rm -f /etc/config/wireless
/sbin/wifi detect > /etc/config/wireless
}
+
+ scan_interfaces
+
+ local ifc
+ for ifc in $interfaces; do
+ local proto
+ config_get proto "$ifc" proto
+
+ type "coldplug_interface_$proto" >/dev/null && \
+ coldplug_interface_$proto "$ifc"
+ done
}
start() {
return 1
}
+# add dns entries if they are not in resolv.conf yet
+add_dns() {
+ local cfg="$1"; shift
+
+ local dns
+ local add
+ for dns in "$@"; do
+ grep -qsF "nameserver $dns" /tmp/resolv.conf.auto || {
+ add="${add:+$add }$dns"
+ echo "nameserver $dns" >> /tmp/resolv.conf.auto
+ }
+ done
+
+ uci_set_state network "$cfg" dns "$add"
+}
+
+# remove dns entries of the given iface
+remove_dns() {
+ local cfg="$1"
+
+ local dns
+ config_get dns "$cfg" dns
+ for dns in $dns; do
+ sed -i -e "/^nameserver $dns$/d" /tmp/resolv.conf.auto
+ done
+
+ uci_revert_state network "$cfg" dns
+}
+
# sort the device list, drop duplicates
sort_list() {
local arg="$*"
}
set_interface_ifname "$config" "$iface_main"
- pidfile="/var/run/$iface_main.pid"
[ -n "$proto" ] || config_get proto "$config" proto
case "$proto" in
static)
setup_interface_static "$iface_main" "$config"
;;
dhcp)
+ local lockfile="/var/lock/dhcp-$iface_main"
+ lock "$lockfile"
+
# prevent udhcpc from starting more than once
- lock "/var/lock/dhcp-$iface_main"
+ local pidfile="/var/run/dhcp-${iface_main}.pid"
local pid="$(cat "$pidfile" 2>/dev/null)"
- if [ -d "/proc/$pid" ] && grep udhcpc "/proc/${pid}/cmdline" >/dev/null 2>/dev/null; then
- lock -u "/var/lock/dhcp-$iface_main"
+ if [ -d "/proc/$pid" ] && grep -qs udhcpc "/proc/${pid}/cmdline"; then
+ lock -u "$lockfile"
else
local ipaddr netmask hostname proto1 clientid
config_get ipaddr "$config" ipaddr
local dhcpopts
[ ."$proto1" != ."$proto" ] && dhcpopts="-n -q"
$DEBUG eval udhcpc -t 0 -i "$iface_main" ${ipaddr:+-r $ipaddr} ${hostname:+-H $hostname} ${clientid:+-c $clientid} -b -p "$pidfile" ${dhcpopts:- -O rootpath -R &}
- lock -u "/var/lock/dhcp-$iface_main"
+ lock -u "$lockfile"
fi
;;
none)
stop_interface_dhcp() {
local config="$1"
+
+ local iface
+ config_get ifname "$config" ifname
+
+ local lock="/var/lock/dhcp-${ifname}"
+ [ -f "$lock" ] && lock -u "$lock"
+
+ local pidfile="/var/run/dhcp-${ifname}.pid"
+ local pid="$(cat "$pidfile" 2>/dev/null)"
+ [ -d "/proc/$pid" ] && {
+ grep -qs udhcpc "/proc/$pid/cmdline" && kill -TERM $pid && \
+ while grep -qs udhcpc "/proc/$pid/cmdline"; do sleep 1; done
+ rm -f "$pidfile"
+ }
+
uci -P /var/state revert "network.$config"
}
# call interface stop handler
( type "stop_interface_$proto" ) >/dev/null 2>/dev/null && eval "stop_interface_$proto '$cfg'"
-# make sure all locks are removed
-for lock in "/var/lock/dhcp-$iface" "/var/lock/ppp-$iface"; do
- [ -f "$lock" ] && {
- lock -u "$lock"
- sleep 1
- }
-done
-
-# kill active ppp daemon and other processes
-config_get ifname "$cfg" ifname
-pids="$(head -n1 -q /var/run/${ifname}.pid /var/run/ppp-${cfg}.pid 2>/dev/null)"
-for pid in $pids; do
- [ -d "/proc/$pid" ] && {
- kill $pid
- [ -d "/proc/$pid" ] && {
- sleep 1
- kill -9 $pid 2>/dev/null >/dev/null
- }
- }
-done
-rm -f /var/run/${ifname}.pid /var/run/ppp-${cfg}.pid
-
config_get ifname "$cfg" ifname
config_get device "$cfg" device
PKG_NAME:=comgt
PKG_VERSION:=0.32
-PKG_RELEASE:=1
+PKG_RELEASE:=2
PKG_SOURCE:=$(PKG_NAME).$(PKG_VERSION).tgz
PKG_SOURCE_URL:=@SF/comgt
scan_3g() {
local device
-
- scan_ppp "$@"
config_get device "$1" device
# try to figure out the device if it's invalid
}
# enable 3G with the 3G button by default
+ local button
config_get button "$1" button
[ -z "$button" ] && {
config_set "$1" button 1
}
stop_interface_3g() {
+ stop_interface_ppp "$1"
set_3g_led 0 0 0
killall gcom >/dev/null 2>/dev/null
}
local iface="$1"
local config="$2"
local chat="/etc/chatscripts/3g.chat"
-
+
+ local device
config_get device "$config" device
+
+ local maxwait
config_get maxwait "$config" maxwait
maxwait=${maxwait:-20}
while [ ! -e "$device" -a $maxwait -gt 0 ];do # wait for driver loading to catch up
/sbin/insmod $module 2>&- >&-
done
+ local apn
config_get apn "$config" apn
+
+ local service
config_get service "$config" service
+
+ local pincode
config_get pincode "$config" pincode
+
+ local mtu
config_get mtu "$config" mtu
set_3g_led 1 0 1
mode="AT_OPSYS=${CODE}"
fi
# Don't assume Option to be default as it breaks with Huawei Cards/Sticks
-
+
PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
echo "$config(3g): Failed to set the PIN code."
set_3g_led 0 0 0
PKG_NAME:=ppp
PKG_VERSION:=2.4.4
-PKG_RELEASE:=6
+PKG_RELEASE:=7
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=ftp://ftp.samba.org/pub/ppp/
$(INSTALL_BIN) ./files/etc/ppp/ipv6-up $(1)/etc/ppp/
$(INSTALL_BIN) ./files/etc/ppp/ipv6-down $(1)/etc/ppp/
$(INSTALL_DATA) ./files/etc/ppp/options $(1)/etc/ppp/
- ln -sf /tmp/resolv.conf.auto $(1)/etc/ppp/resolv.conf
+ ln -sf /tmp/resolv.conf.ppp $(1)/etc/ppp/resolv.conf
endef
define Package/ppp-mod-pppoa/install
$(1)/usr/lib/pppd/$(PKG_VERSION)/
$(INSTALL_DIR) $(1)/lib/network
$(INSTALL_BIN) ./files/pppoa.sh $(1)/lib/network/
+ $(INSTALL_DIR) $(1)/etc/hotplug.d/atm
+ $(INSTALL_DATA) ./files/etc/hotplug.d/atm/20-atm-modem $(1)/etc/hotplug.d/atm/
endef
define Package/ppp-mod-pppoe/install
--- /dev/null
+#!/bin/sh
+
+if [ "$ACTION" = "add" ]; then
+ include /lib/network
+ scan_interfaces
+
+ local found=0
+ local ifc
+ for ifc in $interfaces; do
+ local up
+ config_get_bool up "$ifc" up 0
+
+ local proto
+ config_get proto "$ifc" proto
+
+ if [ "$proto" = "pppoa" ] && [ "$up" != 1 ]; then
+ found=1
+ ( sleep 1; ifup "$ifc" ) &
+ fi
+ done
+
+ if [ "$found" != 1 ]; then
+ logger "Found no matching interface for DSL device $DEVICENAME"
+ fi
+fi
#!/bin/sh
+
. /etc/functions.sh
+. /lib/network/config.sh
+
PPP_IFACE="$1"
PPP_TTY="$2"
PPP_SPEED="$3"
PPP_LOCAL="$4"
PPP_REMOTE="$5"
PPP_IPPARAM="$(echo $6 | sed 's/\./_/g')"
-PPP_UNIT="${PPP_IFACE##ppp}"
export PPP_IFACE PPP_TTY PPP_SPEED PPP_LOCAL PPP_REMOTE PPP_IPPARAM
[ -z "$PPP_IPPARAM" -o -z "$PPP_LOCAL" ] || {
- uci_set_state network "$PPP_IPPARAM" unit "$PPP_UNIT"
+ uci_set_state network "$PPP_IPPARAM" ifname "$PPP_IFACE"
uci_set_state network "$PPP_IPPARAM" ipaddr "$PPP_LOCAL"
uci_set_state network "$PPP_IPPARAM" gateway "$PPP_REMOTE"
local dns="$DNS1${DNS2:+ $DNS2}"
- [ -n "$dns" ] && uci_set_state network "$PPP_IPPARAM" dns "$dns"
+ [ -n "$dns" ] && add_dns "$PPP_IPPARAM" $dns
}
+
[ -z "$PPP_IPPARAM" ] || env -i ACTION="ifup" INTERFACE="$PPP_IPPARAM" DEVICE="$PPP_IFACE" PROTO=ppp /sbin/hotplug-call "iface"
[ -d /etc/ppp/ip-up.d ] && {
-scan_ppp() {
- config_get ifname "$1" ifname
- pppdev="${pppdev:-0}"
- config_get devunit "$1" unit
- {
- unit=
- pppif=
- if [ ! -d /tmp/.ppp-counter ]; then
- mkdir -p /tmp/.ppp-counter
- fi
- local maxunit
- maxunit="$(cat /tmp/.ppp-counter/max-unit 2>/dev/null)"
- if [ -z "$maxunit" ]; then
- maxunit=-1
- fi
- local i
- i=0
- while [ $i -le $maxunit ]; do
- local unitdev
- unitdev="$(cat /tmp/.ppp-counter/ppp${i} 2>/dev/null)"
- if [ "$unitdev" = "$1" ]; then
- unit="$i"
- pppif="ppp${i}"
- break
- fi
- i="$(($i + 1))"
- done
- if [ -z "$unit" ] || [ -z "$pppif" ]; then
- maxunit="$(($maxunit + 1))"
- if [ -n "$devunit" ]; then
- unit="$devunit"
- elif [ "${ifname%%[0-9]*}" = ppp ]; then
- unit="${ifname##ppp}"
- else
- unit="$maxunit"
- fi
- [ "$maxunit" -lt "$unit" ] && maxunit="$unit"
- pppif="ppp${unit}"
- echo "$1" >/tmp/.ppp-counter/$pppif 2>/dev/null
- echo "$maxunit" >/tmp/.ppp-counter/max-unit 2>/dev/null
- fi
- config_set "$1" ifname "ppp$unit"
- config_set "$1" unit "$unit"
+stop_interface_ppp() {
+ local cfg="$1"
+
+ local proto
+ config_get proto "$cfg" proto
+
+ local link="$proto-$cfg"
+ [ -f "/var/run/ppp-${link}.pid" ] && {
+ local pid="$(head -n1 /var/run/ppp-${link}.pid 2>/dev/null)"
+ local try=0
+ grep -qs pppd "/proc/$pid/cmdline" && kill -TERM $pid && \
+ while grep -qs pppd "/proc/$pid/cmdline" && [ $((try++)) -lt 5 ]; do sleep 1; done
+ grep -qs pppd "/proc/$pid/cmdline" && kill -KILL $pid && \
+ while grep -qs pppd "/proc/$pid/cmdline"; do sleep 1; done
+ rm -f "/var/run/ppp-${link}.pid"
}
+
+ remove_dns "$cfg"
+
+ local lock="/var/lock/ppp-$link"
+ [ -f "$lock" ] && lock -u "$lock"
}
start_pppd() {
local cfg="$1"; shift
- local ifname
- # make sure the network state references the correct ifname
- scan_ppp "$cfg"
- config_get ifname "$cfg" ifname
- set_interface_ifname "$cfg" "$ifname"
+ local proto
+ config_get proto "$cfg" proto
+
+ # unique link identifier
+ local link="${proto:-ppp}-$cfg"
# make sure only one pppd process is started
- lock "/var/lock/ppp-${cfg}"
- local pid="$(head -n1 /var/run/ppp-${cfg}.pid 2>/dev/null)"
+ lock "/var/lock/ppp-${link}"
+ local pid="$(head -n1 /var/run/ppp-${link}.pid 2>/dev/null)"
[ -d "/proc/$pid" ] && grep pppd "/proc/$pid/cmdline" 2>/dev/null >/dev/null && {
- lock -u "/var/lock/ppp-${cfg}"
+ lock -u "/var/lock/ppp-${link}"
return 0
}
local device
config_get device "$cfg" device
- local unit
- config_get unit "$cfg" unit
-
local username
config_get username "$cfg" username
local defaultroute
config_get_bool defaultroute "$cfg" defaultroute 1
- [ "$defaultroute" -eq 1 ] && defaultroute="defaultroute replacedefaultroute" || defaultroute=""
+ [ "$defaultroute" -eq 1 ] && \
+ defaultroute="defaultroute replacedefaultroute" || defaultroute="nodefaultroute"
local interval="${keepalive##*[, ]}"
[ "$interval" != "$keepalive" ] || interval=5
local peerdns
config_get_bool peerdns "$cfg" peerdns $peer_default
- echo -n "" > /tmp/resolv.conf.auto
-
[ "$peerdns" -eq 1 ] && {
peerdns="usepeerdns"
} || {
peerdns=""
- for dns in $dns; do
- echo "nameserver $dns" >> /tmp/resolv.conf.auto
- done
+ add_dns "$cfg" $dns
}
local demand
local demandargs
[ "$demand" -eq 1 ] && {
demandargs="precompiled-active-filter /etc/ppp/filter demand idle"
- [ "$has_dns" -eq 0 ] && \
- echo "nameserver 1.1.1.1" > /tmp/resolv.conf.auto
+ [ "$has_dns" -eq 0 ] && add_dns "$cfg" 1.1.1.1
} || {
demandargs="persist"
}
config_get_bool ipv6 "$cfg" ipv6 0
[ "$ipv6" -eq 1 ] && ipv6="+ipv6" || ipv6=""
- /usr/sbin/pppd "$@" \
+ start-stop-daemon -S -b -x /usr/sbin/pppd -m -p /var/run/ppp-$link.pid -- "$@" \
${keepalive:+lcp-echo-interval $interval lcp-echo-failure ${keepalive%%[, ]*}} \
$demandargs \
$peerdns \
$defaultroute \
${username:+user "$username" password "$password"} \
- unit "$unit" \
- linkname "$cfg" \
ipparam "$cfg" \
+ ifname "$link" \
${connect:+connect "$connect"} \
${disconnect:+disconnect "$disconnect"} \
${ipv6} \
- ${pppd_options}
+ ${pppd_options} \
+ nodetach
- lock -u "/var/lock/ppp-${cfg}"
+ lock -u "/var/lock/ppp-${link}"
}
setup_interface_ppp() {
-scan_pppoa() {
- scan_ppp "$@"
+stop_interface_pppoa() {
+ stop_interface_ppp "$1"
}
setup_interface_pppoa() {
local iface="$1"
local config="$2"
-
+
+ local device
config_get device "$config" device
+
+ local vpi
config_get vpi "$config" vpi
+
+ local vci
config_get vci "$config" vci
for module in slhc ppp_generic pppoatm; do
/sbin/insmod $module 2>&- >&-
done
-
+
+ local encaps
config_get encaps "$config" encaps
+
case "$encaps" in
- 1|vc) ENCAPS="vc-encaps" ;;
- *) ENCAPS="llc-encaps" ;;
+ 1|vc) encaps="vc-encaps" ;;
+ *) encaps="llc-encaps" ;;
esac
+ local mtu
config_get mtu "$config" mtu
mtu=${mtu:-1500}
+
start_pppd "$config" \
- plugin pppoatm.so ${vpi:-8}.${vci:-35} ${ENCAPS} \
+ plugin pppoatm.so ${vpi:-8}.${vci:-35} ${encaps} \
mtu $mtu mru $mtu
}
-scan_pppoe() {
- scan_ppp "$@"
+stop_interface_pppoe() {
+ stop_interface_ppp "$1"
}
setup_interface_pppoe() {
--- /dev/null
+--- a/pppd/main.c
++++ b/pppd/main.c
+@@ -742,8 +742,11 @@ void
+ set_ifunit(iskey)
+ int iskey;
+ {
+- info("Using interface %s%d", PPP_DRV_NAME, ifunit);
+- slprintf(ifname, sizeof(ifname), "%s%d", PPP_DRV_NAME, ifunit);
++ if (use_ifname[0] == 0)
++ slprintf(ifname, sizeof(ifname), "%s%d", PPP_DRV_NAME, ifunit);
++ else
++ slprintf(ifname, sizeof(ifname), "%s", use_ifname);
++ info("Using interface %s", ifname);
+ script_setenv("IFNAME", ifname, iskey);
+ if (iskey) {
+ create_pidfile(getpid()); /* write pid to file */
+--- a/pppd/options.c
++++ b/pppd/options.c
+@@ -111,6 +111,7 @@ int log_to_fd = 1; /* send log messages
+ bool log_default = 1; /* log_to_fd is default (stdout) */
+ int maxfail = 10; /* max # of unsuccessful connection attempts */
+ char linkname[MAXPATHLEN]; /* logical name for link */
++char use_ifname[IFNAMSIZ]; /* physical name for PPP link */
+ bool tune_kernel; /* may alter kernel settings */
+ int connect_delay = 1000; /* wait this many ms after connect script */
+ int req_unit = -1; /* requested interface unit */
+@@ -264,6 +265,9 @@ option_t general_options[] = {
+ { "linkname", o_string, linkname,
+ "Set logical name for link",
+ OPT_PRIO | OPT_PRIV | OPT_STATIC, NULL, MAXPATHLEN },
++ { "ifname", o_string, use_ifname,
++ "Set physical name for PPP interface",
++ OPT_PRIO | OPT_PRIV | OPT_STATIC, NULL, IFNAMSIZ },
+
+ { "maxfail", o_int, &maxfail,
+ "Maximum number of unsuccessful connection attempts to allow",
+--- a/pppd/pppd.h
++++ b/pppd/pppd.h
+@@ -71,6 +71,10 @@
+ #include "eui64.h"
+ #endif
+
++#ifndef IFNAMSIZ
++#define IFNAMSIZ 16
++#endif
++
+ /*
+ * Limits.
+ */
+@@ -308,6 +312,7 @@ extern char *record_file; /* File to rec
+ extern bool sync_serial; /* Device is synchronous serial device */
+ extern int maxfail; /* Max # of unsuccessful connection attempts */
+ extern char linkname[MAXPATHLEN]; /* logical name for link */
++extern char use_ifname[IFNAMSIZ]; /* physical name for PPP interface */
+ extern bool tune_kernel; /* May alter kernel settings as necessary */
+ extern int connect_delay; /* Time to delay after connect script */
+ extern int max_data_rate; /* max bytes/sec through charshunt */
+--- a/pppd/sys-linux.c
++++ b/pppd/sys-linux.c
+@@ -168,6 +168,10 @@ struct in6_ifreq {
+ /* We can get an EIO error on an ioctl if the modem has hung up */
+ #define ok_error(num) ((num)==EIO)
+
++#if !defined(PPP_DRV_NAME)
++#define PPP_DRV_NAME "ppp"
++#endif /* !defined(PPP_DRV_NAME) */
++
+ static int tty_disc = N_TTY; /* The TTY discipline */
+ static int ppp_disc = N_PPP; /* The PPP discpline */
+ static int initfdflags = -1; /* Initial file descriptor flags for fd */
+@@ -622,7 +626,8 @@ void generic_disestablish_ppp(int dev_fd
+ */
+ static int make_ppp_unit()
+ {
+- int x, flags;
++ struct ifreq ifr;
++ int x, flags, s;
+
+ if (ppp_dev_fd >= 0) {
+ dbglog("in make_ppp_unit, already had /dev/ppp open?");
+@@ -645,6 +650,32 @@ static int make_ppp_unit()
+ }
+ if (x < 0)
+ error("Couldn't create new ppp unit: %m");
++
++ if (use_ifname[0] != 0) {
++ s = socket(PF_INET, SOCK_DGRAM, 0);
++ if (s < 0)
++ s = socket(PF_PACKET, SOCK_DGRAM, 0);
++ if (s < 0)
++ s = socket(PF_INET6, SOCK_DGRAM, 0);
++ if (s < 0)
++ s = socket(PF_UNIX, SOCK_DGRAM, 0);
++ if (s >= 0) {
++ slprintf(ifr.ifr_name, sizeof(ifr.ifr_name), "%s%d", PPP_DRV_NAME, ifunit);
++ slprintf(ifr.ifr_newname, sizeof(ifr.ifr_newname), "%s", use_ifname);
++ x = ioctl(s, SIOCSIFNAME, &ifr);
++ close(s);
++ } else {
++ x = s;
++ }
++ if (x < 0) {
++ error("Couldn't rename %s to %s", ifr.ifr_name, ifr.ifr_newname);
++ close(ppp_dev_fd);
++ ppp_dev_fd = -1;
++ } else {
++ info("Renamed %s to %s", ifr.ifr_name, ifr.ifr_newname);
++ }
++ }
++
+ return x;
+ }
+
+--- a/pppstats/pppstats.c
++++ b/pppstats/pppstats.c
+@@ -506,10 +506,12 @@ main(argc, argv)
+ if (argc > 0)
+ interface = argv[0];
+
++/*
+ if (sscanf(interface, PPP_DRV_NAME "%d", &unit) != 1) {
+ fprintf(stderr, "%s: invalid interface '%s' specified\n",
+ progname, interface);
+ }
++*/
+
+ #ifndef STREAMS
+ {
include $(TOPDIR)/rules.mk
PKG_NAME:=pptp
-PKG_VERSION:=1.6.0
-PKG_RELEASE:=6
+PKG_VERSION:=1.7.1
+PKG_RELEASE:=2
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=@SF/pptpclient
-PKG_MD5SUM:=9a706327fb9827541d7c86d48ceb9631
+PKG_MD5SUM:=b47735ba5d6d37dfdbccb85afc044ede
include $(INCLUDE_DIR)/package.mk
+++ /dev/null
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=41
-STOP=30
-
-updown_pptp_interface () {
- config_get proto "$1" proto
- if [ "$proto" = "pptp" ]; then
- if$2 "$1"
- fi
-}
-
-boot () {
- start
-}
-
-start() {
- config_load network
- config_foreach updown_pptp_interface interface up
-}
-
-restart() {
- config_load network
- config_foreach updown_pptp_interface interface down
- config_foreach updown_pptp_interface interface up
-}
-
-stop() {
- config_load network
- config_foreach updown_pptp_interface interface down
-}
-
-scan_pptp() {
- scan_ppp "$@"
-}
-
find_gw() {
route -n | awk '$1 == "0.0.0.0" { print $2; exit }'
}
+stop_interface_pptp() {
+ stop_interface_ppp "$1"
+}
+
+coldplug_interface_pptp() {
+ setup_interface_pptp "pptp-$1" "$1"
+}
setup_interface_pptp() {
local config="$2"
local ifname
-
+
+ local device
config_get device "$config" device
+
+ local ipproto
config_get ipproto "$config" ipproto
+
+ local server
config_get server "$config" server
+ local buffering
+ config_get_bool buffering "$config" buffering 1
+ [ "$buffering" == 0 ] && buffering="--nobuffer" || buffering=
+
for module in slhc ppp_generic ppp_async ip_gre; do
/sbin/insmod $module 2>&- >&-
done
setup_interface "$device" "$config" "${ipproto:-dhcp}"
local gw="$(find_gw)"
[ -n "$gw" ] && {
- route delete "$server" 2>/dev/null >/dev/null
+ [ "$gw" != 0.0.0.0 ] && route delete "$server" 2>/dev/null >/dev/null
route add "$server" gw "$gw"
}
config_get netmask "$config" netmask
[ -z "$netmask" -o -z "$device" ] || ifconfig $device netmask $netmask
- # make sure the network state references the correct ifname
- scan_ppp "$config"
- config_get ifname "$config" ifname
- uci_set_state network "$config" ifname "$ifname"
-
config_get mtu "$config" mtu
mtu=${mtu:-1452}
start_pppd "$config" \
- pty "/usr/sbin/pptp $server --loglevel 0 --nolaunchpppd" \
+ pty "/usr/sbin/pptp $server --loglevel 0 --nolaunchpppd $buffering" \
file /etc/ppp/options.pptp \
mtu $mtu mru $mtu
}
projects / 10.03 / openwrt.git / commitdiff