslog and do not daemonize") },
+ { Flag,
+ "passtos",
+ 0,
+ translate("TOS passthrough (applies to IPv4 only)") },
+ -- { Value,
+ -- "inetd",
+ -- "nowait Instance-Name",
+ -- translate("Run as an inetd or xinetd server") },
+ { Value,
+ "log",
+ "/var/log/openvpn.log",
+ translate("Write log to file") },
+ { Value,
+ "log_append",
+ "/var/log/openvpn.log",
+ translate("Append log to file") },
+ { Flag,
+ "suppress_timestamps",
+ 0,
+ translate("Don't log timestamps") },
+ -- { Value,
+ -- "writepid",
+ -- "/var/run/openvpn.pid",
+ -- translate("Write process ID to file") },
+ { Value,
+ "nice",
+ 0,
+ translate("Change process priority") },
+ { Flag,
+ "fast_io",
+ 0,
+ translate("Optimize TUN/TAP/UDP writes") },
+ { Value,
+ "echo",
+ "some params echoed to log",
+ translate("Echo parameters to log") },
+ { ListValue,
+ "remap_usr1",
+ { "SIGHUP", "SIGTERM" },
+ translate("Remap SIGUSR1 signals") },
+ { Value,
+ "status",
+ "/var/run/openvpn.status 5",
+ translate("Write status to file every n seconds") },
+ { Value,
+ "status_version",
+ { 1, 2 },
+ translate("Status file format version") }, -- status
+ { Value,
+ "mute",
+ 5,
+ translate("Limit repeated log messages") },
+ { Value,
+ "up",
+ "/usr/bin/ovpn-up",
+ translate("Shell cmd to execute after tun device open") },
+ { Value,
+ "up_delay",
+ 5,
+ translate("Delay tun/tap open and up script execution") },
+ { Value,
+ "down",
+ "/usr/bin/ovpn-down",
+ translate("Shell cmd to run after tun device close") },
+ { Flag,
+ "down_pre",
+ 0,
+ translate("Call down cmd/script before TUN/TAP close") },
+ { Flag,
+ "up_restart",
+ 0,
+ translate("Run up/down scripts for all restarts") },
+ { Value,
+ "route_up",
+ "/usr/bin/ovpn-routeup",
+ translate("Execute shell cmd after routes are added") },
+ { Value,
+ "ipchange",
+ "/usr/bin/ovpn-ipchange",
+ translate("Execute shell command on remote ip change"),
+ { mode="p2p" } },
+ { DynamicList,
+ "setenv",
+ { "VAR1 value1", "VAR2 value2" },
+ translate("Pass environment variables to script") },
+ { Value,
+ "tls_verify",
+ "/usr/bin/ovpn-tlsverify",
+ translate("Shell command to verify X509 name") },
+ { Value,
+ "client_connect",
+ "/usr/bin/ovpn-clientconnect",
+ translate("Run script cmd on client connection") },
+ { Flag,
+ "client_disconnect",
+ 0,
+ translate("Run script cmd on client disconnection") },
+ { Value,
+ "learn_address",
+ "/usr/bin/ovpn-learnaddress",
+ translate("Executed in server mode whenever an IPv4 address/route or MAC address is added to OpenVPN's internal routing table") },
+ { Value,
+ "auth_user_pass_verify",
+ "/usr/bin/ovpn-userpass via-env",
+ translate("Executed in server mode on new client connections, when the client is still untrusted") },
+ { ListValue,
+ "script_security",
+ { 0, 1, 2, 3 },
+ translate("Policy level over usage of external programs and scripts") },
} },
{ "Networking", {
- -- socket config
- { ListValue, "mode", { "p2p", "server" }, translate("Major mode") },
- { Value, "local", "0.0.0.0", translate("Local host name or ip address") },
- { Value, "port", 1194, translate("TCP/UDP port # for both local and remote") },
- { Value, "lport", 1194, translate("TCP/UDP port # for local (default=1194)") },
- { Value, "rport", 1194, translate("TCP/UDP port # for remote (default=1194)") },
- { Flag, "float", 0, translate("Allow remote to change its IP or port") },
- { Flag, "nobind", 0, translate("Do not bind to local address and port") },
-
- { Value, "dev", "tun0", translate("tun/tap device") },
- { ListValue, "dev_type", { "tun", "tap" }, translate("Type of used device") },
- { Value, "dev_node", "/dev/net/tun", translate("Use tun/tap device node") },
- { Flag, "tun_ipv6", 0, translate("Make tun device IPv6 capable") },
-
- { Value, "ifconfig", "10.200.200.3 10.200.200.1", translate("Set tun/tap adapter parameters") },
- { Flag, "ifconfig_noexec", 0, translate("Don't actually execute ifconfig") },
- { Flag, "ifconfig_nowarn", 0, translate("Don't warn on ifconfig inconsistencies") },
-
- { DynamicList, "route", "10.123.0.0 255.255.0.0", translate("Add route after establishing connection") },
- { Value, "route_gateway", "10.234.1.1", translate("Specify a default gateway for routes") },
- { Value, "route_delay", 0, translate("Delay n seconds after connection") },
- { Flag, "route_noexec", 0, translate("Don't add routes automatically") },
- { Flag, "route_nopull", 0, translate("Don't pull routes automatically") },
-
- { ListValue, "mtu_disc", { "yes", "maybe", "no" }, translate("Enable Path MTU discovery") },
- { Flag, "mtu_test", 0, translate("Empirically measure MTU") },
- { ListValue, "comp_lzo", { "yes", "no", "adaptive" }, translate("Use fast LZO compression") },
- { Flag, "comp_noadapt", 0, translate("Don't use adaptive lzo compression"), { comp_lzo=1 } },
- { Value, "link_mtu", 1500, translate("Set TCP/UDP MTU") },
- { Value, "tun_mtu", 1500, translate("Set tun/tap device MTU") },
- { Value, "tun_mtu_extra", 1500, translate("Set tun/tap device overhead") },
- { Value, "fragment", 1500, translate("Enable internal datagram fragmentation"), { proto="udp" } },
- { Value, "mssfix", 1500, translate("Set upper bound on TCP MSS"), { proto="udp" } },
- { Value, "sndbuf", 65536, translate("Set the TCP/UDP send buffer size") },
- { Value, "rcvbuf", 65536, translate("Set the TCP/UDP receive buffer size") },
- { Value, "txqueuelen", 100, translate("Set tun/tap TX queue length") },
- { Value, "shaper", 10240, translate("Shaping for peer bandwidth") },
-
- { Value, "inactive", 240, translate("tun/tap inactivity timeout") },
- { Value, "keepalive", "10 60", translate("Helper directive to simplify the expression of --ping and --ping-restart in server mode configurations") },
- { Value, "ping", 30, translate("Ping remote every n seconds over TCP/UDP port") },
- { Value, "ping_exit", 120, translate("Remote ping timeout") },
- { Value, "ping_restart", 60, translate("Restart after remote ping timeout") },
- { Flag, "ping_timer_rem", 0, translate("Only process ping timeouts if routes exist") },
-
- { Flag, "persist_tun", 0, translate("Keep tun/tap device open on restart") },
- { Flag, "persist_key", 0, translate("Don't re-read key on restart") },
- { Flag, "persist_local_ip", 0, translate("Keep local IP address on restart") },
- { Flag, "persist_remote_ip", 0, translate("Keep remote IP address on restart") },
-
- -- management channel
- { Value, "management", "127.0.0.1 31194 /etc/openvpn/mngmt-pwds", translate("Enable management interface on <em>IP</em> <em>port</em>") },
- { Flag, "management_query_passwords", 0, translate("Query management channel for private key") }, -- management
- { Flag, "management_hold", 0, translate("Start OpenVPN in a hibernating state") }, -- management
- { Value, "management_log_cache", 100, translate("Number of lines for log file history") }, -- management
- { ListValue, "topology", { "net30", "p2p", "subnet" }, translate("'net30', 'p2p', or 'subnet'"), {dev_type="tun" } },
+ -- socket config
+ { ListValue,
+ "mode",
+ { "p2p", "server" },
+ translate("Major mode") },
+ { Value,
+ "local",
+ "0.0.0.0",
+ translate("Local host name or ip address") },
+ { Value,
+ "port",
+ 1194,
+ translate("TCP/UDP port # for both local and remote") },
+ { Value,
+ "lport",
+ 1194,
+ translate("TCP/UDP port # for local (default=1194)") },
+ { Value,
+ "rport",
+ 1194,
+ translate("TCP/UDP port # for remote (default=1194)") },
+ { Flag,
+ "float",
+ 0,
+ translate("Allow remote to change its IP or port") },
+ { Flag,
+ "nobind",
+ 0,
+ translate("Do not bind to local address and port") },
+ { Value,
+ "dev",
+ "tun0",
+ translate("tun/tap device") },
+ { ListValue,
+ "dev_type",
+ { "tun", "tap" },
+ translate("Type of used device") },
+ { Value,
+ "dev_node",
+ "/dev/net/tun",
+ translate("Use tun/tap device node") },
+ { Flag,
+ "tun_ipv6",
+ 0,
+ translate("Make tun device IPv6 capable") },
+ { Value,
+ "ifconfig",
+ "10.200.200.3 10.200.200.1",
+ translate("Set tun/tap adapter parameters") },
+ { Flag,
+ "ifconfig_noexec",
+ 0,
+ translate("Don't actually execute ifconfig") },
+ { Flag,
+ "ifconfig_nowarn",
+ 0,
+ translate("Don't warn on ifconfig inconsistencies") },
+ { DynamicList,
+ "route",
+ "10.123.0.0 255.255.0.0",
+ translate("Add route after establishing connection") },
+ { Value,
+ "route_gateway",
+ "10.234.1.1",
+ translate("Specify a default gateway for routes") },
+ { Value,
+ "route_delay",
+ 0,
+ translate("Delay n seconds after connection") },
+ { Flag,
+ "route_noexec",
+ 0,
+ translate("Don't add routes automatically") },
+ { Flag,
+ "route_nopull",
+ 0,
+ translate("Don't pull routes automatically") },
+ { ListValue,
+ "mtu_disc",
+ { "yes", "maybe", "no" },
+ translate("Enable Path MTU discovery") },
+ { Flag,
+ "mtu_test",
+ 0,
+ translate("Empirically measure MTU") },
+ { ListValue,
+ "comp_lzo",
+ { "yes", "no", "adaptive" },
+ translate("Use fast LZO compression") },
+ { Flag,
+ "comp_noadapt",
+ 0,
+ translate("Don't use adaptive lzo compression"),
+ { comp_lzo=1 } },
+ { Value,
+ "link_mtu",
+ 1500,
+ translate("Set TCP/UDP MTU") },
+ { Value,
+ "tun_mtu",
+ 1500,
+ translate("Set tun/tap device MTU") },
+ { Value,
+ "tun_mtu_extra",
+ 1500,
+ translate("Set tun/tap device overhead") },
+ { Value,
+ "fragment",
+ 1500,
+ translate("Enable internal datagram fragmentation"),
+ { proto="udp" } },
+ { Value,
+ "mssfix",
+ 1500,
+ translate("Set upper bound on TCP MSS"),
+ { proto="udp" } },
+ { Value,
+ "sndbuf",
+ 65536,
+ translate("Set the TCP/UDP send buffer size") },
+ { Value,
+ "rcvbuf",
+ 65536,
+ translate("Set the TCP/UDP receive buffer size") },
+ { Value,
+ "txqueuelen",
+ 100,
+ translate("Set tun/tap TX queue length") },
+ { Value,
+ "shaper",
+ 10240,
+ translate("Shaping for peer bandwidth") },
+ { Value,
+ "inactive",
+ 240,
+ translate("tun/tap inactivity timeout") },
+ { Value,
+ "keepalive",
+ "10 60",
+ translate("Helper directive to simplify the expression of --ping and --ping-restart in server mode configurations") },
+ { Value,
+ "ping",
+ 30,
+ translate("Ping remote every n seconds over TCP/UDP port") },
+ { Value,
+ "ping_exit",
+ 120,
+ translate("Remote ping timeout") },
+ { Value,
+ "ping_restart",
+ 60,
+ translate("Restart after remote ping timeout") },
+ { Flag,
+ "ping_timer_rem",
+ 0,
+ translate("Only process ping timeouts if routes exist") },
+ { Flag,
+ "persist_tun",
+ 0,
+ translate("Keep tun/tap device open on restart") },
+ { Flag,
+ "persist_key",
+ 0,
+ translate("Don't re-read key on restart") },
+ { Flag,
+ "persist_local_ip",
+ 0,
+ translate("Keep local IP address on restart") },
+ { Flag,
+ "persist_remote_ip",
+ 0,
+ translate("Keep remote IP address on restart") },
+ -- management channel
+ { Value,
+ "management",
+ "127.0.0.1 31194 /etc/openvpn/mngmt-pwds",
+ translate("Enable management interface on <em>IP</em> <em>port</em>") },
+ -- management
+ { Flag,
+ "management_query_passwords",
+ 0,
+ translate("Query management channel for private key") },
+ -- management
+ { Flag,
+ "management_hold",
+ 0,
+ translate("Start OpenVPN in a hibernating state") },
+ -- management
+ { Value,
+ "management_log_cache",
+ 100,
+ translate("Number of lines for log file history") },
+ { ListValue,
+ "topology",
+ { "net30", "p2p", "subnet" },
+ translate("'net30', 'p2p', or 'subnet'"),
+ {dev_type="tun" } },
} },
{ "VPN", {
- { Value, "server", "10.200.200.0 255.255.255.0", translate("Configure server mode"), { server_mode="1" } },
- { Value, "server_bridge", "10.200.200.1 255.255.255.0 10.200.200.200 10.200.200.250", translate("Configure server bridge"), { server_mode="1" } },
- { DynamicList, "push", { "redirect-gateway", "comp-lzo" }, translate("Push options to peer"), { server_mode="1" } },
- { Flag, "push_reset", 0, translate("Don't inherit global push options"), { server_mode="1" } },
- { Flag, "disable", 0, translate("Client is disabled"), { server_mode="1" } },
- { Value, "ifconfig_pool", "10.200.200.100 10.200.200.150 255.255.255.0", translate("Set aside a pool of subnets"), { server_mode="1" } },
- { Value, "ifconfig_pool_persist", "/etc/openvpn/ipp.txt 600", translate("Persist/unpersist ifconfig-pool"), { server_mode="1" } },
--- { Flag, "ifconfig_pool_linear", 0, translate("Use individual addresses rather than /30 subnets"), { server_mode="1" } }, -- deprecated and replaced by --topology p2p
- { Value, "ifconfig_push", "10.200.200.1 255.255.255.255", translate("Push an ifconfig option to remote"), { server_mode="1" } },
- { Value, "iroute", "10.200.200.0 255.255.255.0", translate("Route subnet to client"), { server_mode="1" } },
- { Flag, "client_to_client", 0, translate("Allow client-to-client traffic"), { server_mode="1" } },
- { Flag, "duplicate_cn", 0, translate("Allow multiple clients with same certificate"), { server_mode="1" } },
- { Value, "client_config_dir", "/etc/openvpn/ccd", translate("Directory for custom client config files"), { server_mode="1" } },
- { Flag, "ccd_exclusive", 0, translate("Refuse connection if no custom client config"), { server_mode="1" } },
- { Value, "tmp_dir", "/var/run/openvpn", translate("Temporary directory for client-connect return file"), { server_mode="1" } },
- { Value, "hash_size", "256 256", translate("Set size of real and virtual address hash tables"), { server_mode="1" } },
- { Value, "bcast_buffers", 256, translate("Number of allocated broadcast buffers"), { server_mode="1" } },
- { Value, "tcp_queue_limit", 64, translate("Maximum number of queued TCP output packets"), { server_mode="1" } },
- { Value, "max_clients", 10, translate("Allowed maximum of connected clients"), { server_mode="1" } },
- { Value, "max_routes_per_client", 256, translate("Allowed maximum of internal"), { server_mode="1" } },
- { Value, "connect_freq", "3 10", translate("Allowed maximum of new connections"), { server_mode="1" } },
- { Flag, "client_cert_not_required", 0, translate("Don't require client certificate"), { server_mode="1" } },
- { Flag, "username_as_common_name", 0, translate("Use username as common name"), { server_mode="1" } },
- { Flag, "client", 0, translate("Configure client mode"), { server_mode="0" }, { server_mode="" } },
- { Flag, "pull", 0, translate("Accept options pushed from server"), { client="1" } },
- { Value, "auth_user_pass", "/etc/openvpn/userpass.txt", translate("Authenticate using username/password"), { client="1" } },
- { ListValue, "auth_retry", { "none", "nointeract", "interact" }, translate("Handling of authentication failures"), { client="1" } },
- { Value, "explicit_exit_notify", 1, translate("Send notification to peer on disconnect"), { client="1" } },
- { DynamicList, "remote", "1.2.3.4", translate("Remote host name or ip address"), { client="1" } },
- { Flag, "remote_random", 1, translate("Randomly choose remote server"), { client="1" } },
- { ListValue, "proto", { "udp", "tcp-client", "tcp-server" }, translate("Use protocol"), { client="1" } },
- { Value, "connect_retry", 5, translate("Connection retry interval"), { proto="tcp-client" }, { client="1" } },
- { Value, "http_proxy", "192.168.1.100 8080", translate("Connect to remote host through an HTTP proxy"), { client="1" } },
- { Flag, "http_proxy_retry", 0, translate("Retry indefinitely on HTTP proxy errors"), { client="1" } },
- { Value, "http_proxy_timeout", 5, translate("Proxy timeout in seconds"), { client="1" } },
- { DynamicList, "http_proxy_option", { "VERSION 1.0", "AGENT OpenVPN/2.0.9" }, translate("Set extended HTTP proxy options"), { client="1" } },
- { Value, "socks_proxy", "192.168.1.200 1080", translate("Connect through Socks5 proxy"), { client="1" } },
- { Value, "socks_proxy_retry", 5, translate("Retry indefinitely on Socks proxy errors"), { client="1" } }, -- client && socks_proxy
- { Value, "resolv_retry", "infinite", translate("If hostname resolve fails, retry"), { client="1" } },
- { ListValue, "redirect_gateway", { "", "local", "def1", "local def1" }, translate("Automatically redirect default route"), { client="1" } },
+ { Value,
+ "server",
+ "10.200.200.0 255.255.255.0",
+ translate("Configure server mode"),
+ { server_mode="1" } },
+ { Value,
+ "server_bridge",
+ "10.200.200.1 255.255.255.0 10.200.200.200 10.200.200.250",
+ translate("Configure server bridge"),
+ { server_mode="1" } },
+ { DynamicList,
+ "push",
+ { "redirect-gateway", "comp-lzo" },
+ translate("Push options to peer"),
+ { server_mode="1" } },
+ { Flag,
+ "push_reset",
+ 0,
+ translate("Don't inherit global push options"),
+ { server_mode="1" } },
+ { Flag,
+ "disable",
+ 0,
+ translate("Client is disabled"),
+ { server_mode="1" } },
+ { Value,
+ "ifconfig_pool",
+ "10.200.200.100 10.200.200.150 255.255.255.0",
+ translate("Set aside a pool of subnets"),
+ { server_mode="1" } },
+ { Value,
+ "ifconfig_pool_persist",
+ "/etc/openvpn/ipp.txt 600",
+ translate("Persist/unpersist ifconfig-pool"),
+ { server_mode="1" } },
+ -- deprecated and replaced by --topology p2p
+ -- { Flag,
+ -- "ifconfig_pool_linear",
+ -- 0,
+ -- translate("Use individual addresses rather than /30 subnets"),
+ -- { server_mode="1" } },
+ { Value,
+ "ifconfig_push",
+ "10.200.200.1 255.255.255.255",
+ translate("Push an ifconfig option to remote"),
+ { server_mode="1" } },
+ { Value,
+ "iroute",
+ "10.200.200.0 255.255.255.0",
+ translate("Route subnet to client"),
+ { server_mode="1" } },
+ { Flag,
+ "client_to_client",
+ 0,
+ translate("Allow client-to-client traffic"),
+ { server_mode="1" } },
+ { Flag,
+ "duplicate_cn",
+ 0,
+ translate("Allow multiple clients with same certificate"),
+ { server_mode="1" } },
+ { Value,
+ "client_config_dir",
+ "/etc/openvpn/ccd",
+ translate("Directory for custom client config files"),
+ { server_mode="1" } },
+ { Flag,
+ "ccd_exclusive",
+ 0,
+ translate("Refuse connection if no custom client config"),
+ { server_mode="1" } },
+ { Value,
+ "tmp_dir",
+ "/var/run/openvpn",
+ translate("Temporary directory for client-connect return file"),
+ { server_mode="1" } },
+ { Value,
+ "hash_size",
+ "256 256",
+ translate("Set size of real and virtual address hash tables"),
+ { server_mode="1" } },
+ { Value,
+ "bcast_buffers",
+ 256,
+ translate("Number of allocated broadcast buffers"),
+ { server_mode="1" } },
+ { Value,
+ "tcp_queue_limit",
+ 64,
+ translate("Maximum number of queued TCP output packets"),
+ { server_mode="1" } },
+ { Value,
+ "max_clients",
+ 10,
+ translate("Allowed maximum of connected clients"),
+ { server_mode="1" } },
+ { Value,
+ "max_routes_per_client",
+ 256,
+ translate("Allowed maximum of internal"),
+ { server_mode="1" } },
+ { Value,
+ "connect_freq",
+ "3 10",
+ translate("Allowed maximum of new connections"),
+ { server_mode="1" } },
+ { Flag,
+ "client_cert_not_required",
+ 0,
+ translate("Don't require client certificate"),
+ { server_mode="1" } },
+ { Flag,
+ "username_as_common_name",
+ 0,
+ translate("Use username as common name"),
+ { server_mode="1" } },
+ { Flag,
+ "client",
+ 0,
+ translate("Configure client mode"),
+ { server_mode="0" }, { server_mode="" } },
+ { Flag,
+ "pull",
+ 0,
+ translate("Accept options pushed from server"),
+ { client="1" } },
+ { Value,
+ "auth_user_pass",
+ "/etc/openvpn/userpass.txt",
+ translate("Authenticate using username/password"),
+ { client="1" } },
+ { ListValue,
+ "auth_retry",
+ { "none", "nointeract", "interact" },
+ translate("Handling of authentication failures"),
+ { client="1" } },
+ { Value,
+ "explicit_exit_notify",
+ 1,
+ translate("Send notification to peer on disconnect"),
+ { client="1" } },
+ { DynamicList,
+ "remote",
+ "1.2.3.4",
+ translate("Remote host name or ip address"),
+ { client="1" } },
+ { Flag,
+ "remote_random",
+ 1,
+ translate("Randomly choose remote server"),
+ { client="1" } },
+ { ListValue,
+ "proto",
+ { "udp", "tcp-client", "tcp-server" },
+ translate("Use protocol"),
+ { client="1" } },
+ { Value,
+ "connect_retry",
+ 5,
+ translate("Connection retry interval"),
+ { proto="tcp-client" }, { client="1" } },
+ { Value,
+ "http_proxy",
+ "192.168.1.100 8080",
+ translate("Connect to remote host through an HTTP proxy"),
+ { client="1" } },
+ { Flag,
+ "http_proxy_retry",
+ 0,
+ translate("Retry indefinitely on HTTP proxy errors"),
+ { client="1" } },
+ { Value,
+ "http_proxy_timeout",
+ 5,
+ translate("Proxy timeout in seconds"),
+ { client="1" } },
+ { DynamicList,
+ "http_proxy_option",
+ { "VERSION 1.0", "AGENT OpenVPN/2.0.9" },
+ translate("Set extended HTTP proxy options"),
+ { client="1" } },
+ { Value,
+ "socks_proxy",
+ "192.168.1.200 1080",
+ translate("Connect through Socks5 proxy"),
+ { client="1" } },
+ -- client && socks_proxy
+ { Value,
+ "socks_proxy_retry",
+ 5,
+ translate("Retry indefinitely on Socks proxy errors"),
+ { client="1" } },
+ { Value,
+ "resolv_retry",
+ "infinite",
+ translate("If hostname resolve fails, retry"),
+ { client="1" } },
+ { ListValue,
+ "redirect_gateway",
+ { "", "local", "def1", "local def1" },
+ translate("Automatically redirect default route"),
+ { client="1" } },
} },
{ "Cryptography", {
- { FileUpload, "secret", "/etc/openvpn/secret.key", translate("Enable Static Key encryption mode (non-TLS)") },
- { Value, "auth", "SHA1", translate("HMAC authentication for packets") }, -- parse
- { Value, "cipher", "BF-CBC", translate("Encryption cipher for packets") }, -- parse
- { Value, "keysize", 1024, translate("Size of cipher key") }, -- parse
- { Value, "engine", "dynamic", translate("Enable OpenSSL hardware crypto engines") }, -- parse
- { Flag, "no_replay", 0, translate("Disable replay protection") },
- { Value, "replay_window", "64 15", translate("Replay protection sliding window size") },
- { Flag, "mute_replay_warnings", 0, translate("Silence the output of replay warnings") },
- { Value, "replay_persist", "/var/run/openvpn-replay-state", translate("Persist replay-protection state") },
- { Flag, "no_iv", 0, translate("Disable cipher initialisation vector") },
- { Flag, "tls_server", 0, translate("Enable TLS and assume server role"), { tls_client="" }, { tls_client="0" } },
- { Flag, "tls_client", 0, translate("Enable TLS and assume client role"), { tls_server="" }, { tls_server="0" } },
- { FileUpload, "ca", "/etc/easy-rsa/keys/ca.crt", translate("Certificate authority") },
- { FileUpload, "dh", "/etc/easy-rsa/keys/dh1024.pem", translate("Diffie Hellman parameters") },
- { FileUpload, "cert", "/etc/easy-rsa/keys/some-client.crt", translate("Local certificate") },
- { FileUpload, "key", "/etc/easy-rsa/keys/some-client.key", translate("Local private key") },
- { FileUpload, "pkcs12", "/etc/easy-rsa/keys/some-client.pk12", translate("PKCS#12 file containing keys") },
- { ListValue, "key_method", { 1, 2 }, translate("Enable TLS and assume client role") },
- { Value, "tls_cipher", "DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:DES-CBC3-SHA:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:AES128-SHA:RC4-SHA:RC4-MD5:EDH-RSA-DES-CBC-SHA:EDH-DSS-DES-CBC-SHA:DES-CBC-SHA:EXP-EDH-RSA-DES-CBC-SHA:EXP-EDH-DSS-DES-CBC-SHA:EXP-DES-CBC-SHA:EXP-RC2-CBC-MD5:EXP-RC4-MD5",
- translate("TLS cipher") },
- { Value, "tls_timeout", 2, translate("Retransmit timeout on TLS control channel") },
- { Value, "reneg_bytes", 1024, translate("Renegotiate data chan. key after bytes") },
- { Value, "reneg_pkts", 100, translate("Renegotiate data chan. key after packets") },
- { Value, "reneg_sec", 3600, translate("Renegotiate data chan. key after seconds") },
- { Value, "hand_window", 60, translate("Timeframe for key exchange") },
- { Value, "tran_window", 3600, translate("Key transition window") },
- { Flag, "single_session", 0, translate("Allow only one session") },
- { Flag, "tls_exit", 0, translate("Exit on TLS negotiation failure") },
- { Value, "tls_auth", "/etc/openvpn/tlsauth.key", translate("Additional authentication over TLS") },
- --{ Value, "askpass", "[file]", translate("Get PEM password from controlling tty before we daemonize") },
- { Flag, "auth_nocache", 0, translate("Don't cache --askpass or --auth-user-pass passwords") },
- { Value, "tls_remote", "remote_x509_name", translate("Only accept connections from given X509 name") },
- { ListValue, "ns_cert_type", { "client", "server" }, translate("Require explicit designation on certificate") },
- { ListValue, "remote_cert_tls", { "client", "server" }, translate("Require explicit key usage on certificate") },
- { Value, "crl_verify", "/etc/easy-rsa/keys/crl.pem", translate("Check peer certificate against a CRL") },
- { Value, "tls_version_min", "1.0", translate("The lowest supported TLS version") },
- { Value, "tls_version_max", "1.2", translate("The highest supported TLS version") },
- { Value, "key_direction", "1", translate("The key direction for 'tls-auth' and 'secret' options") },
- } }
+ { FileUpload,
+ "secret",
+ "/etc/openvpn/secret.key",
+ translate("Enable Static Key encryption mode (non-TLS)") },
+ -- parse
+ { Value,
+ "auth",
+ "SHA1",
+ translate("HMAC authentication for packets") },
+ -- parse
+ { Value,
+ "cipher",
+ "BF-CBC",
+ translate("Encryption cipher for packets") },
+ -- parse
+ { Value,
+ "keysize",
+ 1024,
+ translate("Size of cipher key") },
+ -- parse
+ { Value,
+ "engine",
+ "dynamic",
+ translate("Enable OpenSSL hardware crypto engines") },
+ { Flag,
+ "no_replay",
+ 0,
+ translate("Disable replay protection") },
+ { Value,
+ "replay_window",
+ "64 15",
+ translate("Replay protection sliding window size") },
+ { Flag,
+ "mute_replay_warnings",
+ 0,
+ translate("Silence the output of replay warnings") },
+ { Value,
+ "replay_persist",
+ "/var/run/openvpn-replay-state",
+ translate("Persist replay-protection state") },
+ { Flag,
+ "no_iv",
+ 0,
+ translate("Disable cipher initialisation vector") },
+ { Flag,
+ "tls_server",
+ 0,
+ translate("Enable TLS and assume server role"),
+ { tls_client="" }, { tls_client="0" } },
+ { Flag,
+ "tls_client",
+ 0,
+ translate("Enable TLS and assume client role"),
+ { tls_server="" }, { tls_server="0" } },
+ { FileUpload,
+ "ca",
+ "/etc/easy-rsa/keys/ca.crt",
+ translate("Certificate authority") },
+ { FileUpload,
+ "dh",
+ "/etc/easy-rsa/keys/dh1024.pem",
+ translate("Diffie Hellman parameters") },
+ { FileUpload,
+ "cert",
+ "/etc/easy-rsa/keys/some-client.crt",
+ translate("Local certificate") },
+ { FileUpload,
+ "key",
+ "/etc/easy-rsa/keys/some-client.key",
+ translate("Local private key") },
+ { FileUpload,
+ "pkcs12",
+ "/etc/easy-rsa/keys/some-client.pk12",
+ translate("PKCS#12 file containing keys") },
+ { ListValue,
+ "key_method",
+ { 1, 2 },
+ translate("Enable TLS and assume client role") },
+ { Value,
+ "tls_cipher",
+ "DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:DES-CBC3-SHA:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:AES128-SHA:RC4-SHA:RC4-MD5:EDH-RSA-DES-CBC-SHA:EDH-DSS-DES-CBC-SHA:DES-CBC-SHA:EXP-EDH-RSA-DES-CBC-SHA:EXP-EDH-DSS-DES-CBC-SHA:EXP-DES-CBC-SHA:EXP-RC2-CBC-MD5:EXP-RC4-MD5",
+ translate("TLS cipher") },
+ { Value,
+ "tls_timeout",
+ 2,
+ translate("Retransmit timeout on TLS control channel") },
+ { Value,
+ "reneg_bytes",
+ 1024,
+ translate("Renegotiate data chan. key after bytes") },
+ { Value,
+ "reneg_pkts",
+ 100,
+ translate("Renegotiate data chan. key after packets") },
+ { Value,
+ "reneg_sec",
+ 3600,
+ translate("Renegotiate data chan. key after seconds") },
+ { Value,
+ "hand_window",
+ 60,
+ translate("Timeframe for key exchange") },
+ { Value,
+ "tran_window",
+ 3600,
+ translate("Key transition window") },
+ { Flag,
+ "single_session",
+ 0,
+ translate("Allow only one session") },
+ { Flag,
+ "tls_exit",
+ 0,
+ translate("Exit on TLS negotiation failure") },
+ { Value,
+ "tls_auth",
+ "/etc/openvpn/tlsauth.key",
+ translate("Additional authentication over TLS") },
+ -- { Value,
+ -- "askpass",
+ -- "[file]",
+ -- translate("Get PEM password from controlling tty before we daemonize") },
+ { Flag,
+ "auth_nocache",
+ 0,
+ translate("Don't cache --askpass or --auth-user-pass passwords") },
+ { Value,
+ "tls_remote",
+ "remote_x509_name",
+ translate("Only accept connections from given X509 name") },
+ { ListValue,
+ "ns_cert_type",
+ { "client", "server" },
+ translate("Require explicit designation on certificate") },
+ { ListValue,
+ "remote_cert_tls",
+ { "client", "server" },
+ translate("Require explicit key usage on certificate") },
+ { Value,
+ "crl_verify",
+ "/etc/easy-rsa/keys/crl.pem",
+ translate("Check peer certificate against a CRL") },
+ { Value,
+ "tls_version_min",
+ "1.0",
+ translate("The lowest supported TLS version") },
+ { Value,
+ "tls_version_max",
+ "1.2",
+ translate("The highest supported TLS version") },
+ { Value,
+ "key_direction",
+ "1",
+ translate("The key direction for 'tls-auth' and 'secret' options") },
+ } }
}
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2014-03-29 23:19+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
+"PO-Revision-Date: 2017-02-20 18:04-0300\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
"Language: pt_BR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
+"Language-Team: \n"
msgid "%s"
msgstr "%s"
msgstr "Não registar a data/hora"
msgid "Don't pull routes automatically"
-msgstr ""
+msgstr "Não puxe as rotas automaticamente"
msgid "Don't re-read key on restart"
msgstr "Não reler a chave entre os reinícios"
msgstr "Diretório temporário para arquivo de retorno de conexão-cliente"
msgid "The highest supported TLS version"
-msgstr ""
+msgstr "A mais alta versão suporta do TLS"
msgid "The key direction for 'tls-auth' and 'secret' options"
-msgstr ""
+msgstr "A direção da chave para as opções 'tls-auth' e 'secret'"
msgid "The lowest supported TLS version"
-msgstr ""
+msgstr "A mais baixa versão suporta do TLS"
msgid "Timeframe for key exchange"
msgstr "Janela temporal para troca de chaves"
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2011-11-04 18:11+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
+"PO-Revision-Date: 2016-12-22 01:08+0900\n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
"Language: ja\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
+"X-Generator: Poedit 1.8.11\n"
+"Language-Team: \n"
msgid "Bidirectional mode"
msgstr "双方向モード"
"るためのパッケージをインストールしてください。"
msgid "Interface"
-msgstr ""
+msgstr "インターフェース"
msgid "Port"
msgstr "ポート番号"
msgstr "設定"
msgid "Specifies the interface to listen on."
-msgstr ""
+msgstr "待ち受けるインターフェースを指定します。"
msgid "TCP listener port."
msgstr "TCP接続待ちポート"
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Language: pt_BR\n"
+
+msgid ""
+"A URL to be displayed in the error page that users will see if access to an "
+"untrusted page is denied."
+msgstr ""
+"A URL a ser exibida na página de erro que os usuários verão se o acesso a "
+"uma página não confiável é negado."
+
+msgid ""
+"A URL to documentation about the local Privoxy setup, configuration or "
+"policies."
+msgstr ""
+"A URL para a documentação sobre o Privoxy local, configuração ou políticas."
+
+msgid "A directory where Privoxy can create temporary files."
+msgstr "Um diretório onde Privoxy pode criar arquivos temporários."
+
+msgid "Access Control"
+msgstr "Controle de Acesso"
+
+msgid "Actions that are applied to all sites and maybe overruled later on."
+msgstr ""
+"Ações que são aplicadas a todos as páginas e talvez descartado mais tarde."
+
+msgid "An alternative directory where the templates are loaded from."
+msgstr "Um diretório alternativo de onde os modelos são carregados."
+
+msgid "An email address to reach the Privoxy administrator."
+msgstr "Um endereço de e-mail para alcançar o administrador do Privoxy."
+
+msgid ""
+"Assumed server-side keep-alive timeout (in seconds) if not specified by the "
+"server."
+msgstr ""
+"Tempo limite, em segundos, da manutenção da conexão (keep-alive) do servidor "
+"se não for especificado."
+
+msgid "Boot delay"
+msgstr "Atraso de iniciação"
+
+msgid "CGI user interface"
+msgstr "Interface de usuário CGI"
+
+msgid "Common Log Format"
+msgstr "Formato de registros (log) comum"
+
+msgid ""
+"Configure here the routing of HTTP requests through a chain of multiple "
+"proxies. Note that parent proxies can severely decrease your privacy level. "
+"Also specified here are SOCKS proxies."
+msgstr ""
+"Configure aqui o encaminhamento de pedidos HTTP através de uma cadeia de "
+"múltiplos proxies. Note-se que proxies pai pode diminuir muito o nível de "
+"privacidade. Também serão aceitos proxies SOCKS."
+
+msgid "Debug GIF de-animation"
+msgstr "Depurar de-animação GIF"
+
+msgid "Debug force feature"
+msgstr "Recurso de depuração forçado"
+
+msgid "Debug redirects"
+msgstr "Redirecionamentos de depuração"
+
+msgid "Debug regular expression filters"
+msgstr "Depuração de filtros de expressão regular"
+
+msgid "Delay (in seconds) during system boot before Privoxy start"
+msgstr ""
+"Atraso (em segundos) durante a inicialização do sistema antes do Privoxy "
+"iniciar"
+
+msgid "Directory does not exist!"
+msgstr "O diretório não existe!"
+
+msgid "Disabled == Transparent Proxy Mode"
+msgstr "Desativado == Modo Proxy Transparente"
+
+msgid "Documentation"
+msgstr "Documentação"
+
+msgid "During delay ifup-events are not monitored !"
+msgstr "Durante a espera, eventos ifup não serão monitorados!"
+
+msgid "Enable proxy authentication forwarding"
+msgstr "Habilitar o encaminhamento de autenticação de proxy"
+
+msgid ""
+"Enable/Disable autostart of Privoxy on system startup and interface events"
+msgstr ""
+"Ativar/Desativar a iniciação automática do Privoxy junto com a iniciação do "
+"sistema ou eventos de interface"
+
+msgid "Enable/Disable filtering when Privoxy starts."
+msgstr "Ativar / Desativar filtragem quando Privoxy iniciar."
+
+msgid "Enabled"
+msgstr "Habilitado"
+
+msgid ""
+"Enabling this option is NOT recommended if there is no parent proxy that "
+"requires authentication!"
+msgstr ""
+"A ativação dessa opção não é recomendado se não houver nenhum proxy pai que "
+"requer autenticação!"
+
+msgid "File '%s' not found inside Configuration Directory"
+msgstr "O arquivo '%s' não foi encontrado dentro do Diretório de Configuração"
+
+msgid "File not found or empty"
+msgstr "Arquivo não encontrado ou vazio"
+
+msgid "Files and Directories"
+msgstr "Arquivos e diretórios"
+
+msgid "For help use link at the relevant option"
+msgstr "Para ajuda, use o link na respectiva opção"
+
+msgid "Forwarding"
+msgstr "Encaminhando"
+
+msgid ""
+"If enabled, Privoxy hides the 'go there anyway' link. The user obviously "
+"should not be able to bypass any blocks."
+msgstr ""
+"Se ativado, Privoxy esconde o link \"ir lá de qualquer maneira\". O usuário, "
+"obviamente, não deve ser capaz de contornar qualquer bloqueio."
+
+msgid ""
+"If you intend to operate Privoxy for more users than just yourself, it might "
+"be a good idea to let them know how to reach you, what you block and why you "
+"do that, your policies, etc."
+msgstr ""
+"Se você pretende operar Privoxy para mais usuários do que apenas a si mesmo, "
+"pode ser uma boa ideia para que eles saibam como falar com você, o que você "
+"bloquear e por que você faz isso, as suas políticas, etc."
+
+msgid "Invalid email address"
+msgstr "Endereço de e-mail inválido"
+
+msgid "It is NOT recommended for the casual user."
+msgstr "Não é recomendado para o usuário casual."
+
+msgid "Location of the Privoxy User Manual."
+msgstr "Localização do Manual do Usuário do Privoxy."
+
+msgid "Log File Viewer"
+msgstr "Visualizador de arquivo de registros (log)"
+
+msgid "Log all data read from the network"
+msgstr "Registrar todos os dados lidos da rede"
+
+msgid "Log all data written to the network"
+msgstr "Registrar todos os dados gravados na rede"
+
+msgid "Log the applying actions"
+msgstr "Registrar as ações aplicadas"
+
+msgid ""
+"Log the destination for each request Privoxy let through. See also 'Debug "
+"1024'."
+msgstr ""
+"Registrar o destino para cada pedido que o Privoxy deixou passar. Consulte "
+"também 'Debug 1024'."
+
+msgid ""
+"Log the destination for requests Privoxy didn't let through, and the reason "
+"why."
+msgstr ""
+"Registrar o destino para os pedidos que o Privoxy não deixou passar, e a "
+"razão pela qual."
+
+msgid "Logging"
+msgstr "Registrando (logging)"
+
+msgid "Main actions file"
+msgstr "Arquivo principal de ações"
+
+msgid "Mandatory Input: No Data given!"
+msgstr "Entrada obrigatória: Dados não foram informados!"
+
+msgid "Mandatory Input: No Directory given!"
+msgstr "Entrada obrigatória: Nenhum Diretório foi informado!"
+
+msgid "Mandatory Input: No File given!"
+msgstr "Entrada obrigatória: Nenhum Arquivo foi informado!"
+
+msgid "Mandatory Input: No Port given!"
+msgstr "Entrada obrigatória: Nenhuma Porta foi informado!"
+
+msgid "Mandatory Input: No files given!"
+msgstr "Entrada obrigatória: Nenhum Arquivo foi informado!"
+
+msgid "Mandatory Input: No valid IPv4 address or host given!"
+msgstr ""
+"Entrada obrigatória: Nenhum endereço IPv4 ou nome de equipamento válido foi "
+"fornecido!"
+
+msgid "Mandatory Input: No valid IPv6 address given!"
+msgstr "Entrada obrigatória: Nenhum endereço IPv6 válido foi informado!"
+
+msgid "Mandatory Input: No valid Port given!"
+msgstr "Entrada obrigatória: Nenhuma porta válida foi informada!"
+
+msgid "Maximum number of client connections that will be served."
+msgstr "O número máximo de conexões de cliente que será aceito."
+
+msgid "Maximum size (in KB) of the buffer for content filtering."
+msgstr "Tamanho máximo (em KB) do buffer para filtragem de conteúdo."
+
+msgid "Miscellaneous"
+msgstr "Diversos"
+
+msgid "NOT installed"
+msgstr "NÃO instalado"
+
+msgid "No trailing '/', please."
+msgstr "Sem '/' final, por favor."
+
+msgid "Non-fatal errors - *we highly recommended enabling this*"
+msgstr "Erros não fatais - *é altamente recomendado ativar isto*"
+
+msgid ""
+"Number of seconds after which a socket times out if no data is received."
+msgstr ""
+"Número de segundos após o qual uma conexão expira se nenhum dado for "
+"recebido."
+
+msgid ""
+"Number of seconds after which an open connection will no longer be reused."
+msgstr ""
+"Número de segundos após o qual uma conexão aberta deixará de ser reutilizada."
+
+msgid ""
+"Only when using 'external filters', Privoxy has to create temporary files."
+msgstr ""
+"Somente quando for usado os \"filtros externos\". O Privoxy tem que criar "
+"arquivos temporários."
+
+msgid "Please install current version !"
+msgstr "Por favor, instale a versão atual!"
+
+msgid "Please press [Read] button"
+msgstr "Por favor, pressione o botão [Ler]"
+
+msgid "Please read Privoxy manual for details!"
+msgstr "Por favor, leia o manual do Privoxy para mais detalhes!"
+
+msgid "Please update to the current version!"
+msgstr "Por favor, atualize para a versão atual!"
+
+msgid "Privoxy WEB proxy"
+msgstr "Privoxy Web Proxy"
+
+msgid ""
+"Privoxy can (and normally does) use a number of other files for additional "
+"configuration, help and logging. This section of the configuration file "
+"tells Privoxy where to find those other files."
+msgstr ""
+"Privoxy pode (e normalmente o faz) utilizar uma série de outros arquivos de "
+"configuração, ajuda e de registros. Esta seção do arquivo de configuração "
+"informa o Privoxy onde encontrar os outros arquivos."
+
+msgid ""
+"Privoxy is a non-caching web proxy with advanced filtering capabilities for "
+"enhancing privacy, modifying web page data and HTTP headers, controlling "
+"access, and removing ads and other obnoxious Internet junk."
+msgstr ""
+"Privoxy é um proxy web sem cache com capacidades avançadas de filtragem para "
+"aumentar a privacidade, modificar dados de páginas web e cabeçalhos HTTP, "
+"controlar o acesso e remover anúncios e outras porcarias detestável da "
+"Internet."
+
+msgid "Read / Reread log file"
+msgstr "Ler / Ler novamente o arquivo de registros (log)"
+
+msgid "Show I/O status"
+msgstr "Mostrar status de Entrada/Saída"
+
+msgid "Show each connection status"
+msgstr "Mostrar cada estado de conexão"
+
+msgid "Show header parsing"
+msgstr "Mostrar análise do cabeçalho"
+
+msgid "Software package '%s' is not installed."
+msgstr "O pacote de software '%s' não está instalado."
+
+msgid "Software package '%s' is outdated."
+msgstr "O pacote '%' está desatualizado."
+
+msgid "Start"
+msgstr "Iniciar"
+
+msgid "Start / Stop"
+msgstr "Iniciar / Parar"
+
+msgid "Start/Stop Privoxy WEB Proxy"
+msgstr "Inicia / Para o Privoxy Web Proxy"
+
+msgid "Startup banner and warnings."
+msgstr "Mensagens e avisos iniciais."
+
+msgid "Syntax:"
+msgstr "Sintaxe:"
+
+msgid "Syntax: Client header names delimited by spaces."
+msgstr "Sintaxe: nomes de cabeçalho do cliente delimitados por espaços."
+
+msgid "Syntax: target_pattern http_parent[:port]"
+msgstr "Sintaxe: padrão_alvo http_superior[:porta]"
+
+msgid "Syntax: target_pattern socks_proxy[:port] http_parent[:port]"
+msgstr "Sintaxe: padrão_alvo proxy_socks[:porta] http_superior[:porta]"
+
+msgid "System"
+msgstr "Sistema"
+
+msgid ""
+"The actions file(s) to use. Multiple actionsfile lines are permitted, and "
+"are in fact recommended!"
+msgstr ""
+"O(s) arquivo(s) ações a ser usado. Várias linhas no arquivo são permitidas, "
+"e são, de fato, recomendadas!"
+
+msgid ""
+"The address and TCP port on which Privoxy will listen for client requests."
+msgstr ""
+"O endereço e porta TCP em que Privoxy vai esperar por pedidos dos clientes."
+
+msgid ""
+"The compression level that is passed to the zlib library when compressing "
+"buffered content."
+msgstr ""
+"O nível de compressão que é passada para a biblioteca zlib ao comprimir o "
+"conteúdo em buffer."
+
+msgid ""
+"The directory where all logging takes place (i.e. where the logfile is "
+"located)."
+msgstr ""
+"O diretório onde todos os registros ocorrem (ex: onde o arquivo de log está "
+"localizado)."
+
+msgid "The directory where the other configuration files are located."
+msgstr "O diretório onde os outros arquivos de configuração estão localizados."
+
+msgid ""
+"The filter files contain content modification rules that use regular "
+"expressions."
+msgstr ""
+"Os arquivos de filtro contêm regras de modificação de conteúdo que usam "
+"expressões regulares."
+
+msgid "The hostname shown on the CGI pages."
+msgstr "O nome da máquina mostrado nas páginas de CGI."
+
+msgid "The log file to use. File name, relative to log directory."
+msgstr ""
+"O arquivo de registros a ser usado. O nome do arquivo, relativo ao diretório "
+"de log."
+
+msgid "The order in which client headers are sorted before forwarding them."
+msgstr ""
+"A ordem em que os cabeçalhos dos clientes são classificados antes de "
+"encaminhá-los."
+
+msgid ""
+"The status code Privoxy returns for pages blocked with +handle-as-empty-"
+"document."
+msgstr ""
+"O código de status Privoxy retorna para páginas bloqueadas com +handle-as-"
+"empty-document."
+
+msgid ""
+"The trust mechanism is an experimental feature for building white-lists and "
+"should be used with care."
+msgstr ""
+"O mecanismo de confiança é um recurso experimental para a construção de "
+"listas de destinos confiáveis e deve ser usado com cuidado."
+
+msgid ""
+"The value of this option only matters if the experimental trust mechanism "
+"has been activated."
+msgstr ""
+"O valor desta opção só importa se o mecanismo de confiança experimental foi "
+"ativado."
+
+msgid ""
+"This option is only there for debugging purposes. It will drastically reduce "
+"performance."
+msgstr ""
+"Esta opção só está lá para fins de depuração. Ele irá reduzir drasticamente "
+"o desempenho."
+
+msgid ""
+"This option will be removed in future releases as it has been obsoleted by "
+"the more general header taggers."
+msgstr ""
+"Esta opção será removida em versões futuras, uma vez que ficou obsoleta "
+"pelos marcadores de cabeçalho mais genéricos."
+
+msgid ""
+"This tab controls the security-relevant aspects of Privoxy's configuration."
+msgstr ""
+"Esta guia controla os aspectos da configuração do Privoxy relevantes para a "
+"segurança."
+
+msgid ""
+"Through which SOCKS proxy (and optionally to which parent HTTP proxy) "
+"specific requests should be routed."
+msgstr ""
+"Através de qual Proxy SOCKS (e, opcionalmente, para o qual proxy HTTP "
+"superior) pedidos específicos devem ser encaminhados."
+
+msgid "To which parent HTTP proxy specific requests should be routed."
+msgstr ""
+"Para qual proxy HTTP superior os pedidos específicos devem ser encaminhados."
+
+msgid "User customizations"
+msgstr "Personalizações do usuário"
+
+msgid "Value is not a number"
+msgstr "O valor não é um número"
+
+msgid "Value not between 0 and 300"
+msgstr "Valor não está entre 0 e 300"
+
+msgid "Value not between 0 and 9"
+msgstr "Valor não está entre 0 e 9"
+
+msgid "Value not between 1 and 4096"
+msgstr "Valor não entre 1 e 4096"
+
+msgid "Value not greater 0 or empty"
+msgstr "Valor não é maior que 0 ou vazio"
+
+msgid "Value range 1 to 4096, no entry defaults to 4096"
+msgstr "Faixa do valor de 1 até 4096. Se vazio, será 4096"
+
+msgid "Version"
+msgstr "Versão"
+
+msgid "Version Information"
+msgstr "Informação da Versão"
+
+msgid "Whether intercepted requests should be treated as valid."
+msgstr "Se as solicitações interceptados deve ser tratadas como válidas."
+
+msgid ""
+"Whether or not Privoxy recognizes special HTTP headers to change toggle "
+"state."
+msgstr ""
+"Se o Privoxy deve reconhecer cabeçalhos HTTP especiais para mudar de "
+"alternância do estado."
+
+msgid "Whether or not buffered content is compressed before delivery."
+msgstr "Se o conteúdo em buffer é comprimido antes da entrega."
+
+msgid ""
+"Whether or not outgoing connections that have been kept alive should be "
+"shared between different incoming connections."
+msgstr ""
+"Se as conexões de saída que foram mantidas vivas devem ser compartilhadas "
+"entre diferentes conexões de entrada."
+
+msgid "Whether or not pipelined requests should be served."
+msgstr "Se os pedidos de pipeline deve ser aceitos."
+
+msgid "Whether or not proxy authentication through Privoxy should work."
+msgstr "Se a autenticação de proxy através do Privoxy deve funcionar."
+
+msgid "Whether or not the web-based actions file editor may be used."
+msgstr "Se o editor de arquivos de ações baseadas na web deve ser utilizado."
+
+msgid "Whether or not the web-based toggle feature may be used."
+msgstr "Se deve ser usado o recurso de alternância baseado na web."
+
+msgid "Whether requests to Privoxy's CGI pages can be blocked or redirected."
+msgstr ""
+"Se as solicitações para páginas CGI do Privoxy podem ser bloqueadas ou "
+"redirecionadas."
+
+msgid ""
+"Whether the CGI interface should stay compatible with broken HTTP clients."
+msgstr ""
+"Se a interface CGI deve se manter compatível com clientes HTTP mal "
+"implementados."
+
+msgid "Whether to run only one server thread."
+msgstr "Se deseja executar o servidor como apenas uma thread."
+
+msgid "Who can access what."
+msgstr "Quem pode acessar o quê."
+
+msgid "installed"
+msgstr "instalado"
+
+msgid "or higher"
+msgstr "ou maior"
+
+msgid "required"
+msgstr "necessário"
msgstr ""
"Project-Id-Version: luci-app-privoxy\n"
"POT-Creation-Date: 2015-06-10 20:16+0100\n"
-"PO-Revision-Date: 2015-06-10 20:16+0100\n"
+"PO-Revision-Date: 2017-01-05 18:01+0800\n"
"Last-Translator: maz-1 <ohmygod19993 at gmail dotcom>\n"
"Language-Team: \n"
-"Language: zh-cn\n"
+"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 1.5.4\n"
+"X-Generator: Poedit 1.8.11\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Poedit-SourceCharset: UTF-8\n"
msgid ""
"A URL to documentation about the local Privoxy setup, configuration or "
"policies."
-msgstr "指向Privoxy安装、设置和规则说明文档的URL"
+msgstr "指向 Privoxy 安装、设置和规则说明文档的 URL"
msgid "A directory where Privoxy can create temporary files."
-msgstr "Privoxy存放临时文件的目录。"
+msgstr "Privoxy 存放临时文件的目录。"
msgid "Access Control"
msgstr "访问控制"
msgstr "可选的目录，放在里面的模板会被加载。"
msgid "An email address to reach the Privoxy administrator."
-msgstr "用于联系privoxy管理员的邮箱地址。"
+msgstr "用于联系 Privoxy 管理员的邮箱地址。"
msgid ""
"Assumed server-side keep-alive timeout (in seconds) if not specified by the "
"server."
-msgstr "当服务端没有指定超时时间时假定的超时时间（单位秒）。"
+msgstr "当服务端没有指定超时时间时假定的超时时间（单位：秒）。"
msgid "Boot delay"
-msgstr ""
+msgstr "启动延时"
msgid "CGI user interface"
-msgstr "CGI用户界面"
+msgstr "CGI 用户界面"
msgid "Common Log Format"
msgstr "通用日志格式"
"proxies. Note that parent proxies can severely decrease your privacy level. "
"Also specified here are SOCKS proxies."
msgstr ""
-"在这里设置http请求所经过的多重代理链。注意父级代理可能严重降低你的隐私安全"
-"度ã\80\82å\9c¨è¿\99é\87\8cè¿\98å\8f¯ä»¥è®¾ç½®SOCKS代理。"
+"在这里设置 HTTP 请求所经过的多重代理链。注意：父级代理可能严重降低你的隐私安"
+"å\85¨åº¦ã\80\82å\9c¨è¿\99é\87\8cè¿\98å\8f¯ä»¥è®¾ç½® SOCKS 代理。"
msgid "Debug GIF de-animation"
msgstr "GIF动画日志"
msgid "Debug force feature"
-msgstr "force feature日志"
+msgstr "Force feature 日志"
msgid "Debug redirects"
msgstr "重定向日志"
msgstr "正则表达式日志"
msgid "Delay (in seconds) during system boot before Privoxy start"
-msgstr ""
+msgstr "Privoxy 自启动延迟时间（单位：秒）"
msgid "Directory does not exist!"
msgstr "目录不存在！"
msgstr "禁用 == 透明代理模式"
msgid "Documentation"
-msgstr ""
+msgstr "记录信息"
msgid "During delay ifup-events are not monitored !"
-msgstr ""
+msgstr "在延迟期间无法检测到 ifup 事件！"
msgid "Enable proxy authentication forwarding"
msgstr "允许转发代理认证"
msgid ""
"Enable/Disable autostart of Privoxy on system startup and interface events"
-msgstr "开启/关闭Privoxy在系统启动或者设置界面更改时自动启动。"
+msgstr "开启/关闭 Privoxy 在系统启动或接口事件时自动启动。"
msgid "Enable/Disable filtering when Privoxy starts."
-msgstr "Privoxy启动时开启/关闭过滤。"
+msgstr "Privoxy 启动时开启/关闭过滤。"
msgid "Enabled"
msgstr "已开启"
msgid ""
"Enabling this option is NOT recommended if there is no parent proxy that "
"requires authentication!"
-msgstr "父级代理不需要认证时不推荐开启这个选项！"
+msgstr "如果没有需要认证的父级代理时，不推荐开启这个选项！"
msgid "File '%s' not found inside Configuration Directory"
-msgstr "文件 '%s' 没有在设置目录中找到！"
+msgstr "在设置目录中未找到文件 '%S'！"
msgid "File not found or empty"
msgstr "文件不存在或为空"
msgstr "文件和目录"
msgid "For help use link at the relevant option"
-msgstr "在相应选项下的连接可获取帮助。"
+msgstr "点击相应选项的连接可获取帮助。"
msgid "Forwarding"
msgstr "转发"
msgid ""
"If enabled, Privoxy hides the 'go there anyway' link. The user obviously "
"should not be able to bypass any blocks."
-msgstr "如果启用，Privoxy会隐藏'go there anyway'链接。用户显然不应能绕过屏蔽。"
+msgstr "如果启用，Privoxy 会隐藏 'go there anyway' 链接，用户就不能绕过屏蔽。"
msgid ""
"If you intend to operate Privoxy for more users than just yourself, it might "
"be a good idea to let them know how to reach you, what you block and why you "
"do that, your policies, etc."
msgstr ""
-"如果除了你还有其他用户通过privoxy连接，让他们知道如何联系你、什么内容被屏蔽"
-"äº\86ã\80\81ä½ ä¸ºä»\80ä¹\88è¦\81è¿\99ä¹\88å\81\9aã\80\81ä½ æ\89\80å\88¶å®\9aç\9a\84è§\84è\8c\83ç\89ç\89æ\98¯ä¸\80个好主æ\84\8f。"
+"如果除了你还有其他用户使用 Privoxy 连接，最好让他们知道如何联系你，你屏蔽什"
+"ä¹\88ï¼\8cä½ ä¸ºä»\80ä¹\88è¿\99æ ·å\81\9aï¼\8cä½ ç\9a\84æ\94¿ç\96ç\89ç\89。"
msgid "Invalid email address"
msgstr "邮箱地址无效"
msgstr "不推荐新手使用。"
msgid "Location of the Privoxy User Manual."
-msgstr "Privoxy用户手册位置"
+msgstr "Privoxy 用户手册位置"
msgid "Log File Viewer"
msgstr "日志查看器"
msgid "Log all data read from the network"
-msgstr "记录所有从网络接收的数据"
+msgstr "记录所有接收的网络数据"
msgid "Log all data written to the network"
-msgstr "è®°å½\95æ\89\80æ\9c\89å\8f\91é\80\81ç»\99ç½\91ç»\9cç\9a\84数据"
+msgstr "è®°å½\95æ\89\80æ\9c\89å\8f\91é\80\81ç\9a\84ç½\91ç»\9c数据"
msgid "Log the applying actions"
-msgstr "记录被应用的规则"
+msgstr "记录配置保存动作"
msgid ""
"Log the destination for each request Privoxy let through. See also 'Debug "
"1024'."
-msgstr "记录Privoxy所允许的所有请求。另请参考'Debug 1024'。"
+msgstr "记录 Privoxy 允许的所有请求。另请参考 'Debug 1024'。"
msgid ""
"Log the destination for requests Privoxy didn't let through, and the reason "
"why."
-msgstr "记录被Privoxy拒绝的请求目标以及拒绝原因。"
+msgstr "记录 Privoxy 拒绝的请求目标以及拒绝原因。"
msgid "Logging"
msgstr "日志"
msgstr "客户端数量上限。"
msgid "Maximum size (in KB) of the buffer for content filtering."
-msgstr "内容过滤的最大缓冲（单位KB）。"
+msgstr "内容过滤的最大缓冲（单位：KB）。"
msgid "Miscellaneous"
msgstr "杂项"
msgid "NOT installed"
-msgstr ""
+msgstr "未安装"
msgid "No trailing '/', please."
-msgstr "路径结尾不要加'/' ."
+msgstr "路径结尾不要加 '/' 。"
msgid "Non-fatal errors - *we highly recommended enabling this*"
-msgstr "非致命性错误 - * 建议开启 *"
+msgstr "é\9d\9eè\87´å\91½æ\80§é\94\99误 - * 强ç\83\88建议å¼\80å\90¯ *"
msgid ""
"Number of seconds after which a socket times out if no data is received."
-msgstr "socket连接未收到数据的超时时间。"
+msgstr "Socket 连接未收到数据的超时时间。"
msgid ""
"Number of seconds after which an open connection will no longer be reused."
-msgstr "一个开放的连接不再重复使用的超时时间。"
+msgstr "开放的连接不再重复使用的超时时间。"
msgid ""
"Only when using 'external filters', Privoxy has to create temporary files."
-msgstr "只有使用外置规则时，privoxy才需要创建临时文件。"
+msgstr "只有使用外置规则时，Privoxy 才需要创建临时文件。"
msgid "Please install current version !"
-msgstr ""
+msgstr "请安装当前版本！"
msgid "Please press [Read] button"
-msgstr "请点击[读取]按钮"
+msgstr "请点击 [读取] 按钮"
msgid "Please read Privoxy manual for details!"
-msgstr "请阅读Privoxy手册以了解详情！"
+msgstr "请阅读 Privoxy 手册以了解详情！"
msgid "Please update to the current version!"
msgstr "请升级到当前版本！"
"configuration, help and logging. This section of the configuration file "
"tells Privoxy where to find those other files."
msgstr ""
-"Privoxy可以使用其他一些文件用于附加设置，帮助和日志。这个区域用来告诉Privoxy"
-"从哪里找到这些文件。"
+"Privoxy 可以使用其他一些文件用于附加设置，帮助和日志。这个区域用来告诉 "
+"Privoxy 从哪里找到这些文件。"
msgid ""
"Privoxy is a non-caching web proxy with advanced filtering capabilities for "
"enhancing privacy, modifying web page data and HTTP headers, controlling "
"access, and removing ads and other obnoxious Internet junk."
msgstr ""
-"Privoxy是一个无缓存的网络代理，具有高级过滤功能，能够修改网页数据和HTTP头，控"
-"制访问，移除广告等。"
+"Privoxy 是一个无缓存的网络代理，具有高级过滤功能，能够修改网页数据和 HTTP 请"
+"求头，控制访问，移除广告等。"
msgid "Read / Reread log file"
msgstr "读取/刷新日志文件"
msgstr "显示每个连接的状态"
msgid "Show header parsing"
-msgstr "Show header parsing"
+msgstr "显示请求头 解析"
msgid "Software package '%s' is not installed."
-msgstr ""
+msgstr "软件包 '%s' 未安装"
msgid "Software package '%s' is outdated."
-msgstr ""
+msgstr "软件包 '%s' 已过时"
msgid "Start"
msgstr "启动"
msgstr "格式:"
msgid "Syntax: Client header names delimited by spaces."
-msgstr "格式: Client header names delimited by spaces."
+msgstr "格式: 由空格分隔的客户端请求头名称。"
msgid "Syntax: target_pattern http_parent[:port]"
msgstr "格式: target_pattern http_parent[:port]"
msgstr "格式: target_pattern socks_proxy[:port] http_parent[:port]"
msgid "System"
-msgstr ""
+msgstr "系统"
msgid ""
"The actions file(s) to use. Multiple actionsfile lines are permitted, and "
msgid ""
"The address and TCP port on which Privoxy will listen for client requests."
-msgstr "Privoxy接收客户端请求时监听的地址和TCP端口。"
+msgstr "Privoxy 接收客户端请求时监听的地址和 TCP 端口。"
msgid ""
"The compression level that is passed to the zlib library when compressing "
"buffered content."
-msgstr "使用zlib压缩缓冲内容时的压缩级别。"
+msgstr "使用 zlib 压缩缓冲内容时的压缩级别。"
msgid ""
"The directory where all logging takes place (i.e. where the logfile is "
msgstr "日志文件名称，与日志路径相对。"
msgid "The order in which client headers are sorted before forwarding them."
-msgstr "转发数据前，client headers的排序。"
+msgstr "转发数据前，客户端请求头的排序。"
msgid ""
"The status code Privoxy returns for pages blocked with +handle-as-empty-"
"document."
msgstr ""
-"当页面因为handle-as-empty-document规则被阻止时返回的状态码（选上为200 OK，不"
-"选上为403 Forbidden）"
+"当页面因为 handle-as-empty-document 规则被阻止时返回的状态码（选上为 200 OK，"
+"不选上为 403 Forbidden）"
msgid ""
"The trust mechanism is an experimental feature for building white-lists and "
msgid ""
"This option will be removed in future releases as it has been obsoleted by "
"the more general header taggers."
-msgstr "这个选项在以后的版本中将被移除，因为它被header taggers所取代了。"
+msgstr "这个选项在以后的版本中将被移除，因为它被 header taggers 所取代了。"
msgid ""
"This tab controls the security-relevant aspects of Privoxy's configuration."
-msgstr "这个标签用于设置与安全相关的Privoxy选项。"
+msgstr "这个标签用于设置与安全相关的 Privoxy 选项。"
msgid ""
"Through which SOCKS proxy (and optionally to which parent HTTP proxy) "
"specific requests should be routed."
-msgstr "指定的请求应该通过哪一个SOCKS代理（并且通过哪一个HTTP父代理，可选）"
+msgstr ""
+"指定的请求应该通过哪一个 SOCKS 代理（并且通过哪一个 HTTP 父代理，可选）"
msgid "To which parent HTTP proxy specific requests should be routed."
-msgstr "请求应转发至哪一个父级HTTP代理。"
+msgstr "请求应转发至哪一个父级 HTTP 代理。"
msgid "User customizations"
msgstr "用户自定义"
msgstr "输入值不是数字"
msgid "Value not between 0 and 300"
-msgstr ""
+msgstr "输入值不在0和300之间"
msgid "Value not between 0 and 9"
-msgstr "输入值不在0和9之间。"
+msgstr "输入值不在0和9之间"
msgid "Value not between 1 and 4096"
msgstr "输入值不在1和4096之间"
msgid ""
"Whether or not Privoxy recognizes special HTTP headers to change toggle "
"state."
-msgstr "Privoxy是否识别特殊的HTTP头以切换状态。"
+msgstr "Privoxy 是否识别特殊的 HTTP 请求头以切换状态。"
msgid "Whether or not buffered content is compressed before delivery."
msgstr "缓冲内容在传递之前是否压缩。"
msgstr "是否处理管道化的请求。"
msgid "Whether or not proxy authentication through Privoxy should work."
-msgstr "是否可以通过Privoxy进行代理验证。"
+msgstr "是否可以通过 Privoxy 进行代理验证。"
msgid "Whether or not the web-based actions file editor may be used."
msgstr "是否使用基于网页的规则编辑器。"
msgstr "是否启用基于网页的切换功能。"
msgid "Whether requests to Privoxy's CGI pages can be blocked or redirected."
-msgstr "访问Privoxy CGI页面的请求是否可以被拦截或重定向。"
+msgstr "访问 Privoxy CGI 页面的请求是否可以被拦截或重定向。"
msgid ""
"Whether the CGI interface should stay compatible with broken HTTP clients."
-msgstr "CGI界面是否应兼容过时的HTTP客户端。"
+msgstr "CGI 界面是否应兼容过时的HTTP客户端。"
msgid "Whether to run only one server thread."
msgstr "是否只运行一个服务线程。"
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2011-10-28 11:02+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
+"PO-Revision-Date: 2016-12-22 01:54+0900\n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
"Language: ja\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
+"X-Generator: Poedit 1.8.11\n"
+"Language-Team: \n"
msgid "Calculate overhead"
msgstr "オーバーヘッドを考慮する"
msgstr "区分グループ"
msgid "Comment"
-msgstr ""
+msgstr "コメント"
msgid "Destination host"
msgstr "宛先ホスト"
msgstr "プロトコル"
msgid "QoS"
-msgstr ""
+msgstr "QoS"
msgid "Quality of Service"
msgstr "Quality of Service"
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Language: pt_BR\n"
+
+msgid ""
+"'AUTO' selects the highest protocol version that client and server support."
+msgstr "'AUTO' seleciona a versão mais alto protocolo que o cliente e o servidor suportar."
+
+msgid ""
+"'Hostname:Port' or 'IPv4:Port' or '[IPv6]:Port' Radicale should listen on"
+msgstr "'NomeDoEquipamento:porta' ou 'IPv4:Porta' ou '[IPv6]:Porta' em que o Radicale deve escutar"
+
+msgid "AUTO"
+msgstr "AUTO"
+
+msgid "Access-Control-Allow-Headers"
+msgstr "Access-Control-Allow-Headers"
+
+msgid "Access-Control-Allow-Methods"
+msgstr "Access-Control-Allow-Methods"
+
+msgid "Access-Control-Allow-Origin"
+msgstr "Access-Control-Allow-Origin"
+
+msgid "Access-Control-Expose-Headers"
+msgstr "Access-Control-Expose-Headers"
+
+msgid "Additional HTTP headers"
+msgstr "Additional HTTP headers"
+
+msgid "Address:Port"
+msgstr "Endereço: Porta"
+
+#, fuzzy
+msgid "Authentication"
+msgstr "Autenticação"
+
+msgid ""
+"Authentication login is matched against the 'user' key, and collection's "
+"path is matched against the 'collection' key."
+msgstr "O nome do usuário na autenticação é comparado com a chave do 'user', e o caminho da coleção é comparado com a chave 'coleção'."
+
+msgid "Authentication method"
+msgstr "Método de autenticação"
+
+msgid "Authentication method to allow access to Radicale server."
+msgstr "Método de autenticação para permitir o acesso ao servidor Radicale."
+
+msgid "Auto-start"
+msgstr "Iniciar automaticamente"
+
+msgid "Boot delay"
+msgstr "Atraso na iniciação"
+
+msgid "CalDAV/CardDAV"
+msgstr "CalDAV/CardDAV"
+
+msgid ""
+"Calendars and address books are available for both local and remote access, "
+"possibly limited through authentication policies."
+msgstr "Agendas e contados estão disponíveis tanto para acesso local como remoto, possivelmente limitado através das políticas de autenticação."
+
+msgid "Certificate file"
+msgstr "Arquivo do certificado"
+
+msgid ""
+"Change here the encoding Radicale will use instead of 'UTF-8' for responses "
+"to the client and/or to store data inside collections."
+msgstr "Mude aqui a codificação que o Radicale usará em vez de 'UTF-8' para respostas a clientes ou para armazenar dados dentro das coleções."
+
+msgid "Ciphers"
+msgstr "Cifras"
+
+msgid "Console Log level"
+msgstr "Nível de detalhamento dos registros (log)"
+
+msgid "Control the access to data collections."
+msgstr "Controlar o acesso às coleções de dados."
+
+#, fuzzy
+msgid "Critical"
+msgstr "Crítico"
+
+msgid ""
+"Cross-origin resource sharing (CORS) is a mechanism that allows restricted "
+"resources (e.g. fonts, JavaScript, etc.) on a web page to be requested from "
+"another domain outside the domain from which the resource originated."
+msgstr "O compartilhamento de recursos de origem cruzada (CORS) é um mecanismo que permite que os recursos de acesso restrito (por exemplo, fontes, JavaScript, etc.) em uma página web ser solicitado de outro domínio fora do domínio a partir do qual o recurso foi originado."
+
+msgid "Custom"
+msgstr "Personalizadas"
+
+msgid "Database"
+msgstr "Banco de Dados"
+
+#, fuzzy
+msgid "Debug"
+msgstr "Depuração"
+
+msgid "Delay (in seconds) during system boot before Radicale start"
+msgstr "Atraso (em segundos) durante a inicialização do sistema antes do Radicale iniciar"
+
+#, fuzzy
+msgid "Directory"
+msgstr "Diretório"
+
+msgid "Directory not exists/found !"
+msgstr "O diretório não foi encontrado!"
+
+msgid "Directory required !"
+msgstr "O diretório é necessário!"
+
+msgid "Directory where the rotating log-files are stored"
+msgstr "O diretório onde os registros(log) rotativos são armazenados"
+
+msgid "During delay ifup-events are not monitored !"
+msgstr "Durante a espera, eventos ifup não serão monitorados!"
+
+msgid "Enable HTTPS"
+msgstr "Ativar HTTPS"
+
+msgid ""
+"Enable/Disable auto-start of Radicale on system start-up and interface events"
+msgstr "Ativar/Desativar iniciação automática do Radicale na iniciação do sistema e em eventos de interface"
+
+msgid "Encoding"
+msgstr "Codificação"
+
+msgid "Encoding for responding requests."
+msgstr "Codificação para responder pedidos."
+
+msgid "Encoding for storing local collections."
+msgstr "Codificação para armazenar coleções locais."
+
+msgid "Encryption method"
+msgstr "Método de criptografia"
+
+#, fuzzy
+msgid "Error"
+msgstr "Erro"
+
+msgid "File '%s' not found !"
+msgstr "Arquivo '%s' não encontrado!"
+
+msgid "File Log level"
+msgstr "Nível de detalhamento dos registos(log) em arquivos"
+
+msgid "File not found !"
+msgstr "Arquivo não encontrado!"
+
+msgid "File-system"
+msgstr "Sistema de arquivos"
+
+msgid ""
+"For example, for the 'user' key, '.+' means 'authenticated user' and '.*' "
+"means 'anybody' (including anonymous users)."
+msgstr "Por exemplo, para a chave 'user', '.+' Significa 'usuário autenticado' e '.*' Significa 'qualquer um' (incluindo usuários anônimos)."
+
+msgid "Full access for Owner only"
+msgstr "Acesso completo somente para o proprietário"
+
+msgid "Full access for authenticated Users"
+msgstr "Acesso completo para usuários autenticados"
+
+msgid "Full access for everybody (including anonymous)"
+msgstr "Acesso completo para todos (incluindo anônimo)"
+
+msgid "Full path and file name of certificate"
+msgstr "Caminho completo e nome do arquivo do certificado"
+
+msgid "Full path and file name of private key"
+msgstr "Caminho e arquivo nome completo da chave privada"
+
+#, fuzzy
+msgid "Info"
+msgstr "Informações"
+
+msgid "Keep in mind to use the correct hashing algorithm !"
+msgstr "Fique atento para usar o algoritmo de resumo digital(hash) correto!"
+
+msgid "Leading or ending slashes are trimmed from collection's path."
+msgstr "Barras inicias e finais serão removidas do caminho da coleção."
+
+msgid "Log-backup Count"
+msgstr "Contagem Registro(log) de Backup"
+
+msgid "Log-file Viewer"
+msgstr "Visualizador de Arquivo de Registros(log)"
+
+msgid "Log-file directory"
+msgstr "Diretório do arquivo de registros(log)"
+
+msgid "Log-file size"
+msgstr "Tamanho do arquivo de registros(log)"
+
+#, fuzzy
+msgid "Logging"
+msgstr "Registrando os eventos"
+
+msgid "Logon message"
+msgstr "Mensagem de entrada"
+
+msgid "Maximum size of each rotation log-file."
+msgstr "Tamanho máximo para a rotação do arquivo de registros(log)"
+
+msgid "Message displayed in the client when a password is needed."
+msgstr "Mensagem exibida para o cliente quando uma senha é necessária."
+
+#, fuzzy
+msgid "NOT installed"
+msgstr "NÃO instalado"
+
+#, fuzzy
+msgid "None"
+msgstr "Nada"
+
+msgid "Number of backup files of log to create."
+msgstr "Número de backups dos arquivos de registros(log) a serem criados."
+
+msgid "OPTIONAL: See python's ssl module for available ciphers"
+msgstr "Opcional: veja o módulo SSL do python para conhecer as cifras disponíveis"
+
+msgid "One or more missing/invalid fields on tab"
+msgstr "Um ou campos inválidos/ausentes na aba"
+
+msgid "Owner allow write, authenticated users allow read"
+msgstr "O proprietário pode escrever, os usuários autenticados podem ler"
+
+msgid "Path/File required !"
+msgstr "O caminho/arquivo é necessário!"
+
+msgid ""
+"Place here the 'user:password' pairs for your users which should have access "
+"to Radicale."
+msgstr "Coloque aqui os pares 'usuário:senha' para os seus usuários que devem ter acesso a Radicale."
+
+msgid "Please install current version !"
+msgstr "Por favor, instale a versão atual!"
+
+msgid "Please press [Reload] button below to reread the file."
+msgstr "Por favor, pressione o botão [Recarregar] abaixo para reler o arquivo."
+
+msgid "Please update to current version !"
+msgstr "Por favor, atualize para a versão atual!"
+
+msgid "Port numbers below 1024 (Privileged ports) are not supported"
+msgstr "Os porta abaixo de 1024 (portas privilegiadas) não são suportadas"
+
+msgid "Private key file"
+msgstr "Arquivo da chave privada"
+
+msgid "Radicale CalDAV/CardDAV Server"
+msgstr "Radicale Servidor CalDAV/CardDAV"
+
+msgid "Radicale uses '/etc/radicale/rights' as regexp-based file."
+msgstr "Radicale usa o '/etc/radicale/rights' como arquivo baseado em expressão regular."
+
+msgid "Radicale uses '/etc/radicale/users' as htpasswd file."
+msgstr "Radicale usa o '/etc/radicale/users' como o arquivo htpasswd."
+
+msgid "Read only!"
+msgstr "Somente leitura!"
+
+msgid "RegExp file"
+msgstr "Arquivo de expressões regulares"
+
+msgid "Reload"
+msgstr "Recarregar"
+
+msgid "Response Encoding"
+msgstr "Codificação da Resposta"
+
+msgid "Rights"
+msgstr "Direitos"
+
+msgid "Rights are based on a regexp-based file"
+msgstr "Os direitos são baseados em um arquivo baseado em expressões regulares"
+
+msgid "Rights backend"
+msgstr "Serviço de Direitos"
+
+msgid "SHA-1"
+msgstr "SHA-1"
+
+msgid "SSL Protocol"
+msgstr "Protocolo SSL"
+
+#, fuzzy
+msgid "Save"
+msgstr "Salvar"
+
+msgid "Section names are only used for naming the rule."
+msgstr "Os nomes das seção são usados apenas para nomear a regra."
+
+#, fuzzy
+msgid "Server"
+msgstr "Servidor"
+
+msgid "Setting this parameter to '0' will disable rotation of log-file."
+msgstr "Definindo este parâmetro para '0' irá desativar a rotação dos arquivos de registros(log)."
+
+msgid "Software package '%s' is not installed."
+msgstr "O pacote de software '%s' não está instalado."
+
+msgid "Software package '%s' is outdated."
+msgstr "O pacote '%' está desatualizado."
+
+#, fuzzy
+msgid "Software update required"
+msgstr "A atualização do software é necessária"
+
+#, fuzzy
+msgid "Start"
+msgstr "Iniciar"
+
+#, fuzzy
+msgid "Start / Stop"
+msgstr "Iniciar / Parar"
+
+msgid "Start/Stop Radicale server"
+msgstr "Iniciar/Parar o servidor Radicale"
+
+msgid "Storage"
+msgstr "Armazenamento"
+
+msgid "Storage Encoding"
+msgstr "Codificação do Armazenamento"
+
+msgid "Storage backend"
+msgstr "Serviço de armazenamento"
+
+msgid "Syslog Log level"
+msgstr "Nível de detalhamento do serviço de registro (syslog)"
+
+#, fuzzy
+msgid "System"
+msgstr "Sistema"
+
+msgid ""
+"The Radicale Project is a complete CalDAV (calendar) and CardDAV (contact) "
+"server solution."
+msgstr "O Projeto Radicale é uma solução completa de CalDAV (agenda) e CardDAV (contatos)."
+
+msgid ""
+"They can be viewed and edited by calendar and contact clients on mobile "
+"phones or computers."
+msgstr "Eles podem ser visualizados e editados pelos clientes de agenda e de contatos em telefones celulares ou computadores."
+
+msgid "To edit the file follow this link!"
+msgstr "Para editar o arquivo, siga este link!"
+
+msgid "To view latest log file follow this link!"
+msgstr "Para visualizar mais recente arquivo de registros(log), siga este link!"
+
+msgid "Value is not a number"
+msgstr "O valor não é um número"
+
+msgid "Value is not an Integer >= 0 !"
+msgstr "O valor não é um número natural (>=0)!"
+
+msgid "Value not between 0 and 300"
+msgstr "Valor não está entre 0 e 300"
+
+msgid "Value required ! Integer >= 0 !"
+msgstr "O valor é necessário! Número natural (>=0)!"
+
+#, fuzzy
+msgid "Version"
+msgstr "Versão"
+
+#, fuzzy
+msgid "Version Information"
+msgstr "Informação da Versão"
+
+msgid ""
+"WARNING: Only 'File-system' is documented and tested by Radicale development"
+msgstr "AVISO: Apenas 'Sistema de Arquivos "está documentado e testado pelo desenvolvimento do Radicale"
+
+#, fuzzy
+msgid "Warning"
+msgstr "Alerta"
+
+msgid ""
+"You can also get groups from the user regex in the collection with {0}, {1}, "
+"etc."
+msgstr "Você também pode obter grupos a partir da expressão regular do usuário na coleção com {0}, {1} , etc."
+
+msgid ""
+"You can use Python's ConfigParser interpolation values %(login)s and "
+"%(path)s."
+msgstr "Você pode usar a interpolação de valores %(login)s e %(path)s do ConfigParser do Python."
+
+msgid "crypt"
+msgstr "cifrar"
+
+msgid "custom"
+msgstr "personalizado"
+
+msgid "htpasswd file"
+msgstr "arquivo htpasswd"
+
+#, fuzzy
+msgid "installed"
+msgstr "instalado"
+
+msgid "no valid path given!"
+msgstr "Nenhum caminho válido foi informado!"
+
+#, fuzzy
+msgid "or higher"
+msgstr "ou maior"
+
+msgid "plain"
+msgstr "plano"
+
+#, fuzzy
+msgid "required"
+msgstr "necessário"
+
+msgid "salted SHA-1"
+msgstr "SHA-1 com salto"
+
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Language: pt_BR\n"
+
+msgid "Access Control"
+msgstr "Controle de Acesso"
+
+msgid "Allow all except listed"
+msgstr "Permitir todos, exceto os listados"
+
+msgid "Allow listed only"
+msgstr "Permitir somente os listados"
+
+msgid "Bypassed IP"
+msgstr "Endereços IP Ignorados"
+
+msgid "Connection Timeout"
+msgstr "Tempo limite de conexão"
+
+msgid "Custom"
+msgstr "Personalizado"
+
+msgid "Disabled"
+msgstr "Desabilitado"
+
+msgid "Enable"
+msgstr "Ativar"
+
+msgid "Enabled"
+msgstr "Ativado"
+
+msgid "Encrypt Method"
+msgstr "Método de Cifragem"
+
+msgid "Forwarded IP"
+msgstr "Endereço IP Encaminhado"
+
+msgid "Forwarding Tunnel"
+msgstr "Tunel para Encaminhamento"
+
+msgid "Global Setting"
+msgstr "Opções Globais"
+
+msgid "Ignore List"
+msgstr "Lista de Ignorados"
+
+msgid "LAN"
+msgstr "LAN"
+
+msgid "LAN IP List"
+msgstr "Lista de endereços IP da LAN"
+
+msgid "Local Port"
+msgstr "Porta Local"
+
+msgid "Password"
+msgstr "Senha"
+
+msgid "Relay Mode"
+msgstr "Modo de Retransmissor"
+
+msgid "Server Address"
+msgstr "Endereço do Servidor"
+
+msgid "Server Port"
+msgstr "Porta do servidor"
+
+msgid "ShadowSocks-libev"
+msgstr "ShadowSocks-libev"
+
+msgid "ShadowSocks-libev is not running"
+msgstr "O serviço ShadowSocks-libev está parado"
+
+msgid "ShadowSocks-libev is running"
+msgstr "O serviço ShadowSocks-libev está em execução."
+
+msgid "UDP Forward"
+msgstr "Encaminhamento UDP"
+
+msgid "UDP Local Port"
+msgstr "Porta Local UDP"
+
+msgid "UDP Relay"
+msgstr "Retransmissão UDP"
+
+msgid "WAN"
+msgstr "WAN"
--- /dev/null
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: 2017-01-03 15:06+0900\n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
+"Language-Team: \n"
+"Language: ja\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"X-Poedit-Basepath: .\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+msgid "AO Device ID"
+msgstr "オーディオ出力 デバイスID"
+
+msgid "AO Device Name"
+msgstr "オーディオ出力 デバイス名"
+
+msgid "AO Driver"
+msgstr "オーディオ出力 デバイスドライバー"
+
+msgid "Airport Name"
+msgstr "Airport名"
+
+msgid "Default"
+msgstr "デフォルト"
+
+msgid "Enabled"
+msgstr "有効"
+
+msgid "HW Address"
+msgstr "ハードウェア アドレス"
+
+msgid "Password"
+msgstr "パスワード"
+
+msgid "Port"
+msgstr "ポート"
+
+msgid "Respawn"
+msgstr "リスポーン"
+
+msgid "Shairplay"
+msgstr ""
+
+msgid ""
+"Shairplay is a simple AirPlay server implementation, here you can configure "
+"the settings."
+msgstr ""
+"Shairplayは、シンプルなAirPlay サーバー実装です。ここでは、設定を行うことがで"
+"きます。"
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Language: pt_BR\n"
+"X-Poedit-Bookmarks: -1,5,-1,-1,-1,-1,-1,-1,-1,-1\n"
+
+msgid "AO Device ID"
+msgstr "Identificador do dispositivo AO"
+
+msgid "AO Device Name"
+msgstr "Nome do dispositivo AO"
+
+msgid "AO Driver"
+msgstr "Driver do AO"
+
+msgid "Airport Name"
+msgstr "Nome do Airport"
+
+msgid "Default"
+msgstr "Padrão"
+
+msgid "Enabled"
+msgstr "Habilitado"
+
+msgid "HW Address"
+msgstr "Endereço de Hardware"
+
+msgid "Password"
+msgstr "Senha"
+
+msgid "Port"
+msgstr "Porta"
+
+msgid "Respawn"
+msgstr "Redisparar"
+
+msgid "Shairplay"
+msgstr "Shairplay"
+
+msgid ""
+"Shairplay is a simple AirPlay server implementation, here you can configure "
+"the settings."
+msgstr ""
+"Shairplay é uma implementação simples de um servidor AirPlay. Aqui você pode "
+"configurá-lo."
--- /dev/null
+msgid ""
+msgstr "Content-Type: text/plain; charset=UTF-8"
+
+msgid "AO Device ID"
+msgstr ""
+
+msgid "AO Device Name"
+msgstr ""
+
+msgid "AO Driver"
+msgstr ""
+
+msgid "Airport Name"
+msgstr ""
+
+msgid "Default"
+msgstr ""
+
+msgid "Enabled"
+msgstr ""
+
+msgid "HW Address"
+msgstr ""
+
+msgid "Password"
+msgstr ""
+
+msgid "Port"
+msgstr ""
+
+msgid "Respawn"
+msgstr ""
+
+msgid "Shairplay"
+msgstr ""
+
+msgid ""
+"Shairplay is a simple AirPlay server implementation, here you can configure "
+"the settings."
+msgstr ""
LUCI_TITLE:=Freifunk DHCP-Splash application
LUCI_DEPENDS:=+luci-lib-nixio +tc +kmod-sched +iptables-mod-nat-extra +iptables-mod-ipopt
+define Package/luci-app-splash/conffiles
+/etc/config/luci_splash
+/usr/lib/luci-splash/splashtext.html
+/usr/lib/luci-splash/splashtextinclude.html
+endef
+
include ../../luci.mk
# call BuildPackage - OpenWrt buildroot signature
--- /dev/null
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+LUCI_TITLE:=Squid LuCI Interface
+LUCI_DEPENDS:=+luci-mod-admin-full +squid
+
+PKG_MAINTAINER:=Marko Ratkaj <marko.ratkaj@sartura.hr>
+PKG_LICENSE:=Apache-2.0
+
+include ../../luci.mk
+
+# call BuildPackage - OpenWrt buildroot signature
--- /dev/null
+--[[
+
+LuCI Squid module
+
+Copyright (C) 2015, OpenWrt.org
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Author: Marko Ratkaj <marko.ratkaj@sartura.hr>
+
+]]--
+
+module("luci.controller.squid", package.seeall)
+
+function index()
+ entry({"admin", "services", "squid"}, cbi("squid"), _("Squid"))
+end
--- /dev/null
+--[[
+
+LuCI Squid module
+
+Copyright (C) 2015, OpenWrt.org
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Author: Marko Ratkaj <marko.ratkaj@sartura.hr>
+
+]]--
+
+local fs = require "nixio.fs"
+local sys = require "luci.sys"
+require "ubus"
+
+m = Map("squid", translate("Squid"))
+m.on_after_commit = function() luci.sys.call("/etc/init.d/squid restart") end
+
+s = m:section(TypedSection, "squid")
+s.anonymous = true
+s.addremove = false
+
+s:tab("general", translate("General Settings"))
+
+http_port = s:taboption("general", Value, "http_port", translate("Port"))
+http_port.datatype = "portrange"
+http_port.placeholder = "0-65535"
+
+visible_hostname = s:taboption("general", Value, "visible_hostname", translate("Visible Hostname"))
+visible_hostname.datatype="string"
+visible_hostname.placeholder = "OpenWrt"
+
+coredump_dir = s:taboption("general", Value, "coredump_dir", translate("Coredump files directory"))
+coredump_dir.datatype="string"
+coredump_dir.placeholder = "/tmp/squid"
+
+s:tab("advanced", translate("Advanced Settings"))
+
+squid_config_file = s:taboption("advanced", TextValue, "_data", "")
+squid_config_file.wrap = "off"
+squid_config_file.rows = 25
+squid_config_file.rmempty = false
+
+function squid_config_file.cfgvalue()
+ local uci = require "luci.model.uci".cursor_state()
+ local file = uci:get("squid", "squid", "config_file")
+ if file then
+ return fs.readfile(file) or ""
+ else
+ return ""
+ end
+end
+
+function squid_config_file.write(self, section, value)
+ if value then
+ local uci = require "luci.model.uci".cursor_state()
+ local file = uci:get("squid", "squid", "config_file")
+ fs.writefile(file, value:gsub("\r\n", "\n"))
+ end
+end
+
+return m
+collectd-mod-cpu +collectd-mod-memory \
+collectd-mod-interface +collectd-mod-load +collectd-mod-network
+define Package/luci-app-statistics/conffiles
+/etc/config/luci_statistics
+endef
+
include ../../luci.mk
# call BuildPackage - OpenWrt buildroot signature
enable.default = 1
-- collectd_rrdtool.datadir (DataDir)
-datadir = s:option( Value, "DataDir", translate("Storage directory") )
+datadir = s:option( Value, "DataDir",
+ translate("Storage directory"),
+ translate("Note: as pages are rendered by user 'nobody', the *.rrd files, " ..
+ "the storage directory and all its parent directories need " ..
+ "to be world readable."
+ ))
datadir.default = "/tmp"
datadir.rmempty = true
datadir.optional = true
return {
title = "%H: Disk space usage on %pi",
vlabel = "Bytes",
- per_instance = true,
number_format = "%5.1lf%sB",
data = {
<div style="text-align: center">
<% for i, img in ipairs(images) do %>
- <% if is_index then %><a href="<%=pcdata(images[img])%>"><% end %>
<img src="<%=REQUEST_URI%>?img=<%=img%>&host=<%=current_host%>" />
- <% if is_index then %></a><% end %>
<br />
<% end %>
</div>
msgid "Basic monitoring"
msgstr "Monitoreig bàsic"
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr "Configuració del connector de CPU"
msgid "Email"
msgstr "Adreça electrònica"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "Activa aquest connector"
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr "Monitoritza dispositius"
msgid "Network protocol"
msgstr "Protocol de xarxa"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Número de fils de recol·lecció de dades"
"els ports seleccionats."
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr "Základní sledování"
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr "Nastavení CPU pluginu"
msgid "Email"
msgstr "Email"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "Povolit tento plugin"
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr "Sledovat zařízení"
msgid "Network protocol"
msgstr "Síťový protokol"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Počet vláken pro sběr dat"
"vybraných portech."
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr "Schnittstellen einfach überwachen"
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr "CPU Plugin Konfiguration"
msgid "Email"
msgstr "Email"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "Plugin aktivieren"
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr "Geräte überwachen"
msgid "Network protocol"
msgstr "Netzwerkprotokoll"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Anzahl paralleler Sammelprozesse"
"ausgewählten Ports."
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr ""
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr ""
msgid "Email"
msgstr "Ηλ. Ταχυδρομείο"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr ""
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr ""
msgid "Network protocol"
msgstr ""
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Αριθμός νημάτων για τη συλλογή δεδομένων"
msgstr ""
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr "Basic monitoring"
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr "CPU Plugin Configuration"
msgid "Email"
msgstr "Email"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "Enable this plugin"
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr "Monitor devices"
msgid "Network protocol"
msgstr "Network protocol"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Number of threads for data collection"
"selected ports."
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr "Monitorización básica"
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr "Configuración del plugin de CPU"
msgid "Email"
msgstr "Correo electrónico"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "Activar este plugin"
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr "Dispositivos a monitonizar"
msgid "Network protocol"
msgstr "Protocolo de red"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Número de hilos para recolección de datos"
"puertos seleccionados."
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr "Surveillance de base"
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr "Configuration du greffon sur le CPU"
msgid "Email"
msgstr "Courriel"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "Activer ce greffon"
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr "Périphériques à surveiller"
msgid "Network protocol"
msgstr "Protocole réseau"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Nombre de fils pour la récupération des données"
"de connexions TCP sur les ports spécifiés."
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr ""
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr ""
msgid "Email"
msgstr ""
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr ""
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr ""
msgid "Network protocol"
msgstr ""
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr ""
msgstr ""
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr "Általános figyelés"
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr "CPU bővítmény beállítása"
msgid "Email"
msgstr "E-mail"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "Bővítmény engedélyezése"
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr "Eszközök figyelése"
msgid "Network protocol"
msgstr "Hálózati protokoll"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Az adatgyűjtő szálak száma"
"információkat."
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr ""
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr ""
msgid "Email"
msgstr ""
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "Abilita questo plugin"
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr ""
msgid "Network protocol"
msgstr ""
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr ""
msgstr ""
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-04-20 08:55+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
+"PO-Revision-Date: 2017-01-24 15:08+0900\n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
"Language: ja\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
+"X-Generator: Poedit 1.8.11\n"
+"Language-Team: \n"
msgid "Action (target)"
-msgstr ""
+msgstr "アクション（対象）"
msgid "Add command for reading values"
-msgstr ""
+msgstr "値読み取りコマンドの追加"
msgid "Add matching rule"
-msgstr ""
+msgstr "マッチング規則の追加"
msgid "Add multiple hosts separated by space."
-msgstr ""
+msgstr "スペースで区切られた複数のホストを追加します。"
msgid "Add notification command"
-msgstr ""
+msgstr "通知コマンドの追加"
msgid "Aggregate number of connected users"
-msgstr ""
+msgstr "接続ユーザー数の総計"
msgid "Base Directory"
msgstr "ベース・ディレクトリ"
msgid "Basic monitoring"
-msgstr ""
+msgstr "基本モニタリング"
+
+msgid "CPU Frequency"
+msgstr "CPU 周波数"
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr "CPU 周波数プラグイン設定"
msgid "CPU Plugin Configuration"
-msgstr ""
+msgstr "CPU プラグイン設定"
msgid "CSV Output"
-msgstr ""
+msgstr "CSV 出力"
msgid "CSV Plugin Configuration"
msgstr "CSV プラグイン設定"
msgid "Cache collected data for"
-msgstr ""
+msgstr "収集されたデータをキャッシュする"
msgid "Cache flush interval"
msgstr ""
msgid "Chain"
-msgstr ""
+msgstr "チェイン"
msgid "CollectLinks"
msgstr ""
"different plugins. On this page you can change general settings for the "
"collectd daemon."
msgstr ""
+"Collectd は、様々なソースから別々のプラグインを通してデータを収集する軽量デー"
+"モンです。"
msgid "Conntrack"
-msgstr ""
+msgstr "Conntrack"
msgid "Conntrack Plugin Configuration"
-msgstr ""
+msgstr "Conntrack プラグイン設定"
msgid "DF Plugin Configuration"
msgstr "DF プラグイン設定"
msgstr "DNS"
msgid "DNS Plugin Configuration"
-msgstr ""
+msgstr "DNS プラグイン設定"
msgid "Data collection interval"
msgstr "データの収集間隔"
msgstr "データベース定義ファイル"
msgid "Destination ip range"
-msgstr ""
+msgstr "対象IPの範囲"
msgid "Directory for collectd plugins"
msgstr "collectd プラグインディレクトリ"
msgstr "ディスクプラグイン設定"
msgid "Disk Space Usage"
-msgstr ""
+msgstr "ディスクスペース使用量"
msgid "Disk Usage"
-msgstr ""
+msgstr "ディスクの使用"
msgid "Display Host »"
-msgstr ""
+msgstr "ホストを表示 »"
msgid "Display timespan »"
msgstr "時間帯表示 »"
msgid "Email"
msgstr "Eメール"
+msgid "Empty value = monitor all"
+msgstr "空の値 = 全てをモニターする"
+
msgid "Enable this plugin"
msgstr "プラグイン設定を有効にする"
msgid "Entropy"
-msgstr ""
+msgstr "エントロピー"
msgid "Entropy Plugin Configuration"
-msgstr ""
+msgstr "エントロピー プラグイン設定"
msgid "Exec"
msgstr ""
msgid "Exec Plugin Configuration"
-msgstr ""
+msgstr "Exec プラグイン設定"
msgid "Filter class monitoring"
msgstr ""
msgstr ""
msgid "General plugins"
-msgstr ""
+msgstr "一般プラグイン"
msgid "Generate a separate graph for each logged user"
-msgstr ""
+msgstr "ログインユーザーごとの分離されたグラフを生成します。"
msgid "Graphs"
msgstr "グラフ"
"Here you can define external commands which will be started by collectd in "
"order to read certain values. The values will be read from stdout."
msgstr ""
+"ここでは、特定の値を読み込むためにcollectによって順番に開始される外部コマンド"
+"を設定することができます。値は標準出力から読み込まれます。"
msgid ""
"Here you can define external commands which will be started by collectd when "
"certain threshold values have been reached. The values leading to invokation "
"will be feeded to the the called programs stdin."
msgstr ""
+"ここでは、特定の閾値に到達したときにcollectによって開始される外部コマンドを設"
+"定することができます。呼び出しにつながる値は、呼び出されたプログラムの標準入"
+"力に送られます。"
msgid ""
"Here you can define various criteria by which the monitored iptables rules "
"are selected."
msgstr ""
+"ここでは、モニターするiptable規則が選択される様々な基準を設定することができま"
+"す。"
msgid "Hold Ctrl to select multiple items or to deselect entries."
-msgstr ""
+msgstr "複数の項目を選択または解除するには、Ctrlキーを押したままにします。"
msgid "Host"
-msgstr ""
+msgstr "ホスト"
msgid "Hostname"
msgstr "ホスト名"
msgstr "IRQ プラグイン設定"
msgid "Ignore source addresses"
-msgstr ""
+msgstr "無視するアクセス元アドレス"
msgid "Incoming interface"
-msgstr ""
+msgstr "着信インターフェース"
msgid "Interface Plugin Configuration"
-msgstr ""
+msgstr "インターフェース プラグイン設定"
msgid "Interfaces"
-msgstr ""
+msgstr "インターフェース"
msgid "Interrupts"
-msgstr ""
+msgstr "割込み"
msgid "Interval for pings"
-msgstr ""
+msgstr "ping間隔"
msgid "Iptables Plugin Configuration"
-msgstr ""
+msgstr "Iptables プラグイン設定"
msgid "Leave unselected to automatically determine interfaces to monitor."
msgstr ""
+"モニターするインターフェースを自動的に決定するには、未選択のままにします。"
msgid "Listen host"
-msgstr ""
+msgstr "待ち受けホスト"
msgid "Listen port"
-msgstr ""
+msgstr "待ち受けポート"
msgid "Listener interfaces"
-msgstr ""
+msgstr "待ち受けインターフェース"
msgid "Load Plugin Configuration"
-msgstr ""
+msgstr "負荷プラグイン設定"
msgid ""
"Max values for a period can be used instead of averages when not using 'only "
"average RRAs'"
msgstr ""
+"'RRAの平均のみ' を使用しないとき、平均値の代わりに一定期間の最大値を使用でき"
+"ます。"
msgid "Maximum allowed connections"
-msgstr ""
+msgstr "許可された最大接続数"
msgid "Memory"
-msgstr ""
+msgstr "メモリー"
msgid "Memory Plugin Configuration"
-msgstr ""
+msgstr "メモリー プラグイン設定"
msgid "Monitor all except specified"
msgstr "設定値以外の全てのインターフェースをモニターする"
msgid "Monitor all local listen ports"
-msgstr ""
+msgstr "ローカルの全待ち受けポートをモニターする"
msgid "Monitor all sensors"
+msgstr "全てのセンサーをモニターする"
+
+msgid "Monitor device(s) / thermal zone(s)"
msgstr ""
msgid "Monitor devices"
-msgstr ""
+msgstr "デバイスをモニターする"
msgid "Monitor disks and partitions"
-msgstr ""
+msgstr "ディスクとパーティションをモニターする"
msgid "Monitor filesystem types"
-msgstr ""
+msgstr "ファイルシステム タイプをモニターする"
msgid "Monitor hosts"
-msgstr ""
+msgstr "ホストをモニターする"
msgid "Monitor interfaces"
msgstr "モニターするインターフェースの設定"
msgid "Monitor interrupts"
-msgstr ""
+msgstr "割込みをモニターする"
msgid "Monitor local ports"
-msgstr ""
+msgstr "ローカルのポートをモニターする"
msgid "Monitor mount points"
-msgstr ""
+msgstr "マウントポイントをモニターする"
msgid "Monitor processes"
-msgstr ""
+msgstr "プロセスをモニターする"
msgid "Monitor remote ports"
-msgstr ""
+msgstr "リモートのポートをモニターする"
msgid "Name of the rule"
-msgstr ""
+msgstr "ルール名"
msgid "Netlink"
msgstr "Netlink"
msgid "Network protocol"
msgstr "ネットワークプロトコル"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+"注意: ページは 'nobody' ユーザーとしてレンダリングされます。*.rrd ファイルと"
+"保存先ディレクトリ、およびそのペアレントディレクトリは、worldアクセス権が "
+"\"読み取り可能\" に設定されている必要があります。"
+
msgid "Number of threads for data collection"
msgstr "データ収集用スレッド数"
msgstr "平均値のRRAsのみ作成する"
msgid "OpenVPN"
-msgstr ""
+msgstr "OpenVPN"
msgid "OpenVPN Plugin Configuration"
-msgstr ""
+msgstr "OpenVPN プラグイン設定"
msgid "OpenVPN status files"
-msgstr ""
+msgstr "OpenVPN ステータスファイル"
msgid "Options"
msgstr "オプション"
msgid "Outgoing interface"
-msgstr ""
+msgstr "送信インターフェース"
msgid "Output plugins"
msgstr "出力プラグイン"
msgstr "ポート"
msgid "Processes"
-msgstr ""
+msgstr "プロセス"
msgid "Processes Plugin Configuration"
-msgstr ""
+msgstr "プロセス プラグイン設定"
msgid "Processes to monitor separated by space"
-msgstr ""
+msgstr "スペースで区切られた、モニターするプロセスです。"
msgid "Processor"
-msgstr ""
+msgstr "プロセッサー"
msgid "Qdisc monitoring"
-msgstr ""
+msgstr "Qdisc モニタリング"
msgid "RRD XFiles Factor"
msgstr ""
msgid "RRD heart beat interval"
-msgstr ""
+msgstr "RRD ハートビート間隔"
msgid "RRD step interval"
-msgstr ""
+msgstr "RRD stepインターバル"
msgid "RRDTool"
msgstr "RRDTool"
msgstr "秒"
msgid "Sensor list"
-msgstr ""
+msgstr "センサー一覧"
msgid "Sensors"
-msgstr ""
+msgstr "センサー"
msgid "Sensors Plugin Configuration"
-msgstr ""
+msgstr "センサー プラグイン設定"
msgid "Server host"
-msgstr ""
+msgstr "サーバー ホスト"
msgid "Server port"
-msgstr ""
+msgstr "サーバー ポート"
msgid "Setup"
-msgstr ""
+msgstr "設定"
msgid "Shaping class monitoring"
msgstr ""
msgid "Show max values instead of averages"
-msgstr ""
+msgstr "平均値の代わりに最大値を表示する"
msgid "Socket file"
-msgstr ""
+msgstr "ソケット ファイル"
msgid "Socket group"
-msgstr ""
+msgstr "ソケット グループ"
msgid "Socket permissions"
-msgstr ""
+msgstr "ソケット パーミッション"
msgid "Source ip range"
-msgstr ""
+msgstr "ソースIPの範囲"
msgid "Specifies what information to collect about links."
-msgstr ""
+msgstr "リンクについて、どのような情報を収集するか設定します。"
msgid "Specifies what information to collect about routes."
-msgstr ""
+msgstr "ルートについて、どのような情報を収集するか設定します。"
msgid "Specifies what information to collect about the global topology."
msgstr ""
msgstr ""
msgid "Statistics"
-msgstr ""
+msgstr "統計"
msgid "Storage directory"
msgstr "保存先ディレクトリ"
msgid "Storage directory for the csv files"
-msgstr ""
+msgstr "CSVファイルの保存先ディレクトリ"
msgid "Store data values as rates instead of absolute values"
-msgstr ""
+msgstr "データ値を絶対値の代わりにレートとして保存します。"
msgid "Stored timespans"
-msgstr ""
+msgstr "保存する期間の範囲"
msgid "System Load"
-msgstr ""
+msgstr "システム負荷"
msgid "TCP Connections"
-msgstr ""
+msgstr "TCP 接続"
msgid "TCPConns Plugin Configuration"
-msgstr ""
+msgstr "TCP接続プラグイン設定"
msgid "TTL for network packets"
-msgstr ""
+msgstr "ネットワークパケットのTTL"
msgid "TTL for ping packets"
-msgstr ""
+msgstr "pingパケットのTTL"
msgid "Table"
-msgstr ""
+msgstr "テーブル"
msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
+msgstr "NUT プラグインは、無停電電源装置についての情報を読み取ります。"
msgid ""
"The OLSRd plugin reads information about meshed networks from the txtinfo "
"The OpenVPN plugin gathers information about the current vpn connection "
"status."
msgstr ""
+"OpenVPN プラグインは、現在のVPN接続ステータスについての情報を収集します。"
msgid ""
"The conntrack plugin collects statistics about the number of tracked "
"connections."
-msgstr ""
+msgstr "Conntrack プラグインは、追跡された接続の数についての統計を収集します。"
msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
+msgstr "CPU プラグインは、プロセッサー使用についての基本的な統計を収集します。"
msgid ""
"The csv plugin stores collected data in csv file format for further "
"processing by external programs."
msgstr ""
+"CSV プラグインは、外部プログラムがさらに利用するために、収集されたデータをCSV"
+"ファイル形式で保存します。"
msgid ""
"The df plugin collects statistics about the disk space usage on different "
"devices, mount points or filesystem types."
msgstr ""
+"df プラグインは、個別のデバイスまたはマウントポイント、ファイルシステム形式の"
+"ディスク使用量についての統計を収集します。"
msgid ""
"The disk plugin collects detailled usage statistics for selected partitions "
"or whole disks."
msgstr ""
+"ディスク プラグインは、選択されたパーティションまたはディスク全体の詳細な使用"
+"統計を収集します。"
msgid ""
"The dns plugin collects detailled statistics about dns related traffic on "
"selected interfaces."
msgstr ""
+"DNS プラグインは、選択されたインターフェースでのDNSに関連したトラフィックにつ"
+"いての詳細な統計を収集します。"
msgid ""
"The email plugin creates a unix socket which can be used to transmit email-"
"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
"be used in other ways as well."
msgstr ""
+"Eメール プラグインは、実行中のcollectd デーモンへの電子メール統計の送信に利用"
+"可能なUNIX ソケットを作成するプラグインです。このプラグインは、メール、"
+"SpamAssasin、プラグイン、Collectdを一緒に使うことを主に意図していますが、ほか"
+"の方法にも同様に使用することができます。"
msgid "The entropy plugin collects statistics about the available entropy."
msgstr ""
+"エントロピー プラグインは、利用可能なエントロピーについての統計を収集します。"
msgid ""
"The exec plugin starts external commands to read values from or to notify "
"external processes when certain threshold values have been reached."
msgstr ""
+"Exec プラグインは、特定の閾値に到達したときに外部プロセスから値の読み込み、も"
+"しくは外部プロセスへ通知する外部コマンドを開始します。"
msgid ""
"The interface plugin collects traffic statistics on selected interfaces."
"The iptables plugin will monitor selected firewall rules and collect "
"informations about processed bytes and packets per rule."
msgstr ""
+"iptables プラグインは、選択されたファイアウォール規をモニターし、規則ごとの処"
+"理されたバイト数とパケット数についての情報を収集します。"
msgid ""
"The irq plugin will monitor the rate of issues per second for each selected "
"interrupt. If no interrupt is selected then all interrupts are monitored."
msgstr ""
+"IRQ プラグインは、選択された割り込みごとに1秒当たりの発行レートをモニターしま"
+"す。選択された割り込みが無い場合、すべての割り込みがモニターされます。"
msgid ""
"The iwinfo plugin collects statistics about wireless signal strength, noise "
msgstr "負荷プラグインは、システム負荷の統計情報を収集します。"
msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
+msgstr "メモリー プラグインは、メモリー使用についての統計を収集します。"
msgid ""
"The netlink plugin collects extended informations like qdisc-, class- and "
"filter-statistics for selected interfaces."
msgstr ""
+"Netlink プラグインは、選択されたインターフェースの qdisc- や class- 、filter-"
+"statistics のような拡張的な情報を収集します。"
msgid ""
"The network plugin provides network based communication between different "
"client mode locally collected data is transferred to a collectd server "
"instance, in server mode the local instance receives data from other hosts."
msgstr ""
+"ネットワークプラグインは、異なるcollectd間のネットワークベースの通信を提供し"
+"ます。collectdは、クライアントモードとサーバーモードの両方で動作することがで"
+"きます。クライアントモードでは、ローカルの収集データはcollectdサーバーに転送"
+"され、サーバーモードではローカルのインスタンスは他のホストからデータを受信し"
+"ます。"
msgid ""
"The ping plugin will send icmp echo replies to selected hosts and measure "
"the roundtrip time for each host."
msgstr ""
+"ping プラグインは、ICMP Echo Replyを選択されたホストに送信し、各ホストとの往"
+"復時間を計測します。"
msgid ""
"The processes plugin collects informations like cpu time, page faults and "
"memory usage of selected processes."
msgstr ""
+"プロセス プラグインは、選択されたプロセスのCPU時間やページフォルト、メモリー"
+"使用率などの情報を収集します。"
msgid ""
"The rrdtool plugin stores the collected data in rrd database files, the "
"values will result in a very high memory consumption in the temporary "
"directory. This can render the device unusable!</strong>"
msgstr ""
+"rrdtool プラグインは、収集したデータをrrd データベースファイルに保存します。"
+"これが統計図の基礎です。<br /><br /><strong>警告: 間違った値を設定すると、一"
+"時的なディレクトリによってメモリー消費量が非常に高くなります。これはデバイス"
+"を使用不能にする可能性があります！</strong>"
msgid ""
"The sensors plugin uses the Linux Sensors framework to gather environmental "
"statistics."
msgstr ""
+"センサー プラグインは、環境統計の収集に Linux センサーフレームワークを使用し"
+"ます。"
msgid ""
"The splash leases plugin uses libuci to collect statistics about splash "
"to gather data and <a href=\"http://oss.oetiker.ch/rrdtool/\">RRDtool</a> to "
"render diagram images."
msgstr ""
+"statistics パッケージは、データの収集に<a href=\"https://collectd.org/"
+"\">Collectd</a>を、統計図のレンダリングに<a href=\"http://oss.oetiker.ch/"
+"rrdtool/\">RRDtool</a>を使用します。"
msgid ""
"The tcpconns plugin collects informations about open tcp connections on "
"selected ports."
msgstr ""
+"TCP接続プラグインは、選択されたポートにおいてオープンなTCP接続についての情報"
+"を収集します。"
+
+msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr "サーマル プラグインは、システムの温度をモニターします。"
msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
+"unixsock プラグインは、実行中のcollectd インスタンスから収集データの読み取り"
+"に使用可能なUNIX ソケットを作成します。"
msgid "The uptime plugin collects statistics about the uptime of the system."
+msgstr "稼働時間 プラグインは、システムの稼働時間についての統計を収集します。"
+
+msgid "Thermal"
+msgstr "サーマル"
+
+msgid "Thermal Plugin Configuration"
+msgstr "サーマル プラグイン設定"
+
+msgid "This plugin collects statistics about the processor frequency scaling."
msgstr ""
+"このプラグインは、プロセッサー周波数スケーリングについての統計を収集します。"
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgstr ""
+"このセクションでは、collectdが着信接続を待ち受けるインターフェースを設定しま"
+"す。"
msgid ""
"This section defines to which servers the locally collected data is sent to."
msgstr ""
+"このセクションでは、ローカルに収集されたデータを送信するサーバーを設定しま"
+"す。"
msgid "Try to lookup fully qualified hostname"
msgstr ""
msgid "UPS"
-msgstr ""
+msgstr "UPS"
msgid "UPS Plugin Configuration"
-msgstr ""
+msgstr "UPS プラグイン設定"
msgid "UPS name in NUT ups@host format"
-msgstr ""
+msgstr "ups@host 形式のNUT内のUPS名"
msgid "UnixSock"
-msgstr ""
+msgstr "UnixSock"
msgid "Unixsock Plugin Configuration"
-msgstr ""
+msgstr "Unixsock プラグイン設定"
msgid "Uptime"
-msgstr ""
+msgstr "稼働時間"
msgid "Uptime Plugin Configuration"
-msgstr ""
+msgstr "稼働時間プラグイン設定"
msgid "Use improved naming schema"
msgstr ""
msgstr "使用するPIDファイルの保存場所"
msgid "User"
-msgstr ""
+msgstr "ユーザー"
msgid "Verbose monitoring"
-msgstr ""
+msgstr "詳細モニタリング"
msgid "Wireless"
-msgstr ""
+msgstr "無線"
msgid "Wireless iwinfo Plugin Configuration"
msgstr "無線LAN iwinfo プラグイン設定"
msgid ""
"You can install additional collectd-mod-* plugins to enable more statistics."
msgstr ""
+"追加の collectd-mod-* プラグインをインストールすることで、より多くの統計を有"
+"効にできます。"
msgid "e.g. br-ff"
-msgstr ""
+msgstr "例: br-ff"
msgid "e.g. br-lan"
-msgstr ""
+msgstr "例: br-lan"
msgid "e.g. reject-with tcp-reset"
-msgstr ""
+msgstr "例: reject-with tcp-reset"
msgid "max. 16 chars"
-msgstr ""
+msgstr "最大16文字"
msgid "reduces rrd size"
msgstr "rrdファイルのサイズを小さくします。"
msgstr ""
msgid "server interfaces"
-msgstr ""
+msgstr "サーバー インターフェース"
#~ msgid "Collectd"
#~ msgstr "Collectd"
msgid "Basic monitoring"
msgstr ""
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr ""
msgid "Email"
msgstr ""
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr ""
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr ""
msgid "Network protocol"
msgstr ""
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr ""
msgstr ""
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr "Enkel overvåking"
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr "CPU plugin konfigurasjon"
msgid "Email"
msgstr "Epost"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "Aktiver denne plugin"
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr "Overvåk enheter"
msgid "Network protocol"
msgstr "Nettverks protokoll"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Antall tråder for datainnsamling"
"porter."
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr "Podstawowy monitoring"
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr "Konfiguracja CPU"
msgid "Email"
msgstr "E-mail"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "Włącz tę wtyczkę"
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr "Monitoruj urządzenia"
msgid "Network protocol"
msgstr "Protokoły sieciowe"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Liczba wątków do zbierania danych"
"wybranych portów."
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2014-03-15 22:12+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
+"PO-Revision-Date: 2017-02-22 18:27-0300\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
"Language: pt_BR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
+"Language-Team: \n"
msgid "Action (target)"
msgstr "Ação (destino)"
msgstr "Adicionar o comando de notificação"
msgid "Aggregate number of connected users"
-msgstr ""
+msgstr "Numero agregado de usuários conectados"
msgid "Base Directory"
msgstr "Diretório Base"
msgid "Basic monitoring"
msgstr "Monitoramento básico"
+msgid "CPU Frequency"
+msgstr "Frequência da CPU"
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr "Configuração do Plugin da Frequência da CPU"
+
msgid "CPU Plugin Configuration"
msgstr "Configuração do plugin CPU"
msgid "Email"
msgstr "Email"
+msgid "Empty value = monitor all"
+msgstr "Valor vazio = monitore todos"
+
msgid "Enable this plugin"
msgstr "Habilitar este plugin"
msgid "Entropy"
-msgstr ""
+msgstr "Entropia"
msgid "Entropy Plugin Configuration"
-msgstr ""
+msgstr "Configuração do Plugin de Entropia"
msgid "Exec"
msgstr "Exec"
"Encaminhamento entre o endereço de escuta e os endereços dos servidores"
msgid "Gather compression statistics"
-msgstr ""
+msgstr "Obter estatísticas sobre a compressão"
msgid "General plugins"
-msgstr ""
+msgstr "Plugins Gerais"
msgid "Generate a separate graph for each logged user"
-msgstr ""
+msgstr "Gerar um gráfico separado para cada usuário conectado"
msgid "Graphs"
msgstr "Gráficos"
msgid "Hold Ctrl to select multiple items or to deselect entries."
msgstr ""
+"Segure o Ctrl para selecionar múltiplos itens ou para retirar entradas. "
msgid "Host"
msgstr "Equipamento"
"Max values for a period can be used instead of averages when not using 'only "
"average RRAs'"
msgstr ""
+"Valores máximos para um período podem ser usados em vez de médias quando não "
+"estiver usando 'somente RRAs de médias'"
msgid "Maximum allowed connections"
msgstr "Máximo de conexões permitidas"
msgstr "Monitorar todas as portas locais"
msgid "Monitor all sensors"
-msgstr ""
+msgstr "Monitorar todas os sensores"
+
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr "Dispositivo(s) de monitoramento / zona(s) térmica(s)"
msgid "Monitor devices"
msgstr "Monitorar dispositivos"
msgid "Network protocol"
msgstr "Protocolo de rede"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+"Nota: como as páginas são renderizadas pelo usuário 'nobody', os arquivos * ."
+"rrd, o diretório de armazenamento e todos os seus diretórios superiores "
+"precisam ser legíveis a todos."
+
msgid "Number of threads for data collection"
msgstr "Número de threads para o coletor de dados"
msgstr "Somente criar RRAs de média"
msgid "OpenVPN"
-msgstr ""
+msgstr "OpenVPN"
msgid "OpenVPN Plugin Configuration"
-msgstr ""
+msgstr "Configuração do Plugin do OpenVPN"
msgid "OpenVPN status files"
-msgstr ""
+msgstr "Arquivos de estado do OpenVPN"
msgid "Options"
msgstr "Opções"
msgstr "Segundos"
msgid "Sensor list"
-msgstr ""
+msgstr "Lista de sensores"
msgid "Sensors"
-msgstr ""
+msgstr "Sensores"
msgid "Sensors Plugin Configuration"
-msgstr ""
+msgstr "Configuração do Plugin de Sensores"
msgid "Server host"
msgstr "Endereço do servidor"
msgstr "Porta do servidor"
msgid "Setup"
-msgstr ""
+msgstr "Configuração"
msgid "Shaping class monitoring"
msgstr "Monitoramento das Classes de Shaping"
msgid "Show max values instead of averages"
-msgstr ""
+msgstr "Mostrar valores máximos em vez de médias"
msgid "Socket file"
msgstr "Arquivo do socket"
msgstr "Especifica quais informações serão coletadas sobre a topologia global."
msgid "Splash Leases"
-msgstr ""
+msgstr "Concessões do Splash"
msgid "Splash Leases Plugin Configuration"
-msgstr ""
+msgstr "Configuração do Plugin das Concessões do Splash"
msgid "Statistics"
msgstr "Estatística"
"The OpenVPN plugin gathers information about the current vpn connection "
"status."
msgstr ""
+"O plugin OpenVPN reúne informações sobre o status atual da conexão VPN."
msgid ""
"The conntrack plugin collects statistics about the number of tracked "
"Plugin::Collectd mas pode ser utilizado de outras maneiras também."
msgid "The entropy plugin collects statistics about the available entropy."
-msgstr ""
+msgstr "O plugin de entropia coleta estatísticas sobre a entropia disponível."
msgid ""
"The exec plugin starts external commands to read values from or to notify "
"The sensors plugin uses the Linux Sensors framework to gather environmental "
"statistics."
msgstr ""
+"O plugin de sensores usa a estrutura de sensores do Linux para coletar "
+"estatísticas ambientais."
msgid ""
"The splash leases plugin uses libuci to collect statistics about splash "
"leases."
msgstr ""
+"O plug-in de concessões splash usa o libuci para coletar estatísticas sobre "
+"concessões de splash."
msgid ""
"The statistics package uses <a href=\"https://collectd.org/\">Collectd</a> "
"to gather data and <a href=\"http://oss.oetiker.ch/rrdtool/\">RRDtool</a> to "
"render diagram images."
msgstr ""
+"O pacote de estatísticas usa <a href=\"https://collectd.org/\"> Collectd </"
+"a> para coletar dados e <a href=\"http://oss.oetiker.ch/rrdtool/\">RRDtool</"
+"a> para desenhar os gráficos."
msgid ""
"The tcpconns plugin collects informations about open tcp connections on "
"portas selecionadas."
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+"O plugin térmico monitorará a temperatura do sistema. Os dados são "
+"tipicamente lidos de /sys/class/thermal/*/temp ('*' indica o dispositivo "
+"térmico a ser lido, ex:, thermal_zone1)"
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+"O plugin de tempo de atividade coleta estatísticas sobre o tempo de "
+"atividade do sistema."
+
+msgid "Thermal"
+msgstr "Térmico"
+
+msgid "Thermal Plugin Configuration"
+msgstr "Configuração do Plugin Térmico"
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+"Este plugin coleta as estatísticas sobre o escalonamento da frequência do "
+"processador."
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
msgstr "Configuração do plugin Unixsock"
msgid "Uptime"
-msgstr ""
+msgstr "Tempo de atividade"
msgid "Uptime Plugin Configuration"
-msgstr ""
+msgstr "Configuração do Plugin de Tempo de Atividade"
msgid "Use improved naming schema"
-msgstr ""
+msgstr "Use um esquema de nomeação melhorado"
msgid "Used PID file"
msgstr "Arquivo PID usado"
msgid ""
"You can install additional collectd-mod-* plugins to enable more statistics."
msgstr ""
+"Você pode instalar plugins adicionais (collectd-mod-*) para habilitar mais "
+"estatísticas."
msgid "e.g. br-ff"
msgstr "ex: br-ff"
msgid "Basic monitoring"
msgstr "Monitoramento básico"
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr "Configuração do plugin CPU"
msgid "Email"
msgstr "Email"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "Habilitar este plugin"
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr "Monitorar dispositivos"
msgid "Network protocol"
msgstr "Protocolo de rede"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Número de threads para o coletor de dados"
"portas selecionadas."
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr ""
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr "Configurarea pluginului CPU"
msgid "Email"
msgstr "Email"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr ""
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr ""
msgid "Network protocol"
msgstr ""
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Numarul de threaduri pentru colectarea datelor"
msgstr ""
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr "Базовая статистика"
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr "Конфигурация модуля CPU"
msgid "Email"
msgstr "E-mail"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "Включить этот модуль"
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr "Собирать статистику с устройств"
msgid "Network protocol"
msgstr "Сетевой протокол"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Количество потоков сбора данных"
"портах."
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr ""
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr ""
msgid "Email"
msgstr ""
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr ""
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr ""
msgid "Network protocol"
msgstr ""
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr ""
msgstr ""
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr "Standardövervakning"
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr ""
msgid "Email"
msgstr "E-post"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "Aktivera det här insticksprogrammet"
msgid "Monitor all sensors"
msgstr "Övervaka alla sensorer"
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr "Övervaka enheter"
msgid "Network protocol"
msgstr "Nätverksprotokoll"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Antalet trådar för insamling av data"
msgstr ""
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr ""
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr ""
msgid "Email"
msgstr ""
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr ""
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr ""
msgid "Network protocol"
msgstr ""
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr ""
msgstr ""
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr ""
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr ""
msgid "Email"
msgstr ""
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr ""
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr ""
msgid "Network protocol"
msgstr ""
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr ""
msgstr ""
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr ""
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr ""
msgid "Email"
msgstr ""
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr ""
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr ""
msgid "Network protocol"
msgstr "Мережевий протокол"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr ""
msgstr ""
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr "Monitoring căn bản"
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr "Cấu hình Plugin CPU"
msgid "Email"
msgstr "Email"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "Kích hoạt plugin này"
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr "Monitor devices"
msgid "Network protocol"
msgstr "Network protocol"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "Số lượng các chủ đề để thu thập dữ liệu"
"chọn."
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr "基本监控"
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr "CPU插件配置"
msgid "Email"
msgstr "电子邮件"
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr "启用该插件"
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr "监测设备"
msgid "Network protocol"
msgstr "Network协议"
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr "收集程序使用线程数"
msgstr "tcpconns插件，收集选定端口TCP连接信息。"
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr "unixsock插件，创建一个unix套接字可用于读取Collectd实例的收集信息。"
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
msgid "Basic monitoring"
msgstr ""
+msgid "CPU Frequency"
+msgstr ""
+
+msgid "CPU Frequency Plugin Configuration"
+msgstr ""
+
msgid "CPU Plugin Configuration"
msgstr ""
msgid "Email"
msgstr ""
+msgid "Empty value = monitor all"
+msgstr ""
+
msgid "Enable this plugin"
msgstr ""
msgid "Monitor all sensors"
msgstr ""
+msgid "Monitor device(s) / thermal zone(s)"
+msgstr ""
+
msgid "Monitor devices"
msgstr ""
msgid "Network protocol"
msgstr ""
+msgid ""
+"Note: as pages are rendered by user 'nobody', the *.rrd files, the storage "
+"directory and all its parent directories need to be world readable."
+msgstr ""
+
msgid "Number of threads for data collection"
msgstr ""
msgstr ""
msgid ""
+"The thermal plugin will monitor temperature of the system. Data is typically "
+"read from /sys/class/thermal/*/temp ( '*' denotes the thermal device to be "
+"read, e.g. thermal_zone1 )"
+msgstr ""
+
+msgid ""
"The unixsock plugin creates a unix socket which can be used to read "
"collected data from a running collectd instance."
msgstr ""
msgid "The uptime plugin collects statistics about the uptime of the system."
msgstr ""
+msgid "Thermal"
+msgstr ""
+
+msgid "Thermal Plugin Configuration"
+msgstr ""
+
+msgid "This plugin collects statistics about the processor frequency scaling."
+msgstr ""
+
msgid ""
"This section defines on which interfaces collectd will wait for incoming "
"connections."
{ }
},
- madwifi = {
- { "WatchSet" },
- { },
- { "Interfaces", "WatchAdds" }
- },
-
memory = {
{ },
{ },
o.rmempty = false
o.default = 0
-o = s:option(Value, "trm_loop", translate("Loop timeout in seconds for wlan monitoring"),
- translate("Default 30, range 5-60"))
+o = s:option(Value, "trm_maxwait", translate("Max. timeout in seconds for wlan interface reload"),
+ translate("Default 20, range 10-60"))
o.rmempty = false
-o.default = 30
-o.datatype = "range(5,60)"
+o.default = 20
+o.datatype = "range(10,60)"
o = s:option(Value, "trm_maxretry", translate("Max. number of connection retries to an uplink"),
- translate("Default 3, range 0-10. Set to 0 to allow unlimited retries"))
+ translate("Default 3, range 1-10"))
o.rmempty = false
o.default = 3
-o.datatype = "range(0,10)"
+o.datatype = "range(1,10)"
-- Extra options
a.rmempty = true
a.default = a.disabled
-a = e:option(Value, "trm_device", translate("Use only one radio, e.g. 'radio0'"),
- translate("Default: empty = use all radios."))
+a = e:option(Value, "trm_iface", translate("Restrict reload trigger to certain interface(s)"),
+ translate("Space separated list of wwan interfaces that trigger reload action. To disable reload trigger set it to 'false'. Default: empty"))
a.rmempty = true
a.default = ""
a.datatype = "uciname"
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"Language: ja\n"
+
+msgid ""
+"Brief advice: Create a wwan interface, configure it to use dhcp and add it "
+"to the wan zone in firewall. Create the wifi interfaces to be used ('client' "
+"mode, assigned to wwan network, left as disabled). Travelmate will try to "
+"connect to the known wifi client interfaces in the defined order."
+msgstr ""
+"簡単な解説: 予めWWANインターフェースを作成し、DHCPを使用するよう構成してファ"
+"イアウォールのWANゾーンに追加します。また、使用される無線インターフェースを作"
+"成しておきます（\"クライアント\" モード、WWANに割り当て、無効状態）。"
+"Travelmateは、登録されている順序で既知の無線クライアント インターフェースへの"
+"接続を試行します。"
+
+msgid ""
+"Configuration of the Travelmate package to enable travel router "
+"functionality."
+msgstr "トラベル ルータ機能を有効にする、Travelmate パッケージの設定です。"
+
+msgid "Debug logging"
+msgstr "デバッグ ログ"
+
+msgid "Default 20, range 10-60"
+msgstr "既定値 20、範囲 10 - 60"
+
+msgid "Default 3, range 1-10"
+msgstr "既定値 3、範囲 1 - 10"
+
+msgid "Disable this if you want to use iwinfo instead of iw"
+msgstr "iw の代わりに iwinfo を使用したい場合、この設定を無効にします。"
+
+msgid "Enable Travelmate"
+msgstr "Travelmateの有効化"
+
+msgid "Extra options"
+msgstr "拡張オプション"
+
+msgid "Global options"
+msgstr "全般オプション"
+
+msgid "Link to detailed advice"
+msgstr "詳細な解説へのリンク"
+
+msgid "Max. number of connection retries to an uplink"
+msgstr "確立までの接続試行回数"
+
+msgid "Max. timeout in seconds for wlan interface reload"
+msgstr "無線LANインターフェース リロード時の最大待機時間（秒）"
+
+msgid "Restrict reload trigger to certain interface(s)"
+msgstr "リロード トリガを特定のインターフェースに限定する"
+
+msgid ""
+"Space separated list of wwan interfaces that trigger reload action. To "
+"disable reload trigger set it to 'false'. Default: empty"
+msgstr ""
+"リロード動作のトリガとなる、スペースで区切られたWWAN インターフェースのリスト"
+"です。リロードのトリガを無効にするには、'false' を設定します。既定値:（空）"
+
+msgid "Travelmate"
+msgstr "Travelmate"
+
+msgid "Use iw for scanning"
+msgstr "スキャンに iw を使用する"
+
+#~ msgid "Default 3, range 0-10. Set to 0 to allow unlimited retries"
+#~ msgstr "既定値 3、範囲 0 - 10。再試行回数を制限しない場合、0 に設定します。"
+
+#~ msgid "Default 30, range 5-60"
+#~ msgstr "既定値 30、範囲 5 - 60"
+
+#~ msgid "Default: empty = use all radios."
+#~ msgstr "デフォルト:（空）= 全ての無線を使用"
+
+#~ msgid "Loop timeout in seconds for wlan monitoring"
+#~ msgstr "無線LAN モニターのループ タイムアウト（秒）"
+
+#~ msgid "Use only one radio, e.g. 'radio0'"
+#~ msgstr "単一の無線のみ使用する 例: 'radio0'"
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Language: pt_BR\n"
+
+msgid ""
+"Brief advice: Create a wwan interface, configure it to use dhcp and add it "
+"to the wan zone in firewall. Create the wifi interfaces to be used ('client' "
+"mode, assigned to wwan network, left as disabled). Travelmate will try to "
+"connect to the known wifi client interfaces in the defined order."
+msgstr ""
+"Breve conselho: Crie uma interface wwan, configure-a para usar DHCP e "
+"adicione-a à zona wan no firewall. Crie as interfaces wifi a serem usadas "
+"(modo 'cliente', atribuído à rede wwan, deixado como desativado). O "
+"Travelmate tentará se conectar às interfaces de cliente wifi conhecidas na "
+"ordem definida."
+
+msgid ""
+"Configuration of the Travelmate package to enable travel router "
+"functionality."
+msgstr ""
+"Configuração do pacote Travelmate para permitir a funcionalidade de roteador "
+"de viagem."
+
+msgid "Debug logging"
+msgstr "Registros(log) para depuração"
+
+msgid "Default 20, range 10-60"
+msgstr "Padrão 20, faixa 10-60"
+
+msgid "Default 3, range 1-10"
+msgstr "Padrão 3, faixa 1-10"
+
+msgid "Disable this if you want to use iwinfo instead of iw"
+msgstr "Desabilite isto se você quer usar o iwinfo ao invés do iw"
+
+msgid "Enable Travelmate"
+msgstr "Habilitar o Travelmate"
+
+msgid "Extra options"
+msgstr "Opções adicionais"
+
+msgid "Global options"
+msgstr "Opções Globais"
+
+msgid "Link to detailed advice"
+msgstr "Endereço para conselhos detalhados"
+
+msgid "Max. number of connection retries to an uplink"
+msgstr "Máximo número de tentativas de conexão para um enlace"
+
+msgid "Max. timeout in seconds for wlan interface reload"
+msgstr "Tempo limite máximo em segundos para recarregar a interface wlan"
+
+msgid "Restrict reload trigger to certain interface(s)"
+msgstr "Restringir o gatilho de recarga para somente alguma(s) interface(s)"
+
+msgid ""
+"Space separated list of wwan interfaces that trigger reload action. To "
+"disable reload trigger set it to 'false'. Default: empty"
+msgstr ""
+"Lista separada por espaços de interfaces wwan que acionam a ação de recarga. "
+"Para desabilitar o gatilho de recarga, defina-o como 'false'. Padrão: vazio"
+
+msgid "Travelmate"
+msgstr "Travelmate"
+
+msgid "Use iw for scanning"
+msgstr "Use o iw para escaneamento"
msgid "Debug logging"
msgstr ""
-msgid "Default 3, range 0-10. Set to 0 to allow unlimited retries"
+msgid "Default 20, range 10-60"
msgstr ""
-msgid "Default 30, range 5-60"
-msgstr ""
-
-msgid "Default: empty = use all radios."
+msgid "Default 3, range 1-10"
msgstr ""
msgid "Disable this if you want to use iwinfo instead of iw"
msgid "Link to detailed advice"
msgstr ""
-msgid "Loop timeout in seconds for wlan monitoring"
+msgid "Max. number of connection retries to an uplink"
msgstr ""
-msgid "Max. number of connection retries to an uplink"
+msgid "Max. timeout in seconds for wlan interface reload"
msgstr ""
-msgid "Travelmate"
+msgid "Restrict reload trigger to certain interface(s)"
msgstr ""
-msgid "Use iw for scanning"
+msgid ""
+"Space separated list of wwan interfaces that trigger reload action. To "
+"disable reload trigger set it to 'false'. Default: empty"
msgstr ""
-msgid "Use only one radio, e.g. 'radio0'"
+msgid "Travelmate"
+msgstr ""
+
+msgid "Use iw for scanning"
msgstr ""
--- /dev/null
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: 2017-01-01 18:11+0900\n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
+"Language-Team: \n"
+"Language: ja\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"X-Poedit-Basepath: .\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+msgid ""
+"(/old/path=/new/path) or (just /old/path which becomes /cgi-prefix/old/path)"
+msgstr ""
+"(/old/path=/new/path) または (just /old/path which becomes /cgi-prefix/old/"
+"path)"
+
+msgid "404 Error"
+msgstr "404 エラー"
+
+msgid "A lightweight single-threaded HTTP(S) server"
+msgstr "軽量なシングル スレッド HTTP(S) サーバーです。"
+
+msgid "Advanced Settings"
+msgstr "詳細設定"
+
+msgid "Aliases"
+msgstr "エイリアス"
+
+msgid "Base directory for files to be served"
+msgstr "サーバーがホストするファイルのベースディレクトリです。"
+
+msgid "Bind to specific interface:port (by specifying interface address"
+msgstr ""
+"インターフェースのアドレスを使用して、特定のインターフェースとポートに関連付"
+"けます。"
+
+msgid "CGI filetype handler"
+msgstr "CGIファイル形式 ハンドラー"
+
+msgid "CGI is disabled if not present."
+msgstr "指定しない場合、CGIは無効になります。"
+
+msgid "Config file (e.g. for credentials for Basic Auth)"
+msgstr "設定ファイル（例: 基本認証用の資格情報）"
+
+msgid "Connection reuse"
+msgstr "接続の再使用"
+
+msgid "Country"
+msgstr "国"
+
+msgid "Disable JSON-RPC authorization via ubus session API"
+msgstr "ubus セッションAPI経由のJSON-RPC認証を無効にする"
+
+msgid "Do not follow symlinks outside document root"
+msgstr "ドキュメント ルート外へのシンボリックリンクを追随しない"
+
+msgid "Do not generate directory listings."
+msgstr "ディレクトリの待ち受けを生成しない"
+
+msgid "Document root"
+msgstr "ドキュメント ルート"
+
+msgid "E.g specify with index.html and index.php when using PHP"
+msgstr "index.html や、PHPを使用しているときは index.php を設定します。"
+
+msgid "Embedded Lua interpreter is disabled if not present."
+msgstr "指定しない場合、組込みLua インタープリタは無効になります。"
+
+msgid "Enable JSON-RPC Cross-Origin Resource Support"
+msgstr ""
+
+msgid "For settings primarily geared to serving more than the web UI"
+msgstr "主に、Web UI以上のものを提供することを対象とした設定です。"
+
+msgid "Full Web Server Settings"
+msgstr "完全なWebサーバー設定"
+
+msgid "Full real path to handler for Lua scripts"
+msgstr "Lua スクリプトへの絶対パス"
+
+msgid "General Settings"
+msgstr "一般設定"
+
+msgid "HTTP listeners (address:port)"
+msgstr "HTTP 待ち受け（アドレス:ポート）"
+
+msgid "HTTPS Certificate (DER Encoded)"
+msgstr "HTTPS 証明書（DER エンコード）"
+
+msgid "HTTPS Private Key (DER Encoded)"
+msgstr "HTTPS 秘密鍵（DER エンコード）"
+
+msgid "HTTPS listener (address:port)"
+msgstr "HTTPS 待ち受け（アドレス:ポート）"
+
+msgid "Ignore private IPs on public interface"
+msgstr "公開側インターフェースでのプライベートIPを無視する"
+
+msgid "Index page(s)"
+msgstr "インデックス ページ"
+
+msgid ""
+"Interpreter to associate with file endings ('suffix=handler', e.g. '.php=/"
+"usr/bin/php-cgi')"
+msgstr ""
+"ファイル拡張子に関連付けるインタープリタです。（'suffix=handler'、例: '.php=/"
+"usr/bin/php-cgi')"
+
+msgid "Length of key in bits"
+msgstr "鍵のビット数"
+
+msgid "Location"
+msgstr "場所"
+
+msgid "Maximum number of connections"
+msgstr "最大接続数"
+
+msgid "Maximum number of script requests"
+msgstr "スクリプトの最大リクエスト数"
+
+msgid "Maximum wait time for Lua, CGI, or ubus execution"
+msgstr "LuaやCGI、ubus実行の最大待機時間"
+
+msgid "Maximum wait time for network activity"
+msgstr "ネットワークアクティビティの最大待機時間"
+
+msgid "Override path for ubus socket"
+msgstr "ubus ソケットのパスを上書きする"
+
+msgid "Path prefix for CGI scripts"
+msgstr "CGI スクリプトのパスプレフィクス"
+
+msgid ""
+"Prevent access from private (RFC1918) IPs on an interface if it has an "
+"public IP address"
+msgstr ""
+"グローバル IPアドレスを持つインターフェースでは、プライベート IP (RFC1918) か"
+"らのアクセスをブロックします。"
+
+msgid "Realm for Basic Auth"
+msgstr "基本認証の領域名"
+
+msgid "Redirect all HTTP to HTTPS"
+msgstr "全てのHTTPをHTTPSにリダイレクトする"
+
+msgid "Remove configuration for certificate and key"
+msgstr "証明書と鍵の設定を削除する"
+
+msgid "Remove old certificate and key"
+msgstr "古い証明書と鍵を削除する"
+
+msgid "Server Hostname"
+msgstr "サーバー ホスト名"
+
+msgid ""
+"Settings which are either rarely needed or which affect serving the WebUI"
+msgstr "まれに必要とされる設定、またはWeb UIに影響する設定です。"
+
+msgid "State"
+msgstr "ステータス"
+
+msgid "TCP Keepalive"
+msgstr "TCP キープアライブ"
+
+msgid "This permanently deletes the cert, key, and configuration to use same."
+msgstr ""
+
+msgid "Valid for # of Days"
+msgstr "有効日数"
+
+msgid ""
+"Virtual URL or CGI script to display on status '404 Not Found'. Must begin "
+"with '/'"
+msgstr ""
+
+msgid "Virtual path prefix for Lua scripts"
+msgstr "Lua スクリプトへの仮想パスプレフィクス"
+
+msgid "Virtual path prefix for ubus via JSON-RPC integration"
+msgstr ""
+
+msgid "Will not use HTTP authentication if not present"
+msgstr "指定しない場合、HTTP 認証は使用されません。"
+
+msgid "a.k.a CommonName"
+msgstr "共通名"
+
+msgid "uHTTPd"
+msgstr "uHTTPd"
+
+msgid "uHTTPd Self-signed Certificate Parameters"
+msgstr "uHTTPd 自己署名証明書 パラメーター"
+
+msgid ""
+"uHTTPd will generate a new self-signed certificate using the configuration "
+"shown below."
+msgstr "uHTTPd は、以下に表示した設定で新しい自己署名証明書を生成します。"
+
+msgid "ubus integration is disabled if not present"
+msgstr ""
+
+#~ msgid ""
+#~ "Virtual URL or CGI script to display on status '404 Not Found'. Must "
+#~ "begin with '/'"
+#~ msgstr ""
+#~ "'404 Not Found' ステータスを表示する、仮想URLまたはCGIスクリプトです。'/' "
+#~ "から始まる必要があります。"
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Language: pt_BR\n"
+
+msgid ""
+"(/old/path=/new/path) or (just /old/path which becomes /cgi-prefix/old/path)"
+msgstr ""
+"(/old/path=/new/path) ou (just /old/path que se torna /cgi-prefix/old/path)"
+
+msgid "404 Error"
+msgstr "Erro 404"
+
+msgid "A lightweight single-threaded HTTP(S) server"
+msgstr "Um servidor HTTP(S) leve de únida thread."
+
+msgid "Advanced Settings"
+msgstr "Opções Avançadas"
+
+msgid "Aliases"
+msgstr "Pseudônimos (Aliases)"
+
+msgid "Base directory for files to be served"
+msgstr "Diretório Base para publicar arquivos"
+
+msgid "Bind to specific interface:port (by specifying interface address"
+msgstr ""
+"Escute em uma interface:porta específica (especificando o endereço da "
+"interface"
+
+msgid "CGI filetype handler"
+msgstr "Interpretador de tipo de arquivo CGI"
+
+msgid "CGI is disabled if not present."
+msgstr "O CGI estará desabilitado se não presente."
+
+msgid "Config file (e.g. for credentials for Basic Auth)"
+msgstr "Arquivo de configuração (ex: credenciais para autenticação básica)"
+
+msgid "Connection reuse"
+msgstr "Reutilizar conexão"
+
+msgid "Country"
+msgstr "País"
+
+msgid "Disable JSON-RPC authorization via ubus session API"
+msgstr "Desabilita a autorização JSON-RPC através da API de sessão ubus"
+
+msgid "Do not follow symlinks outside document root"
+msgstr "Não siga ligações simbólicas (symlinks) para fora do documento raiz"
+
+msgid "Do not generate directory listings."
+msgstr "Não gere listagens de diretórios"
+
+msgid "Document root"
+msgstr "Documento Raiz"
+
+msgid "E.g specify with index.html and index.php when using PHP"
+msgstr "Ex: use index.html e index.php quando usar PHP"
+
+msgid "Embedded Lua interpreter is disabled if not present."
+msgstr "O interpretador Lua embutido será desabilitado se não presente."
+
+msgid "Enable JSON-RPC Cross-Origin Resource Support"
+msgstr "Habilite o suporte para recursos JSON-RPC de origem cruzada"
+
+msgid "For settings primarily geared to serving more than the web UI"
+msgstr "Para ajustes envolvidos com mais do que prover a interface web"
+
+msgid "Full Web Server Settings"
+msgstr "Configurações Completas do Servidor Web"
+
+msgid "Full real path to handler for Lua scripts"
+msgstr "Caminho completo para o interpretador de scripts Lua"
+
+msgid "General Settings"
+msgstr "Configurações Gerais"
+
+msgid "HTTP listeners (address:port)"
+msgstr "Escutas do HTTP (endereço:porta)"
+
+msgid "HTTPS Certificate (DER Encoded)"
+msgstr "Certificado do HTTPS (codificado em formato PEM)"
+
+msgid "HTTPS Private Key (DER Encoded)"
+msgstr "Chave Privada do HTTPS (codificado como DER)"
+
+msgid "HTTPS listener (address:port)"
+msgstr "Escuta do HTTPS (endereço:porta)"
+
+msgid "Ignore private IPs on public interface"
+msgstr "Ignore endereços IP privados na interface pública"
+
+msgid "Index page(s)"
+msgstr "Página(s) Índice(s)"
+
+msgid ""
+"Interpreter to associate with file endings ('suffix=handler', e.g. '.php=/"
+"usr/bin/php-cgi')"
+msgstr ""
+"Interpretador para associar com extensões de arquivos "
+"('extensão=interpretador', ex: '.php=/usr/bin/php-cgi')"
+
+msgid "Length of key in bits"
+msgstr "Comprimento da chave em bits"
+
+msgid "Location"
+msgstr "Localização"
+
+msgid "Maximum number of connections"
+msgstr "Número máximo de requisições para script"
+
+msgid "Maximum number of script requests"
+msgstr "Número máximo de requisições para script"
+
+msgid "Maximum wait time for Lua, CGI, or ubus execution"
+msgstr "Tempo máximo de espera para execuções de Lua, CGI ou ubus"
+
+msgid "Maximum wait time for network activity"
+msgstr "Tempo máximo de espera para atividade na rede"
+
+msgid "Override path for ubus socket"
+msgstr "Sobrescrever o caminho do socket ubus"
+
+msgid "Path prefix for CGI scripts"
+msgstr "Prefixo do caminho para scripts CGI"
+
+msgid ""
+"Prevent access from private (RFC1918) IPs on an interface if it has an "
+"public IP address"
+msgstr ""
+"Evite acesso de endereços privados (RFC1918) na interface que tem um "
+"endereço IP público"
+
+msgid "Realm for Basic Auth"
+msgstr "Reino para Autenticação Simples"
+
+msgid "Redirect all HTTP to HTTPS"
+msgstr "Redirecionar todo tráfego HTTP para HTTPS"
+
+msgid "Remove configuration for certificate and key"
+msgstr "Remove a configuração para o certificado e chave"
+
+msgid "Remove old certificate and key"
+msgstr "Remove os certificados e chaves antigas"
+
+msgid "Server Hostname"
+msgstr "Nome do Servidor"
+
+msgid ""
+"Settings which are either rarely needed or which affect serving the WebUI"
+msgstr "Ajustes que são raramente usadas ou que afetam a interface web"
+
+msgid "State"
+msgstr "Estado"
+
+msgid "TCP Keepalive"
+msgstr "Manter conexões TCP abertas (Keepalive)"
+
+msgid "This permanently deletes the cert, key, and configuration to use same."
+msgstr "Isto apaga permanentemente o certificado, a chave e a configuração."
+
+msgid "Valid for # of Days"
+msgstr "Valido por # dias"
+
+msgid ""
+"Virtual URL or CGI script to display on status '404 Not Found'. Must begin "
+"with '/'"
+msgstr ""
+"URL virtual ou script CGI para mostrar quando ocorrer erro '404 Não "
+"Encontrado'. Deve começar com '/'"
+
+msgid "Virtual path prefix for Lua scripts"
+msgstr "Prefixo do caminho virtual para scripts Lua"
+
+msgid "Virtual path prefix for ubus via JSON-RPC integration"
+msgstr "Prefixo do caminho virtual para o ubus através da integração JSON-RPC"
+
+msgid "Will not use HTTP authentication if not present"
+msgstr "Não usar autenticação HTTP se não presente"
+
+msgid "a.k.a CommonName"
+msgstr "também conhecido como Nome Comum"
+
+msgid "uHTTPd"
+msgstr "uHTTPd"
+
+msgid "uHTTPd Self-signed Certificate Parameters"
+msgstr "Parâmetros do Certificado Auto-assinado do uHTTPd"
+
+msgid ""
+"uHTTPd will generate a new self-signed certificate using the configuration "
+"shown below."
+msgstr ""
+"o uHTTPd gerará um certificado auto-assinado usando a configuração mostrada "
+"abaixo."
+
+msgid "ubus integration is disabled if not present"
+msgstr "A integração com o ubus será desativada se não presente"
--- /dev/null
+msgid ""
+msgstr "Content-Type: text/plain; charset=UTF-8"
+
+msgid ""
+"(/old/path=/new/path) or (just /old/path which becomes /cgi-prefix/old/path)"
+msgstr ""
+
+msgid "404 Error"
+msgstr ""
+
+msgid "A lightweight single-threaded HTTP(S) server"
+msgstr ""
+
+msgid "Advanced Settings"
+msgstr ""
+
+msgid "Aliases"
+msgstr ""
+
+msgid "Base directory for files to be served"
+msgstr ""
+
+msgid "Bind to specific interface:port (by specifying interface address"
+msgstr ""
+
+msgid "CGI filetype handler"
+msgstr ""
+
+msgid "CGI is disabled if not present."
+msgstr ""
+
+msgid "Config file (e.g. for credentials for Basic Auth)"
+msgstr ""
+
+msgid "Connection reuse"
+msgstr ""
+
+msgid "Country"
+msgstr ""
+
+msgid "Disable JSON-RPC authorization via ubus session API"
+msgstr ""
+
+msgid "Do not follow symlinks outside document root"
+msgstr ""
+
+msgid "Do not generate directory listings."
+msgstr ""
+
+msgid "Document root"
+msgstr ""
+
+msgid "E.g specify with index.html and index.php when using PHP"
+msgstr ""
+
+msgid "Embedded Lua interpreter is disabled if not present."
+msgstr ""
+
+msgid "Enable JSON-RPC Cross-Origin Resource Support"
+msgstr ""
+
+msgid "For settings primarily geared to serving more than the web UI"
+msgstr ""
+
+msgid "Full Web Server Settings"
+msgstr ""
+
+msgid "Full real path to handler for Lua scripts"
+msgstr ""
+
+msgid "General Settings"
+msgstr ""
+
+msgid "HTTP listeners (address:port)"
+msgstr ""
+
+msgid "HTTPS Certificate (DER Encoded)"
+msgstr ""
+
+msgid "HTTPS Private Key (DER Encoded)"
+msgstr ""
+
+msgid "HTTPS listener (address:port)"
+msgstr ""
+
+msgid "Ignore private IPs on public interface"
+msgstr ""
+
+msgid "Index page(s)"
+msgstr ""
+
+msgid ""
+"Interpreter to associate with file endings ('suffix=handler', e.g. '.php=/"
+"usr/bin/php-cgi')"
+msgstr ""
+
+msgid "Length of key in bits"
+msgstr ""
+
+msgid "Location"
+msgstr ""
+
+msgid "Maximum number of connections"
+msgstr ""
+
+msgid "Maximum number of script requests"
+msgstr ""
+
+msgid "Maximum wait time for Lua, CGI, or ubus execution"
+msgstr ""
+
+msgid "Maximum wait time for network activity"
+msgstr ""
+
+msgid "Override path for ubus socket"
+msgstr ""
+
+msgid "Path prefix for CGI scripts"
+msgstr ""
+
+msgid ""
+"Prevent access from private (RFC1918) IPs on an interface if it has an "
+"public IP address"
+msgstr ""
+
+msgid "Realm for Basic Auth"
+msgstr ""
+
+msgid "Redirect all HTTP to HTTPS"
+msgstr ""
+
+msgid "Remove configuration for certificate and key"
+msgstr ""
+
+msgid "Remove old certificate and key"
+msgstr ""
+
+msgid "Server Hostname"
+msgstr ""
+
+msgid ""
+"Settings which are either rarely needed or which affect serving the WebUI"
+msgstr ""
+
+msgid "State"
+msgstr ""
+
+msgid "TCP Keepalive"
+msgstr ""
+
+msgid "This permanently deletes the cert, key, and configuration to use same."
+msgstr ""
+
+msgid "Valid for # of Days"
+msgstr ""
+
+msgid ""
+"Virtual URL or CGI script to display on status '404 Not Found'. Must begin "
+"with '/'"
+msgstr ""
+
+msgid "Virtual path prefix for Lua scripts"
+msgstr ""
+
+msgid "Virtual path prefix for ubus via JSON-RPC integration"
+msgstr ""
+
+msgid "Will not use HTTP authentication if not present"
+msgstr ""
+
+msgid "a.k.a CommonName"
+msgstr ""
+
+msgid "uHTTPd"
+msgstr ""
+
+msgid "uHTTPd Self-signed Certificate Parameters"
+msgstr ""
+
+msgid ""
+"uHTTPd will generate a new self-signed certificate using the configuration "
+"shown below."
+msgstr ""
+
+msgid "ubus integration is disabled if not present"
+msgstr ""
-- Copyright 2008 Steven Barth <steven@midlink.org>
-- Copyright 2016 Eric Luehrsen <ericluehrsen@hotmail.com>
+-- Copyright 2016 Dan Luedtke <mail@danrl.com>
-- Licensed to the public under the Apache License 2.0.
m = Map("unbound", translate("Recursive DNS"),
translate("Unbound is a validating, recursive, and caching DNS resolver."))
-
-s = m:section(TypedSection, "unbound", translate("Unbound Settings"))
-s.addremove = false
-s.anonymous = true
-s:tab("service", translate("Unbound Service"))
-s:tab("resource", translate("Unbound Resources"))
-s:tab("dnsmasq", translate("Dnsmasq Link"))
+s1 = m:section(TypedSection, "unbound")
+s1.addremove = false
+s1.anonymous = true
+s1:tab("service", translate("Basic Settings"))
+s1:tab("advanced", translate("Advanced Settings"))
+s1:tab("resource", translate("Resource Settings"))
---Enable Unbound
+--LuCI or Not
-e = s:taboption("service", Flag, "enabled", translate("Enable Unbound:"),
+ena = s1:taboption("service", Flag, "enabled", translate("Enable Unbound:"),
translate("Enable the initialization scripts for Unbound"))
-e.rmempty = false
+ena.rmempty = false
-function e.cfgvalue(self, section)
+mcf = s1:taboption("service", Flag, "manual_conf", translate("Manual Conf:"),
+ translate("Skip UCI and use /etc/unbound/unbound.conf"))
+mcf.rmempty = false
+
+function ena.cfgvalue(self, section)
return luci.sys.init.enabled("unbound") and self.enabled or self.disabled
end
-function e.write(self, section, value)
+function ena.write(self, section, value)
if value == "1" then
luci.sys.init.enable("unbound")
luci.sys.call("/etc/init.d/unbound start >/dev/null")
return Flag.write(self, section, value)
end
---Service Tab
-
-mcf = s:taboption("service", Flag, "manual_conf", translate("Manual Conf:"),
- translate("Skip UCI and use /etc/unbound/unbound.conf"))
-mcf.rmempty = false
+--Basic Tab
-lsv = s:taboption("service", Flag, "localservice", translate("Local Service:"),
+lsv = s1:taboption("service", Flag, "localservice", translate("Local Service:"),
translate("Accept queries only from local subnets"))
lsv.rmempty = false
-qry = s:taboption("service", Flag, "query_minimize", translate("Query Minimize:"),
- translate("Break down query components for small added privacy"))
-qry.rmempty = false
-
-rlh = s:taboption("service", Flag, "rebind_localhost", translate("Block Localhost Rebind:"),
+rlh = s1:taboption("service", Flag, "rebind_localhost", translate("Block Localhost Rebind:"),
translate("Prevent upstream response of 127.0.0.0/8"))
rlh.rmempty = false
-rpv = s:taboption("service", Flag, "rebind_protection", translate("Block Private Rebind:"),
+rpv = s1:taboption("service", Flag, "rebind_protection", translate("Block Private Rebind:"),
translate("Prevent upstream response of RFC1918 ranges"))
rpv.rmempty = false
-vld = s:taboption("service", Flag, "validator", translate("Enable DNSSEC:"),
+vld = s1:taboption("service", Flag, "validator", translate("Enable DNSSEC:"),
translate("Enable the DNSSEC validator module"))
vld.rmempty = false
-nvd = s:taboption("service", Flag, "validator_ntp", translate("DNSSEC NTP Fix:"),
+nvd = s1:taboption("service", Flag, "validator_ntp", translate("DNSSEC NTP Fix:"),
translate("Break the loop where DNSSEC needs NTP and NTP needs DNS"))
nvd.rmempty = false
+nvd:depends({ validator = true })
-eds = s:taboption("service", Value, "edns_size", translate("EDNS Size:"),
+eds = s1:taboption("service", Value, "edns_size", translate("EDNS Size:"),
translate("Limit extended DNS packet size"))
eds.datatype = "and(uinteger,min(512),max(4096))"
eds.rmempty = false
-prt = s:taboption("service", Value, "listen_port", translate("Listening Port:"),
+prt = s1:taboption("service", Value, "listen_port", translate("Listening Port:"),
translate("Choose Unbounds listening port"))
prt.datatype = "port"
prt.rmempty = false
-tlm = s:taboption("service", Value, "ttl_min", translate("TTL Minimum:"),
+tlm = s1:taboption("service", Value, "ttl_min", translate("TTL Minimum:"),
translate("Prevent excessively short cache periods"))
tlm.datatype = "and(uinteger,min(0),max(600))"
tlm.rmempty = false
+--Advanced Tab
+
+ctl = s1:taboption("advanced", Flag, "unbound_control", translate("Unbound Control App:"),
+ translate("Enable unecrypted localhost access for unbound-control"))
+ctl.rmempty = false
+
+dlk = s1:taboption("advanced", ListValue, "dhcp_link", translate("DHCP Link:"),
+ translate("Link to supported programs to load DHCP into DNS"))
+dlk:value("none", translate("No Link"))
+dlk:value("dnsmasq", "dnsmasq")
+dlk:value("odhcpd", "odhcpd")
+dlk.rmempty = false
+
+dom = s1:taboption("advanced", Value, "domain", translate("Local Domain:"),
+ translate("Domain suffix for this router and DHCP clients"))
+dom.placeholder = "lan"
+dom:depends({ dhcp_link = "none" })
+dom:depends({ dhcp_link = "odhcpd" })
+
+dty = s1:taboption("advanced", ListValue, "domain_type", translate("Local Domain Type:"),
+ translate("How to treat queries of this local domain"))
+dty:value("deny", translate("Ignored"))
+dty:value("refuse", translate("Refused"))
+dty:value("static", translate("Only Local"))
+dty:value("transparent", translate("Also Forwarded"))
+dty:depends({ dhcp_link = "none" })
+dty:depends({ dhcp_link = "odhcpd" })
+
+lfq = s1:taboption("advanced", ListValue, "add_local_fqdn", translate("LAN DNS:"),
+ translate("How to enter the LAN or local network router in DNS"))
+lfq:value("0", translate("No DNS"))
+lfq:value("1", translate("Hostname, Primary Address"))
+lfq:value("2", translate("Hostname, All Addresses"))
+lfq:value("3", translate("Host FQDN, All Addresses"))
+lfq:value("4", translate("Interface FQDN, All Addresses"))
+lfq:depends({ dhcp_link = "none" })
+lfq:depends({ dhcp_link = "odhcpd" })
+
+wfq = s1:taboption("advanced", ListValue, "add_wan_fqdn", translate("WAN DNS:"),
+ translate("Override the WAN side router entry in DNS"))
+wfq:value("0", translate("Upstream"))
+wfq:value("1", translate("Hostname, Primary Address"))
+wfq:value("2", translate("Hostname, All Addresses"))
+wfq:value("3", translate("Host FQDN, All Addresses"))
+wfq:value("4", translate("Interface FQDN, All Addresses"))
+wfq:depends({ dhcp_link = "none" })
+wfq:depends({ dhcp_link = "odhcpd" })
+
+ctl = s1:taboption("advanced", Flag, "dhcp4_slaac6", translate("DHCPv4 to SLAAC:"),
+ translate("Use DHCPv4 MAC to discover IP6 hosts SLAAC (EUI64)"))
+ctl.rmempty = false
+
+d64 = s1:taboption("advanced", Flag, "dns64", translate("Enable DNS64:"),
+ translate("Enable the DNS64 module"))
+d64.rmempty = false
+
+pfx = s1:taboption("advanced", Value, "dns64_prefix", translate("DNS64 Prefix:"),
+ translate("Prefix for generated DNS64 addresses"))
+pfx.datatype = "ip6addr"
+pfx.placeholder = "64:ff9b::/96"
+pfx.optional = true
+pfx:depends({ dns64 = true })
+
+qry = s1:taboption("advanced", Flag, "query_minimize", translate("Query Minimize:"),
+ translate("Break down query components for limited added privacy"))
+qry.rmempty = false
+
+qrs = s1:taboption("advanced", Flag, "query_min_strict", translate("Strict Minimize:"),
+ translate("Strict version of 'query minimize' but it can break DNS"))
+qrs.rmempty = false
+qrs:depends({ query_minimize = true })
+
+--TODO: dnsmasq needs to not reference resolve-file and get off port 53.
+
--Resource Tuning Tab
-rsn = s:taboption("resource", ListValue, "recursion", translate("Recursion Strength:"),
+pro = s1:taboption("resource", ListValue, "protocol", translate("Recursion Protocol:"),
+ translate("Chose the protocol recursion queries leave on"))
+pro:value("mixed", translate("IP4 and IP6"))
+pro:value("ip6_prefer", translate("IP6 Preferred"))
+pro:value("ip4_only", translate("IP4 Only"))
+pro:value("ip6_only", translate("IP6 Only"))
+pro.rmempty = false
+
+rsn = s1:taboption("resource", ListValue, "recursion", translate("Recursion Strength:"),
translate("Recursion activity affects memory growth and CPU load"))
rsn:value("aggressive", translate("Aggressive"))
rsn:value("default", translate("Default"))
rsn:value("passive", translate("Passive"))
rsn.rmempty = false
-rsc = s:taboption("resource", ListValue, "resource", translate("Memory Resource:"),
+rsc = s1:taboption("resource", ListValue, "resource", translate("Memory Resource:"),
translate("Use menu System/Processes to observe any memory growth"))
rsc:value("large", translate("Large"))
rsc:value("medium", translate("Medium"))
rsc:value("tiny", translate("Tiny"))
rsc.rmempty = false
-age = s:taboption("resource", Value, "root_age", translate("Root DSKEY Age:"),
+ag2 = s1:taboption("resource", Value, "root_age", translate("Root DSKEY Age:"),
translate("Limit days between RFC5011 to reduce flash writes"))
-age.datatype = "and(uinteger,min(1),max(99))"
-age:value("14", "14")
-age:value("28", "28 ("..translate("default")..")")
-age:value("45", "45")
-age:value("90", "90")
-age:value("99", "99 ("..translate("never")..")")
-
---Dnsmasq Link Tab
-
-dld = s:taboption("dnsmasq", Flag, "dnsmasq_link_dns", translate("Link dnsmasq:"),
- translate("Forward queries to dnsmasq for local clients"))
-dld.rmempty = false
-
-dgn = s:taboption("dnsmasq", Flag, "dnsmsaq_gate_name", translate("Local Gateway Name:"),
- translate("Also query dnsmasq for this hosts outbound gateway"))
-dgn.rmempty = false
-
---TODO: Read only repective dnsmasq options and inform user of link requirements.
---TODO: dnsmasq needs to not reference resolve-file and get off port 53.
+ag2.datatype = "and(uinteger,min(1),max(99))"
+ag2:value("14", "14")
+ag2:value("28", "28 ("..translate("default")..")")
+ag2:value("45", "45")
+ag2:value("90", "90")
+ag2:value("99", "99 ("..translate("never")..")")
return m
--- /dev/null
+#!/bin/sh
+
+uci -q batch <<-EOF >/dev/null
+ delete ucitrack.@unbound[-1]
+ add ucitrack unbound
+ set ucitrack.@unbound[-1].init=unbound
+ commit ucitrack
+EOF
+
+rm -f /tmp/luci-indexcache
+[ ! -x /usr/sbin/unbound-control ] && exit 0
+
+uci -q batch <<-EOF >/dev/null
+ set luci.unboundhosts=command
+ set luci.unboundhosts.name='Unbound Local Hosts'
+ set luci.unboundhosts.command='unbound-control -c /var/lib/unbound/unbound.conf list_local_data'
+ set luci.unboundzones=command
+ set luci.unboundzones.name='Unbound Local Zones'
+ set luci.unboundzones.command='unbound-control -c /var/lib/unbound/unbound.conf list_local_zones'
+ commit luci
+EOF
+
+rm -f /tmp/luci-indexcache
+exit 0
+
s:tab("general", translate("General Settings"))
s:tab("advanced", translate("Advanced Settings"))
-e = s:taboption("general", Flag, "_init", translate("Start UPnP and NAT-PMP service"))
+e = s:taboption("general", Flag, "enabled", translate("Start UPnP and NAT-PMP service"))
e.rmempty = false
-function e.cfgvalue(self, section)
- return luci.sys.init.enabled("miniupnpd") and self.enabled or self.disabled
-end
+--function e.cfgvalue(self, section)
+-- return luci.sys.init.enabled("miniupnpd") and self.enabled or self.disabled
+--end
function e.write(self, section, value)
if value == "1" then
- luci.sys.call("/etc/init.d/miniupnpd enable >/dev/null")
luci.sys.call("/etc/init.d/miniupnpd start >/dev/null")
else
luci.sys.call("/etc/init.d/miniupnpd stop >/dev/null")
- luci.sys.call("/etc/init.d/miniupnpd disable >/dev/null")
end
+
+ return Flag.write(self, section, value)
end
s:taboption("general", Flag, "enable_upnp", translate("Enable UPnP functionality")).default = "1"
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2013-10-05 17:27+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
+"PO-Revision-Date: 2016-12-24 19:55+0900\n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
"Language: ja\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
+"Language-Team: \n"
msgid ""
"ACLs specify which external ports may be redirected to which internal "
msgstr "詳細設定"
msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
+msgstr "要求元IPアドレスへの転送のみ、追加を許可します。"
msgid "Announced model number"
msgstr "通知するモデル番号"
msgstr "UPnP リースファイル"
msgid "Universal Plug & Play"
-msgstr "ユニバーサル プラグ & プレイ"
+msgstr "ユニバーサル プラグ & プレイ"
msgid "Uplink"
msgstr "アップリンク"
msgid "Value in KByte/s, informational only"
-msgstr ""
+msgstr "クライアントへの情報提供のみに使用される、KByte/sの値です。"
#~ msgid ""
#~ "UPNP allows clients in the local network to automatically configure the "
#~ "router."
-#~ msgstr "UPnPを使用することで、ローカルネットワーク内のクライアントが自動的にルータを構成することができます。"
+#~ msgstr ""
+#~ "UPnPを使用することで、ローカルネットワーク内のクライアントが自動的にルータ"
+#~ "を構成することができます。"
#~ msgid "enable"
#~ msgstr "有効"
--- /dev/null
+#!/bin/sh
+
+uci -q batch <<-EOF >/dev/null
+ delete ucitrack.@upnpd[-1]
+ add ucitrack upnpd
+ set ucitrack.@upnpd[-1]=miniupnpd
+ commit ucitrack
+EOF
+
+rm -f /tmp/luci-indexcache
+exit 0
--- /dev/null
+# Copyright (c) 2017 Stan Grishin (stangri@melmac.net)
+# This is free software, licensed under the GNU General Public License v3.
+
+include $(TOPDIR)/rules.mk
+
+PKG_LICENSE:=GPL-3.0+
+PKG_MAINTAINER:=Stan Grishin <stangri@melmac.net>
+
+LUCI_TITLE:=VPN Bypass Web UI
+LUCI_DEPENDS:=+vpnbypass
+LUCI_PKGARCH:=all
+PKG_RELEASE:=1
+
+include ../../luci.mk
+
+# call BuildPackage - OpenWrt buildroot signature
--- /dev/null
+module("luci.controller.vpnbypass", package.seeall)
+function index()
+ if not nixio.fs.access("/etc/config/vpnbypass") then
+ return
+ end
+ entry({"admin", "services", "vpnbypass"}, cbi("vpnbypass"), _("VPN Bypass"))
+end
--- /dev/null
+readmeURL = "https://github.com/openwrt/packages/blob/master/net/vpnbypass/files/README.md"
+
+m = Map("vpnbypass", translate("VPN Bypass Settings"))
+s = m:section(NamedSection, "config", "vpnbypass")
+
+-- General options
+e = s:option(Flag, "enabled", translate("Enable/start service"))
+e.rmempty = false
+
+function e.cfgvalue(self, section)
+ return self.map:get(section, "enabled") == "1" and luci.sys.init.enabled("vpnbypass") and self.enabled or self.disabled
+end
+
+function e.write(self, section, value)
+ if value == "1" then
+ luci.sys.call("/etc/init.d/vpnbypass enable >/dev/null")
+ luci.sys.call("/etc/init.d/vpnbypass start >/dev/null")
+ else
+ luci.sys.call("/etc/init.d/vpnbypass stop >/dev/null")
+ end
+ return Flag.write(self, section, value)
+end
+
+-- Local Ports
+p1 = s:option(DynamicList, "localport", translate("Local Ports to Bypass"), translate("Local ports to trigger VPN Bypass"))
+p1.datatype = "portrange"
+-- p1.placeholder = "0-65535"
+p1.addremove = false
+p1.optional = false
+
+-- Remote Ports
+p2 = s:option(DynamicList, "remoteport", translate("Remote Ports to Bypass"), translate("Remote ports to trigger VPN Bypass"))
+p2.datatype = "portrange"
+-- p2.placeholder = "0-65535"
+p2.addremove = false
+p2.optional = false
+
+-- Local Subnets
+r1 = s:option(DynamicList, "localsubnet", translate("Local IP Addresses to Bypass"), translate("Local IP addresses or subnets with direct internet access (outside of the VPN tunnel)"))
+r1.datatype = "ip4addr"
+-- r1.placeholder = luci.ip.new(uci.cursor():get("network", "lan", "ipaddr") .. "/" .. uci.cursor():get("network", "lan", "netmask"))
+r1.addremove = false
+r1.optional = false
+
+-- Remote Subnets
+r2 = s:option(DynamicList, "remotesubnet", translate("Remote IP Addresses to Bypass"), translate("Remote IP addresses or subnets which will be accessed directly (outside of the VPN tunnel)"))
+r2.datatype = "ip4addr"
+-- r2.placeholder = "0.0.0.0/0"
+r2.addremove = false
+r2.optional = false
+
+-- Domains
+d = Map("dhcp")
+s4 = d:section(TypedSection, "dnsmasq")
+s4.anonymous = true
+di = s4:option(DynamicList, "ipset", translate("Domains to Bypass"),
+ translate("Domains to be accessed directly (outside of the VPN tunnel), see ")
+ .. [[<a href="]] .. readmeURL .. [[#bypass-domains-formatsyntax" target="_blank">]]
+ .. translate("README") .. [[</a>]] .. translate(" for syntax"))
+
+return m, d
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Language: pt_BR\n"
+
+msgid "Domains to Bypass"
+msgstr "Domínios para evitar a VPN"
+
+msgid "Domains to be accessed directly (outside of the VPN tunnel), see"
+msgstr ""
+
+msgid "Enable VPN Bypass"
+msgstr "Habilitar o VPN Bypass"
+
+msgid "Local IP Addresses to Bypass"
+msgstr ""
+
+msgid ""
+"Local IP addresses or subnets with direct internet access (outside of the "
+"VPN tunnel)"
+msgstr ""
+
+msgid "Local Ports to Bypass"
+msgstr "Portas locais para evitar a VPN"
+
+msgid "Local ports to trigger VPN Bypass"
+msgstr "Portas locais para disparar o VPN Bypass"
+
+msgid "README"
+msgstr ""
+
+msgid "Remote IP Addresses to Bypass"
+msgstr ""
+
+msgid ""
+"Remote IP addresses or subnets which will be accessed directly (outside of "
+"the VPN tunnel)"
+msgstr ""
+
+msgid "Remote Ports to Bypass"
+msgstr "Portas remotas para evitar a VPN"
+
+msgid "Remote ports to trigger VPN Bypass"
+msgstr "Portas remotas para disparar o VPN Bypass"
+
+msgid "VPN Bypass"
+msgstr "VPN Bypass"
+
+msgid "VPN Bypass Settings"
+msgstr "Configurações do VPN Bypass"
+
+msgid "for syntax"
+msgstr ""
+
+#~ msgid "Configuration of VPN Bypass Settings"
+#~ msgstr "Configurações do VPN Bypass"
+
+#~ msgid "Domains which will be accessed directly (outside of the VPN tunnel)"
+#~ msgstr "Domínios que serão acessados diretamente (fora do túnel VPN)"
+
+#~ msgid "Local IP Subnets to Bypass"
+#~ msgstr "Subredes IP locais para evitar a VPN"
+
+#~ msgid ""
+#~ "Local IP ranges with direct internet access (outside of the VPN tunnel)"
+#~ msgstr ""
+#~ "Faixa de endereços IP locais que terão acesso internet direto (fora do "
+#~ "túnel VPN)"
+
+#~ msgid "Remote IP Subnets to Bypass"
+#~ msgstr "Subredes IP remotas para evitar a VPN"
+
+#~ msgid ""
+#~ "Remote IP ranges which will be accessed directly (outside of the VPN "
+#~ "tunnel)"
+#~ msgstr ""
+#~ "Faixa de endereços IP remotos que serão acessados diretamente (fora do "
+#~ "túnel VPN)"
--- /dev/null
+msgid ""
+msgstr "Content-Type: text/plain; charset=UTF-8"
+
+msgid "Domains to Bypass"
+msgstr ""
+
+msgid "Domains to be accessed directly (outside of the VPN tunnel), see"
+msgstr ""
+
+msgid "Enable/start service"
+msgstr ""
+
+msgid "Local IP Addresses to Bypass"
+msgstr ""
+
+msgid ""
+"Local IP addresses or subnets with direct internet access (outside of the "
+"VPN tunnel)"
+msgstr ""
+
+msgid "Local Ports to Bypass"
+msgstr ""
+
+msgid "Local ports to trigger VPN Bypass"
+msgstr ""
+
+msgid "README"
+msgstr ""
+
+msgid "Remote IP Addresses to Bypass"
+msgstr ""
+
+msgid ""
+"Remote IP addresses or subnets which will be accessed directly (outside of "
+"the VPN tunnel)"
+msgstr ""
+
+msgid "Remote Ports to Bypass"
+msgstr ""
+
+msgid "Remote ports to trigger VPN Bypass"
+msgstr ""
+
+msgid "VPN Bypass"
+msgstr ""
+
+msgid "VPN Bypass Settings"
+msgstr ""
+
+msgid "for syntax"
+msgstr ""
--- /dev/null
+#!/bin/sh
+uci -q batch <<-EOF >/dev/null
+ delete ucitrack.@vpnbypass[-1]
+ add ucitrack vpnbypass
+ set ucitrack.@vpnbypass[-1].init=vpnbypass
+ commit ucitrack
+EOF
+
+rm -f /tmp/luci-indexcache
+exit 0
+
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2014-03-29 23:20+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
+"Project-Id-Version: \n"
+"PO-Revision-Date: 2017-02-20 18:10-0300\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
"Language-Team: none\n"
"Language: pt_BR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
+"POT-Creation-Date: \n"
msgid "Forced reboot delay"
msgstr "Atraso para reinício forçado"
msgid "Watchcat"
msgstr "Watchcat"
-#, fuzzy
msgid ""
"Watchcat allows configuring a periodic reboot when the Internet connection "
"has been lost for a certain period of time."
msgstr ""
-"Watchcat permite que se configure um período para reiniciar e/ou quando a "
+"Watchcat permite a configuração de um período para reiniciar e/ou quando a "
"conexão com à Internet foi perdida por um ser período de tempo."
-#, fuzzy
msgid ""
"When rebooting the system, the watchcat will trigger a soft reboot. Entering "
"a non zero value here will trigger a delayed hard reboot if the soft reboot "
--
-- Author: Nils Koenig <openwrt@newk.it>
-module("luci.controller.wifischedule.wifi_schedule", package.seeall)
+module("luci.controller.wifischedule.wifi_schedule", package.seeall)
+
+local fs = require "nixio.fs"
+local sys = require "luci.sys"
+local template = require "luci.template"
+local i18n = require "luci.i18n"
function index()
- entry({"admin", "wifi_schedule"}, firstchild(), "Wifi Schedule", 60).dependent=false
- entry({"admin", "wifi_schedule", "tab_from_cbi"}, cbi("wifischedule/wifi_schedule"), "Schedule", 1)
- entry({"admin", "wifi_schedule", "wifi_schedule"}, call("wifi_schedule_log"), "View Logfile", 2)
- entry({"admin", "wifi_schedule", "cronjob"}, call("view_crontab"), "View Cron Jobs", 3)
+ if not nixio.fs.access("/etc/config/wifi_schedule") then
+ return
+ end
+ entry({"admin", "services", "wifi_schedule"}, firstchild(), _("Wifi Schedule"), 60).dependent=false
+ entry({"admin", "services", "wifi_schedule", "tab_from_cbi"}, cbi("wifischedule/wifi_schedule"), _("Schedule"), 1)
+ entry({"admin", "services", "wifi_schedule", "wifi_schedule"}, call("wifi_schedule_log"), _("View Logfile"), 2)
+ entry({"admin", "services", "wifi_schedule", "cronjob"}, call("view_crontab"), _("View Cron Jobs"), 3)
end
function wifi_schedule_log()
- local logfile = luci.sys.exec("cat /tmp/log/wifi_schedule.log")
- luci.template.render("wifischedule/file_viewer", {title="Wifi Schedule Logfile", content=logfile})
+ local logfile = fs.readfile("/tmp/log/wifi_schedule.log") or ""
+ template.render("wifischedule/file_viewer",
+ {title = i18n.translate("Wifi Schedule Logfile"), content = logfile})
end
function view_crontab()
- local crontab = luci.sys.exec("cat /etc/crontabs/root")
- luci.template.render("wifischedule/file_viewer", {title="Cron Jobs", content=crontab})
+ local crontab = fs.readfile("/etc/crontabs/root") or ""
+ template.render("wifischedule/file_viewer",
+ {title = i18n.translate("Cron Jobs"), content = crontab})
end
--
-- Author: Nils Koenig <openwrt@newk.it>
-function file_exists(name)
- local f=io.open(name,"r")
- if f~=nil then io.close(f) return true else return false end
-end
-
+local fs = require "nixio.fs"
+local sys = require "luci.sys"
function time_validator(self, value, desc)
if value ~= nil then
-
h_str, m_str = string.match(value, "^(%d%d?):(%d%d?)$")
h = tonumber(h_str)
m = tonumber(m_str)
m <= 59) then
return value
end
- end
- return nil, translate("The value '" .. desc .. "' is invalid")
+ end
+ return nil, translatef("The value %s is invalid", desc)
end
-- -------------------------------------------------------------------------------------------------
-- BEGIN Map
-m = Map("wifi_schedule", translate("Wifi Schedule"), translate("Defines a schedule when to turn on and off wifi."))
+m = Map("wifi_schedule", translate("Wifi Schedule"), translate("Defines a schedule when to turn on and off wifi."))
function m.on_commit(self)
- luci.sys.exec("/usr/bin/wifi_schedule.sh cron")
+ sys.exec("/usr/bin/wifi_schedule.sh cron")
end
-- END Map
-- BEGIN Global Section
-global_section = m:section(TypedSection, "global", "Global Settings")
+global_section = m:section(TypedSection, "global", translate("Global Settings"))
global_section.optional = false
global_section.rmempty = false
global_section.anonymous = true
-- BEGIN Global Enable Checkbox
global_enable = global_section:option(Flag, "enabled", translate("Enable Wifi Schedule"))
-global_enable.optional=false;
-global_enable.rmempty = false;
+global_enable.optional = false
+global_enable.rmempty = false
function global_enable.validate(self, value, global_section)
if value == "1" then
- if ( file_exists("/sbin/wifi") and
- file_exists("/usr/bin/wifi_schedule.sh") )then
+ if ( fs.access("/sbin/wifi") and
+ fs.access("/usr/bin/wifi_schedule.sh") )then
return value
else
return nil, translate("Could not find required /usr/bin/wifi_schedule.sh or /sbin/wifi")
end
-- END Global Enable Checkbox
-
-- BEGIN Global Logging Checkbox
global_logging = global_section:option(Flag, "logging", translate("Enable logging"))
-global_logging.optional=false;
-global_logging.rmempty = false;
+global_logging.optional = false
+global_logging.rmempty = false
global_logging.default = 0
-- END Global Enable Checkbox
-- BEGIN Global Activate WiFi Button
enable_wifi = global_section:option(Button, "enable_wifi", translate("Activate wifi"))
function enable_wifi.write()
- luci.sys.exec("/usr/bin/wifi_schedule.sh start manual")
+ sys.exec("/usr/bin/wifi_schedule.sh start manual")
end
-- END Global Activate Wifi Button
-- BEGIN Global Disable WiFi Gracefully Button
disable_wifi_gracefully = global_section:option(Button, "disable_wifi_gracefully", translate("Disable wifi gracefully"))
function disable_wifi_gracefully.write()
- luci.sys.exec("/usr/bin/wifi_schedule.sh stop manual")
+ sys.exec("/usr/bin/wifi_schedule.sh stop manual")
end
--- END Global Disable Wifi Gracefully Button
+-- END Global Disable Wifi Gracefully Button
-- BEGIN Disable WiFi Forced Button
disable_wifi_forced = global_section:option(Button, "disable_wifi_forced", translate("Disabled wifi forced"))
function disable_wifi_forced.write()
- luci.sys.exec("/usr/bin/wifi_schedule.sh forcestop manual")
+ sys.exec("/usr/bin/wifi_schedule.sh forcestop manual")
end
-- END Global Disable WiFi Forced Button
-- BEGIN Global Unload Modules Checkbox
global_unload_modules = global_section:option(Flag, "unload_modules", translate("Unload Modules (experimental; saves more power)"))
-global_unload_modules.optional = false;
-global_unload_modules.rmempty = false;
+global_unload_modules.optional = false
+global_unload_modules.rmempty = false
global_unload_modules.default = 0
-- END Global Unload Modules Checkbox
-- BEGIN Modules
modules = global_section:option(TextValue, "modules", "")
modules:depends("unload_modules", global_unload_modules.enabled);
-modules.wrap = "off"
-modules.rows = 10
+modules.wrap = "off"
+modules.rows = 10
function modules.cfgvalue(self, section)
- mod=uci.get("wifi_schedule", section, "modules")
+ mod = uci.get("wifi_schedule", section, "modules")
if mod == nil then
- mod=""
+ mod = ""
end
return mod:gsub(" ", "\r\n")
end
end
-- END Modules
--- BEGIN Determine Modules
+-- BEGIN Determine Modules
determine_modules = global_section:option(Button, "determine_modules", translate("Determine Modules Automatically"))
determine_modules:depends("unload_modules", global_unload_modules.enabled);
function determine_modules.write(self, section)
- output = luci.sys.exec("/usr/bin/wifi_schedule.sh getmodules")
+ output = sys.exec("/usr/bin/wifi_schedule.sh getmodules")
modules:write(section, output)
end
-- END Determine Modules
-
-- BEGIN Section
-d = m:section(TypedSection, "entry", "Schedule events")
-d.addremove = true
+d = m:section(TypedSection, "entry", translate("Schedule events"))
+d.addremove = true
--d.anonymous = true
-- END Section
-- BEGIN Enable Checkbox
c = d:option(Flag, "enabled", translate("Enable"))
-c.optional=false; c.rmempty = false;
+c.optional = false
+c.rmempty = false
-- END Enable Checkbox
-
-- BEGIN Day(s) of Week
dow = d:option(MultiValue, "daysofweek", translate("Day(s) of Week"))
dow.optional = false
dow.rmempty = false
-dow:value("Monday")
-dow:value("Tuesday")
-dow:value("Wednesday")
-dow:value("Thursday")
-dow:value("Friday")
-dow:value("Saturday")
-dow:value("Sunday")
+dow:value("Monday", translate("Monday"))
+dow:value("Tuesday", translate("Tuesday"))
+dow:value("Wednesday", translate("Wednesday"))
+dow:value("Thursday", translate("Thursday"))
+dow:value("Friday", translate("Friday"))
+dow:value("Saturday", translate("Saturday"))
+dow:value("Sunday", translate("Sunday"))
-- END Day(s) of Weel
-- BEGIN Start Wifi Dropdown
starttime = d:option(Value, "starttime", translate("Start WiFi"))
-starttime.optional=false;
-starttime.rmempty = false;
+starttime.optional = false
+starttime.rmempty = false
starttime:value("00:00")
starttime:value("01:00")
starttime:value("02:00")
function starttime.validate(self, value, d)
return time_validator(self, value, translate("Start Time"))
end
-
-- END Start Wifi Dropdown
-
-- BEGIN Stop Wifi Dropdown
-stoptime = d:option(Value, "stoptime", translate("Stop WiFi"))
-stoptime.optional=false;
-stoptime.rmempty = false;
+stoptime = d:option(Value, "stoptime", translate("Stop WiFi"))
+stoptime.optional = false
+stoptime.rmempty = false
stoptime:value("00:00")
stoptime:value("01:00")
stoptime:value("02:00")
end
-- END Stop Wifi Dropdown
-
-- BEGIN Force Wifi Stop Checkbox
force_wifi = d:option(Flag, "forcewifidown", translate("Force disabling wifi even if stations associated"))
force_wifi.default = false
-force_wifi.rmempty = false;
+force_wifi.rmempty = false
function force_wifi.validate(self, value, d)
if value == "0" then
- if file_exists("/usr/bin/iwinfo") then
+ if fs.access("/usr/bin/iwinfo") then
return value
else
return nil, translate("Could not find required programm /usr/bin/iwinfo")
end
-- END Force Wifi Checkbox
-
return m
--- /dev/null
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
+"Language-Team: \n"
+"Language: ja\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+msgid "Activate wifi"
+msgstr "WiFiのアクティブ化"
+
+msgid "Could not find required /usr/bin/wifi_schedule.sh or /sbin/wifi"
+msgstr "必須の /usr/bin/wifi_schedule.sh または /sbin/wifi が見つかりませんでした。"
+
+msgid "Could not find required programm /usr/bin/iwinfo"
+msgstr "必須のプログラム /usr/bin/iwinfo が見つかりませんでした。"
+
+msgid "Cron Jobs"
+msgstr "Cronジョブ"
+
+msgid "Day(s) of Week"
+msgstr "曜日"
+
+msgid "Defines a schedule when to turn on and off wifi."
+msgstr "WiFiのオンとオフを切り替えるスケジュールを設定します。"
+
+msgid "Determine Modules Automatically"
+msgstr "モジュールを自動的に決定する"
+
+msgid "Disable wifi gracefully"
+msgstr "WiFiの通常終了"
+
+msgid "Disabled wifi forced"
+msgstr "WiFiの強制終了"
+
+msgid "Enable"
+msgstr "有効"
+
+msgid "Enable Wifi Schedule"
+msgstr "WiFi スケジュールの有効化"
+
+msgid "Enable logging"
+msgstr "ログの有効化"
+
+msgid "Force disabling wifi even if stations associated"
+msgstr "ステーションが関連付けられていてもWiFiを強制終了する"
+
+msgid "Friday"
+msgstr "金曜日"
+
+msgid "Global Settings"
+msgstr "全体設定"
+
+msgid "Monday"
+msgstr "月曜日"
+
+msgid "Saturday"
+msgstr "土曜日"
+
+msgid "Schedule"
+msgstr "スケジュール"
+
+msgid "Schedule events"
+msgstr "実行スケジュール"
+
+msgid "Start Time"
+msgstr "開始時刻"
+
+msgid "Start WiFi"
+msgstr "WiFiの開始"
+
+msgid "Stop Time"
+msgstr "停止時刻"
+
+msgid "Stop WiFi"
+msgstr "WiFiの停止"
+
+msgid "Sunday"
+msgstr "日曜日"
+
+msgid "The value %s is invalid"
+msgstr "%s の値が無効です"
+
+msgid "Thursday"
+msgstr "木曜日"
+
+msgid "Tuesday"
+msgstr "火曜日"
+
+msgid "Unload Modules (experimental; saves more power)"
+msgstr "モジュールのアンロード（実験的、より省電力）"
+
+msgid "View Cron Jobs"
+msgstr "Cronジョブの確認"
+
+msgid "View Logfile"
+msgstr "ログファイルの確認"
+
+msgid "Wednesday"
+msgstr "水曜日"
+
+msgid "Wifi Schedule"
+msgstr "WiFi スケジュール"
+
+msgid "Wifi Schedule Logfile"
+msgstr "WiFiスケジュール ログファイル"
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Language: pt_BR\n"
+
+msgid "Activate wifi"
+msgstr "Ativar a WiFi"
+
+msgid "Could not find required /usr/bin/wifi_schedule.sh or /sbin/wifi"
+msgstr ""
+"Não foi possível localizar os programas necessários '/usr/bin/wifi_schedule."
+"sh' ou '/sbin/wifi'."
+
+msgid "Could not find required programm /usr/bin/iwinfo"
+msgstr "Não foi possível localizar o programa necessário '/usr/bin/iwinfo'"
+
+msgid "Cron Jobs"
+msgstr "Tarefas da Cron"
+
+msgid "Day(s) of Week"
+msgstr "Dia(s) da semana"
+
+msgid "Defines a schedule when to turn on and off wifi."
+msgstr "Define um agendamento para quando ligar ou desligar a WiFi."
+
+msgid "Determine Modules Automatically"
+msgstr "Determinar os Módulos Automaticamente"
+
+msgid "Disable wifi gracefully"
+msgstr "Desabilitar a WiFi amistosamente"
+
+msgid "Disabled wifi forced"
+msgstr "WiFi foi desabilitada de forma forçada."
+
+msgid "Enable"
+msgstr "Habilitar"
+
+msgid "Enable Wifi Schedule"
+msgstr "Habilitar o agendamento da WiFi"
+
+msgid "Enable logging"
+msgstr "Habilite os registros (log)"
+
+msgid "Force disabling wifi even if stations associated"
+msgstr "Force a desativação da WiFi mesmo se existirem estações associadas "
+
+msgid "Friday"
+msgstr "Sexta-feira"
+
+msgid "Global Settings"
+msgstr "Configurações Globais"
+
+msgid "Monday"
+msgstr "Segunda-Feira"
+
+msgid "Saturday"
+msgstr "Sábado"
+
+msgid "Schedule"
+msgstr "Agendamento"
+
+msgid "Schedule events"
+msgstr "Eventos do agendamento"
+
+msgid "Start Time"
+msgstr "Hora Inicial"
+
+msgid "Start WiFi"
+msgstr "Iniciar WiFi"
+
+msgid "Stop Time"
+msgstr "Hora Final"
+
+msgid "Stop WiFi"
+msgstr "Parar WiFi"
+
+msgid "Sunday"
+msgstr "Domingo"
+
+msgid "The value %s is invalid"
+msgstr "O valor %s é inválido"
+
+msgid "Thursday"
+msgstr "Quita-feira"
+
+msgid "Tuesday"
+msgstr "Terça-feira"
+
+msgid "Unload Modules (experimental; saves more power)"
+msgstr "Descarregar Módulos (experimental, poupa mais energia)"
+
+msgid "View Cron Jobs"
+msgstr "Visualizar Tarefas da Cron"
+
+msgid "View Logfile"
+msgstr "Visualizar o Arquivo de Registros (log)"
+
+msgid "Wednesday"
+msgstr "Quarta-feira"
+
+msgid "Wifi Schedule"
+msgstr "Agendamento da Wifi"
+
+msgid "Wifi Schedule Logfile"
+msgstr "Arquivo de Registros (log) do Agendamento da Wifi"
--- /dev/null
+msgid ""
+msgstr "Content-Type: text/plain; charset=UTF-8"
+
+msgid "Activate wifi"
+msgstr ""
+
+msgid "Could not find required /usr/bin/wifi_schedule.sh or /sbin/wifi"
+msgstr ""
+
+msgid "Could not find required programm /usr/bin/iwinfo"
+msgstr ""
+
+msgid "Cron Jobs"
+msgstr ""
+
+msgid "Day(s) of Week"
+msgstr ""
+
+msgid "Defines a schedule when to turn on and off wifi."
+msgstr ""
+
+msgid "Determine Modules Automatically"
+msgstr ""
+
+msgid "Disable wifi gracefully"
+msgstr ""
+
+msgid "Disabled wifi forced"
+msgstr ""
+
+msgid "Enable"
+msgstr ""
+
+msgid "Enable Wifi Schedule"
+msgstr ""
+
+msgid "Enable logging"
+msgstr ""
+
+msgid "Force disabling wifi even if stations associated"
+msgstr ""
+
+msgid "Friday"
+msgstr ""
+
+msgid "Global Settings"
+msgstr ""
+
+msgid "Monday"
+msgstr ""
+
+msgid "Saturday"
+msgstr ""
+
+msgid "Schedule"
+msgstr ""
+
+msgid "Schedule events"
+msgstr ""
+
+msgid "Start Time"
+msgstr ""
+
+msgid "Start WiFi"
+msgstr ""
+
+msgid "Stop Time"
+msgstr ""
+
+msgid "Stop WiFi"
+msgstr ""
+
+msgid "Sunday"
+msgstr ""
+
+msgid "The value %s is invalid"
+msgstr ""
+
+msgid "Thursday"
+msgstr ""
+
+msgid "Tuesday"
+msgstr ""
+
+msgid "Unload Modules (experimental; saves more power)"
+msgstr ""
+
+msgid "View Cron Jobs"
+msgstr ""
+
+msgid "View Logfile"
+msgstr ""
+
+msgid "Wednesday"
+msgstr ""
+
+msgid "Wifi Schedule"
+msgstr ""
+
+msgid "Wifi Schedule Logfile"
+msgstr ""
--- /dev/null
+msgid ""
+msgstr "Content-Type: text/plain; charset=UTF-8\n"
+
+msgid "Activate wifi"
+msgstr "激活 WiFi"
+
+msgid "Could not find required /usr/bin/wifi_schedule.sh or /sbin/wifi"
+msgstr "无法找到必需的 /usr/bin/wifi_schedule.sh 或 /sbin/wifi"
+
+msgid "Could not find required programm /usr/bin/iwinfo"
+msgstr "无法找到必需程序：/usr/bin/iwinfo"
+
+msgid "Cron Jobs"
+msgstr "计划任务"
+
+msgid "Day(s) of Week"
+msgstr "星期"
+
+msgid "Defines a schedule when to turn on and off wifi."
+msgstr "定义自动打开和关闭 WiFi 的计划表"
+
+msgid "Determine Modules Automatically"
+msgstr "自动确定模块"
+
+msgid "Disable wifi gracefully"
+msgstr "正常关闭 WiFi"
+
+msgid "Disabled wifi forced"
+msgstr "强制关闭 WiFi"
+
+msgid "Enable"
+msgstr "启用"
+
+msgid "Enable Wifi Schedule"
+msgstr "启用 WiFi 计划"
+
+msgid "Enable logging"
+msgstr "启用日志"
+
+msgid "Force disabling wifi even if stations associated"
+msgstr "即使有设备连接也强制关闭 WiFi"
+
+msgid "Friday"
+msgstr "星期五"
+
+msgid "Global Settings"
+msgstr "全局设置"
+
+msgid "Monday"
+msgstr "星期一"
+
+msgid "Saturday"
+msgstr "星期六"
+
+msgid "Schedule"
+msgstr "计划表"
+
+msgid "Schedule events"
+msgstr "计划事件"
+
+msgid "Start Time"
+msgstr "启动时间"
+
+msgid "Start WiFi"
+msgstr "启动 WiFi"
+
+msgid "Stop Time"
+msgstr "关闭时间"
+
+msgid "Stop WiFi"
+msgstr "关闭 WiFi"
+
+msgid "Sunday"
+msgstr "星期日"
+
+msgid "The value %s is invalid"
+msgstr "%s 的值无效"
+
+msgid "Thursday"
+msgstr "星期四"
+
+msgid "Tuesday"
+msgstr "星期二"
+
+msgid "Unload Modules (experimental; saves more power)"
+msgstr "卸载模块（实验性的，节省更多电量）"
+
+msgid "View Cron Jobs"
+msgstr "查看计划任务"
+
+msgid "View Logfile"
+msgstr "查看日志文件"
+
+msgid "Wednesday"
+msgstr "星期三"
+
+msgid "Wifi Schedule"
+msgstr "WiFi 计划"
+
+msgid "Wifi Schedule Logfile"
+msgstr "WiFi 计划日志文件"
--- /dev/null
+#
+# Copyright (C) 2016-2017 Dan Luedtke <mail@danrl.com>
+#
+# This is free software, licensed under the Apache License, Version 2.0 .
+#
+
+include $(TOPDIR)/rules.mk
+
+LUCI_TITLE:=WireGuard Status
+LUCI_DEPENDS:=+wireguard-tools +kmod-wireguard
+LUCI_PKGARCH:=all
+
+PKG_MAINTAINER:=Dan Luedtke <mail@danrl.com>
+
+include ../../luci.mk
+
+# call BuildPackage - OpenWrt buildroot signature
--- /dev/null
+-- Copyright 2016-2017 Dan Luedtke <mail@danrl.com>
+-- Licensed to the public under the Apache License 2.0.
+
+module("luci.controller.wireguard", package.seeall)
+
+function index()
+ entry({"admin", "status", "wireguard"}, template("wireguard"), _("WireGuard Status"), 92)
+end
--- /dev/null
+<%#
+ Copyright 2016-2017 Dan Luedtke <mail@danrl.com>
+ Licensed to the public under the Apache License 2.0.
+-%>
+
+<%
+ local data = { }
+ local last_device = ""
+
+ local wg_dump = io.popen("wg show all dump")
+ if wg_dump then
+ local line
+ for line in wg_dump:lines() do
+ local line = string.split(line, "\t")
+ if not (last_device == line[1]) then
+ last_device = line[1]
+ data[line[1]] = {
+ name = line[1],
+ public_key = line[3],
+ listen_port = line[5],
+ fwmark = line[6],
+ peers = { }
+ }
+ else
+ local peer = {
+ public_key = line[2],
+ endpoint = line[3],
+ allowed_ips = { },
+ latest_handshake = line[5],
+ transfer_rx = line[6],
+ transfer_tx = line[7],
+ persistent_keepalive = line[8]
+ }
+ if not (line[4] == '(none)') then
+ for ipkey, ipvalue in pairs(string.split(line[4], ",")) do
+ if #ipvalue > 0 then
+ table.insert(peer['allowed_ips'], ipvalue)
+ end
+ end
+ end
+ table.insert(data[line[1]].peers, peer)
+ end
+ end
+ end
+
+ if luci.http.formvalue("status") == "1" then
+ luci.http.prepare_content("application/json")
+ luci.http.write_json(data)
+ return
+ end
+-%>
+
+<%+header%>
+
+<script type="text/javascript" src="<%=resource%>/cbi.js"></script>
+<script type="text/javascript">//<![CDATA[
+
+ function bytes_to_str(bytes) {
+ bytes = parseFloat(bytes);
+ if (bytes < 1) { return "0 B"; }
+ var sizes = ['B', 'KiB', 'MiB', 'GiB', 'TiB', 'PiB'];
+ var i = parseInt(Math.floor(Math.log(bytes) / Math.log(1024)));
+ return Math.round(bytes / Math.pow(1024, i), 2) + ' ' + sizes[i];
+ };
+
+ function timestamp_to_str(timestamp) {
+ if (timestamp < 1) {
+ return '<%:Never%>';
+ }
+ var now = new Date();
+ var seconds = (now.getTime() / 1000) - timestamp;
+ var ago = "";
+ if (seconds < 60) {
+ ago = parseInt(seconds) + '<%:s ago%>';
+ } else if (seconds < 3600) {
+ ago = parseInt(seconds / 60) + '<%:m ago%>';
+ } else if (seconds < 86401) {
+ ago = parseInt(seconds / 3600) + '<%:h ago%>';
+ } else {
+ ago = '<%:over a day ago%>';
+ }
+ var t = new Date(timestamp * 1000);
+ return t.toUTCString() + ' (' + ago + ')';
+ }
+
+ XHR.poll(5, '<%=REQUEST_URI%>', { status: 1 },
+ function(x, data) {
+ for (var key in data) {
+ if (!data.hasOwnProperty(key)) { continue; }
+ var ifname = key;
+ var iface = data[key];
+ var s = "";
+ if (iface.public_key == '(none)') {
+ s += '<em><%:Interface does not have a public key!%></em>';
+ } else {
+ s += String.format(
+ '<strong><%:Public Key%>: </strong>%s',
+ iface.public_key
+ );
+ }
+ if (iface.listen_port > 0) {
+ s += String.format(
+ '<br /><strong><%:Listen Port%>: </strong>%s',
+ iface.listen_port
+ );
+ }
+ if (iface.fwmark != 'off') {
+ s += String.format(
+ '<br /><strong><%:Firewall Mark%>: </strong>%s',
+ iface.fwmark
+ );
+ }
+ document.getElementById(ifname + "_info").innerHTML = s;
+ for (var i = 0, ilen = iface.peers.length; i < ilen; i++) {
+ var peer = iface.peers[i];
+ var s = String.format(
+ '<strong><%:Public Key%>: </strong>%s',
+ peer.public_key
+ );
+ if (peer.endpoint != '(none)') {
+ s += String.format(
+ '<br /><strong><%:Endpoint%>: </strong>%s',
+ peer.endpoint
+ );
+ }
+ if (peer.allowed_ips.length > 0) {
+ s += '<br /><strong><%:Allowed IPs%>:</strong>';
+ for (var k = 0, klen = peer.allowed_ips.length; k < klen; k++) {
+ s += '<br /> • ' + peer.allowed_ips[k];
+ }
+ }
+ if (peer.persistent_keepalive != 'off') {
+ s += String.format(
+ '<br /><strong><%:Persistent Keepalive%>: </strong>%ss',
+ peer.persistent_keepalive
+ );
+ }
+ var icon = '<img src="<%=resource%>/icons/tunnel_disabled.png" />';
+ var now = new Date();
+ if (((now.getTime() / 1000) - peer.latest_handshake) < 140) {
+ icon = '<img src="<%=resource%>/icons/tunnel.png" />';
+ }
+ s += String.format(
+ '<br /><strong><%:Latest Handshake%>: </strong>%s',
+ timestamp_to_str(peer.latest_handshake)
+ );
+ s += String.format(
+ '<br /><strong><%:Data Received%>: </strong>%s' +
+ '<br /><strong><%:Data Transmitted%>: </strong>%s',
+ bytes_to_str(peer.transfer_rx),
+ bytes_to_str(peer.transfer_tx)
+ );
+ document.getElementById(ifname + "_" + peer.public_key + "_icon").innerHTML = icon;
+ document.getElementById(ifname + "_" + peer.public_key + "_info").innerHTML = s;
+ }
+ }
+ });
+//]]></script>
+
+<h2>WireGuard Status</h2>
+
+<fieldset class="cbi-section">
+<%-
+for ikey, iface in pairs(data) do
+ -%>
+ <legend><%:Interface%> <%=ikey%></legend>
+ <table width="100%" cellspacing="10">
+ <tr>
+ <td width="33%" style="vertical-align:top"><%:Configuration%></td>
+ <td>
+ <table>
+ <tr>
+ <td id="<%=ikey%>_icon" style="width:16px; text-align:center; padding:3px">
+
+ </td>
+ <td id="<%=ikey%>_info" style="vertical-align:middle; padding: 3px">
+ <em><%:Collecting data...%></em>
+ </td>
+ </tr></table>
+ </td>
+ </tr>
+ <%-
+ for pkey, peer in pairs(iface.peers) do
+ -%>
+ <tr>
+ <td width="33%" style="vertical-align:top"><%:Peer%></td>
+ <td>
+ <table>
+ <tr>
+ <td id="<%=ikey%>_<%=peer.public_key%>_icon" style="width:16px; text-align:center; padding:3px">
+ <img src="<%=resource%>/icons/tunnel_disabled.png" /><br />
+ <small>?</small>
+ </td>
+ <td id="<%=ikey%>_<%=peer.public_key%>_info" style="vertical-align:middle; padding: 3px">
+ <em><%:Collecting data...%></em>
+ </td>
+ </tr></table>
+ </td>
+ </tr>
+ <%-
+ end
+ -%>
+ </table>
+ <%-
+end
+-%>
+</fieldset>
+
+<%+footer%>
--- /dev/null
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: 2017-02-28 00:31+0900\n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
+"Language-Team: \n"
+"Language: ja\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.12\n"
+"X-Poedit-Basepath: .\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+msgid "Allowed IPs"
+msgstr "許可されたIP"
+
+msgid "Collecting data..."
+msgstr "データ収集中です..."
+
+msgid "Configuration"
+msgstr "設定"
+
+msgid "Data Received"
+msgstr "受信済みデータ"
+
+msgid "Data Transmitted"
+msgstr "送信済みデータ"
+
+msgid "Endpoint"
+msgstr "エンドポイント"
+
+msgid "Firewall Mark"
+msgstr "ファイアウォール マーク"
+
+msgid "Interface"
+msgstr "インターフェース"
+
+msgid "Interface does not have a public key!"
+msgstr "インターフェースに公開鍵がありません！"
+
+msgid "Latest Handshake"
+msgstr "最新のハンドシェイク"
+
+msgid "Listen Port"
+msgstr "待ち受けポート"
+
+msgid "Never"
+msgstr "無し"
+
+msgid "Peer"
+msgstr "ピア"
+
+msgid "Persistent Keepalive"
+msgstr "永続的なキープアライブ"
+
+msgid "Public Key"
+msgstr "公開鍵"
+
+msgid "WireGuard Status"
+msgstr "WireGuard ステータス"
+
+msgid "h ago"
+msgstr "時間前"
+
+msgid "m ago"
+msgstr "分前"
+
+msgid "over a day ago"
+msgstr "1日以上前"
+
+msgid "s ago"
+msgstr "秒前"
--- /dev/null
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: \n"
+"POT-Creation-Date: \n"
+"PO-Revision-Date: \n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Language: pt_BR\n"
+
+msgid "Allowed IPs"
+msgstr "Endereços IP autorizados"
+
+msgid "Collecting data..."
+msgstr "Coletando dados..."
+
+msgid "Configuration"
+msgstr "Configuração"
+
+msgid "Data Received"
+msgstr "Dados Recebidos"
+
+msgid "Data Transmitted"
+msgstr "Dados Enviados"
+
+msgid "Endpoint"
+msgstr "Equipamento do ponto final"
+
+msgid "Firewall Mark"
+msgstr "Marca do Firewall"
+
+msgid "Interface"
+msgstr "Interface"
+
+msgid "Interface does not have a public key!"
+msgstr "A interface não tem uma chave pública!"
+
+msgid "Latest Handshake"
+msgstr "Última Negociação"
+
+msgid "Listen Port"
+msgstr "Porta de Escuta"
+
+msgid "Never"
+msgstr "Nunca"
+
+msgid "Peer"
+msgstr "Parceiro"
+
+msgid "Persistent Keepalive"
+msgstr "Manter Conexões Abertas (Keepalive)"
+
+msgid "Public Key"
+msgstr "Chave Pública"
+
+msgid "WireGuard Status"
+msgstr "Estado do WireGuard"
+
+msgid "h ago"
+msgstr "horas atrás"
+
+msgid "m ago"
+msgstr "meses atrás"
+
+msgid "over a day ago"
+msgstr "mais de um dia atrás"
+
+msgid "s ago"
+msgstr "segundos atrás"
--- /dev/null
+msgid ""
+msgstr "Content-Type: text/plain; charset=UTF-8"
+
+msgid "Allowed IPs"
+msgstr ""
+
+msgid "Collecting data..."
+msgstr ""
+
+msgid "Configuration"
+msgstr ""
+
+msgid "Data Received"
+msgstr ""
+
+msgid "Data Transmitted"
+msgstr ""
+
+msgid "Endpoint"
+msgstr ""
+
+msgid "Firewall Mark"
+msgstr ""
+
+msgid "Interface"
+msgstr ""
+
+msgid "Interface does not have a public key!"
+msgstr ""
+
+msgid "Latest Handshake"
+msgstr ""
+
+msgid "Listen Port"
+msgstr ""
+
+msgid "Never"
+msgstr ""
+
+msgid "Peer"
+msgstr ""
+
+msgid "Persistent Keepalive"
+msgstr ""
+
+msgid "Public Key"
+msgstr ""
+
+msgid "WireGuard Status"
+msgstr ""
+
+msgid "h ago"
+msgstr ""
+
+msgid "m ago"
+msgstr ""
+
+msgid "over a day ago"
+msgstr ""
+
+msgid "s ago"
+msgstr ""
module("luci.controller.wol", package.seeall)
function index()
- entry({"admin", "network", "wol"}, cbi("wol"), _("Wake on LAN"), 90)
- entry({"mini", "network", "wol"}, cbi("wol"), _("Wake on LAN"), 90)
+ entry({"admin", "services", "wol"}, cbi("wol"), _("Wake on LAN"), 90)
+ entry({"mini", "services", "wol"}, cbi("wol"), _("Wake on LAN"), 90)
end
host:value(mac, "%s (%s)" %{ mac, name })
end)
+if has_ewk then
+ broadcast = s:option(Flag, "broadcast",
+ translate("Send to broadcast address"))
+ if has_wol then
+ broadcast:depends("binary", "/usr/bin/etherwake")
+ end
+end
function host.write(self, s, val)
local host = luci.http.formvalue("cbid.wol.1.mac")
if util == "/usr/bin/etherwake" then
local iface = luci.http.formvalue("cbid.wol.1.iface")
- cmd = "%s -D%s %q" %{
- util, (iface ~= "" and " -i %q" % iface or ""), host
+ local broadcast = luci.http.formvalue("cbid.wol.1.broadcast")
+ cmd = "%s -D%s %s %q" %{
+ util, (iface ~= "" and " -i %q" % iface or ""),
+ (broadcast == "1" and " -b" or ""), host
}
else
cmd = "%s -v %q" %{ util, host }
msgid "Network interface to use"
msgstr "Interfície de xarxa per a utilitzar"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgid "Network interface to use"
msgstr "Použité síťové rozhraní"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgid "Network interface to use"
msgstr "Verwendete Schnittstelle"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgid "Network interface to use"
msgstr ""
+msgid "Send to broadcast address"
+msgstr ""
+
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgstr ""
msgid "Network interface to use"
msgstr "Network interface to use"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgid "Network interface to use"
msgstr "Interfaz de red a utilizar"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgid "Network interface to use"
msgstr "Interface réseau à utiliser"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgid "Network interface to use"
msgstr ""
+msgid "Send to broadcast address"
+msgstr ""
+
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgstr ""
msgid "Network interface to use"
msgstr "Használandó interfész"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgid "Network interface to use"
msgstr "Interfacci di rete da usare"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
#
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2013-10-06 17:12+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
+"PO-Revision-Date: 2017-01-27 21:03+0900\n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
"Language-Team: none\n"
"Language: ja\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
msgid "Broadcast on all interfaces"
msgstr "全てのインターフェースへブロードキャスト"
msgid "Network interface to use"
msgstr "使用するネットワークインターフェース"
-#, fuzzy
+msgid "Send to broadcast address"
+msgstr "ブロードキャスト アドレスに送信する"
+
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgstr ""
-"片方のツールのみが動作する場合があるため、片方が失敗する場合は別のツールを試"
-"してみてください。"
+"片方のツールのみが動作する場合があるため、片方が失敗する場合は別のツールを"
+"試してみてください。"
msgid "Specifies the interface the WoL packet is sent on"
msgstr "WoLパケットを送信するインタフェースを指定"
msgid ""
"Wake on LAN is a mechanism to remotely boot computers in the local network."
msgstr ""
-"Wake on LANはローカルネットワーク内のコンピュータを遠隔で起動させることができ"
-"る機能です。"
+"Wake on LANはローカルネットワーク内のコンピュータを遠隔で起動させることがで"
+"ã\81\8dã\82\8bæ©\9fè\83½ã\81§ã\81\99ã\80\82"
msgid "Wake up host"
msgstr "ホストを起動"
msgid "Network interface to use"
msgstr ""
+msgid "Send to broadcast address"
+msgstr ""
+
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgstr ""
msgid "Network interface to use"
msgstr "Nettverksgrensesnitt"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgid "Network interface to use"
msgstr "Użyty interfejs sieciowy"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
#
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2011-10-11 20:31+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
+"PO-Revision-Date: 2017-02-20 18:13-0300\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
"Language-Team: none\n"
"Language: pt_BR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
+"X-Generator: Poedit 1.8.11\n"
msgid "Broadcast on all interfaces"
msgstr "Broadcast em todas as interfaces"
msgid "Network interface to use"
msgstr "Interfaces de rede para usar"
-#, fuzzy
+msgid "Send to broadcast address"
+msgstr "Enviar para o endereço de broadcast"
+
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgstr ""
-"Algumas vezes, somente uma das ferramentas funciona. Se uma delas falhar, "
-"tente a outra"
+"Algumas vezes, somente uma das duas ferramentas funciona. Se uma delas "
+"falhar, tente a outra"
msgid "Specifies the interface the WoL packet is sent on"
msgstr "Especifica a interface para onde os pacotes de WoL serão enviados"
msgid "Network interface to use"
msgstr "Interface de rede a usar"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgid "Network interface to use"
msgstr "Interfata de retea pentru utilizare"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgid "Network interface to use"
msgstr "Используемый сетевой интерфейс"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgid "Network interface to use"
msgstr ""
+msgid "Send to broadcast address"
+msgstr ""
+
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgstr ""
msgid "Network interface to use"
msgstr "Nätverksgränssnitt som ska användas"
+msgid "Send to broadcast address"
+msgstr ""
+
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgstr ""
msgid "Network interface to use"
msgstr ""
+msgid "Send to broadcast address"
+msgstr ""
+
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgstr ""
msgid "Network interface to use"
msgstr ""
+msgid "Send to broadcast address"
+msgstr ""
+
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgstr ""
msgid "Network interface to use"
msgstr "Використовувати мережевий інтерфейс"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgid "Network interface to use"
msgstr ""
+msgid "Send to broadcast address"
+msgstr ""
+
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgstr ""
msgid "Network interface to use"
msgstr "选择使用的网络接口"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
msgid "Network interface to use"
msgstr "使用的網路介面"
+msgid "Send to broadcast address"
+msgstr ""
+
#, fuzzy
msgid ""
"Sometimes only one of the two tools works. If one fails, try the other one"
+++ /dev/null
-#
-# Copyright (C) 2008-2014 The LuCI Team <luci@lists.subsignal.org>
-#
-# This is free software, licensed under the Apache License, Version 2.0 .
-#
-
-include $(TOPDIR)/rules.mk
-
-LUCI_TITLE:=LuCI Support for wshaper
-LUCI_DEPENDS:=+wshaper
-
-include ../../luci.mk
-
-# call BuildPackage - OpenWrt buildroot signature
+++ /dev/null
--- Copyright 2011 Manuel Munz <freifunk somakoma de>
--- Licensed to the public under the Apache License 2.0.
-
-module "luci.controller.wshaper"
-
-function index()
- entry({"admin", "network", "wshaper"}, cbi("wshaper"), _("Wondershaper"), 80)
-end
-
+++ /dev/null
--- Copyright 2011 Manuel Munz <freifunk at somakoma dot de>
--- Licensed to the public under the Apache License 2.0.
-
-require("luci.tools.webadmin")
-
-m = Map("wshaper", translate("Wondershaper"),
- translate("Wondershaper shapes traffic to ensure low latencies for interactive traffic even when your " ..
- "internet connection is highly saturated."))
-
-s = m:section(NamedSection, "settings", "wshaper", translate("Wondershaper settings"))
-s.anonymous = true
-
-network = s:option(ListValue, "network", translate("Interface"))
-luci.tools.webadmin.cbi_add_networks(network)
-
-uplink = s:option(Value, "uplink", translate("Uplink"), translate("Upstream bandwidth in kbit/s"))
-uplink.optional = false
-uplink.datatype = "uinteger"
-uplink.default = "240"
-
-uplink = s:option(Value, "downlink", translate("Downlink"), translate("Downstream bandwidth in kbit/s"))
-uplink.optional = false
-uplink.datatype = "uinteger"
-uplink.default = "200"
-
-nopriohostsrc = s:option(DynamicList, "nopriohostsrc", translate("Low priority hosts (Source)"), translate("Host or Network in CIDR notation."))
-nopriohostsrc.optional = true
-nopriohostsrc.datatype = ipaddr
-nopriohostsrc.placeholder = "10.0.0.1/32"
-
-nopriohostdst = s:option(DynamicList, "nopriohostdst", translate("Low priority hosts (Destination)"), translate("Host or Network in CIDR notation."))
-nopriohostdst.optional = true
-nopriohostdst.datatype = ipaddr
-nopriohostdst.placeholder = "10.0.0.1/32"
-
-noprioportsrc = s:option(DynamicList, "noprioportsrc", translate("Low priority source ports"))
-noprioportsrc.optional = true
-noprioportsrc.datatype = "range(0,65535)"
-noprioportsrc.placeholder = "21"
-
-noprioportdst = s:option(DynamicList, "noprioportdst", translate("Low priority destination ports"))
-noprioportdst.optional = true
-noprioportdst.datatype = "range(0,65535)"
-noprioportdst.placeholder = "21"
-
-return m
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-06-01 22:51+0200\n"
-"PO-Revision-Date: 2014-07-01 03:51+0200\n"
-"Last-Translator: Alex <alexhenrie24@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ca\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Downlink"
-msgstr "Enllaç descendent"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Amplada de banda descendent en kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Host o xarxa en notació CIDR."
-
-msgid "Interface"
-msgstr "Interfície"
-
-msgid "Low priority destination ports"
-msgstr "Ports de destí de baixa prioritat"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Hosts de baixa prioritat (destí)"
-
-msgid "Low priority hosts (Source)"
-msgstr "Hosts de baixa prioritat (origen)"
-
-msgid "Low priority source ports"
-msgstr "Ports d'origen de baixa prioritat"
-
-msgid "Uplink"
-msgstr "Enllaç ascendent"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Amplada de banda ascendent en kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Ajusts del Wondershaper"
-
-#, fuzzy
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-"Wondershapter afaiçona el trànsit per assegurar latències baixes per a "
-"trànsit interactiu encara que la vostra connexió de Internet estigui "
-"altament saturada."
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-24 15:20+0200\n"
-"Last-Translator: awm1 <awm1klimes8vladimir@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Downlink"
-msgstr "Příchozí rychlost"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Rychlost stahování dat v kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Adresa počítače nebo sítě v CIDR notaci."
-
-msgid "Interface"
-msgstr "Síťové rozhraní"
-
-msgid "Low priority destination ports"
-msgstr "Cílové porty s nízkou prioritou"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Adresy cílových počítačů s nízkou prioritou"
-
-msgid "Low priority hosts (Source)"
-msgstr "Adresy zdrojových počítačů s nízkou prioritou"
-
-msgid "Low priority source ports"
-msgstr "Zdrojové porty s nízkou prioritou"
-
-msgid "Uplink"
-msgstr "Odchozí rychlost"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Rychlost odesílání dat v kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Nastavení skriptu Wondershaper"
-
-#, fuzzy
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-"Úkolem skriptu Wondershaper je řízení provozu na daném síťovém rozhraní. "
-"Snaží se zajistit nízké přenosové zpoždění pro \"interaktivní\" síťový "
-"provoz (např. SSH), a to především v okamžicích, kdy ostatní síťový provoz "
-"zahltí linku."
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: \n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: 2011-10-18 12:28+0200\n"
-"Last-Translator: Manuel <freifunk@somakoma.de>\n"
-"Language-Team: \n"
-"Language: de\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Downlink"
-msgstr "Download"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Download Bandbreite in kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Rechner oder Netzwerk in CIDR Schreibweise"
-
-msgid "Interface"
-msgstr "Schnittstelle"
-
-msgid "Low priority destination ports"
-msgstr "Zielports mit niedriger Priorität"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Zielrechner mit nideriger Priorität"
-
-msgid "Low priority hosts (Source)"
-msgstr "Quellrechner mit neidriger Priorität"
-
-msgid "Low priority source ports"
-msgstr "Quellports mit niedriger Priorität"
-
-msgid "Uplink"
-msgstr "Upload"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Upload Bandbreite in kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Wondershaper Einstellungen"
-
-#, fuzzy
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-"Wondershaper ermöglicht mit Hilfe von Traffic Shaping niedrige Latenzzeiten "
-"für interaktiven Internetverkehr selbst wenn die Internetverbindung extrem "
-"ausgelastet ist."
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-03-18 17:10+0200\n"
-"PO-Revision-Date: 2012-03-18 17:10+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr "Διεπαφή"
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
+++ /dev/null
-msgid ""
-msgstr ""
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"Project-Id-Version: LuCI\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: \n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: en\n"
-"X-Generator: Poedit 1.6.10\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-04-16 01:00+0200\n"
-"PO-Revision-Date: 2012-09-03 18:57+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Downlink"
-msgstr "Enlace de bajada"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Ancho de banda de bajada en Kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Máquina o red en notación CIDR."
-
-msgid "Interface"
-msgstr "Interfaz"
-
-msgid "Low priority destination ports"
-msgstr "Puertos de destino de prioridad baja"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Máquinas de prioridad baja (destino)"
-
-msgid "Low priority hosts (Source)"
-msgstr "Máquinas de prioridad baja (origen)"
-
-msgid "Low priority source ports"
-msgstr "Puertos de origen de prioridad baja"
-
-msgid "Uplink"
-msgstr "Enlace de salida"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Ancho de banda de subida en Kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Configuración de Wondershaper"
-
-#, fuzzy
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-"Wondershaper modela el tráfico para asegurar latencias bajas al tráfico "
-"interactivo incluso cuando la conexión a Internet esté muy saturada."
+++ /dev/null
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"Project-Id-Version: LuCI\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: \n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: fr\n"
-"X-Generator: Poedit 1.6.10\n"
-
-msgid "Downlink"
-msgstr "Lien descendant (télé-chargement)"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Bande-passante descendante en kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Hôte ou réseau en notation CIDR."
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Low priority destination ports"
-msgstr "Ports-cible à faible priorité"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Hôtes-cible à faible priorité"
-
-msgid "Low priority hosts (Source)"
-msgstr "Hôtes-source à faible priorité"
-
-msgid "Low priority source ports"
-msgstr "Ports-source à faible priorité"
-
-msgid "Uplink"
-msgstr "Lien montant (envois)"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Bande-passante montante en kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Paramètres Wondershaper"
-
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-
-#~ msgid ""
-#~ "Wondershaper uses traffic shaping to ensure low latencies for interactive "
-#~ "traffic even when your internet connection is highly saturated."
-#~ msgstr ""
-#~ "Wondershaper gère la priorités entre les flux pour assurer une faible "
-#~ "latence au trafic interactif même quand votre connexion Internet est très "
-#~ "chargée."
+++ /dev/null
-msgid ""
-msgstr ""
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"Project-Id-Version: LuCI\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: \n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: he\n"
-"X-Generator: Poedit 1.6.10\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Downlink"
-msgstr "Letöltés"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Letöltési sebesség kbit/másodberc-ben"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Gép vagy hálózat (CIDR jelöléssel)"
-
-msgid "Interface"
-msgstr "Interfész"
-
-msgid "Low priority destination ports"
-msgstr "Alacsony prioritású cél portok"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Alacson prioritású cél gépek"
-
-msgid "Low priority hosts (Source)"
-msgstr "Alacsony prioritású forrás gépek"
-
-msgid "Low priority source ports"
-msgstr "Alacson prioritású forrás portok"
-
-msgid "Uplink"
-msgstr "Feltöltés"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Feltöltési sebesség kbit/másodperc-ben"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Wondershaper beállítások"
-
-#, fuzzy
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-"A Wondershaper 'traffic shaping'-et használatával biztosítja az interaktív "
-"forgalom alacsony késleletetését még akkor is ha az internet kapcsolat "
-"erősen leterhelt."
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-01-28 01:36+0200\n"
-"PO-Revision-Date: 2013-02-03 14:07+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Downlink"
-msgstr "Collegamento discendente"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Larghezza di banda in downstream in kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Host o rete in notazione CIDR."
-
-msgid "Interface"
-msgstr "Interfaccia"
-
-msgid "Low priority destination ports"
-msgstr "Porte di destinazione a bassa priorità"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Hosts a bassa priorità (Destinazione)"
-
-msgid "Low priority hosts (Source)"
-msgstr "Hosts a bassa priorità (Fonte)"
-
-msgid "Low priority source ports"
-msgstr "Porte sorgenti a bassa priorità"
-
-msgid "Uplink"
-msgstr "Uplink"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Larghezza di banda in upstream in kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Impostazioni Wondershaper"
-
-#, fuzzy
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-"WonderShaper usa la regolazione del traffico per garantire bassa latenza per "
-"il traffico interattivo anche quando la connessione a Internet è molto "
-"satura."
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-03-17 18:28+0200\n"
-"PO-Revision-Date: 2012-03-18 09:07+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Downlink"
-msgstr "下りリンク"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "下りリンク帯域 (kbit/sec)"
-
-msgid "Host or Network in CIDR notation."
-msgstr "ホスト名またはCIDR表記のネットワークアドレス"
-
-msgid "Interface"
-msgstr "インターフェース"
-
-msgid "Low priority destination ports"
-msgstr "低優先度の宛先ポート"
-
-msgid "Low priority hosts (Destination)"
-msgstr "低優先度の宛先ホスト"
-
-msgid "Low priority hosts (Source)"
-msgstr "低優先度の送信元ホスト"
-
-msgid "Low priority source ports"
-msgstr "低優先度の送信元ポート"
-
-msgid "Uplink"
-msgstr "上りリンク"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "上りリンク帯域 (kbit/sec)"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Wondershaper 設定"
-
-#, fuzzy
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-"Wondweshaperは、インターネット接続が飽和状態の場合でも、低いレイテンシ・円滑"
-"な通信を実現するためにトラフィック・シェーピングを行います。"
+++ /dev/null
-msgid ""
-msgstr ""
-"Plural-Forms: nplurals=1; plural=0;\n"
-"Project-Id-Version: LuCI\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: \n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: ms\n"
-"X-Generator: Poedit 1.6.10\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
+++ /dev/null
-msgid ""
-msgstr ""
-"Language: nn\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"Project-Id-Version: LuCI\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: \n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 1.6.10\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-04-14 14:15+0200\n"
-"PO-Revision-Date: 2012-04-14 17:21+0200\n"
-"Last-Translator: Tomecki <przykryweczka@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Downlink"
-msgstr "Downlink"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Przepustowość pobierania w kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Adres hosta lub adres sieci w notacji CIDR"
-
-msgid "Interface"
-msgstr "Interfejs"
-
-msgid "Low priority destination ports"
-msgstr "Porty docelowe o niskim priorytecie"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Hosty docelowe o niskim priorytecie"
-
-msgid "Low priority hosts (Source)"
-msgstr "Hosty źródłowe o niskim priorytecie"
-
-msgid "Low priority source ports"
-msgstr "Porty źródłowe o niskim priorytecie"
-
-msgid "Uplink"
-msgstr "Uplink"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Przepustowość wysyłania w kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Ustawienia Wondershaper"
-
-#, fuzzy
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-"Wondershaper wykorzystuje kształtowanie ruchu aby zapewnić niskie opóźnienia "
-"nawet wtedy, gdy Twoje połączenie internetowe jest wysycone."
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-10-18 19:32+0200\n"
-"PO-Revision-Date: 2011-10-18 19:39+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Downlink"
-msgstr "Velocidade para baixar (downlink)"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Taxa de transferência para baixar em kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Equipamento ou Rede na notação CIDR."
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Low priority destination ports"
-msgstr "Portas de destino de baixa prioridade"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Equipamentos de baixa prioridade (Destino)"
-
-msgid "Low priority hosts (Source)"
-msgstr "Equipamentos de baixa prioridade (Origem)"
-
-msgid "Low priority source ports"
-msgstr "Portas de origem de baixa prioridade"
-
-msgid "Uplink"
-msgstr "Velocidade para subir (uplink)"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Taxa de transferência para subir em kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Configuração do Wondershaper"
-
-#, fuzzy
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-"Wondershaper usa o controle de tráfego para garantir baixa latência para "
-"tráfego interativo mesmo quando sua conexão com a internet está extremamente "
-"saturada."
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-05-31 12:13+0200\n"
-"PO-Revision-Date: 2013-05-31 12:15+0200\n"
-"Last-Translator: joao.f.vieira <joao.f.vieira@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Low priority destination ports"
-msgstr "Porta de destino com baixa prioridade"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Hosts com baixa prioridade (Destino)"
-
-msgid "Low priority hosts (Source)"
-msgstr "Hosts com baixa prioridade (Origem)"
-
-msgid "Low priority source ports"
-msgstr "Portas de origem com baixa prioridade"
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-06-28 18:45+0200\n"
-"PO-Revision-Date: 2014-06-28 18:46+0200\n"
-"Last-Translator: xxvirusxx <condor20_05@yahoo.it>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: wsharper\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-01-26 15:09+0200\n"
-"PO-Revision-Date: 2012-08-15 11:53+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Downlink"
-msgstr "Нисходящий канал"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Ширина полосы пропускания прямого канала (кбит/с)"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Хост или сеть в нотации CIDR."
-
-msgid "Interface"
-msgstr "Интерфейс"
-
-msgid "Low priority destination ports"
-msgstr "Низкоприоритетные порты назначения"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Низкоприоритетные хосты назначения"
-
-msgid "Low priority hosts (Source)"
-msgstr "Низкоприоритетные хосты источника"
-
-msgid "Low priority source ports"
-msgstr "Низкоприоритетные порты источника"
-
-msgid "Uplink"
-msgstr "Восходящий канал"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Пропускная способность обратного канала (кбит/c)"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Установки Wondershaper"
-
-#, fuzzy
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-"Wondershaper использует формирование трафика для обеспечения низких задержек "
-"интерактивного трафика даже в случае высокой загруженности интернет-"
-"соединения."
+++ /dev/null
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
+++ /dev/null
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: sv\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Downlink"
-msgstr "Nerladdningslänk"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Nerströms bandbredd i kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Värd eller Nätverk i CIDR-noteringen"
-
-msgid "Interface"
-msgstr "Gränssnitt"
-
-msgid "Low priority destination ports"
-msgstr "Destinations-portar med låg prioritet"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Värdar med låg prioritet (Destination)"
-
-msgid "Low priority hosts (Source)"
-msgstr "Värdar med låg prioritet (Källa)"
-
-msgid "Low priority source ports"
-msgstr "Käll-portar med låg prioritet"
-
-msgid "Uplink"
-msgstr "Uppladdningslänk"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Bandbredd uppströms i kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Inställningar för Wondershaper"
-
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-"Wondershaper formar trafiken för att säkerställa låga latenser för "
-"interaktiv trafik även när din internetanslutning är mättad som mest."
+++ /dev/null
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-28 21:54+0200\n"
-"Last-Translator: Yurii <yuripet@gmail.com>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Downlink"
-msgstr "Прямий канал"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Ширина смуги пропускання прямого каналу (кбіт/с)"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Вузол або мережа в нотації CIDR."
-
-msgid "Interface"
-msgstr "Інтерфейс"
-
-msgid "Low priority destination ports"
-msgstr "Низькопріоритетні порти призначення"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Низькопріоритетні вузли призначення"
-
-msgid "Low priority hosts (Source)"
-msgstr "Низькопріоритетні вузли джерела"
-
-msgid "Low priority source ports"
-msgstr "Низькопріоритетні порти джерела"
-
-msgid "Uplink"
-msgstr "Зворотній канал"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Ширина смуги пропускання зворотного каналу (кбіт/c)"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Налаштування Wondershaper"
-
-#, fuzzy
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-"Wondershaper використовує формування трафіку для забезпечення низької "
-"затримки інтерактивного трафіку, навіть якщо ваше з'єднання з інтернетом "
-"дуже насичене."
+++ /dev/null
-msgid ""
-msgstr ""
-"Plural-Forms: nplurals=1; plural=0;\n"
-"Project-Id-Version: LuCI\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: \n"
-"Last-Translator: \n"
-"Language-Team: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Language: vi\n"
-"X-Generator: Poedit 1.6.10\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-11-03 08:25+0200\n"
-"PO-Revision-Date: 2013-10-10 20:15+0200\n"
-"Last-Translator: Tanyingyu <Tanyingyu@163.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Downlink"
-msgstr "下载链接"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "下载带宽kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "主机或网络的CIDR标记。"
-
-msgid "Interface"
-msgstr "端口"
-
-msgid "Low priority destination ports"
-msgstr "低优先级目标端口"
-
-msgid "Low priority hosts (Destination)"
-msgstr "低优先级目标主机"
-
-msgid "Low priority hosts (Source)"
-msgstr "低优先级源主机"
-
-msgid "Low priority source ports"
-msgstr "低优先级源端口"
-
-msgid "Uplink"
-msgstr "上联"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "上行带宽kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Wondershaper设置"
-
-#, fuzzy
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-"Wondershaper通过流量匹配,确保低延时的交互数据包，甚至当你的互联网连接是高度饱"
-"和。"
+++ /dev/null
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2014-05-14 12:40+0200\n"
-"Last-Translator: omnistack <omnistack@gmail.com>\n"
-"Language-Team: none\n"
-"Language: zh_TW\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Downlink"
-msgstr "下載"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "以 kbit/s表示的下載頻寬"
-
-msgid "Host or Network in CIDR notation."
-msgstr "CIDR無類別域間路由中的主機或網路"
-
-msgid "Interface"
-msgstr "介面"
-
-msgid "Low priority destination ports"
-msgstr "低優先權目地埠號"
-
-msgid "Low priority hosts (Destination)"
-msgstr "低優先權主機(目的地)"
-
-msgid "Low priority hosts (Source)"
-msgstr "低優先權主機(來源)"
-
-msgid "Low priority source ports"
-msgstr "低優先權來源埠號"
-
-msgid "Uplink"
-msgstr "上傳"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "以kbit/s表示的上傳頻寬"
-
-msgid "Wondershaper"
-msgstr "Wondershaper頻寬管理"
-
-msgid "Wondershaper settings"
-msgstr "Wondershaper設定值"
-
-#, fuzzy
-msgid ""
-"Wondershaper shapes traffic to ensure low latencies for interactive traffic "
-"even when your internet connection is highly saturated."
-msgstr ""
-"既使你的網路連線達到高飽和, Wondershaper採用流量銳化塑形以針對未知的流量保證"
-"低延遲"
+++ /dev/null
-#!/bin/sh
-
-uci -q batch <<-EOF >/dev/null
- delete ucitrack.@wshaper[-1]
- set ucitrack.wshaper="wshaper"
- set ucitrack.wshaper.exec='/etc/init.d/wshaper start'
- commit ucitrack
-EOF
-
-rm -f /tmp/luci-indexcache
-exit 0
LUCI_TITLE:=LuCI with HTTPS support (OpenSSL as SSL backend)
LUCI_DESCRIPTION:=LuCI with OpenSSL as the SSL backend (libustream-openssl). \
- Note: px5g still requires libpolarssl
-LUCI_DEPENDS:=+luci +libustream-openssl +px5g
+ OpenSSL cmd tools (openssl-util) are used by uhttpd for SSL key generation \
+ instead of the default px5g. (If px5g is installed, uhttpd will prefer that.)
+
+LUCI_DEPENDS:=+luci +libustream-openssl +openssl-util
include ../../luci.mk
LUCI_TYPE:=col
LUCI_BASENAME:=ssl
-LUCI_TITLE:=LuCI with HTTPS support (PolarSSL as SSL backend)
-LUCI_DEPENDS:=+luci +libustream-polarssl +px5g
+LUCI_TITLE:=LuCI with HTTPS support (mbedTLS as SSL backend)
+LUCI_DEPENDS:=+luci +libustream-mbedtls +px5g
include ../../luci.mk
option 'splash_prefix' '27'
option 'latitude' '52.52075'
option 'longitude' '13.40948'
+ option 'owm_api' 'http://util.berlin.freifunk.net'
config 'defaults' 'wifi_device'
option 'channel' '13'
config 'community' 'profile'
option 'name' 'Freifunk Potsdam'
option 'homepage' 'http://potsdam.freifunk.net'
- option 'ssid' 'www.freifunk-potsdam.de'
+ option 'ssid' 'Freifunk-Potsdam-XXX-YYY'
option 'mesh_network' '10.22.0.0/16'
option 'splash_network' '192.168.22.0/24'
option 'splash_prefix' '24'
option 'latitude' '52.39349'
option 'longitude' '13.06489'
+ option 'ipv6' '0'
+
+config 'defaults' 'interface'
+ option 'netmask' '255.255.0.0'
+ option 'dns' '85.214.20.141 213.73.91.35 194.150.168.168'
+ option 'delegate' '0'
config 'defaults' 'wifi_device'
option 'channel' '5'
+config 'defaults' 'wifi_device_5'
+ option 'channel' '44'
+
config 'defaults' 'bssidscheme'
option '5' '02:CA:FF:EE:BA:BE'
+ option '44' '02:CA:FF:EE:BA:BE'
-config 'defaults' 'interface'
- option 'dns' '85.214.20.141 213.73.91.35 194.150.168.168'
+config 'defaults' 'ssidscheme'
+ option '5' 'Mesh23'
+ option '44' 'Mesh23'
+
+config 'defaults' 'dhcp'
+ option 'leasetime' '15m'
+config 'defaults' 'olsrd'
+ option 'LinkQualityAlgorithm' 'etx_ffeth'
include $(TOPDIR)/rules.mk
PKG_NAME:=freifunk-common
-PKG_RELEASE:=1
+PKG_RELEASE:=3
PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
option 'bssid' '12:CA:FF:EE:BA:BE'
option 'mcast_rate' '6000'
-config 'defaults' 'madwifi_wifi_iface'
- option 'bgscan' '0'
- option 'sw_merge' '1'
- option 'probereq' '1'
- option 'mcast_rate' '5500'
-
config 'defaults' 'interface'
option 'netmask' '255.255.0.0'
option 'dns' '8.8.8.8 212.204.49.83 141.1.1.1'
for HOST in '127.0.0.1' '::1';do
json_init
- json_load "$(echo /links|nc ${HOST} 9090)"
+ json_load "$( echo /links | nc $HOST 9090 | sed -n '/^[}{ ]/p' )" # remove header/non-json
+
if json_is_a links array;then
json_select links
for v in ${VARS};do
include $(TOPDIR)/rules.mk
PKG_NAME:=meshwizard
-PKG_RELEASE:=0.3.2
+PKG_RELEASE:=0.3.3
PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
#!/bin/sh
# This script renames IB_wifi_ interface names into real interface names used on this system.
-# E.g. wireless.IB_wifi0 would become wireless.wifi0 on madwifi and wireless.radio0 on mac80211
+# E.g. wireless.IB_wifi0 would become wireless.radio0 on mac80211
. $dir/functions.sh
# create new wifi-iface for $net from defaults
set_defaults "wifi_iface_" wireless.$net\_iface
-# overwrite some settings for type atheros (madwifi)
-if [ "$type" = "atheros" ]; then
- set_defaults "madwifi_wifi_iface_" wireless.${net}
-fi
-
# overwrite defaults
bssid="$($dir/helpers/gen_bssid.sh $channel $community)"
exit 1
fi
-if [ "$type" = "atheros" ]; then
- exit 0
-elif [ "$type" = "mac80211" ]; then
+if [ "$type" = "mac80211" ]; then
# not hostapd[-mini], no VAP
if [ ! -x /usr/sbin/hostapd ]; then
echo "WARNING: hostapd[-mini] is required to be able to use VAP with mac80211."
+++ /dev/null
-#
-# Copyright (C) 2009 Jo-Philipp Wich <jow@openwrt.org>
-#
-# This is free software, licensed under the Apache 2.0 license.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=remote-update
-PKG_RELEASE:=4
-
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/remote-update
- SECTION:=luci
- CATEGORY:=LuCI
- SUBMENU:=9. Freifunk
- TITLE:=Freifunk remote update utility.
- DEPENDS:=@TARGET_atheros||@TARGET_ar71xx||@TARGET_brcm_2_4
-endef
-
-define Package/remote-update/description
- The freifunk remote-update utility uses sysupgrade to reflash the currently
- running firmware while keeping most of the existing configuratio.
-endef
-
-define Build/Prepare
- mkdir -p $(PKG_BUILD_DIR)
-endef
-
-define Build/Configure
-endef
-
-define Build/Compile
-endef
-
-define Package/remote-update/install
- $(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,remote-update))
+++ /dev/null
-#!/bin/sh
-
-local tempfile=/tmp/remote-upgrade.img
-local D2='\([0-9]\{2\}\)'
-local D4='\([0-9]\{4\}\)'
-local NL='
-'
-
-find_architecture()
-{
- local ifs="$IFS"; IFS="-"
- set -- $(opkg list_installed kernel)
- IFS="$ifs"
-
- echo "$3"
-}
-
-find_image()
-{
- case "$1" in
- atheros)
- echo "openwrt-atheros-combined.squashfs.img"
- ;;
- ar71xx)
- echo "openwrt-ar71xx-combined.squashfs.img"
- ;;
- brcm)
- echo "openwrt-brcm-2.4-squashfs.trx"
- ;;
- esac
-}
-
-check_image()
-{
- local file; for file in /lib/upgrade/*.sh; do . $file; done
- if platform_check_image "$1" >/dev/null 2>/dev/null; then
- return 0
- fi
- return 1
-}
-
-find_remote_checksum()
-{
- wget -qO- ${1%/*}/md5sums 2>/dev/null | \
- sed -ne '/'$2'/ { s/ .*//p }'
-}
-
-find_local_checksum()
-{
- set -- $(md5sum "$tempfile")
- echo $1
-}
-
-find_remote_info()
-{
- wget -qO- "${1%/*}/VERSION.txt" 2>/dev/null
-}
-
-find_remote_version()
-{
- find_remote_info "$1" | \
- sed -ne "s!.*$D4/$D2/$D2 $D2:$D2.*!\\1\\2\\3\\4\\5!p;t"
-}
-
-find_local_version()
-{
- if [ -f /rom/etc/banner ]; then
- sed -ne "s!.*$D4/$D2/$D2 $D2:$D2.*!\\1\\2\\3\\4\\5!p;t" \
- /rom/etc/banner
- else
- date +"%Y%m%d%H%M" -r /bin/sh
- fi
-}
-
-stop_service()
-{
- [ -x /etc/init.d/$1 ] && {
- echo -n "Stopping service $1 ... "
- /etc/init.d/$1 stop >/dev/null 2>/dev/null
- echo "done"
- }
-}
-
-do_wait()
-{
- if [ ${1:-0} -gt 0 ]; then
- echo -n "${2:-Waiting} "
- for i in $(seq 1 $1); do
- printf "%-2dseconds" $(($1-$i))
- sleep 1
- echo -en "\b\b\b\b\b\b\b\b\b"
- done
- echo "${NL}"
- fi
-}
-
-version_compare()
-{
- local v1="$1"
- local v2="$2"
-
- while [ -n "$v1" -o -n "$v2" ]; do
- if [ -z "${v2:0:4}" -o "${v1:0:4}" -gt "${v2:0:4}" ]; then
- return 1
- elif [ -z "${v1:0:4}" -o "${v1:0:4}" -lt "${v2:0:4}" ]; then
- return 2
- fi
-
- v1="${v1:4}"
- v2="${v2:4}"
- done
-
- return 0
-}
-
-usage()
-{
- cat <<EOT
-
-Usage:
- remote-update -h
- remote-update [-u <update url>] -c
- remote-update [-v] [-y] [-u <update url>] -w
- remote-update [-d] [-n] [-v] [-y] [-s <sleep seconds>] [-u <update url>]
-
-Actions:
- -h Display this help message and exit.
- -c Check for firmware update and exit.
- -w Fetch image and exit, do not perform flash write.
-
-Options:
- -d Do not detach from terminal.
- -n Do not backup configuration.
- -v Skip verification of downloaded image.
- -y Assume defaults for all questions.
-
- -s <seconds>
- Sleep given amount of seconds before starting flash write.
- If ommitted and '-y' is not used, 5 seconds are assumed.
-
- -u <url>
- Fetch firmware image from given url. A file "md5sums" is expected
- in the same remote directory. If there is no such file, use -v to
- suppress verification.
-
-EOT
-
- exit 1
-}
-
-
-while getopts "s:u:cdnvwyh" flag; do
- case $flag in
- s) sleeptime="$OPTARG";;
- u) updateurl="$OPTARG";;
- c) checkupdate=1;;
- d) nodetach=1;;
- n) nobackup=1;;
- v) noverify=1;;
- w) noflash=1;;
- y) noquestions=1;;
- *) usage;;
- esac
-done
-
-
-local image_url="$updateurl"
-local image_name="${image_url##*/}"
-
-[ -z "$image_url" ] && {
- local arch=$(find_architecture)
- local image=$(find_image "$arch")
- local repo=$(uci get freifunk.upgrade.repository 2>/dev/null)
- repo=${repo:-$(uci get system.upgrade.repository 2>/dev/null)}
-
- [ -z "$arch" ] && {
- echo "Can not determine the current architecture."
- exit 1
- }
-
- [ -z "$repo" ] && {
- echo "No repository configured in 'system.upgrade.repository'."
- echo "Use the '-u' flag to specify an image location."
- exit 1
- }
-
- [ -z "$image" ] && {
- echo "No suitable image for the '$arch' architecture."
- echo "Your platform is not supported."
- exit 1
- }
-
- echo "Architecture: $arch"
- echo "Repository: $repo"
-
- image_name="$image"
- image_url="${repo%/}/$arch/$image"
-}
-
-
-if [ "$checkupdate" = 1 ]; then
- local v1=$(find_local_version)
- local v2=$(find_remote_version "$image_url")
-
- [ -n "$v1" -a -n "$v2" ] && {
- version_compare "$v1" "$v2"
- [ $? == 2 ] && {
- echo "Update available!${NL}Local: $v1${NL}Remote: $v2${NL}--"
- find_remote_info "$image_url"
- exit 0
- } || {
- echo "Local version $v1 is up to date"
- exit 2
- }
- } || {
- echo "No remote time stamp found."
- exit 1
- }
-else
- if [ "$noquestions" != 1 ]; then
- echo -n "${NL}About to download $image_name. Continue? [y] "
- read answer
- case "$answer" in
- [nN]) exit 1;;
- esac
- fi
-
- echo -n "Downloading $image_name ... "
- rm -f $tempfile
- wget -qO $tempfile "$image_url" 2>/dev/null
- [ $? == 0 ] && echo done || {
- echo failed
- rm -f $tempfile
- exit 1
- }
-
- if [ "$noverify" != 1 ]; then
- echo -n "Verifying $image_name ... "
-
- local md5_remote=$(find_remote_checksum "$image_url" "$image_name")
- local md5_local=$(find_local_checksum)
-
- check_image "$tempfile"
- local image_ok=$?
-
- if [ $image_ok = 0 -a -n "$md5_remote" -a -n "$md5_local" -a "$md5_remote" = "$md5_local" ]; then
- echo "done"
- else
- if [ $image_ok != 0 ]; then
- echo "unsupported image type"
- else
- echo "checksum mismatch! (local:${md5_local:-(none)} remote:${md5_remote:-(none)})"
- fi
-
- local answer=n
- if [ "$noquestions" != 1 ]; then
- echo -n "${NL}Verification failed. Continue anyway? [n] "
- read answer
- fi
-
- case "$answer" in
- [yYjJ]*) : ;;
- *)
- echo "Aborting."
- rm -f $tempfile
- exit 1
- ;;
- esac
- fi
- fi
-
- if [ "$noflash" != 1 ]; then
- if [ -f "$tempfile" ]; then
- if [ "$noquestions" == 1 ]; then
- do_wait ${sleeptime:-5} "${NL}About to start flashing, hit <Ctrl-C> to abort!${NL}${NL}Starting in"
- else
- if [ -z "$nobackup" ]; then
- echo -n "${NL}Keep configuration files? [y] "
- read answer
- case "$answer" in
- [nN]) nobackup=1;;
- esac
- fi
-
- echo -n "${NL}About to start flashing!${NL}Hit <Enter> to continue or <Ctrl-C> to abort.${NL}"
- read answer
- fi
-
- for s in lucid collectd; do stop_service $s; done
-
- if [ "$nodetach" != 1 ]; then
- echo -n "Starting sysupgrade in background ... "
- /bin/busybox start-stop-daemon -S -b -x /sbin/sysupgrade -- ${nobackup:+-n} "$tempfile"
- echo "done"
- else
- echo "Executing sysupgrade ... "
- exec /sbin/sysupgrade ${nobackup:+-n} "$tempfile"
- fi
- else
- echo "No upgrade image found!"
- exit 1
- fi
- else
- echo "Image saved in '$tempfile'"
- fi
-fi
static int nixio_lstat(lua_State *L) {
nixio_stat_t buf;
- if (stat(luaL_checkstring(L, 1), &buf)) {
+ if (lstat(luaL_checkstring(L, 1), &buf)) {
return nixio__perror(L);
} else {
nixio__push_stat(L, &buf);
LUCI_LANG.hu=Magyar (Hungarian)
LUCI_LANG.it=Italiano (Italian)
LUCI_LANG.ja=日本語 (Japanese)
+LUCI_LANG.ko=한국어 (Korean)
LUCI_LANG.ms=Bahasa Melayu (Malay)
LUCI_LANG.no=Norsk (Norwegian)
LUCI_LANG.pl=Polski (Polish)
PKG_GITBRANCH?=$(if $(DUMP),x,$(strip $(shell \
variant="LuCI"; \
if git log -1 >/dev/null 2>/dev/null; then \
- branch="$$(git symbolic-ref --short -q HEAD 2>/dev/null)"; \
+ branch="$$(git branch --remote --verbose --no-abbrev --contains 2>/dev/null | \
+ sed -rne 's|^[^/]+/([^ ]+) [a-f0-9]{40} .+$$|\1|p' | head -n1)"; \
if [ "$$branch" != "master" ]; then \
variant="LuCI $$branch branch"; \
else \
LUCI_DEPENDS:=+lua +libuci-lua +luci-lib-nixio +luci-lib-ip +rpcd +libubus-lua +luci-lib-jsonc
PKG_SOURCE:=LuaSrcDiet-0.12.1.tar.bz2
-PKG_SOURCE_URL:=https://luasrcdiet.googlecode.com/files
-PKG_MD5SUM:=8a0812701e29b6715e4d76f2f118264a
+PKG_SOURCE_URL:=https://storage.googleapis.com/google-code-archive-downloads/v2/code.google.com/luasrcdiet
+PKG_MD5SUM:=ed7680f2896269ae8633756e7edcf09050812f78c8f49e280e63c30d14f35aea
HOST_BUILD_DIR:=$(BUILD_DIR_HOST)/LuaSrcDiet-0.12.1
define Package/luci-base/conffiles
/etc/luci-uploads
+/etc/config/luci
endef
include ../../luci.mk
return false;
},
+ 'ipmask': function()
+ {
+ return cbi_validators.ipmask4.apply(this) ||
+ cbi_validators.ipmask6.apply(this);
+ },
+
+ 'ipmask4': function()
+ {
+ var ip = this, mask = 32;
+
+ if (ip.match(/^(\S+)\/(\S+)$/))
+ {
+ ip = RegExp.$1;
+ mask = RegExp.$2;
+ }
+
+ if (!isNaN(mask) && (mask < 0 || mask > 32))
+ return false;
+
+ if (isNaN(mask) && !cbi_validators.ip4addr.apply(mask))
+ return false;
+
+ return cbi_validators.ip4addr.apply(ip);
+ },
+
+ 'ipmask6': function()
+ {
+ var ip = this, mask = 128;
+
+ if (ip.match(/^(\S+)\/(\S+)$/))
+ {
+ ip = RegExp.$1;
+ mask = RegExp.$2;
+ }
+
+ if (!isNaN(mask) && (mask < 0 || mask > 128))
+ return false;
+
+ if (isNaN(mask) && !cbi_validators.ip6addr.apply(mask))
+ return false;
+
+ return cbi_validators.ip6addr.apply(ip);
+ },
+
'port': function()
{
var p = Int(this);
}
}
- nodes = document.querySelectorAll('[data-type]');
-
- for (var i = 0, node; (node = nodes[i]) !== undefined; i++) {
- cbi_validate_field(node, node.getAttribute('data-optional') === 'true',
- node.getAttribute('data-type'));
- }
-
nodes = document.querySelectorAll('[data-choices]');
for (var i = 0, node; (node = nodes[i]) !== undefined; i++) {
cbi_dynlist_init(node, choices[2], choices[3], options);
}
+ nodes = document.querySelectorAll('[data-type]');
+
+ for (var i = 0, node; (node = nodes[i]) !== undefined; i++) {
+ cbi_validate_field(node, node.getAttribute('data-optional') === 'true',
+ node.getAttribute('data-type'));
+ }
+
cbi_d_update();
}
-- Copyright 2010 Jo-Philipp Wich <jow@openwrt.org>
+-- Copyright 2017 Dan Luedtke <mail@danrl.com>
-- Licensed to the public under the Apache License 2.0.
local fs = require "nixio.fs"
return ( val and val >= 0 and val <= 128 )
end
+function ipmask(val)
+ return ipmask4(val) or ipmask6(val)
+end
+
+function ipmask4(val)
+ local ip, mask = val:match("^([^/]+)/([^/]+)$")
+ local bits = tonumber(mask)
+
+ if bits and (bits < 0 or bits > 32) then
+ return false
+ end
+
+ if not bits and mask and not ip4addr(mask) then
+ return false
+ end
+
+ return ip4addr(ip or val)
+end
+
+function ipmask6(val)
+ local ip, mask = val:match("^([^/]+)/([^/]+)$")
+ local bits = tonumber(mask)
+
+ if bits and (bits < 0 or bits > 128) then
+ return false
+ end
+
+ if not bits and mask and not ip6addr(mask) then
+ return false
+ end
+
+ return ip6addr(ip or val)
+end
+
+function ip6hostid(val)
+ if val and val:match("^[a-fA-F0-9:]+$") and (#val > 2) then
+ return (ip6addr("2001:db8:0:0" .. val) or ip6addr("2001:db8:0:0:" .. val))
+ end
+
+ return false
+end
+
function port(val)
val = tonumber(val)
return ( val and val >= 0 and val <= 65535 )
end
end
+function hexstring(val)
+ if val then
+ return (val:match("^[a-fA-F0-9]+$") ~= nil)
+ end
+ return false
+end
+
+function hex(val, maxbytes)
+ maxbytes = tonumber(maxbytes)
+ if val and maxbytes ~= nil then
+ return ((val:match("^0x[a-fA-F0-9]+$") ~= nil) and (#val <= 2 + maxbytes * 2))
+ end
+ return false
+end
+
+function base64(val)
+ if val then
+ return (val:match("^[a-zA-Z0-9/+]+=?=?$") ~= nil) and (math.fmod(#val, 4) == 0)
+ end
+ return false
+end
+
function string(val)
return true -- Everything qualifies as valid string
end
-function directory( val, seen )
+function directory(val, seen)
local s = fs.stat(val)
seen = seen or { }
return false
end
-function file( val, seen )
+function file(val, seen)
local s = fs.stat(val)
seen = seen or { }
return false
end
-function device( val, seen )
+function device(val, seen)
local s = fs.stat(val)
seen = seen or { }
return false;
end
- local days_in_month = { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }
-
- local function is_leap_year(year)
- return (year % 4 == 0) and ((year % 100 ~= 0) or (year % 400 == 0))
- end
-
- function get_days_in_month(month, year)
- if (month == 2) and is_leap_year(year) then
- return 29
- else
- return days_in_month[month]
- end
- end
- if (year < 2015) then
- return false
- end
- if ((month == 0) or (month > 12)) then
- return false
- end
- if ((day == 0) or (day > get_days_in_month(month, year))) then
- return false
- end
- return true
+ local days_in_month = { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }
+
+ local function is_leap_year(year)
+ return (year % 4 == 0) and ((year % 100 ~= 0) or (year % 400 == 0))
+ end
+
+ function get_days_in_month(month, year)
+ if (month == 2) and is_leap_year(year) then
+ return 29
+ else
+ return days_in_month[month]
+ end
+ end
+ if (year < 2015) then
+ return false
+ end
+ if ((month == 0) or (month > 12)) then
+ return false
+ end
+ if ((day == 0) or (day > get_days_in_month(month, year))) then
+ return false
+ end
+ return true
end
return false
end
-
return dns
end
+function protocol.ip6prefix(self)
+ local prefix = self:_ubus("ipv6-prefix")
+ if prefix and #prefix > 0 then
+ return "%s/%d" %{ prefix[1].address, prefix[1].mask }
+ end
+end
+
function protocol.is_bridge(self)
return (not self:is_virtual() and self:type() == "bridge")
end
local t = "Generic"
if self.iwinfo.type == "wl" then
t = "Broadcom"
- elseif self.iwinfo.type == "madwifi" then
- t = "Atheros"
end
local m = ""
self._family = (tonumber(family) == 6) and 6 or 4
self._rules = { }
self._chains = { }
+ self._tables = { }
+
+ local t = self._tables
+ local s = self:_supported_tables(self._family)
+
+ if s.filter then t[#t+1] = "filter" end
+ if s.nat then t[#t+1] = "nat" end
+ if s.mangle then t[#t+1] = "mangle" end
+ if s.raw then t[#t+1] = "raw" end
if self._family == 4 then
self._nulladdr = "0.0.0.0/0"
- self._tables = { "filter", "nat", "mangle", "raw" }
self._command = "iptables -t %s --line-numbers -nxvL"
else
self._nulladdr = "::/0"
- self._tables = { "filter", "mangle", "raw" }
- local ok, lines = pcall(io.lines, "/proc/net/ip6_tables_names")
- if ok and lines then
- local line
- for line in lines do
- if line == "nat" then
- self._tables = { "filter", "nat", "mangle", "raw" }
- end
- end
- end
self._command = "ip6tables -t %s --line-numbers -nxvL"
end
self:_parse_rules()
end
+function IptParser._supported_tables( self, family )
+ local tables = { }
+ local ok, lines = pcall(io.lines,
+ (family == 6) and "/proc/net/ip6_tables_names"
+ or "/proc/net/ip_tables_names")
+
+ if ok and lines then
+ local line
+ for line in lines do
+ tables[line] = true
+ end
+ end
+
+ return tables
+end
+
-- search criteria as only argument. If args is nil or an empty table then all
-- rules will be returned.
--
break
else
local ts, mac, ip, name, duid = ln:match("^(%d+) (%S+) (%S+) (%S+) (%S+)")
+ local expire = tonumber(ts) or 0
if ts and mac and ip and name and duid then
if family == 4 and not ip:match(":") then
rv[#rv+1] = {
- expires = os.difftime(tonumber(ts) or 0, os.time()),
+ expires = (expire ~= 0) and os.difftime(expire, os.time()),
macaddr = mac,
ipaddr = ip,
hostname = (name ~= "*") and name
}
elseif family == 6 and ip:match(":") then
rv[#rv+1] = {
- expires = os.difftime(tonumber(ts) or 0, os.time()),
+ expires = (expire ~= 0) and os.difftime(expire, os.time()),
ip6addr = ip,
duid = (duid ~= "*") and duid,
hostname = (name ~= "*") and name
hostname = (name ~= "-") and name
}
elseif ip and iaid == "ipv4" and family == 4 then
+ local mac, mac1, mac2, mac3, mac4, mac5, mac6
+ if duid and type(duid) == "string" then
+ mac1, mac2, mac3, mac4, mac5, mac6 = duid:match("^(%x%x)(%x%x)(%x%x)(%x%x)(%x%x)(%x%x)$")
+ end
+ if not (mac1 and mac2 and mac3 and mac4 and mac5 and mac6) then
+ mac = "FF:FF:FF:FF:FF:FF"
+ else
+ mac = mac1..":"..mac2..":"..mac3..":"..mac4..":"..mac5..":"..mac6
+ end
rv[#rv+1] = {
expires = (expire >= 0) and os.difftime(expire, os.time()),
macaddr = duid,
+ macaddr = mac:lower(),
ipaddr = ip,
hostname = (name ~= "-") and name
}
if net.l3_device == iface or net.device == iface then
-- cross check with uci to filter out @name style aliases
local uciname = cur:get("network", net.interface, "ifname")
- if not uciname or uciname:sub(1, 1) ~= "@" then
+ if type(uciname) == "string" and uciname:sub(1,1) ~= "@" or uciname then
return net.interface
end
end
<% if self.allowlocal then %>
<li style="padding:0.5em">
<input class="cbi-input-radio" data-update="click change"<%=attr("type", self.widget or "radio") .. attr("id", cbid .. "_empty") .. attr("name", cbid) .. attr("value", "") .. ifattr(checked[""], "checked", "checked")%> />  
+ <label<%=attr("for", cbid .. "_empty")%>></label>
<label<%=attr("for", cbid .. "_empty")%> style="background-color:<%=fwm.zone.get_color()%>" class="zonebadge">
<strong><%:Device%></strong>
<% if self.allowany and self.allowlocal then %>(<%:input%>)<% end %>
<% if self.allowany then %>
<li style="padding:0.5em">
<input class="cbi-input-radio" data-update="click change"<%=attr("type", self.widget or "radio") .. attr("id", cbid .. "_any") .. attr("name", cbid) .. attr("value", "*") .. ifattr(checked["*"], "checked", "checked")%> />  
+ <label<%=attr("for", cbid .. "_any")%>></label>
<label<%=attr("for", cbid .. "_any")%> style="background-color:<%=fwm.zone.get_color()%>" class="zonebadge">
<strong><%:Any zone%></strong>
<% if self.allowany and self.allowlocal then %>(<%:forward%>)<% end %>
%>
<li style="padding:0.5em">
<input class="cbi-input-radio" data-update="click change"<%=attr("type", self.widget or "radio") .. attr("id", cbid .. "." .. zone:name()) .. attr("name", cbid) .. attr("value", zone:name()) .. ifattr(checked[zone:name()], "checked", "checked")%> />  
+ <label<%=attr("for", cbid .. "." .. zone:name())%>></label>
<label<%=attr("for", cbid .. "." .. zone:name())%> style="background-color:<%=zone:get_color()%>" class="zonebadge">
<strong><%=zone:name()%>:</strong>
<%
<% if self.widget ~= "checkbox" and not self.nocreate then %>
<li style="padding:0.5em">
<input class="cbi-input-radio" data-update="click change" type="radio"<%=attr("id", cbid .. "_new") .. attr("name", cbid) .. attr("value", "-") .. ifattr(not selected, "checked", "checked")%> />  
+ <label<%=attr("for", cbid .. "_new")%>></label>
<div onclick="document.getElementById('<%=cbid%>_new').checked=true" class="zonebadge" style="background-color:<%=fwm.zone.get_color()%>">
<em><%:unspecified -or- create:%> </em>
<input type="text"<%=attr("name", cbid .. ".newzone") .. ifattr(not selected, "value", luci.http.formvalue(cbid .. ".newzone") or self.default)%> onfocus="document.getElementById('<%=cbid%>_new').checked=true" />
attr("id", cbid) .. attr("name", cbid) .. attr("value", self.enabled or 1) ..
ifattr((self:cfgvalue(section) or self.default) == self.enabled, "checked", "checked")
%> />
+ <label<%= attr("for", cbid)%>></label>
<%+cbi/valuefooter%>
<div>
<% for i, key in pairs(self.keylist) do %>
<label<%=
- attr("id", cbid.."-"..key) ..
attr("data-index", i) ..
attr("data-depends", self:deplist2json(section, self.deplist[i]))
%>>
<input class="cbi-input-radio" data-update="click change" type="radio"<%=
+ attr("id", cbid.."-"..key) ..
attr("name", cbid) ..
attr("value", key) ..
ifattr((self:cfgvalue(section) or self.default) == key, "checked", "checked")
%> />
+ <label<%= attr("for", cbid.."-"..key)%>></label>
<%=pcdata(self.vallist[i])%>
</label>
<% if i == self.size then write(br) end %>
<div>
<% for i, key in pairs(self.keylist) do %>
<label<%=
- attr("id", cbid.."-"..key) ..
attr("data-index", i) ..
attr("data-depends", self:deplist2json(section, self.deplist[i]))
%>>
<input class="cbi-input-checkbox" type="checkbox" data-update="click change"<%=
+ attr("id", cbid.."-"..key) ..
attr("name", cbid) ..
attr("value", key) ..
ifattr(luci.util.contains(v, key), "checked", "checked")
%> />
+ <label<%= attr("for", cbid.."-"..key)%>></label>
<%=pcdata(self.vallist[i])%>
</label>
- <% if i == self.size then write('<br />') end %>
+ <% if self.size and (i % self.size) == 0 then write('<br />') end %>
<% end %>
</div>
<% end %>
attr("id", cbid .. "." .. iface:name()) ..
attr("name", cbid) .. attr("value", iface:name()) ..
ifattr(checked[iface:name()], "checked", "checked")
- %> />  
+ %> />
+ <%- if not self.widget or self.widget == "checkbox" or self.widget == "radio" then -%>
+ <label<%=attr("for", cbid .. "." .. iface:name())%>></label>
+ <%- end -%>
+  
<label<%=attr("for", cbid .. "." .. iface:name())%>>
<% if link then -%><a href="<%=link%>"><% end -%>
<img<%=attr("title", iface:get_i18n())%> style="width:16px; height:16px; vertical-align:middle" src="<%=resource%>/icons/<%=iface:type()%><%=iface:is_up() and "" or "_disabled"%>.png" />
attr("id", cbid .. "_custom") ..
attr("name", cbid) ..
attr("value", " ")
- %> />  
+ %> />
+ <%- if not self.widget or self.widget == "checkbox" or self.widget == "radio" then -%>
+ <label<%=attr("for", cbid .. "_custom")%>></label>
+ <%- end -%>
+  
<label<%=attr("for", cbid .. "_custom")%>>
<img title="<%:Custom Interface%>" style="width:16px; height:16px; vertical-align:middle" src="<%=resource%>/icons/ethernet_disabled.png" />
<%:Custom Interface%>:
<% if not self.nocreate then %>
<li style="padding:0.25em 0">
<input class="cbi-input-<%=self.widget or "radio"%>" data-update="click change"<%=attr("type", self.widget or "radio") .. attr("id", cbid .. "_new") .. attr("name", cbid) .. attr("value", "-") .. ifattr(not value and self.widget ~= "checkbox", "checked", "checked")%> />  
+ <%- if not self.widget or self.widget == "checkbox" or self.widget == "radio" then -%>
+ <label<%=attr("for", cbid .. "_new")%>></label>
+ <%- end -%>
<div style="padding:0.5em; display:inline">
<label<%=attr("for", cbid .. "_new")%>><em>
<%- if self.widget == "checkbox" then -%>
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Càrrega d'1 minut:"
msgid "15 Minute Load:"
msgstr "Càrrega de 15 minuts:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "Càrrega de 5 minuts:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "Suport AR"
-
msgid "ARP retry threshold"
msgstr "Llindar de reintent ARP"
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr "Permet respostes del rang 127.0.0.0/8, p.e. per serveis RBL"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Estacions associades"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Controlador sense fils d'Atheros 802.11%s"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Autenticació"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Autoritzada"
msgid "Back to scan results"
msgstr "Enrere als resultats de l'escaneig"
-msgid "Background Scan"
-msgstr "Escaneig de fons"
-
msgid "Backup / Flash Firmware"
msgstr "Còpia de seguretat / Recàrrega de programari"
"en els fitxers de configuració canviats i marcats per l'opkg, fitxers base "
"essencials i els patrons de còpia de seguretat definits per l'usuari."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Velocitat de bits"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Suma de verificació"
msgid "Common Configuration"
msgstr "Configuració comuna"
-msgid "Compression"
-msgstr "Compressió"
-
msgid "Configuration"
msgstr "Configuració"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Inhabilita el temporitzador HW-Beacon"
-
msgid "Disabled"
msgstr "Inhabilitat"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "Descarta les respostes RFC1918 des de dalt"
msgid "Do not forward reverse lookups for local networks"
msgstr ""
-msgid "Do not send probe responses"
-msgstr "No enviïs les respostes de prova"
-
msgid "Domain required"
msgstr "Es requereix un domini"
msgid "Domain whitelist"
msgstr ""
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr ""
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "Habilita negociació IPv6 en la enllaç PPP"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr ""
msgid "Enabled"
msgstr "Habilitat"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "Habilita l'Spanning Tree Protocol a aquest pont"
msgid "Encryption"
msgstr "Encriptació"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "Esborrant..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr ""
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Fast Frames"
-
msgid "File"
msgstr "Fitxer"
msgid "Firewall"
msgstr "Tallafocs"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Ajusts de tallafocs"
msgid "Free space"
msgstr "Espai lliure"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "GHz"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr ""
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "Adreça IP"
msgid "IPv4-Address"
msgstr "Adreça IPv6"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr "Adreça IPv6"
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6-en-IPv4 (RFC4213)"
"Sembla que intentes actualitzar una imatge que no hi cap a la memòria flaix, "
"si us plau verifica el fitxer d'imatge!"
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr "Es requereix JavaScript!"
msgid "Join Network"
"requests to"
msgstr ""
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Velocitat màxima"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr ""
msgid "Metric"
msgstr "Mètric"
-msgid "Minimum Rate"
-msgstr "Velocitat mínima"
-
msgid "Minimum hold time"
msgstr ""
msgid "Missing protocol extension for proto %q"
msgstr "Manca l'extensió de protocol del protocol %q"
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Mode"
msgid "Move up"
msgstr "Puja"
-msgid "Multicast Rate"
-msgstr "Velocitat de difusió selectiva"
-
msgid "Multicast address"
msgstr "Adreça de difusió selectiva"
msgid "Option removed"
msgstr "Opció treta"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Opcions"
msgid "Outbound:"
msgstr "Sortint:"
-msgid "Outdoor Channels"
-msgstr "Canals d'exteriors"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr ""
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr "PIN"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP"
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "Executa un reinici"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr "Velocitat física:"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr ""
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "continua"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Pseudo Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr "Calidad"
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr ""
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr ""
msgid "Receiver Antenna"
msgstr "Antena receptora"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "Reconnex aquesta interfície"
msgid "References"
msgstr "Referències"
-msgid "Regulatory Domain"
-msgstr "Domini regulatori"
-
msgid "Relay"
msgstr "Relé"
msgid "Remote IPv4 address"
msgstr "Adreça IPv6 remota"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Treu"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "Alguns ISP ho requereixen, per exemple el Charter amb DOCSIS 3"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Clients separats"
-msgid "Separate WDS"
-msgstr "WDS separat"
-
msgid "Server Settings"
msgstr "Ajusts de servidor"
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
msgid "Sort"
"dead"
msgstr ""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "Especifiqueu el clau de xifració secret aquí."
msgid "Static Routes"
msgstr "Rutes estàtiques"
-msgid "Static WDS"
-msgstr "WDS estàtic"
-
msgid "Static address"
msgstr "Adreça estàtica"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
msgid "The length of the IPv6 prefix in bits"
msgstr "La longitud del prefix IPv6 en bits"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Mode Turbo"
-
msgid "Tx-Power"
msgstr "Potència Tx"
msgid "USB Device"
msgstr "Dispositiu USB"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "UUID"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
msgid "Upload archive..."
msgid "Used Key Slot"
msgstr ""
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "Sense fils"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "Suport XR"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"dispositiu pot resultar inaccessible!</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
-"Has d'activar el Java Script al teu navegador o LuCI no funcionarà "
+"Has d'activar el JavaScript al teu navegador o LuCI no funcionarà "
"correctament."
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "etiquetat"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "desconegut"
msgid "« Back"
msgstr "« Enrere"
+#~ msgid "AR Support"
+#~ msgstr "Suport AR"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Controlador sense fils d'Atheros 802.11%s"
+
+#~ msgid "Background Scan"
+#~ msgstr "Escaneig de fons"
+
+#~ msgid "Compression"
+#~ msgstr "Compressió"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Inhabilita el temporitzador HW-Beacon"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "No enviïs les respostes de prova"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Fast Frames"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Velocitat màxima"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Velocitat mínima"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Velocitat de difusió selectiva"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Canals d'exteriors"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Domini regulatori"
+
+#~ msgid "Separate WDS"
+#~ msgstr "WDS separat"
+
+#~ msgid "Static WDS"
+#~ msgstr "WDS estàtic"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Mode Turbo"
+
+#~ msgid "XR Support"
+#~ msgstr "Suport XR"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "Es crearà una xarxa addicional si deixes això sense marcar."
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Zatížení za 1 minutu:"
msgid "15 Minute Load:"
msgstr "Zatížení za 15 minut:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "Zatížení za 5 minut:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "Podpora AR"
-
msgid "ARP retry threshold"
msgstr "ARP limit opakování"
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr "Povolit upstream odpovědi na 127.0.0.0/8 rozsah, např. pro RBL služby"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Připojení klienti"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Atheros 802.11%s bezdrátový ovladač"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Autentizace"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Autoritativní"
msgid "Back to scan results"
msgstr "Zpět k výsledkům vyhledávání"
-msgid "Background Scan"
-msgstr "Vyhledávat na pozadí"
-
msgid "Backup / Flash Firmware"
msgstr "Zálohovat / nahrát firmware"
"souborů označených opkg, nezbyných systémových souborů a souborů "
"vyhovujících uživatelem určeným vzorům."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Přenosová rychlost"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Kontrolní součet"
msgid "Common Configuration"
msgstr "Společná nastavení"
-msgid "Compression"
-msgstr "Komprese"
-
msgid "Configuration"
msgstr "Nastavení"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Zakázat HW-Beacon časovač"
-
msgid "Disabled"
msgstr "Zakázáno"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "Vyřadit upstream RFC1918 odpovědi"
msgid "Do not forward reverse lookups for local networks"
msgstr "Nepřeposílat reverzní dotazy na místní sítě"
-msgid "Do not send probe responses"
-msgstr "Neodpovídat na vyhledávání"
-
msgid "Domain required"
msgstr "Vyžadována doména"
msgid "Domain whitelist"
msgstr "Whitelist domén"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr "Povolit dynamickou aktualizaci koncového bodu HE.net"
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "Na PPP spoji povolit vyjednání IPv6"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "Povolit tento přípojný bod"
msgid "Enabled"
msgstr "Povoleno"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "Na tomto síťovém mostě povolit Spanning Tree Protocol"
msgid "Encryption"
msgstr "Šifrování"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "Odstraňování..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr "Externí protokolovací server"
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Rychlé rámce"
-
msgid "File"
msgstr "Soubor"
msgid "Firewall"
msgstr "Firewall"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Nastavení firewallu"
msgid "Free space"
msgstr "Volné místo"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "GHz"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "Handler"
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "IP adresy"
msgid "IPv4-Address"
msgstr "IPv4 adresa"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr "IPv6 adresa"
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6-in-IPv4 (RFC4213)"
"Zdá se, že se pokoušíte zapsat obraz, který se nevejde do flash paměti. "
"Prosím ověřte soubor s obrazem!"
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr "Vyžadován JavaScript!"
msgid "Join Network"
"Seznam <abbr title=\"Domain Name System\">DNS</abbr> serverů, na které "
"přeposílat požadavky"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
"Poslouchat pouze na daném rozhraní, nebo pokud není specifikováno, na všech"
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Nejvyšší míra"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr "Nejvyšší povolené množství aktivních DHCP zápůjček"
msgid "Metric"
msgstr "Metrika"
-msgid "Minimum Rate"
-msgstr "Nejnižší hodnota"
-
msgid "Minimum hold time"
msgstr "Minimální čas zápůjčky"
msgid "Missing protocol extension for proto %q"
msgstr "Chybějící rozšíření protokolu %q"
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Mód"
msgid "Move up"
msgstr "Přesunout nahoru"
-msgid "Multicast Rate"
-msgstr "Hodnota vícesměrového vysílání"
-
msgid "Multicast address"
msgstr "Adresa vícesměrového vysílání"
msgid "Option removed"
msgstr "Volba odstraněna"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Možnosti"
msgid "Outbound:"
msgstr "Odchozí:"
-msgid "Outdoor Channels"
-msgstr "Venkovní kanály"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr "Přepsat MTU"
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr "PIN"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP"
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "Provést reset"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr "Fyzická rychlost:"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Prism2/2.5/3 802.11b Wireless Controller"
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Pokračovat"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Pseudo Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr "Kvalita"
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr "Wireless v reálném čase"
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr "Opětovné nastavení ochrany"
msgid "Receiver Antenna"
msgstr "Přijímací anténa"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "Přepojit toto rozhraní"
msgid "References"
msgstr "Reference"
-msgid "Regulatory Domain"
-msgstr "Doména regulátora"
-
msgid "Relay"
msgstr "Přenos"
msgid "Remote IPv4 address"
msgstr "Vzdálená IPv4 adresa"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Odstranit"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
# Charter je poskytovate
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "Vyžadováno u některých ISP, např. Charter s DocSIS 3"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Oddělovat klienty"
-msgid "Separate WDS"
-msgstr "Oddělovat WDS"
-
msgid "Server Settings"
msgstr "Nastavení serveru"
msgid "Sorry, the server encountered an unexpected error."
msgstr "Omlouváme se, na serveru došlo k neočekávané vyjímce."
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
"Omlouváme se, ale v tomto zařízení není přítomná podpora pro upgrade "
"systému. Nový obraz firmwaru musí být zapsán ručně. Prosím, obraťte se na "
-"OpenWRT wiki pro zařízení specifické instalační instrukce."
+"wiki pro zařízení specifické instalační instrukce."
msgid "Sort"
msgstr "Seřadit"
"dead"
msgstr "Určuje počet sekund, po kterém je hostitel považovám za mrtvého"
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "Zde nastavte soukromý šifrovací klíč."
msgid "Static Routes"
msgstr "Statické trasy"
-msgid "Static WDS"
-msgstr "Statický WDS"
-
msgid "Static address"
msgstr "Statická adresa"
"configurations where only hosts with a corresponding lease are served."
msgstr ""
"Statické zápůjčky se používají pro přiřazení fixních IP adres a symbolických "
-"jmen DHCP klientům. Jsou také vyžadvány pro nedynamické konfigurace "
+"jmen DHCP klientům. Jsou také vyžadovány pro nedynamické konfigurace "
"rozhraní, kde jsou povoleni pouze hosté s odpovídajícím nastavením."
msgid "Status"
msgstr "Odeslat"
msgid "Suppress logging"
-msgstr ""
+msgstr "Potlačit logování"
msgid "Suppress logging of the routine operation of these protocols"
msgstr ""
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr "IPv6 prefix přidělený poskytovatelm většinou končí <code>::</code>"
msgid "The length of the IPv6 prefix in bits"
msgstr "Délka IPv6 prefixu v bitech"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
"abbr> in the local network"
msgstr ""
-"Toto je jedný <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>v mistní síti"
+"Toto je jed
iný <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
+"abbr> v mistní síti"
msgid "This is the plain username for logging into the account"
msgstr ""
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Turbo mód"
-
msgid "Tx-Power"
msgstr "Tx-Power"
msgid "USB Device"
msgstr "USB zařízení"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "UUID"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
"Nahrát obraz pro upgrade systému, jímž bude přepsán běžící firmware. "
"Zkontrolujte \"Keep settings\" za účelem udržení aktuální konfigurace "
-"(vyžaduje obraz OpenWrt kompatabilního firmwaru)."
+"(vyžaduje obraz kompatabilního firmwaru)."
msgid "Upload archive..."
msgstr "Nahrát archiv..."
msgid "Used Key Slot"
msgstr ""
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "Bezdrátová síť"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "Podpora XR"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"\"network\", vaše zařízení se může stát nepřístupným!</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
-"Aby LuCI fungoval správně, musíte mít v prohlížeči povolený Javascript."
+"Aby LuCI fungoval správně, musíte mít v prohlížeči povolený JavaScript."
msgid ""
"Your Internet Explorer is too old to display this page correctly. Please "
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "označený"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "neznámý"
msgid "« Back"
msgstr "« Zpět"
+#~ msgid "AR Support"
+#~ msgstr "Podpora AR"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Atheros 802.11%s bezdrátový ovladač"
+
+#~ msgid "Background Scan"
+#~ msgstr "Vyhledávat na pozadí"
+
+#~ msgid "Compression"
+#~ msgstr "Komprese"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Zakázat HW-Beacon časovač"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Neodpovídat na vyhledávání"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Rychlé rámce"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Nejvyšší míra"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Nejnižší hodnota"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Hodnota vícesměrového vysílání"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Venkovní kanály"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Doména regulátora"
+
+#~ msgid "Separate WDS"
+#~ msgstr "Oddělovat WDS"
+
+#~ msgid "Static WDS"
+#~ msgstr "Statický WDS"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Turbo mód"
+
+#~ msgid "XR Support"
+#~ msgstr "Podpora XR"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "Pokud není zaškrtnuto, bude vytvořena dodatečná síť."
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-05-26 17:57+0200\n"
-"PO-Revision-Date: 2013-03-29 12:13+0200\n"
+"PO-Revision-Date: 2017-03-06 11:15+0200\n"
"Last-Translator: JoeSemler <josef.semler@gmail.com>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: de\n"
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Systemlast (1 Minute):"
msgid "15 Minute Load:"
msgstr "Systemlast (15 Minuten):"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "Systemlast (5 Minuten):"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "AR-Unterstützung"
-
msgid "ARP retry threshold"
msgstr "Grenzwert für ARP-Auflösungsversuche"
"Allocate IP addresses sequentially, starting from the lowest available "
"address"
msgstr ""
+"IP-Adressen sequenziell vergeben, beginnend mit der kleinsten "
+"verfügbaren Adresse"
msgid "Allocate IP sequentially"
-msgstr ""
+msgstr "IPs sequenziell vergeben"
msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
msgstr "Erlaube Anmeldung per Passwort"
"Dies erlaubt DNS-Antworten im 127.0.0.0/8 Bereich der z.B. für RBL Dienste "
"genutzt wird"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Assoziierte Clients"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Atheros 802.11%s W-LAN Adapter"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Authentifizierung"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Authoritativ"
msgid "Back to scan results"
msgstr "Zurück zu den Scan-Ergebnissen"
-msgid "Background Scan"
-msgstr "Hintergrundscan"
-
msgid "Backup / Flash Firmware"
msgstr "Backup / Firmware Update"
"markierten Konfigurationsdateien. Des Weiteren sind die durch "
"benutzerdefinierte Dateiemuster betroffenen Dateien enthalten."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Bitrate"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Prüfsumme"
msgid "Common Configuration"
msgstr "Allgemeine Konfiguration"
-msgid "Compression"
-msgstr "Kompression"
-
msgid "Configuration"
msgstr "Konfiguration"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Deaktiviere Hardware-Beacon Zeitgeber"
-
msgid "Disabled"
msgstr "Deaktiviert"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "Eingehende RFC1918-Antworten verwerfen"
msgid "Do not forward reverse lookups for local networks"
msgstr "Keine Rückwärtsauflösungen für lokale Netzwerke weiterleiten"
-msgid "Do not send probe responses"
-msgstr "Scan-Anforderungen nicht beantworten"
-
msgid "Domain required"
msgstr "Anfragen nur mit Domain"
msgid "Domain whitelist"
msgstr "Domain-Whitelist"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr "Dynamisches HE.net IP-Adress-Update aktivieren"
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "Aushandeln von IPv6-Adressen auf der PPP-Verbindung aktivieren"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "Diesen Mountpunkt aktivieren"
msgid "Enabled"
msgstr "Aktiviert"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "Aktiviert das Spanning Tree Protokoll auf dieser Netzwerkbrücke"
msgid "Encryption"
msgstr "Verschlüsselung"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "Lösche..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr "Externer Protokollserver IP"
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Schnelle Frames"
-
msgid "File"
msgstr "Datei"
msgid "Firewall"
msgstr "Firewall"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Firewall Einstellungen"
msgid "Free space"
msgstr "Freier Platz"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "GHz"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "Handler"
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "IP-Adresse"
msgid "IPv4-Address"
msgstr "IPv4-Adresse"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr "IPv6-Adresse"
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6-in-IPv4 (RFC4213)"
"Das verwendete Image scheint zu groß für den internen Flash-Speicher zu "
"sein. Überprüfen Sie die Imagedatei!"
-msgid "Java Script required!"
-msgstr "Java-Script benötigt!"
+msgid "JavaScript required!"
+msgstr "JavaScript benötigt!"
msgid "Join Network"
msgstr "Netzwerk beitreten"
"Liste von <abbr title=\"Domain Name System\">DNS</abbr>-Servern an welche "
"Requests weitergeleitet werden"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
"Nur auf die gegebene Schnittstelle reagieren, nutze alle wenn nicht "
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Höchstübertragungsrate"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr "Maximal zulässige Anzahl von aktiven DHCP-Leases"
msgid "Metric"
msgstr "Metrik"
-msgid "Minimum Rate"
-msgstr "Mindestübertragungsrate"
-
msgid "Minimum hold time"
msgstr "Minimalzeit zum Halten der Verbindung"
msgid "Missing protocol extension for proto %q"
msgstr "Erweiterung für Protokoll %q fehlt"
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Modus"
msgid "Move up"
msgstr "Nach oben schieben"
-msgid "Multicast Rate"
-msgstr "Multicastrate"
-
msgid "Multicast address"
msgstr "Multicast-Adresse"
msgid "Option removed"
msgstr "Option entfernt"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Optionen"
msgid "Outbound:"
msgstr "Ausgehend:"
-msgid "Outdoor Channels"
-msgstr "Funkkanal für den Ausseneinsatz"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr "MTU-Wert überschreiben"
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr "PIN"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP"
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "Reset durchführen"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr "Phy-Rate:"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Prism2/2.5/3 802.11b W-LAN Adapter"
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Fortfahren"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Pseudo Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr "Qualität"
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr "Echtzeit-WLAN-Signal"
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr "DNS-Rebind-Schutz"
msgid "Receiver Antenna"
msgstr "Empfangsantenne"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "Diese Schnittstelle neu verbinden"
msgid "References"
msgstr "Verweise"
-msgid "Regulatory Domain"
-msgstr "Geltungsbereich (Regulatory Domain)"
-
msgid "Relay"
msgstr "Relay"
msgid "Remote IPv4 address"
msgstr "Entfernte IPv4-Adresse"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Entfernen"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
"Wird von bestimmten Internet-Providern benötigt, z.B. Charter mit DOCSIS 3"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Clients isolieren"
-msgid "Separate WDS"
-msgstr "Separates WDS"
-
msgid "Server Settings"
msgstr "Servereinstellungen"
msgstr ""
"Entschuldigung, auf dem Server ist ein unerwarteter Fehler aufgetreten."
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
"Aufgrund des fehlenden sysupgrade-Supports muss die neue Firmware manuell "
-"geflasht werden. Weitere Informationen sowie gerätespezifische "
-"Installationsanleitungen entnehmen Sie bitte dem OpenWrt Wiki."
+"geflasht werden. Weitere Informationen sowie gerätespezifische "
+"Installationsanleitungen entnehmen Sie bitte dem Wiki."
msgid "Sort"
msgstr "Sortieren"
"Spezifiziert die maximale Anzahl an Sekunde nach denen Hoss als tot erachtet "
"werden"
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "Geben Sie hier den geheimen Netzwerkschlüssel an"
msgid "Static Routes"
msgstr "Statische Routen"
-msgid "Static WDS"
-msgstr "Statisches WDS"
-
msgid "Static address"
msgstr "Statische Adresse"
msgstr "Absenden"
msgid "Suppress logging"
-msgstr ""
+msgstr "Logeinträge unterdrücken"
msgid "Suppress logging of the routine operation of these protocols"
msgstr ""
+"Logeinträge für erfolgreiche Operationen dieser Protokolle unterdrücken"
msgid "Swap"
msgstr ""
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
"Vom Provider zugewiesener IPv6 Präfix, endet normalerweise mit <code>::</"
msgid "The length of the IPv6 prefix in bits"
msgstr "Länge des IPv6 Präfix in Bits"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Turbo Modus"
-
msgid "Tx-Power"
msgstr "Sendestärke"
msgid "USB Device"
msgstr "USB-Gerät"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "UUID"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
"Zum Ersetzen der aktuellen Firmware kann hier ein sysupgrade-Kompatibles "
"Image hochgeladen werden. Wenn die vorhandene Konfiguration auch nach dem "
msgid "Used Key Slot"
msgstr "Benutzer Schlüsselindex"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "WLAN"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "XR-Unterstützung"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"werden könnte das Gerät unerreichbar werden!</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
-"Im Browser muss Java-Script aktiviert sein oder LuCI wird nicht richtig "
+"Im Browser muss JavaScript aktiviert sein oder LuCI wird nicht richtig "
"funktionieren."
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "tagged"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "unbekannt"
msgid "« Back"
msgstr "« Zurück"
+#~ msgid "AR Support"
+#~ msgstr "AR-Unterstützung"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Atheros 802.11%s W-LAN Adapter"
+
+#~ msgid "Background Scan"
+#~ msgstr "Hintergrundscan"
+
+#~ msgid "Compression"
+#~ msgstr "Kompression"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Deaktiviere Hardware-Beacon Zeitgeber"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Scan-Anforderungen nicht beantworten"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Schnelle Frames"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Höchstübertragungsrate"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Mindestübertragungsrate"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Multicastrate"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Funkkanal für den Ausseneinsatz"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Geltungsbereich (Regulatory Domain)"
+
+#~ msgid "Separate WDS"
+#~ msgstr "Separates WDS"
+
+#~ msgid "Static WDS"
+#~ msgstr "Statisches WDS"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Turbo Modus"
+
+#~ msgid "XR Support"
+#~ msgstr "XR-Unterstützung"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr ""
#~ "Erzeugt ein zusätzliches Netzwerk wenn diese Option nicht ausgewählt ist"
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Φορτίο 1 λεπτού:"
msgid "15 Minute Load:"
msgstr "Φορτίο 15 λεπτών:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "Φορτίο 5 λεπτών:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "Υποστήριξη AR"
-
msgid "ARP retry threshold"
msgstr "Όριο επαναδοκιμών ARP"
"Να επιτρέπονται απαντήσεις από ανώτερο επίπεδο εντός του εύρους 127.0.0.0/8, "
"π.χ. για υπηρεσίες RBL"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Συνδεδεμένοι Σταθμοί"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Εξουσιοδότηση"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Κύριος"
msgid "Back to scan results"
msgstr "Πίσω στα αποτελέσματα σάρωσης"
-msgid "Background Scan"
-msgstr "Σάρωση Παρασκηνίου"
-
msgid "Backup / Flash Firmware"
msgstr "Αντίγραφο ασφαλείας / Εγγραφή FLASH Υλικολογισμικό"
"ουσιώδη βασικά αρχεία καθώς και καθορισμένα από το χρήστη μοτίβα αντιγράφων "
"ασφαλείας."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Ρυθμός δεδομένων"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Άθροισμα Ελέγχου"
msgid "Common Configuration"
msgstr "Κοινή Παραμετροποίηση"
-msgid "Compression"
-msgstr "Συμπίεση"
-
msgid "Configuration"
msgstr "Παραμετροποίηση"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Απενεργοποίηση χρονιστή HW-Beacon"
-
msgid "Disabled"
msgstr "Απενεργοποιημένο"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "Αγνόησε τις απαντήσεις ανοδικής ροής RFC1918"
msgid "Do not forward reverse lookups for local networks"
msgstr ""
-msgid "Do not send probe responses"
-msgstr "Να μην στέλνονται απαντήσεις σε probes"
-
msgid "Domain required"
msgstr "Απαίτηση για όνομα τομέα"
msgid "Domain whitelist"
msgstr "Λευκή λίστα τομέων"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr "Ενεργοποίηση ενημέρωσης δυναμικού τερματικού σημείου HE.net."
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "Ενεργοποίηση διαπραγμάτευσης IPv6 πάνω στη PPP ζεύξη"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "Ενεργοποίηση αυτής της προσάρτησης"
msgid "Enabled"
msgstr "Ενεργοποιημένο"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr ""
msgid "Encryption"
msgstr "Κρυπτογράφηση"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "Διαγράφεται..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr "Εξωτερικός εξυπηρετητής καταγραφής συστήματος"
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Γρήγορα Πλαίσια"
-
msgid "File"
msgstr "Αρχείο"
msgid "Firewall"
msgstr "Τείχος Προστασίας"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Ρυθμίσεις Τείχους Προστασίας"
msgid "Free space"
msgstr "Ελεύθερος χώρος"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr ""
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr ""
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "Διεύθυνση IP"
msgid "IPv4-Address"
msgstr "IPv4-Διεύθυνση"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr ""
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6-in-IPv4 (RFC4213)"
"Φαίνεται πως προσπαθείτε να φλασάρετε μια εικόνα που δεν χωράει στην μνήμη "
"flash, παρακαλώ επιβεβαιώστε το αρχείο εικόνας!"
-msgid "Java Script required!"
-msgstr "Απαιτείται Javascript!"
+msgid "JavaScript required!"
+msgstr "Απαιτείται JavaScript!"
msgid "Join Network"
msgstr ""
"requests to"
msgstr ""
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Μέγιστος Ρυθμός"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr "Μέγιστος επιτρεπόμενος αριθμός ενεργών DHCP leases"
msgid "Metric"
msgstr "Μέτρο"
-msgid "Minimum Rate"
-msgstr "Ελάχιστος Ρυθμός"
-
msgid "Minimum hold time"
msgstr "Ελάχιστος χρόνος κράτησης"
msgid "Missing protocol extension for proto %q"
msgstr ""
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Λειτουργία"
msgid "Move up"
msgstr "Μετακίνηση πάνω"
-msgid "Multicast Rate"
-msgstr "Ρυθμός Multicast"
-
msgid "Multicast address"
msgstr "Διεύθυνση Multicast"
msgid "Option removed"
msgstr "Η επιλογή αφαιρέθηκε"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Επιλογές"
msgid "Outbound:"
msgstr ""
-msgid "Outdoor Channels"
-msgstr "Εξωτερικά Κανάλια"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr ""
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr "PIN"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP"
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "Διενέργεια αρχικοποίησης"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr ""
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr ""
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Συνέχεια"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Ψευδό Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr ""
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr ""
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr ""
msgid "Receiver Antenna"
msgstr "Κεραία Λήψης"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "Επανασύνδεση της διεπαφής"
msgid "References"
msgstr "Αναφορές"
-msgid "Regulatory Domain"
-msgstr "Ρυθμιστική Περιοχή"
-
msgid "Relay"
msgstr ""
msgid "Remote IPv4 address"
msgstr "Απομακρυσμένη διεύθυνση IPv4"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Αφαίρεση"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Απομόνωση Πελατών"
-msgid "Separate WDS"
-msgstr "Ξεχωριστά WDS"
-
msgid "Server Settings"
msgstr "Ρυθμίσεις Εξυπηρετητή"
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
msgid "Sort"
"dead"
msgstr ""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "Ορίστε το κρυφό κλειδί κρυπτογράφησης."
msgid "Static Routes"
msgstr "Στατικές Διαδρομές"
-msgid "Static WDS"
-msgstr ""
-
msgid "Static address"
msgstr "Στατική διεύθυνση"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
msgid "The length of the IPv6 prefix in bits"
msgstr ""
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Λειτουργία Turbo"
-
msgid "Tx-Power"
msgstr "Ισχύς Εκπομπής"
msgid "USB Device"
msgstr "Συσκευή USB"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "UUID"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
msgid "Upload archive..."
msgid "Used Key Slot"
msgstr "Χρησιμοποιούμενη Υποδοχή Κλειδιού"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "Ασύρματο"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "Υποστήριξη XR"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"όπως το \"network\", η συσκευή σας μπορεί να καταστεί μη-προσβάσιμη!</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr ""
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr ""
msgid "« Back"
msgstr "« Πίσω"
+#~ msgid "AR Support"
+#~ msgstr "Υποστήριξη AR"
+
+#~ msgid "Background Scan"
+#~ msgstr "Σάρωση Παρασκηνίου"
+
+#~ msgid "Compression"
+#~ msgstr "Συμπίεση"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Απενεργοποίηση χρονιστή HW-Beacon"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Να μην στέλνονται απαντήσεις σε probes"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Γρήγορα Πλαίσια"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Μέγιστος Ρυθμός"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Ελάχιστος Ρυθμός"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Ρυθμός Multicast"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Εξωτερικά Κανάλια"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Ρυθμιστική Περιοχή"
+
+#~ msgid "Separate WDS"
+#~ msgstr "Ξεχωριστά WDS"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Λειτουργία Turbo"
+
+#~ msgid "XR Support"
+#~ msgstr "Υποστήριξη XR"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "Ένα επιπλέον δίκτυο θα δημιουργηθεί εάν αυτό αφεθεί κενό"
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "1 Minute Load:"
msgid "15 Minute Load:"
msgstr "15 Minute Load:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "5 Minute Load:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "AR Support"
-
msgid "ARP retry threshold"
msgstr "ARP retry threshold"
msgstr ""
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Associated Stations"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Authentication"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Authoritative"
msgid "Back to scan results"
msgstr "Back to scan results"
-msgid "Background Scan"
-msgstr "Background Scan"
-
msgid "Backup / Flash Firmware"
msgstr "Backup / Flash Firmware"
"configuration files marked by opkg, essential base files and the user "
"defined backup patterns."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Bitrate"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Checksum"
msgid "Common Configuration"
msgstr "Common Configuration"
-msgid "Compression"
-msgstr "Compression"
-
msgid "Configuration"
msgstr "Configuration"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Disable HW-Beacon timer"
-
msgid "Disabled"
msgstr "Disabled"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr ""
msgid "Do not forward reverse lookups for local networks"
msgstr ""
-msgid "Do not send probe responses"
-msgstr "Do not send probe responses"
-
msgid "Domain required"
msgstr "Domain required"
msgid "Domain whitelist"
msgstr ""
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr ""
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr ""
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr ""
msgid "Enabled"
msgstr "Enabled"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "Enables the Spanning Tree Protocol on this bridge"
msgid "Encryption"
msgstr "Encryption"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr ""
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr ""
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Fast Frames"
-
msgid "File"
msgstr ""
msgid "Firewall"
msgstr "Firewall"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Firewall Settings"
msgid "Free space"
msgstr ""
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr ""
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "Handler"
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "IP address"
msgid "IPv4-Address"
msgstr ""
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr ""
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr ""
"It appears that you try to flash an image that does not fit into the flash "
"memory, please verify the image file!"
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr ""
msgid "Join Network"
"requests to"
msgstr ""
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Maximum Rate"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr ""
msgid "Metric"
msgstr "Metric"
-msgid "Minimum Rate"
-msgstr "Minimum Rate"
-
msgid "Minimum hold time"
msgstr "Minimum hold time"
msgid "Missing protocol extension for proto %q"
msgstr ""
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Mode"
msgid "Move up"
msgstr ""
-msgid "Multicast Rate"
-msgstr "Multicast Rate"
-
msgid "Multicast address"
msgstr ""
msgid "Option removed"
msgstr ""
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Options"
msgid "Outbound:"
msgstr ""
-msgid "Outdoor Channels"
-msgstr "Outdoor Channels"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr ""
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr ""
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr ""
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr ""
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr ""
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr ""
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Proceed"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Pseudo Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr ""
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr ""
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr ""
msgid "Receiver Antenna"
msgstr "Receiver Antenna"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr ""
msgid "References"
msgstr "References"
-msgid "Regulatory Domain"
-msgstr "Regulatory Domain"
-
msgid "Relay"
msgstr ""
msgid "Remote IPv4 address"
msgstr ""
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Remove"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Separate Clients"
-msgid "Separate WDS"
-msgstr "Separate WDS"
-
msgid "Server Settings"
msgstr ""
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
msgid "Sort"
"dead"
msgstr ""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr ""
msgid "Static Routes"
msgstr "Static Routes"
-msgid "Static WDS"
-msgstr ""
-
msgid "Static address"
msgstr ""
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
msgid "The length of the IPv6 prefix in bits"
msgstr ""
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Turbo Mode"
-
msgid "Tx-Power"
msgstr ""
msgid "USB Device"
msgstr ""
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr ""
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
msgid "Upload archive..."
msgid "Used Key Slot"
msgstr ""
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr ""
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "XR Support"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"scripts like \"network\", your device might become inaccessible!</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr ""
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr ""
msgid "« Back"
msgstr "« Back"
+#~ msgid "AR Support"
+#~ msgstr "AR Support"
+
+#~ msgid "Background Scan"
+#~ msgstr "Background Scan"
+
+#~ msgid "Compression"
+#~ msgstr "Compression"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Disable HW-Beacon timer"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Do not send probe responses"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Fast Frames"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Maximum Rate"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Minimum Rate"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Multicast Rate"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Outdoor Channels"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Regulatory Domain"
+
+#~ msgid "Separate WDS"
+#~ msgstr "Separate WDS"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Turbo Mode"
+
+#~ msgid "XR Support"
+#~ msgstr "XR Support"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "An additional network will be created if you leave this unchecked."
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Carga a 1 minuto:"
msgid "15 Minute Load:"
msgstr "Carga a 15 minutos:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "Carga a 5 minutos:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr ""
"<abbr title=\"Identificador de conjunto de servicios básicos\">BSSID</abbr>"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "Soporte a AR"
-
msgid "ARP retry threshold"
msgstr "Umbral de reintento ARP"
msgstr ""
"Permitir respuestas en el rango 127.0.0.0/8, por ejemplo para servicios RBL"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Estaciones asociadas"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Controlador inalámbrico 802.11%s Atheros"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Autentificación"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Autorizado"
msgid "Back to scan results"
msgstr "Volver a resultados de la exploración"
-msgid "Background Scan"
-msgstr "Exploración en segundo plano"
-
msgid "Backup / Flash Firmware"
msgstr "Copia de seguridad / Grabar firmware"
"esenciales base y los patrones de copia de seguridad definidos por el "
"usuario."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Bitrate"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Comprobación"
msgid "Common Configuration"
msgstr "Configuración común"
-msgid "Compression"
-msgstr "Compresión"
-
msgid "Configuration"
msgstr "Configuración"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Desactivar el temporizador de baliza hardware"
-
msgid "Disabled"
msgstr "Desactivar"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "Descartar respuestas RFC1918 salientes"
msgid "Do not forward reverse lookups for local networks"
msgstr "No retransmitir búsquedas inversas para redes locales"
-msgid "Do not send probe responses"
-msgstr "No enviar respuestas de prueba"
-
msgid "Domain required"
msgstr "Dominio requerido"
msgid "Domain whitelist"
msgstr "Lista blanca de dominios"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr "Activar actualización dinámica de punto final HE.net"
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "Activar negociación IPv6 en el enlace PPP"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "Active este punto de montaje"
msgid "Enabled"
msgstr "Activado"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "Activa el protocol STP en este puente"
msgid "Encryption"
msgstr "Encriptación"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "Borrando..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr "Servidor externo de registro del sistema"
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Tramas rápidas"
-
msgid "File"
msgstr "Fichero"
msgid "Firewall"
msgstr "Cortafuegos"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Configuración del cortafuegos"
msgid "Free space"
msgstr "Espacio libre"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "GHz"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "Manejador"
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "Dirección IP"
msgid "IPv4-Address"
msgstr "Dirección IPv4"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr "Dirección IPv6"
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6-en-IPv4 (RFC4213)"
"Parece que está intentando grabar una imagen de firmware mayor que la "
"memoria flash de su equipo. ¡Por favor, verifique el archivo!"
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr "¡Se necesita JavaScript!"
msgid "Join Network"
"Lista de servidores <abbr title=\"Domain Name System\">DNS</abbr> a los que "
"enviar solicitudes"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr "Escucha solo en la interfaz dada o, si no se especifica, en todas"
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Ratio Máximo"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr "Número máximo de cesiones DHCP activas"
msgid "Metric"
msgstr "Métrica"
-msgid "Minimum Rate"
-msgstr "Ratio mínimo"
-
msgid "Minimum hold time"
msgstr "Pausa mínima de espera"
msgid "Missing protocol extension for proto %q"
msgstr "Extensión de protocolo faltante para %q"
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Modo"
msgid "Move up"
msgstr "Subir"
-msgid "Multicast Rate"
-msgstr "Ratio multicast"
-
msgid "Multicast address"
msgstr "Dirección multicast"
msgid "Option removed"
msgstr "Opción eliminada"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Opciones"
msgid "Outbound:"
msgstr "Saliente:"
-msgid "Outdoor Channels"
-msgstr "Canales al aire libre"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr "Ignorar MTU"
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr "PIN"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP"
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "Reiniciar"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr "Ratio Phy:"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Controlador inalámbrico 802.11n Prism2/2.5/3"
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Proceder"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Pseudo Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr "Calidad"
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr "Red inalámbrica en tiempo real"
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr "Protección contra reasociación"
msgid "Receiver Antenna"
msgstr "Antena Receptora"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "Reconectar esta interfaz"
msgid "References"
msgstr "Referencias"
-msgid "Regulatory Domain"
-msgstr "Dominio Regulador"
-
msgid "Relay"
msgstr "Relé"
msgid "Remote IPv4 address"
msgstr "Dirección IPv4 remota"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Desinstalar"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "Necesario para ciertos ISPs, por ejemplo Charter con DOCSIS 3"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Aislar clientes"
-msgid "Separate WDS"
-msgstr "WDS aislado"
-
msgid "Server Settings"
msgstr "Configuración del servidor"
msgid "Sorry, the server encountered an unexpected error."
msgstr "El servidor encontró un error inesperado."
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
"No está instalado el soporte para el sysupgrade, la nueva imagen debe "
-"grabarse manualmente. Por favor, mire el wiki de OpenWrt para instrucciones "
-"de instalación específicas."
+"grabarse manualmente. Por favor, mire el wiki para instrucciones de "
+"instalación específicas."
msgid "Sort"
msgstr "Ordenar"
"Especifica la cantidad de segundos a transcurrir hasta suponer muerta una "
"máquina"
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "Especifica la clave secreta de encriptado."
msgid "Static Routes"
msgstr "Rutas estáticas"
-msgid "Static WDS"
-msgstr "WDS estático"
-
msgid "Static address"
msgstr "Dirección estática"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
"El prefijo IPv6 asignado por el proveedor, suele termina con <code>::</code>"
msgid "The length of the IPv6 prefix in bits"
msgstr "Longitud del prefijo IPv6 en bits"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Modo Turbo"
-
msgid "Tx-Power"
msgstr "Potencia-TX"
msgid "USB Device"
msgstr "Dispositivo USB"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "UUID"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
"Suba una imagen compatible con sysupgrade para reemplazar el firmware "
"actual. Puede marcar \"Conservar la configuración\" si lo desea (es "
-"necesario que la imagen de OpenWrt sea compatible)."
+"necesario que la imagen sea compatible)."
msgid "Upload archive..."
msgstr "Subir archivo..."
msgid "Used Key Slot"
msgstr "Espacio de clave usado"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "Red inalámbrica"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "Soporte de XR"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"inaccesible!.</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
-"Debe activar Javascript en su navegador o LuCI no funcionará correctamente."
+"Debe activar JavaScript en su navegador o LuCI no funcionará correctamente."
msgid ""
"Your Internet Explorer is too old to display this page correctly. Please "
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "marcado"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "desconocido"
msgid "« Back"
msgstr "« Volver"
+#~ msgid "AR Support"
+#~ msgstr "Soporte a AR"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Controlador inalámbrico 802.11%s Atheros"
+
+#~ msgid "Background Scan"
+#~ msgstr "Exploración en segundo plano"
+
+#~ msgid "Compression"
+#~ msgstr "Compresión"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Desactivar el temporizador de baliza hardware"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "No enviar respuestas de prueba"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Tramas rápidas"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Ratio Máximo"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Ratio mínimo"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Ratio multicast"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Canales al aire libre"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Dominio Regulador"
+
+#~ msgid "Separate WDS"
+#~ msgstr "WDS aislado"
+
+#~ msgid "Static WDS"
+#~ msgstr "WDS estático"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Modo Turbo"
+
+#~ msgid "XR Support"
+#~ msgstr "Soporte de XR"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "Se creará una red adicional si deja esto desmarcado."
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Charge sur 1 minute :"
msgid "15 Minute Load:"
msgstr "Charge sur 15 minutes :"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "Charge sur 5 minutes :"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "Gestion du mode AR"
-
msgid "ARP retry threshold"
msgstr "Niveau de ré-essai ARP"
"Autorise les réponses de l'amont dans la plage 127.0.0.0/8, par ex. pour les "
"services RBL"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Équipements associés"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Contrôleur sans fil Atheros 802.11%s "
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Authentification"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Autoritaire"
msgid "Back to scan results"
msgstr "Retour aux résultats de la recherche"
-msgid "Background Scan"
-msgstr "Recherche en arrière-plan"
-
msgid "Backup / Flash Firmware"
msgstr "Sauvegarde / Mise à jour du micrologiciel"
"de configuration modifiés marqués par opkg, des fichiers de base essentiels, "
"et des motifs de sauvegarde définis par l'utilisateur."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Débit"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Somme de contrôle"
msgid "Common Configuration"
msgstr "Configuration commune"
-msgid "Compression"
-msgstr "Compression"
-
msgid "Configuration"
msgstr "Configuration"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Désactiver l'émission périodique de balises wifi (« HW-Beacon »)"
-
msgid "Disabled"
msgstr "Désactivé"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "Jeter les réponses en RFC1918 amont"
msgstr ""
"Ne pas transmettre les requêtes de recherche inverse pour les réseaux locaux"
-msgid "Do not send probe responses"
-msgstr "Ne pas envoyer de réponses de test"
-
msgid "Domain required"
msgstr "Domaine nécessaire"
msgid "Domain whitelist"
msgstr "Liste blanche de domaines"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr "Activer la mise à jour dynamique de l'extrémité du tunnel chez HE.net"
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "Activer la négociation IPv6 sur le lien PPP"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "Activer ce montage"
msgid "Enabled"
msgstr "Activé"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr ""
"Activer le protocole <abbr title=\"Spanning Tree Protocol\">STP</abbr> sur "
msgid "Encryption"
msgstr "Chiffrement"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "Effacement…"
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr "Serveur distant de journaux système"
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Trames rapides"
-
msgid "File"
msgstr "Fichier"
msgid "Firewall"
msgstr "Pare-feu"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Paramètres du pare-feu"
msgid "Free space"
msgstr "Espace libre"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "Ghz"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "Gestionnaire"
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "Adresse IP"
msgid "IPv4-Address"
msgstr "Adresse IPv4"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr "Adresse IPv6"
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6 dans IPv4 (RFC 4213)"
"tient pas dans sa mémoire flash, vérifiez s'il vous plait votre fichier-"
"image !"
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr "Nécessite un Script Java !"
msgid "Join Network"
"Liste des serveurs auquels sont transmis les requêtes <abbr title=\"Domain "
"Name System\">DNS</abbr>"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr "Écouter seulement sur l'interface spécifié, sinon sur toutes"
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Débit maximum"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr "Nombre maximum de baux DHCP actifs"
msgid "Metric"
msgstr "Metrique"
-msgid "Minimum Rate"
-msgstr "Débit minimum"
-
msgid "Minimum hold time"
msgstr "Temps de maintien mimimum"
msgid "Missing protocol extension for proto %q"
msgstr "Extention de protocole manquante pour le proto %q"
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Mode"
msgid "Move up"
msgstr "Monter"
-msgid "Multicast Rate"
-msgstr "Débit multidiffusion"
-
msgid "Multicast address"
msgstr "Adresse multidiffusion"
msgid "Option removed"
msgstr "Option retirée"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Options"
msgid "Outbound:"
msgstr "Extérieur :"
-msgid "Outdoor Channels"
-msgstr "Canaux en extérieur"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr "Modifier le MTU"
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr "code PIN"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP"
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "Réinitialiser"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr "Débit de la puce:"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Contrôleur sans fil Prism2/2.5/3 802.11b"
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Continuer"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Pseudo Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr "Qualitée"
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr "Qualité de réception actuelle"
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr "Protection contre l'attaque « rebind »"
msgid "Receiver Antenna"
msgstr "Antenne émettrice"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "Reconnecter cet interface"
msgid "References"
msgstr "Références"
-msgid "Regulatory Domain"
-msgstr "Domaine de certification"
-
msgid "Relay"
msgstr "Relais"
msgid "Remote IPv4 address"
msgstr "Adresse IPv4 distante"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Désinstaller"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "Nécessaire avec certains FAIs, par ex. : Charter avec DOCSIS 3"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Isoler les clients"
-msgid "Separate WDS"
-msgstr "WDS séparé"
-
msgid "Server Settings"
msgstr "Paramètres du serveur"
msgid "Sorry, the server encountered an unexpected error."
msgstr "Désolé, le serveur à rencontré une erreur inattendue."
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
"Désolé, il n'y a pas de gestion de mise à jour disponible, une nouvelle "
"image du micrologiciel doit être écrite manuellement. Reportez-vous S.V.P. "
-"au wiki OpenWrt pour connaître les instructions d'installation spécifiques à "
-"votre matériel."
+"au wiki pour connaître les instructions d'installation spécifiques à votre "
+"matériel."
msgid "Sort"
msgstr "Trier"
"dead"
msgstr "Indique le délai après quoi les hôtes seront supposés disparus"
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "Spécifiez ici la clé secrète de chiffrage."
msgid "Static Routes"
msgstr "Routes statiques"
-msgid "Static WDS"
-msgstr "WDS statique"
-
msgid "Static address"
msgstr "Adresse statique"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
"Le préfixe IPv6 attribué par le fournisseur, se termine généralement par "
msgid "The length of the IPv6 prefix in bits"
msgstr "La longueur du préfixe IPv6 en bits"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Mode Turbo"
-
msgid "Tx-Power"
msgstr "Puissance d'émission"
msgid "USB Device"
msgstr "Périphérique USB"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "UUID"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
"Envoyer ici une image compatible avec le système de mise à jour pour "
"remplacer le micrologiciel actuel. Cochez \"Garder la configuration\" pour "
"maintenir la configuration actuelle (nécessite une image de micrologiciel "
-"OpenWRT compatible)."
+"compatible)."
msgid "Upload archive..."
msgstr "Envoi de l'archive…"
msgid "Used Key Slot"
msgstr "Clé utilisée"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "Sans-fil"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "Gestion du mode XR"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"\", votre équipement pourrait ne plus être accessible !</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
-"Vous devez activer Java Script dans votre navigateur pour que LuCI "
-"fonctionne correctement."
+"Vous devez activer JavaScript dans votre navigateur pour que LuCI fonctionne "
+"correctement."
msgid ""
"Your Internet Explorer is too old to display this page correctly. Please "
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "marqué"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "inconnu"
msgid "« Back"
msgstr "« Retour"
+#~ msgid "AR Support"
+#~ msgstr "Gestion du mode AR"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Contrôleur sans fil Atheros 802.11%s "
+
+#~ msgid "Background Scan"
+#~ msgstr "Recherche en arrière-plan"
+
+#~ msgid "Compression"
+#~ msgstr "Compression"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Désactiver l'émission périodique de balises wifi (« HW-Beacon »)"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Ne pas envoyer de réponses de test"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Trames rapides"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Débit maximum"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Débit minimum"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Débit multidiffusion"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Canaux en extérieur"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Domaine de certification"
+
+#~ msgid "Separate WDS"
+#~ msgstr "WDS séparé"
+
+#~ msgid "Static WDS"
+#~ msgstr "WDS statique"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Mode Turbo"
+
+#~ msgid "XR Support"
+#~ msgstr "Gestion du mode XR"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "Un réseau supplémentaire sera créé si vous laissé ceci décoché."
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "עומס במשך דקה:"
msgid "15 Minute Load:"
msgstr "עומס במשך רבע שעה:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "עומס במשך 5 דקות:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr ""
msgid "APN"
msgstr ""
-msgid "AR Support"
-msgstr "תמיכת AR"
-
#, fuzzy
msgid "ARP retry threshold"
msgstr "סף נסיונות של ARP"
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr ""
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "תחנות קשורות"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "שלט אלחוטי Atheros 802.11%s"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "אימות"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "מוסמך"
msgid "Back to scan results"
msgstr "חזרה לתוצאות סריקה"
-msgid "Background Scan"
-msgstr "סריקת רקע"
-
msgid "Backup / Flash Firmware"
msgstr "גיבוי / קושחת פלאש"
"המסומנים ב opkg ׁOpen PacKaGe Managementׂ, קבצי בסיס חיוניים ותבניות הגיבוי "
"המוגדרות ע\"י המשתמש."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr ""
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr ""
msgid "Common Configuration"
msgstr "הגדרות נפוצות"
-msgid "Compression"
-msgstr "דחיסה"
-
msgid "Configuration"
msgstr "הגדרות"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
+msgid "Disabled"
msgstr ""
-msgid "Disabled"
+msgid "Disabled (default)"
msgstr ""
msgid "Discard upstream RFC1918 responses"
msgid "Do not forward reverse lookups for local networks"
msgstr ""
-msgid "Do not send probe responses"
-msgstr ""
-
msgid "Domain required"
msgstr ""
msgid "Domain whitelist"
msgstr ""
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr ""
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr ""
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr ""
msgid "Enabled"
msgstr "אפשר"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr ""
msgid "Encryption"
msgstr "הצפנה"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "מוחק..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr ""
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr ""
-
msgid "File"
msgstr ""
msgid "Firewall"
msgstr ""
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr ""
msgid "Free space"
msgstr ""
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr ""
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr ""
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr ""
msgid "IPv4-Address"
msgstr ""
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr ""
msgid "IPv6-Address"
msgstr ""
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr ""
"flash memory, please verify the image file!"
msgstr ""
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr ""
msgid "Join Network"
"requests to"
msgstr ""
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr ""
-
msgid "Maximum allowed number of active DHCP leases"
msgstr ""
msgid "Metric"
msgstr ""
-msgid "Minimum Rate"
-msgstr ""
-
msgid "Minimum hold time"
msgstr ""
msgid "Missing protocol extension for proto %q"
msgstr ""
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr ""
msgid "Move up"
msgstr ""
-msgid "Multicast Rate"
-msgstr ""
-
msgid "Multicast address"
msgstr ""
msgid "Option removed"
msgstr ""
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr ""
msgid "Outbound:"
msgstr ""
-msgid "Outdoor Channels"
-msgstr ""
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr ""
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr ""
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr ""
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr ""
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr ""
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr ""
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr ""
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr ""
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr ""
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr ""
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr ""
msgid "Receiver Antenna"
msgstr ""
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr ""
msgid "References"
msgstr ""
-msgid "Regulatory Domain"
-msgstr ""
-
msgid "Relay"
msgstr ""
msgid "Remote IPv4 address"
msgstr ""
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr ""
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr ""
-msgid "Separate WDS"
-msgstr ""
-
msgid "Server Settings"
msgstr ""
msgid "Sorry, the server encountered an unexpected error."
msgstr "סליחה, השרת נתקל בשגיאה לא צפויה."
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
"סליחה, אין תמיכה בעדכון מערכת, ולכן קושחה חדשה חייבת להיצרב ידנית. אנא פנה "
-"אל ה-wiki של OpenWrt עבור הוראות ספציפיות למכשיר שלך."
+"אל ה-wiki של OpenWrt/LEDE עבור הוראות ספציפיות למכשיר שלך."
msgid "Sort"
msgstr "מיין"
"dead"
msgstr ""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr ""
msgid "Static Routes"
msgstr "ניתובים סטטיים"
-msgid "Static WDS"
-msgstr "WDS סטטי"
-
msgid "Static address"
msgstr "כתובת סטטית"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
msgid "The length of the IPv6 prefix in bits"
msgstr ""
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr ""
-
msgid "Tx-Power"
msgstr "עוצמת שידור"
msgid "USB Device"
msgstr ""
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr ""
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
msgid "Upload archive..."
msgid "Used Key Slot"
msgstr ""
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr ""
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr ""
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
msgstr ""
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr "אתה חייב להפעיל את Java Script בדפדפן שלך; אחרת, LuCI לא יפעל כראוי."
+"You must enable JavaScript in your browser or LuCI will not work properly."
+msgstr "אתה חייב להפעיל את JavaScript בדפדפן שלך; אחרת, LuCI לא יפעל כראוי."
msgid ""
"Your Internet Explorer is too old to display this page correctly. Please "
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "מתויג"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr ""
msgid "« Back"
msgstr "<< אחורה"
+#~ msgid "AR Support"
+#~ msgstr "תמיכת AR"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "שלט אלחוטי Atheros 802.11%s"
+
+#~ msgid "Background Scan"
+#~ msgstr "סריקת רקע"
+
+#~ msgid "Compression"
+#~ msgstr "דחיסה"
+
+#~ msgid "Static WDS"
+#~ msgstr "WDS סטטי"
+
#, fuzzy
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "רשת נוספת תווצר אם תשאיר את זה לא מסומן"
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Terhelés (utolsó 1 perc):"
msgid "15 Minute Load:"
msgstr "Terhelés (utolsó 15 perc):"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "Terhelés (utolsó 5 perc):"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "AR Támogatás"
-
msgid "ARP retry threshold"
msgstr "ARP újrapróbálkozási küszöbérték"
"A 127.0.0.0/8-as tartományba eső DNS válaszok engedélyezése (pl. RBL "
"szervizek)"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Kapcsolódó kliensek"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Atheros 802.11%s vezeték-nélküli vezérlő"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Hitelesítés"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Hiteles"
msgid "Back to scan results"
msgstr "Vissza a felderítési eredményekhez"
-msgid "Background Scan"
-msgstr "Felderítés a háttérben"
-
msgid "Backup / Flash Firmware"
msgstr "Mentés / Firmware frissítés"
"fájlokból valamint a felhasználó által megadott mintáknak megfelelő "
"fájlokból áll."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Bitráta"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Ellenőrző összeg"
msgid "Common Configuration"
msgstr "Álatános beállítás"
-msgid "Compression"
-msgstr "Tömörítés"
-
msgid "Configuration"
msgstr "Beállítás"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Hardveres beacon időzítő letiltása"
-
msgid "Disabled"
msgstr "Letiltva"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "Beérkező RFC1918 DHCP válaszok elvetése. "
msgid "Do not forward reverse lookups for local networks"
msgstr "Ne továbbítson fordított keresési kéréseket a helyi hálózathoz"
-msgid "Do not send probe responses"
-msgstr "Ne válaszoljon a szondázásra"
-
msgid "Domain required"
msgstr "Tartomány szükséges"
msgid "Domain whitelist"
msgstr "Tartomány fehérlista"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr "HE.net dinamikus végpont frissítésének engedélyezése"
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "IPv6 egyeztetés engedélyezése a PPP linken"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "A csatolás engedélyezése"
msgid "Enabled"
msgstr "Engedélyezve"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "A Spanning Tree prokoll engedélyezése erre a hídra"
msgid "Encryption"
msgstr "Titkosítás"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "Törlés..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr "Külső rendszernapló kiszolgáló"
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Gyors keretek"
-
msgid "File"
msgstr "Fájl"
msgid "Firewall"
msgstr "Tűzfal"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Tűzfal Beállítások"
msgid "Free space"
msgstr "Szabad hely"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "GHz"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "Kezelő"
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "IP cím"
msgid "IPv4-Address"
msgstr "IPv4-cím"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr "IPv6-cím"
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6 IPv4-ben (RFC4213)"
"Úgy tűnik, hogy a flash-elendő kép-file nem fér el a Flash-memóriába. Kérem "
"ellenőrizze a kép fájlt!"
-msgid "Java Script required!"
-msgstr "Javascript szükséges!"
+msgid "JavaScript required!"
+msgstr "JavaScript szükséges!"
msgid "Join Network"
msgstr "Csatlakozás a hálózathoz"
"<abbr title=\"Domain Name System\">DNS</abbr> szerverek listája, ahová a "
"kérések továbbításra kerülnek"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
"Csak a megadott interfészen hallgat, vagy az összesen, amennyiben nem adja "
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Maximális sebesség"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr "Aktív DHCP bérletek maximális száma"
msgid "Metric"
msgstr "Metrika"
-msgid "Minimum Rate"
-msgstr "Minimális sebesség"
-
msgid "Minimum hold time"
msgstr "Minimális tartási idő"
msgid "Missing protocol extension for proto %q"
msgstr "Hiányzó protokoll kiterjesztés a %q progokoll számára"
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Mód"
msgid "Move up"
msgstr "Mozgatás felfelé"
-msgid "Multicast Rate"
-msgstr "Multicast sebesség"
-
msgid "Multicast address"
msgstr "Multicast cím"
msgid "Option removed"
msgstr "Beállítás eltávolítva"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Lehetőségek"
msgid "Outbound:"
msgstr "Kimenő:"
-msgid "Outdoor Channels"
-msgstr "Kültéri csatornák"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr "MTU felülbíráslás"
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr "PIN"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP"
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "Visszaállítás végrehajtása"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr "Phy sebesség:"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Prism2/2.5/3 802.11b vezeték nélküli vezérlő"
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Folytatás"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Ál Ad-hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr "Minőség"
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr "Valósidejű vezetéknélküli adatok"
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr "Rebind elleni védelem"
msgid "Receiver Antenna"
msgstr "Vevő antenna"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "Csatlakoztassa újra az interfészt"
msgid "References"
msgstr "Hivatkozások"
-msgid "Regulatory Domain"
-msgstr "Szabályozó tartomány"
-
msgid "Relay"
msgstr "Átjátszás"
msgid "Remote IPv4 address"
msgstr "Távoli IPv4 cím"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Eltávolítás"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
"Szükséges bizonyos internetszolgáltatók esetén, pl. Charter 'DOCSIS 3'-al"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Kliensek szétválasztása"
-msgid "Separate WDS"
-msgstr "WDS szétválasztása"
-
msgid "Server Settings"
msgstr "Kiszolgáló beállításai"
msgid "Sorry, the server encountered an unexpected error."
msgstr "Sajnálom, a szerver váratlan hibát észlelt."
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
"Sajnáljuk, a 'sysupgrade' támogatás nem elérhető, az új firmware fájl "
"telepítését manuálisan kell elvégezni. Az eszközhöz tartozó telepítési "
-"utasításokért keresse fel az OpenWrt wiki-t."
+"utasításokért keresse fel az wiki-t."
msgid "Sort"
msgstr "Sorbarendezés"
msgstr ""
"Megadja a másodpercek számát, amik után a host nem elérhetőnek tekinthető"
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "Itt adja meg a titkosító kulcsot."
msgid "Static Routes"
msgstr "Statikus útvonalak"
-msgid "Static WDS"
-msgstr "Statikus WDS"
-
msgid "Static address"
msgstr "Statikus cím"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
"A szolgáltatóhoz rendelt IPv6 előtag, általában így végződik: <code>::</code>"
msgid "The length of the IPv6 prefix in bits"
msgstr "Az IPv6 előtag hossza bitekben"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Turbó mód"
-
msgid "Tx-Power"
msgstr "Adóteljesítmény"
msgid "USB Device"
msgstr "USB eszköz"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "UUID"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
"Itt tölthet fel egy új sysupgrade-kompatibilis képet a futó firmware "
"lecseréléséhez. A jelenlegi beállítások megtartásához jelölje be a "
-"\"Beállítások megtartása\" négyzetet (OpenWrt-vel kompatibilis firmware kép "
-"szükséges)."
+"\"Beállítások megtartása\" négyzetet (kompatibilis firmware kép szükséges)."
msgid "Upload archive..."
msgstr "Archívum feltöltése..."
msgid "Used Key Slot"
msgstr "Használt kulcsindex"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "Vezetéknélküli rész"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "XR támogatás"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"esetén, az eszköz elérhetetlenné válhat!</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
"Engélyezze a Java Szkripteket a böngészőjében, mert anélkül a LuCI nem fog "
"megfelelően működni."
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "cimkézett"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "ismeretlen"
msgid "« Back"
msgstr "« Vissza"
+#~ msgid "AR Support"
+#~ msgstr "AR Támogatás"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Atheros 802.11%s vezeték-nélküli vezérlő"
+
+#~ msgid "Background Scan"
+#~ msgstr "Felderítés a háttérben"
+
+#~ msgid "Compression"
+#~ msgstr "Tömörítés"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Hardveres beacon időzítő letiltása"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Ne válaszoljon a szondázásra"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Gyors keretek"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Maximális sebesség"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Minimális sebesség"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Multicast sebesség"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Kültéri csatornák"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Szabályozó tartomány"
+
+#~ msgid "Separate WDS"
+#~ msgstr "WDS szétválasztása"
+
+#~ msgid "Static WDS"
+#~ msgstr "Statikus WDS"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Turbó mód"
+
+#~ msgid "XR Support"
+#~ msgstr "XR támogatás"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "Amennyiben ezt jelöletlenül hagyja, egy további hálózat jön létre"
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Carico in 1 minuto:"
msgid "15 Minute Load:"
msgstr "Carico in 15 minut:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "Carico in 5 minuti:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr ""
"<abbr title=\"Servizio basilare di impostazione Identificatore\">BSSID</abbr>"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "Supporto AR"
-
msgid "ARP retry threshold"
msgstr "riprova soglia ARP"
"Permetti le risposte upstream nell'intervallo 127.0.0.0/8, per esempio nei "
"servizi RBL"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Dispositivi Wi-Fi connessi"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Dispositivo Wireless Atheros 802.11%s"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Autenticazione PEAP"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Autoritativo"
msgid "Back to scan results"
msgstr "Ritorno ai risultati della scansione"
-msgid "Background Scan"
-msgstr "Scansione in background"
-
msgid "Backup / Flash Firmware"
msgstr "Copia di Sicurezza / Flash Firmware"
"composta dai file di configurazione modificati installati da opkg, file di "
"base essenziali e i file di backup definiti dall'utente."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Bitrate"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Checksum"
msgid "Common Configuration"
msgstr "Configurazioni Comuni"
-msgid "Compression"
-msgstr "Compressione"
-
msgid "Configuration"
msgstr "Configurazione"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Disabilita Timer Beacon HW"
-
msgid "Disabled"
msgstr "Disabilitato"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "Ignora risposte RFC1918 upstream"
msgid "Do not forward reverse lookups for local networks"
msgstr "Non proseguire con le ricerche inverse per le reti locali."
-msgid "Do not send probe responses"
-msgstr "Disabilita Probe-Responses"
-
msgid "Domain required"
msgstr "Dominio richiesto"
msgid "Domain whitelist"
msgstr "Elenco Domini consentiti"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr "Abilitazione aggiornamento endpoint dinamico HE.net"
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "Attiva la negoziazione IPv6 sul collegamento PPP"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "Abilita questo mount"
msgid "Enabled"
msgstr "Abilitato"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "Abilita il protocollo di Spanning Tree su questo bridge"
msgid "Encryption"
msgstr "Crittografia"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "Cancellazione..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr "Server Log di Sistema esterno"
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Frame veloci"
-
msgid "File"
msgstr "File"
msgid "Firewall"
msgstr "Firewall"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Impostazioni Firewall"
msgid "Free space"
msgstr "Spazio libero"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "GHz"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "Gestore"
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "Indirizzo IP"
msgid "IPv4-Address"
msgstr "Indirizzo-IPv4"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr "Indirizzo-IPv6"
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6-in-IPv4 (RFC4213)"
"Sembra tu stia provando a flashare un'immagine più grande delle dimensioni "
"della memoria flash, per favore controlla il file!"
-msgid "Java Script required!"
-msgstr "Richiesto Java Script!"
+msgid "JavaScript required!"
+msgstr "Richiesto JavaScript!"
msgid "Join Network"
msgstr "Aggiungi Rete"
"Elenco di Server <abbr title=\"Sistema Nome Dimio\">DNS</abbr>a cui "
"inoltrare le richieste in"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr "Ascolta solo l'interfaccia data o, se non specificato, su tutte"
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Velocità massima"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr ""
msgid "Metric"
msgstr "Metrica"
-msgid "Minimum Rate"
-msgstr "Velocità minima"
-
msgid "Minimum hold time"
msgstr "Velocità minima"
msgid "Missing protocol extension for proto %q"
msgstr ""
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Modalità"
msgid "Move up"
msgstr ""
-msgid "Multicast Rate"
-msgstr "Velocità multicast"
-
msgid "Multicast address"
msgstr ""
msgid "Option removed"
msgstr "Opzione cancellata"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Opzioni"
msgid "Outbound:"
msgstr "In uscita:"
-msgid "Outdoor Channels"
-msgstr ""
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr "Sovrascivi MTU"
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr ""
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr ""
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr ""
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr ""
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr ""
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Continuare"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Pseudo Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr ""
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr ""
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr ""
msgid "Receiver Antenna"
msgstr "Antenna ricevente"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "Ricollega questa interfaccia"
msgid "References"
msgstr ""
-msgid "Regulatory Domain"
-msgstr ""
-
msgid "Relay"
msgstr ""
msgid "Remote IPv4 address"
msgstr ""
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Rimuovi"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Isola utenti"
-msgid "Separate WDS"
-msgstr "WDS separati"
-
msgid "Server Settings"
msgstr ""
msgid "Sorry, the server encountered an unexpected error."
msgstr "Spiacente, il server ha rilevato un errore imprevisto."
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
"Spiacenti, non è presente alcun supporto sysupgrade, una nuova immagine "
"firmware deve essere memorizzata (Flash) manualmente. Si prega di fare "
-"riferimento al wiki di OpenWrt per le istruzioni di installazione di "
-"dispositivi specifici."
+"riferimento al wiki per le istruzioni di installazione di dispositivi "
+"specifici."
msgid "Sort"
msgstr "Elenca"
"Specifica la quantità massima di secondi dopo di che si presume che gli host "
"siano morti."
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "Specificare la chiave di cifratura qui."
msgid "Static Routes"
msgstr "Instradamenti Statici"
-msgid "Static WDS"
-msgstr "WDS statico"
-
msgid "Static address"
msgstr "Indirizzo Statico"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
"Il prefisso IPv6 assegnati dal provider, si conclude di solito con <code>::</"
msgid "The length of the IPv6 prefix in bits"
msgstr ""
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Modalità turbo"
-
msgid "Tx-Power"
msgstr ""
msgid "USB Device"
msgstr ""
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr ""
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
"Carica un'immagine sysupgrade compatibile quì per sostituire il firmware in "
"esecuzione. Attivare la spunta \"Mantieni Impostazioni\" per mantenere la "
-"configurazione corrente (richiede un immagine del firmware OpenWrt "
-"compatibile)."
+"configurazione corrente (richiede un immagine del firmware compatibile)."
msgid "Upload archive..."
msgstr "Carica archivio..."
msgid "Used Key Slot"
msgstr "Slot Chiave Usata"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "Wireless"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "Supporto XR"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"potrebbe diventare inaccessibile!</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
-"È necessario attivare Java Script nel tuo browser o LuCI non funzionerà "
+"È necessario attivare JavaScript nel tuo browser o LuCI non funzionerà "
"correttamente."
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "etichettato"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "sconosciuto"
msgid "« Back"
msgstr "« Indietro"
+#~ msgid "AR Support"
+#~ msgstr "Supporto AR"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Dispositivo Wireless Atheros 802.11%s"
+
+#~ msgid "Background Scan"
+#~ msgstr "Scansione in background"
+
+#~ msgid "Compression"
+#~ msgstr "Compressione"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Disabilita Timer Beacon HW"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Disabilita Probe-Responses"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Frame veloci"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Velocità massima"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Velocità minima"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Velocità multicast"
+
+#~ msgid "Separate WDS"
+#~ msgstr "WDS separati"
+
+#~ msgid "Static WDS"
+#~ msgstr "WDS statico"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Modalità turbo"
+
+#~ msgid "XR Support"
+#~ msgstr "Supporto XR"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "Sarà creata una rete aggiuntiva se lasci questo senza spunta."
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2013-10-06 02:29+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
+"PO-Revision-Date: 2017-02-11 03:28+0900\n"
+"Last-Translator: INAGAKI Hiroshi <musashino.open@gmail.com>\n"
"Language: ja\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
+"Language-Team: \n"
msgid "%s is untagged in multiple VLANs!"
-msgstr ""
+msgstr "%s は複数のVLANにUntaggedしています!"
msgid "(%d minute window, %d second interval)"
msgstr "(%d 分幅, %d 秒間隔)"
msgstr "-- 手動設定 --"
msgid "-- match by device --"
-msgstr ""
+msgstr "-- デバイスで設定 --"
msgid "-- match by label --"
-msgstr ""
+msgstr "-- ラベルで設定 --"
+
+msgid "-- match by uuid --"
+msgstr "-- UUIDで設定 --"
msgid "1 Minute Load:"
msgstr "過去1分の負荷:"
msgid "15 Minute Load:"
msgstr "過去15分の負荷:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "過去5分の負荷:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr "802.11w アソシエーションSAクエリの最大タイムアウト時間です。"
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr "802.11w アソシエーションSAクエリの再試行タイムアウト時間です。"
+
+msgid "802.11w Management Frame Protection"
+msgstr "802.11w 管理フレーム保護"
+
+msgid "802.11w maximum timeout"
+msgstr "802.11w 最大タイムアウト"
+
+msgid "802.11w retry timeout"
+msgstr "802.11w 再試行タイムアウト"
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Suffix (hex)"
msgstr ""
+"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-サフィックス (16進数)"
msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> 設定"
msgstr ""
msgid "ADSL"
-msgstr ""
+msgstr "ADSL"
msgid "AICCU (SIXXS)"
msgstr ""
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "ARサポート"
-
msgid "ARP retry threshold"
msgstr "ARP再試行しきい値"
msgstr "追加のホストファイル"
msgid "Additional servers file"
-msgstr ""
+msgstr "追加のサーバー ファイル"
msgid "Address"
msgstr "アドレス"
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr ""
+msgid "Allowed IPs"
+msgstr "許可されるIP"
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgstr ""
msgid "Always announce default router"
-msgstr ""
-
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
+msgstr "常にデフォルト ルーターとして通知する"
msgid "Annex"
msgstr ""
msgid "Announce as default router even if no public prefix is available."
msgstr ""
+"利用可能なパブリック プレフィクスが無くても、デフォルトのルーターとして通知し"
+"ます。"
msgid "Announced DNS domains"
msgstr ""
msgstr ""
msgid "Anonymous Mount"
-msgstr ""
+msgstr "アノニマス マウント"
msgid "Anonymous Swap"
-msgstr ""
+msgstr "アノニマス スワップ"
msgid "Antenna 1"
msgstr "アンテナ 1"
msgid "Associated Stations"
msgstr "認証済み端末"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Atheros 802.11%s 無線LANコントローラ"
-
msgid "Auth Group"
-msgstr ""
+msgstr "認証グループ"
msgid "AuthGroup"
msgstr ""
msgid "Authentication"
msgstr "認証"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Authoritative"
msgstr "自動更新"
msgid "Automatic"
-msgstr ""
+msgstr "自動"
msgid "Automatic Homenet (HNCP)"
msgstr ""
msgid "Automatically check filesystem for errors before mounting"
-msgstr ""
+msgstr "マウント実行前にファイルシステムのエラーを自動でチェックします。"
msgid "Automatically mount filesystems on hotplug"
-msgstr ""
+msgstr "ホットプラグによってファイルシステムを自動的にマウントします。"
msgid "Automatically mount swap on hotplug"
-msgstr ""
+msgstr "ホットプラグによってスワップ パーティションを自動的にマウントします。"
msgid "Automount Filesystem"
-msgstr ""
+msgstr "ファイルシステム 自動マウント"
msgid "Automount Swap"
-msgstr ""
+msgstr "スワップ 自動マウント"
msgid "Available"
msgstr "使用可"
msgid "Back to scan results"
msgstr "スキャン結果へ戻る"
-msgid "Background Scan"
-msgstr "バックグラウンドスキャン"
-
msgid "Backup / Flash Firmware"
msgstr "バックアップ / ファームウェア更新"
"て認識されている設定ファイル、重要なベースファイル、ユーザーが設定した正規表"
"現に一致したファイルの一覧です。"
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+"ワイルドカード アドレスではなく、特定のインターフェースのみにバインドします。"
+
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
msgid "Bitrate"
msgstr "ビットレート"
"Build/distribution specific feed definitions. This file will NOT be "
"preserved in any sysupgrade."
msgstr ""
+"ビルド/ディストリビューション固有のフィード定義です。このファイルはsysupgrade"
+"の際に引き継がれません。"
msgid "Buttons"
msgstr "ボタン"
msgstr "キャンセル"
msgid "Category"
-msgstr ""
+msgstr "カテゴリー"
msgid "Chain"
msgstr "チェイン"
msgstr "チェック"
msgid "Check fileystems before mount"
+msgstr "マウント前にファイルシステムをチェックする"
+
+msgid "Check this option to delete the existing networks from this radio."
msgstr ""
+"この無線から既存のネットワークを削除する場合、このオプションを有効にします。"
msgid "Checksum"
msgstr "チェックサム"
msgid "Common Configuration"
msgstr "一般設定"
-msgid "Compression"
-msgstr "圧縮"
-
msgid "Configuration"
msgstr "設定"
msgstr "接続制限"
msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
+msgstr "TLSが使用できないとき、サーバーへの接続は失敗します。"
msgid "Connections"
msgstr "ネットワーク接続"
"Custom feed definitions, e.g. private feeds. This file can be preserved in a "
"sysupgrade."
msgstr ""
+"プライベート フィードなどのカスタム フィード定義です。このファイルは"
+"sysupgrade時に引き継ぐことができます。"
msgid "Custom feeds"
-msgstr ""
+msgstr "カスタム フィード"
msgid ""
"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
msgstr "DHCPv6 リース"
msgid "DHCPv6 client"
-msgstr ""
+msgstr "DHCPv6 クライアント"
msgid "DHCPv6-Mode"
-msgstr ""
+msgstr "DHCPv6-モード"
msgid "DHCPv6-Service"
-msgstr ""
+msgstr "DHCPv6-サービス"
msgid "DNS"
msgstr "DNS"
msgstr ""
msgid "DS-Lite AFTR address"
-msgstr ""
+msgstr "DS-Lite AFTR アドレス"
msgid "DSL"
-msgstr ""
+msgstr "DSL"
msgid "DSL Status"
msgstr ""
msgstr "デフォルトゲートウェイ"
msgid "Default is stateless + stateful"
-msgstr ""
+msgstr "デフォルトは ステートレス + ステートフル です。"
msgid "Default route"
-msgstr ""
+msgstr "デフォルト ルート"
msgid "Default state"
msgstr "標準状態"
msgstr "デバイス設定"
msgid "Device is rebooting..."
-msgstr ""
+msgstr "デバイスを再起動中です..."
msgid "Device unreachable"
msgstr ""
msgstr "DNSセットアップを無効にする"
msgid "Disable Encryption"
-msgstr ""
-
-msgid "Disable HW-Beacon timer"
-msgstr "HWビーコンタイマーを無効にする"
+msgstr "暗号化を無効にする"
msgid "Disabled"
msgstr "無効"
+msgid "Disabled (default)"
+msgstr "無効（デフォルト）"
+
msgid "Discard upstream RFC1918 responses"
msgstr "RFC1918の応答を破棄します"
msgstr "最も遠い端末との距離(メートル)を設定してください。"
msgid "Distribution feeds"
-msgstr ""
+msgstr "ディストリビューション フィード"
msgid "Diversity"
msgstr "ダイバシティ"
msgid "Do not forward reverse lookups for local networks"
msgstr "ローカルネットワークへの逆引きを転送しません"
-msgid "Do not send probe responses"
-msgstr "プローブレスポンスを送信しない"
-
msgid "Domain required"
msgstr "ドメイン必須"
msgid "Domain whitelist"
msgstr "ドメイン・ホワイトリスト"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
"す。"
msgid "Dual-Stack Lite (RFC6333)"
-msgstr ""
+msgstr "Dual-Stack Lite (RFC6333)"
msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
msgstr ""
msgid "Enable HE.net dynamic endpoint update"
msgstr "HE.netの動的endpoint更新を有効にします"
+msgid "Enable IPv6 negotiation"
+msgstr "IPv6 ネゴシエーションの有効化"
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "PPPリンクのIPv6ネゴシエーションを有効にする"
msgstr "NTPクライアント機能を有効にする"
msgid "Enable Single DES"
-msgstr ""
+msgstr "シングルDESの有効化"
msgid "Enable TFTP server"
msgstr "TFTPサーバーを有効にする"
msgstr "VLAN機能を有効にする"
msgid "Enable WPS pushbutton, requires WPA(2)-PSK"
-msgstr ""
+msgstr "WPS プッシュボタンを有効化するには、WPA(2)-PSKが必要です。"
msgid "Enable learning and aging"
msgstr "ラーニング・エイジング機能を有効にする"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "マウント設定を有効にする"
msgid "Enabled"
msgstr "有効"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "スパニングツリー・プロトコルを有効にする"
msgid "Encryption"
msgstr "暗号化モード"
+msgid "Endpoint Host"
+msgstr "エンドポイント ホスト"
+
+msgid "Endpoint Port"
+msgstr "エンドポイント ポート"
+
msgid "Erasing..."
msgstr "消去中..."
msgstr "イーサネットスイッチ"
msgid "Exclude interfaces"
-msgstr ""
+msgstr "除外インターフェース"
msgid "Expand hosts"
msgstr "拡張ホスト設定"
msgid "Expires"
msgstr "期限切れ"
-#, fuzzy
msgid ""
"Expiry time of leased addresses, minimum is 2 minutes (<code>2m</code>)."
msgstr ""
"code>)."
msgid "External"
+msgstr "外部"
+
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
msgstr ""
msgid "External system log server"
msgstr "外部システムログ・サーバーポート"
msgid "External system log server protocol"
-msgstr ""
+msgstr "外部システムログ・サーバー プロトコル"
msgid "Extra SSH command options"
-msgstr ""
-
-msgid "Fast Frames"
-msgstr "ファスト・フレーム"
+msgstr "拡張 SSHコマンドオプション"
msgid "File"
msgstr "ファイル"
"Find all currently attached filesystems and swap and replace configuration "
"with defaults based on what was detected"
msgstr ""
+"現在アタッチされている全てのファイルシステムとスワップを検索し、検出結果に基"
+"づいてデフォルト設定を置き換えます。"
msgid "Find and join network"
msgstr "ネットワークを検索して参加"
msgid "Firewall"
msgstr "ファイアウォール"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "ファイアウォール設定"
msgstr "ファイアウォール・ステータス"
msgid "Firmware File"
-msgstr ""
+msgstr "ファームウェア ファイル"
msgid "Firmware Version"
msgstr "ファームウェア・バージョン"
msgstr "TKIP 及びCCMP (AES) を使用"
msgid "Force use of NAT-T"
-msgstr ""
+msgstr "NAT-Tの強制使用"
msgid "Form token mismatch"
msgstr ""
msgid "Free space"
msgstr "ディスクの空き容量"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+"WireGuard インターフェースとピアについての詳細情報: <a href=\"http://"
+"wireguard.io\">wireguard.io</a>"
+
msgid "GHz"
msgstr "GHz"
msgstr "一般設定"
msgid "General options for opkg"
-msgstr ""
+msgstr "opkgの一般設定"
msgid "Generate Config"
-msgstr ""
+msgstr "コンフィグ生成"
msgid "Generate archive"
msgstr "バックアップアーカイブの作成"
msgstr "入力されたパスワードが一致しません。パスワードは変更されませんでした!"
msgid "Global Settings"
-msgstr ""
+msgstr "全体設定"
msgid "Global network options"
-msgstr ""
+msgstr "グローバル ネットワークオプション"
msgid "Go to password configuration..."
msgstr "パスワード設定へ移動..."
msgstr "関連する設定ページへ移動"
msgid "Group Password"
-msgstr ""
+msgstr "グループ パスワード"
msgid "Guest"
-msgstr ""
+msgstr "ゲスト"
msgid "HE.net password"
msgstr "HE.net パスワード"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr "HT モード (802.11n)"
+
msgid "Handler"
msgstr "ハンドラ"
msgstr ""
msgid "Heartbeat"
-msgstr ""
+msgstr "ハートビート"
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>の隠匿"
msgid "Host"
-msgstr ""
+msgstr "ホスト"
msgid "Host entries"
msgstr "ホストエントリー"
msgstr "ホスト名"
msgid "Hybrid"
-msgstr ""
+msgstr "ハイブリッド"
msgid "IKE DH Group"
-msgstr ""
+msgstr "IKE DHグループ"
+
+msgid "IP Addresses"
+msgstr "IPアドレス"
msgid "IP address"
msgstr "IPアドレス"
msgstr "IPv4及びIPv6"
msgid "IPv4 assignment length"
-msgstr ""
+msgstr "IPv4 割り当て長"
msgid "IPv4 broadcast"
msgstr "IPv4 ブロードキャスト"
msgstr "IPv4のみ"
msgid "IPv4 prefix"
-msgstr ""
+msgstr "IPv4 プレフィクス"
msgid "IPv4 prefix length"
msgstr "IPv4 プレフィクス長"
msgid "IPv4-Address"
msgstr "IPv4-アドレス"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr "IPv4-in-IPv4 (RFC2003)"
+
msgid "IPv6"
msgstr "IPv6"
msgstr ""
msgid "IPv6 Settings"
-msgstr ""
+msgstr "IPv6 設定"
msgid "IPv6 ULA-Prefix"
-msgstr ""
+msgstr "IPv6 ULA-プレフィクス"
msgid "IPv6 WAN Status"
msgstr "IPv6 WAN ステータス"
msgstr ""
msgid "IPv6 assignment length"
-msgstr ""
+msgstr "IPv6 割り当て長"
msgid "IPv6 gateway"
msgstr "IPv6 ゲートウェイ"
msgid "IPv6-Address"
msgstr "IPv6-アドレス"
+msgid "IPv6-PD"
+msgstr "IPv6-PD"
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6-in-IPv4 (RFC4213)"
msgstr ""
msgid "If checked, encryption is disabled"
-msgstr ""
+msgstr "チェックした場合、暗号化は無効になります。"
msgid ""
"If specified, mount the device by its UUID instead of a fixed device node"
msgstr "インターフェース終了中..."
msgid "Interface name"
-msgstr ""
+msgstr "インターフェース名"
msgid "Interface not present or not connected yet."
msgstr "インターフェースが存在しないか、接続していません"
msgstr "インターフェース"
msgid "Internal"
-msgstr ""
+msgstr "内部"
msgid "Internal Server Error"
msgstr "内部サーバーエラー"
msgid "Invalid username and/or password! Please try again."
msgstr "ユーザー名とパスワードが不正です! もう一度入力してください。"
-#, fuzzy
msgid ""
"It appears that you are trying to flash an image that does not fit into the "
"flash memory, please verify the image file!"
msgstr ""
-"æ\9b´æ\96°ã\81\97ã\82\88ã\81\86ã\81¨ã\81\97ã\81\9fã\82¤ã\83¡ã\83¼ã\82¸ã\83\95ã\82¡ã\82¤ã\83«ã\81¯ã\81\93ã\81®ã\83\95ã\83©ã\83\83ã\82·ã\83¥ã\83¡ã\83¢ã\83ªã\81«é\81©å\90\88ã\81\97ã\81¾ã\81\9bã\82\93ã\80\82ã\82\82ã\81\86ä¸\80"
-"度イメージファイルを確認してください!"
+"æ\9b´æ\96°ã\81\97ã\82\88ã\81\86ã\81¨ã\81\97ã\81\9fã\82¤ã\83¡ã\83¼ã\82¸ã\83\95ã\82¡ã\82¤ã\83«ã\81¯ã\81\93ã\81®ã\83\95ã\83©ã\83\83ã\82·ã\83¥ã\83¡ã\83¢ã\83ªã\81«é\81©å\90\88ã\81\97ã\81¾ã\81\9bã\82\93ã\80\82ã\82¤ã\83¡ã\83¼"
+"ジファイルを確認してください!"
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr "JavaScriptを有効にしてください!"
msgid "Join Network"
msgstr "ネットワークに接続する: 無線LANスキャン"
msgid "Joining Network: %q"
-msgstr ""
+msgstr "次のネットワークに参加: %q"
msgid "Keep settings"
msgstr "設定を保持する"
msgstr "言語とスタイル"
msgid "Latency"
-msgstr ""
+msgstr "レイテンシー"
msgid "Leaf"
msgstr ""
msgid "Lease time"
-msgstr ""
+msgstr "リース時間"
msgid "Lease validity time"
msgstr "リース有効時間"
msgstr ""
msgid "Limit listening to these interfaces, and loopback."
-msgstr ""
+msgstr "待ち受けをこれらのインターフェースとループバックに制限します。"
msgid "Line Attenuation (LATN)"
msgstr ""
"問い合わせを転送する<abbr title=\"Domain Name System\">DNS</abbr> サーバーの"
"リストを設定します"
-msgid "List of SSH key files for auth"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
msgstr ""
+msgid "List of SSH key files for auth"
+msgstr "認証用 SSH暗号キー ファイルのリスト"
+
msgid "List of domains to allow RFC1918 responses for"
msgstr "RFC1918の応答を許可するリスト"
msgstr ""
msgid "Listen Interfaces"
-msgstr ""
+msgstr "待ち受けインターフェース"
+
+msgid "Listen Port"
+msgstr "待ち受けポート"
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
msgstr "ロード中"
msgid "Local IP address to assign"
-msgstr ""
+msgstr "割り当てるローカル IPアドレス"
msgid "Local IPv4 address"
msgstr "ローカル IPv4 アドレス"
msgid "Local domain suffix appended to DHCP names and hosts file entries"
msgstr ""
+"DHCP名とhostsファイルのエントリーに付される、ローカルドメインサフィックスで"
+"す。"
msgid "Local server"
msgstr "ローカルサーバー"
msgstr "ローカライズクエリ"
msgid "Locked to channel %s used by: %s"
-msgstr ""
+msgstr "チャネル %s にロックされています。次で使用されています: %s"
msgid "Log output level"
msgstr "ログ出力レベル"
msgstr "MB/s"
msgid "MD5"
-msgstr ""
+msgstr "MD5"
msgid "MHz"
msgstr "MHz"
"Make sure to clone the root filesystem using something like the commands "
"below:"
msgstr ""
+"以下のようなコマンドを使用して、ルート ファイルシステムを複製してください:"
msgid "Manual"
-msgstr ""
+msgstr "手動"
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "最大レート"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr "DHCPリースの許可される最大数"
"Maximum length of the name is 15 characters including the automatic protocol/"
"bridge prefix (br-, 6in4-, pppoe- etc.)"
msgstr ""
+"名前の長さは、自動的に含まれるプロトコル/ブリッジ プレフィックス （br-, "
+"6in4-, pppoe- など）と合わせて最大15文字です。"
msgid "Maximum number of leased addresses."
msgstr "リースするアドレスの最大数です"
msgid "Metric"
msgstr "メトリック"
-msgid "Minimum Rate"
-msgstr "最小レート"
-
msgid "Minimum hold time"
msgstr "最短保持時間"
msgid "Missing protocol extension for proto %q"
msgstr "プロトコル %qのプロトコル拡張が見つかりません"
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "モード"
msgid "Model"
-msgstr ""
+msgstr "モデル"
msgid "Modem device"
msgstr "モデムデバイス"
"表示しています。"
msgid "Mount filesystems not specifically configured"
-msgstr ""
+msgstr "明確に設定されていないファイルシステムをマウントします。"
msgid "Mount options"
msgstr "マウントオプション"
msgstr "マウントポイント"
msgid "Mount swap not specifically configured"
-msgstr ""
+msgstr "明確に設定されていないスワップ パーティションをマウントします。"
msgid "Mounted file systems"
msgstr "マウント中のファイルシステム"
msgid "Move up"
msgstr "上へ"
-msgid "Multicast Rate"
-msgstr "マルチキャストレート"
-
msgid "Multicast address"
msgstr "マルチキャストアドレス"
msgstr "NAS ID"
msgid "NAT-T Mode"
-msgstr ""
+msgstr "NAT-T モード"
msgid "NAT64 Prefix"
-msgstr ""
+msgstr "NAT64 プレフィクス"
msgid "NDP-Proxy"
-msgstr ""
+msgstr "NDP-プロキシ"
msgid "NT Domain"
-msgstr ""
+msgstr "NT ドメイン"
msgid "NTP server candidates"
msgstr "NTPサーバー候補"
msgid "NTP sync time-out"
-msgstr ""
+msgstr "NTP 同期タイムアウト"
msgid "Name"
msgstr "名前"
msgstr "このインターフェースにはDHCPサーバーが設定されていません"
msgid "No NAT-T"
-msgstr ""
+msgstr "NAT-Tを使用しない"
msgid "No chains in this table"
msgstr "チェイン内にルールがありません"
msgstr ""
msgid "Non-wildcard"
-msgstr ""
+msgstr "非ワイルドカード"
msgid "None"
msgstr "なし"
msgstr "注意: 設定ファイルは消去されます。"
msgid "Note: interface name length"
-msgstr ""
+msgstr "注意: インターフェース名の長さ"
msgid "Notice"
msgstr "注意"
msgstr "1つ以上のフィールドに無効な値が設定されています！"
msgid "One or more invalid/required values on tab"
-msgstr ""
+msgstr "タブに1つ以上の 無効/必須 の値があります。"
msgid "One or more required fields have no value!"
msgstr "1つ以上のフィールドに値が設定されていません！"
msgstr "リストを開く"
msgid "OpenConnect (CISCO AnyConnect)"
-msgstr ""
+msgstr "OpenConnect (CISCO AnyConnect)"
msgid "Operating frequency"
-msgstr ""
+msgstr "動作周波数"
msgid "Option changed"
msgstr "変更されるオプション"
msgid "Option removed"
msgstr "削除されるオプション"
+msgid "Optional"
+msgstr "オプション"
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr "（オプション）"
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+"ピアのホストです。名前はインターフェースの起動前に解決されます。（オプショ"
+"ン）"
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr "トンネル インターフェースのMaximum Transmission Unit（オプション）"
+
+msgid "Optional. Port of peer."
+msgstr "ピアのポート（オプション）"
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+"キープアライブ メッセージの送信間隔（秒）です。既定値: ０。このデバイスがNAT"
+"以下に存在する場合の推奨値は25です。（オプション）"
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr "発信パケットと受信パケットに使用されるUDPポート（オプション）"
+
msgid "Options"
msgstr "オプション"
msgid "Outbound:"
msgstr "送信:"
-msgid "Outdoor Channels"
-msgstr "屋外用周波数"
-
msgid "Output Interface"
-msgstr ""
+msgstr "出力インターフェース"
msgid "Override MAC address"
msgstr "MACアドレスを上書きする"
msgid "Override MTU"
msgstr "MTUを上書きする"
-msgid "Override default interface name"
+msgid "Override TOS"
msgstr ""
+msgid "Override TTL"
+msgstr ""
+
+msgid "Override default interface name"
+msgstr "デフォルトのインターフェース名を上書きします。"
+
msgid "Override the gateway in DHCP responses"
msgstr "DHCPレスポンス内のゲートウェイアドレスを上書きする"
msgid "PIN"
msgstr "PIN"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP"
msgstr "PPPoE"
msgid "PPPoSSH"
-msgstr ""
+msgstr "PPPoSSH"
msgid "PPtP"
msgstr "PPtP"
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr "ピア"
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "設定リセットを実行"
+msgid "Persistent Keep Alive"
+msgstr "永続的なキープアライブ"
+
msgid "Phy Rate:"
msgstr "物理レート:"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr "委任されたプレフィクス (PD)"
+
+msgid "Preshared Key"
+msgstr "事前共有鍵"
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
"を設定した場合、失敗しても無視します"
msgid "Prevent listening on these interfaces."
-msgstr ""
+msgstr "これらのインターフェースでの待ち受けを停止します。"
msgid "Prevents client-to-client communication"
msgstr "クライアント同士の通信を制限します"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Prism2/2.5/3 802.11b 無線LANコントローラ"
+msgid "Private Key"
+msgstr "秘密鍵"
+
msgid "Proceed"
msgstr "続行"
msgstr "プロセス"
msgid "Profile"
-msgstr ""
+msgstr "プロファイル"
msgid "Prot."
msgstr "プロトコル"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "擬似アドホック (ahdemo)"
+msgid "Public Key"
+msgstr "公開鍵"
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr "クオリティ"
-msgid "RFC3947 NAT-T mode"
+msgid "R0 Key Lifetime"
msgstr ""
+msgid "R1 Key Holder"
+msgstr ""
+
+msgid "RFC3947 NAT-T mode"
+msgstr "RFC3947 NAT-Tモード"
+
msgid "RTS/CTS Threshold"
msgstr "RTS/CTS閾値"
msgid "Really reset all changes?"
msgstr "本当に全ての変更をリセットしますか?"
-#, fuzzy
msgid ""
"Really shut down network?\\nYou might lose access to this device if you are "
"connected via this interface."
msgid "Realtime Wireless"
msgstr "リアルタイム・無線LAN"
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr "DNSリバインディング・プロテクション"
msgid "Receiver Antenna"
msgstr "受信アンテナ"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr "WireGuard インターフェースのIPアドレスです。（推奨）"
+
msgid "Reconnect this interface"
msgstr "インターフェースの再接続"
msgid "References"
msgstr "参照カウンタ"
-msgid "Regulatory Domain"
-msgstr "規制ドメイン"
-
msgid "Relay"
msgstr "リレー"
msgid "Remote IPv4 address"
msgstr "リモートIPv4アドレス"
+msgid "Remote IPv4 address or FQDN"
+msgstr "リモート IPv4アドレス または FQDN"
+
msgid "Remove"
msgstr "削除"
msgstr "無線設定を置換する"
msgid "Request IPv6-address"
-msgstr ""
+msgstr "IPv6-アドレスのリクエスト"
msgid "Request IPv6-prefix of length"
-msgstr ""
+msgstr "リクエストするIPv6-プレフィクス長"
msgid "Require TLS"
-msgstr ""
+msgstr "TLSが必要"
+
+msgid "Required"
+msgstr "必須"
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "DOCSIS 3.0を使用するいくつかのISPでは必要になります"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr "このインターフェースに使用するBase64-エンコード 秘密鍵（必須）"
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+"'フル' バージョンの wpad/hostapd と、無線LANドライバーによるサポートが必要で"
+"す。<br />（2017年2月現在: ath9k と ath10k、LEDE内では mwlwifi と mt76）"
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgstr "TFTP経由でファイルを取り扱う際のルートディレクトリ"
msgid "Root preparation"
+msgstr "ルートの準備"
+
+msgid "Route Allowed IPs"
msgstr ""
+msgid "Route type"
+msgstr "ルート タイプ"
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Router Advertisement-Service"
-msgstr ""
+msgstr "ルーター アドバタイズメント-サービス"
msgid "Router Password"
msgstr "ルーター・パスワード"
msgstr "ファイルシステムチェックを行う"
msgid "SHA256"
-msgstr ""
+msgstr "SHA256"
msgid ""
"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
msgstr ""
msgid "SNR"
-msgstr ""
+msgstr "SNR"
msgid "SSH Access"
msgstr "SSHアクセス"
msgid "SSH server address"
-msgstr ""
+msgstr "SSH サーバーアドレス"
msgid "SSH server port"
-msgstr ""
+msgstr "SSH サーバーポート"
msgid "SSH username"
-msgstr ""
+msgstr "SSH ユーザー名"
msgid "SSH-Keys"
msgstr "SSHキー"
msgid "Separate Clients"
msgstr "クライアントの分離"
-msgid "Separate WDS"
-msgstr "WDSを分離する"
-
msgid "Server Settings"
msgstr "サーバー設定"
msgid "Server password"
-msgstr ""
+msgstr "サーバー パスワード"
msgid ""
"Server password, enter the specific password of the tunnel when the username "
msgstr ""
msgid "Server username"
-msgstr ""
+msgstr "サーバー ユーザー名"
msgid "Service Name"
msgstr "サービス名"
msgid "Services"
msgstr "サービス"
-#, fuzzy
msgid "Set up Time Synchronization"
-msgstr "時刻設定"
+msgstr "時刻同期設定"
msgid "Setup DHCP Server"
msgstr "DHCPサーバーを設定"
msgstr ""
msgid "Short GI"
-msgstr ""
+msgstr "Short GI"
msgid "Show current backup file list"
msgstr "現在のバックアップファイルのリストを表示する"
msgstr "サイズ"
msgid "Size (.ipk)"
-msgstr ""
+msgstr "サイズ (.ipk)"
msgid "Skip"
msgstr "スキップ"
msgid "Sorry, the server encountered an unexpected error."
msgstr "申し訳ありません。サーバーに予期せぬエラーが発生しました。"
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
"申し訳ありません。現在このボードではsysupgradeがサポートがされていないため、"
-"ファームウェア更新は手動で行っていただく必要があります。OpenWrt wikiを参照し"
-"ã\81¦ã\80\81ã\81\93ã\81®ã\83\87ã\83\90ã\82¤ã\82¹ã\81®ã\82¤ã\83³ã\82¹ã\83\88ã\83¼ã\83«æ\89\8bé \86ã\82\92å\8f\82ç\85§ã\81\97ã\81¦ã\81\8fã\81 ã\81\95ã\81\84ã\80\82"
+"ファームウェア更新は手動で行っていただく必要があります。wikiを参照して、この"
+"デバイスのインストール手順を参照してください。"
msgid "Sort"
msgstr "ソート"
"dead"
msgstr ""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "暗号鍵を設定します。"
msgstr "優先順位"
msgid "Startup"
-msgstr "Startup"
+msgstr "スタートアップ"
msgid "Static IPv4 Routes"
msgstr "IPv4 静的ルーティング"
msgid "Static Routes"
msgstr "静的ルーティング"
-msgid "Static WDS"
-msgstr "静的WDS"
-
msgid "Static address"
msgstr "静的アドレス"
msgstr ""
msgid "Swap"
-msgstr ""
+msgstr "スワップ"
msgid "Swap Entry"
msgstr "スワップ機能"
msgstr "ターゲット"
msgid "Target network"
-msgstr ""
+msgstr "対象ネットワーク"
msgid "Terminate"
msgstr "停止"
-#, fuzzy
msgid ""
"The <em>Device Configuration</em> section covers physical settings of the "
"radio hardware such as channel, transmit power or antenna selection which "
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
msgid "The given network name is not unique"
msgstr "設定されたネットワーク名はユニークなものではありません"
-#, fuzzy
msgid ""
"The hardware is not multi-SSID capable and the existing configuration will "
"be replaced if you proceed."
msgstr ""
-"このハードウェアではマルチESSIDを設定することができないため、続行した場合、設"
+"このハードウェアでは複数のESSIDを設定することができないため、続行した場合、設"
"定は既存の設定と置き換えられます。"
msgid ""
msgid "The length of the IPv6 prefix in bits"
msgstr ""
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
"when finished."
msgstr "システムは設定領域を消去中です。完了後、自動的に再起動します。"
-#, fuzzy
msgid ""
"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
"few minutes before you try to reconnect. It might be necessary to renew the "
msgstr "トンネルインターフェース"
msgid "Tunnel Link"
-msgstr ""
+msgstr "トンネルリンク"
msgid "Tunnel broker protocol"
-msgstr ""
+msgstr "トンネルブローカー プロトコル"
msgid "Tunnel setup server"
-msgstr ""
+msgstr "トンネルセットアップ サーバー"
msgid "Tunnel type"
-msgstr ""
-
-msgid "Turbo Mode"
-msgstr "ターボモード"
+msgstr "トンネルタイプ"
msgid "Tx-Power"
msgstr "送信電力"
msgid "USB Device"
msgstr "USBデバイス"
+msgid "USB Ports"
+msgstr "USB ポート"
+
msgid "UUID"
msgstr "UUID"
msgstr "Unmanaged"
msgid "Unmount"
-msgstr ""
+msgstr "アンマウント"
msgid "Unsaved Changes"
msgstr "保存されていない変更"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
"システムをアップデートする場合、sysupgrade機能に互換性のあるファームウェアイ"
"メージをアップロードしてください。\"設定の保持\"を有効にすると、現在の設定を"
-"維持してアップデートを行います。ただし、OpenWrt互換のファームウェアイメージが"
-"アップロードされた場合のみ、設定は保持されます。"
+"維持してアップデートを行います。ただし、OpenWrt/LEDE互換のファームウェアイ"
+"ã\83¡ã\83¼ã\82¸ã\81\8cã\82¢ã\83\83ã\83\97ã\83ã\83¼ã\83\89ã\81\95ã\82\8cã\81\9få ´å\90\88ã\81®ã\81¿ã\80\81è¨å®\9aã\81¯ä¿\9dæ\8c\81ã\81\95ã\82\8cã\81¾ã\81\99ã\80\82"
msgid "Upload archive..."
msgstr "アーカイブをアップロード"
msgstr "トンネルインターフェースのTTLを設定"
msgid "Use as external overlay (/overlay)"
-msgstr ""
+msgstr "外部オーバーレイとして使用する (/overlay)"
msgid "Use as root filesystem (/)"
-msgstr ""
+msgstr "ルート ファイルシステムとして使用する (/)"
msgid "Use broadcast flag"
msgstr "ブロードキャスト・フラグを使用する"
msgid "Use builtin IPv6-management"
-msgstr ""
+msgstr "ビルトインのIPv6-マネジメントを使用する"
msgid "Use custom DNS servers"
msgstr "DNSサーバーを手動で設定"
msgid "Used Key Slot"
msgstr "使用するキースロット"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgstr "VC-Mux"
msgid "VDSL"
-msgstr ""
+msgstr "VDSL"
msgid "VLANs on %q"
msgstr "%q上のVLANs"
msgstr "%q上のVLAN (%s)"
msgid "VPN Local address"
-msgstr ""
+msgstr "VPN ローカルアドレス"
msgid "VPN Local port"
-msgstr ""
+msgstr "VPN ローカルポート"
msgid "VPN Server"
msgstr "VPN サーバー"
msgid "VPN Server port"
-msgstr ""
+msgstr "VPN サーバーポート"
msgid "VPN Server's certificate SHA1 hash"
-msgstr ""
+msgstr "VPN サーバー証明書 SHA1ハッシュ"
msgid "VPNC (CISCO 3000 (and others) VPN)"
-msgstr ""
+msgstr "VPNC (CISCO 3000 (またはその他の) VPN)"
msgid "Vendor"
-msgstr ""
+msgstr "ベンダー"
msgid "Vendor Class to send when requesting DHCP"
msgstr "DHCPリクエスト送信時のベンダークラスを設定"
msgstr "コマンド実行中です..."
msgid "Waiting for device..."
-msgstr ""
+msgstr "デバイスの起動をお待ちください..."
msgid "Warning"
msgstr "警告"
msgid "Warning: There are unsaved changes that will get lost on reboot!"
-msgstr ""
+msgstr "警告: 再起動すると消えてしまう、保存されていない設定があります！"
msgid "Whether to create an IPv6 default route over the tunnel"
msgstr ""
msgstr ""
msgid "Width"
-msgstr ""
+msgstr "帯域幅"
+
+msgid "WireGuard VPN"
+msgstr "WireGuard VPN"
msgid "Wireless"
msgstr "無線"
msgstr "受信したDNSリクエストをsyslogへ記録します"
msgid "Write system log to file"
-msgstr ""
-
-msgid "XR Support"
-msgstr "XRサポート"
+msgstr "システムログをファイルに書き込む"
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr "Java Scriptを有効にしない場合、LuCIは正しく動作しません。"
+"You must enable JavaScript in your browser or LuCI will not work properly."
+msgstr "JavaScriptを有効にしない場合、LuCIは正しく動作しません。"
msgid ""
"Your Internet Explorer is too old to display this page correctly. Please "
"upgrade it to at least version 7 or use another browser like Firefox, Opera "
"or Safari."
msgstr ""
+"Internet Explorerが古すぎるため、このページを正しく表示することができません。"
+"バージョン 7以上にアップグレードするか、FirefoxやOpera、Safariなど別のブラウ"
+"ザーを使用してください。"
msgid "any"
msgstr "全て"
msgid "auto"
msgstr "自動"
-#, fuzzy
msgid "automatic"
-msgstr "static"
+msgstr "自動"
msgid "baseT"
msgstr "baseT"
msgstr "無効"
msgid "disabled"
-msgstr ""
+msgstr "無効"
msgid "expired"
msgstr "期限切れ"
msgstr "ヘルプ"
msgid "hidden"
-msgstr ""
+msgstr "(不明)"
msgid "hybrid mode"
-msgstr ""
+msgstr "ハイブリッド モード"
msgid "if target is a network"
msgstr "ターゲットがネットワークの場合"
msgid "input"
-msgstr ""
+msgstr "入力"
msgid "kB"
msgstr "kB"
msgstr "ローカル <abbr title=\"Domain Name System\">DNS</abbr>ファイル"
msgid "minimum 1280, maximum 1480"
+msgstr "最小値 1280、最大値 1480"
+
+msgid "minutes"
msgstr ""
msgid "navigation Navigation"
msgstr "オン"
msgid "open"
-msgstr ""
+msgstr "オープン"
msgid "overlay"
-msgstr ""
+msgstr "オーバーレイ"
msgid "relay mode"
-msgstr ""
+msgstr "リレー モード"
msgid "routed"
msgstr "routed"
msgid "server mode"
-msgstr ""
+msgstr "サーバー モード"
msgid "skiplink1 Skip to navigation"
msgstr ""
msgstr ""
msgid "stateful-only"
-msgstr ""
+msgstr "ステートフルのみ"
msgid "stateless"
-msgstr ""
+msgstr "ステートレス"
msgid "stateless + stateful"
-msgstr ""
+msgstr "ステートレス + ステートフル"
msgid "tagged"
msgstr "tagged"
-msgid "unknown"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
msgstr ""
+msgid "unknown"
+msgstr "不明"
+
msgid "unlimited"
msgstr "無期限"
msgid "« Back"
msgstr "« 戻る"
+#~ msgid "AR Support"
+#~ msgstr "ARサポート"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Atheros 802.11%s 無線LANコントローラ"
+
+#~ msgid "Background Scan"
+#~ msgstr "バックグラウンドスキャン"
+
+#~ msgid "Compression"
+#~ msgstr "圧縮"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "HWビーコンタイマーを無効にする"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "プローブレスポンスを送信しない"
+
+#~ msgid "Fast Frames"
+#~ msgstr "ファスト・フレーム"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "最大レート"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "最小レート"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "マルチキャストレート"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "屋外用周波数"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "規制ドメイン"
+
+#~ msgid "Separate WDS"
+#~ msgstr "WDSを分離する"
+
+#~ msgid "Static WDS"
+#~ msgstr "静的WDS"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "ターボモード"
+
+#~ msgid "XR Support"
+#~ msgstr "XRサポート"
+
+#~ msgid "Required. Public key of peer."
+#~ msgstr "ピアの公開鍵（必須）"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "チェックボックスがオフの場合、追加のネットワークが作成されます。"
--- /dev/null
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2009-06-10 03:40+0200\n"
+"PO-Revision-Date: 2012-04-03 08:44+0200\n"
+"Last-Translator: Weongyo Jeong <weongyo@gmail.com>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: en\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"X-Generator: Pootle 2.0.4\n"
+
+msgid "%s is untagged in multiple VLANs!"
+msgstr ""
+
+msgid "(%d minute window, %d second interval)"
+msgstr "(%d 분 window, %d 초 간격)"
+
+msgid "(%s available)"
+msgstr ""
+
+msgid "(empty)"
+msgstr ""
+
+msgid "(no interfaces attached)"
+msgstr ""
+
+msgid "-- Additional Field --"
+msgstr ""
+
+msgid "-- Please choose --"
+msgstr ""
+
+msgid "-- custom --"
+msgstr ""
+
+msgid "-- match by device --"
+msgstr ""
+
+msgid "-- match by label --"
+msgstr ""
+
+msgid "-- match by uuid --"
+msgstr ""
+
+msgid "1 Minute Load:"
+msgstr "1 분 부하:"
+
+msgid "15 Minute Load:"
+msgstr "15 분 부하:"
+
+msgid "4-character hexadecimal ID"
+msgstr ""
+
+msgid "464XLAT (CLAT)"
+msgstr ""
+
+msgid "5 Minute Load:"
+msgstr "5 분 부하:"
+
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
+msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
+msgstr ""
+
+msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
+msgstr "<abbr title=\"Domain Name System\">DNS</abbr> query 포트"
+
+msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
+msgstr "<abbr title=\"Domain Name System\">DNS</abbr> 서버 포트"
+
+msgid ""
+"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
+"order of the resolvfile"
+msgstr ""
+
+msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
+msgstr ""
+
+msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
+msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-주소"
+
+msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
+msgstr ""
+
+msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
+msgstr ""
+
+msgid ""
+"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
+"(CIDR)"
+msgstr ""
+
+msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
+msgstr ""
+
+msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Suffix (hex)"
+msgstr ""
+
+msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
+msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> 설정"
+
+msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
+msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> 이름"
+
+msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
+msgstr "<abbr title=\"Media Access Control\">MAC</abbr>-주소"
+
+msgid ""
+"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
+"Protocol\">DHCP</abbr> leases"
+msgstr ""
+"<abbr title=\"maximal\">최대</abbr> <abbr title=\"Dynamic Host Configuration "
+"Protocol\">DHCP</abbr> lease 수"
+
+msgid ""
+"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
+"Domain Name System\">EDNS0</abbr> packet size"
+msgstr ""
+"<abbr title=\"maximal\">최대</abbr> <abbr title=\"Extension Mechanisms for "
+"Domain Name System\">EDNS0</abbr> 패킷 크기"
+
+msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
+msgstr "<abbr title=\"maximal\">최대</abbr> 동시 처리 query 수"
+
+msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
+msgstr ""
+
+msgid "A43C + J43 + A43"
+msgstr ""
+
+msgid "A43C + J43 + A43 + V43"
+msgstr ""
+
+msgid "ADSL"
+msgstr ""
+
+msgid "AICCU (SIXXS)"
+msgstr ""
+
+msgid "ANSI T1.413"
+msgstr ""
+
+msgid "APN"
+msgstr ""
+
+msgid "ARP retry threshold"
+msgstr ""
+
+msgid "ATM (Asynchronous Transfer Mode)"
+msgstr ""
+
+msgid "ATM Bridges"
+msgstr ""
+
+msgid "ATM Virtual Channel Identifier (VCI)"
+msgstr ""
+
+msgid "ATM Virtual Path Identifier (VPI)"
+msgstr ""
+
+msgid ""
+"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
+"Linux network interfaces which can be used in conjunction with DHCP or PPP "
+"to dial into the provider network."
+msgstr ""
+
+msgid "ATM device number"
+msgstr ""
+
+msgid "ATU-C System Vendor ID"
+msgstr ""
+
+msgid "AYIYA"
+msgstr ""
+
+msgid "Access Concentrator"
+msgstr ""
+
+msgid "Access Point"
+msgstr ""
+
+msgid "Action"
+msgstr ""
+
+msgid "Actions"
+msgstr "관리 도구"
+
+msgid "Activate this network"
+msgstr "이 네트워를 활성화합니다"
+
+msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
+msgstr ""
+"Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Route 경로"
+
+msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
+msgstr ""
+"Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Route 경로"
+
+msgid "Active Connections"
+msgstr "Active 연결수"
+
+msgid "Active DHCP Leases"
+msgstr "Active DHCP 임대 목록"
+
+msgid "Active DHCPv6 Leases"
+msgstr "Active DHCPv6 임대 목록"
+
+msgid "Ad-Hoc"
+msgstr ""
+
+msgid "Add"
+msgstr "추가"
+
+msgid "Add local domain suffix to names served from hosts files"
+msgstr ""
+
+msgid "Add new interface..."
+msgstr "새로운 인터페이스 추가..."
+
+msgid "Additional Hosts files"
+msgstr "추가적인 Hosts 파일들"
+
+msgid "Additional servers file"
+msgstr ""
+
+msgid "Address"
+msgstr "주소"
+
+msgid "Address to access local relay bridge"
+msgstr ""
+
+msgid "Administration"
+msgstr "관리"
+
+msgid "Advanced Settings"
+msgstr "고급 설정"
+
+msgid "Aggregate Transmit Power(ACTATP)"
+msgstr ""
+
+msgid "Alert"
+msgstr ""
+
+msgid ""
+"Allocate IP addresses sequentially, starting from the lowest available "
+"address"
+msgstr ""
+
+msgid "Allocate IP sequentially"
+msgstr ""
+
+msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
+msgstr "<abbr title=\"Secure Shell\">SSH</abbr> 암호 인증을 허용합니다"
+
+msgid "Allow all except listed"
+msgstr ""
+
+msgid "Allow listed only"
+msgstr ""
+
+msgid "Allow localhost"
+msgstr ""
+
+msgid "Allow remote hosts to connect to local SSH forwarded ports"
+msgstr ""
+
+msgid "Allow root logins with password"
+msgstr "암호를 이용한 root 접근 허용"
+
+msgid "Allow the <em>root</em> user to login with password"
+msgstr "암호를 이용한 <em>root</em> 사용자 접근을 허용합니다"
+
+msgid ""
+"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
+msgstr ""
+
+msgid "Allowed IPs"
+msgstr ""
+
+msgid ""
+"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
+"\">Tunneling Comparison</a> on SIXXS"
+msgstr ""
+
+msgid "Always announce default router"
+msgstr ""
+
+msgid "Annex"
+msgstr ""
+
+msgid "Annex A + L + M (all)"
+msgstr ""
+
+msgid "Annex A G.992.1"
+msgstr ""
+
+msgid "Annex A G.992.2"
+msgstr ""
+
+msgid "Annex A G.992.3"
+msgstr ""
+
+msgid "Annex A G.992.5"
+msgstr ""
+
+msgid "Annex B (all)"
+msgstr ""
+
+msgid "Annex B G.992.1"
+msgstr ""
+
+msgid "Annex B G.992.3"
+msgstr ""
+
+msgid "Annex B G.992.5"
+msgstr ""
+
+msgid "Annex J (all)"
+msgstr ""
+
+msgid "Annex L G.992.3 POTS 1"
+msgstr ""
+
+msgid "Annex M (all)"
+msgstr ""
+
+msgid "Annex M G.992.3"
+msgstr ""
+
+msgid "Annex M G.992.5"
+msgstr ""
+
+msgid "Announce as default router even if no public prefix is available."
+msgstr ""
+
+msgid "Announced DNS domains"
+msgstr ""
+
+msgid "Announced DNS servers"
+msgstr ""
+
+msgid "Anonymous Identity"
+msgstr ""
+
+msgid "Anonymous Mount"
+msgstr ""
+
+msgid "Anonymous Swap"
+msgstr ""
+
+msgid "Antenna 1"
+msgstr ""
+
+msgid "Antenna 2"
+msgstr ""
+
+msgid "Antenna Configuration"
+msgstr ""
+
+msgid "Any zone"
+msgstr ""
+
+msgid "Apply"
+msgstr "적용"
+
+msgid "Applying changes"
+msgstr ""
+
+msgid ""
+"Assign a part of given length of every public IPv6-prefix to this interface"
+msgstr ""
+
+msgid "Assign interfaces..."
+msgstr ""
+
+msgid ""
+"Assign prefix parts using this hexadecimal subprefix ID for this interface."
+msgstr ""
+
+msgid "Associated Stations"
+msgstr "연결된 station 들"
+
+msgid "Auth Group"
+msgstr ""
+
+msgid "AuthGroup"
+msgstr ""
+
+msgid "Authentication"
+msgstr ""
+
+msgid "Authentication Type"
+msgstr ""
+
+msgid "Authoritative"
+msgstr ""
+
+msgid "Authorization Required"
+msgstr "인증이 필요합니다"
+
+msgid "Auto Refresh"
+msgstr "자동 Refresh"
+
+msgid "Automatic"
+msgstr ""
+
+msgid "Automatic Homenet (HNCP)"
+msgstr ""
+
+msgid "Automatically check filesystem for errors before mounting"
+msgstr ""
+
+msgid "Automatically mount filesystems on hotplug"
+msgstr ""
+
+msgid "Automatically mount swap on hotplug"
+msgstr ""
+
+msgid "Automount Filesystem"
+msgstr ""
+
+msgid "Automount Swap"
+msgstr ""
+
+msgid "Available"
+msgstr ""
+
+msgid "Available packages"
+msgstr "이용 가능한 패키지"
+
+msgid "Average:"
+msgstr "평균:"
+
+msgid "B43 + B43C"
+msgstr ""
+
+msgid "B43 + B43C + V43"
+msgstr ""
+
+msgid "BR / DMR / AFTR"
+msgstr ""
+
+msgid "BSSID"
+msgstr ""
+
+msgid "Back"
+msgstr "뒤로"
+
+msgid "Back to Overview"
+msgstr "개요로 이동"
+
+msgid "Back to configuration"
+msgstr "설정으로 돌아가기"
+
+msgid "Back to overview"
+msgstr ""
+
+msgid "Back to scan results"
+msgstr ""
+
+msgid "Backup / Flash Firmware"
+msgstr "Firmware 백업 / Flash"
+
+msgid "Backup / Restore"
+msgstr "백업 / 복구"
+
+msgid "Backup file list"
+msgstr ""
+
+msgid "Bad address specified!"
+msgstr ""
+
+msgid "Band"
+msgstr ""
+
+msgid "Behind NAT"
+msgstr ""
+
+msgid ""
+"Below is the determined list of files to backup. It consists of changed "
+"configuration files marked by opkg, essential base files and the user "
+"defined backup patterns."
+msgstr ""
+"아래는 백업할 파일 목록입니다. 이 목록은 opkg 이 수정되었다고 판단한 파일, "
+"필수 기본 파일 그리고 사용자가 패턴 정의로 백업하도록 지정한 것로 이루어져 있"
+"습니다."
+
+msgid "Bind interface"
+msgstr ""
+
+msgid "Bind only to specific interfaces rather than wildcard address."
+msgstr ""
+
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
+msgid "Bitrate"
+msgstr ""
+
+msgid "Bogus NX Domain Override"
+msgstr ""
+
+msgid "Bridge"
+msgstr ""
+
+msgid "Bridge interfaces"
+msgstr "Bridge 인터페이스"
+
+msgid "Bridge unit number"
+msgstr ""
+
+msgid "Bring up on boot"
+msgstr "부팅시 활성화"
+
+msgid "Broadcom 802.11%s Wireless Controller"
+msgstr ""
+
+msgid "Broadcom BCM%04x 802.11 Wireless Controller"
+msgstr ""
+
+msgid "Buffered"
+msgstr "버퍼된 양"
+
+msgid ""
+"Build/distribution specific feed definitions. This file will NOT be "
+"preserved in any sysupgrade."
+msgstr ""
+"Build/distribution 지정 feed 목록입니다. 이 파일의 내용은 sysupgrade 시 초기"
+"화됩니다."
+
+msgid "Buttons"
+msgstr ""
+
+msgid "CA certificate; if empty it will be saved after the first connection."
+msgstr ""
+
+msgid "CPU usage (%)"
+msgstr "CPU 사용량 (%)"
+
+msgid "Cancel"
+msgstr ""
+
+msgid "Category"
+msgstr ""
+
+msgid "Chain"
+msgstr ""
+
+msgid "Changes"
+msgstr "변경 사항"
+
+msgid "Changes applied."
+msgstr ""
+
+msgid "Changes the administrator password for accessing the device"
+msgstr "장비 접근을 위한 관리자 암호를 변경합니다"
+
+msgid "Channel"
+msgstr ""
+
+msgid "Check"
+msgstr ""
+
+msgid "Check fileystems before mount"
+msgstr ""
+
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
+msgid "Checksum"
+msgstr ""
+
+msgid ""
+"Choose the firewall zone you want to assign to this interface. Select "
+"<em>unspecified</em> to remove the interface from the associated zone or "
+"fill out the <em>create</em> field to define a new zone and attach the "
+"interface to it."
+msgstr ""
+"이 인터페이스에 할당하고자 하는 firewall zone 을 선택하세요. 연결된 zone 으로"
+"부터 인터페이스를 제거하고 싶다면 <em>unspecified</em> 를 선택하세요. 새로"
+"운 zone 을 정의하고 인터페이스 연결을 원한다면 <em>create</em> 항목을 입력하"
+"세요."
+
+msgid ""
+"Choose the network(s) you want to attach to this wireless interface or fill "
+"out the <em>create</em> field to define a new network."
+msgstr ""
+"이 무선랜 인터페이스와 연결하고자 하는 네트워크(들)을 선택하세요. 혹은 새로"
+"운 네트워크를 정의할려면 <em>create</em> 을 작성하세요."
+
+msgid "Cipher"
+msgstr ""
+
+msgid "Cisco UDP encapsulation"
+msgstr ""
+
+msgid ""
+"Click \"Generate archive\" to download a tar archive of the current "
+"configuration files. To reset the firmware to its initial state, click "
+"\"Perform reset\" (only possible with squashfs images)."
+msgstr ""
+"현재 설정 파일에 대한 tar 아카이브 다운로드를 원한다면 \"아카이브 생성\" 버튼"
+"을 클릭하세요. Firmware 의 초기 설정 reset 을 원한다면 \"Reset 하기\" 를 클"
+"릭하세요. (squashfs 이미지들만 가능)."
+
+msgid "Client"
+msgstr ""
+
+msgid "Client ID to send when requesting DHCP"
+msgstr "DHCP 요청시 전송할 Client ID"
+
+msgid ""
+"Close inactive connection after the given amount of seconds, use 0 to "
+"persist connection"
+msgstr ""
+
+msgid "Close list..."
+msgstr "목록 닫기..."
+
+msgid "Collecting data..."
+msgstr "Data 를 수집중입니다..."
+
+msgid "Command"
+msgstr "명령어"
+
+msgid "Common Configuration"
+msgstr "공통 설정"
+
+msgid "Configuration"
+msgstr "설정"
+
+msgid "Configuration applied."
+msgstr ""
+
+msgid "Configuration files will be kept."
+msgstr ""
+
+msgid "Confirmation"
+msgstr "다시 확인"
+
+msgid "Connect"
+msgstr "연결"
+
+msgid "Connected"
+msgstr "연결 시간"
+
+msgid "Connection Limit"
+msgstr ""
+
+msgid "Connection to server fails when TLS cannot be used"
+msgstr ""
+
+msgid "Connections"
+msgstr "연결"
+
+msgid "Country"
+msgstr ""
+
+msgid "Country Code"
+msgstr ""
+
+msgid "Cover the following interface"
+msgstr ""
+
+msgid "Cover the following interfaces"
+msgstr ""
+
+msgid "Create / Assign firewall-zone"
+msgstr "Firewall-zone 생성 / 할당"
+
+msgid "Create Interface"
+msgstr ""
+
+msgid "Create a bridge over multiple interfaces"
+msgstr ""
+
+msgid "Critical"
+msgstr ""
+
+msgid "Cron Log Level"
+msgstr ""
+
+msgid "Custom Interface"
+msgstr "임의의 인터페이스"
+
+msgid "Custom delegated IPv6-prefix"
+msgstr ""
+
+msgid ""
+"Custom feed definitions, e.g. private feeds. This file can be preserved in a "
+"sysupgrade."
+msgstr ""
+"개인이 운영하는 feed 같은 정보를 입력할 수 있는 custom feed 목록입니다. 이 파"
+"일은 sysupgrade 시 입력된 정보가 유지됩니다."
+
+msgid "Custom feeds"
+msgstr "Custom feed 들"
+
+msgid ""
+"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
+"\">LED</abbr>s if possible."
+msgstr ""
+"원한다면 장치에 부착된 <abbr title=\"Light Emitting Diode\">LED</abbr> 들의 "
+"행동을 마음대로 변경할 수 있습니다."
+
+msgid "DHCP Leases"
+msgstr "DHCP 임대 정보"
+
+msgid "DHCP Server"
+msgstr "DHCP 서버"
+
+msgid "DHCP and DNS"
+msgstr "DHCP 와 DNS"
+
+msgid "DHCP client"
+msgstr "DHCP client"
+
+msgid "DHCP-Options"
+msgstr "DHCP-옵션들"
+
+msgid "DHCPv6 Leases"
+msgstr "DHCPv6 임대 정보"
+
+msgid "DHCPv6 client"
+msgstr ""
+
+msgid "DHCPv6-Mode"
+msgstr ""
+
+msgid "DHCPv6-Service"
+msgstr ""
+
+msgid "DNS"
+msgstr ""
+
+msgid "DNS forwardings"
+msgstr ""
+
+msgid "DNS-Label / FQDN"
+msgstr ""
+
+msgid "DNSSEC"
+msgstr ""
+
+msgid "DNSSEC check unsigned"
+msgstr ""
+
+msgid "DPD Idle Timeout"
+msgstr ""
+
+msgid "DS-Lite AFTR address"
+msgstr ""
+
+msgid "DSL"
+msgstr ""
+
+msgid "DSL Status"
+msgstr ""
+
+msgid "DSL line mode"
+msgstr ""
+
+msgid "DUID"
+msgstr ""
+
+msgid "Data Rate"
+msgstr ""
+
+msgid "Debug"
+msgstr ""
+
+msgid "Default %d"
+msgstr ""
+
+msgid "Default gateway"
+msgstr ""
+
+msgid "Default is stateless + stateful"
+msgstr ""
+
+msgid "Default route"
+msgstr ""
+
+msgid "Default state"
+msgstr "기본 상태"
+
+msgid "Define a name for this network."
+msgstr ""
+
+msgid ""
+"Define additional DHCP options, for example "
+"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
+"servers to clients."
+msgstr ""
+"추가적인 DHCP 옵션을 정의합니다. 예를 들어 "
+"\"<code>6,192.168.2.1,192.168.2.2</code>\" 는 client 에게 다른 DNS 서버를 세"
+"팅하도록 권고할 수 있습니다."
+
+msgid "Delete"
+msgstr "삭제"
+
+msgid "Delete this network"
+msgstr "이 네트워크를 삭제합니다"
+
+msgid "Description"
+msgstr "설명"
+
+msgid "Design"
+msgstr "디자인"
+
+msgid "Destination"
+msgstr ""
+
+msgid "Device"
+msgstr ""
+
+msgid "Device Configuration"
+msgstr "장치 설정"
+
+msgid "Device is rebooting..."
+msgstr ""
+
+msgid "Device unreachable"
+msgstr ""
+
+msgid "Diagnostics"
+msgstr "진단"
+
+msgid "Dial number"
+msgstr ""
+
+msgid "Directory"
+msgstr ""
+
+msgid "Disable"
+msgstr "비활성화"
+
+msgid ""
+"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
+"this interface."
+msgstr ""
+"이 인터페이스에 대해 <abbr title=\"Dynamic Host Configuration Protocol"
+"\">DHCP</abbr> 기능을 비활성합니다."
+
+msgid "Disable DNS setup"
+msgstr ""
+
+msgid "Disable Encryption"
+msgstr ""
+
+msgid "Disabled"
+msgstr ""
+
+msgid "Disabled (default)"
+msgstr ""
+
+msgid "Discard upstream RFC1918 responses"
+msgstr ""
+
+msgid "Displaying only packages containing"
+msgstr ""
+
+msgid "Distance Optimization"
+msgstr ""
+
+msgid "Distance to farthest network member in meters."
+msgstr ""
+
+msgid "Distribution feeds"
+msgstr "Distribution feed 들"
+
+msgid "Diversity"
+msgstr ""
+
+msgid ""
+"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
+"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
+"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
+"firewalls"
+msgstr ""
+"Dnsmasq 는 <abbr title=\"Network Address Translation\">NAT</abbr> 방화벽을 위"
+"한 <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>-서버와 "
+"<abbr title=\"Domain Name System\">DNS</abbr>-Forwarder 기능을 제공합니다."
+
+msgid "Do not cache negative replies, e.g. for not existing domains"
+msgstr ""
+
+msgid "Do not forward requests that cannot be answered by public name servers"
+msgstr ""
+
+msgid "Do not forward reverse lookups for local networks"
+msgstr ""
+
+msgid "Domain required"
+msgstr ""
+
+msgid "Domain whitelist"
+msgstr ""
+
+msgid "Don't Fragment"
+msgstr ""
+
+msgid ""
+"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
+"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
+msgstr ""
+
+msgid "Download and install package"
+msgstr "패키지 다운로드 후 설치"
+
+msgid "Download backup"
+msgstr "백업 다운로드"
+
+msgid "Dropbear Instance"
+msgstr ""
+
+msgid ""
+"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
+"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
+msgstr ""
+"Dropbear 는 <abbr title=\"Secure Shell\">SSH</abbr> network shell 접근과 "
+"<abbr title=\"Secure Copy\">SCP</abbr> 서버 기능을 제공합니다"
+
+msgid "Dual-Stack Lite (RFC6333)"
+msgstr ""
+
+msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
+msgstr ""
+
+msgid "Dynamic tunnel"
+msgstr ""
+
+msgid ""
+"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
+"having static leases will be served."
+msgstr ""
+"동적으로 DHCP 주소를 client 에게 할당합니다. 만약 비활성화시, static lease "
+"가 설정된 client 만 주소 제공이 이루어집니다."
+
+msgid "EA-bits length"
+msgstr ""
+
+msgid "EAP-Method"
+msgstr ""
+
+msgid "Edit"
+msgstr "수정"
+
+msgid ""
+"Edit the raw configuration data above to fix any error and hit \"Save\" to "
+"reload the page."
+msgstr ""
+
+msgid "Edit this interface"
+msgstr "이 인터페이스를 수정합니다"
+
+msgid "Edit this network"
+msgstr "이 네트워크를 수정합니다"
+
+msgid "Emergency"
+msgstr ""
+
+msgid "Enable"
+msgstr "활성화"
+
+msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
+msgstr "<abbr title=\"Spanning Tree Protocol\">STP</abbr> 활성화"
+
+msgid "Enable HE.net dynamic endpoint update"
+msgstr ""
+
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
+msgid "Enable IPv6 negotiation on the PPP link"
+msgstr ""
+
+msgid "Enable Jumbo Frame passthrough"
+msgstr ""
+
+msgid "Enable NTP client"
+msgstr "NTP client 활성화"
+
+msgid "Enable Single DES"
+msgstr ""
+
+msgid "Enable TFTP server"
+msgstr "TFTP 서버 활성화"
+
+msgid "Enable VLAN functionality"
+msgstr "VLAN 기능 활성화"
+
+msgid "Enable WPS pushbutton, requires WPA(2)-PSK"
+msgstr ""
+
+msgid "Enable learning and aging"
+msgstr ""
+
+msgid "Enable mirroring of incoming packets"
+msgstr ""
+
+msgid "Enable mirroring of outgoing packets"
+msgstr ""
+
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
+msgid "Enable this mount"
+msgstr ""
+
+msgid "Enable this swap"
+msgstr ""
+
+msgid "Enable/Disable"
+msgstr "활성/비활성"
+
+msgid "Enabled"
+msgstr "활성화됨"
+
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
+msgid "Enables the Spanning Tree Protocol on this bridge"
+msgstr "이 bridge 에 Spanning Tree Protocol 활성화합니다"
+
+msgid "Encapsulation mode"
+msgstr ""
+
+msgid "Encryption"
+msgstr "암호화"
+
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
+msgid "Erasing..."
+msgstr ""
+
+msgid "Error"
+msgstr ""
+
+msgid "Errored seconds (ES)"
+msgstr ""
+
+msgid "Ethernet Adapter"
+msgstr ""
+
+msgid "Ethernet Switch"
+msgstr "Ethernet 스위치"
+
+msgid "Exclude interfaces"
+msgstr ""
+
+msgid "Expand hosts"
+msgstr ""
+
+msgid "Expires"
+msgstr "만료 시간"
+
+msgid ""
+"Expiry time of leased addresses, minimum is 2 minutes (<code>2m</code>)."
+msgstr "임대한 주소의 유효 시간. 최소값은 2 분 (<code>2m</code>) 입니다."
+
+msgid "External"
+msgstr ""
+
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
+msgid "External system log server"
+msgstr "외부 system log 서버"
+
+msgid "External system log server port"
+msgstr "외부 system log 서버 포트"
+
+msgid "External system log server protocol"
+msgstr "외부 system log 서버 프로토콜"
+
+msgid "Extra SSH command options"
+msgstr ""
+
+msgid "File"
+msgstr ""
+
+msgid "Filename of the boot image advertised to clients"
+msgstr ""
+
+msgid "Filesystem"
+msgstr ""
+
+msgid "Filter"
+msgstr "필터"
+
+msgid "Filter private"
+msgstr ""
+
+msgid "Filter useless"
+msgstr ""
+
+msgid ""
+"Find all currently attached filesystems and swap and replace configuration "
+"with defaults based on what was detected"
+msgstr ""
+
+msgid "Find and join network"
+msgstr "네트워크 검색 및 연결합니다"
+
+msgid "Find package"
+msgstr "패키지 찾기"
+
+msgid "Finish"
+msgstr ""
+
+msgid "Firewall"
+msgstr "방화벽"
+
+msgid "Firewall Mark"
+msgstr ""
+
+msgid "Firewall Settings"
+msgstr "방화벽 설정"
+
+msgid "Firewall Status"
+msgstr "방화벽 상태"
+
+msgid "Firmware File"
+msgstr ""
+
+msgid "Firmware Version"
+msgstr "Firmware 버전"
+
+msgid "Fixed source port for outbound DNS queries"
+msgstr ""
+
+msgid "Flash Firmware"
+msgstr ""
+
+msgid "Flash image..."
+msgstr "이미지로 Flash..."
+
+msgid "Flash new firmware image"
+msgstr "새로운 firmware 이미지로 flash"
+
+msgid "Flash operations"
+msgstr "Flash 작업"
+
+msgid "Flashing..."
+msgstr ""
+
+msgid "Force"
+msgstr "강제하기"
+
+msgid "Force CCMP (AES)"
+msgstr ""
+
+msgid "Force DHCP on this network even if another server is detected."
+msgstr "다른 DHCP 서버가 탐지되더라도 이 네트워크에 DHCP 를 강제합니다."
+
+msgid "Force TKIP"
+msgstr ""
+
+msgid "Force TKIP and CCMP (AES)"
+msgstr ""
+
+msgid "Force use of NAT-T"
+msgstr ""
+
+msgid "Form token mismatch"
+msgstr ""
+
+msgid "Forward DHCP traffic"
+msgstr ""
+
+msgid "Forward Error Correction Seconds (FECS)"
+msgstr ""
+
+msgid "Forward broadcast traffic"
+msgstr ""
+
+msgid "Forwarding mode"
+msgstr ""
+
+msgid "Fragmentation Threshold"
+msgstr ""
+
+msgid "Frame Bursting"
+msgstr ""
+
+msgid "Free"
+msgstr "이용 가능한 양"
+
+msgid "Free space"
+msgstr "여유 공간"
+
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
+msgid "GHz"
+msgstr ""
+
+msgid "GPRS only"
+msgstr ""
+
+msgid "Gateway"
+msgstr ""
+
+msgid "Gateway ports"
+msgstr ""
+
+msgid "General Settings"
+msgstr "기본 설정"
+
+msgid "General Setup"
+msgstr "기본 설정"
+
+msgid "General options for opkg"
+msgstr "opkg 명령의 기본 옵션들"
+
+msgid "Generate Config"
+msgstr ""
+
+msgid "Generate archive"
+msgstr "아카이브 생성"
+
+msgid "Generic 802.11%s Wireless Controller"
+msgstr ""
+
+msgid "Given password confirmation did not match, password not changed!"
+msgstr ""
+
+msgid "Global Settings"
+msgstr ""
+
+msgid "Global network options"
+msgstr ""
+
+msgid "Go to password configuration..."
+msgstr "암호 설정 하기"
+
+msgid "Go to relevant configuration page"
+msgstr ""
+
+msgid "Group Password"
+msgstr ""
+
+msgid "Guest"
+msgstr ""
+
+msgid "HE.net password"
+msgstr ""
+
+msgid "HE.net username"
+msgstr ""
+
+msgid "HT mode (802.11n)"
+msgstr ""
+
+msgid "Handler"
+msgstr ""
+
+msgid "Hang Up"
+msgstr ""
+
+msgid "Header Error Code Errors (HEC)"
+msgstr ""
+
+msgid "Heartbeat"
+msgstr ""
+
+msgid ""
+"Here you can configure the basic aspects of your device like its hostname or "
+"the timezone."
+msgstr ""
+"여기서 호스트이름이나 시간대와 같은 기본적인 장비 설정을 할 수 있습니다."
+
+msgid ""
+"Here you can paste public SSH-Keys (one per line) for SSH public-key "
+"authentication."
+msgstr ""
+"아래에 SSH public-key 인증을 위한 공개 SSH-Key 들 (한 줄당 한개) 를 입력할 "
+"수 있습니다."
+
+msgid "Hermes 802.11b Wireless Controller"
+msgstr ""
+
+msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
+msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr> 숨기기"
+
+msgid "Host"
+msgstr "호스트"
+
+msgid "Host entries"
+msgstr "호스트 목록들"
+
+msgid "Host expiry timeout"
+msgstr ""
+
+msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
+msgstr "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> 혹은 Network"
+
+msgid "Hostname"
+msgstr "호스트이름"
+
+msgid "Hostname to send when requesting DHCP"
+msgstr "DHCP 요청시 전달할 호스트이름"
+
+msgid "Hostnames"
+msgstr "호스트이름"
+
+msgid "Hybrid"
+msgstr ""
+
+msgid "IKE DH Group"
+msgstr ""
+
+msgid "IP Addresses"
+msgstr ""
+
+msgid "IP address"
+msgstr "IP 주소"
+
+msgid "IPv4"
+msgstr ""
+
+msgid "IPv4 Firewall"
+msgstr "IPv4 방화벽"
+
+msgid "IPv4 WAN Status"
+msgstr "IPv4 WAN 상태"
+
+msgid "IPv4 address"
+msgstr "IPv4 주소"
+
+msgid "IPv4 and IPv6"
+msgstr "IPv4 와 IPv6"
+
+msgid "IPv4 assignment length"
+msgstr ""
+
+msgid "IPv4 broadcast"
+msgstr ""
+
+msgid "IPv4 gateway"
+msgstr ""
+
+msgid "IPv4 netmask"
+msgstr ""
+
+msgid "IPv4 only"
+msgstr ""
+
+msgid "IPv4 prefix"
+msgstr ""
+
+msgid "IPv4 prefix length"
+msgstr ""
+
+msgid "IPv4-Address"
+msgstr "IPv4-주소"
+
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
+msgid "IPv6"
+msgstr "IPv6"
+
+msgid "IPv6 Firewall"
+msgstr "IPv6 방화벽"
+
+msgid "IPv6 Neighbours"
+msgstr "IPv6 Neighbour 들"
+
+msgid "IPv6 Settings"
+msgstr "IPv6 설정"
+
+msgid "IPv6 ULA-Prefix"
+msgstr ""
+
+msgid "IPv6 WAN Status"
+msgstr "IPv6 WAN 상태"
+
+msgid "IPv6 address"
+msgstr ""
+
+msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
+msgstr ""
+
+msgid "IPv6 assignment hint"
+msgstr ""
+
+msgid "IPv6 assignment length"
+msgstr ""
+
+msgid "IPv6 gateway"
+msgstr ""
+
+msgid "IPv6 only"
+msgstr ""
+
+msgid "IPv6 prefix"
+msgstr ""
+
+msgid "IPv6 prefix length"
+msgstr ""
+
+msgid "IPv6 routed prefix"
+msgstr ""
+
+msgid "IPv6-Address"
+msgstr "IPv6-주소"
+
+msgid "IPv6-PD"
+msgstr ""
+
+msgid "IPv6-in-IPv4 (RFC4213)"
+msgstr ""
+
+msgid "IPv6-over-IPv4 (6rd)"
+msgstr ""
+
+msgid "IPv6-over-IPv4 (6to4)"
+msgstr ""
+
+msgid "Identity"
+msgstr ""
+
+msgid "If checked, 1DES is enaled"
+msgstr ""
+
+msgid "If checked, encryption is disabled"
+msgstr ""
+
+msgid ""
+"If specified, mount the device by its UUID instead of a fixed device node"
+msgstr ""
+
+msgid ""
+"If specified, mount the device by the partition label instead of a fixed "
+"device node"
+msgstr ""
+
+msgid "If unchecked, no default route is configured"
+msgstr "체크하지 않을 경우, 기본 route 가 설정되지 않습니다"
+
+msgid "If unchecked, the advertised DNS server addresses are ignored"
+msgstr "체크하지 않을 경우, 사용하도록 권장된 DNS 주소는 무시됩니다"
+
+msgid ""
+"If your physical memory is insufficient unused data can be temporarily "
+"swapped to a swap-device resulting in a higher amount of usable <abbr title="
+"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
+"slow process as the swap-device cannot be accessed with the high datarates "
+"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
+msgstr ""
+
+msgid "Ignore <code>/etc/hosts</code>"
+msgstr "<code>/etc/hosts</code> 파일 무시"
+
+msgid "Ignore interface"
+msgstr "인터페이스 무시"
+
+msgid "Ignore resolve file"
+msgstr "resolve 파일 무시"
+
+msgid "Image"
+msgstr "이미지"
+
+msgid "In"
+msgstr "In"
+
+msgid ""
+"In order to prevent unauthorized access to the system, your request has been "
+"blocked. Click \"Continue »\" below to return to the previous page."
+msgstr ""
+
+msgid "Inactivity timeout"
+msgstr ""
+
+msgid "Inbound:"
+msgstr ""
+
+msgid "Info"
+msgstr ""
+
+msgid "Initscript"
+msgstr ""
+
+msgid "Initscripts"
+msgstr "Initscript 들"
+
+msgid "Install"
+msgstr "설치"
+
+msgid "Install iputils-traceroute6 for IPv6 traceroute"
+msgstr ""
+
+msgid "Install package %q"
+msgstr ""
+
+msgid "Install protocol extensions..."
+msgstr ""
+
+msgid "Installed packages"
+msgstr "설치된 패키지"
+
+msgid "Interface"
+msgstr "인터페이스"
+
+msgid "Interface Configuration"
+msgstr "인터페이스 설정"
+
+msgid "Interface Overview"
+msgstr "인터페이스 개요"
+
+msgid "Interface is reconnecting..."
+msgstr ""
+
+msgid "Interface is shutting down..."
+msgstr ""
+
+msgid "Interface name"
+msgstr "인터페이스 이름"
+
+msgid "Interface not present or not connected yet."
+msgstr ""
+
+msgid "Interface reconnected"
+msgstr ""
+
+msgid "Interface shut down"
+msgstr ""
+
+msgid "Interfaces"
+msgstr "인터페이스"
+
+msgid "Internal"
+msgstr ""
+
+msgid "Internal Server Error"
+msgstr ""
+
+msgid "Invalid"
+msgstr ""
+
+msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
+msgstr ""
+
+msgid "Invalid VLAN ID given! Only unique IDs are allowed"
+msgstr ""
+
+msgid "Invalid username and/or password! Please try again."
+msgstr ""
+
+msgid ""
+"It appears that you are trying to flash an image that does not fit into the "
+"flash memory, please verify the image file!"
+msgstr ""
+
+msgid "JavaScript required!"
+msgstr ""
+
+msgid "Join Network"
+msgstr "네트워크 연결"
+
+msgid "Join Network: Wireless Scan"
+msgstr "네트워크 연결: 무선랜 스캔 결과"
+
+msgid "Joining Network: %q"
+msgstr "네트워크 연결중: %q"
+
+msgid "Keep settings"
+msgstr "설정 유지"
+
+msgid "Kernel Log"
+msgstr "Kernel 로그"
+
+msgid "Kernel Version"
+msgstr "Kernel 버전"
+
+msgid "Key"
+msgstr ""
+
+msgid "Key #%d"
+msgstr ""
+
+msgid "Kill"
+msgstr ""
+
+msgid "L2TP"
+msgstr ""
+
+msgid "L2TP Server"
+msgstr ""
+
+msgid "LCP echo failure threshold"
+msgstr ""
+
+msgid "LCP echo interval"
+msgstr ""
+
+msgid "LLC"
+msgstr ""
+
+msgid "Label"
+msgstr ""
+
+msgid "Language"
+msgstr "언어"
+
+msgid "Language and Style"
+msgstr "언어와 스타일"
+
+msgid "Latency"
+msgstr ""
+
+msgid "Leaf"
+msgstr ""
+
+msgid "Lease time"
+msgstr "임대 시간"
+
+msgid "Lease validity time"
+msgstr ""
+
+msgid "Leasefile"
+msgstr ""
+
+msgid "Leasetime"
+msgstr "임대 시간"
+
+msgid "Leasetime remaining"
+msgstr "남아있는 임대 시간"
+
+msgid "Leave empty to autodetect"
+msgstr ""
+
+msgid "Leave empty to use the current WAN address"
+msgstr ""
+
+msgid "Legend:"
+msgstr ""
+
+msgid "Limit"
+msgstr "제한"
+
+msgid "Limit DNS service to subnets interfaces on which we are serving DNS."
+msgstr ""
+"DNS 를 제공하기로한 subnet 인터페이스들에 대해서만 DNS 서비스를 제공합니다."
+
+msgid "Limit listening to these interfaces, and loopback."
+msgstr ""
+
+msgid "Line Attenuation (LATN)"
+msgstr ""
+
+msgid "Line Mode"
+msgstr ""
+
+msgid "Line State"
+msgstr ""
+
+msgid "Line Uptime"
+msgstr ""
+
+msgid "Link On"
+msgstr ""
+
+msgid ""
+"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
+"requests to"
+msgstr ""
+
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
+msgid "List of SSH key files for auth"
+msgstr ""
+
+msgid "List of domains to allow RFC1918 responses for"
+msgstr ""
+
+msgid "List of hosts that supply bogus NX domain results"
+msgstr ""
+
+msgid "Listen Interfaces"
+msgstr ""
+
+msgid "Listen Port"
+msgstr ""
+
+msgid "Listen only on the given interface or, if unspecified, on all"
+msgstr ""
+"지정한 인터페이스에만 listening 하며 미지정시 모든 인터페이스에 적용됩니다"
+
+msgid "Listening port for inbound DNS queries"
+msgstr ""
+
+msgid "Load"
+msgstr "부하"
+
+msgid "Load Average"
+msgstr "부하 평균"
+
+msgid "Loading"
+msgstr ""
+
+msgid "Local IP address to assign"
+msgstr ""
+
+msgid "Local IPv4 address"
+msgstr ""
+
+msgid "Local IPv6 address"
+msgstr ""
+
+msgid "Local Service Only"
+msgstr ""
+
+msgid "Local Startup"
+msgstr "Local 시작 프로그램"
+
+msgid "Local Time"
+msgstr "지역 시간"
+
+msgid "Local domain"
+msgstr ""
+
+msgid ""
+"Local domain specification. Names matching this domain are never forwarded "
+"and are resolved from DHCP or hosts files only"
+msgstr ""
+
+msgid "Local domain suffix appended to DHCP names and hosts file entries"
+msgstr ""
+
+msgid "Local server"
+msgstr ""
+
+msgid ""
+"Localise hostname depending on the requesting subnet if multiple IPs are "
+"available"
+msgstr ""
+
+msgid "Localise queries"
+msgstr ""
+
+msgid "Locked to channel %s used by: %s"
+msgstr ""
+
+msgid "Log output level"
+msgstr "Log output 레벨"
+
+msgid "Log queries"
+msgstr ""
+
+msgid "Logging"
+msgstr ""
+
+msgid "Login"
+msgstr "로그인"
+
+msgid "Logout"
+msgstr "로그아웃"
+
+msgid "Loss of Signal Seconds (LOSS)"
+msgstr ""
+
+msgid "Lowest leased address as offset from the network address."
+msgstr "임대되는 주소의 최소 시작점. (네트워크 주소로 부터의 offset)"
+
+msgid "MAC-Address"
+msgstr "MAC-주소"
+
+msgid "MAC-Address Filter"
+msgstr "MAC-주소 필터"
+
+msgid "MAC-Filter"
+msgstr "MAC-필터"
+
+msgid "MAC-List"
+msgstr ""
+
+msgid "MAP / LW4over6"
+msgstr ""
+
+msgid "MB/s"
+msgstr ""
+
+msgid "MD5"
+msgstr ""
+
+msgid "MHz"
+msgstr ""
+
+msgid "MTU"
+msgstr ""
+
+msgid ""
+"Make sure to clone the root filesystem using something like the commands "
+"below:"
+msgstr ""
+
+msgid "Manual"
+msgstr ""
+
+msgid "Max. Attainable Data Rate (ATTNDR)"
+msgstr ""
+
+msgid "Maximum allowed number of active DHCP leases"
+msgstr "Active DHCP lease 건의 최대 허용 숫자"
+
+msgid "Maximum allowed number of concurrent DNS queries"
+msgstr "허용되는 최대 동시 DNS query 수"
+
+msgid "Maximum allowed size of EDNS.0 UDP packets"
+msgstr "허용된 최대 EDNS.0 UDP 패킷 크기"
+
+msgid "Maximum amount of seconds to wait for the modem to become ready"
+msgstr ""
+
+msgid "Maximum hold time"
+msgstr ""
+
+msgid ""
+"Maximum length of the name is 15 characters including the automatic protocol/"
+"bridge prefix (br-, 6in4-, pppoe- etc.)"
+msgstr ""
+
+msgid "Maximum number of leased addresses."
+msgstr "임대될 수 있는 주소의 최대 숫자."
+
+msgid "Mbit/s"
+msgstr ""
+
+msgid "Memory"
+msgstr "메모리"
+
+msgid "Memory usage (%)"
+msgstr "메모리 사용량 (%)"
+
+msgid "Metric"
+msgstr ""
+
+msgid "Minimum hold time"
+msgstr ""
+
+msgid "Mirror monitor port"
+msgstr ""
+
+msgid "Mirror source port"
+msgstr ""
+
+msgid "Missing protocol extension for proto %q"
+msgstr ""
+
+msgid "Mobility Domain"
+msgstr ""
+
+msgid "Mode"
+msgstr ""
+
+msgid "Model"
+msgstr "모델"
+
+msgid "Modem device"
+msgstr ""
+
+msgid "Modem init timeout"
+msgstr ""
+
+msgid "Monitor"
+msgstr ""
+
+msgid "Mount Entry"
+msgstr ""
+
+msgid "Mount Point"
+msgstr ""
+
+msgid "Mount Points"
+msgstr ""
+
+msgid "Mount Points - Mount Entry"
+msgstr ""
+
+msgid "Mount Points - Swap Entry"
+msgstr ""
+
+msgid ""
+"Mount Points define at which point a memory device will be attached to the "
+"filesystem"
+msgstr ""
+
+msgid "Mount filesystems not specifically configured"
+msgstr ""
+
+msgid "Mount options"
+msgstr ""
+
+msgid "Mount point"
+msgstr ""
+
+msgid "Mount swap not specifically configured"
+msgstr ""
+
+msgid "Mounted file systems"
+msgstr ""
+
+msgid "Move down"
+msgstr ""
+
+msgid "Move up"
+msgstr ""
+
+msgid "Multicast address"
+msgstr ""
+
+msgid "NAS ID"
+msgstr ""
+
+msgid "NAT-T Mode"
+msgstr ""
+
+msgid "NAT64 Prefix"
+msgstr ""
+
+msgid "NDP-Proxy"
+msgstr ""
+
+msgid "NT Domain"
+msgstr ""
+
+msgid "NTP server candidates"
+msgstr "NTP 서버 목록"
+
+msgid "NTP sync time-out"
+msgstr ""
+
+msgid "Name"
+msgstr "이름"
+
+msgid "Name of the new interface"
+msgstr ""
+
+msgid "Name of the new network"
+msgstr ""
+
+msgid "Navigation"
+msgstr ""
+
+msgid "Netmask"
+msgstr ""
+
+msgid "Network"
+msgstr "네트워크"
+
+msgid "Network Utilities"
+msgstr "네트워크 유틸리티"
+
+msgid "Network boot image"
+msgstr "네트워크 boot 이미지"
+
+msgid "Network without interfaces."
+msgstr ""
+
+msgid "Next »"
+msgstr ""
+
+msgid "No DHCP Server configured for this interface"
+msgstr ""
+
+msgid "No NAT-T"
+msgstr ""
+
+msgid "No chains in this table"
+msgstr "이 table 에는 정의된 chain 이 없음"
+
+msgid "No files found"
+msgstr ""
+
+msgid "No information available"
+msgstr "이용 가능한 정보가 없습니다"
+
+msgid "No negative cache"
+msgstr ""
+
+msgid "No network configured on this device"
+msgstr ""
+
+msgid "No network name specified"
+msgstr ""
+
+msgid "No package lists available"
+msgstr ""
+
+msgid "No password set!"
+msgstr "암호 설정을 해주세요!"
+
+msgid "No rules in this chain"
+msgstr ""
+
+msgid "No zone assigned"
+msgstr ""
+
+msgid "Noise"
+msgstr "노이즈"
+
+msgid "Noise Margin (SNR)"
+msgstr ""
+
+msgid "Noise:"
+msgstr ""
+
+msgid "Non Pre-emtive CRC errors (CRC_P)"
+msgstr ""
+
+msgid "Non-wildcard"
+msgstr ""
+
+msgid "None"
+msgstr ""
+
+msgid "Normal"
+msgstr ""
+
+msgid "Not Found"
+msgstr ""
+
+msgid "Not associated"
+msgstr ""
+
+msgid "Not connected"
+msgstr "연결되지 않음"
+
+msgid "Note: Configuration files will be erased."
+msgstr ""
+
+msgid "Note: interface name length"
+msgstr ""
+
+msgid "Notice"
+msgstr ""
+
+msgid "Nslookup"
+msgstr ""
+
+msgid "OK"
+msgstr ""
+
+msgid "OPKG-Configuration"
+msgstr "OPKG-설정"
+
+msgid "Obfuscated Group Password"
+msgstr ""
+
+msgid "Obfuscated Password"
+msgstr ""
+
+msgid "Off-State Delay"
+msgstr ""
+
+msgid ""
+"On this page you can configure the network interfaces. You can bridge "
+"several interfaces by ticking the \"bridge interfaces\" field and enter the "
+"names of several network interfaces separated by spaces. You can also use "
+"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
+"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
+"<samp>eth0.1</samp>)."
+msgstr ""
+"이 페이지에서는 네트워크 인터페이스를 설정할 수 있습니다. \"Bridge 인터페이스"
+"\" 항목을 클릭하고, 공백으로 구분된 네트워크 인터페이스들의 이름을 적는 방식"
+"으로 여러 인터페이스들을 bridge 할 수 있습니다. 또한 <abbr title=\"Virtual "
+"Local Area Network\">VLAN</abbr> 표기법인 <samp>INTERFACE.VLANNR</samp> "
+"(<abbr title=\"for example\">예</abbr>: <samp>eth0.1</samp>) 를 사용하실 수 "
+"있습니다."
+
+msgid "On-State Delay"
+msgstr ""
+
+msgid "One of hostname or mac address must be specified!"
+msgstr ""
+
+msgid "One or more fields contain invalid values!"
+msgstr ""
+
+msgid "One or more invalid/required values on tab"
+msgstr ""
+
+msgid "One or more required fields have no value!"
+msgstr ""
+
+msgid "Open list..."
+msgstr "목록 열람..."
+
+msgid "OpenConnect (CISCO AnyConnect)"
+msgstr ""
+
+msgid "Operating frequency"
+msgstr "동작 주파수"
+
+msgid "Option changed"
+msgstr "변경된 option"
+
+msgid "Option removed"
+msgstr "삭제된 option"
+
+msgid "Optional"
+msgstr ""
+
+msgid "Optional, specify to override default server (tic.sixxs.net)"
+msgstr ""
+
+msgid "Optional, use when the SIXXS account has more than one tunnel"
+msgstr ""
+
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
+msgid "Options"
+msgstr ""
+
+msgid "Other:"
+msgstr ""
+
+msgid "Out"
+msgstr ""
+
+msgid "Outbound:"
+msgstr ""
+
+msgid "Output Interface"
+msgstr ""
+
+msgid "Override MAC address"
+msgstr "MAC 주소 덮어쓰기"
+
+msgid "Override MTU"
+msgstr "MTU 덮어쓰기"
+
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
+msgid "Override default interface name"
+msgstr "기본 인터페이스 이름을 덮어씁니다"
+
+msgid "Override the gateway in DHCP responses"
+msgstr ""
+
+msgid ""
+"Override the netmask sent to clients. Normally it is calculated from the "
+"subnet that is served."
+msgstr ""
+"Client 에 전달될 netmask 를 덮어 쓸 수 있습니다. 보통 해당 값은 제공되는 "
+"subnet 에 따라 자동 계산됩니다."
+
+msgid "Override the table used for internal routes"
+msgstr ""
+
+msgid "Overview"
+msgstr "개요"
+
+msgid "Owner"
+msgstr ""
+
+msgid "PAP/CHAP password"
+msgstr ""
+
+msgid "PAP/CHAP username"
+msgstr ""
+
+msgid "PID"
+msgstr ""
+
+msgid "PIN"
+msgstr ""
+
+msgid "PMK R1 Push"
+msgstr ""
+
+msgid "PPP"
+msgstr ""
+
+msgid "PPPoA Encapsulation"
+msgstr ""
+
+msgid "PPPoATM"
+msgstr ""
+
+msgid "PPPoE"
+msgstr ""
+
+msgid "PPPoSSH"
+msgstr ""
+
+msgid "PPtP"
+msgstr ""
+
+msgid "PSID offset"
+msgstr ""
+
+msgid "PSID-bits length"
+msgstr ""
+
+msgid "PTM/EFM (Packet Transfer Mode)"
+msgstr ""
+
+msgid "Package libiwinfo required!"
+msgstr ""
+
+msgid "Package lists are older than 24 hours"
+msgstr ""
+
+msgid "Package name"
+msgstr "패키지 이름"
+
+msgid "Packets"
+msgstr ""
+
+msgid "Part of zone %q"
+msgstr ""
+
+msgid "Password"
+msgstr "암호"
+
+msgid "Password authentication"
+msgstr "암호 인증"
+
+msgid "Password of Private Key"
+msgstr ""
+
+msgid "Password of inner Private Key"
+msgstr ""
+
+msgid "Password successfully changed!"
+msgstr ""
+
+msgid "Path to CA-Certificate"
+msgstr ""
+
+msgid "Path to Client-Certificate"
+msgstr ""
+
+msgid "Path to Private Key"
+msgstr ""
+
+msgid "Path to executable which handles the button event"
+msgstr ""
+
+msgid "Path to inner CA-Certificate"
+msgstr ""
+
+msgid "Path to inner Client-Certificate"
+msgstr ""
+
+msgid "Path to inner Private Key"
+msgstr ""
+
+msgid "Peak:"
+msgstr "최고치:"
+
+msgid "Peer IP address to assign"
+msgstr ""
+
+msgid "Peers"
+msgstr ""
+
+msgid "Perfect Forward Secrecy"
+msgstr ""
+
+msgid "Perform reboot"
+msgstr "재부팅하기"
+
+msgid "Perform reset"
+msgstr "Reset 하기"
+
+msgid "Persistent Keep Alive"
+msgstr ""
+
+msgid "Phy Rate:"
+msgstr ""
+
+msgid "Physical Settings"
+msgstr "Physical 설정"
+
+msgid "Ping"
+msgstr ""
+
+msgid "Pkts."
+msgstr "Pkts."
+
+msgid "Please enter your username and password."
+msgstr "사용자이름과 암호를 입력해 주세요."
+
+msgid "Policy"
+msgstr ""
+
+msgid "Port"
+msgstr "포트"
+
+msgid "Port status:"
+msgstr "포트 상태:"
+
+msgid "Power Management Mode"
+msgstr ""
+
+msgid "Pre-emtive CRC errors (CRCP_P)"
+msgstr ""
+
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
+msgid ""
+"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
+"ignore failures"
+msgstr ""
+
+msgid "Prevent listening on these interfaces."
+msgstr ""
+
+msgid "Prevents client-to-client communication"
+msgstr ""
+
+msgid "Prism2/2.5/3 802.11b Wireless Controller"
+msgstr ""
+
+msgid "Private Key"
+msgstr ""
+
+msgid "Proceed"
+msgstr ""
+
+msgid "Processes"
+msgstr "프로세스"
+
+msgid "Profile"
+msgstr ""
+
+msgid "Prot."
+msgstr "Prot."
+
+msgid "Protocol"
+msgstr "프로토콜"
+
+msgid "Protocol family"
+msgstr ""
+
+msgid "Protocol of the new interface"
+msgstr ""
+
+msgid "Protocol support is not installed"
+msgstr ""
+
+msgid "Provide NTP server"
+msgstr ""
+
+msgid "Provide new network"
+msgstr "새로운 네트워크를 추가합니다"
+
+msgid "Pseudo Ad-Hoc (ahdemo)"
+msgstr ""
+
+msgid "Public Key"
+msgstr ""
+
+msgid "Public prefix routed to this device for distribution to clients."
+msgstr ""
+
+msgid "QMI Cellular"
+msgstr ""
+
+msgid "Quality"
+msgstr ""
+
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
+msgid "RFC3947 NAT-T mode"
+msgstr ""
+
+msgid "RTS/CTS Threshold"
+msgstr ""
+
+msgid "RX"
+msgstr ""
+
+msgid "RX Rate"
+msgstr ""
+
+msgid "RaLink 802.11%s Wireless Controller"
+msgstr ""
+
+msgid "Radius-Accounting-Port"
+msgstr ""
+
+msgid "Radius-Accounting-Secret"
+msgstr ""
+
+msgid "Radius-Accounting-Server"
+msgstr ""
+
+msgid "Radius-Authentication-Port"
+msgstr ""
+
+msgid "Radius-Authentication-Secret"
+msgstr ""
+
+msgid "Radius-Authentication-Server"
+msgstr ""
+
+msgid ""
+"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
+"Configuration Protocol\">DHCP</abbr>-Server"
+msgstr ""
+"<code>/etc/ethers</code> 파일을 읽어 <abbr title=\"Dynamic Host "
+"Configuration Protocol\">DHCP</abbr>-서버를 설정합니다"
+
+msgid ""
+"Really delete this interface? The deletion cannot be undone!\\nYou might "
+"lose access to this device if you are connected via this interface."
+msgstr ""
+
+msgid ""
+"Really delete this wireless network? The deletion cannot be undone!\\nYou "
+"might lose access to this device if you are connected via this network."
+msgstr ""
+
+msgid "Really reset all changes?"
+msgstr ""
+
+msgid ""
+"Really shut down network?\\nYou might lose access to this device if you are "
+"connected via this interface."
+msgstr ""
+"정말로 네트워크를 shutdown 하시겠습니까?\\n이 인터페이스를 통해 연결하였다면 "
+"접속이 끊어질 수 있습니다."
+
+msgid ""
+"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
+"you are connected via this interface."
+msgstr ""
+
+msgid "Really switch protocol?"
+msgstr "정말 프로토콜 변경을 원하세요?"
+
+msgid "Realtime Connections"
+msgstr "실시간 연결수"
+
+msgid "Realtime Graphs"
+msgstr "실시간 그래프"
+
+msgid "Realtime Load"
+msgstr "실시간 부하"
+
+msgid "Realtime Traffic"
+msgstr "실시간 트래픽"
+
+msgid "Realtime Wireless"
+msgstr ""
+
+msgid "Reassociation Deadline"
+msgstr ""
+
+msgid "Rebind protection"
+msgstr ""
+
+msgid "Reboot"
+msgstr "재부팅"
+
+msgid "Rebooting..."
+msgstr ""
+
+msgid "Reboots the operating system of your device"
+msgstr "장치의 운영체제를 재부팅합니다"
+
+msgid "Receive"
+msgstr ""
+
+msgid "Receiver Antenna"
+msgstr ""
+
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
+msgid "Reconnect this interface"
+msgstr "이 인터페이스를 재연결합니다"
+
+msgid "Reconnecting interface"
+msgstr "인터페이스 재연결중입니다"
+
+msgid "References"
+msgstr ""
+
+msgid "Relay"
+msgstr ""
+
+msgid "Relay Bridge"
+msgstr ""
+
+msgid "Relay between networks"
+msgstr ""
+
+msgid "Relay bridge"
+msgstr ""
+
+msgid "Remote IPv4 address"
+msgstr ""
+
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
+msgid "Remove"
+msgstr "제거"
+
+msgid "Repeat scan"
+msgstr ""
+
+msgid "Replace entry"
+msgstr ""
+
+msgid "Replace wireless configuration"
+msgstr ""
+
+msgid "Request IPv6-address"
+msgstr ""
+
+msgid "Request IPv6-prefix of length"
+msgstr ""
+
+msgid "Require TLS"
+msgstr ""
+
+msgid "Required"
+msgstr ""
+
+msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
+msgstr "특정 ISP 들에 요구됨. 예: Charter (DOCSIS 3 기반)"
+
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
+msgid ""
+"Requires upstream supports DNSSEC; verify unsigned domain responses really "
+"come from unsigned domains"
+msgstr ""
+
+msgid "Reset"
+msgstr "초기화"
+
+msgid "Reset Counters"
+msgstr "Counter 초기화"
+
+msgid "Reset to defaults"
+msgstr "초기값으로 reset"
+
+msgid "Resolv and Hosts Files"
+msgstr "Resolv 와 Hosts 파일"
+
+msgid "Resolve file"
+msgstr "Resolve 파일"
+
+msgid "Restart"
+msgstr "재시작"
+
+msgid "Restart Firewall"
+msgstr "방화벽 재시작"
+
+msgid "Restore backup"
+msgstr "백업 복구"
+
+msgid "Reveal/hide password"
+msgstr "암호 보이기/숨기기"
+
+msgid "Revert"
+msgstr "변경 취소"
+
+msgid "Root"
+msgstr ""
+
+msgid "Root directory for files served via TFTP"
+msgstr "TFTP 를 통해 제공되는 파일들의 root 디렉토리"
+
+msgid "Root preparation"
+msgstr ""
+
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
+msgid "Routed IPv6 prefix for downstream interfaces"
+msgstr ""
+
+msgid "Router Advertisement-Service"
+msgstr ""
+
+msgid "Router Password"
+msgstr "라우터 암호"
+
+msgid "Routes"
+msgstr "Route 경로"
+
+msgid ""
+"Routes specify over which interface and gateway a certain host or network "
+"can be reached."
+msgstr ""
+"Route 경로는 특정 호스트 혹은 네트워크가 사용해야 할 인터페이스와 gateway 정"
+"보를 나타냅니다."
+
+msgid "Run a filesystem check before mounting the device"
+msgstr ""
+
+msgid "Run filesystem check"
+msgstr ""
+
+msgid "SHA256"
+msgstr ""
+
+msgid ""
+"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
+"use 6in4 instead"
+msgstr ""
+
+msgid "SIXXS-handle[/Tunnel-ID]"
+msgstr ""
+
+msgid "SNR"
+msgstr ""
+
+msgid "SSH Access"
+msgstr ""
+
+msgid "SSH server address"
+msgstr ""
+
+msgid "SSH server port"
+msgstr ""
+
+msgid "SSH username"
+msgstr ""
+
+msgid "SSH-Keys"
+msgstr ""
+
+msgid "SSID"
+msgstr "SSID"
+
+msgid "Save"
+msgstr "저장"
+
+msgid "Save & Apply"
+msgstr "저장 & 적용"
+
+msgid "Save & Apply"
+msgstr "저장 & 적용"
+
+msgid "Scan"
+msgstr "Scan 하기"
+
+msgid "Scheduled Tasks"
+msgstr "작업 관리"
+
+msgid "Section added"
+msgstr "추가된 section"
+
+msgid "Section removed"
+msgstr "삭제된 section"
+
+msgid "See \"mount\" manpage for details"
+msgstr ""
+
+msgid ""
+"Send LCP echo requests at the given interval in seconds, only effective in "
+"conjunction with failure threshold"
+msgstr ""
+
+msgid "Separate Clients"
+msgstr ""
+
+msgid "Server Settings"
+msgstr "서버 설정"
+
+msgid "Server password"
+msgstr ""
+
+msgid ""
+"Server password, enter the specific password of the tunnel when the username "
+"contains the tunnel ID"
+msgstr ""
+
+msgid "Server username"
+msgstr ""
+
+msgid "Service Name"
+msgstr ""
+
+msgid "Service Type"
+msgstr ""
+
+msgid "Services"
+msgstr "서비스"
+
+msgid "Set up Time Synchronization"
+msgstr ""
+
+msgid "Setup DHCP Server"
+msgstr ""
+
+msgid "Severely Errored Seconds (SES)"
+msgstr ""
+
+msgid "Short GI"
+msgstr ""
+
+msgid "Show current backup file list"
+msgstr "현재 백업 파일 목록 보기"
+
+msgid "Shutdown this interface"
+msgstr "이 인터페이스를 정지합니다"
+
+msgid "Shutdown this network"
+msgstr "이 네트워크를 shutdown 합니다"
+
+msgid "Signal"
+msgstr "신호"
+
+msgid "Signal Attenuation (SATN)"
+msgstr ""
+
+msgid "Signal:"
+msgstr ""
+
+msgid "Size"
+msgstr "Size"
+
+msgid "Size (.ipk)"
+msgstr "크기 (.ipk)"
+
+msgid "Skip"
+msgstr ""
+
+msgid "Skip to content"
+msgstr ""
+
+msgid "Skip to navigation"
+msgstr ""
+
+msgid "Slot time"
+msgstr ""
+
+msgid "Software"
+msgstr "소프트웨어"
+
+msgid "Software VLAN"
+msgstr ""
+
+msgid "Some fields are invalid, cannot save values!"
+msgstr ""
+
+msgid "Sorry, the object you requested was not found."
+msgstr ""
+
+msgid "Sorry, the server encountered an unexpected error."
+msgstr ""
+
+msgid ""
+"Sorry, there is no sysupgrade support present; a new firmware image must be "
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
+msgstr ""
+
+msgid "Sort"
+msgstr "순서"
+
+msgid "Source"
+msgstr ""
+
+msgid "Source routing"
+msgstr ""
+
+msgid "Specifies the button state to handle"
+msgstr ""
+
+msgid "Specifies the directory the device is attached to"
+msgstr ""
+
+msgid "Specifies the listening port of this <em>Dropbear</em> instance"
+msgstr "<em>Dropbear</em> instance 의 listening 포트를 지정합니다"
+
+msgid ""
+"Specifies the maximum amount of failed ARP requests until hosts are presumed "
+"to be dead"
+msgstr ""
+
+msgid ""
+"Specifies the maximum amount of seconds after which hosts are presumed to be "
+"dead"
+msgstr ""
+
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
+msgid "Specify the secret encryption key here."
+msgstr ""
+
+msgid "Start"
+msgstr "시작"
+
+msgid "Start priority"
+msgstr "시작 우선순위"
+
+msgid "Startup"
+msgstr "시작 프로그램"
+
+msgid "Static IPv4 Routes"
+msgstr "Static IPv4 Route 경로"
+
+msgid "Static IPv6 Routes"
+msgstr "Static IPv6 Route 경로"
+
+msgid "Static Leases"
+msgstr "Static Lease 들"
+
+msgid "Static Routes"
+msgstr "Static Route 경로"
+
+msgid "Static address"
+msgstr ""
+
+msgid ""
+"Static leases are used to assign fixed IP addresses and symbolic hostnames "
+"to DHCP clients. They are also required for non-dynamic interface "
+"configurations where only hosts with a corresponding lease are served."
+msgstr ""
+"Static Lease 는 DHCP client 에게 고정된 IP 주소와 symbolic hostname 을 할당"
+"할 때 사용됩니다. 이 기능은 또한 지정된 host 에 대해서만 주소 임대를 하도록 "
+"하는 non-dynamic 인터페이스 설정에도 사용됩니다."
+
+msgid "Status"
+msgstr "상태"
+
+msgid "Stop"
+msgstr "정지"
+
+msgid "Strict order"
+msgstr "Strict order"
+
+msgid "Submit"
+msgstr "제출하기"
+
+msgid "Suppress logging"
+msgstr ""
+
+msgid "Suppress logging of the routine operation of these protocols"
+msgstr ""
+
+msgid "Swap"
+msgstr ""
+
+msgid "Swap Entry"
+msgstr ""
+
+msgid "Switch"
+msgstr "스위치"
+
+msgid "Switch %q"
+msgstr "스위치 %q"
+
+msgid "Switch %q (%s)"
+msgstr "스위치 %q (%s)"
+
+msgid ""
+"Switch %q has an unknown topology - the VLAN settings might not be accurate."
+msgstr ""
+
+msgid "Switch VLAN"
+msgstr "스위치 VLAN"
+
+msgid "Switch protocol"
+msgstr "프로토콜 변경"
+
+msgid "Sync with browser"
+msgstr "브라우저 시간대로 동기화"
+
+msgid "Synchronizing..."
+msgstr ""
+
+msgid "System"
+msgstr "시스템"
+
+msgid "System Log"
+msgstr "시스템 로그"
+
+msgid "System Properties"
+msgstr "시스템 등록 정보"
+
+msgid "System log buffer size"
+msgstr "System log 버퍼 크기"
+
+msgid "TCP:"
+msgstr ""
+
+msgid "TFTP Settings"
+msgstr "TFTP 설정"
+
+msgid "TFTP server root"
+msgstr "TFTP 서버 root"
+
+msgid "TX"
+msgstr "TX"
+
+msgid "TX Rate"
+msgstr ""
+
+msgid "Table"
+msgstr ""
+
+msgid "Target"
+msgstr ""
+
+msgid "Target network"
+msgstr ""
+
+msgid "Terminate"
+msgstr ""
+
+msgid ""
+"The <em>Device Configuration</em> section covers physical settings of the "
+"radio hardware such as channel, transmit power or antenna selection which "
+"are shared among all defined wireless networks (if the radio hardware is "
+"multi-SSID capable). Per network settings like encryption or operation mode "
+"are grouped in the <em>Interface Configuration</em>."
+msgstr ""
+"<em>장치 설정<em> 섹션은 channel, transmit power 혹은 antenna 선택과 같은 물"
+"리적인 설정 내용을 다룹니다. 이 설정은 (만약 radio 하드웨어가 multi-SSID 지"
+"원이 가능하다면) 정의된 모든 무선 네트워크에 공통적으로 적용됩니다. 암호화 혹"
+"은 operation mode 와 같은 각 네트워크 설정들은 <em>인터페이스 설정</em>에서 "
+"다루어집니다."
+
+msgid ""
+"The <em>libiwinfo-lua</em> package is not installed. You must install this "
+"component for working wireless configuration!"
+msgstr ""
+
+msgid ""
+"The HE.net endpoint update configuration changed, you must now use the plain "
+"username instead of the user ID!"
+msgstr ""
+
+msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
+"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
+msgstr ""
+
+msgid ""
+"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
+"code> and <code>_</code>"
+msgstr ""
+
+msgid "The configuration file could not be loaded due to the following error:"
+msgstr ""
+
+msgid ""
+"The device file of the memory or partition (<abbr title=\"for example\">e.g."
+"</abbr> <code>/dev/sda1</code>)"
+msgstr ""
+
+msgid ""
+"The filesystem that was used to format the memory (<abbr title=\"for example"
+"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
+"samp>)"
+msgstr ""
+
+msgid ""
+"The flash image was uploaded. Below is the checksum and file size listed, "
+"compare them with the original file to ensure data integrity.<br /> Click "
+"\"Proceed\" below to start the flash procedure."
+msgstr ""
+
+msgid "The following changes have been committed"
+msgstr ""
+
+msgid "The following changes have been reverted"
+msgstr "다음의 변경 사항들이 취소되었습니다"
+
+msgid "The following rules are currently active on this system."
+msgstr "다음의 rule 들이 현재 이 시스템에 적용 중입니다."
+
+msgid "The given network name is not unique"
+msgstr ""
+
+msgid ""
+"The hardware is not multi-SSID capable and the existing configuration will "
+"be replaced if you proceed."
+msgstr ""
+
+msgid ""
+"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
+"addresses."
+msgstr ""
+
+msgid "The length of the IPv6 prefix in bits"
+msgstr ""
+
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
+msgid ""
+"The network ports on this device can be combined to several <abbr title="
+"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
+"communicate directly with each other. <abbr title=\"Virtual Local Area "
+"Network\">VLAN</abbr>s are often used to separate different network "
+"segments. Often there is by default one Uplink port for a connection to the "
+"next greater network like the internet and other ports for a local network."
+msgstr ""
+"이 장치의 네트워크 포트들은 컴퓨터끼리 직접 통신을 할 수 있도록 여러 <abbr "
+"title=\"Virtual Local Area Network\">VLAN</abbr> 으로 구성될 수 있습니다. "
+"<abbr title=\"Virtual Local Area Network\">VLAN</abbr>은 종종 다른 네트워크 "
+"segment 들을 분리하는데 사용되기도 합니다. 한 개의 uplink 포트가 인터넷에 연"
+"결되어 있고 나머지 포트들은 local 네트워크로 연결되는 구성에 자주 사용됩니다."
+
+msgid "The selected protocol needs a device assigned"
+msgstr ""
+
+msgid "The submitted security token is invalid or already expired!"
+msgstr ""
+
+msgid ""
+"The system is erasing the configuration partition now and will reboot itself "
+"when finished."
+msgstr ""
+
+msgid ""
+"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
+"few minutes before you try to reconnect. It might be necessary to renew the "
+"address of your computer to reach the device again, depending on your "
+"settings."
+msgstr ""
+
+msgid ""
+"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
+"AYIYA"
+msgstr ""
+
+msgid ""
+"The uploaded image file does not contain a supported format. Make sure that "
+"you choose the generic image format for your platform."
+msgstr ""
+
+msgid "There are no active leases."
+msgstr ""
+
+msgid "There are no pending changes to apply!"
+msgstr ""
+
+msgid "There are no pending changes to revert!"
+msgstr ""
+
+msgid "There are no pending changes!"
+msgstr ""
+
+msgid ""
+"There is no device assigned yet, please attach a network device in the "
+"\"Physical Settings\" tab"
+msgstr ""
+
+msgid ""
+"There is no password set on this router. Please configure a root password to "
+"protect the web interface and enable SSH."
+msgstr ""
+"이 공유기에 암호 설정이 되지 않았습니다. 웹 UI 와 SSH 부분을 보호하기 위해서 "
+"꼭 root 암호를 설정해 주세요."
+
+msgid "This IPv4 address of the relay"
+msgstr ""
+
+msgid ""
+"This file may contain lines like 'server=/domain/1.2.3.4' or "
+"'server=1.2.3.4' fordomain-specific or full upstream <abbr title=\"Domain "
+"Name System\">DNS</abbr> servers."
+msgstr ""
+
+msgid ""
+"This is a list of shell glob patterns for matching files and directories to "
+"include during sysupgrade. Modified files in /etc/config/ and certain other "
+"configurations are automatically preserved."
+msgstr ""
+"이것은 sysupgrade 시 유지되어야 하는 파일과 디렉토리 목록에 대한 shell glob "
+"패턴들입니다. /etc/config/ 하위의 수정된 파일이나 특정 다른 설정들은 자동적"
+"으로 변경 사항이 보존됩니다."
+
+msgid ""
+"This is either the \"Update Key\" configured for the tunnel or the account "
+"password if no update key has been configured"
+msgstr ""
+
+msgid ""
+"This is the content of /etc/rc.local. Insert your own commands here (in "
+"front of 'exit 0') to execute them at the end of the boot process."
+msgstr ""
+"이것은 /etc/rc.local 파일의 내용입니다. 여기에 ('exit 0' 앞에) 부팅 절차가 "
+"끝날 때 실행하고자 하는 명령들을 삽입하세요."
+
+msgid ""
+"This is the local endpoint address assigned by the tunnel broker, it usually "
+"ends with <code>:2</code>"
+msgstr ""
+
+msgid ""
+"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
+"abbr> in the local network"
+msgstr ""
+
+msgid "This is the plain username for logging into the account"
+msgstr ""
+
+msgid ""
+"This is the prefix routed to you by the tunnel broker for use by clients"
+msgstr ""
+
+msgid "This is the system crontab in which scheduled tasks can be defined."
+msgstr "아래는 예정된 작업들이 정의된 시스템 crontab 내용입니다."
+
+msgid ""
+"This is usually the address of the nearest PoP operated by the tunnel broker"
+msgstr ""
+
+msgid ""
+"This list gives an overview over currently running system processes and "
+"their status."
+msgstr ""
+"이 목록은 현재 실행중인 시스템 프로세스와 해당 상태에 대한 개요를 보여줍니다."
+
+msgid "This page allows the configuration of custom button actions"
+msgstr ""
+
+msgid "This page gives an overview over currently active network connections."
+msgstr "이 페이지는 현재 active 상태인 네트워크 연결을 보여줍니다."
+
+msgid "This section contains no values yet"
+msgstr "이 section 은 아직 입력된 값이 없습니다"
+
+msgid "Time Synchronization"
+msgstr "시간 동기화"
+
+msgid "Time Synchronization is not configured yet."
+msgstr "시간 동기화가 아직 설정되지 않았습니다."
+
+msgid "Timezone"
+msgstr "시간대"
+
+msgid ""
+"To restore configuration files, you can upload a previously generated backup "
+"archive here."
+msgstr ""
+"설정 파일을 복구하고자 한다면 이전에 백업하신 아카이브 파일을 여기로 업로드"
+"할 수 있습니다."
+
+msgid "Tone"
+msgstr ""
+
+msgid "Total Available"
+msgstr "총 이용 가능한 양"
+
+msgid "Traceroute"
+msgstr ""
+
+msgid "Traffic"
+msgstr "트래픽"
+
+msgid "Transfer"
+msgstr "전송량"
+
+msgid "Transmission Rate"
+msgstr ""
+
+msgid "Transmit"
+msgstr ""
+
+msgid "Transmit Power"
+msgstr ""
+
+msgid "Transmitter Antenna"
+msgstr ""
+
+msgid "Trigger"
+msgstr ""
+
+msgid "Trigger Mode"
+msgstr ""
+
+msgid "Tunnel ID"
+msgstr ""
+
+msgid "Tunnel Interface"
+msgstr ""
+
+msgid "Tunnel Link"
+msgstr ""
+
+msgid "Tunnel broker protocol"
+msgstr ""
+
+msgid "Tunnel setup server"
+msgstr ""
+
+msgid "Tunnel type"
+msgstr ""
+
+msgid "Tx-Power"
+msgstr ""
+
+msgid "Type"
+msgstr "유형"
+
+msgid "UDP:"
+msgstr ""
+
+msgid "UMTS only"
+msgstr ""
+
+msgid "UMTS/GPRS/EV-DO"
+msgstr ""
+
+msgid "USB Device"
+msgstr ""
+
+msgid "USB Ports"
+msgstr ""
+
+msgid "UUID"
+msgstr ""
+
+msgid "Unable to dispatch"
+msgstr ""
+
+msgid "Unavailable Seconds (UAS)"
+msgstr ""
+
+msgid "Unknown"
+msgstr "알수없음"
+
+msgid "Unknown Error, password not changed!"
+msgstr ""
+
+msgid "Unmanaged"
+msgstr ""
+
+msgid "Unmount"
+msgstr ""
+
+msgid "Unsaved Changes"
+msgstr "적용 안된 변경 사항"
+
+msgid "Unsupported protocol type."
+msgstr ""
+
+msgid "Update lists"
+msgstr ""
+
+msgid ""
+"Upload a sysupgrade-compatible image here to replace the running firmware. "
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
+msgstr ""
+"실행중인 firmware 변경을 하고자 한다면 여기에 sysupgrade 호환성이 유지되는 이"
+"미지를 업로드하세요. 현재의 설정을 유지하고자 한다면 \"설정 유지\" 를 체크하"
+"세요. (이를 지원하는 firmware 이미지 필요)"
+
+msgid "Upload archive..."
+msgstr "아카이브 업로드..."
+
+msgid "Uploaded File"
+msgstr "Uploaded File"
+
+msgid "Uptime"
+msgstr "가동 시간"
+
+msgid "Use <code>/etc/ethers</code>"
+msgstr "<code>/etc/ethers</code> 사용"
+
+msgid "Use DHCP gateway"
+msgstr ""
+
+msgid "Use DNS servers advertised by peer"
+msgstr "Peer 가 권장한 DNS 서버 사용"
+
+msgid "Use ISO/IEC 3166 alpha2 country codes."
+msgstr ""
+
+msgid "Use MTU on tunnel interface"
+msgstr ""
+
+msgid "Use TTL on tunnel interface"
+msgstr ""
+
+msgid "Use as external overlay (/overlay)"
+msgstr ""
+
+msgid "Use as root filesystem (/)"
+msgstr ""
+
+msgid "Use broadcast flag"
+msgstr "Broadcast flag 사용"
+
+msgid "Use builtin IPv6-management"
+msgstr "자체 내장 IPv6-관리 기능 사용"
+
+msgid "Use custom DNS servers"
+msgstr "임의의 DNS 서버 사용"
+
+msgid "Use default gateway"
+msgstr "Default gateway 사용"
+
+msgid "Use gateway metric"
+msgstr "Gateway metric 사용"
+
+msgid "Use routing table"
+msgstr "Routing table 사용"
+
+msgid ""
+"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
+"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
+"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
+"requesting host. The optional <em>Lease time</em> can be used to set non-"
+"standard host-specific lease time, e.g. 12h, 3d or infinite."
+msgstr ""
+"새로운 항목을 추가하기 위해서는 <em>추가</em> 버튼을 사용하세요. <em>MAC-주소"
+"</em>는 host 를 나타내며, <em>IPv4-주소</em>는 사용할 고정 주소를 나타내고, "
+"요청하는 host 에 대해 <em>hostname</em> 이 symbolic name 으로 부여됩니다. 선"
+"택 사항인 <em>임대 시간</em>은 해당 host 에만 해당되는 시각을 설정하는데 사용"
+"될 수 있습니다. 예를 들어 12h, 3d 혹은 infinite 값들이 가능합니다."
+
+msgid "Used"
+msgstr ""
+
+msgid "Used Key Slot"
+msgstr ""
+
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
+msgid "User certificate (PEM encoded)"
+msgstr ""
+
+msgid "User key (PEM encoded)"
+msgstr ""
+
+msgid "Username"
+msgstr "사용자이름"
+
+msgid "VC-Mux"
+msgstr ""
+
+msgid "VDSL"
+msgstr ""
+
+msgid "VLANs on %q"
+msgstr ""
+
+msgid "VLANs on %q (%s)"
+msgstr "VLAN 설정: %q (%s)"
+
+msgid "VPN Local address"
+msgstr ""
+
+msgid "VPN Local port"
+msgstr ""
+
+msgid "VPN Server"
+msgstr ""
+
+msgid "VPN Server port"
+msgstr ""
+
+msgid "VPN Server's certificate SHA1 hash"
+msgstr ""
+
+msgid "VPNC (CISCO 3000 (and others) VPN)"
+msgstr ""
+
+msgid "Vendor"
+msgstr ""
+
+msgid "Vendor Class to send when requesting DHCP"
+msgstr "DHCP 요청시 전송할 Vendor Class"
+
+msgid "Verbose"
+msgstr ""
+
+msgid "Verbose logging by aiccu daemon"
+msgstr ""
+
+msgid "Verify"
+msgstr ""
+
+msgid "Version"
+msgstr "버전"
+
+msgid "WDS"
+msgstr "WDS"
+
+msgid "WEP Open System"
+msgstr ""
+
+msgid "WEP Shared Key"
+msgstr ""
+
+msgid "WEP passphrase"
+msgstr ""
+
+msgid "WMM Mode"
+msgstr "WMM Mode"
+
+msgid "WPA passphrase"
+msgstr ""
+
+msgid ""
+"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
+"and ad-hoc mode) to be installed."
+msgstr ""
+
+msgid ""
+"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
+msgstr ""
+
+msgid "Waiting for changes to be applied..."
+msgstr "변경 사항이 적용되기를 기다리는 중입니다..."
+
+msgid "Waiting for command to complete..."
+msgstr "실행한 명령이 끝나기를 기다리는 중입니다..."
+
+msgid "Waiting for device..."
+msgstr ""
+
+msgid "Warning"
+msgstr ""
+
+msgid "Warning: There are unsaved changes that will get lost on reboot!"
+msgstr ""
+
+msgid "Whether to create an IPv6 default route over the tunnel"
+msgstr ""
+
+msgid "Whether to route only packets from delegated prefixes"
+msgstr ""
+
+msgid "Width"
+msgstr ""
+
+msgid "WireGuard VPN"
+msgstr ""
+
+msgid "Wireless"
+msgstr "무선"
+
+msgid "Wireless Adapter"
+msgstr ""
+
+msgid "Wireless Network"
+msgstr "무선랜 네트워크"
+
+msgid "Wireless Overview"
+msgstr "무선랜 개요"
+
+msgid "Wireless Security"
+msgstr "무선랜 보안"
+
+msgid "Wireless is disabled or not associated"
+msgstr "무선이 비활성화되어 있거나 연결되어 있지 않습니다"
+
+msgid "Wireless is restarting..."
+msgstr "무선랜이 재시작중입니다..."
+
+msgid "Wireless network is disabled"
+msgstr "무선 네트워크가 꺼져 있음"
+
+msgid "Wireless network is enabled"
+msgstr "무선 네트워크가 켜져 있음"
+
+msgid "Wireless restarted"
+msgstr "무선랜이 재시작되었습니다"
+
+msgid "Wireless shut down"
+msgstr "무선랜이 shutdown 되었습니다"
+
+msgid "Write received DNS requests to syslog"
+msgstr "받은 DNS 요청 내용을 systlog 에 기록합니다"
+
+msgid "Write system log to file"
+msgstr "System log 출력 파일 경로"
+
+msgid ""
+"You can enable or disable installed init scripts here. Changes will applied "
+"after a device reboot.<br /><strong>Warning: If you disable essential init "
+"scripts like \"network\", your device might become inaccessible!</strong>"
+msgstr ""
+"이 메뉴에서 설치된 init script 를 활성화/비활성화 할 수 있습니다. 변경 사항"
+"은 장치가 재부팅 될 때 적용되게 됩니다.<br /><strong>경고: 만약 \"network\" "
+"와 같은 중요 init script 를 비활성화 할 경우, 장치에 접속을 못하실 수 있습니"
+"다!</strong>"
+
+msgid ""
+"You must enable JavaScript in your browser or LuCI will not work properly."
+msgstr ""
+
+msgid ""
+"Your Internet Explorer is too old to display this page correctly. Please "
+"upgrade it to at least version 7 or use another browser like Firefox, Opera "
+"or Safari."
+msgstr ""
+
+msgid "any"
+msgstr ""
+
+msgid "auto"
+msgstr ""
+
+msgid "automatic"
+msgstr ""
+
+msgid "baseT"
+msgstr ""
+
+msgid "bridged"
+msgstr ""
+
+msgid "create:"
+msgstr ""
+
+msgid "creates a bridge over specified interface(s)"
+msgstr "지정한 인터페이스(들)로 구성된 bridge 를 생성합니다"
+
+msgid "dB"
+msgstr ""
+
+msgid "dBm"
+msgstr ""
+
+msgid "disable"
+msgstr ""
+
+msgid "disabled"
+msgstr ""
+
+msgid "expired"
+msgstr "만료됨"
+
+msgid ""
+"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
+"abbr>-leases will be stored"
+msgstr ""
+"할당된 <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>-lease "
+"정보가 저장되는 파일"
+
+msgid "forward"
+msgstr ""
+
+msgid "full-duplex"
+msgstr ""
+
+msgid "half-duplex"
+msgstr ""
+
+msgid "help"
+msgstr ""
+
+msgid "hidden"
+msgstr ""
+
+msgid "hybrid mode"
+msgstr ""
+
+msgid "if target is a network"
+msgstr "Target 이 네트워크일 경우"
+
+msgid "input"
+msgstr ""
+
+msgid "kB"
+msgstr ""
+
+msgid "kB/s"
+msgstr ""
+
+msgid "kbit/s"
+msgstr ""
+
+msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
+msgstr "local <abbr title=\"Domain Name System\">DNS</abbr> 파일"
+
+msgid "minimum 1280, maximum 1480"
+msgstr ""
+
+msgid "minutes"
+msgstr ""
+
+msgid "navigation Navigation"
+msgstr ""
+
+msgid "no"
+msgstr ""
+
+msgid "no link"
+msgstr "link 없음"
+
+msgid "none"
+msgstr ""
+
+msgid "not present"
+msgstr ""
+
+msgid "off"
+msgstr ""
+
+msgid "on"
+msgstr ""
+
+msgid "open"
+msgstr ""
+
+msgid "overlay"
+msgstr ""
+
+msgid "relay mode"
+msgstr ""
+
+msgid "routed"
+msgstr ""
+
+msgid "server mode"
+msgstr ""
+
+msgid "skiplink1 Skip to navigation"
+msgstr ""
+
+msgid "skiplink2 Skip to content"
+msgstr ""
+
+msgid "stateful-only"
+msgstr ""
+
+msgid "stateless"
+msgstr ""
+
+msgid "stateless + stateful"
+msgstr ""
+
+msgid "tagged"
+msgstr ""
+
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
+msgid "unknown"
+msgstr ""
+
+msgid "unlimited"
+msgstr ""
+
+msgid "unspecified"
+msgstr ""
+
+msgid "unspecified -or- create:"
+msgstr "unspecified -혹은- create:"
+
+msgid "untagged"
+msgstr ""
+
+msgid "yes"
+msgstr ""
+
+msgid "« Back"
+msgstr ""
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr ""
msgid "15 Minute Load:"
msgstr ""
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr ""
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "APN"
msgstr ""
-msgid "AR Support"
-msgstr "AR-Penyokong"
-
msgid "ARP retry threshold"
msgstr ""
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr ""
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Associated Stesen"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Authentifizierung"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Pengesahan"
msgid "Back to scan results"
msgstr "Kembali ke keputusan scan"
-msgid "Background Scan"
-msgstr "Latar Belakang Scan"
-
msgid "Backup / Flash Firmware"
msgstr ""
"defined backup patterns."
msgstr ""
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr ""
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Jumlah disemak "
msgid "Common Configuration"
msgstr ""
-msgid "Compression"
-msgstr "Mampatan"
-
msgid "Configuration"
msgstr "Konfigurasi"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Mematikan pemasa HW-Beacon"
-
msgid "Disabled"
msgstr ""
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr ""
msgid "Do not forward reverse lookups for local networks"
msgstr ""
-msgid "Do not send probe responses"
-msgstr "Jangan menghantar jawapan penyelidikan"
-
msgid "Domain required"
msgstr "Domain diperlukan"
msgid "Domain whitelist"
msgstr ""
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr ""
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr ""
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr ""
msgid "Enabled"
msgstr ""
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "Aktifkan spanning Tree Protokol di jambatan ini"
msgid "Encryption"
msgstr "Enkripsi"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr ""
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr ""
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Frame Cepat"
-
msgid "File"
msgstr ""
msgid "Firewall"
msgstr "Firewall"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Tetapan Firewall"
msgid "Free space"
msgstr ""
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr ""
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "Kawalan"
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "Alamat IP"
msgid "IPv4-Address"
msgstr ""
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "Konfigurasi IPv6"
msgid "IPv6-Address"
msgstr ""
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr ""
"Tampak bahawa anda cuba untuk flash fail gambar yang tidak sesuai dengan "
"memori flash, sila buat pengesahan pada fail gambar!"
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr ""
#, fuzzy
"requests to"
msgstr ""
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Rate Maksimum"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr ""
msgid "Metric"
msgstr "Metrik"
-msgid "Minimum Rate"
-msgstr "Rate Minimum"
-
#, fuzzy
msgid "Minimum hold time"
msgstr "Memegang masa minimum"
msgid "Missing protocol extension for proto %q"
msgstr ""
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Mode"
msgid "Move up"
msgstr ""
-msgid "Multicast Rate"
-msgstr "Multicast Rate"
-
msgid "Multicast address"
msgstr ""
msgid "Option removed"
msgstr ""
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Pilihan"
msgid "Outbound:"
msgstr ""
-msgid "Outdoor Channels"
-msgstr "Saluran Outdoor"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr ""
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr ""
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr ""
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr ""
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr ""
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr ""
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Teruskan"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Pseudo Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr ""
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr ""
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr ""
msgid "Receiver Antenna"
msgstr "Antena Penerima"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr ""
msgid "References"
msgstr "Rujukan"
-msgid "Regulatory Domain"
-msgstr "Peraturan Domain"
-
msgid "Relay"
msgstr ""
msgid "Remote IPv4 address"
msgstr ""
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Menghapuskan"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Pisahkan Pelanggan"
-msgid "Separate WDS"
-msgstr "Pisahkan WDS"
-
msgid "Server Settings"
msgstr ""
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
msgid "Sort"
"dead"
msgstr ""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr ""
msgid "Static Routes"
msgstr "Laluan Statik"
-msgid "Static WDS"
-msgstr ""
-
msgid "Static address"
msgstr ""
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
msgid "The length of the IPv6 prefix in bits"
msgstr ""
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Mod Turbo"
-
msgid "Tx-Power"
msgstr ""
msgid "USB Device"
msgstr ""
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr ""
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
msgid "Upload archive..."
msgid "Used Key Slot"
msgstr ""
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr ""
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "Sokongan XR"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
msgstr ""
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr ""
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr ""
msgid "« Back"
msgstr "« Kembali"
+
+#~ msgid "AR Support"
+#~ msgstr "AR-Penyokong"
+
+#~ msgid "Background Scan"
+#~ msgstr "Latar Belakang Scan"
+
+#~ msgid "Compression"
+#~ msgstr "Mampatan"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Mematikan pemasa HW-Beacon"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Jangan menghantar jawapan penyelidikan"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Frame Cepat"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Rate Maksimum"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Rate Minimum"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Multicast Rate"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Saluran Outdoor"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Peraturan Domain"
+
+#~ msgid "Separate WDS"
+#~ msgstr "Pisahkan WDS"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Mod Turbo"
+
+#~ msgid "XR Support"
+#~ msgstr "Sokongan XR"
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "1 minutts belastning:"
msgid "15 Minute Load:"
msgstr "15 minutters belastning:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "5 minutters belastning:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "APN"
msgstr "<abbr title=\"Aksesspunkt Navn\">APN</abbr>"
-msgid "AR Support"
-msgstr "AR Støtte"
-
msgid "ARP retry threshold"
msgstr "APR terskel for nytt forsøk"
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr "Tillat oppstrøms svar i 127.0.0.0/8 nettet, f.eks for RBL tjenester"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Tilkoblede Klienter"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Atheros 802.11%s Trådløs Kontroller"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Godkjenning"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Autoritativ"
msgid "Back to scan results"
msgstr "Tilbake til skanne resultat"
-msgid "Background Scan"
-msgstr "Bakgrunns Skanning"
-
msgid "Backup / Flash Firmware"
msgstr "Sikkerhetskopiering/Firmware oppgradering"
"konfigurasjonsfiler som er merket av opkg, essensielle enhets filer og andre "
"filer valgt av bruker."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Bitrate"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Kontrollsum"
msgid "Common Configuration"
msgstr "Vanlige Innstillinger"
-msgid "Compression"
-msgstr "Komprimering"
-
msgid "Configuration"
msgstr "Konfigurasjon"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Deaktiver HW-Beacon timer"
-
msgid "Disabled"
msgstr "Deaktivert"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "Forkast oppstrøms RFC1918 svar"
msgid "Do not forward reverse lookups for local networks"
msgstr "Ikke videresend reverserte oppslag for lokale nettverk"
-msgid "Do not send probe responses"
-msgstr "Ikke send probe svar"
-
msgid "Domain required"
msgstr "Domene kreves"
msgid "Domain whitelist"
msgstr "Domene hviteliste"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr "Aktiver HE,net dynamisk endepunkt oppdatering"
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "Aktiver IPv6 på PPP lenke"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "Aktiver dette monteringspunktet"
msgid "Enabled"
msgstr "Aktivert"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "Aktiverer Spanning Tree Protocol på denne broen"
msgid "Encryption"
msgstr "Kryptering"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "Sletter..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr "Ekstern systemlogg server"
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Fast Frames"
-
msgid "File"
msgstr "Fil"
msgid "Firewall"
msgstr "Brannmur"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Brannmur Innstillinger"
msgid "Free space"
msgstr "Ledig plass"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "GHz"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "Behandler"
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "IP adresse"
msgid "IPv4-Address"
msgstr "IPv4-Adresse"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr "IPv6-Adresse"
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6-i-IPv4 (RFC4213)"
"Det virker som du prøver å flashe med en firmware som ikke passer inn i "
"flash-minnet, vennligst kontroller firmware filen!"
-msgid "Java Script required!"
-msgstr "Java Script kreves!"
+msgid "JavaScript required!"
+msgstr "JavaScript kreves!"
msgid "Join Network"
msgstr "Koble til nettverket"
"Liste med <abbr title=\"Domain Name System\">DNS</abbr> servere som "
"forespørsler blir videresendt til"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
"Lytt kun på det angitte grensesnitt, om ingen er angitt lyttes det på alle"
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Maksimal hastighet"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr "Maksimalt antall aktive DHCP leieavtaler"
msgid "Metric"
msgstr "Metrisk"
-msgid "Minimum Rate"
-msgstr "Minimum hastighet"
-
msgid "Minimum hold time"
msgstr "Minimum holde tid"
msgid "Missing protocol extension for proto %q"
msgstr "Mangler protokoll utvidelse for proto %q"
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Modus"
msgid "Move up"
msgstr "Flytt opp"
-msgid "Multicast Rate"
-msgstr "Multicast hastighet"
-
msgid "Multicast address"
msgstr "Multicast adresse"
msgid "Option removed"
msgstr "Innstilling fjernet"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Alternativer"
msgid "Outbound:"
msgstr "Ugående:"
-msgid "Outdoor Channels"
-msgstr "Utendørs Kanaler"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr "Overstyr MTU"
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr "PIN"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP"
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "Foreta nullstilling"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr "Phy Hastighet:"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Prism2/2.5/3 802.11b Trådløs Kontroller"
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Fortsett"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Pseudo Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr "Kvalitet"
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr "Trådløst i sanntid"
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr "Binde beskyttelse"
msgid "Receiver Antenna"
msgstr "Mottak antenne"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "Koble til igjen"
msgid "References"
msgstr "Referanser"
-msgid "Regulatory Domain"
-msgstr "Regulerende Domene"
-
msgid "Relay"
msgstr "Relay"
msgid "Remote IPv4 address"
msgstr "Ekstern IPv4 adresse"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Avinstaller"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "Er nødvendig for noen nettleverandører, f.eks Charter med DOCSIS 3"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Separerte Klienter"
-msgid "Separate WDS"
-msgstr "Separert WDS"
-
msgid "Server Settings"
msgstr "Server Innstillinger"
msgid "Sorry, the server encountered an unexpected error."
msgstr "Beklager, det oppstod en uventet feil på serveren."
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
"Beklager, men finner ikke støtte for 'sysupgrade', ny firmware må derfor "
-"flashes manuelt. Viser til OpenWrt wiki for installering av firmare på "
-"forskjellige enheter."
+"flashes manuelt. Viser til wiki for installering av firmare på forskjellige "
+"enheter."
msgid "Sort"
msgstr "Sortering"
"dead"
msgstr "Angir maksimalt antall sekunder før verter ansees som frakoblet"
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "Angi krypteringsnøkkelen her."
msgid "Static Routes"
msgstr "Statiske Ruter"
-msgid "Static WDS"
-msgstr "Statisk WDS"
-
msgid "Static address"
msgstr "Statisk adresse"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
"IPv6 prefikset tilordnet mot leverandør, ender som regel med <code>::</code>"
msgid "The length of the IPv6 prefix in bits"
msgstr "Lengden på IPv6 prefikset i bits"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Turbo Modus"
-
msgid "Tx-Power"
msgstr "Tx-Styrke"
msgid "USB Device"
msgstr "USB Enhet"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "UUID"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
"Last her opp en sysupgrade-kompatibel firmware som skal erstatte den "
"kjørende firmware. Merk av \"Behold innstillinger\" for å beholde gjeldene "
-"konfigurasjon. (en OpenWrt kompatibel firmware er nødvendig)"
+"konfigurasjon. (en kompatibel firmware er nødvendig)"
msgid "Upload archive..."
msgstr "Last opp arkiv..."
msgid "Used Key Slot"
msgstr "Brukte Nøkler"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "Trådløs"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "XR Støtte"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"utilgjengelig! </strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
-"Du må aktivere Java Script i nettleseren din ellers vil ikke LuCI fungere "
+"Du må aktivere JavaScript i nettleseren din ellers vil ikke LuCI fungere "
"skikkelig."
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "tagget"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "ukjent"
msgid "« Back"
msgstr "« Tilbake"
+#~ msgid "AR Support"
+#~ msgstr "AR Støtte"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Atheros 802.11%s Trådløs Kontroller"
+
+#~ msgid "Background Scan"
+#~ msgstr "Bakgrunns Skanning"
+
+#~ msgid "Compression"
+#~ msgstr "Komprimering"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Deaktiver HW-Beacon timer"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Ikke send probe svar"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Fast Frames"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Maksimal hastighet"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Minimum hastighet"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Multicast hastighet"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Utendørs Kanaler"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Regulerende Domene"
+
+#~ msgid "Separate WDS"
+#~ msgstr "Separert WDS"
+
+#~ msgid "Static WDS"
+#~ msgstr "Statisk WDS"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Turbo Modus"
+
+#~ msgid "XR Support"
+#~ msgstr "XR Støtte"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "Et nytt nettverk vil bli opprettet hvis du tar bort haken."
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Obciążenie 1 min.:"
msgid "15 Minute Load:"
msgstr "Obciążenie 15 min.:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "Obciążenie 5 min.:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "APN"
msgstr "APN"
-# Wydaje mi się że brakuje litery R...
-msgid "AR Support"
-msgstr "Wsparcie dla ARP"
-
msgid "ARP retry threshold"
msgstr "Próg powtórzeń ARP"
msgstr ""
"Pozwól na ruch wychodzący (odpowiedzi) z podsieci 127.0.0.0/8, np. usługi RBL"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Połączone stacje"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Bezprzewodowy kontroler Atheros 802.11%s"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Uwierzytelnianie"
+msgid "Authentication Type"
+msgstr ""
+
# Nawet M$ tego nie tłumaczy;)
msgid "Authoritative"
msgstr "Autorytatywny"
msgid "Back to scan results"
msgstr "Wróć do wyników skanowania"
-msgid "Background Scan"
-msgstr "Skanowanie w tle"
-
msgid "Backup / Flash Firmware"
msgstr "Kopia zapasowa/aktualizacja firmware"
"Zawiera ona zmienione pliki konfiguracyjne oznaczone przez opkg, podstawowe "
"pliki systemowe, oraz pliki oznaczone do kopiowania przez użytkownika."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Przepływność"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Suma kontrolna"
msgid "Common Configuration"
msgstr "Konfiguracja podstawowa"
-msgid "Compression"
-msgstr "Kompresja"
-
msgid "Configuration"
msgstr "Konfiguracja"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Wyłącz zegar HW-Beacon"
-
msgid "Disabled"
msgstr "Wyłączony"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "Odrzuć wychodzące odpowiedzi RFC1918"
msgid "Do not forward reverse lookups for local networks"
msgstr "Nie przekazuj odwrotnych lookup`ów do sieci lokalnych"
-msgid "Do not send probe responses"
-msgstr "Nie wysyłaj ramek probe response"
-
msgid "Domain required"
msgstr "Wymagana domena"
msgid "Domain whitelist"
msgstr "Whitelist domen (Dozwolone domeny)"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr "Włącz dynamiczną aktualizację punktu końcowego sieci HE.net"
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "Włącz negocjację IPv6 na łączu PPP"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "Włącz ten punkt montowania"
msgid "Enabled"
msgstr "Włączony"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr ""
"Włącz protokół <abbr title=\"Spanning Tree Protocol\">STP</abbr> na tym "
msgid "Encryption"
msgstr "Szyfrowanie"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "Usuwanie..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr "Zewnętrzny serwer dla loga systemowego"
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Szybkie ramki (Fast Frames)"
-
msgid "File"
msgstr "Plik"
msgid "Firewall"
msgstr "Firewall"
+msgid "Firewall Mark"
+msgstr ""
+
# Nie ma potrzeby pisania z dużej litery
msgid "Firewall Settings"
msgstr "Ustawienia firewalla"
msgid "Free space"
msgstr "Wolna przestrzeń"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "GHz"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "Uchwyt"
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "Adres IP"
msgid "IPv4-Address"
msgstr "Adres IPv4"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr "Adres IPv6"
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6-w-IPv4 (RFC4213)"
"Wygląda na to, że próbujesz wgrać obraz większy niż twoja pamięć flash, "
"proszę sprawdź czy to właściwy obraz!"
-msgid "Java Script required!"
-msgstr "Java Script jest wymagany!"
+msgid "JavaScript required!"
+msgstr "JavaScript jest wymagany!"
msgid "Join Network"
msgstr "Połącz z siecią"
"Lista serwerów <abbr title=\"Domain Name System\">DNS</abbr> do których będą "
"przekazywane zapytania"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
"Słuchaj tylko na podanym interfejsie, lub jeśli nie podano na wszystkich"
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Maksymalna Szybkość"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr "Maksymalna dozwolona liczba aktywnych dzierżaw DHCP"
msgid "Metric"
msgstr "Metryka"
-msgid "Minimum Rate"
-msgstr "Minimalna Szybkość"
-
msgid "Minimum hold time"
msgstr "Minimalny czas podtrzymania"
msgid "Missing protocol extension for proto %q"
msgstr "Brakujące rozszerzenie protokołu dla protokołu %q"
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Tryb"
msgid "Move up"
msgstr "Przesuń w górę"
-msgid "Multicast Rate"
-msgstr "Szybkość Multicast`u"
-
msgid "Multicast address"
msgstr "Adres Multicast`u"
msgid "Option removed"
msgstr "Usunięto wartość"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Opcje"
msgid "Outbound:"
msgstr "Wychodzący:"
-msgid "Outdoor Channels"
-msgstr "Kanały zewnętrzne"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr "Nadpisz MTU"
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr "PIN"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP"
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "Wykonaj reset"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr "Szybkość Phy:"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Kontroler bezprzewodowy Prism2/2.5/3 802.11b"
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Wykonaj"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Pseudo Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr "Jakość"
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr "WiFi w czasie rzeczywistym"
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr "Przypisz ochronę"
msgid "Receiver Antenna"
msgstr "Antena odbiorcza"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "Połącz ponownie ten interfejs"
msgid "References"
msgstr "Referencje"
-msgid "Regulatory Domain"
-msgstr "Domena regulacji"
-
msgid "Relay"
msgstr "Przekaźnik"
msgid "Remote IPv4 address"
msgstr "Zdalny adres IPv4"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Usuń"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "Wymagany dla niektórych dostawców internetu, np. Charter z DOCSIS 3"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Rozdziel klientów"
-msgid "Separate WDS"
-msgstr "Rozdziel WDS"
-
msgid "Server Settings"
msgstr "Ustawienia serwera"
msgid "Sorry, the server encountered an unexpected error."
msgstr "Przepraszamy, ale serwer napotkał nieoczekiwany błąd."
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
"Przepraszamy, ale nie ma wsparcia dla trybu sysupgrade. Nowy firmware musi "
-"być wgrany ręcznie. Sprawdź stronę OpenWrt wiki, aby uzyskać instrukcję dla "
-"danego urządzenia."
+"być wgrany ręcznie. Sprawdź stronę wiki, aby uzyskać instrukcję dla danego "
+"urządzenia."
msgid "Sort"
msgstr "Posortuj"
msgstr ""
"Określa maksymalny czas w sekundach przed założeniem, że host jest martwy"
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "Określ tajny klucz szyfrowania."
msgid "Static Routes"
msgstr "Statyczne ścieżki routingu"
-msgid "Static WDS"
-msgstr "Statyczny WDS"
-
msgid "Static address"
msgstr "Stały adres"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
"Prefiks IPv6 przypisany do dostawcy, zazwyczaj kończy się <code>::</code>"
msgid "The length of the IPv6 prefix in bits"
msgstr "Długość prefiksu IPv6 w bitach"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Tryb Turbo"
-
msgid "Tx-Power"
msgstr "Moc nadawania"
msgid "USB Device"
msgstr "Urządzenie USB"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "UUID"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
"Prześlij zgodny z funkcją sysupgrade obraz tutaj, aby zastąpić aktualnie "
"działające firmware. Zaznacz opcję \"Zachowaj ustawienia\", aby zachować "
-"bieżącą konfigurację (wymaga zgodnego obrazu firmware OpenWrt)."
+"bieżącą konfigurację (wymaga zgodnego obrazu firmware)."
msgid "Upload archive..."
msgstr "Załaduj archiwum..."
msgid "Used Key Slot"
msgstr "Użyte gniazdo klucza"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "Sieć bezprzewodowa"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "Wsparcie XR"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"się nieosiągalne!</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
-"Musisz włączyć obsługę Java Script w swojej przeglądarce, inaczej LuCI nie "
+"Musisz włączyć obsługę JavaScript w swojej przeglądarce, inaczej LuCI nie "
"będzie działać poprawnie."
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "tagowane"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "nieznane"
msgid "« Back"
msgstr "« Wróć"
+# Wydaje mi się że brakuje litery R...
+#~ msgid "AR Support"
+#~ msgstr "Wsparcie dla ARP"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Bezprzewodowy kontroler Atheros 802.11%s"
+
+#~ msgid "Background Scan"
+#~ msgstr "Skanowanie w tle"
+
+#~ msgid "Compression"
+#~ msgstr "Kompresja"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Wyłącz zegar HW-Beacon"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Nie wysyłaj ramek probe response"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Szybkie ramki (Fast Frames)"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Maksymalna Szybkość"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Minimalna Szybkość"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Szybkość Multicast`u"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Kanały zewnętrzne"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Domena regulacji"
+
+#~ msgid "Separate WDS"
+#~ msgstr "Rozdziel WDS"
+
+#~ msgid "Static WDS"
+#~ msgstr "Statyczny WDS"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Tryb Turbo"
+
+#~ msgid "XR Support"
+#~ msgstr "Wsparcie XR"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr ""
#~ "Zostanie utworzona dodatkowa sieć jeśli zostawisz tą opcję niezaznaczoną."
msgid ""
msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
+"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2014-03-29 23:31+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
+"PO-Revision-Date: 2017-02-22 20:30-0300\n"
+"Last-Translator: Luiz Angelo Daros de Luca <luizluca@gmail.com>\n"
"Language: pt_BR\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
+"X-Generator: Poedit 1.8.11\n"
+"Language-Team: \n"
msgid "%s is untagged in multiple VLANs!"
-msgstr ""
+msgstr "%s está sem etiqueta em múltiplas VLANs!"
msgid "(%d minute window, %d second interval)"
msgstr "(janela de %d minutos, intervalo de %d segundos)"
msgstr "-- personalizado --"
msgid "-- match by device --"
-msgstr ""
+msgstr "-- casar por dispositivo --"
msgid "-- match by label --"
+msgstr "-- casar por rótulo --"
+
+msgid "-- match by uuid --"
msgstr ""
+"-- casar por <abbr title=\"Universal Unique IDentifier/Identificador Único "
+"Universal\">UUID</abbr> --"
msgid "1 Minute Load:"
msgstr "Carga 1 Minuto:"
msgid "15 Minute Load:"
msgstr "Carga 15 Minutos:"
+msgid "4-character hexadecimal ID"
+msgstr "Identificador hexadecimal de 4 caracteres"
+
msgid "464XLAT (CLAT)"
-msgstr ""
+msgstr "464XLAT (CLAT)"
msgid "5 Minute Load:"
msgstr "Carga 5 Minutos:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+"Identificador de 6 octetos como uma cadeia hexadecimal - sem dois pontos"
+
+msgid "802.11r Fast Transition"
+msgstr "802.11r Fast Transition"
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr "Tempo de expiração máximo da consulta da Associação SA do 802.11w"
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+"Tempo de expiração de tentativa de consulta da Associação SA do 802.11w"
+
+msgid "802.11w Management Frame Protection"
+msgstr "Proteção do Quadro de Gerenciamento do 802.11w"
+
+msgid "802.11w maximum timeout"
+msgstr "Estouro de tempo máximo do 802.11w"
+
+msgid "802.11w retry timeout"
+msgstr "Estouro de tempo da nova tentativa do 802.11w"
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr ""
"<abbr title=\"Identificador de Conjunto Básico de Serviços\">BSSID</abbr>"
msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Suffix (hex)"
msgstr ""
+"<abbr title=\"Internet Protocol Version 6/Protocolo Internet Versão "
+"6\">IPv6</abbr>-Suffix (hex)"
msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
msgstr "Configuração do <abbr title=\"Diodo Emissor de Luz\">LED</abbr>"
msgstr "<abbr title='Par: %s / Grupo: %s'>%s - %s</abbr>"
msgid "A43C + J43 + A43"
-msgstr ""
+msgstr "A43C + J43 + A43"
msgid "A43C + J43 + A43 + V43"
-msgstr ""
+msgstr "A43C + J43 + A43 + V43"
msgid "ADSL"
msgstr ""
+"<abbr title=\"Assymetrical Digital Subscriber Line/Linha Digital Assimétrica "
+"para Assinante\">ADSL</abbr>"
msgid "AICCU (SIXXS)"
msgstr ""
+"<abbr title=\"Automatic IPv6 Connectivity Client Utility/Utilitário Cliente "
+"de Conectividade IPv6 Automática\">AICCU (SIXXS)</abbr>"
msgid "ANSI T1.413"
-msgstr ""
+msgstr "ANSI T1.413"
msgid "APN"
msgstr "<abbr title=\"Access Point Name\">APN</abbr>"
-msgid "AR Support"
-msgstr "Suporte AR"
-
msgid "ARP retry threshold"
msgstr ""
"Limite de retentativas do <abbr title=\"Address Resolution Protocol\">ARP</"
"abbr>"
msgid "ATM (Asynchronous Transfer Mode)"
-msgstr ""
+msgstr "ATM (Asynchronous Transfer Mode)"
msgid "ATM Bridges"
msgstr "Ponte ATM"
msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr "Identificador de Canal Virtual ATM (VCI)"
+msgstr ""
+"Identificador de Canal Virtual ATM (<abbr title=\"Virtual Channel Identifier"
+"\">VCI</abbr>)"
msgid "ATM Virtual Path Identifier (VPI)"
-msgstr "Identificador de Caminho Virtual ATM (VPI)"
+msgstr ""
+"Identificador de Caminho Virtual ATM (<abbr title=\"Virtual Path Identifier"
+"\">VPI</abbr>)"
msgid ""
"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
msgstr "Número do dispositivo ATM"
msgid "ATU-C System Vendor ID"
-msgstr ""
+msgstr "Identificador de"
msgid "AYIYA"
-msgstr ""
+msgstr "AYIYA"
msgid "Access Concentrator"
msgstr "Concentrador de Acesso"
msgstr "Arquivos adicionais de equipamentos conhecidos (hosts)"
msgid "Additional servers file"
-msgstr ""
+msgstr "Arquivo de servidores adicionais"
msgid "Address"
msgstr "Endereço"
msgid "Aggregate Transmit Power(ACTATP)"
msgstr ""
+"Potência de Transmissão Agregada (<abbr title=\"Aggregate Transmit Power"
+"\">ACTATP</abbr>)"
msgid "Alert"
msgstr "Alerta"
"Allocate IP addresses sequentially, starting from the lowest available "
"address"
msgstr ""
+"Alocar endereços IP sequencialmente, iniciando a partir do endereço mais "
+"baixo disponível"
msgid "Allocate IP sequentially"
-msgstr ""
+msgstr "Alocar endereços IP sequencialmente"
msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
msgstr ""
"Permite respostas que apontem para 127.0.0.0/8 de servidores externos, por "
"exemplo, para os serviços RBL"
+msgid "Allowed IPs"
+msgstr "Endereços IP autorizados"
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgstr ""
+"Veja também a <a href=\"https://www.sixxs.net/faq/connectivity/?"
+"faq=comparison\">Comparação de Tunelamentos</a> em SIXXS"
msgid "Always announce default router"
-msgstr ""
-
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
+msgstr "Sempre anuncie o roteador padrão"
msgid "Annex"
-msgstr ""
+msgstr "Anexo"
msgid "Annex A + L + M (all)"
-msgstr ""
+msgstr "Anexos A + L + M (todo)"
msgid "Annex A G.992.1"
-msgstr ""
+msgstr "Anexo A G.992.1"
msgid "Annex A G.992.2"
-msgstr ""
+msgstr "Anexo A G.992.2"
msgid "Annex A G.992.3"
-msgstr ""
+msgstr "Anexo A G.992.3"
msgid "Annex A G.992.5"
-msgstr ""
+msgstr "Anexo A G.992.5"
msgid "Annex B (all)"
-msgstr ""
+msgstr "Anexo B (todo)"
msgid "Annex B G.992.1"
-msgstr ""
+msgstr "Anexo B G.992.1"
msgid "Annex B G.992.3"
-msgstr ""
+msgstr "Anexo B G.992.3"
msgid "Annex B G.992.5"
-msgstr ""
+msgstr "Anexo B G.992.5"
msgid "Annex J (all)"
-msgstr ""
+msgstr "Anexo J (todo)"
msgid "Annex L G.992.3 POTS 1"
-msgstr ""
+msgstr "Anexo L G.992.3 POTS 1"
msgid "Annex M (all)"
-msgstr ""
+msgstr "Anexo M (todo)"
msgid "Annex M G.992.3"
-msgstr ""
+msgstr "Anexo M G.992.3"
msgid "Annex M G.992.5"
-msgstr ""
+msgstr "Anexo M G.992.5"
msgid "Announce as default router even if no public prefix is available."
msgstr ""
+"Anuncie-se como rotador padrão mesmo se não existir um prefixo público."
msgid "Announced DNS domains"
-msgstr ""
+msgstr "Domínios DNS anunciados"
msgid "Announced DNS servers"
-msgstr ""
+msgstr "Servidores DNS anunciados"
msgid "Anonymous Identity"
-msgstr ""
+msgstr "Identidade Anônima"
msgid "Anonymous Mount"
-msgstr ""
+msgstr "Montagem Anônima"
msgid "Anonymous Swap"
-msgstr ""
+msgstr "Espaço de Troca (swap) Anônimo"
msgid "Antenna 1"
msgstr "Antena 1"
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgstr ""
+"Atribua uma parte do comprimento de cada prefixo IPv6 público para esta "
+"interface"
msgid "Assign interfaces..."
msgstr "atribuir as interfaces"
msgid ""
"Assign prefix parts using this hexadecimal subprefix ID for this interface."
msgstr ""
+"Atribua partes do prefixo usando este identificador hexadecimal do "
+"subprefixo para esta interface"
msgid "Associated Stations"
msgstr "Estações associadas"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Controlador Wireless Atheros 802.11%s"
-
msgid "Auth Group"
-msgstr ""
+msgstr "Grupo de Autenticação"
msgid "AuthGroup"
-msgstr ""
+msgstr "Grupo de Autenticação"
msgid "Authentication"
msgstr "Autenticação"
+msgid "Authentication Type"
+msgstr "Tipo de Autenticação"
+
msgid "Authoritative"
msgstr "Autoritário"
msgstr "Atualização Automática"
msgid "Automatic"
-msgstr ""
+msgstr "Automático"
msgid "Automatic Homenet (HNCP)"
msgstr ""
+"Rede Doméstica Automática (<abbr title=\"Homenet Control Protocol\">HNCP</"
+"abbr>)"
msgid "Automatically check filesystem for errors before mounting"
msgstr ""
+"Execute automaticamente a verificação do sistema de arquivos antes da "
+"montagem do dispositivo"
msgid "Automatically mount filesystems on hotplug"
-msgstr ""
+msgstr "Monte automaticamente o espaço de troca (swap) ao conectar"
msgid "Automatically mount swap on hotplug"
-msgstr ""
+msgstr "Monte automaticamente o espaço de troca (swap) ao conectar"
msgid "Automount Filesystem"
-msgstr ""
+msgstr "Montagem Automática de Sistema de Arquivo"
msgid "Automount Swap"
-msgstr ""
+msgstr "Montagem Automática do Espaço de Troca (swap) "
msgid "Available"
msgstr "Disponível"
msgstr "Média:"
msgid "B43 + B43C"
-msgstr ""
+msgstr "B43 + B43C"
msgid "B43 + B43C + V43"
-msgstr ""
+msgstr "B43 + B43C + V43"
msgid "BR / DMR / AFTR"
-msgstr ""
+msgstr "BR / DMR / AFTR"
msgid "BSSID"
msgstr "BSSID"
msgid "Back to scan results"
msgstr "Voltar para os resultados da busca"
-msgid "Background Scan"
-msgstr "Busca em Segundo Plano"
-
msgid "Backup / Flash Firmware"
msgstr "Cópia de Segurança / Gravar Firmware"
msgstr "Endereço especificado está incorreto!"
msgid "Band"
-msgstr ""
+msgstr "Banda"
msgid "Behind NAT"
-msgstr ""
+msgstr "Atrás da NAT"
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"de configuração alterados marcados pelo opkg, arquivos base essenciais e "
"padrões para a cópia de segurança definidos pelo usuário."
+msgid "Bind interface"
+msgstr "Interface Vinculada"
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+"Vincule somente para as explicitamenteinterfaces ao invés do endereço "
+"coringa."
+
+msgid "Bind the tunnel to this interface (optional)."
+msgstr "Vincule o túnel a esta interface (opcional)"
msgid "Bitrate"
msgstr "Taxa de bits"
"Build/distribution specific feed definitions. This file will NOT be "
"preserved in any sysupgrade."
msgstr ""
+"Fonte de pacotes específico da compilação/distribuição. Esta NÃO será "
+"preservada em qualquer atualização do sistema."
msgid "Buttons"
msgstr "Botões"
msgid "CA certificate; if empty it will be saved after the first connection."
msgstr ""
+"Certificado da CA; se em branco, será salvo depois da primeira conexão."
msgid "CPU usage (%)"
msgstr "Uso da CPU (%)"
msgstr "Cancelar"
msgid "Category"
-msgstr ""
+msgstr "Categoria"
msgid "Chain"
msgstr "Cadeia"
msgid "Check fileystems before mount"
msgstr ""
+"Execute a verificação do sistema de arquivos antes da montagem do dispositivo"
+
+msgid "Check this option to delete the existing networks from this radio."
+msgstr "Marque esta opção para remover as redes existentes neste rádio."
msgid "Checksum"
msgstr "Soma de verificação"
msgstr "Cifra"
msgid "Cisco UDP encapsulation"
-msgstr ""
+msgstr "Encapsulamento UDP da Cisco"
msgid ""
"Click \"Generate archive\" to download a tar archive of the current "
msgid "Common Configuration"
msgstr "Configuração Comum"
-msgid "Compression"
-msgstr "Compressão"
-
msgid "Configuration"
msgstr "Configuração"
msgstr "Limite de conexão"
msgid "Connection to server fails when TLS cannot be used"
-msgstr ""
+msgstr "A conexão para este servidor falhará quando o TLS não puder ser usado"
msgid "Connections"
msgstr "Conexões"
msgstr "Interface Personalizada"
msgid "Custom delegated IPv6-prefix"
-msgstr ""
+msgstr "Prefixo IPv6 delegado personalizado"
msgid ""
"Custom feed definitions, e.g. private feeds. This file can be preserved in a "
"sysupgrade."
msgstr ""
+"Definições de fonte de pacotes personalizadas, ex: fontes privadas. Este "
+"arquivo será preservado em uma atualização do sistema."
msgid "Custom feeds"
-msgstr ""
+msgstr "Fontes de pacotes customizadas"
msgid ""
"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
msgstr "Alocações DHCPv6"
msgid "DHCPv6 client"
-msgstr ""
+msgstr "Cliente DHCPv6"
msgid "DHCPv6-Mode"
-msgstr ""
+msgstr "Modo DHCPv6"
msgid "DHCPv6-Service"
-msgstr ""
+msgstr "Serviço DHCPv6"
msgid "DNS"
msgstr "DNS"
msgstr "Encaminhamentos DNS"
msgid "DNS-Label / FQDN"
-msgstr ""
+msgstr "Rótulo DNS / FQDN"
msgid "DNSSEC"
-msgstr ""
+msgstr "DNSSEC"
msgid "DNSSEC check unsigned"
-msgstr ""
+msgstr "Verificar DNSSEC sem assinatura"
msgid "DPD Idle Timeout"
-msgstr ""
+msgstr "Tempo de expiração para ociosidade do DPD"
msgid "DS-Lite AFTR address"
-msgstr ""
+msgstr "Endereço DS-Lite AFTR"
msgid "DSL"
-msgstr ""
+msgstr "DSL"
msgid "DSL Status"
-msgstr ""
+msgstr "Estado da DSL"
msgid "DSL line mode"
-msgstr ""
+msgstr "Modo de linha DSL"
msgid "DUID"
msgstr "DUID"
msgid "Data Rate"
-msgstr ""
+msgstr "Taxa de Dados"
msgid "Debug"
msgstr "Depurar"
msgstr "Roteador Padrão"
msgid "Default is stateless + stateful"
-msgstr ""
+msgstr "O padrão é sem estado + com estado"
msgid "Default route"
-msgstr ""
+msgstr "Rota padrão"
msgid "Default state"
msgstr "Estado padrão"
msgstr "Configuração do Dispositivo"
msgid "Device is rebooting..."
-msgstr ""
+msgstr "O dispositivo está reiniciando..."
msgid "Device unreachable"
-msgstr ""
+msgstr "Dispositivo não alcançável"
msgid "Diagnostics"
msgstr "Diagnóstico"
msgstr "Desabilita a configuração do DNS"
msgid "Disable Encryption"
-msgstr ""
-
-msgid "Disable HW-Beacon timer"
-msgstr "Desativar temporizador de Beacon de Hardware"
+msgstr "Desabilitar Cifragem"
msgid "Disabled"
msgstr "Desabilitado"
+msgid "Disabled (default)"
+msgstr "Desabilitado (padrão)"
+
msgid "Discard upstream RFC1918 responses"
msgstr ""
"Descartar respostas de servidores externos para redes privadas (RFC1918)"
msgstr "Distância para o computador mais distante da rede (em metros)."
msgid "Distribution feeds"
-msgstr ""
+msgstr "Fontes de pacotes da distribuição"
msgid "Diversity"
msgstr "Diversidade"
msgid "Do not forward reverse lookups for local networks"
msgstr "Não encaminhe buscas por endereço reverso das redes local"
-msgid "Do not send probe responses"
-msgstr "Não enviar respostas de exames"
-
msgid "Domain required"
msgstr "Requerer domínio"
msgid "Domain whitelist"
msgstr "Lista branca de domínios"
+msgid "Don't Fragment"
+msgstr "Não Fragmentar"
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
"integrado"
msgid "Dual-Stack Lite (RFC6333)"
-msgstr ""
+msgstr "Duas Pilhas Leve (RFC6333)"
msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
msgstr ""
"somente os clientes com atribuições estáticas serão servidos. "
msgid "EA-bits length"
-msgstr ""
+msgstr "Comprimento dos bits EA"
msgid "EAP-Method"
msgstr "Método EAP"
"Edit the raw configuration data above to fix any error and hit \"Save\" to "
"reload the page."
msgstr ""
+"Edite os dados de configuração brutos abaixo para arrumar qualquer erro e "
+"clique em \"Salvar\" para recarregar a página."
msgid "Edit this interface"
msgstr "Editar esta interface"
msgid "Enable HE.net dynamic endpoint update"
msgstr "Ativar a atualização de ponto final dinâmico HE.net"
+msgid "Enable IPv6 negotiation"
+msgstr "Ativar a negociação de IPv6"
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "Ativar a negociação de IPv6 no enlace PPP"
msgstr "Ativar o cliente <abbr title=\"Network Time Protocol\">NTP</abbr>"
msgid "Enable Single DES"
-msgstr ""
+msgstr "Habilitar DES Simples"
msgid "Enable TFTP server"
msgstr "Ativar servidor TFTP"
msgstr "Ativar funcionalidade de VLAN"
msgid "Enable WPS pushbutton, requires WPA(2)-PSK"
-msgstr ""
+msgstr "Habilite o botão WPS. requer WPA(2)-PSK"
msgid "Enable learning and aging"
msgstr "Ativar o aprendizado e obsolescência"
msgid "Enable mirroring of incoming packets"
-msgstr ""
+msgstr "Habilitar espelhamento dos pacotes entrantes"
msgid "Enable mirroring of outgoing packets"
-msgstr ""
+msgstr "Habilitar espelhamento dos pacotes saintes"
+
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr "Habilita o campo DF (Não Fragmentar) dos pacotes encapsulados."
msgid "Enable this mount"
msgstr "Ativar esta montagem"
msgid "Enabled"
msgstr "Ativado"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+"Ativa a troca rápida entre pontos de acesso que pertencem ao mesmo Domínio "
+"de Mobilidade"
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "Ativa o protocolo STP nesta ponte"
msgid "Encryption"
msgstr "Cifragem"
+msgid "Endpoint Host"
+msgstr "Equipamento do ponto final"
+
+msgid "Endpoint Port"
+msgstr "Porta do ponto final"
+
msgid "Erasing..."
msgstr "Apagando..."
msgstr "Erro"
msgid "Errored seconds (ES)"
-msgstr ""
+msgstr "Segundos com erro (ES)"
msgid "Ethernet Adapter"
msgstr "Adaptador Ethernet"
msgstr "Switch Ethernet"
msgid "Exclude interfaces"
-msgstr ""
+msgstr "Excluir interfaces"
msgid "Expand hosts"
msgstr "Expandir arquivos de equipamentos conhecidos (hosts)"
msgid "Expires"
msgstr "Expira"
-#, fuzzy
msgid ""
"Expiry time of leased addresses, minimum is 2 minutes (<code>2m</code>)."
msgstr ""
"code>)."
msgid "External"
-msgstr ""
+msgstr "Externo"
+
+msgid "External R0 Key Holder List"
+msgstr "Lista dos Detentor de Chave R0 Externa"
+
+msgid "External R1 Key Holder List"
+msgstr "Lista dos Detentor de Chave R1 Externa"
msgid "External system log server"
msgstr "Servidor externo de registros do sistema (syslog)"
msgstr "Porta do servidor externo de registro do sistema (syslog)"
msgid "External system log server protocol"
-msgstr ""
+msgstr "Protocolo do servidor externo de registro do sistema (syslog)"
msgid "Extra SSH command options"
-msgstr ""
-
-msgid "Fast Frames"
-msgstr "Quadros Rápidos"
+msgstr "Opções adicionais do comando SSH"
msgid "File"
msgstr "Arquivo"
"Find all currently attached filesystems and swap and replace configuration "
"with defaults based on what was detected"
msgstr ""
+"Encontre todos os sistemas de arquivos e espaços de troca (swap) atualmente "
+"conectados e substitua a configuração com valores padrão baseados no que foi "
+"detectado"
msgid "Find and join network"
msgstr "Procurar e conectar à rede"
msgid "Firewall"
msgstr "Firewall"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Configurações do Firewall"
msgstr "Estado do Firewall"
msgid "Firmware File"
-msgstr ""
+msgstr "Arquivo da Firmware"
msgid "Firmware Version"
msgstr "Versão do Firmware"
msgstr "Forçar TKIP e CCMP (AES)"
msgid "Force use of NAT-T"
-msgstr ""
+msgstr "Force o uso do NAT-T"
msgid "Form token mismatch"
-msgstr ""
+msgstr "Chave eletrônica do formulário não casa"
msgid "Forward DHCP traffic"
msgstr "Encaminhar tráfego DHCP"
msgid "Forward Error Correction Seconds (FECS)"
msgstr ""
+"Segundos a frente de correção de erros ( <abbr title=\"Forward Error "
+"Correction Seconds\">FECS</abbr>)"
msgid "Forward broadcast traffic"
msgstr "Encaminhar tráfego broadcast"
msgid "Free space"
msgstr "Espaço livre"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+"Mais informações sobre interfaces e parceiros WireGuard em <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+
msgid "GHz"
msgstr "GHz"
msgstr "Configurações Gerais"
msgid "General options for opkg"
-msgstr ""
+msgstr "Opções gerais para o opkg"
msgid "Generate Config"
-msgstr ""
+msgstr "Gerar Configuração"
msgid "Generate archive"
msgstr "Gerar arquivo"
msgstr "A senha de confirmação informada não casa. Senha não alterada!"
msgid "Global Settings"
-msgstr ""
+msgstr "Configurações Globais"
msgid "Global network options"
-msgstr ""
+msgstr "Opções de rede globais"
msgid "Go to password configuration..."
msgstr "Ir para a configuração de senha..."
msgstr "Ir para a página de configuração pertinente"
msgid "Group Password"
-msgstr ""
+msgstr "Senha do Grupo"
msgid "Guest"
-msgstr ""
+msgstr "Convidado\t"
msgid "HE.net password"
msgstr "Senha HE.net"
msgid "HE.net username"
+msgstr "Usuário do HE.net"
+
+msgid "HT mode (802.11n)"
msgstr ""
+"Modo <abbr title=\"High Throughput/Alta Taxa de Transferência\">HT</abbr> "
+"(802.11n)"
# Não sei que contexto isto está sendo usado
msgid "Handler"
msgid "Header Error Code Errors (HEC)"
msgstr ""
+"Erros de Código de Erro de Cabeçalho (<abbr title=\"Header Error Code\">HEC</"
+"abbr>)"
msgid "Heartbeat"
-msgstr ""
+msgstr "Pulso de vida"
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"\">ESSID</abbr>"
msgid "Host"
-msgstr ""
+msgstr "Equipamento"
msgid "Host entries"
msgstr "Entradas de Equipamentos"
msgstr "Nome dos equipamentos"
msgid "Hybrid"
-msgstr ""
+msgstr "Híbrido"
msgid "IKE DH Group"
msgstr ""
+"Grupo <abbr title=\"Diffie-Hellman\">DH</abbr> do <abbr title=\"Internet "
+"Key Exchange/Troca de Chaves na Internet\">IKE</abbr>"
+
+msgid "IP Addresses"
+msgstr "Endereços IP"
msgid "IP address"
msgstr "Endereço IP"
msgstr "IPv4 e IPv6"
msgid "IPv4 assignment length"
-msgstr ""
+msgstr "Tamanho da atribuição IPv4"
msgid "IPv4 broadcast"
msgstr "Broadcast IPv4"
msgstr "Somente IPv4"
msgid "IPv4 prefix"
-msgstr ""
+msgstr "Prefixo IPv4"
msgid "IPv4 prefix length"
msgstr "Tamanho do prefixo IPv4"
msgid "IPv4-Address"
msgstr "Endereço IPv4"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr "IPv4-in-IPv4 (RFC2003)"
+
msgid "IPv6"
msgstr "IPv6"
msgstr "Firewall para IPv6"
msgid "IPv6 Neighbours"
-msgstr ""
+msgstr "Vizinhos IPv6"
msgid "IPv6 Settings"
-msgstr ""
+msgstr "Configurações IPv6"
msgid "IPv6 ULA-Prefix"
msgstr ""
+"Prefixo <abbr title=\"Unique Local Address/Endereço Local Único\">ULA</abbr> "
+"IPv6"
msgid "IPv6 WAN Status"
msgstr "Estado IPv6 da WAN"
msgstr "Endereço IPv6"
msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
-msgstr ""
+msgstr "Endereços IPv6 delegados para o ponta local do túnel (opcional)"
msgid "IPv6 assignment hint"
-msgstr ""
+msgstr "Sugestão de atribuição IPv6"
msgid "IPv6 assignment length"
-msgstr ""
+msgstr "Tamanho da atribuição IPv6"
msgid "IPv6 gateway"
msgstr "Roteador padrão do IPv6"
msgstr "Tamanho Prefixo IPv6"
msgid "IPv6 routed prefix"
-msgstr ""
+msgstr "Prefixo roteável IPv6"
msgid "IPv6-Address"
msgstr "Endereço IPv6"
+msgid "IPv6-PD"
+msgstr "IPv6-PD"
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6-in-IPv4 (RFC4213)"
msgstr "Identidade PEAP"
msgid "If checked, 1DES is enaled"
-msgstr ""
+msgstr "Se marcado, a cifragem 1DES será habilitada"
msgid "If checked, encryption is disabled"
-msgstr ""
+msgstr "Se marcado, a cifragem estará desabilitada"
msgid ""
"If specified, mount the device by its UUID instead of a fixed device node"
"In order to prevent unauthorized access to the system, your request has been "
"blocked. Click \"Continue »\" below to return to the previous page."
msgstr ""
+"Para prevenir acesso não autorizado neste sistema, sua requisição foi "
+"bloqueada. Clique abaixo em \"Continuar »\" para retornar à página anterior."
msgid "Inactivity timeout"
msgstr "Tempo limite de inatividade"
msgstr "Instalar"
msgid "Install iputils-traceroute6 for IPv6 traceroute"
-msgstr ""
+msgstr "Instale iputils-traceroute6 para rastrear rotas IPv6"
msgid "Install package %q"
msgstr "Instalar pacote %q"
msgstr "A interface está desligando..."
msgid "Interface name"
-msgstr ""
+msgstr "Nome da Interface"
msgid "Interface not present or not connected yet."
msgstr "A interface não está presente ou não está conectada ainda."
msgstr "Interfaces"
msgid "Internal"
-msgstr ""
+msgstr "Interno"
msgid "Internal Server Error"
msgstr "erro no servidor interno"
msgid "Invalid username and/or password! Please try again."
msgstr "Usuário e/ou senha inválida! Por favor, tente novamente."
-#, fuzzy
msgid ""
"It appears that you are trying to flash an image that does not fit into the "
"flash memory, please verify the image file!"
"A imagem que está a tentar carregar aparenta nao caber na flash do "
"equipamento. Por favor verifique o arquivo da imagem!"
-msgid "Java Script required!"
-msgstr "É necessário Java Script!"
+msgid "JavaScript required!"
+msgstr "É necessário JavaScript!"
msgid "Join Network"
msgstr "Conectar à Rede"
msgstr "Conectar à Rede: Busca por Rede Sem Fio"
msgid "Joining Network: %q"
-msgstr ""
+msgstr "Juntando-se à rede %q"
msgid "Keep settings"
msgstr "Manter configurações"
msgstr "Idioma e Estilo"
msgid "Latency"
-msgstr ""
+msgstr "Latência"
msgid "Leaf"
-msgstr ""
+msgstr "Folha"
msgid "Lease time"
-msgstr ""
+msgstr "Tempo de concessão"
msgid "Lease validity time"
msgstr "Tempo de validade da atribuição"
msgid "Limit DNS service to subnets interfaces on which we are serving DNS."
msgstr ""
+"Limite o serviço DNS para subredes das interfaces nas quais estamos servindo "
+"DNS."
msgid "Limit listening to these interfaces, and loopback."
-msgstr ""
+msgstr "Escute somente nestas interfaces e na interface local (loopback) "
msgid "Line Attenuation (LATN)"
-msgstr ""
+msgstr "Atenuação de Linha (<abbr title=\"Line Attenuation\">LATN</abbr>)"
msgid "Line Mode"
-msgstr ""
+msgstr "Modo da Linha"
msgid "Line State"
-msgstr ""
+msgstr "Estado da Linha"
msgid "Line Uptime"
-msgstr ""
+msgstr "Tempo de Atividade da Linha"
msgid "Link On"
msgstr "Enlace Ativo"
"Lista dos servidores <abbr title=\"Domain Name System\">DNS</abbr> para "
"encaminhar as requisições"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+"Lista dos R0KHs no mesmo Domínio de Mobilidade. <br /> Formato: Endereço "
+"MAC, Identificador NAS, chave de 128 bits como cadeia hexadecimal. <br /> "
+"Esta lista é usada para mapear o Identificador R0KH (Identificador NAS) para "
+"um endereço MAC de destino ao solicitar a chave PMK-R1 a partir do R0KH que "
+"o STA usado durante a Associação de Domínio de Mobilidade Inicial."
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+"Lista dos R1KHs no mesmo Domínio de Mobilidade. <br /> Formato: Endereço "
+"MAC, R1KH-ID como 6 octetos com dois pontos, chave de 128 bits como cadeia "
+"hexadecimal. <br /> Esta lista é usada para mapear o identificador R1KH para "
+"um endereço MAC de destino ao enviar a chave PMK-R1 a partir do R0KH. Esta é "
+"também a lista de R1KHs autorizados no MD que podem solicitar chaves PMK-R1."
+
msgid "List of SSH key files for auth"
-msgstr ""
+msgstr "Lista de arquivos de chaves SSH para autenticação"
msgid "List of domains to allow RFC1918 responses for"
msgstr ""
"fornecem resultados errados para consultas a domínios inexistentes (NX)"
msgid "Listen Interfaces"
-msgstr ""
+msgstr "Interfaces de Escuta"
+
+msgid "Listen Port"
+msgstr "Porta de Escuta"
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
msgstr "Carregando"
msgid "Local IP address to assign"
-msgstr ""
+msgstr "Endereço IP local para atribuir"
msgid "Local IPv4 address"
msgstr "Endereço IPv4 local"
msgstr "Endereço IPv6 local"
msgid "Local Service Only"
-msgstr ""
+msgstr "Somente Serviço Local"
msgid "Local Startup"
msgstr "Iniciação Local"
msgid "Local domain"
msgstr "Domínio Local"
-#, fuzzy
msgid ""
"Local domain specification. Names matching this domain are never forwarded "
"and are resolved from DHCP or hosts files only"
msgstr "Localizar consultas"
msgid "Locked to channel %s used by: %s"
-msgstr ""
+msgstr "Travado no canal %s usado por: %s"
msgid "Log output level"
msgstr "Nível de detalhamento de saída dos registros"
msgid "Loss of Signal Seconds (LOSS)"
msgstr ""
+"Segundos de Perda de Sinal (<abbr title=\"Loss of Signal Seconds\">LOSS</"
+"abbr>)"
msgid "Lowest leased address as offset from the network address."
msgstr "O endereço mais baixo concedido como deslocamento do endereço da rede."
msgstr "Lista de MAC"
msgid "MAP / LW4over6"
-msgstr ""
+msgstr "MAP / LW4over6"
msgid "MB/s"
msgstr "MB/s"
msgid "MD5"
-msgstr ""
+msgstr "MD5"
msgid "MHz"
msgstr "MHz"
"Make sure to clone the root filesystem using something like the commands "
"below:"
msgstr ""
+"Certifique-se que clonou o sistema de arquivos raiz com algo como o comando "
+"abaixo:"
msgid "Manual"
-msgstr ""
+msgstr "Manual"
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-
-msgid "Maximum Rate"
-msgstr "Taxa Máxima"
+"Taxa de Dados Atingível Máxima (<abbr title=\"Maximum Attainable Data Rate"
+"\">ATTNDR</abbr>)"
msgid "Maximum allowed number of active DHCP leases"
msgstr "Número máximo permitido de alocações DHCP ativas"
"Maximum length of the name is 15 characters including the automatic protocol/"
"bridge prefix (br-, 6in4-, pppoe- etc.)"
msgstr ""
+"Comprimento máximo do nome é de 15 caracteres, incluindo o prefixo "
+"automático do protocolo/ponte (br-, 6in4- pppoe-, etc.)"
msgid "Maximum number of leased addresses."
msgstr "Número máximo de endereços atribuídos."
msgid "Metric"
msgstr "Métrica"
-msgid "Minimum Rate"
-msgstr "Taxa Mínima"
-
msgid "Minimum hold time"
msgstr "Tempo mínimo de espera"
msgid "Mirror monitor port"
-msgstr ""
+msgstr "Porta de monitoramento do espelho"
msgid "Mirror source port"
-msgstr ""
+msgstr "Porta de origem do espelho"
msgid "Missing protocol extension for proto %q"
msgstr "Extensão para o protocolo %q está ausente"
+msgid "Mobility Domain"
+msgstr "Domínio da Mobilidade"
+
msgid "Mode"
msgstr "Modo"
msgid "Model"
-msgstr ""
+msgstr "Modelo"
msgid "Modem device"
msgstr "Dispositivo do Modem"
"anexado ao sistema de arquivos"
msgid "Mount filesystems not specifically configured"
-msgstr ""
+msgstr "Monte sistemas de arquivos não especificamente configurados"
msgid "Mount options"
msgstr "Opções de montagem"
msgstr "Ponto de montagem"
msgid "Mount swap not specifically configured"
-msgstr ""
+msgstr "Montar espalho de troca (swap) não especificamente configurado"
msgid "Mounted file systems"
msgstr "Sistemas de arquivos montados"
msgid "Move up"
msgstr "Mover para cima"
-msgid "Multicast Rate"
-msgstr "Taxa de Multicast"
-
msgid "Multicast address"
msgstr "Endereço de Multicast"
msgstr "NAS ID"
msgid "NAT-T Mode"
-msgstr ""
+msgstr "Modo NAT-T"
msgid "NAT64 Prefix"
-msgstr ""
+msgstr "Prefixo NAT64"
msgid "NDP-Proxy"
-msgstr ""
+msgstr "Proxy NDP"
msgid "NT Domain"
-msgstr ""
+msgstr "Domínio NT"
msgid "NTP server candidates"
msgstr "Candidatos a servidor NTP"
msgid "NTP sync time-out"
-msgstr ""
+msgstr "Tempo limite da sincronia do NTP"
msgid "Name"
msgstr "Nome"
msgstr "Nenhum Servidor DHCP configurado para esta interface"
msgid "No NAT-T"
-msgstr ""
+msgstr "Sem NAT-T"
msgid "No chains in this table"
msgstr "Nenhuma cadeira nesta tabela"
msgstr "Ruído"
msgid "Noise Margin (SNR)"
-msgstr ""
+msgstr "Margem de Ruído (<abbr title=\"Noise Margin\">SNR</abbr>)"
msgid "Noise:"
msgstr "Ruído:"
msgid "Non Pre-emtive CRC errors (CRC_P)"
msgstr ""
+"Erros CRC Não Preemptivos<abbr title=\"Non Pre-emptive CRC errors\">CRC_P</"
+"abbr>"
msgid "Non-wildcard"
-msgstr ""
+msgstr "Sem caracter curinga"
msgid "None"
msgstr "Nenhum"
msgstr "Nota: Os arquivos de configuração serão apagados."
msgid "Note: interface name length"
-msgstr ""
+msgstr "Aviso: tamanho do nome da interface"
msgid "Notice"
msgstr "Aviso"
msgstr "Configuração-OPKG"
msgid "Obfuscated Group Password"
-msgstr ""
+msgstr "Senha Ofuscada do Grupo"
msgid "Obfuscated Password"
-msgstr ""
+msgstr "Senha Ofuscada"
msgid "Off-State Delay"
msgstr "Atraso no estado de desligado"
msgstr "Um ou mais campos contém valores inválidos!"
msgid "One or more invalid/required values on tab"
-msgstr ""
+msgstr "Um ou mais valores inválidos/obrigatórios na aba"
msgid "One or more required fields have no value!"
msgstr "Um ou mais campos obrigatórios não tem valor!"
msgstr "Abrir lista..."
msgid "OpenConnect (CISCO AnyConnect)"
-msgstr ""
+msgstr "OpenConnect (CISCO AnyConnect)"
msgid "Operating frequency"
-msgstr ""
+msgstr "Frequência de Operação"
msgid "Option changed"
msgstr "Opção alterada"
msgid "Option removed"
msgstr "Opção removida"
+msgid "Optional"
+msgstr "Opcional"
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
+"Opcional, especifique para sobrescrever o servidor padrão (tic.sixxs.net)"
msgid "Optional, use when the SIXXS account has more than one tunnel"
+msgstr "Opcional, para usar quando a conta SIXXS tem mais de um túnel"
+
+msgid "Optional."
+msgstr "Opcional."
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+"Opcional. Adiciona uma camada extra de cifragem simétrica para resistência "
+"pós quântica."
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr "Opcional. Cria rotas para endereços IP Autorizados para este parceiro."
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+"Opcional. Equipamento do parceiro. Nomes serão resolvido antes de levantar a "
+"interface."
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr "Opcional. Unidade Máxima de Transmissão da interface do túnel."
+
+msgid "Optional. Port of peer."
+msgstr "Opcional. Porta do parceiro."
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
msgstr ""
+"Opcional. Segundos entre mensagens para manutenção da conexão. O padrão é 0 "
+"(desabilitado). O valor recomendado caso este dispositivo esteja atrás de "
+"uma NAT é 25."
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr "opcional. Porta UDP usada para pacotes saintes ou entrantes."
msgid "Options"
msgstr "Opções"
msgid "Outbound:"
msgstr "Saindo:"
-msgid "Outdoor Channels"
-msgstr "Canais para externo"
-
msgid "Output Interface"
-msgstr ""
+msgstr "Interface de Saída"
msgid "Override MAC address"
msgstr "Sobrescrever o endereço MAC"
msgid "Override MTU"
-msgstr "Sobrescrever o MTU"
+msgstr ""
+"Sobrescrever o <abbr title=\"Maximum Transmission Unit/Unidade Máxima de "
+"Transmissão\">MTU</abbr>"
+
+msgid "Override TOS"
+msgstr "Sobrescrever o TOS"
+
+msgid "Override TTL"
+msgstr "Sobrescrever o TTL"
msgid "Override default interface name"
-msgstr ""
+msgstr "Sobrescrever o nome da nova interface"
msgid "Override the gateway in DHCP responses"
msgstr "Sobrescrever o roteador padrão nas respostas do DHCP"
msgid "PIN"
msgstr "PIN"
+msgid "PMK R1 Push"
+msgstr "PMK R1 Push"
+
msgid "PPP"
msgstr "PPP"
msgstr "PPPoE"
msgid "PPPoSSH"
-msgstr ""
+msgstr "PPPoSSH"
msgid "PPtP"
msgstr "PPtP"
msgid "PSID offset"
-msgstr ""
+msgstr "Deslocamento PSID"
msgid "PSID-bits length"
-msgstr ""
+msgstr "Comprimento dos bits PSID"
msgid "PTM/EFM (Packet Transfer Mode)"
-msgstr ""
+msgstr "PTM/EFM (Modo de Transferência de Pacotes)"
msgid "Package libiwinfo required!"
msgstr "O pacote libiwinfo é necessário!"
msgstr "Senha da Chave Privada"
msgid "Password of inner Private Key"
-msgstr ""
+msgstr "Senha da Chave Privada interna"
msgid "Password successfully changed!"
msgstr "A senha foi alterada com sucesso!"
msgstr "Caminho para o executável que trata o evento do botão"
msgid "Path to inner CA-Certificate"
-msgstr ""
+msgstr "Caminho para os certificados CA interno"
msgid "Path to inner Client-Certificate"
-msgstr ""
+msgstr "Caminho para o Certificado do Cliente interno"
msgid "Path to inner Private Key"
-msgstr ""
+msgstr "Caminho para a Chave Privada interna"
msgid "Peak:"
msgstr "Pico:"
msgid "Peer IP address to assign"
-msgstr ""
+msgstr "Endereço IP do parceiro para atribuir"
+
+msgid "Peers"
+msgstr "Parceiros"
msgid "Perfect Forward Secrecy"
-msgstr ""
+msgstr "Sigilo Encaminhado Perfeito"
msgid "Perform reboot"
msgstr "Reiniciar o sistema"
msgid "Perform reset"
msgstr "Zerar configuração"
+msgid "Persistent Keep Alive"
+msgstr "Manutenção da Conexão Persistente"
+
msgid "Phy Rate:"
msgstr "Taxa física:"
msgstr "Status da porta"
msgid "Power Management Mode"
-msgstr ""
+msgstr "Modo de Gerenciamento de Energia"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+"Erros CRC Preemptivos<abbr title=\"Pre-emptive CRC errors\">CRCP_P</abbr>"
+
+msgid "Prefix Delegated"
+msgstr "Prefixo Delegado"
+
+msgid "Preshared Key"
+msgstr "Chave Compartilhada"
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"echo do LCP. Use 0 para ignorar as falhas"
msgid "Prevent listening on these interfaces."
-msgstr ""
+msgstr "Evite escutar nestas Interfaces."
msgid "Prevents client-to-client communication"
msgstr "Impede a comunicação de cliente para cliente"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Prism2/2.5/3 802.11b Wireless Controlador"
+msgid "Private Key"
+msgstr "Chave Privada"
+
msgid "Proceed"
msgstr "Proceder"
msgstr "Processos"
msgid "Profile"
-msgstr ""
+msgstr "Perfil"
msgid "Prot."
msgstr "Protocolo"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Ad-Hoc falso (ahdemo)"
+msgid "Public Key"
+msgstr "Chave Pública"
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+"Prefixo público roteado para este dispositivo para distribuição a seus "
+"clientes."
+
+msgid "QMI Cellular"
+msgstr "Celular QMI"
msgid "Quality"
msgstr "Qualidade"
+msgid "R0 Key Lifetime"
+msgstr "Validade da Chave R0"
+
+msgid "R1 Key Holder"
+msgstr "Detentor da Chave R1"
+
msgid "RFC3947 NAT-T mode"
-msgstr ""
+msgstr "Modo NAT-T (RFC3947)"
msgid "RTS/CTS Threshold"
msgstr "Limiar RTS/CTS"
msgid "Really reset all changes?"
msgstr "Realmente limpar todas as mudanças?"
-#, fuzzy
msgid ""
"Really shut down network?\\nYou might lose access to this device if you are "
"connected via this interface."
msgid "Realtime Wireless"
msgstr "Rede sem fio em Tempo Real"
+msgid "Reassociation Deadline"
+msgstr "Limite para Reassociação"
+
msgid "Rebind protection"
msgstr "Proteção contra \"Rebind\""
msgid "Receiver Antenna"
msgstr "Antena de Recepção"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr "Recomendado. Endereços IP da interface do WireGuard."
+
msgid "Reconnect this interface"
msgstr "Reconectar esta interface"
msgid "References"
msgstr "Referências"
-msgid "Regulatory Domain"
-msgstr "Domínio Regulatório"
-
msgid "Relay"
msgstr "Retransmissor"
msgid "Remote IPv4 address"
msgstr "Endereço IPv4 remoto"
+msgid "Remote IPv4 address or FQDN"
+msgstr "Endereço IPv4 remoto ou FQDN"
+
msgid "Remove"
msgstr "Remover"
msgstr "Substituir a configuração da rede sem fio"
msgid "Request IPv6-address"
-msgstr ""
+msgstr "Solicita endereço IPv6"
msgid "Request IPv6-prefix of length"
-msgstr ""
+msgstr "Solicita prefixo IPv6 de tamanho"
msgid "Require TLS"
-msgstr ""
+msgstr "Requer TLS"
+
+msgid "Required"
+msgstr "Necessário"
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr "Requerido para alguns provedores de internet, ex. Charter com DOCSIS 3"
+msgstr ""
+"Obrigatório para alguns provedores de internet, ex. Charter com DOCSIS 3"
+
+msgid "Required. Base64-encoded private key for this interface."
+msgstr "Obrigatório. Chave privada codificada em Base64 para esta interface."
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr "Necessário. Chave Pública do parceiro codificada como Base64."
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+"Obrigatório. Endereços IP e prefixos que este parceiro está autorizado a "
+"usar dentro do túnel. Normalmente é o endereço IP do parceiro no túnel e as "
+"redes que o parceiro roteia através do túnel."
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr "Obrigatório. Chave Pública do parceiro."
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgstr ""
+"Exige o suporte DNSSEC do servidor superior; verifica se resposta não "
+"assinadas realmente vẽm de domínios não assinados."
msgid "Reset"
msgstr "Limpar"
msgstr "Diretório raiz para arquivos disponibilizados pelo TFTP"
msgid "Root preparation"
-msgstr ""
+msgstr "Prepação da raiz (/)"
+
+msgid "Route Allowed IPs"
+msgstr "Roteie Andereços IP Autorizados"
+
+msgid "Route type"
+msgstr "Tipo de rota"
msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
+msgstr "Prefixo roteável IPv6 para interfaces internas"
msgid "Router Advertisement-Service"
-msgstr ""
+msgstr "Serviço de Anúncio de Roteador"
msgid "Router Password"
msgstr "Senha do Roteador"
msgstr "Execute a verificação do sistema de arquivos "
msgid "SHA256"
-msgstr ""
+msgstr "SHA256"
msgid ""
"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
"use 6in4 instead"
msgstr ""
+"O SIXXS suporta somente TIC. Use o 6in4 para túneis estáticos usando o "
+"protocolo IP 41 (RFC4213)"
msgid "SIXXS-handle[/Tunnel-ID]"
-msgstr ""
+msgstr "Identificador do SIXXS[/Identificador do Túnel]"
msgid "SNR"
-msgstr ""
+msgstr "SNR"
msgid "SSH Access"
msgstr "Acesso SSH"
msgid "SSH server address"
-msgstr ""
+msgstr "Endereço do servidor SSH"
msgid "SSH server port"
-msgstr ""
+msgstr "Porta do servidor SSH"
msgid "SSH username"
-msgstr ""
+msgstr "Usuário do SSH"
msgid "SSH-Keys"
msgstr "Chaves SSH"
msgid "Separate Clients"
msgstr "Isolar Clientes"
-msgid "Separate WDS"
-msgstr "Separar WDS"
-
msgid "Server Settings"
msgstr "Configurações do Servidor"
msgid "Server password"
-msgstr ""
+msgstr "Senha do servidor"
msgid ""
"Server password, enter the specific password of the tunnel when the username "
"contains the tunnel ID"
msgstr ""
+"Senha do servidor. Informe a senha para este túnel quando o nome do usuário "
+"contiver o identificador do túnel"
msgid "Server username"
-msgstr ""
+msgstr "Usuário do servidor"
msgid "Service Name"
msgstr "Nome do Serviço"
msgid "Services"
msgstr "Serviços"
-#, fuzzy
msgid "Set up Time Synchronization"
msgstr "Configurar a Sincronização do Horário"
msgid "Severely Errored Seconds (SES)"
msgstr ""
+"Segundos com erro severos (<abbr title=\"Severely Errored Seconds\">SES</"
+"abbr>)"
msgid "Short GI"
-msgstr ""
+msgstr "Intervalo de guarda curto"
msgid "Show current backup file list"
msgstr "Mostra a lista atual de arquivos para a cópia de segurança"
msgstr "Sinal"
msgid "Signal Attenuation (SATN)"
-msgstr ""
+msgstr "Atenuação do Sinal (<abbr title=\"Signal Attenuation\">SATN</abbr>)"
msgid "Signal:"
msgstr "Sinal:"
msgstr "Tamanho"
msgid "Size (.ipk)"
-msgstr ""
+msgstr "Tamanho (.ipk)"
msgid "Skip"
msgstr "Pular"
msgstr "Software"
msgid "Software VLAN"
-msgstr ""
+msgstr "VLAN em Software"
msgid "Some fields are invalid, cannot save values!"
msgstr "Alguns campos estão inválidos e os valores não podem ser salvos!"
msgid "Sorry, the server encountered an unexpected error."
msgstr "Desculpe, o servidor encontrou um erro inesperado."
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
"Sinto muito, não existe suporte para o sysupgrade. Uma nova imagem de "
-"firmware deve ser gravada manualmente. Por favor, consulte a wiki do OpenWrt "
-"para instruções específicas da instalação deste dispositivo."
+"firmware deve ser gravada manualmente. Por favor, consulte a wiki para "
+"instruções específicas da instalação deste dispositivo."
msgid "Sort"
msgstr "Ordenar"
msgstr "Origem"
msgid "Source routing"
-msgstr ""
+msgstr "Roteamento pela origem"
msgid "Specifies the button state to handle"
msgstr "Especifica o estado do botão para ser tratado"
"Especifica a quantidade máxima de segundos antes de considerar que um "
"equipamento está morto"
+msgid "Specify a TOS (Type of Service)."
+msgstr "Especifique um Tipo de Serviço (TOS)"
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+"Especifica o tempo de vida (<abbr title=\"Time to Live\">TTL</abbr>) para os "
+"pacotes encapsulados ao invés do padrão (64)."
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+"Especifica a unidade máxima de transmissão (<abbr title=\"Maximum "
+"Transmission Unit\">MTU</abbr>) ao invés do valor padrão (1280 bytes)"
+
msgid "Specify the secret encryption key here."
msgstr "Especifique a chave de cifragem secreta aqui."
msgid "Static Routes"
msgstr "Rotas Estáticas"
-msgid "Static WDS"
-msgstr "WDS Estático"
-
msgid "Static address"
msgstr "Endereço Estático"
msgstr "Enviar"
msgid "Suppress logging"
-msgstr ""
+msgstr "Suprimir registros (log)"
msgid "Suppress logging of the routine operation of these protocols"
-msgstr ""
+msgstr "Suprimir registros (log) de operações rotineiras destes protocolos"
msgid "Swap"
-msgstr ""
+msgstr "Espaço de Troca (swap)"
msgid "Swap Entry"
msgstr "Entrada do espaço de troca (Swap)"
msgid ""
"Switch %q has an unknown topology - the VLAN settings might not be accurate."
msgstr ""
+"O Switch %q tem uma topologia desconhecida - as configurações de VLAN podem "
+"não ser precisas."
msgid "Switch VLAN"
-msgstr ""
+msgstr "Switch VLAN"
msgid "Switch protocol"
msgstr "Trocar o protocolo"
msgstr "Destino"
msgid "Target network"
-msgstr ""
+msgstr "Rede de destino"
msgid "Terminate"
msgstr "Terminar"
-#, fuzzy
msgid ""
"The <em>Device Configuration</em> section covers physical settings of the "
"radio hardware such as channel, transmit power or antenna selection which "
"The HE.net endpoint update configuration changed, you must now use the plain "
"username instead of the user ID!"
msgstr ""
+"A configuração da atualização de pontas HE.net mudou. Você deve agora usar o "
+"nome do usuário ao invés do identificador do usuário!"
+
+msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr "O endereço IPv4 ou o nome completo (FQDN) da ponta remota do túnel."
msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgid "The configuration file could not be loaded due to the following error:"
msgstr ""
+"O arquivo de configuração não pode ser carregado devido ao seguinte erro:"
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
msgstr ""
-"O arquivo do dispositivo de armazenamento ou da partição (<abbr title=\"por "
-"exemplo\">ex.</abbr> <code>/dev/sda1</code>)"
+"O arquivo do dispositivo de armazenamento ou da partição (ex: <code>/dev/"
+"sda1</code>)"
msgid ""
"The filesystem that was used to format the memory (<abbr title=\"for example"
msgid "The given network name is not unique"
msgstr "O nome de rede informado não é único"
-#, fuzzy
msgid ""
"The hardware is not multi-SSID capable and the existing configuration will "
"be replaced if you proceed."
msgid "The length of the IPv6 prefix in bits"
msgstr "O comprimento do prefixo IPv6 em bits"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr "O endereço IPv4 local sobre o qual o túnel será criado (opcional)."
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgstr "O protocolo selecionado necessita estar associado a um dispositivo"
msgid "The submitted security token is invalid or already expired!"
-msgstr ""
+msgstr "A chave eletrônica enviada é inválida ou já expirou!"
msgid ""
"The system is erasing the configuration partition now and will reboot itself "
"O sistema está apagando agora a partição da configuração e irá reiniciar "
"quando terminado."
-#, fuzzy
msgid ""
"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
"few minutes before you try to reconnect. It might be necessary to renew the "
"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
"AYIYA"
msgstr ""
+"O final do túnel está atrás de um NAT. Por padrão será desabilitado e "
+"somente se aplica a AYIYA"
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"'server=1.2.3.4' fordomain-specific or full upstream <abbr title=\"Domain "
"Name System\">DNS</abbr> servers."
msgstr ""
+"Este arquivo deve conter linhas como 'server=/domain/1.2.3.4' ou "
+"'server=1.2.3.4' para servidores <abbr title=\"Domain Name System/Sistema de "
+"Nomes de Domínios\">DNS</abbr> por domínio ou completos."
msgid ""
"This is a list of shell glob patterns for matching files and directories to "
"This is either the \"Update Key\" configured for the tunnel or the account "
"password if no update key has been configured"
msgstr ""
+"Isto é a \"Update Key\" configurada para o túnel ou a senha da cpnta se não "
+"tem uma \"Update Keu\" configurada"
msgid ""
"This is the content of /etc/rc.local. Insert your own commands here (in "
"\">DHCP</abbr> na rede local"
msgid "This is the plain username for logging into the account"
-msgstr ""
+msgstr "Este é o nome do usuário em para se autenticar na sua conta"
msgid ""
"This is the prefix routed to you by the tunnel broker for use by clients"
msgstr ""
+"Este é o prefixo roteado pelo agente do tunel para você usar com seus "
+"clientes"
msgid "This is the system crontab in which scheduled tasks can be defined."
msgstr "Este é o sistema de agendamento de tarefas."
"de segurança anterior."
msgid "Tone"
-msgstr ""
+msgstr "Tom"
msgid "Total Available"
msgstr "Total Disponível"
msgstr "Interface de Tunelamento"
msgid "Tunnel Link"
-msgstr ""
+msgstr "Enlace do túnel"
msgid "Tunnel broker protocol"
-msgstr ""
+msgstr "Protocolo do agente do túnel"
msgid "Tunnel setup server"
-msgstr ""
+msgstr "Servidor de configuração do túnel"
msgid "Tunnel type"
-msgstr ""
-
-msgid "Turbo Mode"
-msgstr "Modo Turbo"
+msgstr "Tipo de túnel"
msgid "Tx-Power"
msgstr "Potência de transmissão"
msgid "USB Device"
msgstr "Dispositivo USB"
+msgid "USB Ports"
+msgstr "Portas USB"
+
msgid "UUID"
msgstr "UUID"
msgid "Unavailable Seconds (UAS)"
msgstr ""
+"Segundos de indisponibilidade (<abbr title=\"Unavailable Seconds\">UAS</"
+"abbr>)"
msgid "Unknown"
msgstr "Desconhecido"
msgstr "Não gerenciado"
msgid "Unmount"
-msgstr ""
+msgstr "Desmontar"
msgid "Unsaved Changes"
msgstr "Alterações Não Salvas"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
"Envia uma imagem compatível do sistema para substituir o firmware em "
"execução. Marque \"Manter configurações\" para manter as configurações "
-"atuais (requer uma imagem OpenWrt compatível)."
+"atuais (requer uma imagem compatível)."
msgid "Upload archive..."
msgstr "Enviar arquivo..."
msgstr "Usar códigos de países ISO/IEC 3166 alpha2."
msgid "Use MTU on tunnel interface"
-msgstr "Use MTU na interface do túnel"
+msgstr ""
+"Use o <abbr title=\"Maximum Transmission Unit/Unidade Máxima de Transmissão"
+"\">MTU</abbr> na interface do túnel"
msgid "Use TTL on tunnel interface"
msgstr "Use TTL na interface do túnel"
msgid "Use as external overlay (/overlay)"
-msgstr ""
+msgstr "Use como uma sobreposição externa (/overlay)"
msgid "Use as root filesystem (/)"
-msgstr ""
+msgstr "Usar como o sistema de arquivos raiz (/)"
msgid "Use broadcast flag"
msgstr "Use a marcação de broadcast"
msgid "Use builtin IPv6-management"
-msgstr ""
+msgstr "Use o gerenciamento do IPv6 embarcado"
msgid "Use custom DNS servers"
msgstr "Use servidores DNS personalizados"
msgid "Used Key Slot"
msgstr "Posição da Chave Usada"
-msgid "User certificate (PEM encoded)"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
msgstr ""
+"Usado para dois diferentes propósitos: identificador do RADIUS NAS e do "
+"802.11r R0KH. Não necessário com o WPA(2)-PSK normal."
+
+msgid "User certificate (PEM encoded)"
+msgstr "Certificado do usuário (codificado em formato PEM)"
msgid "User key (PEM encoded)"
-msgstr ""
+msgstr "Chave do usuário (codificada em formato PEM)"
msgid "Username"
msgstr "Usuário"
msgstr "VC-Mux"
msgid "VDSL"
-msgstr ""
+msgstr "VDSL"
msgid "VLANs on %q"
msgstr "VLANs em %q"
msgstr "VLANs em %q (%s)"
msgid "VPN Local address"
-msgstr ""
+msgstr "Endereço Local da VPN"
msgid "VPN Local port"
-msgstr ""
+msgstr "Porta Local da VPN"
msgid "VPN Server"
msgstr "Servidor VPN"
msgid "VPN Server port"
-msgstr ""
+msgstr "Porta do Servidor VPN"
msgid "VPN Server's certificate SHA1 hash"
-msgstr ""
+msgstr "Resumo digital SHA1 do certificado do servidor VPN"
msgid "VPNC (CISCO 3000 (and others) VPN)"
-msgstr ""
+msgstr "VPNC (VPN do CISCO 3000 (e outros))"
msgid "Vendor"
-msgstr ""
+msgstr "Fabricante"
msgid "Vendor Class to send when requesting DHCP"
msgstr "Classe do fabricante para enviar quando requisitar o DHCP"
msgid "Verbose"
-msgstr ""
+msgstr "Detalhado"
msgid "Verbose logging by aiccu daemon"
-msgstr ""
+msgstr "Habilite registros detalhados do serviço AICCU"
msgid "Verify"
msgstr "Verificar"
msgid ""
"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
msgstr ""
+"Espere esta quantidade de segundos pela sincronia do NTP. Definindo como 0 "
+"desabilita a espera (opcional)"
msgid "Waiting for changes to be applied..."
msgstr "Esperando a aplicação das mudanças..."
msgstr "Esperando o término do comando..."
msgid "Waiting for device..."
-msgstr ""
+msgstr "Esperando pelo dispositivo..."
msgid "Warning"
msgstr "Atenção"
msgid "Warning: There are unsaved changes that will get lost on reboot!"
-msgstr ""
+msgstr "Atenção: Existem mudanças não salvas que serão perdidas ao reiniciar!"
msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
+msgstr "Se deve criar uma rota padrão IPv6 sobre o túnel"
msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
+msgstr "Se deve rotear somente pacotes de prefixos delegados"
msgid "Width"
-msgstr ""
+msgstr "Largura"
+
+msgid "WireGuard VPN"
+msgstr "VPN WireGuard"
msgid "Wireless"
msgstr "Rede sem fio"
msgstr "Escreva as requisições DNS para o servidor de registro (syslog)"
msgid "Write system log to file"
-msgstr ""
-
-msgid "XR Support"
-msgstr "Suporte a XR"
+msgstr "Escrever registo do sistema (log) no arquivo"
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"inacessível!</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
"Você precisa habilitar o JavaScript no seu navegador ou o LuCI não irá "
"funcionar corretamente."
"upgrade it to at least version 7 or use another browser like Firefox, Opera "
"or Safari."
msgstr ""
+"Seu Internet Explorer é muito velho para mostrar esta página corretamente. "
+"Por favor, atualiza para, ao menos, a versão 7 ou use outro navegador como o "
+"Firefox, Opera ou Safari."
msgid "any"
msgstr "qualquer"
msgid "auto"
msgstr "automático"
-#, fuzzy
msgid "automatic"
-msgstr "estático"
+msgstr "automático"
msgid "baseT"
msgstr "baseT"
msgstr "desativar"
msgid "disabled"
-msgstr ""
+msgstr "desabilitado"
msgid "expired"
msgstr "expirado"
msgstr "ocultar"
msgid "hybrid mode"
-msgstr ""
+msgstr "Modo Híbrido"
msgid "if target is a network"
msgstr "se o destino for uma rede"
"Arquivo local de <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr>"
msgid "minimum 1280, maximum 1480"
-msgstr ""
+msgstr "mínimo 1280, máximo 1480"
+
+msgid "minutes"
+msgstr "minutos"
msgid "navigation Navigation"
-msgstr ""
+msgstr "navegação Navegação"
# Is this yes/no or no like in no one?
msgid "no"
msgstr "nenhum"
msgid "not present"
-msgstr ""
+msgstr "não presente "
msgid "off"
msgstr "desligado"
msgstr "aberto"
msgid "overlay"
-msgstr ""
+msgstr "sobreposição"
msgid "relay mode"
-msgstr ""
+msgstr "modo retransmissor"
msgid "routed"
msgstr "roteado"
msgid "server mode"
-msgstr ""
+msgstr "modo servidor"
msgid "skiplink1 Skip to navigation"
-msgstr ""
+msgstr "skiplink1 Pular para a navegação"
msgid "skiplink2 Skip to content"
-msgstr ""
+msgstr "skiplink2 Pular para o conteúdo"
msgid "stateful-only"
-msgstr ""
+msgstr "somente com estado"
msgid "stateless"
-msgstr ""
+msgstr "sem estado"
msgid "stateless + stateful"
-msgstr ""
+msgstr "sem estado + com estado"
msgid "tagged"
msgstr "etiquetado"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr "unidades de tempo (TUs / 1.024 ms) [1000-65535]"
+
msgid "unknown"
msgstr "desconhecido"
msgid "« Back"
msgstr "« Voltar"
+#~ msgid "AR Support"
+#~ msgstr "Suporte AR"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Controlador Wireless Atheros 802.11%s"
+
+#~ msgid "Background Scan"
+#~ msgstr "Busca em Segundo Plano"
+
+#~ msgid "Compression"
+#~ msgstr "Compressão"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Desativar temporizador de Beacon de Hardware"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Não enviar respostas de exames"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Quadros Rápidos"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Taxa Máxima"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Taxa Mínima"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Taxa de Multicast"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Canais para externo"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Domínio Regulatório"
+
+#~ msgid "Separate WDS"
+#~ msgstr "Separar WDS"
+
+#~ msgid "Static WDS"
+#~ msgstr "WDS Estático"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Modo Turbo"
+
+#~ msgid "XR Support"
+#~ msgstr "Suporte a XR"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "Uma rede adicional será criada se você deixar isto desmarcado."
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Carga de 1 Minuto:"
msgid "15 Minute Load:"
msgstr "Carga de 15 minutos:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "Carga 5 Minutos:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr ""
"<abbr title=\"Identificador de Conjunto Básico de Serviços\">BSSID</abbr>"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "Suporte AR"
-
msgid "ARP retry threshold"
msgstr "Limiar de tentativas ARP"
msgstr ""
"Permitir respostas a montante na gama 127.0.0.1/8, p.e. para serviços RBL"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Estações Associadas"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Controlador Wireless Atheros 802.11%s"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Autenticação"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Autoritário"
msgid "Back to scan results"
msgstr "Voltar aos resultados do scan"
-msgid "Background Scan"
-msgstr "Procurar em Segundo Plano"
-
msgid "Backup / Flash Firmware"
msgstr "Backup / Flashar Firmware"
"configuração alterados e marcados pelo opkg, ficheiros base essenciais e "
"padrões de backup definidos pelo utilizador."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Taxa de bits"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Checksum"
msgid "Common Configuration"
msgstr "Configuração comum"
-msgid "Compression"
-msgstr "Compressão"
-
msgid "Configuration"
msgstr "Configuração"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Desativar temporizador de HW-Beacon"
-
msgid "Disabled"
msgstr "Desativado"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "Descartar respostas RFC1918 a montante"
msgid "Do not forward reverse lookups for local networks"
msgstr "Não encaminhar lookups reversos para as redes locais"
-msgid "Do not send probe responses"
-msgstr "Não enviar respostas a sondas"
-
msgid "Domain required"
msgstr "Requerer domínio"
msgid "Domain whitelist"
msgstr "Lista Branca do Dominio"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr "Ativar a atualização dinâmica de ponto final HE.net"
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "Ativar a negociação IPv6 no link PPP"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "Ativar este mount"
msgid "Enabled"
msgstr "Ativado"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "Ativa o Spanning Tree nesta bridge"
msgid "Encryption"
msgstr "Encriptação"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "A apagar..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr "Servidor externo de logs de sistema"
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Frames Rápidas"
-
msgid "File"
msgstr "Ficheiro"
msgid "Firewall"
msgstr "Firewall"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Definições da Firewall"
msgid "Free space"
msgstr "Espaço livre"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "GHz"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "Handler"
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "Endereço IP"
msgid "IPv4-Address"
msgstr "Endereço-IPv4"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr "Endereço-IPv6"
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6-em-IPv4 (RFC4213)"
"A imagem que está a tentar carregar aparenta não caber na flash do "
"equipamento. Por favor verifique o ficheiro de imagem."
-msgid "Java Script required!"
-msgstr "É necessário Javascript!"
+msgid "JavaScript required!"
+msgstr "É necessário JavaScript!"
msgid "Join Network"
msgstr "Associar Rede"
"Lista de servidores <abbr title=\"Sistema Nomes de Domínio\">DNS</abbr> para "
"onde encaminhar os pedidos"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
"Escutar apenas na interface fornecida ou, se não especificada, em todas"
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Taxa Máxima"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr "Número máximo permitido de concessões DHCP ativas"
msgid "Metric"
msgstr "Métrica"
-msgid "Minimum Rate"
-msgstr "Taxa Mínima"
-
msgid "Minimum hold time"
msgstr "Tempo de retenção mínimo"
msgid "Missing protocol extension for proto %q"
msgstr "Falta a extensão de protocolo para o protocolo %q"
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Modo"
msgid "Move up"
msgstr "Descer"
-msgid "Multicast Rate"
-msgstr "Taxa de Multicast"
-
msgid "Multicast address"
msgstr "Endereço de multicast"
msgid "Option removed"
msgstr "Opção removida"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Opções"
msgid "Outbound:"
msgstr "Saída:"
-msgid "Outdoor Channels"
-msgstr "Canais de Outdoor"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr ""
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr "PIN"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP"
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "Executar reset"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr ""
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Controlador Wireless Prism2/2.5/3 802.11b"
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Proceder"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Pseudo Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr "Qualidade"
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr "Wireless em Tempo Real"
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr "Religar protecção"
msgid "Receiver Antenna"
msgstr "Antena de Recepção"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "Reconetar esta interface"
msgid "References"
msgstr "Referências"
-msgid "Regulatory Domain"
-msgstr "Domínio Regulatório"
-
msgid "Relay"
msgstr ""
msgid "Remote IPv4 address"
msgstr "Endereço IPv4 remoto"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Remover"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "Necessário para certos ISPs, p.ex. Charter with DOCSIS 3"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Isolar Clientes"
-msgid "Separate WDS"
-msgstr "Separar WDS"
-
msgid "Server Settings"
msgstr ""
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
msgid "Sort"
"dead"
msgstr ""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr ""
msgid "Static Routes"
msgstr "Rotas Estáticas"
-msgid "Static WDS"
-msgstr "WDS Estático"
-
msgid "Static address"
msgstr "Endereço estático"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
"O prefixo IPv6 atribuído ao provider, habitualmente termina com <code>::</"
msgid "The length of the IPv6 prefix in bits"
msgstr "O comprimento do prefixo IPv6 em bits"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Modo Turbo"
-
msgid "Tx-Power"
msgstr "Potência de Tx"
msgid "USB Device"
msgstr "Dispositivo USB"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "UUID"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
msgid "Upload archive..."
msgid "Used Key Slot"
msgstr ""
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "Rede Wireless"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "Suporte XR"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"inacessível!</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
-"Tem de activar o Java Script no seu browser ou a LuCI não funcionará "
+"Tem de activar o JavaScript no seu browser ou a LuCI não funcionará "
"corretamente."
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr ""
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "desconhecido"
msgid "« Back"
msgstr "« Voltar"
+#~ msgid "AR Support"
+#~ msgstr "Suporte AR"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Controlador Wireless Atheros 802.11%s"
+
+#~ msgid "Background Scan"
+#~ msgstr "Procurar em Segundo Plano"
+
+#~ msgid "Compression"
+#~ msgstr "Compressão"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Desativar temporizador de HW-Beacon"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Não enviar respostas a sondas"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Frames Rápidas"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Taxa Máxima"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Taxa Mínima"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Taxa de Multicast"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Canais de Outdoor"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Domínio Regulatório"
+
+#~ msgid "Separate WDS"
+#~ msgstr "Separar WDS"
+
+#~ msgid "Static WDS"
+#~ msgstr "WDS Estático"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Modo Turbo"
+
+#~ msgid "XR Support"
+#~ msgstr "Suporte XR"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "Uma rede adicional será criada se deixar isto desmarcado."
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Incarcarea in ultimul minut"
msgid "15 Minute Load:"
msgstr "Incarcarea in ultimele 15 minute"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "Incarcarea in ultimele 5 minute"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "Suport AR"
-
msgid "ARP retry threshold"
msgstr "ARP prag reincercare"
msgstr ""
"Permite raspuns upstream in plaja 127.0.0.0/8, e.g. pentru serviciile RBL"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Statiile asociate"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Atheros 802.11%s Controler Fara Fir"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Autentificare"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Autoritare"
msgid "Back to scan results"
msgstr "Inapoi la rezultatele scanarii"
-msgid "Background Scan"
-msgstr "Scanare in fundal"
-
msgid "Backup / Flash Firmware"
msgstr "Salveaza / Scrie Firmware"
"defined backup patterns."
msgstr ""
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Bitrate"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Suma de verificare"
msgid "Common Configuration"
msgstr "Configurarea obisnuita"
-msgid "Compression"
-msgstr "Comprimare"
-
msgid "Configuration"
msgstr "Configurare"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr ""
-
msgid "Disabled"
msgstr "Dezactivat"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr ""
msgid "Do not forward reverse lookups for local networks"
msgstr ""
-msgid "Do not send probe responses"
-msgstr ""
-
msgid "Domain required"
msgstr "Domeniul necesar"
msgid "Domain whitelist"
msgstr ""
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr ""
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr ""
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr ""
msgid "Enabled"
msgstr "Activat"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr ""
msgid "Encryption"
msgstr "Criptare"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "Stergere..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr "Server de log-uri extern"
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr ""
-
msgid "File"
msgstr "Fisier"
msgid "Firewall"
msgstr "Firewall"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Setarile firewall-ului"
msgid "Free space"
msgstr "Spatiu liber"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr ""
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr ""
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "Adresa IP"
msgid "IPv4-Address"
msgstr "Adresa IPv4"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr ""
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr ""
"Se pare ca ai incercat sa rescrii o imagine care nu are loc in memoria "
"flash, verifica fisierul din nou!"
-msgid "Java Script required!"
-msgstr "Ai nevoie de Java Script !"
+msgid "JavaScript required!"
+msgstr "Ai nevoie de JavaScript !"
msgid "Join Network"
msgstr ""
"requests to"
msgstr ""
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Rata maxima"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr ""
msgid "Metric"
msgstr "Metrica"
-msgid "Minimum Rate"
-msgstr "Rata minima"
-
msgid "Minimum hold time"
msgstr ""
msgid "Missing protocol extension for proto %q"
msgstr ""
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Mod"
msgid "Move up"
msgstr ""
-msgid "Multicast Rate"
-msgstr "Rata de multicast"
-
msgid "Multicast address"
msgstr ""
msgid "Option removed"
msgstr "Optiunea eliminata"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Optiuni"
msgid "Outbound:"
msgstr ""
-msgid "Outdoor Channels"
-msgstr ""
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr ""
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr ""
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr ""
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "Reseteaza"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr "Rata phy:"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr ""
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Continua"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr ""
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr "Calitate"
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr ""
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr ""
msgid "Receiver Antenna"
msgstr "Antena receptorului"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "Reconecteaza aceasta interfata"
msgid "References"
msgstr "Referinte"
-msgid "Regulatory Domain"
-msgstr "Domeniu regulatoriu"
-
msgid "Relay"
msgstr ""
msgid "Remote IPv4 address"
msgstr ""
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Elimina"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr ""
-msgid "Separate WDS"
-msgstr ""
-
msgid "Server Settings"
msgstr "Setarile serverului"
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
msgid "Sort"
"dead"
msgstr ""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr ""
msgid "Static Routes"
msgstr "Rute statice"
-msgid "Static WDS"
-msgstr ""
-
msgid "Static address"
msgstr ""
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
msgid "The length of the IPv6 prefix in bits"
msgstr ""
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Mod turbo"
-
msgid "Tx-Power"
msgstr "Puterea TX"
msgid "USB Device"
msgstr "Dispozitiv USB"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "UUID"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
msgid "Upload archive..."
msgid "Used Key Slot"
msgstr "Slot de cheie folosit"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "Wireless"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "Suport XR"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
msgstr ""
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "etichetat"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "necunoscut"
msgid "« Back"
msgstr "« Inapoi"
+#~ msgid "AR Support"
+#~ msgstr "Suport AR"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Atheros 802.11%s Controler Fara Fir"
+
+#~ msgid "Background Scan"
+#~ msgstr "Scanare in fundal"
+
+#~ msgid "Compression"
+#~ msgstr "Comprimare"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Rata maxima"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Rata minima"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Rata de multicast"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Domeniu regulatoriu"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Mod turbo"
+
+#~ msgid "XR Support"
+#~ msgstr "Suport XR"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr ""
#~ "Daca lasati aceasta optiune neselectata va fi creata o retea aditionala"
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Загрузка за 1 минуту:"
msgid "15 Minute Load:"
msgstr "Загрузка за 15 минут:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "Загрузка за 5 минут:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Базовый идентификатор обслуживания\">BSSID</abbr>"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "Поддержка AR"
-
msgid "ARP retry threshold"
msgstr "Порог повтора ARP"
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr "Разрешить ответы в диапазоне 127.0.0.0/8, например, для RBL-сервисов"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Подключенные клиенты"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Беспроводной 802.11%s контроллер Atheros"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Аутентификация"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Авторитетный"
msgid "Back to scan results"
msgstr "Назад к результатам сканирования"
-msgid "Background Scan"
-msgstr "Фоновое сканирование"
-
msgid "Backup / Flash Firmware"
msgstr "Резервная копия / прошивка"
"базовых файлов, а также шаблонов резервного копирования, определённых "
"пользователем."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Скорость"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Контрольная сумма"
msgid "Common Configuration"
msgstr "Общая конфигурация"
-msgid "Compression"
-msgstr "Сжатие"
-
msgid "Configuration"
msgstr "Конфигурация"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Отключить таймер HW-Beacon"
-
msgid "Disabled"
msgstr "Отключено"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "Отбрасывать ответы RFC1918"
msgid "Do not forward reverse lookups for local networks"
msgstr "Не перенаправлять обратные DNS-запросы для локальных сетей"
-msgid "Do not send probe responses"
-msgstr "Не посылать тестовые ответы"
-
msgid "Domain required"
msgstr "Требуется домен"
msgid "Domain whitelist"
msgstr "Белый список доменов"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr "Включить динамическое обновление оконечной точки HE.net"
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "Включить IPv6-согласование на PPP-соединении"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "Включить эту точку монтирования"
msgid "Enabled"
msgstr "Включено"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "Включает Spanning Tree Protocol на этом мосту"
msgid "Encryption"
msgstr "Шифрование"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "Стирание..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr "Сервер системного журнала"
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Быстрые кадры"
-
msgid "File"
msgstr "Файл"
msgid "Firewall"
msgstr "Межсетевой экран"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Настройки межсетевого экрана"
msgid "Free space"
msgstr "Свободное место"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "ГГц"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "Обработчик"
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "IP-адрес"
msgid "IPv4-Address"
msgstr "IPv4-адрес"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr "IPv6-адрес"
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6 в IPv4 (RFC4213)"
"Вы пытаетесь обновить прошивку файлом, который не помещается в память "
"устройства! Пожалуйста, проверьте файл образа."
-msgid "Java Script required!"
-msgstr "Требуется Java Script!"
+msgid "JavaScript required!"
+msgstr "Требуется JavaScript!"
msgid "Join Network"
msgstr "Подключение к сети"
"Список <abbr title=\"Domain Name System\">DNS</abbr>-серверов для "
"перенаправления запросов"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr "Слушать только на данном интерфейсе или, если не определено, на всех"
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Максимальная скорость"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr "Максимальное количество активных арендованных DHCP-адресов"
msgid "Metric"
msgstr "Метрика"
-msgid "Minimum Rate"
-msgstr "Минимальная скорость"
-
msgid "Minimum hold time"
msgstr "Минимальное время удержания"
msgid "Missing protocol extension for proto %q"
msgstr "Отсутствует расширение протокола %q"
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Режим"
msgid "Move up"
msgstr "Переместить вверх"
-msgid "Multicast Rate"
-msgstr "Скорость групповой передачи"
-
msgid "Multicast address"
msgstr "Адрес групповой передачи"
msgid "Option removed"
msgstr "Опция удалена"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Опции"
msgid "Outbound:"
msgstr "Исходящий:"
-msgid "Outdoor Channels"
-msgstr "Внешние каналы"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr "Назначить MTU"
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr "PIN"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP"
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "Выполнить сброс"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr "Скорость:"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Беспроводной 802.11b контроллер Prism2/2.5/3"
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Продолжить"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Псевдо Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr "Качество"
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr "Беспроводная сеть в реальном времени"
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr "Защита от DNS Rebinding"
msgid "Receiver Antenna"
msgstr "Приёмная антенна"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "Переподключить этот интерфейс"
msgid "References"
msgstr "Ссылки"
-msgid "Regulatory Domain"
-msgstr "Нормативная зона"
-
msgid "Relay"
msgstr "Ретранслятор"
msgid "Remote IPv4 address"
msgstr "Удалённый IPv4-адрес"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Удалить"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "Требуется для некоторых интернет-провайдеров"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Разделять клиентов"
-msgid "Separate WDS"
-msgstr "Отдельный WDS"
-
msgid "Server Settings"
msgstr "Настройки сервера"
msgid "Sorry, the server encountered an unexpected error."
msgstr "Извините, сервер столкнулся с неожиданной ошибкой."
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
"К сожалению, автоматическое обновление не поддерживается, новая прошивка "
-"должна быть установлена вручную. Обратитесь к вики OpenWrt для получения "
-"конкÑ\80еÑ\82нÑ\8bÑ\85 инÑ\81Ñ\82Ñ\80Ñ\83кÑ\86ий длÑ\8f ваÑ\88его Ñ\83Ñ\81Ñ\82Ñ\80ойÑ\81Ñ\82ва."
+"должна быть установлена вручную. Обратитесь к вики для получения конкретных "
+"инструкций для вашего устройства."
msgid "Sort"
msgstr "Сортировка"
msgstr ""
"Максимальное количество секунд, после которого узлы считаются отключенными"
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "Укажите закрытый ключ."
msgid "Static Routes"
msgstr "Статические маршруты"
-msgid "Static WDS"
-msgstr "Статический WDS"
-
msgid "Static address"
msgstr "Статический адрес"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
"Назначенный провайдеру префикс IPv6, обычно заканчивается на <code>::</code>"
msgid "The length of the IPv6 prefix in bits"
msgstr "Длина префикса IPv6 в битах"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Турбо-режим"
-
msgid "Tx-Power"
msgstr "Мощность передатчика"
msgid "USB Device"
msgstr "USB-устройство"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "UUID"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
"Загрузите sysupgrade-совместимый образ, чтобы заменить текущую прошивку. "
"Установите флажок \"Сохранить настройки\", чтобы сохранить текущую "
-"конфигурацию (требуется совместимый с OpenWrt образ прошивки)."
+"конфигурацию (требуется совместимый образ прошивки)."
msgid "Upload archive..."
msgstr "Загрузить архив..."
msgid "Used Key Slot"
msgstr "Используемый слот ключа"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "Wi-Fi"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "Поддержка XR"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"(например \"network\"), ваше устройство может оказаться недоступным!</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
-"Вам необходимо включить Java Script в вашем браузере для корректной работы "
+"Вам необходимо включить JavaScript в вашем браузере для корректной работы "
"LuCI."
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "с тегом"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "неизвестный"
msgid "« Back"
msgstr "« Назад"
+#~ msgid "AR Support"
+#~ msgstr "Поддержка AR"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Беспроводной 802.11%s контроллер Atheros"
+
+#~ msgid "Background Scan"
+#~ msgstr "Фоновое сканирование"
+
+#~ msgid "Compression"
+#~ msgstr "Сжатие"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Отключить таймер HW-Beacon"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Не посылать тестовые ответы"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Быстрые кадры"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Максимальная скорость"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Минимальная скорость"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Скорость групповой передачи"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Внешние каналы"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Нормативная зона"
+
+#~ msgid "Separate WDS"
+#~ msgstr "Отдельный WDS"
+
+#~ msgid "Static WDS"
+#~ msgstr "Статический WDS"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Турбо-режим"
+
+#~ msgid "XR Support"
+#~ msgstr "Поддержка XR"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr ""
#~ "Если вы не выберите эту опцию, то будет создана дополнительная сеть."
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr ""
msgid "15 Minute Load:"
msgstr ""
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr ""
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr ""
msgid "APN"
msgstr ""
-msgid "AR Support"
-msgstr ""
-
msgid "ARP retry threshold"
msgstr ""
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr ""
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr ""
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr ""
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr ""
msgid "Back to scan results"
msgstr ""
-msgid "Background Scan"
-msgstr ""
-
msgid "Backup / Flash Firmware"
msgstr ""
"defined backup patterns."
msgstr ""
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr ""
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr ""
msgid "Common Configuration"
msgstr ""
-msgid "Compression"
-msgstr ""
-
msgid "Configuration"
msgstr ""
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
+msgid "Disabled"
msgstr ""
-msgid "Disabled"
+msgid "Disabled (default)"
msgstr ""
msgid "Discard upstream RFC1918 responses"
msgid "Do not forward reverse lookups for local networks"
msgstr ""
-msgid "Do not send probe responses"
-msgstr ""
-
msgid "Domain required"
msgstr ""
msgid "Domain whitelist"
msgstr ""
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr ""
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr ""
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr ""
msgid "Enabled"
msgstr ""
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr ""
msgid "Encryption"
msgstr ""
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr ""
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr ""
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr ""
-
msgid "File"
msgstr ""
msgid "Firewall"
msgstr ""
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr ""
msgid "Free space"
msgstr ""
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr ""
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr ""
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr ""
msgid "IPv4-Address"
msgstr ""
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr ""
msgid "IPv6-Address"
msgstr ""
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr ""
"flash memory, please verify the image file!"
msgstr ""
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr ""
msgid "Join Network"
"requests to"
msgstr ""
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr ""
-
msgid "Maximum allowed number of active DHCP leases"
msgstr ""
msgid "Metric"
msgstr ""
-msgid "Minimum Rate"
-msgstr ""
-
msgid "Minimum hold time"
msgstr ""
msgid "Missing protocol extension for proto %q"
msgstr ""
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr ""
msgid "Move up"
msgstr ""
-msgid "Multicast Rate"
-msgstr ""
-
msgid "Multicast address"
msgstr ""
msgid "Option removed"
msgstr ""
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr ""
msgid "Outbound:"
msgstr ""
-msgid "Outdoor Channels"
-msgstr ""
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr ""
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr ""
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr ""
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr ""
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr ""
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr ""
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr ""
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr ""
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr ""
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr ""
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr ""
msgid "Receiver Antenna"
msgstr ""
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr ""
msgid "References"
msgstr ""
-msgid "Regulatory Domain"
-msgstr ""
-
msgid "Relay"
msgstr ""
msgid "Remote IPv4 address"
msgstr ""
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr ""
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr ""
-msgid "Separate WDS"
-msgstr ""
-
msgid "Server Settings"
msgstr ""
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
msgid "Sort"
"dead"
msgstr ""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr ""
msgid "Static Routes"
msgstr ""
-msgid "Static WDS"
-msgstr ""
-
msgid "Static address"
msgstr ""
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
msgid "The length of the IPv6 prefix in bits"
msgstr ""
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr ""
-
msgid "Tx-Power"
msgstr ""
msgid "USB Device"
msgstr ""
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr ""
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
msgid "Upload archive..."
msgid "Used Key Slot"
msgstr ""
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr ""
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr ""
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
msgstr ""
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr ""
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr ""
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Belastning senaste minuten:"
msgid "15 Minute Load:"
msgstr "Belastning senaste 15 minutrarna:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "Belastning senaste 5 minutrarna:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "APN"
msgstr ""
-msgid "AR Support"
-msgstr ""
-
msgid "ARP retry threshold"
msgstr ""
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr ""
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr ""
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr ""
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr ""
msgid "Back to scan results"
msgstr ""
-msgid "Background Scan"
-msgstr ""
-
msgid "Backup / Flash Firmware"
msgstr ""
"defined backup patterns."
msgstr ""
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr ""
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr ""
msgid "Common Configuration"
msgstr ""
-msgid "Compression"
-msgstr ""
-
msgid "Configuration"
msgstr ""
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
+msgid "Disabled"
msgstr ""
-msgid "Disabled"
+msgid "Disabled (default)"
msgstr ""
msgid "Discard upstream RFC1918 responses"
msgid "Do not forward reverse lookups for local networks"
msgstr ""
-msgid "Do not send probe responses"
-msgstr ""
-
msgid "Domain required"
msgstr ""
msgid "Domain whitelist"
msgstr ""
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr ""
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr ""
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr ""
msgid "Enabled"
msgstr ""
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr ""
msgid "Encryption"
msgstr ""
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr ""
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr ""
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr ""
-
msgid "File"
msgstr ""
msgid "Firewall"
msgstr ""
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr ""
msgid "Free space"
msgstr ""
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr ""
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr ""
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr ""
msgid "IPv4-Address"
msgstr ""
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr ""
msgid "IPv6-Address"
msgstr ""
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr ""
"flash memory, please verify the image file!"
msgstr ""
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr ""
msgid "Join Network"
"requests to"
msgstr ""
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr ""
-
msgid "Maximum allowed number of active DHCP leases"
msgstr ""
msgid "Metric"
msgstr ""
-msgid "Minimum Rate"
-msgstr ""
-
msgid "Minimum hold time"
msgstr ""
msgid "Missing protocol extension for proto %q"
msgstr ""
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr ""
msgid "Move up"
msgstr ""
-msgid "Multicast Rate"
-msgstr ""
-
msgid "Multicast address"
msgstr ""
msgid "Option removed"
msgstr ""
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr ""
msgid "Outbound:"
msgstr ""
-msgid "Outdoor Channels"
-msgstr ""
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr ""
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr ""
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr ""
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr ""
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr ""
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr ""
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr ""
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr ""
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr ""
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr ""
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr ""
msgid "Receiver Antenna"
msgstr ""
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr ""
msgid "References"
msgstr ""
-msgid "Regulatory Domain"
-msgstr ""
-
msgid "Relay"
msgstr ""
msgid "Remote IPv4 address"
msgstr ""
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr ""
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr ""
-msgid "Separate WDS"
-msgstr ""
-
msgid "Server Settings"
msgstr ""
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
msgid "Sort"
"dead"
msgstr ""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr ""
msgid "Static Routes"
msgstr ""
-msgid "Static WDS"
-msgstr ""
-
msgid "Static address"
msgstr ""
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
msgid "The length of the IPv6 prefix in bits"
msgstr ""
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr ""
-
msgid "Tx-Power"
msgstr ""
msgid "USB Device"
msgstr ""
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr ""
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
msgid "Upload archive..."
msgid "Used Key Slot"
msgstr ""
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr ""
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr ""
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
msgstr ""
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr ""
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr ""
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr ""
msgid "15 Minute Load:"
msgstr ""
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr ""
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr ""
msgid "APN"
msgstr ""
-msgid "AR Support"
-msgstr ""
-
msgid "ARP retry threshold"
msgstr ""
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr ""
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr ""
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr ""
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr ""
msgid "Back to scan results"
msgstr ""
-msgid "Background Scan"
-msgstr ""
-
msgid "Backup / Flash Firmware"
msgstr ""
"defined backup patterns."
msgstr ""
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr ""
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr ""
msgid "Common Configuration"
msgstr ""
-msgid "Compression"
-msgstr ""
-
msgid "Configuration"
msgstr ""
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
+msgid "Disabled"
msgstr ""
-msgid "Disabled"
+msgid "Disabled (default)"
msgstr ""
msgid "Discard upstream RFC1918 responses"
msgid "Do not forward reverse lookups for local networks"
msgstr ""
-msgid "Do not send probe responses"
-msgstr ""
-
msgid "Domain required"
msgstr ""
msgid "Domain whitelist"
msgstr ""
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr ""
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr ""
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr ""
msgid "Enabled"
msgstr ""
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr ""
msgid "Encryption"
msgstr ""
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr ""
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr ""
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr ""
-
msgid "File"
msgstr ""
msgid "Firewall"
msgstr ""
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr ""
msgid "Free space"
msgstr ""
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr ""
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr ""
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr ""
msgid "IPv4-Address"
msgstr ""
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr ""
msgid "IPv6-Address"
msgstr ""
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr ""
"flash memory, please verify the image file!"
msgstr ""
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr ""
msgid "Join Network"
"requests to"
msgstr ""
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr ""
-
msgid "Maximum allowed number of active DHCP leases"
msgstr ""
msgid "Metric"
msgstr ""
-msgid "Minimum Rate"
-msgstr ""
-
msgid "Minimum hold time"
msgstr ""
msgid "Missing protocol extension for proto %q"
msgstr ""
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr ""
msgid "Move up"
msgstr ""
-msgid "Multicast Rate"
-msgstr ""
-
msgid "Multicast address"
msgstr ""
msgid "Option removed"
msgstr ""
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr ""
msgid "Outbound:"
msgstr ""
-msgid "Outdoor Channels"
-msgstr ""
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr ""
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr ""
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr ""
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr ""
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr ""
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr ""
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr ""
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr ""
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr ""
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr ""
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr ""
msgid "Receiver Antenna"
msgstr ""
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr ""
msgid "References"
msgstr ""
-msgid "Regulatory Domain"
-msgstr ""
-
msgid "Relay"
msgstr ""
msgid "Remote IPv4 address"
msgstr ""
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr ""
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr ""
-msgid "Separate WDS"
-msgstr ""
-
msgid "Server Settings"
msgstr ""
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
msgid "Sort"
"dead"
msgstr ""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr ""
msgid "Static Routes"
msgstr ""
-msgid "Static WDS"
-msgstr ""
-
msgid "Static address"
msgstr ""
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
msgid "The length of the IPv6 prefix in bits"
msgstr ""
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr ""
-
msgid "Tx-Power"
msgstr ""
msgid "USB Device"
msgstr ""
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr ""
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
msgid "Upload archive..."
msgid "Used Key Slot"
msgstr ""
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr ""
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr ""
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
msgstr ""
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr ""
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr ""
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "1 Dakikalık Yük:"
msgid "15 Minute Load:"
msgstr "15 Dakikalık Yük:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "5 Dakikalık Yük:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\\\"Temel Servis Ayar Tanımlayıcısı\\\"> BSSID </abbr>"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "AR Desteği"
-
msgid "ARP retry threshold"
msgstr "ARP yenileme aralığı"
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr ""
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr ""
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Atheros 802.11%s Kablosuz Denetleyicisi"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Kimlik doğrulama"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Yetkilendirme"
msgid "Back to scan results"
msgstr "Tarama sonuçlarına dön"
-msgid "Background Scan"
-msgstr "Arka Planda Tarama"
-
msgid "Backup / Flash Firmware"
msgstr ""
"defined backup patterns."
msgstr ""
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr ""
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr ""
msgid "Common Configuration"
msgstr ""
-msgid "Compression"
-msgstr ""
-
msgid "Configuration"
msgstr ""
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
+msgid "Disabled"
msgstr ""
-msgid "Disabled"
+msgid "Disabled (default)"
msgstr ""
msgid "Discard upstream RFC1918 responses"
msgid "Do not forward reverse lookups for local networks"
msgstr ""
-msgid "Do not send probe responses"
-msgstr ""
-
msgid "Domain required"
msgstr ""
msgid "Domain whitelist"
msgstr ""
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr ""
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr ""
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr ""
msgid "Enabled"
msgstr ""
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr ""
msgid "Encryption"
msgstr ""
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr ""
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr ""
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr ""
-
msgid "File"
msgstr ""
msgid "Firewall"
msgstr ""
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr ""
msgid "Free space"
msgstr ""
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr ""
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr ""
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr ""
msgid "IPv4-Address"
msgstr ""
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr ""
msgid "IPv6-Address"
msgstr ""
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr ""
"flash memory, please verify the image file!"
msgstr ""
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr ""
msgid "Join Network"
"requests to"
msgstr ""
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr ""
-
msgid "Maximum allowed number of active DHCP leases"
msgstr ""
msgid "Metric"
msgstr ""
-msgid "Minimum Rate"
-msgstr ""
-
msgid "Minimum hold time"
msgstr ""
msgid "Missing protocol extension for proto %q"
msgstr ""
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr ""
msgid "Move up"
msgstr ""
-msgid "Multicast Rate"
-msgstr ""
-
msgid "Multicast address"
msgstr ""
msgid "Option removed"
msgstr ""
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr ""
msgid "Outbound:"
msgstr ""
-msgid "Outdoor Channels"
-msgstr ""
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr ""
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr ""
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr ""
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr ""
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr ""
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr ""
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr ""
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr ""
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr ""
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr ""
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr ""
msgid "Receiver Antenna"
msgstr ""
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr ""
msgid "References"
msgstr ""
-msgid "Regulatory Domain"
-msgstr ""
-
msgid "Relay"
msgstr ""
msgid "Remote IPv4 address"
msgstr ""
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr ""
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr ""
-msgid "Separate WDS"
-msgstr ""
-
msgid "Server Settings"
msgstr ""
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
msgid "Sort"
"dead"
msgstr ""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr ""
msgid "Static Routes"
msgstr ""
-msgid "Static WDS"
-msgstr ""
-
msgid "Static address"
msgstr ""
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
msgid "The length of the IPv6 prefix in bits"
msgstr ""
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr ""
-
msgid "Tx-Power"
msgstr ""
msgid "USB Device"
msgstr ""
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr ""
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
msgid "Upload archive..."
msgid "Used Key Slot"
msgstr ""
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr ""
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr ""
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
msgstr ""
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
"LuCI'nin düzgün çalışması için tarayıcınızda Java Scripti "
"etkinleştirmelisiniz."
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "etiketlendi"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr ""
msgid "« Back"
msgstr "« Geri"
+
+#~ msgid "AR Support"
+#~ msgstr "AR Desteği"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Atheros 802.11%s Kablosuz Denetleyicisi"
+
+#~ msgid "Background Scan"
+#~ msgstr "Arka Planda Tarama"
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "Навантаження за 1 хвилину:"
msgid "15 Minute Load:"
msgstr "Навантаження за 15 хвилин:"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "Навантаження за 5 хвилин:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr ""
"<abbr title=\"Basic Service Set Identifier — ідентифікатор основної служби "
msgstr ""
"<abbr title=\"Access Point Name — символічна назва точки доступу\">APN</abbr>"
-msgid "AR Support"
-msgstr "Підтримка AR"
-
msgid "ARP retry threshold"
msgstr "Поріг повтору ARP"
"Дозволити відповіді від клієнта на сервер у діапазоні 127.0.0.0/8, "
"наприклад, для RBL-послуг"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "Приєднані станції"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Бездротовий 802.11%s контролер Atheros"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Автентифікація"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Надійний"
msgid "Back to scan results"
msgstr "Повернутися до результатів сканування"
-msgid "Background Scan"
-msgstr "Сканування у фоновому режимі"
-
msgid "Backup / Flash Firmware"
msgstr "Резервне копіювання / Оновлення прошивки"
"складається із позначених opkg змінених файлів конфігурації, невідокремних "
"базових файлів, та файлів за користувацькими шаблонами резервного копіювання."
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "Швидкість передачі даних"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Контрольна сума"
msgid "Common Configuration"
msgstr "Загальна конфігурація"
-msgid "Compression"
-msgstr "Стиснення"
-
msgid "Configuration"
msgstr "Конфігурація"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Вимкнути таймер HW-Beacon"
-
msgid "Disabled"
msgstr "Вимкнено"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "Відкидати RFC1918-відповіді від клієнта на сервер"
msgid "Do not forward reverse lookups for local networks"
msgstr "Не спрямовувати зворотний перегляд для локальних мереж"
-msgid "Do not send probe responses"
-msgstr "Не надсилати відповіді на зондування"
-
msgid "Domain required"
msgstr "Потрібен домен"
msgid "Domain whitelist"
msgstr "\"Білий список\" доменів"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr "Увімкнути динамічне оновлення кінцевої точки HE.net"
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "Увімкнути узгодження IPv6 для PPP-з'єднань"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "Увімкнути це монтування"
msgid "Enabled"
msgstr "Увімкнено"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr ""
"Увімкнути <abbr title=\"Spanning Tree Protocol\">STP</abbr> на цьому мосту"
msgid "Encryption"
msgstr "Шифрування"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "Видалення..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr "Зовнішній сервер системного журналу"
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Швидкі фрейми"
-
msgid "File"
msgstr "Файл"
msgid "Firewall"
msgstr "Брандмауер"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "Настройки брандмауера"
msgid "Free space"
msgstr "Вільне місце"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "ГГц"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "Обробник"
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "IP-адреса"
msgid "IPv4-Address"
msgstr "IPv4-адреса"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr "IPv6-адреса"
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6 у IPv4 (RFC4213)"
"Схоже, що ви намагаєтеся залити образ, який не вміщається у флеш-пам'ять! "
"Перевірте файл образу!"
-msgid "Java Script required!"
-msgstr "Потрібен Java Script!"
+msgid "JavaScript required!"
+msgstr "Потрібен JavaScript!"
msgid "Join Network"
msgstr "Підключення до мережі"
"Список <abbr title=\"Domain Name System\">DNS</abbr>-серверів, до яких "
"пересилати запити"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
"Прослуховувати тільки на цьому інтерфейсі, або на всіх (якщо <em>не "
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Максимальна швидкість"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr "Максимально допустима кількість активних оренд DHCP"
msgid "Metric"
msgstr "Метрика"
-msgid "Minimum Rate"
-msgstr "Мінімальна швидкість"
-
msgid "Minimum hold time"
msgstr "Мінімальний час утримування"
msgid "Missing protocol extension for proto %q"
msgstr "Відсутні розширення для протоколу %q"
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Режим"
msgid "Move up"
msgstr "Вгору"
-msgid "Multicast Rate"
-msgstr "Швидкість багатоадресного потоку"
-
msgid "Multicast address"
msgstr "Адреса багатоадресного потоку"
msgid "Option removed"
msgstr "Опція видалена"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Опції"
msgid "Outbound:"
msgstr "Вихідний:"
-msgid "Outdoor Channels"
-msgstr "Зовнішні канали"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr "Перевизначити MTU"
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
"<abbr title=\"Personal Identification Number — Персональний ідентифікаційний "
"номер\">>PIN</abbr>"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP"
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "Відновити"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr "Фізична швидкість:"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Бездротовий 802.11b контролер Prism2/2.5/3"
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Продовжити"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Псевдо Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr "Якість"
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr "Бездротові мережі у реальному часі"
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr "Захист від переприв'язки"
msgid "Receiver Antenna"
msgstr "Антена приймача"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "Перепідключити цей інтерфейс"
msgid "References"
msgstr "Посилання"
-msgid "Regulatory Domain"
-msgstr "Регулятивний домен"
-
msgid "Relay"
msgstr "Ретранслятор"
msgid "Remote IPv4 address"
msgstr "Віддалена адреса IPv4"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Видалити"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "Потрібно для деяких провайдерів, наприклад, Charter із DOCSIS 3"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Розділяти клієнтів"
-msgid "Separate WDS"
-msgstr "Розділяти WDS"
-
msgid "Server Settings"
msgstr "Настройки сервера"
msgid "Sorry, the server encountered an unexpected error."
msgstr "На жаль, на сервері сталася неочікувана помилка."
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
"На жаль, автоматичне оновлення системи не підтримується. Новий образ "
-"прошивки повинен бути залитий вручну. Зверніться до OpenWrt Wiki за "
-"інструкцією з інсталяції для конкретного пристрою."
+"прошивки повинен бути залитий вручну. Зверніться до Wiki за інструкцією з "
+"інсталяції для конкретного пристрою."
msgid "Sort"
msgstr "Сортування"
"Визначає максимальний час (секунди), після якого вважається, що вузли "
"\"мертві\""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "Вкажіть тут секретний ключ шифрування."
msgid "Static Routes"
msgstr "Статичні маршрути"
-msgid "Static WDS"
-msgstr "Статичний WDS"
-
msgid "Static address"
msgstr "Статичні адреси"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
"Призначений провайдеру IPv6-префікс, зазвичай закінчується на <code>::</code>"
msgid "The length of the IPv6 prefix in bits"
msgstr "Довжина IPv6-префікса в бітах"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Режим Turbo"
-
msgid "Tx-Power"
msgstr "Потужність передавача"
msgid "USB Device"
msgstr "USB-пристрій"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "UUID"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
"Відвантажити sysupgrade-сумісний образ, щоб замінити поточну прошивку. Для "
"збереження поточної конфігурації встановіть прапорець \"Зберегти настройки"
-"\" (потрібен OpenWrt-сумісний образ прошивки)."
+"\" (потрібен сумісний образ прошивки)."
msgid "Upload archive..."
msgstr "Відвантажити архів..."
msgid "Used Key Slot"
msgstr "Використовується слот ключа"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "Бездротові мережі"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "Підтримка XR"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"пристрій може стати недоступним!</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
-"Ви повинні увімкнути Java Script у вашому браузері, або LuCI не буде "
+"Ви повинні увімкнути JavaScript у вашому браузері, або LuCI не буде "
"працювати належним чином."
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "з позначкою"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "невідомий"
msgid "« Back"
msgstr "« Назад"
+#~ msgid "AR Support"
+#~ msgstr "Підтримка AR"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Бездротовий 802.11%s контролер Atheros"
+
+#~ msgid "Background Scan"
+#~ msgstr "Сканування у фоновому режимі"
+
+#~ msgid "Compression"
+#~ msgstr "Стиснення"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Вимкнути таймер HW-Beacon"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Не надсилати відповіді на зондування"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Швидкі фрейми"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Максимальна швидкість"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Мінімальна швидкість"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Швидкість багатоадресного потоку"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Зовнішні канали"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Регулятивний домен"
+
+#~ msgid "Separate WDS"
+#~ msgstr "Розділяти WDS"
+
+#~ msgid "Static WDS"
+#~ msgstr "Статичний WDS"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Режим Turbo"
+
+#~ msgid "XR Support"
+#~ msgstr "Підтримка XR"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "Якщо ви залишите це невибраним, буде створена додаткова мережа."
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr ""
msgid "15 Minute Load:"
msgstr ""
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr ""
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Dịch vụ căn bản đặt Identifier\">BSSID</abbr>"
msgid "APN"
msgstr ""
-msgid "AR Support"
-msgstr "Hỗ trợ AR"
-
msgid "ARP retry threshold"
msgstr ""
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr ""
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr ""
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "Xác thực"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "Authoritative"
msgid "Back to scan results"
msgstr ""
-msgid "Background Scan"
-msgstr "Background Scan"
-
msgid "Backup / Flash Firmware"
msgstr ""
"defined backup patterns."
msgstr ""
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr ""
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "Checksum"
msgid "Common Configuration"
msgstr ""
-msgid "Compression"
-msgstr "Sức nén"
-
msgid "Configuration"
msgstr "Cấu hình"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "Vô hiệu hóa bộ chỉnh giờ HW-Beacon"
-
msgid "Disabled"
msgstr ""
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr ""
msgid "Do not forward reverse lookups for local networks"
msgstr ""
-msgid "Do not send probe responses"
-msgstr "Không gửi nhắc hồi đáp"
-
msgid "Domain required"
msgstr "Domain yêu cầu"
msgid "Domain whitelist"
msgstr ""
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr ""
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr ""
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr ""
msgid "Enabled"
msgstr ""
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "Kích hoạt Spanning Tree Protocol trên cầu nối này"
msgid "Encryption"
msgstr "Encryption"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr ""
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr ""
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "Khung nhanh"
-
msgid "File"
msgstr ""
msgid "Firewall"
msgstr "Firewall"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr ""
msgid "Free space"
msgstr ""
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr ""
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr ""
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "Địa chỉ IP"
msgid "IPv4-Address"
msgstr ""
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6"
msgid "IPv6-Address"
msgstr ""
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr ""
"Dường như bạn cố gắng flash một hình ảnh không phù hợp với bộ nhớ flash, xin "
"vui lòng xác minh các tập tin hình ảnh!"
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr ""
msgid "Join Network"
"requests to"
msgstr ""
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr ""
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "Mức cao nhất"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr ""
msgid "Metric"
msgstr "Metric"
-msgid "Minimum Rate"
-msgstr "Mức thấp nhất"
-
msgid "Minimum hold time"
msgstr "Mức thấp nhất"
msgid "Missing protocol extension for proto %q"
msgstr ""
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "Chế độ"
msgid "Move up"
msgstr ""
-msgid "Multicast Rate"
-msgstr "Multicast Rate"
-
msgid "Multicast address"
msgstr ""
msgid "Option removed"
msgstr ""
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "Lựa chọn "
msgid "Outbound:"
msgstr ""
-msgid "Outdoor Channels"
-msgstr "Kênh ngoại mạng"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr ""
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr ""
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr ""
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr ""
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr ""
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr ""
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "Proceed"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Pseudo Ad-Hoc (ahdemo)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr ""
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr ""
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr ""
msgid "Receiver Antenna"
msgstr "Máy thu Antenna"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr ""
msgid "References"
msgstr "Tham chiếu"
-msgid "Regulatory Domain"
-msgstr "Miền điều chỉnh"
-
msgid "Relay"
msgstr ""
msgid "Remote IPv4 address"
msgstr ""
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "Loại bỏ"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr ""
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "Cô lập đối tượng"
-msgid "Separate WDS"
-msgstr "Phân tách WDS"
-
msgid "Server Settings"
msgstr ""
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
msgid "Sort"
"dead"
msgstr ""
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr ""
msgid "Static Routes"
msgstr "Static Routes"
-msgid "Static WDS"
-msgstr ""
-
msgid "Static address"
msgstr ""
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr ""
msgid "The length of the IPv6 prefix in bits"
msgstr ""
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "Turbo Mode"
-
msgid "Tx-Power"
msgstr ""
msgid "USB Device"
msgstr ""
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr ""
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
msgid "Upload archive..."
msgid "Used Key Slot"
msgstr ""
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr ""
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "Hỗ trợ XR"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"bạn chó thể trở nên không truy cập được</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
+"You must enable JavaScript in your browser or LuCI will not work properly."
msgstr ""
msgid ""
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr ""
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr ""
msgid "« Back"
msgstr ""
+
+#~ msgid "AR Support"
+#~ msgstr "Hỗ trợ AR"
+
+#~ msgid "Background Scan"
+#~ msgstr "Background Scan"
+
+#~ msgid "Compression"
+#~ msgstr "Sức nén"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "Vô hiệu hóa bộ chỉnh giờ HW-Beacon"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "Không gửi nhắc hồi đáp"
+
+#~ msgid "Fast Frames"
+#~ msgstr "Khung nhanh"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "Mức cao nhất"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "Mức thấp nhất"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "Multicast Rate"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "Kênh ngoại mạng"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "Miền điều chỉnh"
+
+#~ msgid "Separate WDS"
+#~ msgstr "Phân tách WDS"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Turbo Mode"
+
+#~ msgid "XR Support"
+#~ msgstr "Hỗ trợ XR"
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-12-21 23:08+0200\n"
-"PO-Revision-Date: 2015-12-20 13:14+0800\n"
-"Last-Translator: GuoGuo <gch981213@gmail.com>\n"
+"PO-Revision-Date: 2017-01-07 21:46+0800\n"
+"Last-Translator: Hsing-Wang Liao <kuoruan@gmail.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Poedit 1.8.5\n"
+"X-Generator: Poedit 1.8.11\n"
"Language-Team: \n"
msgid "%s is untagged in multiple VLANs!"
-msgstr ""
+msgstr "%s 在多个 VLAN 中未标记"
msgid "(%d minute window, %d second interval)"
-msgstr "(%d分钟信息，%d秒刷新)"
+msgstr "(%d 分钟信息，%d 秒刷新)"
msgid "(%s available)"
msgstr "(%s 可用)"
msgid "-- match by label --"
msgstr "-- 根据标签匹配 --"
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "1分钟负载:"
msgid "15 Minute Load:"
msgstr "15分钟负载:"
-msgid "464XLAT (CLAT)"
+msgid "4-character hexadecimal ID"
msgstr ""
+msgid "464XLAT (CLAT)"
+msgstr "464XLAT (CLAT)"
+
msgid "5 Minute Load:"
msgstr "5分钟负载:"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
+msgstr "<abbr title=\"基本服务集标识符\">BSSID</abbr>"
msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> 查询端口"
+msgstr "<abbr title=\"域名服务系统\">DNS</abbr> 查询端口"
msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> 服务器端口"
+msgstr "<abbr title=\"域名服务系统\">DNS</abbr> 服务器端口"
msgid ""
"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
"order of the resolvfile"
-msgstr "将会按照指定的顺序查询<abbr title=\"Domain Name System\">DNS</abbr>"
+msgstr "将会按照指定的顺序查询<abbr title=\"域名服务系统\">DNS</abbr>"
msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
+msgstr "<abbr title=\"扩展服务集标识符\">ESSID</abbr>"
msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-地址"
+msgstr "<abbr title=\"互联网协议第4版\">IPv4</abbr>-地址"
msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-网关"
+msgstr "<abbr title=\"互联网协议第4版\">IPv4</abbr>-网关"
msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-子网掩码"
+msgstr "<abbr title=\"互联网协议第4版\">IPv4</abbr>-子网掩码"
msgid ""
"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
"(CIDR)"
msgstr ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-地址或超网() (<abbr "
-"title=\"无类别域间路由\">CIDR</abbr>)"
+"<abbr title=\"互联网协议第6版\">IPv6</abbr>-地址或超网(<abbr title=\"无类别域"
+"间路由\">CIDR</abbr>)"
msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-网关"
+msgstr "<abbr title=\"互联网协议第6版\">IPv6</abbr>-网关"
msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Suffix (hex)"
-msgstr ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-后缀（十六进制）"
+msgstr "<abbr title=\"互联网协议第6版\">IPv6</abbr>-后缀（十六进制）"
msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr>配置"
+msgstr "<abbr title=\"发光二极管\">LED</abbr>配置"
msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr>名称"
+msgstr "<abbr title=\"发光二极管\">LED</abbr>名称"
msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "<abbr title=\"Media Access Control\">MAC</abbr>-地址"
+msgstr "<abbr title=\"介质访问控制\">MAC</abbr>-地址"
msgid ""
"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"最大<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>分配数量"
+msgstr "最大<abbr title=\"动态主机配置协议\">DHCP</abbr>分配数量"
msgid ""
"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
"Domain Name System\">EDNS0</abbr> packet size"
-msgstr "最大<abbr title=\"DNS扩展名\">EDNS0</abbr>数据包大小"
+msgstr "最大<abbr title=\"DNS扩展名机制\">EDNS0</abbr>数据包大小"
msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "<abbr title=\"maximal\">最大</abbr>并发查询数"
+msgstr "最大并发查询数"
msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
msgstr "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
msgid "A43C + J43 + A43"
-msgstr ""
+msgstr "A43C + J43 + A43"
msgid "A43C + J43 + A43 + V43"
-msgstr ""
+msgstr "A43C + J43 + A43 + V43"
msgid "ADSL"
msgstr "ADSL"
msgid "AICCU (SIXXS)"
-msgstr ""
+msgstr "AICCU (SIXXS)"
msgid "ANSI T1.413"
-msgstr ""
+msgstr "ANSI T1.413"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "AR支持"
-
msgid "ARP retry threshold"
msgstr "ARP重试阈值"
msgid "ATM (Asynchronous Transfer Mode)"
-msgstr ""
+msgstr "ATM(异步传输模式)"
msgid "ATM Bridges"
msgstr "ATM桥接"
msgstr "ATM设备号码"
msgid "ATU-C System Vendor ID"
-msgstr ""
+msgstr "ATU-C系统供应商ID"
msgid "AYIYA"
-msgstr ""
+msgstr "AYIYA"
msgid "Access Concentrator"
msgstr "接入集中器"
msgstr "激活此网络"
msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr "活动的<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-链路"
+msgstr "活动的<abbr title=\"互联网协议第4版\">IPv4</abbr>-链路"
msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr "活动的<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-链路"
+msgstr "活动的<abbr title=\"互联网协议第6版\">IPv6</abbr>-链路"
msgid "Active Connections"
msgstr "活动连接"
msgstr "额外的HOSTS文件"
msgid "Additional servers file"
-msgstr ""
+msgstr "额外的SERVERS文件"
msgid "Address"
msgstr "地址"
msgstr "高级设置"
msgid "Aggregate Transmit Power(ACTATP)"
-msgstr ""
+msgstr "总发射功率(ACTATP)"
msgid "Alert"
msgstr "警戒"
msgid ""
"Allocate IP addresses sequentially, starting from the lowest available "
"address"
-msgstr ""
+msgstr "从最低可用地址开始顺序分配IP地址"
msgid "Allocate IP sequentially"
-msgstr ""
+msgstr "顺序分配IP"
msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr "允许<abbr title=\"Secure Shell\">SSH</abbr>密码验证"
+msgstr "允许<abbr title=\"安全外壳协议\">SSH</abbr>密码验证"
msgid "Allow all except listed"
msgstr "仅允许列表外"
msgstr "允许远程主机连接到本地SSH转发端口"
msgid "Allow root logins with password"
-msgstr "root权限登录"
+msgstr "允许root用户凭密码登录"
msgid "Allow the <em>root</em> user to login with password"
msgstr "允许<em>root</em>用户凭密码登录"
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr "允许127.0.0.0/8回环范围内的上行响应，例如：RBL服务"
+msgid "Allowed IPs"
+msgstr "允许的IP"
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgstr ""
"也请查看SIXXS上的<a href=\"https://www.sixxs.net/faq/connectivity/?"
-"faq=comparison\">Tunneling Comparison</a> "
+"faq=comparison\">隧道对比</a>"
msgid "Always announce default router"
msgstr "总是广播默认路由"
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
-msgstr ""
+msgstr "Annex"
msgid "Annex A + L + M (all)"
-msgstr ""
+msgstr "Annex A + L + M (全部)"
msgid "Annex A G.992.1"
-msgstr ""
+msgstr "Annex A G.992.1"
msgid "Annex A G.992.2"
-msgstr ""
+msgstr "Annex A G.992.2"
msgid "Annex A G.992.3"
-msgstr ""
+msgstr "Annex A G.992.3"
msgid "Annex A G.992.5"
-msgstr ""
+msgstr "Annex A G.992.5"
msgid "Annex B (all)"
-msgstr ""
+msgstr "Annex B (全部)"
msgid "Annex B G.992.1"
-msgstr ""
+msgstr "Annex B G.992.1"
msgid "Annex B G.992.3"
-msgstr ""
+msgstr "Annex B G.992.3"
msgid "Annex B G.992.5"
-msgstr ""
+msgstr "Annex B G.992.5"
msgid "Annex J (all)"
-msgstr ""
+msgstr "Annex J (全部)"
msgid "Annex L G.992.3 POTS 1"
-msgstr ""
+msgstr "Annex L G.992.3 POTS 1"
msgid "Annex M (all)"
-msgstr ""
+msgstr "Annex M (全部)"
msgid "Annex M G.992.3"
-msgstr ""
+msgstr "Annex M G.992.3"
msgid "Annex M G.992.5"
-msgstr ""
+msgstr "Annex M G.992.5"
msgid "Announce as default router even if no public prefix is available."
-msgstr "即使没有可用的公共前缀也广播默认路由"
+msgstr "即使没有可用的公共前缀也广播默认路由。"
msgid "Announced DNS domains"
msgstr "广播的DNS域名"
msgstr "广播的DNS服务器"
msgid "Anonymous Identity"
-msgstr ""
+msgstr "匿名身份"
msgid "Anonymous Mount"
msgstr "自动挂载未配置的磁盘分区"
msgid ""
"Assign prefix parts using this hexadecimal subprefix ID for this interface."
-msgstr ""
+msgstr "指定此接口使用的十六进制子ID前缀部分"
msgid "Associated Stations"
msgstr "已连接站点"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Qualcomm/Atheros 802.11%s 无线网卡"
-
msgid "Auth Group"
-msgstr ""
+msgstr "认证组"
msgid "AuthGroup"
msgstr "认证组"
msgid "Authentication"
msgstr "认证"
+msgid "Authentication Type"
+msgstr "认证类型"
+
msgid "Authoritative"
msgstr "授权的唯一DHCP服务器"
msgstr "在挂载前自动检查文件系统错误"
msgid "Automatically mount filesystems on hotplug"
-msgstr "通过hotplug自动挂载磁盘"
+msgstr "通过Hotplug自动挂载磁盘"
msgid "Automatically mount swap on hotplug"
-msgstr "通过hotplug自动挂载Swap分区"
+msgstr "通过Hotplug自动挂载Swap分区"
msgid "Automount Filesystem"
msgstr "自动挂载磁盘"
msgstr "平均:"
msgid "B43 + B43C"
-msgstr ""
+msgstr "B43 + B43C"
msgid "B43 + B43C + V43"
-msgstr ""
+msgstr "B43 + B43C + V43"
msgid "BR / DMR / AFTR"
-msgstr ""
+msgstr "BR / DMR / AFTR"
msgid "BSSID"
msgstr "BSSID"
msgid "Back to scan results"
msgstr "返回至扫描结果"
-msgid "Background Scan"
-msgstr "后台搜索"
-
msgid "Backup / Flash Firmware"
msgstr "备份/升级"
"下面是待备份的文件清单。包含了更改的配置文件、必要的基础文件和用户自定义的需"
"备份文件。"
+msgid "Bind interface"
+msgstr "绑定接口"
+
msgid "Bind only to specific interfaces rather than wildcard address."
-msgstr ""
+msgstr "仅绑定到特定接口，而不是全部地址。"
+
+msgid "Bind the tunnel to this interface (optional)."
+msgstr "将隧道绑定到此接口(可选)。"
msgid "Bitrate"
msgstr "传输速率"
msgstr "按键"
msgid "CA certificate; if empty it will be saved after the first connection."
-msgstr "CA证书.如果留空的话证书将在第一次连接时被保存."
+msgstr "CA证书，如果留空的话证书将在第一次连接时被保存。"
msgid "CPU usage (%)"
msgstr "CPU使用率(%)"
msgid "Check fileystems before mount"
msgstr "在挂载前检查文件系统"
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "校验值"
msgstr "算法"
msgid "Cisco UDP encapsulation"
-msgstr ""
+msgstr "Cisco UDP封装"
msgid ""
"Click \"Generate archive\" to download a tar archive of the current "
msgid "Common Configuration"
msgstr "一般设置"
-msgid "Compression"
-msgstr "压缩"
-
msgid "Configuration"
msgstr "配置"
msgid ""
"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
"\">LED</abbr>s if possible."
-msgstr "自定义<abbr title=\"Light Emitting Diode\">LED</abbr>的活动状态。"
+msgstr "自定义<abbr title=\"发光二极管\">LED</abbr>的活动状态。"
msgid "DHCP Leases"
msgstr "DHCP分配"
msgstr "DNS转发"
msgid "DNS-Label / FQDN"
-msgstr ""
+msgstr "DNS-Label / FQDN"
msgid "DNSSEC"
-msgstr ""
+msgstr "DNSSEC"
msgid "DNSSEC check unsigned"
-msgstr ""
+msgstr "DNSSEC未签名检查"
msgid "DPD Idle Timeout"
-msgstr ""
+msgstr "DPD空闲超时"
msgid "DS-Lite AFTR address"
-msgstr ""
+msgstr "DS-Lite AFTR地址"
msgid "DSL"
-msgstr ""
+msgstr "DSL"
msgid "DSL Status"
-msgstr ""
+msgstr "DSL状态"
msgid "DSL line mode"
-msgstr ""
+msgstr "DSL线路模式"
msgid "DUID"
-msgstr "DUID（DHCP唯一标识符）"
+msgstr "DUID (DHCP唯一标识符)"
msgid "Data Rate"
-msgstr ""
+msgstr "数据速率"
msgid "Debug"
msgstr "调试"
msgstr "默认网关"
msgid "Default is stateless + stateful"
-msgstr ""
+msgstr "默认是无状态 + 有状态"
msgid "Default route"
msgstr "默认路由"
msgid ""
"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
"this interface."
-msgstr ""
-"禁用本接口的<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>。"
+msgstr "禁用本接口的<abbr title=\"动态主机配置协议\">DHCP</abbr>。"
msgid "Disable DNS setup"
msgstr "停用DNS设定"
msgid "Disable Encryption"
-msgstr ""
-
-msgid "Disable HW-Beacon timer"
-msgstr "停用 HW-Beacon 计时器"
+msgstr "禁用加密"
msgid "Disabled"
msgstr "禁用"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "丢弃RFC1918上行响应数据"
msgid "Do not forward reverse lookups for local networks"
msgstr "不转发反向查询本地网络的Lookups命令"
-msgid "Do not send probe responses"
-msgstr "不回送探测响应"
-
msgid "Domain required"
msgstr "忽略空域名解析"
msgid "Domain whitelist"
msgstr "域名白名单"
+msgid "Don't Fragment"
+msgstr "禁止碎片"
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
msgstr ""
-"Dropbear提供了集成的<abbr title=\"
Secure Copy\">SCP</abbr>服务器和基于<abbr "
-"title=\"Secure Shell\">SSH</abbr>的shell访问"
+"Dropbear提供了集成的<abbr title=\"
安全复制\">SCP</abbr>服务器和基于<abbr "
+"title=\"安全外壳协议\">SSH</abbr>的Shell访问"
msgid "Dual-Stack Lite (RFC6333)"
-msgstr ""
+msgstr "Dual-Stack Lite (RFC6333)"
msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr "动态<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
+msgstr "动态<abbr title=\"动态主机配置协议\">DHCP</abbr>"
msgid "Dynamic tunnel"
msgstr "动态隧道"
msgstr "动态分配DHCP地址。如果禁用，则只能为静态租用表中的客户端提供网络服务。"
msgid "EA-bits length"
-msgstr ""
+msgstr "EA位长度"
msgid "EAP-Method"
-msgstr "EAP-Method"
+msgstr "EAP类型"
msgid "Edit"
msgstr "修改"
msgstr "启用"
msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "开启<abbr title=\"Spanning Tree Protocol\">STP</abbr>"
+msgstr "开启<abbr title=\"生成树协议\">STP</abbr>"
msgid "Enable HE.net dynamic endpoint update"
msgstr "启用HE.net动态终端更新"
+msgid "Enable IPv6 negotiation"
+msgstr "启用IPv6协商"
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "在PPP链路上启用IPv6协商"
msgstr "启用NTP客户端"
msgid "Enable Single DES"
-msgstr ""
+msgstr "启用单个DES"
msgid "Enable TFTP server"
msgstr "启用TFTP服务器"
msgstr "启用VLAN"
msgid "Enable WPS pushbutton, requires WPA(2)-PSK"
-msgstr "启用WPS按键配置.要求使用WPA(2)-PSK"
+msgstr "启用WPS按键配置，要求使用WPA(2)-PSK"
msgid "Enable learning and aging"
msgstr "启用智能交换学习"
msgid "Enable mirroring of outgoing packets"
msgstr "启用流出数据包镜像"
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr "启用封装数据包的DF(禁止碎片)标志。"
+
msgid "Enable this mount"
msgstr "启用挂载点"
msgid "Enabled"
msgstr "启用"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "在此桥接上启用生成协议树"
msgid "Encryption"
msgstr "加密"
+msgid "Endpoint Host"
+msgstr "端点主机"
+
+msgid "Endpoint Port"
+msgstr "端点端口"
+
msgid "Erasing..."
msgstr "擦除中..."
msgstr "错误"
msgid "Errored seconds (ES)"
-msgstr ""
+msgstr "错误秒数(ES)"
msgid "Ethernet Adapter"
msgstr "以太网适配器"
msgstr "以太网交换机"
msgid "Exclude interfaces"
-msgstr ""
+msgstr "排除接口"
msgid "Expand hosts"
msgstr "扩展HOSTS文件中的主机后缀"
msgid "Expires"
msgstr "到期时间"
-#, fuzzy
msgid ""
"Expiry time of leased addresses, minimum is 2 minutes (<code>2m</code>)."
-msgstr "地址租期，最小2分钟(<code>2m</code>)。"
+msgstr "租用地址的到期时间，最短2分钟(<code>2m</code>)。"
msgid "External"
+msgstr "远程"
+
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
msgstr ""
msgid "External system log server"
-msgstr "远程log服务器"
+msgstr "远程日志服务器"
msgid "External system log server port"
-msgstr "远程log服务器端口"
+msgstr "远程日志服务器端口"
msgid "External system log server protocol"
-msgstr ""
+msgstr "远程日志服务器协议"
msgid "Extra SSH command options"
msgstr "额外的SSH命令选项"
-msgid "Fast Frames"
-msgstr "快速帧"
-
msgid "File"
msgstr "文件"
msgid "Firewall"
msgstr "防火墙"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "防火墙设置"
msgstr "防火墙状态"
msgid "Firmware File"
-msgstr ""
+msgstr "固件文件"
msgid "Firmware Version"
msgstr "固件版本"
msgstr "TKIP和CCMP(AES)混合加密"
msgid "Force use of NAT-T"
-msgstr ""
+msgstr "强制使用NAT-T"
msgid "Form token mismatch"
-msgstr ""
+msgstr "表单令牌不匹配"
msgid "Forward DHCP traffic"
msgstr "转发DHCP数据包"
msgid "Forward Error Correction Seconds (FECS)"
-msgstr ""
+msgstr "前向纠错秒数(FECS)"
msgid "Forward broadcast traffic"
msgstr "转发广播数据包"
msgid "Free space"
msgstr "空闲空间"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+"有关WireGuard接口和Peer的更多信息：<a href=\"http://wireguard.io\">wireguard."
+"io</a>"
+
msgid "GHz"
msgstr "GHz"
msgstr "基本设置"
msgid "General options for opkg"
-msgstr "opkg基础配置"
+msgstr "Opkg基础配置"
msgid "Generate Config"
msgstr "生成配置"
msgstr "跳转到相关的配置页面"
msgid "Group Password"
-msgstr ""
+msgstr "组密码"
msgid "Guest"
msgstr "访客"
msgid "HE.net username"
msgstr "HE.net用户名"
+msgid "HT mode (802.11n)"
+msgstr "HT模式(802.11n)"
+
msgid "Handler"
msgstr "处理程序"
msgstr "挂起"
msgid "Header Error Code Errors (HEC)"
-msgstr ""
+msgstr "头错误代码错误(HEC)"
msgid "Heartbeat"
msgstr "心跳"
msgstr "Hermes 802.11b 无线网卡"
msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "隐藏<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
+msgstr "隐藏<abbr title=\"扩展服务集标识符\">ESSID</abbr>"
msgid "Host"
-msgstr ""
+msgstr "主机"
msgid "Host entries"
msgstr "主机目录"
msgstr "混合"
msgid "IKE DH Group"
+msgstr "IKE DH组"
+
+msgid "IP Addresses"
msgstr ""
msgid "IP address"
msgid "IPv4-Address"
msgstr "IPv4-地址"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr "IPv4-in-IPv4 (RFC2003)"
+
msgid "IPv6"
msgstr "IPv6"
msgstr "绑定到本地隧道终点的IPv6地址(可选)"
msgid "IPv6 assignment hint"
-msgstr ""
+msgstr "IPv6分配提示"
msgid "IPv6 assignment length"
msgstr "IPv6分配长度"
msgid "IPv6-Address"
msgstr "IPv6-地址"
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6-in-IPv4 (RFC4213)"
msgstr "鉴权"
msgid "If checked, 1DES is enaled"
-msgstr ""
+msgstr "选中以启用1DES"
msgid "If checked, encryption is disabled"
-msgstr ""
+msgstr "选中以禁用加密"
msgid ""
"If specified, mount the device by its UUID instead of a fixed device node"
"In order to prevent unauthorized access to the system, your request has been "
"blocked. Click \"Continue »\" below to return to the previous page."
msgstr ""
+"为了防止对系统的未授权访问，您的请求已被阻止。点击下面的 “继续 »” 来返回上一"
+"页。"
msgid "Inactivity timeout"
msgstr "活动超时"
msgid "Inbound:"
-msgstr "入站:"
+msgstr "入站："
msgid "Info"
msgstr "信息"
msgstr "安装"
msgid "Install iputils-traceroute6 for IPv6 traceroute"
-msgstr "安装iputils-traceroute6以进行IPv6 traceroute"
+msgstr "安装 iputils-traceroute6 以进行IPv6 traceroute"
msgid "Install package %q"
-msgstr "安装软件包%q"
+msgstr "安装软件包 %q"
msgid "Install protocol extensions..."
msgstr "安装扩展协议..."
msgstr "正在关闭接口..."
msgid "Interface name"
-msgstr ""
+msgstr "接口名称"
msgid "Interface not present or not connected yet."
-msgstr "接口不存在或未连接"
+msgstr "接口不存在或未连接。"
msgid "Interface reconnected"
msgstr "接口已重新连接"
msgstr "接口"
msgid "Internal"
-msgstr ""
+msgstr "内部"
msgid "Internal Server Error"
msgstr "内部服务器错误"
msgstr "无效"
msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr "无效的VLAN ID! 只有 %d 和 %d 之间的ID有效。"
+msgstr "无效的VLAN ID！只有 %d 和 %d 之间的ID有效。"
msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr "无效的VLAN ID! 只允许唯一的ID。"
+msgstr "无效的VLAN ID！只允许唯一的ID。"
msgid "Invalid username and/or password! Please try again."
-msgstr "无效的用户名和/或密码! 请重试。"
+msgstr "无效的用户名和/或密码！请重试。"
-#, fuzzy
msgid ""
"It appears that you are trying to flash an image that does not fit into the "
"flash memory, please verify the image file!"
-msgstr "将要刷新的固件与本路由器不兼容，请重新验证固件文件。"
+msgstr "你尝试刷写的固件与本路由器不兼容，请重新验证固件文件。"
-msgid "Java Script required!"
-msgstr "需要Java Script！"
+msgid "JavaScript required!"
+msgstr "需要JavaScript！"
msgid "Join Network"
msgstr "加入网络"
msgid "Join Network: Wireless Scan"
-msgstr "加入网络:搜索无线"
+msgstr "加入网络：搜索无线"
msgid "Joining Network: %q"
-msgstr ""
+msgstr "加入网络：%q"
msgid "Keep settings"
msgstr "保留配置"
msgstr "语言和界面"
msgid "Latency"
-msgstr ""
+msgstr "延迟"
msgid "Leaf"
-msgstr "叶子"
+msgstr "叶状"
msgid "Lease time"
-msgstr ""
+msgstr "租期"
msgid "Lease validity time"
msgstr "有效租期"
msgstr "客户数"
msgid "Limit DNS service to subnets interfaces on which we are serving DNS."
-msgstr ""
+msgstr "将DNS服务限制到我们提供DNS的子网接口。"
msgid "Limit listening to these interfaces, and loopback."
-msgstr ""
+msgstr "仅监听这些接口和环回接口。"
msgid "Line Attenuation (LATN)"
-msgstr ""
+msgstr "线路衰减(LATN)"
msgid "Line Mode"
-msgstr ""
+msgstr "线路模式"
msgid "Line State"
msgstr "线路状态"
msgid "Line Uptime"
-msgstr ""
+msgstr "线路运行时间"
msgid "Link On"
msgstr "活动链接"
"requests to"
msgstr "将指定的域名DNS解析转发到指定的DNS服务器（按照示例填写）"
-msgid "List of SSH key files for auth"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
msgstr ""
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
+msgid "List of SSH key files for auth"
+msgstr "用于认证的SSH密钥文件列表"
+
msgid "List of domains to allow RFC1918 responses for"
msgstr "允许RFC1918响应的域名列表"
msgstr "允许虚假空域名响应的服务器列表"
msgid "Listen Interfaces"
-msgstr ""
+msgstr "监听接口"
+
+msgid "Listen Port"
+msgstr "监听端口"
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr "监听指定的接口；未指定则监听全部"
msgstr "加载中"
msgid "Local IP address to assign"
-msgstr ""
+msgstr "要分配的本地IP地址"
msgid "Local IPv4 address"
msgstr "本地IPv4地址"
msgstr "本地IPv6地址"
msgid "Local Service Only"
-msgstr ""
+msgstr "仅本地服务"
msgid "Local Startup"
msgstr "本地启动脚本"
msgid "Local domain"
msgstr "本地域名"
-#, fuzzy
msgid ""
"Local domain specification. Names matching this domain are never forwarded "
"and are resolved from DHCP or hosts files only"
-msgstr "æ\9c¬å\9c°å\9f\9få\90\8dè§\84å\88\99ã\80\82ä»\8eä¸\8d转å\8f\91å\92\8cå¤\84ç\90\86å\8fªæº\90è\87ªDHCPæ\88\96HOSTSæ\96\87件ç\9a\84æ\9c¬å\9c°å\9f\9få\90\8dæ\95°æ\8d®"
+msgstr "æ\9c¬å\9c°å\9f\9få\90\8dè§\84å\88\99ã\80\82ä¸\8eæ¤å\9f\9få\8c¹é\85\8dç\9a\84å\90\8d称ä»\8eä¸\8d转å\8f\91ï¼\8cä»\85ä»\8eDHCPæ\88\96HOSTSæ\96\87件解æ\9e\90"
msgid "Local domain suffix appended to DHCP names and hosts file entries"
msgstr "本地域名后缀将添加到DHCP和HOSTS文件条目"
msgstr "本地化查询"
msgid "Locked to channel %s used by: %s"
-msgstr "信道道已被锁定为 %s,因为该信道被 %s 使用"
+msgstr "信道道已被锁定为 %s，因为该信道被 %s 使用"
msgid "Log output level"
msgstr "日志记录等级"
msgstr "退出"
msgid "Loss of Signal Seconds (LOSS)"
-msgstr ""
+msgstr "信号丢失秒数(LOSS)"
msgid "Lowest leased address as offset from the network address."
msgstr "网络地址的起始分配基址。"
msgstr "MAC-列表"
msgid "MAP / LW4over6"
-msgstr ""
+msgstr "MAP / LW4over6"
msgid "MB/s"
msgstr "MB/s"
msgid "MD5"
-msgstr ""
+msgstr "MD5"
msgid "MHz"
msgstr "MHz"
msgid ""
"Make sure to clone the root filesystem using something like the commands "
"below:"
-msgstr "请确认你已经复制过整个根文件系统,例如使用以下命令:"
+msgstr "请确认你已经复制过整个根文件系统,例如使用以下命令："
msgid "Manual"
-msgstr ""
+msgstr "手动"
msgid "Max. Attainable Data Rate (ATTNDR)"
-msgstr ""
-
-msgid "Maximum Rate"
-msgstr "最高速率"
+msgstr "最大可达数据速率(ATTNDR)"
msgid "Maximum allowed number of active DHCP leases"
msgstr "允许的最大DHCP租用数"
msgstr "允许的最大并发DNS查询数"
msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr "å\85\81许ç\9a\84æ\9c\80大EDNS.0 UDPæ\8a¥æ\96\87大小"
+msgstr "å\85\81许ç\9a\84æ\9c\80大EDNS.0 UDPæ\95°æ\8d®å\8c\85大小"
msgid "Maximum amount of seconds to wait for the modem to become ready"
msgstr "调制解调器就绪的最大等待时间(秒)"
"Maximum length of the name is 15 characters including the automatic protocol/"
"bridge prefix (br-, 6in4-, pppoe- etc.)"
msgstr ""
+"名称的最大长度为15个字符，包括自动协议/网桥前缀(br-, 6in4-, pppoe- 等等)"
msgid "Maximum number of leased addresses."
msgstr "最大地址分配数量。"
msgid "Metric"
msgstr "跃点数"
-msgid "Minimum Rate"
-msgstr "最低速率"
-
msgid "Minimum hold time"
msgstr "最低持续时间"
msgstr "数据包镜像源端口"
msgid "Missing protocol extension for proto %q"
-msgstr "缺少协议%q的协议扩展"
+msgstr "缺少协议 %q 的协议扩展"
+
+msgid "Mobility Domain"
+msgstr ""
msgid "Mode"
msgstr "模式"
msgid "Move up"
msgstr "上移"
-msgid "Multicast Rate"
-msgstr "多播速率"
-
msgid "Multicast address"
msgstr "多播地址"
msgstr "NAS ID"
msgid "NAT-T Mode"
-msgstr ""
+msgstr "NAT-T模式"
msgid "NAT64 Prefix"
-msgstr ""
+msgstr "NAT64前缀"
msgid "NDP-Proxy"
msgstr "NDP-代理"
msgid "NT Domain"
-msgstr ""
+msgstr "NT域"
msgid "NTP server candidates"
msgstr "候选NTP服务器"
msgstr "本接口未配置DHCP服务器"
msgid "No NAT-T"
-msgstr ""
+msgstr "无NAT-T"
msgid "No chains in this table"
msgstr "本表中没有链"
msgstr "噪声"
msgid "Noise Margin (SNR)"
-msgstr ""
+msgstr "噪声容限(SNR)"
msgid "Noise:"
msgstr "噪声:"
msgid "Non Pre-emtive CRC errors (CRC_P)"
-msgstr ""
+msgstr "非抢占CRC错误(CRC_P)"
msgid "Non-wildcard"
-msgstr ""
+msgstr "非通配符"
msgid "None"
msgstr "无"
msgstr "注意：配置文件将被删除。"
msgid "Note: interface name length"
-msgstr ""
+msgstr "注意：接口名称长度"
msgid "Notice"
msgstr "注意"
msgstr "Nslookup"
msgid "OK"
-msgstr "OK"
+msgstr "确认"
msgid "OPKG-Configuration"
msgstr "OPKG-配置"
msgstr "一个或多个选项值有误！"
msgid "One or more invalid/required values on tab"
-msgstr ""
+msgstr "选项卡上存在一个或多个无效/必需值"
msgid "One or more required fields have no value!"
msgstr "一个或多个必选项值为空！"
msgstr "打开列表..."
msgid "OpenConnect (CISCO AnyConnect)"
-msgstr ""
+msgstr "开放连接(CISCO AnyConnect)"
msgid "Operating frequency"
msgstr "工作频率"
msgid "Option removed"
msgstr "移除的选项"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
-msgstr "可选,设置这个选项会覆盖默认设定的服务器(tic.sixxs.net)"
+msgstr "可选，设置这个选项会覆盖默认设定的服务器(tic.sixxs.net)"
msgid "Optional, use when the SIXXS account has more than one tunnel"
-msgstr "可选,如果你的SIXXS账号拥有一个以上的隧道请设置此项."
+msgstr "可选，如果你的SIXXS账号拥有一个以上的隧道请设置此项."
+
+msgid "Optional."
+msgstr "可选"
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr "可选，为此Peer创建允许IP的路由。"
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr "可选，隧道接口的最大传输单元。"
+
+msgid "Optional. Port of peer."
+msgstr "可选，Peer的端口。"
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+"可选，Keep-Alive消息之间的秒数，默认为0(禁用)。如果此设备位于NAT之后，建议使"
+"用的值为25。"
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr "可选，用于传出和传入数据包的UDP端口。"
msgid "Options"
msgstr "选项"
msgid "Other:"
-msgstr "其余:"
+msgstr "其余："
msgid "Out"
msgstr "出口"
msgid "Outbound:"
-msgstr "出站:"
-
-msgid "Outdoor Channels"
-msgstr "户外频道"
+msgstr "出站："
msgid "Output Interface"
msgstr "网络出口"
msgstr "克隆MAC地址"
msgid "Override MTU"
-msgstr "设置MTU"
+msgstr "更新MTU"
+
+msgid "Override TOS"
+msgstr "更新TOS"
+
+msgid "Override TTL"
+msgstr "更新TTL"
msgid "Override default interface name"
-msgstr ""
+msgstr "更新默认接口名称"
msgid "Override the gateway in DHCP responses"
-msgstr "更新网关"
+msgstr "更新DHCP响应网关"
msgid ""
"Override the netmask sent to clients. Normally it is calculated from the "
"subnet that is served."
-msgstr "更新子网掩码。"
+msgstr "æ\9b´æ\96°å\8f\91é\80\81å\88°å®¢æ\88·ç«¯ç\9a\84å\90ç½\91æ\8e©ç \81ã\80\82"
msgid "Override the table used for internal routes"
msgstr "更新内部路由表"
msgid "PIN"
msgstr "PIN"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP"
msgstr "PPPoE"
msgid "PPPoSSH"
-msgstr ""
+msgstr "PPPoSSH"
msgid "PPtP"
msgstr "PPtP"
msgid "PSID offset"
-msgstr ""
+msgstr "PSID偏移"
msgid "PSID-bits length"
-msgstr ""
+msgstr "PSID位长度"
msgid "PTM/EFM (Packet Transfer Mode)"
-msgstr ""
+msgstr "PTM/EFM(分组传输模式)"
msgid "Package libiwinfo required!"
-msgstr "需要libiwinfo软件包！"
+msgstr "需要 libiwinfo 软件包！"
msgid "Package lists are older than 24 hours"
msgstr "软件包列表已超过24小时未更新"
msgstr "私有密钥"
msgid "Password of inner Private Key"
-msgstr ""
+msgstr "内部私钥的密码"
msgid "Password successfully changed!"
msgstr "密码修改成功！"
msgstr "处理按键动作的可执行文件路径"
msgid "Path to inner CA-Certificate"
-msgstr ""
+msgstr "内部CA证书的路径"
msgid "Path to inner Client-Certificate"
-msgstr ""
+msgstr "内部客户端证书的路径"
msgid "Path to inner Private Key"
-msgstr ""
+msgstr "内部私钥的路径"
msgid "Peak:"
msgstr "峰值:"
msgid "Peer IP address to assign"
-msgstr ""
+msgstr "要分配的Peer IP地址"
+
+msgid "Peers"
+msgstr "Peers"
msgid "Perfect Forward Secrecy"
-msgstr ""
+msgstr "完全正向保密"
msgid "Perform reboot"
msgstr "执行重启"
msgid "Perform reset"
msgstr "执行复位"
+msgid "Persistent Keep Alive"
+msgstr "持续Keep-Alive"
+
msgid "Phy Rate:"
msgstr "物理速率:"
msgstr "端口状态："
msgid "Power Management Mode"
-msgstr ""
+msgstr "电源管理模式"
msgid "Pre-emtive CRC errors (CRCP_P)"
+msgstr "抢占式CRC错误(CRCP_P)"
+
+msgid "Prefix Delegated"
msgstr ""
+msgid "Preshared Key"
+msgstr "预共享密钥"
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgstr "在指定数量的LCP响应故障后假定链路已断开，0为忽略故障"
msgid "Prevent listening on these interfaces."
-msgstr ""
+msgstr "防止监听这些接口。"
msgid "Prevents client-to-client communication"
msgstr "禁止客户端间通信"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Prism2/2.5/3 802.11b 无线网卡"
+msgid "Private Key"
+msgstr "私钥"
+
msgid "Proceed"
msgstr "执行"
msgstr "系统进程"
msgid "Profile"
-msgstr ""
+msgstr "配置文件"
msgid "Prot."
msgstr "协议"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "伪装Ad-Hoc(ahdemo)"
+msgid "Public Key"
+msgstr "公钥"
+
msgid "Public prefix routed to this device for distribution to clients."
-msgstr ""
+msgstr "分配到此设备的公共前缀，用以分发到客户端。"
+
+msgid "QMI Cellular"
+msgstr "QMI蜂窝"
msgid "Quality"
msgstr "质量"
-msgid "RFC3947 NAT-T mode"
+msgid "R0 Key Lifetime"
msgstr ""
+msgid "R1 Key Holder"
+msgstr ""
+
+msgid "RFC3947 NAT-T mode"
+msgstr "RFC3947 NAT-T模式"
+
msgid "RTS/CTS Threshold"
msgstr "RTS/CTS阈值"
"Really delete this interface? The deletion cannot be undone!\\nYou might "
"lose access to this device if you are connected via this interface."
msgstr ""
-"确定要删除此接口？删除操作无法撤销！\\\n"
-"删除此接口，可能导致无法再访问路由器！"
+"确定要删除此接口？删除操作无法撤销！\\n删除此接口，可能导致无法再访问路由器！"
msgid ""
"Really delete this wireless network? The deletion cannot be undone!\\nYou "
"might lose access to this device if you are connected via this network."
msgstr ""
-"确定要删除此无线网络？删除操作无法撤销！\\\n"
-"删除此无线网络，可能导致无法再访问路由器！"
+"确定要删除此无线网络？删除操作无法撤销！\\n删除此无线网络，可能导致无法再访问"
+"路由器！"
msgid "Really reset all changes?"
msgstr "确定要放弃所有更改？"
-#, fuzzy
msgid ""
"Really shut down network?\\nYou might lose access to this device if you are "
"connected via this interface."
msgstr ""
-"确定要关闭此网络？\\\n"
-"å\85³é\97æ¤ç½\91ç»\9cï¼\8cå\8f¯è\83½å¯¼è\87´æ\97 æ³\95å\86\8d访é\97®è·¯ç\94±å\99¨！"
+"确定要关闭此网络？\\n如果你正在使用此接口连接路由器，关闭此网络可能导致连接断"
+"å¼\80！"
msgid ""
"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
"you are connected via this interface."
msgstr ""
-"确定要关闭接口\"%s\" ？\\\n"
-"删除此网络，可能导致无法再访问路由器！"
+"确定要关闭接口 \"%s\"？\\n如果你正在使用此接口连接路由器，关闭此网络可能导致"
+"连接断开！"
msgid "Really switch protocol?"
msgstr "确定要切换协议？"
msgid "Realtime Wireless"
msgstr "实时无线"
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr "重绑定保护"
msgid "Receiver Antenna"
msgstr "接收天线"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "重连此接口"
msgid "References"
msgstr "引用"
-msgid "Regulatory Domain"
-msgstr "无线网络国家区域"
-
msgid "Relay"
msgstr "中继"
msgid "Remote IPv4 address"
msgstr "远程IPv4地址"
+msgid "Remote IPv4 address or FQDN"
+msgstr "远程IPv4地址或FQDN"
+
msgid "Remove"
msgstr "移除"
msgid "Require TLS"
msgstr "必须使用TLS"
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr "某些ISP需要，例如:同轴线网络DOCSIS 3"
+msgstr "某些ISP需要，例如：同轴线网络DOCSIS 3"
+
+msgid "Required. Base64-encoded private key for this interface."
+msgstr "必须，此接口的Base64编码私钥。"
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+"必须，允许该Peer在隧道中使用的IP地址和前缀，通常是该Peer的隧道IP地址和通过隧"
+"道的路由网络。"
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
-msgstr ""
+msgstr "需要上级支持DNSSEC，验证未签名的域响应确实是来自未签名的域。"
msgid "Reset"
msgstr "复位"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr "路由允许的IP"
+
+msgid "Route type"
+msgstr "路由类型"
+
msgid "Routed IPv6 prefix for downstream interfaces"
-msgstr ""
+msgstr "下行接口的路由IPv6前缀"
msgid "Router Advertisement-Service"
-msgstr ""
+msgstr "路由器广告服务"
msgid "Router Password"
msgstr "主机密码"
msgstr "文件系统检查"
msgid "SHA256"
-msgstr ""
+msgstr "SHA256"
msgid ""
"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
"use 6in4 instead"
-msgstr ""
+msgstr "SIXXS仅支持TIC，对于使用IP协议41(RFC4213)的静态隧道，使用6in4"
msgid "SIXXS-handle[/Tunnel-ID]"
msgstr ""
msgid "SNR"
-msgstr ""
+msgstr "SNR"
msgid "SSH Access"
msgstr "SSH访问"
msgstr "移除的区域"
msgid "See \"mount\" manpage for details"
-msgstr "详参\"mount\"联机帮助"
+msgstr "详参 \"mount\" 联机帮助"
msgid ""
"Send LCP echo requests at the given interval in seconds, only effective in "
msgid "Separate Clients"
msgstr "隔离客户端"
-msgid "Separate WDS"
-msgstr "隔离WDS"
-
msgid "Server Settings"
msgstr "服务器设置"
msgid "Services"
msgstr "服务"
-#, fuzzy
msgid "Set up Time Synchronization"
msgstr "设置时间同步"
msgstr "配置DHCP服务器"
msgid "Severely Errored Seconds (SES)"
-msgstr ""
+msgstr "严重误码秒(SES)"
msgid "Short GI"
msgstr ""
msgstr "信号"
msgid "Signal Attenuation (SATN)"
-msgstr ""
+msgstr "信号衰减(SATN)"
msgid "Signal:"
msgstr "信号:"
msgstr "大小"
msgid "Size (.ipk)"
-msgstr ""
+msgstr "大小(.ipk)"
msgid "Skip"
msgstr "跳过"
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
-"抱歉，您的设备暂不支持sysupgrade升级，需手动更新固件。请参考OpenWrt Wiki中关"
-"于此设备的固件更新说明。"
+"抱歉，您的设备暂不支持Sysupgrade升级，需手动更新固件。请参考Wiki中关于此设备"
+"的固件更新说明。"
msgid "Sort"
msgstr "排序"
"dead"
msgstr "指定假设主机已丢失的最大时间(秒)"
+msgid "Specify a TOS (Type of Service)."
+msgstr "指定TOS(服务类型)。"
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr "为封装数据包设置TTL(生存时间)，缺省值：64"
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr "设置MTU(最大传输单位)，缺省值：1280 bytes"
+
msgid "Specify the secret encryption key here."
msgstr "在此指定密钥。"
msgid "Static Routes"
msgstr "静态路由"
-msgid "Static WDS"
-msgstr "静态WDS"
-
msgid "Static address"
msgstr "静态地址"
msgstr "提交"
msgid "Suppress logging"
-msgstr ""
+msgstr "不记录日志"
msgid "Suppress logging of the routine operation of these protocols"
-msgstr ""
+msgstr "不记录这些协议的常规操作日志。"
msgid "Swap"
msgstr "交换区"
msgstr "交换机 %q"
msgid "Switch %q (%s)"
-msgstr "交换机%q (%s)"
+msgstr "交换机 %q (%s)"
msgid ""
"Switch %q has an unknown topology - the VLAN settings might not be accurate."
-msgstr ""
+msgstr "交换机 %q 具有未知的拓扑结构 - VLAN设置可能不正确。"
msgid "Switch VLAN"
-msgstr ""
+msgstr "VLAN交换机"
msgid "Switch protocol"
msgstr "切换协议"
msgstr "对象"
msgid "Target network"
-msgstr ""
+msgstr "目标网络"
msgid "Terminate"
msgstr "关闭"
msgstr "HE.net客户端更新设置已经被改变,您现在必须使用用户名代替用户ID/"
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr "远程隧道端的IPv4地址或完整域名。"
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr "运营商特定的IPv6前缀，通常以<code>::</code>为结尾"
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"存储器或分区的设备节点，(<abbr title=\"for example\">例如</abbr> <code>/dev/"
-"sda1</code>)"
+msgstr "存储器或分区的设备节点，(例如：<code>/dev/sda1</code>)"
msgid ""
"The filesystem that was used to format the memory (<abbr title=\"for example"
"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
"samp>)"
msgstr ""
-"用于格式化存储器的文件系统，(<abbr title=\"for example\">例如</abbr> "
-"<samp><abbr title=\"Third Extended Filesystem\">ext4</abbr></samp>)"
+"用于格式化存储器的文件系统，(例如：<samp><abbr title=\"第三代扩展文件系统"
+"\">ext3</abbr></samp>)"
msgid ""
"The flash image was uploaded. Below is the checksum and file size listed, "
msgid "The given network name is not unique"
msgstr "给定的网络名重复"
-#, fuzzy
msgid ""
"The hardware is not multi-SSID capable and the existing configuration will "
"be replaced if you proceed."
-msgstr "本机的硬件不支持多SSID，继续进行将会覆盖现有配置。"
+msgstr "本机的硬件不支持多SSID，如果继续，现有配置将被替换。"
msgid ""
"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
msgid "The length of the IPv6 prefix in bits"
msgstr "bit格式的IPv6前缀长度"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr "所创建隧道的本地IPv4地址(可选)。"
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
"segments. Often there is by default one Uplink port for a connection to the "
"next greater network like the internet and other ports for a local network."
msgstr ""
-"本设备可以划分为多个<abbr title=\"Virtual Local Area Network\">VLAN</abbr>，"
-"并支持电脑间的直接通讯。<abbr title=\"Virtual Local Area Network\">VLAN</"
-"abbr>也常用于分割不同网段。默认通常是一条上行端口连接ISP，其余端口为本地子"
-"网。"
+"本设备可以划分为多个<abbr title=\"虚拟局域网\">VLAN</abbr>，并支持电脑间的直"
+"接通讯。<abbr title=\"虚拟局域网\">VLAN</abbr>也常用于分割不同网段。默认通常"
+"是一条上行端口连接ISP，其余端口为本地子网。"
msgid "The selected protocol needs a device assigned"
msgstr "所选的协议需要分配设备"
msgid "The submitted security token is invalid or already expired!"
-msgstr ""
+msgstr "提交的安全令牌无效或已过期！"
msgid ""
"The system is erasing the configuration partition now and will reboot itself "
msgid ""
"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
"AYIYA"
-msgstr ""
+msgstr "隧道端点在NAT之后，默认为禁用，仅适用于AYIYA"
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
msgid ""
"There is no device assigned yet, please attach a network device in the "
"\"Physical Settings\" tab"
-msgstr "尚未分配设备，请在\"物理设置\"选项卡中选择网络设备"
+msgstr "尚未分配设备，请在“物理设置”选项卡中选择网络设备"
msgid ""
"There is no password set on this router. Please configure a root password to "
"'server=1.2.3.4' fordomain-specific or full upstream <abbr title=\"Domain "
"Name System\">DNS</abbr> servers."
msgstr ""
+"此文件可能包含类似'server=/domain/1.2.3.4'或'server=1.2.3.4'的行，来解析特定"
+"域名或指定上游<abbr title=\"域名服务系统\">DNS</abbr>服务器。"
msgid ""
"This is a list of shell glob patterns for matching files and directories to "
msgid ""
"This is either the \"Update Key\" configured for the tunnel or the account "
"password if no update key has been configured"
-msgstr "如果更新密钥没有设置的话,隧道的\"更新密钥\"或者账户密码必须填写."
+msgstr "如果更新密钥没有设置的话,隧道的“更新密钥”或者账户密码必须填写。"
msgid ""
"This is the content of /etc/rc.local. Insert your own commands here (in "
msgid ""
"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
"abbr> in the local network"
-msgstr ""
-"这是内网中唯一的<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>服务器"
+msgstr "这是内网中唯一的<abbr title=\"动态主机配置协议\">DHCP</abbr>服务器"
msgid "This is the plain username for logging into the account"
msgstr "登录账户时填写的用户名"
msgid ""
"This is the prefix routed to you by the tunnel broker for use by clients"
-msgstr ""
+msgstr "这是隧道代理分配给你的路由前缀，供客户端使用"
msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr "自定义系统crontab中的计划任务。"
+msgstr "自定义系统Crontab中的计划任务。"
msgid ""
"This is usually the address of the nearest PoP operated by the tunnel broker"
msgid "Tunnel type"
msgstr "隧道类型"
-msgid "Turbo Mode"
-msgstr "Turbo模式"
-
msgid "Tx-Power"
msgstr "传输功率"
msgid "USB Device"
msgstr "USB设备"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "UUID"
msgstr "无法调度"
msgid "Unavailable Seconds (UAS)"
-msgstr ""
+msgstr "不可用秒数(UAS)"
msgid "Unknown"
msgstr "未知"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr "上传兼容的sysupgrade固件以刷新当前系统。"
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
+msgstr "上传兼容的Sysupgrade固件以刷新当前系统。"
msgid "Upload archive..."
msgstr "上传备份..."
msgstr "隧道接口的TTL"
msgid "Use as external overlay (/overlay)"
-msgstr "作为外部overlay使用(/overlay)"
+msgstr "作为外部Overlay使用(/overlay)"
msgid "Use as root filesystem (/)"
msgstr "作为跟文件系统使用(/)"
msgstr "使用广播标签"
msgid "Use builtin IPv6-management"
-msgstr ""
+msgstr "使用内置的IPv6管理"
msgid "Use custom DNS servers"
msgstr "使用自定义的DNS服务器"
msgid "Used Key Slot"
msgstr "启用密码组"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr "客户证书(PEM加密的)"
msgstr "VC-Mux"
msgid "VDSL"
-msgstr ""
+msgstr "VDSL"
msgid "VLANs on %q"
-msgstr "%q上的VLAN"
+msgstr "%q 上的VLAN"
msgid "VLANs on %q (%s)"
-msgstr "%q (%s)上的VLAN"
+msgstr "%q (%s) 上的VLAN"
msgid "VPN Local address"
-msgstr ""
+msgstr "VPN本地地址"
msgid "VPN Local port"
-msgstr ""
+msgstr "VPN本地端口"
msgid "VPN Server"
msgstr "VPN服务器"
msgstr "VPN服务器证书的SHA1哈希值"
msgid "VPNC (CISCO 3000 (and others) VPN)"
-msgstr ""
+msgstr "VPNC (CISCO 3000 和其他VPN)"
msgid "Vendor"
msgstr ""
msgstr "请求DHCP时发送的Vendor Class"
msgid "Verbose"
-msgstr ""
+msgstr "详细"
msgid "Verbose logging by aiccu daemon"
-msgstr ""
+msgstr "aiccu守护程序详细日志"
msgid "Verify"
msgstr "验证"
msgid ""
"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
-msgstr "在NTP同步之前等待时间.设置为0表示同步之前不等待(可选)"
+msgstr "在NTP同步之前等待时间，设置为0表示同步之前不等待(可选)"
msgid "Waiting for changes to be applied..."
msgstr "正在应用更改..."
msgstr "警告：有一些未保存的配置将在重启后丢失！"
msgid "Whether to create an IPv6 default route over the tunnel"
-msgstr ""
+msgstr "是否通过隧道创建IPv6缺省路由"
msgid "Whether to route only packets from delegated prefixes"
-msgstr ""
+msgstr "是否仅路由来自分发前缀的数据包"
msgid "Width"
msgstr "频宽"
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "无线"
msgstr "将收到的DNS请求写入系统日志"
msgid "Write system log to file"
-msgstr ""
-
-msgid "XR Support"
-msgstr "XR支持"
+msgstr "将系统日志写入文件"
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"用了必要的启动脚本，比如\"network\"，可能会导致设备无法访问！</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr "LUCI的正常运行需要开启浏览器的Java Script支持。"
+"You must enable JavaScript in your browser or LuCI will not work properly."
+msgstr "LUCI的正常运行需要开启浏览器的JavaScript支持。"
msgid ""
"Your Internet Explorer is too old to display this page correctly. Please "
"upgrade it to at least version 7 or use another browser like Firefox, Opera "
"or Safari."
msgstr ""
-"你的Internet Explorer已经老到无法正常显示这个页面了!请至少更新到IE7或者使用诸"
-"如Firefox Opera Safari之类的浏览器."
+"你的Internet Explorer已经老到无法正常显示这个页面了！请至少更新到IE7或者使用"
+"诸如Firefox Opera Safari之类的浏览器。"
msgid "any"
msgstr "任意"
msgid ""
"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
"abbr>-leases will be stored"
-msgstr ""
-"存放<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>租约的文件"
+msgstr "存放<abbr title=\"动态主机配置协议\">DHCP</abbr>租约的文件"
msgid "forward"
msgstr "转发"
msgstr "kbit/s"
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "本地<abbr title=\"Domain Name System\">DNS</abbr>解析文件"
+msgstr "本地<abbr title=\"域名服务系统\">DNS</abbr>解析文件"
msgid "minimum 1280, maximum 1480"
-msgstr "最小值1280,最大值1480"
+msgstr "最小值1280，最大值1480"
-msgid "navigation Navigation"
+msgid "minutes"
msgstr ""
+msgid "navigation Navigation"
+msgstr "导航"
+
msgid "no"
-msgstr "no"
+msgstr ""
msgid "no link"
msgstr "未连接"
msgstr "无"
msgid "not present"
-msgstr ""
+msgstr "不存在"
msgid "off"
msgstr "关"
msgstr "开放式"
msgid "overlay"
-msgstr ""
+msgstr "覆盖"
msgid "relay mode"
msgstr "中继模式"
msgstr "服务器模式"
msgid "skiplink1 Skip to navigation"
-msgstr ""
+msgstr "skiplink1 跳转到导航"
msgid "skiplink2 Skip to content"
-msgstr ""
+msgstr "skiplink2 跳到内容"
msgid "stateful-only"
-msgstr ""
+msgstr "有状态的"
msgid "stateless"
-msgstr ""
+msgstr "无状态的"
msgid "stateless + stateful"
-msgstr ""
+msgstr "有状态和无状态的"
msgid "tagged"
msgstr "关联"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "未知"
msgstr "未指定"
msgid "unspecified -or- create:"
-msgstr "未指定 // 创建:"
+msgstr "未指定或创建："
msgid "untagged"
msgstr "不关联"
msgid "« Back"
msgstr "« 后退"
+#~ msgid "AR Support"
+#~ msgstr "AR支持"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Qualcomm/Atheros 802.11%s 无线网卡"
+
+#~ msgid "Background Scan"
+#~ msgstr "后台搜索"
+
+#~ msgid "Compression"
+#~ msgstr "压缩"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "停用HW-Beacon计时器"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "不回送探测响应"
+
+#~ msgid "Fast Frames"
+#~ msgstr "快速帧"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "最高速率"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "最低速率"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "多播速率"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "户外频道"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "无线网络国家区域"
+
+#~ msgid "Separate WDS"
+#~ msgstr "隔离WDS"
+
+#~ msgid "Static WDS"
+#~ msgstr "静态WDS"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "Turbo模式"
+
+#~ msgid "XR Support"
+#~ msgstr "XR支持"
+
+#~ msgid "Required. Public key of peer."
+#~ msgstr "必须，Peer的公钥。"
+
+#~ msgid "An additional network will be created if you leave this checked."
+#~ msgstr "如果选中此复选框，则会创建一个附加网络。"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "取消选中将会另外创建一个新网络，而不会覆盖当前网络设置"
#~ msgid "Join Network: Settings"
-#~ msgstr "加入网络:设置"
+#~ msgstr "加入网络：设置"
#~ msgid "CPU"
#~ msgstr "CPU"
msgid "-- match by label --"
msgstr ""
+msgid "-- match by uuid --"
+msgstr ""
+
msgid "1 Minute Load:"
msgstr "1分鐘負載"
msgid "15 Minute Load:"
msgstr "15分鐘負載"
+msgid "4-character hexadecimal ID"
+msgstr ""
+
msgid "464XLAT (CLAT)"
msgstr ""
msgid "5 Minute Load:"
msgstr "5分鐘負載"
+msgid "6-octet identifier as a hex string - no colons"
+msgstr ""
+
+msgid "802.11r Fast Transition"
+msgstr ""
+
+msgid "802.11w Association SA Query maximum timeout"
+msgstr ""
+
+msgid "802.11w Association SA Query retry timeout"
+msgstr ""
+
+msgid "802.11w Management Frame Protection"
+msgstr ""
+
+msgid "802.11w maximum timeout"
+msgstr ""
+
+msgid "802.11w retry timeout"
+msgstr ""
+
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "APN"
msgstr "APN"
-msgid "AR Support"
-msgstr "AR支援"
-
msgid "ARP retry threshold"
msgstr "ARP重試門檻"
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr "允許127.0.0.0/8範圍內的上游回應，例如：RBL服務"
+msgid "Allowed IPs"
+msgstr ""
+
msgid ""
"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
"\">Tunneling Comparison</a> on SIXXS"
msgid "Always announce default router"
msgstr ""
-msgid "An additional network will be created if you leave this checked."
-msgstr ""
-
msgid "Annex"
msgstr ""
msgid "Associated Stations"
msgstr "已連接站點"
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Atheros 802.11%s 無線控制器"
-
msgid "Auth Group"
msgstr ""
msgid "Authentication"
msgstr "認證"
+msgid "Authentication Type"
+msgstr ""
+
msgid "Authoritative"
msgstr "授權"
msgid "Back to scan results"
msgstr "返回至掃描結果"
-msgid "Background Scan"
-msgstr "背景搜尋"
-
msgid "Backup / Flash Firmware"
msgstr "備份/升級韌體"
"下面是待備份的檔案清單。包含了更改的設定檔案、必要的基本檔案和使用者自訂的備"
"份檔案"
+msgid "Bind interface"
+msgstr ""
+
msgid "Bind only to specific interfaces rather than wildcard address."
msgstr ""
+msgid "Bind the tunnel to this interface (optional)."
+msgstr ""
+
msgid "Bitrate"
msgstr "傳輸速率"
msgid "Check fileystems before mount"
msgstr ""
+msgid "Check this option to delete the existing networks from this radio."
+msgstr ""
+
msgid "Checksum"
msgstr "效驗碼"
msgid "Common Configuration"
msgstr "一般設定"
-msgid "Compression"
-msgstr "壓縮"
-
msgid "Configuration"
msgstr "設定"
msgid "Disable Encryption"
msgstr ""
-msgid "Disable HW-Beacon timer"
-msgstr "關閉硬體燈號計時器"
-
msgid "Disabled"
msgstr "關閉"
+msgid "Disabled (default)"
+msgstr ""
+
msgid "Discard upstream RFC1918 responses"
msgstr "丟棄上游RFC1918 虛擬IP網路的回應"
msgid "Do not forward reverse lookups for local networks"
msgstr "對本地網域不轉發反解析鎖定"
-msgid "Do not send probe responses"
-msgstr "不傳送探測回應"
-
msgid "Domain required"
msgstr "網域必要的"
msgid "Domain whitelist"
msgstr "網域白名單"
+msgid "Don't Fragment"
+msgstr ""
+
msgid ""
"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
msgid "Enable HE.net dynamic endpoint update"
msgstr "啟用HE.net服務代管動態更新"
+msgid "Enable IPv6 negotiation"
+msgstr ""
+
msgid "Enable IPv6 negotiation on the PPP link"
msgstr "啟用PPP連結上的IPv6交涉"
msgid "Enable mirroring of outgoing packets"
msgstr ""
+msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets."
+msgstr ""
+
msgid "Enable this mount"
msgstr "啟用掛載點"
msgid "Enabled"
msgstr "啟用"
+msgid ""
+"Enables fast roaming among access points that belong to the same Mobility "
+"Domain"
+msgstr ""
+
msgid "Enables the Spanning Tree Protocol on this bridge"
msgstr "在橋接器上啟用802.1d Spanning Tree協定"
msgid "Encryption"
msgstr "加密"
+msgid "Endpoint Host"
+msgstr ""
+
+msgid "Endpoint Port"
+msgstr ""
+
msgid "Erasing..."
msgstr "刪除中..."
msgid "External"
msgstr ""
+msgid "External R0 Key Holder List"
+msgstr ""
+
+msgid "External R1 Key Holder List"
+msgstr ""
+
msgid "External system log server"
msgstr "外部系統日誌伺服器"
msgid "Extra SSH command options"
msgstr ""
-msgid "Fast Frames"
-msgstr "快速迅框群"
-
msgid "File"
msgstr "檔案"
msgid "Firewall"
msgstr "防火牆"
+msgid "Firewall Mark"
+msgstr ""
+
msgid "Firewall Settings"
msgstr "防火牆設定"
msgid "Free space"
msgstr "剩餘空間"
+msgid ""
+"Further information about WireGuard interfaces and peers at <a href=\"http://"
+"wireguard.io\">wireguard.io</a>."
+msgstr ""
+
msgid "GHz"
msgstr "GHz"
msgid "HE.net username"
msgstr ""
+msgid "HT mode (802.11n)"
+msgstr ""
+
msgid "Handler"
msgstr "多執行緒"
msgid "IKE DH Group"
msgstr ""
+msgid "IP Addresses"
+msgstr ""
+
msgid "IP address"
msgstr "IP位址"
msgid "IPv4-Address"
msgstr "IPv4-位址"
+msgid "IPv4-in-IPv4 (RFC2003)"
+msgstr ""
+
msgid "IPv6"
msgstr "IPv6版"
msgid "IPv6-Address"
msgstr "IPv6-位址"
+msgid "IPv6-PD"
+msgstr ""
+
msgid "IPv6-in-IPv4 (RFC4213)"
msgstr "IPv6包覆在IPv4內(RFC4213)"
"flash memory, please verify the image file!"
msgstr "它顯示你正嘗試更新不適用於這個flash記憶體的映像檔,請檢查確認這個映像檔"
-msgid "Java Script required!"
+msgid "JavaScript required!"
msgstr "需要Java腳本"
msgid "Join Network"
"requests to"
msgstr "列出 <abbr title=\"Domain Name System\">DNS</abbr> 伺服器以便轉發請求"
+msgid ""
+"List of R0KHs in the same Mobility Domain. <br />Format: MAC-address,NAS-"
+"Identifier,128-bit key as hex string. <br />This list is used to map R0KH-ID "
+"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key "
+"from the R0KH that the STA used during the Initial Mobility Domain "
+"Association."
+msgstr ""
+
+msgid ""
+"List of R1KHs in the same Mobility Domain. <br />Format: MAC-address,R1KH-ID "
+"as 6 octets with colons,128-bit key as hex string. <br />This list is used "
+"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the "
+"R0KH. This is also the list of authorized R1KHs in the MD that can request "
+"PMK-R1 keys."
+msgstr ""
+
msgid "List of SSH key files for auth"
msgstr ""
msgid "Listen Interfaces"
msgstr ""
+msgid "Listen Port"
+msgstr ""
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr "只許在給予的介面上聆聽, 如果未指定, 全都允許"
msgid "Max. Attainable Data Rate (ATTNDR)"
msgstr ""
-msgid "Maximum Rate"
-msgstr "最快速度"
-
msgid "Maximum allowed number of active DHCP leases"
msgstr "允許啟用DHCP釋放的最大數量"
msgid "Metric"
msgstr "公測單位"
-msgid "Minimum Rate"
-msgstr "最低速度"
-
msgid "Minimum hold time"
msgstr "可持有的最低時間"
msgid "Missing protocol extension for proto %q"
msgstr "協定 %q 漏失的延伸協定"
+msgid "Mobility Domain"
+msgstr ""
+
msgid "Mode"
msgstr "模式"
msgid "Move up"
msgstr "往上移"
-msgid "Multicast Rate"
-msgstr "多點群播速度"
-
msgid "Multicast address"
msgstr "多點群播位址"
msgid "Option removed"
msgstr "選項已移除"
+msgid "Optional"
+msgstr ""
+
msgid "Optional, specify to override default server (tic.sixxs.net)"
msgstr ""
msgid "Optional, use when the SIXXS account has more than one tunnel"
msgstr ""
+msgid "Optional."
+msgstr ""
+
+msgid ""
+"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, "
+"starting with <code>0x</code>."
+msgstr ""
+
+msgid ""
+"Optional. Base64-encoded preshared key. Adds in an additional layer of "
+"symmetric-key cryptography for post-quantum resistance."
+msgstr ""
+
+msgid "Optional. Create routes for Allowed IPs for this peer."
+msgstr ""
+
+msgid ""
+"Optional. Host of peer. Names are resolved prior to bringing up the "
+"interface."
+msgstr ""
+
+msgid "Optional. Maximum Transmission Unit of tunnel interface."
+msgstr ""
+
+msgid "Optional. Port of peer."
+msgstr ""
+
+msgid ""
+"Optional. Seconds between keep alive messages. Default is 0 (disabled). "
+"Recommended value if this device is behind a NAT is 25."
+msgstr ""
+
+msgid "Optional. UDP port used for outgoing and incoming packets."
+msgstr ""
+
msgid "Options"
msgstr "選項"
msgid "Outbound:"
msgstr "外連:"
-msgid "Outdoor Channels"
-msgstr "室外通道"
-
msgid "Output Interface"
msgstr ""
msgid "Override MTU"
msgstr "覆蓋MTU數值"
+msgid "Override TOS"
+msgstr ""
+
+msgid "Override TTL"
+msgstr ""
+
msgid "Override default interface name"
msgstr ""
msgid "PIN"
msgstr "PIN碼"
+msgid "PMK R1 Push"
+msgstr ""
+
msgid "PPP"
msgstr "PPP協定"
msgid "Peer IP address to assign"
msgstr ""
+msgid "Peers"
+msgstr ""
+
msgid "Perfect Forward Secrecy"
msgstr ""
msgid "Perform reset"
msgstr "執行重置"
+msgid "Persistent Keep Alive"
+msgstr ""
+
msgid "Phy Rate:"
msgstr "傳輸率:"
msgid "Pre-emtive CRC errors (CRCP_P)"
msgstr ""
+msgid "Prefix Delegated"
+msgstr ""
+
+msgid "Preshared Key"
+msgstr ""
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Prism2/2.5/3 802.11b Wireless Controller"
msgstr "Prism2/2.5/3 802.11b 無線控制器"
+msgid "Private Key"
+msgstr ""
+
msgid "Proceed"
msgstr "前進"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "偽裝Ad-Hoc (ahdemo模式)"
+msgid "Public Key"
+msgstr ""
+
msgid "Public prefix routed to this device for distribution to clients."
msgstr ""
+msgid "QMI Cellular"
+msgstr ""
+
msgid "Quality"
msgstr "品質"
+msgid "R0 Key Lifetime"
+msgstr ""
+
+msgid "R1 Key Holder"
+msgstr ""
+
msgid "RFC3947 NAT-T mode"
msgstr ""
msgid "Realtime Wireless"
msgstr "即時無線網路"
+msgid "Reassociation Deadline"
+msgstr ""
+
msgid "Rebind protection"
msgstr "重新綁護"
msgid "Receiver Antenna"
msgstr "接收天線"
+msgid "Recommended. IP addresses of the WireGuard interface."
+msgstr ""
+
msgid "Reconnect this interface"
msgstr "重新連接這個介面"
msgid "References"
msgstr "引用"
-msgid "Regulatory Domain"
-msgstr "監管網域"
-
msgid "Relay"
msgstr "延遲"
msgid "Remote IPv4 address"
msgstr "遠端IPv4位址"
+msgid "Remote IPv4 address or FQDN"
+msgstr ""
+
msgid "Remove"
msgstr "移除"
msgid "Require TLS"
msgstr ""
+msgid "Required"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "對特定的ISP需要,例如.DOCSIS 3 加速有線電視寬頻網路"
+msgid "Required. Base64-encoded private key for this interface."
+msgstr ""
+
+msgid "Required. Base64-encoded public key of peer."
+msgstr ""
+
+msgid ""
+"Required. IP addresses and prefixes that this peer is allowed to use inside "
+"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer "
+"routes through the tunnel."
+msgstr ""
+
+msgid ""
+"Requires the 'full' version of wpad/hostapd and support from the wifi driver "
+"<br />(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)"
+msgstr ""
+
msgid ""
"Requires upstream supports DNSSEC; verify unsigned domain responses really "
"come from unsigned domains"
msgid "Root preparation"
msgstr ""
+msgid "Route Allowed IPs"
+msgstr ""
+
+msgid "Route type"
+msgstr ""
+
msgid "Routed IPv6 prefix for downstream interfaces"
msgstr ""
msgid "Separate Clients"
msgstr "分隔用戶端"
-msgid "Separate WDS"
-msgstr "分隔WDS中繼"
-
msgid "Server Settings"
msgstr "伺服器設定值"
msgid "Sorry, the server encountered an unexpected error."
msgstr "抱歉, 伺服器遭遇非預期的錯誤."
-#, fuzzy
msgid ""
"Sorry, there is no sysupgrade support present; a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
+"flashed manually. Please refer to the wiki for device specific install "
+"instructions."
msgstr ""
-"抱歉, 沒有sysupgrade支援出現, 新版韌體映像檔必須手動更新. 請回歸OpenWrt wiki"
-"找尋特定設備安裝指引."
+"抱歉, 沒有sysupgrade支援出現, 新版韌體映像檔必須手動更新. 請回歸wiki找尋特定"
+"設備安裝指引."
msgid "Sort"
msgstr "分類"
"dead"
msgstr "指定可請求的最大秒數直到駭客主機死亡為止"
+msgid "Specify a TOS (Type of Service)."
+msgstr ""
+
+msgid ""
+"Specify a TTL (Time to Live) for the encapsulating packet other than the "
+"default (64)."
+msgstr ""
+
+msgid ""
+"Specify an MTU (Maximum Transmission Unit) other than the default (1280 "
+"bytes)."
+msgstr ""
+
msgid "Specify the secret encryption key here."
msgstr "指定加密金鑰在此."
msgid "Static Routes"
msgstr "靜態路由"
-msgid "Static WDS"
-msgstr "靜態WDS"
-
msgid "Static address"
msgstr "靜態位址"
msgstr ""
msgid ""
+"The IPv4 address or the fully-qualified domain name of the remote tunnel end."
+msgstr ""
+
+msgid ""
"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
msgstr "指定到這供應商的IPv6字首, 通常用 <code>::</code>結尾"
msgid "The length of the IPv6 prefix in bits"
msgstr "這IPv6開頭以位元計的長度"
+msgid "The local IPv4 address over which the tunnel is created (optional)."
+msgstr ""
+
msgid ""
"The network ports on this device can be combined to several <abbr title="
"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
msgid "Tunnel type"
msgstr ""
-msgid "Turbo Mode"
-msgstr "渦輪爆衝模式"
-
msgid "Tx-Power"
msgstr "傳送-功率"
msgid "USB Device"
msgstr "USB設備"
+msgid "USB Ports"
+msgstr ""
+
msgid "UUID"
msgstr "設備通用唯一識別碼UUID"
msgid ""
"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
+"Check \"Keep settings\" to retain the current configuration (requires a "
+"compatible firmware image)."
msgstr ""
"上傳一個sysupgrade-相容的映像檔在這以便替代正執行中的韌體. 勾選\"保持設定\"以"
-"保留目前設定值(必須要是OpenWrt相容性韌體映像檔)."
+"保留目前設定值(必須要是OpenWrt/LEDE相容性韌體映像檔)."
msgid "Upload archive..."
msgstr "上傳壓縮檔..."
msgid "Used Key Slot"
msgstr "已使用的關鍵插槽"
+msgid ""
+"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not "
+"needed with normal WPA(2)-PSK."
+msgstr ""
+
msgid "User certificate (PEM encoded)"
msgstr ""
msgid "Width"
msgstr ""
+msgid "WireGuard VPN"
+msgstr ""
+
msgid "Wireless"
msgstr "無線網路"
msgid "Write system log to file"
msgstr ""
-msgid "XR Support"
-msgstr "支援XR無線陣列"
-
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"告: 假如你關閉必要的初始化腳本像\"網路\", 你的設備將可能無法存取!</strong>"
msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr "在瀏覽器你必須啟用Java Script否則LuCI無法正常運作."
+"You must enable JavaScript in your browser or LuCI will not work properly."
+msgstr "在瀏覽器你必須啟用JavaScript否則LuCI無法正常運作."
msgid ""
"Your Internet Explorer is too old to display this page correctly. Please "
msgid "minimum 1280, maximum 1480"
msgstr ""
+msgid "minutes"
+msgstr ""
+
msgid "navigation Navigation"
msgstr ""
msgid "tagged"
msgstr "標籤"
+msgid "time units (TUs / 1.024 ms) [1000-65535]"
+msgstr ""
+
msgid "unknown"
msgstr "未知"
msgid "« Back"
msgstr "« 倒退"
+#~ msgid "AR Support"
+#~ msgstr "AR支援"
+
+#~ msgid "Atheros 802.11%s Wireless Controller"
+#~ msgstr "Atheros 802.11%s 無線控制器"
+
+#~ msgid "Background Scan"
+#~ msgstr "背景搜尋"
+
+#~ msgid "Compression"
+#~ msgstr "壓縮"
+
+#~ msgid "Disable HW-Beacon timer"
+#~ msgstr "關閉硬體燈號計時器"
+
+#~ msgid "Do not send probe responses"
+#~ msgstr "不傳送探測回應"
+
+#~ msgid "Fast Frames"
+#~ msgstr "快速迅框群"
+
+#~ msgid "Maximum Rate"
+#~ msgstr "最快速度"
+
+#~ msgid "Minimum Rate"
+#~ msgstr "最低速度"
+
+#~ msgid "Multicast Rate"
+#~ msgstr "多點群播速度"
+
+#~ msgid "Outdoor Channels"
+#~ msgstr "室外通道"
+
+#~ msgid "Regulatory Domain"
+#~ msgstr "監管網域"
+
+#~ msgid "Separate WDS"
+#~ msgstr "分隔WDS中繼"
+
+#~ msgid "Static WDS"
+#~ msgstr "靜態WDS"
+
+#~ msgid "Turbo Mode"
+#~ msgstr "渦輪爆衝模式"
+
+#~ msgid "XR Support"
+#~ msgstr "支援XR無線陣列"
+
#~ msgid "An additional network will be created if you leave this unchecked."
#~ msgstr "取消選取將會另外建立一個新網路，而不會覆蓋目前的網路設定"
ipaddrs = net:ipaddrs(),
ip6addrs = net:ip6addrs(),
dnsaddrs = net:dnsaddrs(),
+ ip6prefix = net:ip6prefix(),
name = device:shortname(),
type = device:type(),
ifname = device:name(),
entry({"admin", "status", "realtime", "bandwidth"}, template("admin_status/bandwidth"), _("Traffic"), 2).leaf = true
entry({"admin", "status", "realtime", "bandwidth_status"}, call("action_bandwidth")).leaf = true
- entry({"admin", "status", "realtime", "wireless"}, template("admin_status/wireless"), _("Wireless"), 3).leaf = true
- entry({"admin", "status", "realtime", "wireless_status"}, call("action_wireless")).leaf = true
+ if nixio.fs.access("/etc/config/wireless") then
+ entry({"admin", "status", "realtime", "wireless"}, template("admin_status/wireless"), _("Wireless"), 3).leaf = true
+ entry({"admin", "status", "realtime", "wireless_status"}, call("action_wireless")).leaf = true
+ end
entry({"admin", "status", "realtime", "connections"}, template("admin_status/connections"), _("Connections"), 4).leaf = true
entry({"admin", "status", "realtime", "connections_status"}, call("action_connections")).leaf = true
luci.sys.call("date -s '%04d-%02d-%02d %02d:%02d:%02d'" %{
date.year, date.month, date.day, date.hour, date.min, date.sec
})
+ luci.sys.call("/etc/init.d/sysfixtime restart")
end
end
metric = s:option(Value, "metric", translate("Metric"))
metric.placeholder = 0
metric.datatype = "range(0,255)"
+metric.size = 5
metric.rmempty = true
mtu = s:option(Value, "mtu", translate("MTU"))
mtu.placeholder = 1500
mtu.datatype = "range(64,9000)"
+mtu.size = 5
mtu.rmempty = true
+routetype = s:option(Value, "type", translate("Route type"))
+routetype:value("", "unicast")
+routetype:value("local", "local")
+routetype:value("broadcast", "broadcast")
+routetype:value("multicast", "multicast")
+routetype:value("unreachable", "unreachable")
+routetype:value("prohibit", "prohibit")
+routetype:value("blackhole", "blackhole")
+routetype:value("anycast", "anycast")
+routetype.default = ""
+routetype.rmempty = true
+
if fs.access("/proc/net/ipv6_route") then
s = m:section(TypedSection, "route6", translate("Static IPv6 Routes"))
s.addremove = true
metric = s:option(Value, "metric", translate("Metric"))
metric.placeholder = 0
metric.datatype = "range(0,65535)" -- XXX: not sure
+ metric.size = 5
metric.rmempty = true
mtu = s:option(Value, "mtu", translate("MTU"))
mtu.placeholder = 1500
mtu.datatype = "range(64,9000)"
+ mtu.size = 5
mtu.rmempty = true
+
+ routetype = s:option(Value, "type", translate("Route type"))
+ routetype:value("", "unicast")
+ routetype:value("local", "local")
+ routetype:value("broadcast", "broadcast")
+ routetype:value("multicast", "multicast")
+ routetype:value("unreachable", "unreachable")
+ routetype:value("prohibit", "prohibit")
+ routetype:value("blackhole", "blackhole")
+ routetype:value("anycast", "anycast")
+ routetype.default = ""
+ routetype.rmempty = true
end
-- wireless toggle was requested, commit and reload page
function m.parse(map)
+ local new_cc = m:formvalue("cbid.wireless.%s.country" % wdev:name())
+ local old_cc = m:get(wdev:name(), "country")
+
if m:formvalue("cbid.wireless.%s.__toggle" % wdev:name()) then
if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
wnet:set("disabled", nil)
luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless", arg[1]))
return
end
+
Map.parse(map)
+
+ if m:get(wdev:name(), "type") == "mac80211" and new_cc and new_cc ~= old_cc then
+ luci.sys.call("iw reg set %q" % new_cc)
+ luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless", arg[1]))
+ return
+ end
end
m.title = luci.util.pcdata(wnet:get_i18n())
end
end
end
- return (list[#list] and list[#list].driver_dbm) or pwr or 0
+ return pwr or ""
end
local iw = luci.sys.wifi.getiwinfo(arg[1])
------------------- MAC80211 Device ------------------
if hwtype == "mac80211" then
- if #tx_power_list > 1 then
+ if #tx_power_list > 0 then
tp = s:taboption("general", ListValue,
"txpower", translate("Transmit Power"), "dBm")
tp.rmempty = true
return txpower_current(Value.cfgvalue(...), tx_power_list)
end
+ tp:value("", translate("auto"))
for _, p in ipairs(tx_power_list) do
tp:value(p.driver_dbm, "%i dBm (%i mW)"
%{ p.display_dbm, p.display_mw })
end
-------------------- Madwifi Device ------------------
+------------------- Broadcom Device ------------------
-if hwtype == "atheros" then
+if hwtype == "broadcom" then
tp = s:taboption("general",
(#tx_power_list > 0) and ListValue or Value,
"txpower", translate("Transmit Power"), "dBm")
return txpower_current(Value.cfgvalue(...), tx_power_list)
end
+ tp:value("", translate("auto"))
for _, p in ipairs(tx_power_list) do
tp:value(p.driver_dbm, "%i dBm (%i mW)"
%{ p.display_dbm, p.display_mw })
end
- s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
-
- if not nsantenna then
- ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
- ant1.widget = "radio"
- ant1.orientation = "horizontal"
- ant1:depends("diversity", "")
- ant1:value("0", translate("auto"))
- ant1:value("1", translate("Antenna 1"))
- ant1:value("2", translate("Antenna 2"))
-
- ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
- ant2.widget = "radio"
- ant2.orientation = "horizontal"
- ant2:depends("diversity", "")
- ant2:value("0", translate("auto"))
- ant2:value("1", translate("Antenna 1"))
- ant2:value("2", translate("Antenna 2"))
-
- else -- NanoFoo
- local ant = s:taboption("advanced", ListValue, "antenna", translate("Transmitter Antenna"))
- ant:value("auto")
- ant:value("vertical")
- ant:value("horizontal")
- ant:value("external")
+ mode = s:taboption("advanced", ListValue, "hwmode", translate("Band"))
+ if hw_modes.b then
+ mode:value("11b", "2.4GHz (802.11b)")
+ if hw_modes.g then
+ mode:value("11bg", "2.4GHz (802.11b+g)")
+ end
end
-
- s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
- translate("Distance to farthest network member in meters."))
- s:taboption("advanced", Value, "regdomain", translate("Regulatory Domain"))
- s:taboption("advanced", Value, "country", translate("Country Code"))
- s:taboption("advanced", Flag, "outdoor", translate("Outdoor Channels"))
-
- --s:option(Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
-end
-
-
-
-------------------- Broadcom Device ------------------
-
-if hwtype == "broadcom" then
- tp = s:taboption("general",
- (#tx_power_list > 0) and ListValue or Value,
- "txpower", translate("Transmit Power"), "dBm")
-
- tp.rmempty = true
- tp.default = tx_power_cur
-
- function tp.cfgvalue(...)
- return txpower_current(Value.cfgvalue(...), tx_power_list)
+ if hw_modes.g then
+ mode:value("11g", "2.4GHz (802.11g)")
+ mode:value("11gst", "2.4GHz (802.11g + Turbo)")
+ mode:value("11lrs", "2.4GHz (802.11g Limited Rate Support)")
end
-
- for _, p in ipairs(tx_power_list) do
- tp:value(p.driver_dbm, "%i dBm (%i mW)"
- %{ p.display_dbm, p.display_mw })
+ if hw_modes.a then mode:value("11a", "5GHz (802.11a)") end
+ if hw_modes.n then
+ if hw_modes.g then
+ mode:value("11ng", "2.4GHz (802.11g+n)")
+ mode:value("11n", "2.4GHz (802.11n)")
+ end
+ if hw_modes.a then
+ mode:value("11na", "5GHz (802.11a+n)")
+ mode:value("11n", "5GHz (802.11n)")
+ end
+ htmode = s:taboption("advanced", ListValue, "htmode", translate("HT mode (802.11n)"))
+ htmode:depends("hwmode", "11ng")
+ htmode:depends("hwmode", "11na")
+ htmode:depends("hwmode", "11n")
+ htmode:value("HT20", "20MHz")
+ htmode:value("HT40", "40MHz")
end
ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
end
-
--------------------- Madwifi Interface ----------------------
-
-if hwtype == "atheros" then
- mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
- mode:value("monitor", translate("Monitor"))
- mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
- mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
- mode:value("wds", translate("Static WDS"))
-
- function mode.write(self, section, value)
- if value == "ap-wds" then
- ListValue.write(self, section, "ap")
- m.uci:set("wireless", section, "wds", 1)
- elseif value == "sta-wds" then
- ListValue.write(self, section, "sta")
- m.uci:set("wireless", section, "wds", 1)
- else
- ListValue.write(self, section, value)
- m.uci:delete("wireless", section, "wds")
- end
- end
-
- function mode.cfgvalue(self, section)
- local mode = ListValue.cfgvalue(self, section)
- local wds = m.uci:get("wireless", section, "wds") == "1"
-
- if mode == "ap" and wds then
- return "ap-wds"
- elseif mode == "sta" and wds then
- return "sta-wds"
- else
- return mode
- end
- end
-
- bssid:depends({mode="adhoc"})
- bssid:depends({mode="ahdemo"})
- bssid:depends({mode="wds"})
-
- wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
- wdssep:depends({mode="ap-wds"})
-
- s:taboption("advanced", Flag, "doth", "802.11h")
- hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="adhoc"})
- hidden:depends({mode="ap-wds"})
- hidden:depends({mode="sta-wds"})
- isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
- translate("Prevents client-to-client communication"))
- isolate:depends({mode="ap"})
- s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
-
- mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
- mp:value("", translate("disable"))
- mp:value("allow", translate("Allow listed only"))
- mp:value("deny", translate("Allow all except listed"))
-
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
- ml.datatype = "macaddr"
- ml:depends({macpolicy="allow"})
- ml:depends({macpolicy="deny"})
- nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
-
- s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
- s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
- s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
- s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
- s:taboption("advanced", Flag, "compression", translate("Compression"))
-
- s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
- s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
- s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
-
- s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
- s:taboption("advanced", Flag, "xr", translate("XR Support"))
- s:taboption("advanced", Flag, "ar", translate("AR Support"))
-
- local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
- swm:depends({mode="adhoc"})
-
- local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
- nos:depends({mode="sta"})
- nos:depends({mode="sta-wds"})
-
- local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
- probereq.enabled = "0"
- probereq.disabled = "1"
-end
-
-
-------------------- Broadcom Interface ----------------------
if hwtype == "broadcom" then
encr:value("wep-open", translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"}, {mode="ahdemo"}, {mode="wds"})
encr:value("wep-shared", translate("WEP Shared Key"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"}, {mode="ahdemo"}, {mode="wds"})
-if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
+if hwtype == "mac80211" or hwtype == "prism2" then
local supplicant = fs.access("/usr/sbin/wpa_supplicant")
local hostapd = fs.access("/usr/sbin/hostapd")
end
-if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
- nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
+if hwtype == "mac80211" or hwtype == "prism2" then
+
+ -- Probe 802.11r support (and EAP support as a proxy for Openwrt)
+ local has_80211r = (os.execute("hostapd -v11r 2>/dev/null || hostapd -veap 2>/dev/null") == 0)
+
+ ieee80211r = s:taboption("encryption", Flag, "ieee80211r",
+ translate("802.11r Fast Transition"),
+ translate("Enables fast roaming among access points that belong " ..
+ "to the same Mobility Domain"))
+ ieee80211r:depends({mode="ap", encryption="wpa"})
+ ieee80211r:depends({mode="ap", encryption="wpa2"})
+ ieee80211r:depends({mode="ap-wds", encryption="wpa"})
+ ieee80211r:depends({mode="ap-wds", encryption="wpa2"})
+ if has_80211r then
+ ieee80211r:depends({mode="ap", encryption="psk"})
+ ieee80211r:depends({mode="ap", encryption="psk2"})
+ ieee80211r:depends({mode="ap", encryption="psk-mixed"})
+ end
+ ieee80211r.rmempty = true
+
+ nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"),
+ translate("Used for two different purposes: RADIUS NAS ID and " ..
+ "802.11r R0KH-ID. Not needed with normal WPA(2)-PSK."))
nasid:depends({mode="ap", encryption="wpa"})
nasid:depends({mode="ap", encryption="wpa2"})
nasid:depends({mode="ap-wds", encryption="wpa"})
nasid:depends({mode="ap-wds", encryption="wpa2"})
+ nasid:depends({ieee80211r="1"})
nasid.rmempty = true
+ mobility_domain = s:taboption("encryption", Value, "mobility_domain",
+ translate("Mobility Domain"),
+ translate("4-character hexadecimal ID"))
+ mobility_domain:depends({ieee80211r="1"})
+ mobility_domain.placeholder = "4f57"
+ mobility_domain.datatype = "and(hexstring,rangelength(4,4))"
+ mobility_domain.rmempty = true
+
+ r0_key_lifetime = s:taboption("encryption", Value, "r0_key_lifetime",
+ translate("R0 Key Lifetime"), translate("minutes"))
+ r0_key_lifetime:depends({ieee80211r="1"})
+ r0_key_lifetime.placeholder = "10000"
+ r0_key_lifetime.datatype = "uinteger"
+ r0_key_lifetime.rmempty = true
+
+ r1_key_holder = s:taboption("encryption", Value, "r1_key_holder",
+ translate("R1 Key Holder"),
+ translate("6-octet identifier as a hex string - no colons"))
+ r1_key_holder:depends({ieee80211r="1"})
+ r1_key_holder.placeholder = "00004f577274"
+ r1_key_holder.datatype = "and(hexstring,rangelength(12,12))"
+ r1_key_holder.rmempty = true
+
+ reassociation_deadline = s:taboption("encryption", Value, "reassociation_deadline",
+ translate("Reassociation Deadline"),
+ translate("time units (TUs / 1.024 ms) [1000-65535]"))
+ reassociation_deadline:depends({ieee80211r="1"})
+ reassociation_deadline.placeholder = "1000"
+ reassociation_deadline.datatype = "range(1000,65535)"
+ reassociation_deadline.rmempty = true
+
+ pmk_r1_push = s:taboption("encryption", Flag, "pmk_r1_push", translate("PMK R1 Push"))
+ pmk_r1_push:depends({ieee80211r="1"})
+ pmk_r1_push.placeholder = "0"
+ pmk_r1_push.rmempty = true
+
+ r0kh = s:taboption("encryption", DynamicList, "r0kh", translate("External R0 Key Holder List"),
+ translate("List of R0KHs in the same Mobility Domain. " ..
+ "<br />Format: MAC-address,NAS-Identifier,128-bit key as hex string. " ..
+ "<br />This list is used to map R0KH-ID (NAS Identifier) to a destination " ..
+ "MAC address when requesting PMK-R1 key from the R0KH that the STA " ..
+ "used during the Initial Mobility Domain Association."))
+
+ r0kh:depends({ieee80211r="1"})
+ r0kh.rmempty = true
+
+ r1kh = s:taboption("encryption", DynamicList, "r1kh", translate("External R1 Key Holder List"),
+ translate ("List of R1KHs in the same Mobility Domain. "..
+ "<br />Format: MAC-address,R1KH-ID as 6 octets with colons,128-bit key as hex string. "..
+ "<br />This list is used to map R1KH-ID to a destination MAC address " ..
+ "when sending PMK-R1 key from the R0KH. This is also the " ..
+ "list of authorized R1KHs in the MD that can request PMK-R1 keys."))
+ r1kh:depends({ieee80211r="1"})
+ r1kh.rmempty = true
+ -- End of 802.11r options
+
eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
eaptype:value("tls", "TLS")
eaptype:value("ttls", "TTLS")
password.password = true
end
-if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
+-- ieee802.11w options
+if hwtype == "mac80211" then
+ local has_80211w = (os.execute("hostapd -v11w 2>/dev/null || hostapd -veap 2>/dev/null") == 0)
+ if has_80211w then
+ ieee80211w = s:taboption("encryption", ListValue, "ieee80211w",
+ translate("802.11w Management Frame Protection"),
+ translate("Requires the 'full' version of wpad/hostapd " ..
+ "and support from the wifi driver <br />(as of Feb 2017: " ..
+ "ath9k and ath10k, in LEDE also mwlwifi and mt76)"))
+ ieee80211w.default = ""
+ ieee80211w.rmempty = true
+ ieee80211w:value("", translate("Disabled (default)"))
+ ieee80211w:value("1", translate("Optional"))
+ ieee80211w:value("2", translate("Required"))
+ ieee80211w:depends({mode="ap", encryption="wpa2"})
+ ieee80211w:depends({mode="ap-wds", encryption="wpa2"})
+ ieee80211w:depends({mode="ap", encryption="psk2"})
+ ieee80211w:depends({mode="ap", encryption="psk-mixed"})
+ ieee80211w:depends({mode="ap-wds", encryption="psk2"})
+ ieee80211w:depends({mode="ap-wds", encryption="psk-mixed"})
+
+ max_timeout = s:taboption("encryption", Value, "ieee80211w_max_timeout",
+ translate("802.11w maximum timeout"),
+ translate("802.11w Association SA Query maximum timeout"))
+ max_timeout:depends({ieee80211w="1"})
+ max_timeout:depends({ieee80211w="2"})
+ max_timeout.datatype = "uinteger"
+ max_timeout.placeholder = "1000"
+ max_timeout.rmempty = true
+
+ retry_timeout = s:taboption("encryption", Value, "ieee80211w_retry_timeout",
+ translate("802.11w retry timeout"),
+ translate("802.11w Association SA Query retry timeout"))
+ retry_timeout:depends({ieee80211w="1"})
+ retry_timeout:depends({ieee80211w="2"})
+ retry_timeout.datatype = "uinteger"
+ retry_timeout.placeholder = "201"
+ retry_timeout.rmempty = true
+ end
+end
+
+if hwtype == "mac80211" or hwtype == "prism2" then
local wpasupplicant = fs.access("/usr/sbin/wpa_supplicant")
local hostcli = fs.access("/usr/sbin/hostapd_cli")
if hostcli and wpasupplicant then
return
end
-m = SimpleForm("network", translate("Joining Network: %q", http.formvalue("join")))
+m = SimpleForm("network", translatef("Joining Network: %q", http.formvalue("join")))
m.cancel = translate("Back to scan results")
m.reset = false
if iw and iw.mbssid_support then
replace = m:field(Flag, "replace", translate("Replace wireless configuration"),
- translate("An additional network will be created if you leave this checked."))
+ translate("Check this option to delete the existing networks from this radio."))
function replace.cfgvalue() return "0" end
else
return { "_pass" }
end
-function m.on_commit(map)
+function m.parse(map)
local v1 = pw1:formvalue("_pass")
local v2 = pw2:formvalue("_pass")
m.message = translate("Given password confirmation did not match, password not changed!")
end
end
+
+ Map.parse(map)
end
o = mount:taboption("general", Value, "uuid", translate("UUID"),
translate("If specified, mount the device by its UUID instead of a fixed device node"))
+o:value("", translate("-- match by uuid --"))
+
for i, d in ipairs(devices) do
if d.uuid and d.size then
o:value(d.uuid, "%s (%s, %d MB)" %{ d.uuid, d.dev, d.size })
end
end
-o:value("", translate("-- match by label --"))
-
o = mount:taboption("general", Value, "label", translate("Label"),
translate("If specified, mount the device by the partition label instead of a fixed device node"))
+o:value("", translate("-- match by label --"))
+
o:depends("uuid", "")
for i, d in ipairs(devices) do
end
end
-o:value("", translate("-- match by device --"))
-
o = mount:taboption("general", Value, "device", translate("Device"),
translate("The device file of the memory or partition (<abbr title=\"for example\">e.g.</abbr> <code>/dev/sda1</code>)"))
+o:value("", translate("-- match by device --"))
+
o:depends({ uuid = "", label = "" })
for i, d in ipairs(devices) do
local leds = {}
local fs = require "nixio.fs"
-local util = require "nixio.util"
+local nu = require "nixio.util"
+local util = require "luci.util"
if fs.access(sysfs_path) then
- leds = util.consume((fs.dir(sysfs_path)))
+ leds = nu.consume((fs.dir(sysfs_path)))
end
if #leds == 0 then
end
end
+
+usbport = s:option(MultiValue, "port", translate("USB Ports"))
+usbport:depends("trigger", "usbport")
+usbport.rmempty = true
+usbport.widget = "checkbox"
+usbport.cast = "table"
+usbport.size = 1
+
+function usbport.valuelist(self, section)
+ local port, ports = nil, {}
+ for port in util.imatch(m.uci:get("system", section, "port")) do
+ local b, n = port:match("^usb(%d+)-port(%d+)$")
+ if not (b and n) then
+ b, n = port:match("^(%d+)-(%d+)$")
+ end
+ if b and n then
+ ports[#ports+1] = "usb%u-port%u" %{ tonumber(b), tonumber(n) }
+ end
+ end
+ return ports
+end
+
+function usbport.validate(self, value)
+ return type(value) == "string" and { value } or value
+end
+
+
for p in nixio.fs.glob("/sys/bus/usb/devices/[0-9]*/manufacturer") do
local id = p:match("%d+-%d+")
local mf = nixio.fs.readfile("/sys/bus/usb/devices/" .. id .. "/manufacturer") or "?"
usbdev:value(id, "%s (%s - %s)" %{ id, mf, pr })
end
+for p in nixio.fs.glob("/sys/bus/usb/devices/*/usb[0-9]*-port[0-9]*") do
+ local bus, port = p:match("usb(%d+)-port(%d+)")
+ if bus and port then
+ usbport:value("usb%u-port%u" %{ tonumber(bus), tonumber(port) },
+ "Hub %u, Port %u" %{ tonumber(bus), tonumber(port) })
+ end
+end
+
return m
ifc.ip6addrs[i]
);
}
+
+ if (ifc.ip6prefix)
+ {
+ html += String.format('<strong><%:IPv6-PD%>:</strong> %s<br />', ifc.ip6prefix);
+ }
d.innerHTML = html;
}
ifc.ip6addrs[i]
);
}
+
+ if (ifc.ip6prefix)
+ {
+ html += String.format('<strong><%:IPv6-PD%>:</strong> %s<br />', ifc.ip6prefix);
+ }
d.innerHTML = html;
}
return name
- -- madwifi
- elseif name == "ath" or name == "wifi" then
- return translatef("Atheros 802.11%s Wireless Controller", bands)
-
-- ralink
elseif name == "ra" then
return translatef("RaLink 802.11%s Wireless Controller", bands)
{
var c = conn[i];
- if (c.src == '127.0.0.1' && c.dst == '127.0.0.1')
+ if ((c.src == '127.0.0.1' && c.dst == '127.0.0.1')
+ || (c.src == '::1' && c.dst == '::1'))
continue;
var tr = conn_table.rows[0].parentNode.insertRow(-1);
if wan6 then
rv.wan6 = {
- ip6addr = wan6:ip6addr(),
- gw6addr = wan6:gw6addr(),
- dns = wan6:dns6addrs(),
- uptime = wan6:uptime(),
- ifname = wan6:ifname(),
- link = wan6:adminlink()
+ ip6addr = wan6:ip6addr(),
+ gw6addr = wan6:gw6addr(),
+ dns = wan6:dns6addrs(),
+ ip6prefix = wan6:ip6prefix(),
+ uptime = wan6:uptime(),
+ proto = wan6:proto(),
+ ifname = wan6:ifname(),
+ link = wan6:adminlink()
}
end
if (ifc6 && ifc6.ifname && ifc6.proto != 'none')
{
var s = String.format(
- '<strong><%:Address%>: </strong>%s<br />' +
+ '<strong><%:Type%>: </strong>%s%s<br />',
+ ifc6.proto, (ifc6.ip6prefix) ? '-pd' : ''
+ );
+
+ if (!ifc6.ip6prefix)
+ {
+ s += String.format(
+ '<strong><%:Address%>: </strong>%s<br />',
+ (ifc6.ip6addr) ? ifc6.ip6addr : '::'
+ );
+ }
+ else
+ {
+ s += String.format(
+ '<strong><%:Prefix Delegated%>: </strong>%s<br />',
+ ifc6.ip6prefix
+ );
+ if (ifc6.ip6addr)
+ {
+ s += String.format(
+ '<strong><%:Address%>: </strong>%s<br />',
+ ifc6.ip6addr
+ );
+ }
+ }
+
+ s += String.format(
'<strong><%:Gateway%>: </strong>%s<br />',
- (ifc6.ip6addr) ? ifc6.ip6addr : '::',
(ifc6.gw6addr) ? ifc6.gw6addr : '::'
);
<% if upgrade_avail then %>
<form method="post" action="<%=url('admin/system/flashops/sysupgrade')%>" enctype="multipart/form-data">
<input type="hidden" name="token" value="<%=token%>" />
- <div class="cbi-section-descr"><%:Upload a sysupgrade-compatible image here to replace the running firmware. Check "Keep settings" to retain the current configuration (requires an OpenWrt compatible firmware image).%></div>
+ <div class="cbi-section-descr"><%:Upload a sysupgrade-compatible image here to replace the running firmware. Check "Keep settings" to retain the current configuration (requires a compatible firmware image).%></div>
<div class="cbi-section-node">
<div class="cbi-value">
<label class="cbi-value-title" for="keep"><%:Keep settings%>:</label>
<% end %>
</form>
<% else %>
- <div class="cbi-section-descr"><%:Sorry, there is no sysupgrade support present; a new firmware image must be flashed manually. Please refer to the OpenWrt wiki for device specific install instructions.%></div>
+ <div class="cbi-section-descr"><%:Sorry, there is no sysupgrade support present; a new firmware image must be flashed manually. Please refer to the wiki for device specific install instructions.%></div>
<% end %>
</fieldset>
if (strstr(line, "TIME_WAIT"))
continue;
- if (strstr(line, "src=127.0.0.1 ") &&
- strstr(line, "dst=127.0.0.1 "))
+ if ((strstr(line, "src=127.0.0.1 ") && strstr(line, "dst=127.0.0.1 "))
+ || (strstr(line, "src=::1 ") && strstr(line, "dst=::1 ")))
continue;
if (sscanf(line, "%*s %*d %s", ifname) || sscanf(line, "%s %*d", ifname))
local hwtype = m:get(wifidevs[1], "type")
-if hwtype == "atheros" then
- mode = s:option(ListValue, "hwmode", translate("Mode"))
- mode.override_values = true
- mode:value("", "auto")
- mode:value("11b", "802.11b")
- mode:value("11g", "802.11g")
- mode:value("11a", "802.11a")
- mode:value("11bg", "802.11b+g")
- mode.rmempty = true
-end
-
-
ch = s:option(Value, "channel", translate("Channel"))
for i=1, 14 do
ch:value(i, i .. " (2.4 GHz)")
encr:value("none", "No Encryption")
encr:value("wep", "WEP")
-if hwtype == "atheros" or hwtype == "mac80211" then
+if hwtype == "mac80211" then
local supplicant = fs.access("/usr/sbin/wpa_supplicant")
local hostapd = fs.access("/usr/sbin/hostapd")
port.rmempty = true
-if hwtype == "atheros" or hwtype == "mac80211" then
+if hwtype == "mac80211" then
nasid = s:option(Value, "nasid", translate("NAS ID"))
nasid:depends({mode="ap", encryption="wpa"})
nasid:depends({mode="ap", encryption="wpa2"})
end
-if hwtype == "atheros" or hwtype == "broadcom" then
+if hwtype == "broadcom" then
iso = s:option(Flag, "isolate", translate("AP-Isolation"), translate("Prevents Client to Client communication"))
iso.rmempty = true
iso:depends("mode", "ap")
hide:depends("mode", "ap")
end
-if hwtype == "mac80211" or hwtype == "atheros" then
+if hwtype == "mac80211" then
bssid:depends({mode="adhoc"})
end
<p><%_<abbr title="Lua Configuration Interface">LuCI</abbr> is a free, flexible, and user friendly graphical interface for configuring OpenWrt.%><br />
<%:On the following pages you can adjust all important settings of this device.%></p>
<p><%:As we always want to improve this interface we are looking forward to your feedback and suggestions.%></p>
-<p><%:And now have fun with your OpenWrt device!%></p>
+<p><%:And now have fun with your device!%></p>
<p><em><strong><a href="<%=controller%>/about"><%_The <abbr title="Lua Configuration Interface">LuCI</abbr> Team%></a></strong></em></p>
<% if supported then %>
<form method="post" action="<%=REQUEST_URI%>" enctype="multipart/form-data">
<p>
- <%:Upload an OpenWrt image file to reflash the device.%>
+ <%:Upload a sysupgrade-compatible image file to reflash the device.%>
<% if bad_image then %>
<br /><br />
<div class="error"><%:The uploaded image file does not
</form>
<% else %>
<div class="error"><%_ Sorry.
- OpenWrt does not support a system upgrade on this platform.<br />
+ A system upgrade is not supported on this platform.<br />
You need to manually flash your device. %></div>
<% end %>
<% elseif step == 2 then %>
<% end %>
</form>
<% else %>
- <div class="cbi-section-descr"><%:Sorry, there is no sysupgrade support present; a new firmware image must be flashed manually. Please refer to the OpenWrt wiki for device specific install instructions.%></div>
+ <div class="cbi-section-descr"><%:Sorry, there is no sysupgrade support present; a new firmware image must be flashed manually. Please refer to the wiki for device specific install instructions.%></div>
<% end %>
</fieldset>
<input type="hidden" name="confirm" value="1" />
<input type="checkbox" class="cbi-input-checkbox" name="keepcfg" value="1" checked="checked" id="cb_keepcfg" />
+ <label for="cb_keepcfg"></label>
<label for="cb_keepcfg"><%:Keep configuration%></label><br />
<input type="checkbox" class="cbi-input-checkbox" name="verify" value="1" checked="checked" id="cb_verify" />
+ <label for="cb_verify"></label>
<label for="cb_verify"><%:Verify downloaded images%></label><br /><br />
<input type="submit" class="cbi-button cbi-button-apply" value="<%:Confirm Upgrade%>" />
--- /dev/null
+#
+# Copyright (C) 2008-2014 The LuCI Team <luci@lists.subsignal.org>
+#
+# This is free software, licensed under the Apache License, Version 2.0 .
+#
+
+include $(TOPDIR)/rules.mk
+
+LUCI_TITLE:=Support for QMI
+LUCI_DEPENDS:=+uqmi
+
+include ../../luci.mk
+
+# call BuildPackage - OpenWrt buildroot signature
--- /dev/null
+-- Copyright 2016 David Thornley <david.thornley@touchstargroup.com>
+-- Licensed to the public under the Apache License 2.0.
+
+local map, section, net = ...
+
+local device, apn, pincode, username, password
+local auth, ipv6
+
+
+device = section:taboption("general", Value, "device", translate("Modem device"))
+device.rmempty = false
+
+local device_suggestions = nixio.fs.glob("/dev/cdc-wdm*")
+
+if device_suggestions then
+ local node
+ for node in device_suggestions do
+ device:value(node)
+ end
+end
+
+
+apn = section:taboption("general", Value, "apn", translate("APN"))
+
+
+pincode = section:taboption("general", Value, "pincode", translate("PIN"))
+
+
+username = section:taboption("general", Value, "username", translate("PAP/CHAP username"))
+
+
+password = section:taboption("general", Value, "password", translate("PAP/CHAP password"))
+password.password = true
+
+auth = section:taboption("general", Value, "auth", translate("Authentication Type"))
+auth:value("", translate("-- Please choose --"))
+auth:value("both", "PAP/CHAP (both)")
+auth:value("pap", "PAP")
+auth:value("chap", "CHAP")
+auth:value("none", "NONE")
+
+if luci.model.network:has_ipv6() then
+ ipv6 = section:taboption("advanced", Flag, "ipv6", translate("Enable IPv6 negotiation"))
+ ipv6.default = ipv6.disabled
+end
--- /dev/null
+-- Copyright 2016 David Thornley <david.thornley@touchstargroup.com>
+-- Licensed to the public under the Apache License 2.0.
+
+local netmod = luci.model.network
+local interface = luci.model.network.interface
+local proto = netmod:register_protocol("qmi")
+
+function proto.get_i18n(self)
+ return luci.i18n.translate("QMI Cellular")
+end
+
+function proto.ifname(self)
+ local base = netmod._M.protocol
+ local ifname = base.ifname(self) -- call base class "protocol.ifname(self)"
+
+ -- Note: ifname might be nil if the adapter could not be determined through ubus (default name to qmi-wan in this case)
+ if ifname == nil then
+ ifname = "qmi-" .. self.sid
+ end
+ return ifname
+end
+
+function proto.get_interface(self)
+ return interface(self:ifname(), self)
+end
+
+function proto.opkg_package(self)
+ return "uqmi"
+end
+
+function proto.is_installed(self)
+ return nixio.fs.access("/lib/netifd/proto/qmi.sh")
+end
+
+function proto.is_floating(self)
+ return true
+end
+
+function proto.is_virtual(self)
+ return true
+end
+
+function proto.get_interfaces(self)
+ return nil
+end
+
+function proto.contains_interface(self, ifc)
+ return (netmod:ifnameof(ifc) == self:ifname())
+end
+
+netmod:register_pattern_virtual("^qmi-%w")
LUCI_TITLE:=Support for WireGuard VPN
LUCI_DEPENDS:=+kmod-wireguard +wireguard-tools
+LUCI_PKGARCH:=all
PKG_MAINTAINER:=Dan Luedtke <mail@danrl.com>
--- Copyright 2016 Dan Luedtke <mail@danrl.com>
+-- Copyright 2016-2017 Dan Luedtke <mail@danrl.com>
-- Licensed to the public under the Apache License 2.0.
translate("Required. Base64-encoded private key for this interface.")
)
private_key.password = true
-private_key.datatype = "rangelength(44, 44)"
+private_key.datatype = "and(base64,rangelength(44,44))"
private_key.optional = false
listen_port.placeholder = "51820"
listen_port.optional = true
+addresses = section:taboption(
+ "general",
+ DynamicList,
+ "addresses",
+ translate("IP Addresses"),
+ translate("Recommended. IP addresses of the WireGuard interface.")
+)
+addresses.datatype = "ipaddr"
+addresses.optional = true
+
-- advanced --------------------------------------------------------------------
translate("MTU"),
translate("Optional. Maximum Transmission Unit of tunnel interface.")
)
-mtu.datatype = "range(1280,1423)"
-mtu.placeholder = "1423"
+mtu.datatype = "range(1280,1420)"
+mtu.placeholder = "1420"
mtu.optional = true
Value,
"preshared_key",
translate("Preshared Key"),
- translate("Optional. Adds in an additional layer of symmetric-key " ..
+ translate("Optional. Base64-encoded preshared key. " ..
+ "Adds in an additional layer of symmetric-key " ..
"cryptography for post-quantum resistance.")
)
preshared_key.password = true
-preshared_key.datatype = "rangelength(44, 44)"
+preshared_key.datatype = "and(base64,rangelength(44,44))"
preshared_key.optional = true
+fwmark = section:taboption(
+ "advanced",
+ Value,
+ "fwmark",
+ translate("Firewall Mark"),
+ translate("Optional. 32-bit mark for outgoing encrypted packets. " ..
+ "Enter value in hex, starting with <code>0x</code>.")
+)
+fwmark.datatype = "hex(4)"
+fwmark.optional = true
+
+
-- peers -----------------------------------------------------------------------
peers = map:section(
Value,
"public_key",
translate("Public Key"),
- translate("Required. Public key of peer.")
+ translate("Required. Base64-encoded public key of peer.")
)
-public_key.datatype = "rangelength(44, 44)"
+public_key.datatype = "and(base64,rangelength(44,44))"
public_key.optional = false
translate("Optional. Seconds between keep alive messages. " ..
"Default is 0 (disabled). Recommended value if " ..
"this device is behind a NAT is 25."))
-persistent_keepalive.datatype = "range(0, 65535)"
+persistent_keepalive.datatype = "range(0,65535)"
persistent_keepalive.placeholder = "0"
zoom: 1;
}
-form .clearfix:after
+form .clearfix:after,
form .cbi-value:after {
clear: both;
}
select {
padding: initial;
+ background: #fff;
+ box-shadow: inset 0 -1px 3px rgba(0, 0, 0, 0.1);
}
input[type=checkbox], input[type=radio] {
.menu-dropdown li, .dropdown-menu li {
float: none;
display: block;
- background-color: none;
+ background-color: transparent;
}
.menu-dropdown .divider, .dropdown-menu .divider {
color: #808080;
display: inline-block;
font-size: 13px;
- height: 22 dpx;
line-height: 18px;
}
</div>
<%- end -%>
+ <noscript>
+ <div class="alert-message warning">
+ <strong><%:JavaScript required!%></strong><br />
+ <%:You must enable JavaScript in your browser or LuCI will not work properly.%>
+ </div>
+ </noscript>
+
<div id="maincontent" class="container">
<% if category then render_tabmenu(category, cattree) end %>
<% if category ~= "freifunk" and category ~= "splash" then %>
<noscript>
<div class="errorbox">
- <strong><%:Java Script required!%></strong><br />
- <%:You must enable Java Script in your browser or LuCI will not work properly.%>
+ <strong><%:JavaScript required!%></strong><br />
+ <%:You must enable JavaScript in your browser or LuCI will not work properly.%>
</div>
</noscript>
<% end %>
</div>
<footer class="mobile-hide">
<a href="https://github.com/openwrt/luci">Powered by <%= ver.luciname %> (<%= ver.luciversion %>)</a> /
- <a href="https://openwrt.org/"><%= ver.distversion %></a>
+ <%= ver.distversion %>
<% if #categories > 1 then %>
<ul class="breadcrumb pull-right" id="modemenu">
<% for i, r in ipairs(categories) do %>
<div id="maincontent">
<noscript>
<div class="errorbox">
- <strong><%:Java Script required!%></strong><br />
- <%:You must enable Java Script in your browser or LuCI will not work properly.%>
+ <strong><%:JavaScript required!%></strong><br />
+ <%:You must enable JavaScript in your browser or LuCI will not work properly.%>
</div>
</noscript>
projects / project / luci.git / commitdiff
