"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-09-04 21:17+0200\n"
+"PO-Revision-Date: 2014-05-04 11:38+0200\n"
"Last-Translator: José Vicente <josevteg@gmail.com>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: es\n"
msgid "15 Minute Load:"
msgstr "Carga a 15 minutos:"
-msgid "40MHz 2nd channel above"
-msgstr "40MHz 2º canal por encima"
-
-msgid "40MHz 2nd channel below"
-msgstr "40MHz 2º canal por debajo"
-
msgid "5 Minute Load:"
msgstr "Carga a 5 minutos:"
msgstr ""
"Puerta de enlace <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
+msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Suffix (hex)"
+msgstr ""
+
msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
msgstr "Configuración de <abbr title=\"Light Emitting Diode\">LEDs</abbr>"
"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
"Protocol\">DHCP</abbr> leases"
msgstr ""
-"Máximo número de cesiones <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr>"
+"Máximas cesiones <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
+"abbr>"
msgid ""
"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
msgstr "<abbr title='Pairwise: %s / Grupo: %s'>%s - %s</abbr>"
+msgid "ADSL"
+msgstr ""
+
+msgid "ADSL Status"
+msgstr ""
+
msgid "APN"
msgstr "APN"
msgid "ATM device number"
msgstr "Número de dispositivo ATM"
-msgid "Accept router advertisements"
-msgstr "Aceptar anuncios del router"
-
msgid "Access Concentrator"
msgstr "Concentrador de acceso"
msgid "Ad-Hoc"
msgstr "Ad-Hoc"
+msgid "Ad-hoc mode"
+msgstr ""
+
msgid "Add"
msgstr "Añadir"
msgstr "Dirección"
msgid "Address to access local relay bridge"
-msgstr "Dirección para acceder al puente seguro local"
+msgstr "Dirección del puente relé local"
msgid "Administration"
msgstr "Administración"
msgid "Advanced Settings"
msgstr "Configuración avanzada"
-msgid "Advertise IPv6 on network"
-msgstr "Anunciar IPv6 en la red"
-
-msgid "Advertised network ID"
-msgstr "ID de red anunciado"
-
msgid "Alert"
msgstr "Alerta"
msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
msgstr ""
-"Permitir autenticación de contraseña via <abbr title=\"Secure "
-"Shell\">SSH</abbr>"
+"Permitir autenticación de contraseña via <abbr title=\"Secure Shell\">SSH</"
+"abbr>"
msgid "Allow all except listed"
msgstr "Permitir a todos excepto a los de la lista"
msgstr ""
"Permitir respuestas en el rango 127.0.0.0/8, por ejemplo para servicios RBL"
-msgid "Allowed range is 1 to 65535"
-msgstr "El rango permitido es desde 1 hasta 65535"
+msgid "Always announce default router"
+msgstr ""
+
+msgid ""
+"Always use 40MHz channels even if the secondary channel overlaps. Using this "
+"option does not comply with IEEE 802.11n-2009!"
+msgstr ""
+"Usar canales de 40MHz aunque el canal secundario solape con otro. ¡El "
+"estándar IEEE 802.11n-2009 indica que no es correcto hacer esto!"
msgid "An additional network will be created if you leave this unchecked."
msgstr "Se creará una red adicional si deja esto desmarcado."
+msgid "Announce as default router even if no public prefix is available."
+msgstr ""
+
+msgid "Announced DNS domains"
+msgstr ""
+
+msgid "Announced DNS servers"
+msgstr ""
+
msgid "Antenna 1"
msgstr "Antena 1"
msgid "Applying changes"
msgstr "Aplicando cambios"
+msgid ""
+"Assign a part of given length of every public IPv6-prefix to this interface"
+msgstr ""
+
msgid "Assign interfaces..."
msgstr "Asigne interfaces..."
+msgid ""
+"Assign prefix parts using this hexadecimal subprefix ID for this interface."
+msgstr ""
+
msgid "Associated Stations"
msgstr "Estaciones asociadas"
msgid "Auto Refresh"
msgstr "Autorefresco"
+msgid "Automatic Homenet (HNCP)"
+msgstr ""
+
msgid "Available"
msgstr "Disponible"
msgstr "Exploración en segundo plano"
msgid "Backup / Flash Firmware"
-msgstr "Copias de seguridad / Grabar firmware"
+msgstr "Copia de seguridad / Grabar firmware"
msgid "Backup / Restore"
msgstr "Salvar / Restaurar"
msgid "Bad address specified!"
msgstr "¡Dirección no válida!"
+msgid "Band"
+msgstr ""
+
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
"persist connection"
msgstr ""
"Cerrar las conexiones inactivas tras los segundos dados. Use 0 para una "
-"conexión persistente"
+"conexión permanente"
msgid "Close list..."
msgstr "Cerrar lista..."
msgid "Collecting data..."
-msgstr "Recopilando datos..."
+msgstr "Un momento..."
msgid "Command"
msgstr "Comando"
msgid "Custom Interface"
msgstr "Interfaz propio"
+msgid "Custom delegated IPv6-prefix"
+msgstr ""
+
msgid ""
"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
"\">LED</abbr>s if possible."
msgid "DHCPv6 Leases"
msgstr "Cesiones DHCPv6"
+msgid "DHCPv6 client"
+msgstr ""
+
+msgid "DHCPv6-Mode"
+msgstr ""
+
+msgid "DHCPv6-Service"
+msgstr ""
+
msgid "DNS"
msgstr "DNS"
msgid "DNS forwardings"
msgstr "Retransmisión DNS"
+msgid "DNS-Label / FQDN"
+msgstr ""
+
+msgid "DS-Lite AFTR address"
+msgstr ""
+
msgid "DUID"
msgstr "DUID"
"firewalls"
msgstr ""
"Dnsmasq es un programa que combina un servidor <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr> y un reenviador <abbr title=\"Domain Name "
-"System\">DNS</abbr> para cortafuegos <abbr title=\"Network Address "
+"Configuration Protocol\">DHCP</abbr> y un reenviador <abbr title=\"Domain "
+"Name System\">DNS</abbr> para cortafuegos <abbr title=\"Network Address "
"Translation\">NAT</abbr>"
msgid "Do not cache negative replies, e.g. for not existing domains"
"Dropbear ofrece acceso <abbr title=\"Secure Shell\">SSH</abbr> y un servidor "
"<abbr title=\"Secure Copy\">SCP</abbr>"
+msgid "Dual-Stack Lite (RFC6333)"
+msgstr ""
+
msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
msgstr ""
"<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> dinámico"
msgid "Enable Jumbo Frame passthrough"
msgstr "Activar paso de tramas jumbo"
+msgid "Enable NTP client"
+msgstr "Activar cliente NTP"
+
msgid "Enable TFTP server"
msgstr "Activar servidor TFTP"
msgid "Enable VLAN functionality"
msgstr "Activar funcionalidad VLAN"
-msgid "Enable builtin NTP server"
-msgstr "Activar el servidor integrado NTP"
-
msgid "Enable learning and aging"
msgstr "Activar aprendizaje y envejecimiento"
msgstr "Grabar imagen..."
msgid "Flash new firmware image"
-msgstr "Grabar nueva imagen del firmware"
+msgstr "Grabar imágenes del firmware"
msgid "Flash operations"
msgstr "Operaciones de grabado"
msgid "Force"
msgstr "Forzar"
+msgid "Force 40MHz mode"
+msgstr "Forzar modo 40MHz"
+
msgid "Force CCMP (AES)"
msgstr "Forzar CCMP (AES)"
msgid "GHz"
msgstr "GHz"
+msgid "GPRS only"
+msgstr "Sólo GPRS"
+
msgid "Gateway"
msgstr "Pasarela"
msgid "Given password confirmation did not match, password not changed!"
msgstr ""
-"La confirmación de la contraseña no coincide. ¡No se ha cambiado la "
+"La confirmación y la contraseña no coinciden. ¡No se ha cambiado la "
"contraseña!"
+msgid "Global network options"
+msgstr ""
+
msgid "Go to password configuration..."
msgstr "Ir a configuración de contraseña..."
msgid "Go to relevant configuration page"
msgstr "Ir a la página principal de configuración"
+msgid "Guest mode"
+msgstr ""
+
msgid "HE.net password"
msgstr "Contraseña HE.net"
msgid "HE.net user ID"
msgstr "ID de usuario de HE.net"
-msgid "HT capabilities"
-msgstr "Habilidades HT"
-
-msgid "HT mode"
-msgstr "Modo HT"
+msgid "HT mode (802.11n)"
+msgstr ""
msgid "Handler"
msgstr "Manejador"
msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
msgstr ""
-"Dirección <abbr title=\"Internet Protocol Address\">IP</abbr> de máquina o red"
+"Dirección <abbr title=\"Internet Protocol Address\">IP</abbr> de máquina o "
+"red"
msgid "Hostname"
msgstr "Nombre de máquina"
msgid "IPv4 and IPv6"
msgstr "IPv4 e IPv6"
+msgid "IPv4 assignment length"
+msgstr ""
+
msgid "IPv4 broadcast"
msgstr "Propagación IPv4"
msgid "IPv6 Firewall"
msgstr "Cortafuegos IPv6"
+msgid "IPv6 Settings"
+msgstr ""
+
+msgid "IPv6 ULA-Prefix"
+msgstr ""
+
msgid "IPv6 WAN Status"
msgstr "Estado de la WAN IPv6"
msgid "IPv6 address"
msgstr "Dirección IPv6"
+msgid "IPv6 assignment hint"
+msgstr ""
+
+msgid "IPv6 assignment length"
+msgstr ""
+
msgid "IPv6 gateway"
msgstr "Gateway IPv6"
msgid "IPv6 prefix length"
msgstr "Longitud de prefijo IPv6"
+msgid "IPv6 routed prefix"
+msgstr ""
+
msgid "IPv6-Address"
msgstr "Dirección IPv6"
"slow process as the swap-device cannot be accessed with the high datarates "
"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
msgstr ""
-"Si su dispositivo no tiene memoria <abbr title=\"Random Access "
-"Memory\">RAM</abbr> suficiente, los datos no utilizados pueden ser guardados "
-"temporalmente en un dispositivo de intercambio (swap-device) liberando el "
-"espacio que ocupan. Tenga en cuenta que el intercambio es un proceso lento "
-"porque los dispositivos de intercambio no pueden transferir volúmenes de "
-"información a alta velocidad tal y como hace la memoria <abbr title=\"Random "
-"Access Memory\">RAM</abbr>."
+"Si su dispositivo no tiene memoria <abbr title=\"Random Access Memory\">RAM</"
+"abbr> suficiente, los datos no utilizados pueden ser guardados temporalmente "
+"en un dispositivo de intercambio (swap-device) liberando el espacio que "
+"ocupan. Tenga en cuenta que el intercambio es un proceso lento porque los "
+"dispositivos de intercambio no pueden transferir volúmenes de información a "
+"alta velocidad tal y como hace la memoria <abbr title=\"Random Access Memory"
+"\">RAM</abbr>."
msgid "Ignore Hosts files"
msgstr "Ignorar fichero de máquinas"
msgid "Install"
msgstr "Instalar"
+msgid "Install iputils-traceroute6 for IPv6 traceroute"
+msgstr ""
+
msgid "Install package %q"
msgstr "Instalar el paquete %q"
"memory, please verify the image file!"
msgstr ""
"Parece que está intentando grabar una imagen de firmware mayor que la "
-"memoria flash de su equipo. ¡Por favor verifique el archivo!"
+"memoria flash de su equipo. ¡Por favor, verifique el archivo!"
msgid "Java Script required!"
msgstr "¡Se necesita JavaScript!"
msgstr "Unirse a una red: Exploración inalámbrica"
msgid "Keep settings"
-msgstr "Conservar configuración"
+msgstr "Conservar la configuración del router"
msgid "Kernel Log"
msgstr "Registro del Kernel"
msgid "Limit"
msgstr "Límite"
+msgid "Line Attenuation"
+msgstr ""
+
+msgid "Line Speed"
+msgstr ""
+
+msgid "Line State"
+msgstr ""
+
msgid "Link On"
msgstr "Enlace activado"
msgstr "Hora local"
msgid "Local domain"
-msgstr "Dominio Local"
+msgstr "Dominio local"
msgid ""
"Local domain specification. Names matching this domain are never forwared "
"and resolved from DHCP or hosts files only"
msgstr ""
"Especificación de dominio local. Los nombres que coincidan con este dominio "
-"nunca se retransmiten y se resuelven desde DHCP o ficheros de máquina "
-"locales"
+"nunca se retransmiten y se resuelven desde DHCP o ficheros de máquina locales"
msgid "Local domain suffix appended to DHCP names and hosts file entries"
msgstr ""
msgstr "Número máximo de consultas DNS concurrentes"
msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr "Tamaño máximo de paquetes EDNS.0 UDP"
+msgstr "Tamaño máximo de paquetes EDNS.0 paquetes UDP"
msgid "Maximum amount of seconds to wait for the modem to become ready"
msgstr "Segundos máximos de espera a que el módem esté activo"
msgid "Mode"
msgstr "Modo"
+msgid "Model"
+msgstr ""
+
msgid "Modem device"
msgstr "Dispositivo de módem"
msgid "NAS ID"
msgstr "NAS ID"
+msgid "NDP-Proxy"
+msgstr ""
+
msgid "NTP server candidates"
msgstr "Servidores NTP a consultar"
msgid "Noise"
msgstr "Ruido"
+msgid "Noise Margin"
+msgstr ""
+
msgid "Noise:"
msgstr "Ruido:"
"Configure las interfaces de red. Puede hacer puentes con diferentes "
"interfaces, marcando el campo \"puentear interfaces\" e introduciendo el "
"nombre de las mismas separadas por espacios. También puede usar la notación "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr>, "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"por ejemplo\">Ej.</abbr>: "
-"<samp>eth0.1</samp>)."
+"<abbr title=\"Virtual Local Area Network\">VLAN</abbr>, <samp>INTERFACE."
+"VLANNR</samp> (<abbr title=\"por ejemplo\">Ej.</abbr>: <samp>eth0.1</samp>)."
msgid "On-State Delay"
msgstr "Retraso de activación"
+msgid "One of hostname or mac address must be specified!"
+msgstr "¡Debe especificar al menos un nombre de máquina o dirección mac!"
+
msgid "One or more fields contain invalid values!"
msgstr "¡Valores no válidos!"
msgstr "Pico:"
msgid "Perform reboot"
-msgstr "Reiniciar"
+msgstr "Rearrancar"
msgid "Perform reset"
msgstr "Reiniciar"
msgstr "Paq."
msgid "Please enter your username and password."
-msgstr "Por favor introduzca su nombre de usuario y contraseña."
+msgstr "Por favor, introduzca su nombre de usuario y contraseña."
msgid "Please wait: Device rebooting..."
-msgstr "Por favor espere: Reiniciando dispositivo..."
+msgstr "Espere por favor: Rearrancando dispositivo..."
msgid "Policy"
msgstr "Política"
msgid "Port %d is untagged in multiple VLANs!"
msgstr "¡El puerto %d está desmarcado en múltiples VLANs!"
+msgid "Port status:"
+msgstr "Estado del puerto:"
+
msgid ""
"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
"ignore failures"
msgid "Protocol support is not installed"
msgstr "No está instalado el soporte al protocolo"
+msgid "Provide NTP server"
+msgstr "Dar servicio NTP"
+
msgid "Provide new network"
msgstr "Introduzca una nueva red"
msgid "Pseudo Ad-Hoc (ahdemo)"
msgstr "Pseudo Ad-Hoc (ahdemo)"
+msgid "Public prefix routed to this device for distribution to clients."
+msgstr ""
+
msgid "Quality"
msgstr "Calidad"
"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
"Configuration Protocol\">DHCP</abbr>-Server"
msgstr ""
-"Leer <code>/etc/ethers</code> para configurar el servidor <abbr "
-"title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
+"Leer <code>/etc/ethers</code> para configurar el servidor <abbr title="
+"\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
msgid ""
"Really delete this interface? The deletion cannot be undone!\\nYou might "
"lose access to this device if you are connected via this interface."
msgstr ""
-"¿Está seguro de borrar esta interfaz?. ¡No es posible deshacer el borrado!\n"
-"Puede perder el acceso a este dispositivo si está conectado vía esta "
+"¿Está seguro de borrar esta interfaz?. ¡No será posible deshacer el "
+"borrado!\n"
+"Puede perder el acceso a este dispositivo si está conectado por esta "
"interfaz."
msgid ""
"Really delete this wireless network? The deletion cannot be undone!\\nYou "
"might lose access to this device if you are connected via this network."
msgstr ""
-"¿Está seguro de borrar esta red inalámbrica?. ¡No es posible deshacer el "
+"¿Está seguro de borrar esta red inalámbrica?. ¡No será posible deshacer el "
"borrado!\n"
-"Puede perder el acceso a este dispositivo si está conectado vía esta red."
+"Puede perder el acceso a este dispositivo si está conectado por esta red."
msgid "Really reset all changes?"
msgstr "¿Está seguro de querer reiniciar todos los cambios?"
"you are connected via this interface."
msgstr ""
"¿Está seguro de apagar la interfaz \"%s\"?.\n"
-"Puede perder el acceso a este dispositivo si está conectado vía esta "
-"interfaz."
+"Puede perder el acceso a este dispositivo si está conectado por interfaz."
msgid ""
"Really shutdown network ?\\nYou might lose access to this device if you are "
"connected via this interface."
msgstr ""
"¿Está seguro de querer apagar esta red?.\n"
-"Puede perder el acceso a este dispositivo si está conectado vía esta red."
+"Puede perder el acceso a este dispositivo si está conectado por esta red."
msgid "Really switch protocol?"
msgstr "¿Está seguro de querer cambiar el protocolo?"
msgstr "Conexiones en tiempo real"
msgid "Realtime Graphs"
-msgstr "Gráficos en tiempo real"
+msgstr "Gráficas en tiempo real"
msgid "Realtime Load"
msgstr "Carga en tiempo real"
msgstr "Protección contra reasociación"
msgid "Reboot"
-msgstr "Reiniciar"
+msgstr "Rearrancar"
msgid "Rebooting..."
-msgstr "Reiniciando..."
+msgstr "Rearrancando..."
msgid "Reboots the operating system of your device"
-msgstr "Reinicia el sistema operativo de su dispositivo"
+msgstr "Rearranque el sistema operativo de su dispositivo"
msgid "Receive"
msgstr "Recibir"
msgstr "Dominio Regulador"
msgid "Relay"
-msgstr "Relevo"
+msgstr "Relé"
msgid "Relay Bridge"
-msgstr "Puente con relevo"
+msgstr "Puente relé"
msgid "Relay between networks"
-msgstr "Relevo entre redes"
+msgstr "Relé entre redes"
msgid "Relay bridge"
-msgstr "Puente de relevo"
+msgstr "Puente relé"
msgid "Remote IPv4 address"
msgstr "Dirección IPv4 remota"
msgid "Replace wireless configuration"
msgstr "Cambiar la configuración inalámbrica"
+msgid "Request IPv6-address"
+msgstr ""
+
+msgid "Request IPv6-prefix of length"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "Necesario para ciertos ISPs, por ejemplo Charter con DOCSIS 3"
msgid "Root directory for files served via TFTP"
msgstr "Directorio raíz para los ficheros servidos por TFTP"
-msgid "Router Model"
-msgstr "Modelo de router"
-
-msgid "Router Name"
-msgstr "Nombre del router"
+msgid "Router Advertisement-Service"
+msgstr ""
msgid "Router Password"
msgstr "Contraseña del router"
"Enviar peticiones de echo LCP cada intervalo de segundos dado, solo efectivo "
"usado conjuntamente con el umbral de fallo"
-msgid "Send router solicitations"
-msgstr "Enviar solicitudes de router"
-
msgid "Separate Clients"
msgstr "Aislar clientes"
msgid "Source"
msgstr "Origen"
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr "Especifica el tiempo de prefijo anunciado preferido en segundos"
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr "Especifica el tiempo de prefijo válido preferido en segundos"
-
msgid "Specifies the button state to handle"
msgstr "Especifica el estado de botón a manejar"
msgid "Submit"
msgstr "Guardar"
+msgid "Swap"
+msgstr ""
+
msgid "Swap Entry"
msgstr "Entrada de intercambio"
msgid "Switch"
-msgstr "Conmutador"
+msgstr "Switch"
msgid "Switch %q"
-msgstr "Conmutador %q"
+msgstr "Switch %q"
msgid "Switch %q (%s)"
-msgstr "Conmutador %q (%s)"
+msgstr "Switch %q (%s)"
msgid "Switch protocol"
msgstr "Intercambiar protocolo"
# Target = Meta --> Objetivo --> Destino?
msgid "Target"
-msgstr "Destino"
+msgstr "Objetivo"
msgid "Terminate"
msgstr "Terminar"
"compare them with the original file to ensure data integrity.<br /> Click "
"\"Proceed\" below to start the flash procedure."
msgstr ""
-"Imagen recibida. Compruebe que la verificación y tamaño del fichero recibido "
+"Imagen recibida. Verifique que la comprobación y tamaño del fichero recibido "
"coinciden con los del original.<br />Pulse \"Proceder\" para empezar el "
"grabado."
msgstr ""
"Los puertos de red de este dispositivo se pueden combinar en varias <abbr "
"title=\"Virtual Local Area Network\">VLAN</abbr>s en las que los ordenadores "
-"se pueden comunicar directamente entre ellos. Las <abbr title=\"Virtual Local "
-"Area Network\">VLAN</abbr>s se usan a menudo para separar diferentes "
+"se pueden comunicar directamente entre ellos. Las <abbr title=\"Virtual "
+"Local Area Network\">VLAN</abbr>s se usan a menudo para separar diferentes "
"segmentos de red. Es común que exista un puerto por defecto para subida "
"hacia una red mayor como internet y el resto se dediquen a la red local."
"settings."
msgstr ""
"Escribiendo en la memoria flash.<br />¡NO APAGUE EL DISPOSITIVO!<br /> "
-"Espere unos minutos antes de reconectar. Es posible que tenga que reiniciar "
-"la conexión de su ordenador para poder acceder de nuevo al dispositivo."
+"Espere unos minutos antes de reconectar. Es posible que tenga que renovar la "
+"conexión de su ordenador para poder acceder de nuevo al dispositivo."
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgstr ""
-"El archivo con la imágen del firmware subido, presenta un formato de archivo "
-"no soportado. Asegurese de haber elegido una imágen genérica para su "
-"plataforma."
+"El archivo con la imagen de firmware subido no tiene un formato adecuado. "
+"Asegúrese de haber elegido la imagen correcta para su plataforma."
msgid "There are no active leases."
msgstr "Sin cesiones activas."
"There is no device assigned yet, please attach a network device in the "
"\"Physical Settings\" tab"
msgstr ""
-"No hay dispositivo asignado aún, por favor enlace un dispositivo de red en "
+"No hay dispositivo asignado aún. Por favor, enlace un dispositivo de red en "
"la pestaña \"Configuración física\""
msgid ""
"proteger el interfaz web y activar SSH."
msgid "This IPv4 address of the relay"
-msgstr "Dirección IPv4 del relevo"
+msgstr "Dirección IPv4 del relé"
msgid ""
"This is a list of shell glob patterns for matching files and directories to "
"Este es el único servidor <abbr title=\"Dynamic Host Configuration Protocol"
"\">DHCP</abbr> en la red de área local"
+msgid ""
+"This is the prefix routed to you by the tunnel broker for use by clients"
+msgstr ""
+
msgid "This is the system crontab in which scheduled tasks can be defined."
msgstr "Definición de tareas programadas para crontab."
msgid "Tunnel Interface"
msgstr "Interfaz de túnel"
+msgid "Tunnel Link"
+msgstr ""
+
msgid "Turbo Mode"
msgstr "Modo Turbo"
msgid "UDP:"
msgstr "UDP:"
+msgid "UMTS only"
+msgstr "Sólo UMTS"
+
msgid "UMTS/GPRS/EV-DO"
msgstr "UMTS/GPRS/EV-DO"
"OpenWrt compatible firmware image)."
msgstr ""
"Suba una imagen compatible con sysupgrade para reemplazar el firmware "
-"actual. No olvide marcar \"Conservar configuración\" para mantener la "
-"configuración actual (es necesario que la imagen de OpenWrt sea compatible)."
+"actual. Puede marcar \"Conservar la configuración\" si lo desea (es "
+"necesario que la imagen de OpenWrt sea compatible)."
msgid "Upload archive..."
msgstr "Subir archivo..."
msgid "Use broadcast flag"
msgstr "Usar marca de propagación"
+msgid "Use builtin IPv6-management"
+msgstr ""
+
msgid "Use custom DNS servers"
msgstr "Usar servidores DNS personalizados"
msgid "Use gateway metric"
msgstr "Usar métrica de la pasarela"
-msgid "Use preferred lifetime"
-msgstr "Usar tiempo de vida preferido"
-
msgid "Use routing table"
msgstr "Usar tabla de rutas"
"dirección fija a usar y <em>Nombre de máquina</em> se asignará como nombre "
"simbólico."
-msgid "Use valid lifetime"
-msgstr "Usar tiempo de vida válido"
-
msgid "Used"
msgstr "Usado"
msgid "Waiting for command to complete..."
msgstr "Esperando a que termine el comando..."
-msgid "Waiting for router..."
-msgstr "Esperando al router..."
-
msgid "Warning"
msgstr "Aviso"
msgid "Warning: There are unsaved changes that will be lost while rebooting!"
msgstr ""
"Advertencia: Hay cambios realizados que no han sido guardados, los mismos se "
-"perderán mientras se reinicia!"
+"perderán mientras se rearranca!"
msgid "Wifi"
msgstr "Wifi"
msgid ""
"You can enable or disable installed init scripts here. Changes will applied "
"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccesable!</strong>"
+"scripts like \"network\", your device might become inaccessible!</strong>"
msgstr ""
"Gestione los scripts de inicio. Los cambios serán aplicados tras reiniciar "
"el equipo.<br /><strong>ADVERTENCIA: ¡Si desactiva scripts de inicio "
msgid "auto"
msgstr "auto"
+#, fuzzy
+msgid "automatic"
+msgstr "estático"
+
+msgid "baseT"
+msgstr "baseT"
+
msgid "bridged"
msgstr "puenteado"
msgid "disable"
msgstr "desabilitar"
+msgid "disabled"
+msgstr ""
+
msgid "expired"
msgstr "expirado"
msgid "forward"
msgstr "retransmisión"
+msgid "full-duplex"
+msgstr "full dúplex"
+
+msgid "half-duplex"
+msgstr "half dúplex"
+
msgid "help"
msgstr "ayuda"
msgid "hidden"
msgstr "oculto"
+msgid "hybrid mode"
+msgstr ""
+
msgid "if target is a network"
msgstr "si el destino es una red"
msgid "no"
msgstr "no"
+msgid "no link"
+msgstr "sin enlace"
+
msgid "none"
msgstr "ninguno"
msgid "open"
msgstr "abierto"
+msgid "relay mode"
+msgstr ""
+
msgid "routed"
msgstr "enrutado"
+msgid "server mode"
+msgstr ""
+
+msgid "stateful-only"
+msgstr ""
+
+msgid "stateless"
+msgstr ""
+
+msgid "stateless + stateful"
+msgstr ""
+
msgid "tagged"
msgstr "marcado"
msgid "« Back"
msgstr "« Volver"
+#~ msgid "40MHz 2nd channel above"
+#~ msgstr "40MHz 2º canal por encima"
+
+#~ msgid "40MHz 2nd channel below"
+#~ msgstr "40MHz 2º canal por debajo"
+
+#~ msgid "Accept router advertisements"
+#~ msgstr "Aceptar anuncios del router"
+
+#~ msgid "Advertise IPv6 on network"
+#~ msgstr "Anunciar IPv6 en la red"
+
+#~ msgid "Advertised network ID"
+#~ msgstr "ID de red anunciado"
+
+#~ msgid "Allowed range is 1 to 65535"
+#~ msgstr "El rango permitido es desde 1 hasta 65535"
+
+#~ msgid "HT capabilities"
+#~ msgstr "Habilidades HT"
+
+#~ msgid "HT mode"
+#~ msgstr "Modo HT"
+
+#~ msgid "Router Model"
+#~ msgstr "Modelo de router"
+
+#~ msgid "Router Name"
+#~ msgstr "Nombre del router"
+
+#~ msgid "Send router solicitations"
+#~ msgstr "Enviar solicitudes de router"
+
+#~ msgid "Specifies the advertised preferred prefix lifetime in seconds"
+#~ msgstr "Especifica el tiempo de prefijo anunciado preferido en segundos"
+
+#~ msgid "Specifies the advertised valid prefix lifetime in seconds"
+#~ msgstr "Especifica el tiempo de prefijo válido preferido en segundos"
+
+#~ msgid "Use preferred lifetime"
+#~ msgstr "Usar tiempo de vida preferido"
+
+#~ msgid "Use valid lifetime"
+#~ msgstr "Usar tiempo de vida válido"
+
+#~ msgid "Waiting for router..."
+#~ msgstr "Esperando al router..."
+
+#~ msgid "Enable builtin NTP server"
+#~ msgstr "Activar el servidor integrado NTP"
+
#~ msgid "Active Leases"
#~ msgstr "Cesiones activas"
#~ msgid "adds domain names to hostentries in the resolv file"
#~ msgstr "añadir nombre de dominios a entradas de host en el archivo resolv"
-#, fuzzy
-#~ msgid "automatic"
-#~ msgstr "estático"
-
#~ msgid "automatically reconnect"
#~ msgstr "reconectar automáticamente"