[backfire] target: standardize config file & patches dir names (2.6)

[10.03/openwrt.git] / target / linux / kirkwood / patches-2.6.30 / 003-gating.patch

diff --git a/target/linux/kirkwood/patches-2.6.30/003-gating.patch b/target/linux/kirkwood/patches-2.6.30/003-gating.patch
new file mode 100644 (file)
index 0000000..c858d01
--- /dev/null
+++ b/target/linux/kirkwood/patches-2.6.30/003-gating.patch
@@ -0,0 +1,132 @@
+From: Rabeeh Khoury <rabeeh@marvell.com>
+Date: Sun, 22 Mar 2009 15:30:32 +0000 (+0200)
+Subject: [ARM] Kirkwood: peripherals clock gating for power management
+X-Git-Url: http://git.marvell.com/?p=orion.git;a=commitdiff_plain;h=c0c3df02efed0e5dea9aa4d8313e06e1f68f2cb4;hp=039b97666e1335eac517c7d35a0fa1143af689f0
+
+[ARM] Kirkwood: peripherals clock gating for power management
+
+1. Enabling clock gating of unused peripherals
+2. PLL and PHY of the units are also disabled (when possible.
+
+Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com>
+
+[ This needs to be revisited to make power handling dynamic and per device.  -- Nico ]
+
+---
+
+--- a/arch/arm/mach-kirkwood/common.c
++++ b/arch/arm/mach-kirkwood/common.c
+@@ -786,6 +786,38 @@ static void __init kirkwood_l2_init(void
+ #endif
+ }
+ 
++void __init kirkwood_clock_gate(u32 reg)
++{
++      printk(KERN_INFO "Kirkwood: Gating clock using mask 0x%x\n", reg);
++      /* First make sure that the units are accessible */
++      writel(readl(CLOCK_GATING_CTRL) | reg, CLOCK_GATING_CTRL);
++      /* For SATA first shutdown the phy */
++      if (reg & CGC_SATA0) {
++              /* Disable PLL and IVREF */
++              writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
++              /* Disable PHY */
++              writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
++      }
++      if (reg & CGC_SATA1) {
++              /* Disable PLL and IVREF */
++              writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
++              /* Disable PHY */
++              writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
++      }
++      /* For PCI-E first shutdown the phy */
++      if (reg & CGC_PEX0) {
++              writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
++              while (1) {
++                      if (readl(PCIE_STATUS) & 0x1)
++                              break;
++              }
++              writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
++      }
++      /* Now gate clock the required units */
++      writel(readl(CLOCK_GATING_CTRL) & ~reg, CLOCK_GATING_CTRL);
++      return;
++}
++
+ void __init kirkwood_init(void)
+ {
+       printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
+--- a/arch/arm/mach-kirkwood/common.h
++++ b/arch/arm/mach-kirkwood/common.h
+@@ -22,6 +22,7 @@ struct mvsdio_platform_data;
+ void kirkwood_map_io(void);
+ void kirkwood_init(void);
+ void kirkwood_init_irq(void);
++void __init kirkwood_clock_gate(u32 reg);
+ 
+ extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
+ void kirkwood_setup_cpu_mbus(void);
+--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
++++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+@@ -39,4 +39,20 @@
+ #define L2_CONFIG_REG         (BRIDGE_VIRT_BASE | 0x0128)
+ #define L2_WRITETHROUGH               0x00000010
+ 
++#define CLOCK_GATING_CTRL     (BRIDGE_VIRT_BASE | 0x11c)
++#define CGC_GE0                       0x1
++#define CGC_PEX0              0x4
++#define CGC_USB0              0x8
++#define CGC_SDIO              0x10
++#define CGC_TSU                       0x20
++#define CGC_NAND_SPI          0x80
++#define CGC_XOR0              0x100
++#define CGC_AUDIO             0x200
++#define CGC_SATA0             0x4000
++#define CGC_SATA1             0x8000
++#define CGC_XOR1              0x10000
++#define CGC_CRYPTO            0x20000
++#define CGC_GE1                       0x80000
++#define CGC_TDM                       0x100000
++
+ #endif
+--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
++++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+@@ -64,6 +64,8 @@
+ #define BRIDGE_VIRT_BASE      (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+ 
+ #define PCIE_VIRT_BASE                (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
++#define PCIE_LINK_CTRL                (PCIE_VIRT_BASE | 0x70)
++#define PCIE_STATUS           (PCIE_VIRT_BASE | 0x1a04)
+ 
+ #define USB_PHYS_BASE         (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
+ 
+@@ -80,6 +82,11 @@
+ #define GE01_PHYS_BASE                (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
+ 
+ #define SATA_PHYS_BASE                (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
++#define SATA_VIRT_BASE                (KIRKWOOD_REGS_VIRT_BASE | 0x80000)
++#define SATA0_IF_CTRL         (SATA_VIRT_BASE | 0x2050)
++#define SATA0_PHY_MODE_2      (SATA_VIRT_BASE | 0x2330)
++#define SATA1_IF_CTRL         (SATA_VIRT_BASE | 0x4050)
++#define SATA1_PHY_MODE_2      (SATA_VIRT_BASE | 0x4330)
+ 
+ #define SDIO_PHYS_BASE                (KIRKWOOD_REGS_PHYS_BASE | 0x90000)
+ 
+--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
++++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
+@@ -19,6 +19,7 @@
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <mach/kirkwood.h>
++#include <mach/bridge-regs.h>
+ #include <plat/mvsdio.h>
+ #include <plat/orion_nand.h>
+ #include "common.h"
+@@ -122,6 +123,8 @@ static void __init sheevaplug_init(void)
+ 
+       platform_device_register(&sheevaplug_nand_flash);
+       platform_device_register(&sheevaplug_leds);
++      kirkwood_clock_gate(CGC_PEX0 | CGC_TSU | CGC_AUDIO | CGC_SATA0 |\
++                              CGC_SATA1 | CGC_CRYPTO | CGC_GE1 | CGC_TDM);
+ }
+ 
+ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")