+++ /dev/null
-#
-# Copyright (C) 2006-2013 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=tinyproxy
-PKG_VERSION:=1.8.3
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:=http://www.banu.com/pub/tinyproxy/1.8/
-PKG_MD5SUM:=292ac51da8ad6ae883d4ebf56908400d
-
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/tinyproxy
- SUBMENU:=Web Servers/Proxies
- SECTION:=net
- CATEGORY:=Network
- TITLE:=Tinyproxy is a lightweight HTTP and HTTPS proxy
- URL:=http://tinyproxy.sourceforge.net/
-endef
-
-define Package/tinyproxy/conffiles
-/etc/config/tinyproxy
-endef
-
-CONFIGURE_ARGS+= \
- --enable-filter \
- --enable-transparent \
- --disable-regexcheck \
-
-define Package/tinyproxy/install
- $(INSTALL_DIR) $(1)/usr/sbin
- $(CP) $(PKG_INSTALL_DIR)/usr/sbin/tinyproxy $(1)/usr/sbin/
- $(INSTALL_DIR) $(1)/usr/share/tinyproxy
- $(CP) $(PKG_INSTALL_DIR)/usr/share/tinyproxy/*.html $(1)/usr/share/tinyproxy/
- $(INSTALL_DIR) $(1)/etc/config
- $(INSTALL_CONF) ./files/tinyproxy.config $(1)/etc/config/tinyproxy
- $(INSTALL_DIR) $(1)/etc/init.d
- $(INSTALL_BIN) ./files/tinyproxy.init $(1)/etc/init.d/tinyproxy
-endef
-
-$(eval $(call BuildPackage,tinyproxy))
+++ /dev/null
-config tinyproxy
-
-#
-# Enable the proxy
-#
-option enabled 0
-
-#
-# Name of the user the tinyproxy daemon should switch to after the port
-# has been bound.
-#
-option User nobody
-option Group nogroup
-
-#
-# Port to listen on.
-#
-option Port 8888
-
-#
-# If you have multiple interfaces this allows you to bind to only one. If
-# this is commented out, tinyproxy will bind to all interfaces present.
-#
-#option Listen 192.168.0.1
-
-#
-# The Bind directive allows you to bind the outgoing connections to a
-# particular IP address.
-#
-#option Bind 192.168.0.1
-
-#
-# Timeout: The number of seconds of inactivity a connection is allowed to
-# have before it closed by tinyproxy.
-#
-option Timeout 600
-
-#
-# ErrorFile: Defines the HTML file to send when a given HTTP error
-# occurs. You will probably need to customize the location to your
-# particular install. The usual locations to check are:
-# /usr/local/share/tinyproxy
-# /usr/share/tinyproxy
-# /etc/tinyproxy
-#
-#option ErrorFile_404 "/usr/share/tinyproxy/404.html"
-#option ErrorFile_400 "/usr/share/tinyproxy/400.html"
-#option ErrorFile_503 "/usr/share/tinyproxy/503.html"
-#option ErrorFile_403 "/usr/share/tinyproxy/403.html"
-#option ErrorFile_408 "/usr/share/tinyproxy/408.html"
-
-#
-# DefaultErrorFile: The HTML file that gets sent if there is no
-# HTML file defined with an ErrorFile keyword for the HTTP error
-# that has occured.
-#
-option DefaultErrorFile "/usr/share/tinyproxy/default.html"
-
-#
-# StatFile: The HTML file that gets sent when a request is made
-# for the stathost. If this file doesn't exist a basic page is
-# hardcoded in tinyproxy.
-#
-option StatFile "/usr/share/tinyproxy/stats.html"
-
-#
-# Where to log the information. Either LogFile or Syslog should be set,
-# but not both.
-#
-option LogFile "/var/log/tinyproxy.log"
-#option Syslog 1
-
-#
-# Set the logging level. Allowed settings are:
-# Critical (least verbose)
-# Error
-# Warning
-# Notice
-# Connect (to log connections without Info's noise)
-# Info (most verbose)
-# The LogLevel logs from the set level and above. For example, if the LogLevel
-# was set to Warning, than all log messages from Warning to Critical would be
-# output, but Notice and below would be suppressed.
-#
-option LogLevel Info
-
-#
-# Include the X-Tinyproxy header, which has the client's IP address when
-# connecting to the sites listed.
-#
-# list XTinyproxy mydomain.com
-
-#
-# This is the absolute highest number of threads which will be created. In
-# other words, only MaxClients number of clients can be connected at the
-# same time.
-#
-option MaxClients 100
-
-#
-# These settings set the upper and lower limit for the number of
-# spare servers which should be available. If the number of spare servers
-# falls below MinSpareServers then new ones will be created. If the number
-# of servers exceeds MaxSpareServers then the extras will be killed off.
-#
-option MinSpareServers 5
-option MaxSpareServers 20
-
-#
-# Number of servers to start initially.
-#
-option StartServers 10
-
-#
-# MaxRequestsPerChild is the number of connections a thread will handle
-# before it is killed. In practise this should be set to 0, which disables
-# thread reaping. If you do notice problems with memory leakage, then set
-# this to something like 10000
-#
-option MaxRequestsPerChild 0
-
-#
-# The following is the authorization controls. If there are any access
-# control keywords then the default action is to DENY. Otherwise, the
-# default action is ALLOW.
-#
-# Also the order of the controls are important. The incoming connections
-# are tested against the controls based on order.
-#
-list Allow 127.0.0.1
-#list Allow 192.168.0.0/16
-#list Allow 172.16.0.0/12
-#list Allow 10.0.0.0/8
-
-#
-# The "Via" header is required by the HTTP RFC, but using the real host name
-# is a security concern. If the following directive is enabled, the string
-# supplied will be used as the host name in the Via header; otherwise, the
-# server's host name will be used.
-#
-option ViaProxyName "tinyproxy"
-
-#
-# The location of the filter file.
-#
-#option Filter "/etc/tinyproxy/filter"
-
-#
-# Filter based on URLs rather than domains.
-#
-#option FilterURLs 1
-
-#
-# Use POSIX Extended regular expressions rather than basic.
-#
-#option FilterExtended 1
-
-#
-# Use case sensitive regular expressions.
-#
-#option FilterCaseSensitive 1
-
-#
-# Change the default policy of the filtering system. If this directive is
-# commented out, or is set to "0" then the default policy is to allow
-# everything which is not specifically denied by the filter file.
-#
-# However, by setting this directive to "1" the default policy becomes to
-# deny everything which is _not_ specifically allowed by the filter file.
-#
-#option FilterDefaultDeny 1
-
-#
-# If an Anonymous keyword is present, then anonymous proxying is enabled.
-# The headers listed are allowed through, while all others are denied. If
-# no Anonymous keyword is present, then all header are allowed through.
-# You must include quotes around the headers.
-#
-#list Anonymous "Host"
-#list Anonymous "Authorization"
-
-#
-# This is a list of ports allowed by tinyproxy when the CONNECT method
-# is used. To disable the CONNECT method altogether, set the value to 0.
-# If no ConnectPort line is found, all ports are allowed (which is not
-# very secure.)
-#
-# The following two ports are used by SSL.
-#
-list ConnectPort 443
-list ConnectPort 563
-
-#
-# Turns on upstream proxy support.
-#
-# The upstream rules allow you to selectively route upstream connections
-# based on the host/domain of the site being accessed.
-#
-# For example:
-# # connection to test domain goes through testproxy
-#
-#config upstream
-# option type proxy
-# option via testproxy:8008
-# option target ".test.domain.invalid"
-#
-#config upstream
-# option type proxy
-# option via testproxy:8008
-# option target ".our_testbed.example.com"
-#
-#config upstream
-# option type proxy
-# option via testproxy:8008
-# option target "192.168.128.0/255.255.254.0"
-#
-# # no upstream proxy for internal websites and unqualified hosts
-#
-#config upstream
-# option type reject
-# option target ".internal.example.com"
-#
-#config upstream
-# option type reject
-# option target "www.example.com"
-#
-#config upstream
-# option type reject
-# option target "10.0.0.0/8"
-#
-#config upstream
-# option type reject
-# option target "192.168.0.0/255.255.254.0"
-#
-#config upstream
-# option type reject
-# option target "."
-#
-# # default upstream is internet firewall
-#
-#config upstream
-# option type proxy
-# option via firewall.internal.example.com:80
-#
-# The LAST matching rule wins the route decision. As you can see, you
-# can use a host, or a domain:
-# name matches host exactly
-# .name matches any host in domain "name"
-# . matches any host with no domain (in 'empty' domain)
-# IP/bits matches network/mask
-# IP/mask matches network/mask
+++ /dev/null
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2008-2011 OpenWrt.org
-
-START=50
-
-CFGFILE=/var/etc/tinyproxy.conf
-
-section_enabled() {
- config_get_bool enabled "$1" 'enabled' 0
- [ $enabled -gt 0 ]
-}
-
-start() {
- config_load 'tinyproxy'
- config_foreach start_proxy 'tinyproxy'
-}
-
-stop() {
- service_stop /usr/sbin/tinyproxy
-}
-
-start_proxy() {
- section_enabled "$1" || return 1
-
- mkdir -m0755 -p /var/etc
- echo '### AUTOGENERATED CONFIGURATION' > $CFGFILE
- echo '### DO NOT EDIT' >> $CFGFILE
- echo '### SEE /etc/config/tinyproxy INSTEAD' >> $CFGFILE
- echo '' >> $CFGFILE
-
- proxy_atom "$1" User >> $CFGFILE
- proxy_atom "$1" Group >> $CFGFILE
- proxy_atom "$1" Port 8888 >> $CFGFILE
- proxy_atom "$1" Listen >> $CFGFILE
- proxy_atom "$1" Bind >> $CFGFILE
- proxy_atom "$1" Timeout >> $CFGFILE
-
- proxy_string "$1" ErrorFile_400 "ErrorFile 400" >> $CFGFILE
- proxy_string "$1" ErrorFile_403 "ErrorFile 403" >> $CFGFILE
- proxy_string "$1" ErrorFile_404 "ErrorFile 404" >> $CFGFILE
- proxy_string "$1" ErrorFile_408 "ErrorFile 408" >> $CFGFILE
- proxy_string "$1" ErrorFile_503 "ErrorFile 503" >> $CFGFILE
-
- proxy_string "$1" DefaultErrorFile >> $CFGFILE
- proxy_string "$1" StatHost StatHost 127.0.0.1 >> $CFGFILE
- proxy_string "$1" StatFile >> $CFGFILE
- proxy_string "$1" LogFile >> $CFGFILE
-
- proxy_flag "$1" SysLog >> $CFGFILE
-
- proxy_atom "$1" LogLevel >> $CFGFILE
-
- proxy_list "$1" XTinyproxy >> $CFGFILE
-
- proxy_atom "$1" MaxClients >> $CFGFILE
- proxy_atom "$1" MinSpareServers >> $CFGFILE
- proxy_atom "$1" MaxSpareServers >> $CFGFILE
- proxy_atom "$1" StartServers >> $CFGFILE
- proxy_atom "$1" MaxRequestsPerChild >> $CFGFILE
- proxy_list "$1" Allow >> $CFGFILE
-
- proxy_string "$1" ViaProxyName >> $CFGFILE
- proxy_string "$1" Filter >> $CFGFILE
-
- proxy_flag "$1" FilterURLs >> $CFGFILE
- proxy_flag "$1" FilterExtended >> $CFGFILE
- proxy_flag "$1" FilterCaseSensitive >> $CFGFILE
- proxy_flag "$1" FilterDefaultDeny Yes No >> $CFGFILE
-
- proxy_list "$1" Anonymous '"' >> $CFGFILE
- proxy_list "$1" ConnectPort >> $CFGFILE
-
- config_foreach write_upstream upstream
-
- service_start /usr/sbin/tinyproxy -c "$CFGFILE"
-}
-
-write_upstream() {
- local type
- local via
- local target
-
- config_get "type" "$1" "type"
- config_get via "$1" via
- config_get target "$1" target
- [ -n "$target" ] && target=' "'"$target"'"'
-
- [ "$type" == "proxy" -a -n "$via" ] && \
- echo "upstream $via$target" >> $CFGFILE
-
- [ "$type" == "reject" -a -n "$target" ] && \
- echo "no upstream$target" >> $CFGFILE
-}
-
-proxy_atom() {
- local SECTION=$1
- local OPTION=$2
- local DEFAULT=$3
-
- config_get _value "$SECTION" "$OPTION"
- [ -z "$_value" ] && _value="$DEFAULT"
- [ -n "$_value" ] && echo "$OPTION $_value"
-}
-
-proxy_string() {
- local SECTION=$1
- local OPTION=$2
- local ALIAS=$3
- local DEFAULT=$4
-
- config_get _value "$SECTION" "$OPTION"
- [ -z "$_value" ] && _value="$DEFAULT"
- [ -n "$_value" ] && echo "${ALIAS:-${OPTION}} "'"'"$_value"'"'
-}
-
-proxy_flag() {
- local SECTION=$1
- local OPTION=$2
- local TRUE="${3:-On}"
- local FALSE="${4:-Off}"
-
- config_get_bool _value "$SECTION" "$OPTION" 0
- [ "$_value" -eq "1" ] && _value="$TRUE" || _value="$FALSE"
- echo "$OPTION $_value"
-}
-
-proxy_list() {
- local SECTION=$1
- local OPTION=$2
- local ENCLOSE=$3
-
- config_get _value "$SECTION" "$OPTION"
- [ -n "$_value" ] && {
- for entry in $_value; do
- echo "$OPTION ${ENCLOSE}${entry}${ENCLOSE}"
- done
- }
-}
+++ /dev/null
---- a/configure
-+++ b/configure
-@@ -6815,59 +6815,8 @@ fi
-
-
-
--# Check for asciidoc
--# Extract the first word of "a2x", so it can be a program name with args.
--set dummy a2x; ac_word=$2
--{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
--$as_echo_n "checking for $ac_word... " >&6; }
--if test "${ac_cv_path_A2X+set}" = set; then :
-- $as_echo_n "(cached) " >&6
--else
-- case $A2X in
-- [\\/]* | ?:[\\/]*)
-- ac_cv_path_A2X="$A2X" # Let the user override the test with a path.
-- ;;
-- *)
-- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-- ac_cv_path_A2X="$as_dir/$ac_word$ac_exec_ext"
-- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-- break 2
-- fi
--done
-- done
--IFS=$as_save_IFS
--
-- test -z "$ac_cv_path_A2X" && ac_cv_path_A2X="no"
-- ;;
--esac
--fi
--A2X=$ac_cv_path_A2X
--if test -n "$A2X"; then
-- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $A2X" >&5
--$as_echo "$A2X" >&6; }
--else
-- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
--$as_echo "no" >&6; }
--fi
--
--
-- if test "x$A2X" != "xno"; then
-- HAVE_A2X_TRUE=
-- HAVE_A2X_FALSE='#'
--else
- HAVE_A2X_TRUE='#'
- HAVE_A2X_FALSE=
--fi
--
--if test x"$A2X" = x"no"; then
-- as_fn_error $? "Test for asciidoc failed. See the file 'INSTALL' for help." "$LINENO" 5
--fi
-
- ac_config_files="$ac_config_files Makefile src/Makefile data/Makefile data/templates/Makefile etc/Makefile docs/Makefile docs/man5/Makefile docs/man5/tinyproxy.conf.txt docs/man8/Makefile docs/man8/tinyproxy.txt m4macros/Makefile tests/Makefile tests/scripts/Makefile"
-
---- a/Makefile.am
-+++ b/Makefile.am
-@@ -2,9 +2,7 @@ SUBDIRS = \
- src \
- data \
- etc \
-- docs \
- m4macros \
-- tests
-
- # tools want this on a single line
- ACLOCAL_AMFLAGS = -I m4macros
---- a/Makefile.in
-+++ b/Makefile.in
-@@ -222,9 +222,7 @@ SUBDIRS = \
- src \
- data \
- etc \
-- docs \
- m4macros \
-- tests
-
-
- # tools want this on a single line
+++ /dev/null
---- a/src/main.c
-+++ b/src/main.c
-@@ -326,8 +326,8 @@ static void initialize_config_defaults (
- conf->errorpages = NULL;
- conf->stathost = safestrdup (TINYPROXY_STATHOST);
- conf->idletimeout = MAX_IDLE_TIME;
-- conf->logf_name = safestrdup (LOCALSTATEDIR "/log/tinyproxy/tinyproxy.log");
-- conf->pidpath = safestrdup (LOCALSTATEDIR "/run/tinyproxy/tinyproxy.pid");
-+ conf->logf_name = safestrdup (LOCALSTATEDIR "/log/tinyproxy.log");
-+ conf->pidpath = safestrdup (LOCALSTATEDIR "/tinyproxy.pid");
- }
-
- /**
+++ /dev/null
---- a/src/conf.c
-+++ b/src/conf.c
-@@ -865,7 +865,6 @@ static HANDLE_FUNC (handle_deny)
-
- static HANDLE_FUNC (handle_bind)
- {
--#ifndef TRANSPARENT_PROXY
- int r = set_string_arg (&conf->bind_address, line, &match[2]);
-
- if (r)
-@@ -873,11 +872,6 @@ static HANDLE_FUNC (handle_bind)
- log_message (LOG_INFO,
- "Outgoing connections bound to IP %s", conf->bind_address);
- return 0;
--#else
-- fprintf (stderr,
-- "\"Bind\" cannot be used with transparent support enabled.\n");
-- return 1;
--#endif
- }
-
- static HANDLE_FUNC (handle_listen)
+++ /dev/null
---- a/src/sock.c
-+++ b/src/sock.c
-@@ -39,8 +39,7 @@
- * returned if the bind succeeded. Otherwise, -1 is returned
- * to indicate an error.
- */
--static int
--bind_socket (int sockfd, const char *addr, int family)
-+static int bind_socket (int sockfd, const char *addr)
- {
- struct addrinfo hints, *res, *ressave;
-
-@@ -48,7 +47,7 @@ bind_socket (int sockfd, const char *add
- assert (addr != NULL && strlen (addr) != 0);
-
- memset (&hints, 0, sizeof (struct addrinfo));
-- hints.ai_family = family;
-+ hints.ai_family = AF_UNSPEC;
- hints.ai_socktype = SOCK_STREAM;
-
- /* The local port it not important */
-@@ -106,14 +105,12 @@ int opensock (const char *host, int port
-
- /* Bind to the specified address */
- if (bind_to) {
-- if (bind_socket (sockfd, bind_to,
-- res->ai_family) < 0) {
-+ if (bind_socket (sockfd, bind_to) < 0) {
- close (sockfd);
- continue; /* can't bind, so try again */
- }
- } else if (config.bind_address) {
-- if (bind_socket (sockfd, config.bind_address,
-- res->ai_family) < 0) {
-+ if (bind_socket (sockfd, config.bind_address) < 0) {
- close (sockfd);
- continue; /* can't bind, so try again */
- }
projects / packages.git / commitdiff