Remove unmaintained components: lucid, fastindex, niu
[project/luci.git] / modules / niu / luasrc / model / cbi / niu / wireless / ap1.lua
diff --git a/modules/niu/luasrc/model/cbi/niu/wireless/ap1.lua b/modules/niu/luasrc/model/cbi/niu/wireless/ap1.lua
deleted file mode 100644 (file)
index 3ecbf5f..0000000
+++ /dev/null
@@ -1,310 +0,0 @@
---[[
-LuCI - Lua Configuration Interface
-
-Copyright 2009 Steven Barth <steven@midlink.org>
-Copyright 2009 Jo-Philipp Wich <xm@subsignal.org>
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-$Id$
-]]--
-
-local iface = "ap"
-local ap = true
-
-local fs = require "nixio.fs"
-local sys = require "luci.sys"
-local cursor = require "luci.model.uci".inst
-local state = require "luci.model.uci".inst_state
-cursor:unload("wireless")
-
-
-local device = cursor:get("wireless", iface, "device")
-local hwtype = cursor:get("wireless", device, "type")
-
-local nsantenna = cursor:get("wireless", device, "antenna")
-
-local iw = nil
-local tx_powers = {}
-local chan = {}
-
-state:foreach("wireless", "wifi-iface",
-       function(s)
-               if s.device == device and not iw then
-                       iw = sys.wifi.getiwinfo(s.ifname or s.device)
-                       chan = iw and iw.freqlist or { }
-                       tx_powers = iw.txpwrlist or { }
-               end
-       end)
-       
-local m
-
-
-if ap then
-m = Map("wireless", translate("Configure Access Point"))
-end
-
---- Device Settings ---
-s = m:section(NamedSection, device, "wifi-device", "Device Configuration")
-s.addremove = false
-
-s:tab("general", translate("General Settings"))
-
-ch = s:taboption("general", Value, "channel", translate("Channel"))
-ch:value("auto", translate("automatic"))
-for _, f in ipairs(chan) do
-       ch:value(f.channel, "%i (%.3f GHz)" %{ f.channel, f.mhz / 1000 })
-end
-
-
-
-s:tab("expert", translate("Expert Settings"))
-if hwtype == "mac80211" then
-       local macaddr = cursor:get("wireless", device, "macaddr") or "!"
-       local hwmode = cursor:get("wireless", device, "hwmode")
-       local modes = {}
-       local phy
-       local allowed = {}
-       for entry in fs.glob("/sys/class/ieee80211/*") do
-               if (fs.readfile(entry .. "/macaddress") or ""):find(macaddr) == 1 then
-                       phy = entry:sub(22)
-               end
-       end
-       if phy then
-               local iwp = io.popen("iw phy " .. phy .. " info")
-               local iwin = iwp:read("*a")
-               
-               if iwp then
-                       iwp:close()
-                       local htcap = iwin:match("HT capabilities:%s*0x([0-9a-fA-F]+)")
-                       allowed.n = (htcap and tonumber(htcap, 16) or 0) > 0
-                       allowed.g = iwin:find("2412 MHz")
-                       allowed.a = iwin:find("5180 MHz")
-               end
-       end
-       
-       if next(allowed) then
-               mode = s:taboption("expert", ListValue, "hwmode", translate("Communication Protocol"))
-               if allowed.n and allowed.g then
-                       mode:value("11ng", "802.11n (2.4 GHz)")
-               end
-               if allowed.n and allowed.a then
-                       mode:value("11na", "802.11n (5 GHz)")
-               end
-               if allowed.a then
-                       mode:value("11a", "802.11a (5 GHz)")
-               end
-               if allowed.g then
-                       mode:value("11g", "802.11g (2.4 GHz)")
-                       mode:value("11bg", "802.11b+g (2.4 GHz)")
-                       mode:value("11b", "802.11b (2.4 GHz)")
-               end
-       end
-
-       tp = s:taboption("expert",
-               (tx_powers and #tx_powers > 0) and ListValue or Value,
-               "txpower", translate("Transmission Power"), "dBm")
-
-       tp.rmempty = true
-       tp:value("", translate("automatic"))
-       for _, p in ipairs(iw and iw.txpwrlist or {}) do
-               tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
-       end
-elseif hwtype == "atheros" then
-       tp = s:taboption("expert",
-               (#tx_powers > 0) and ListValue or Value,
-               "txpower", translate("Transmission Power"), "dBm")
-
-       tp.rmempty = true
-       tp:value("", translate("automatic"))
-       for _, p in ipairs(iw.txpwrlist) do
-               tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
-       end
-
-       mode = s:taboption("expert", ListValue, "hwmode", translate("Communication Protocol"))
-       mode:value("", translate("automatic"))
-       mode:value("11g", "802.11g")
-       mode:value("11b", "802.11b")
-       mode:value("11bg", "802.11b+g")
-       mode:value("11a", "802.11a")
-       mode:value("11gst", "802.11g + Turbo")
-       mode:value("11ast", "802.11a + Turbo")
-       
-       if nsantenna then -- NanoFoo
-               local ant = s:taboption("expert", ListValue, "antenna", translate("Transmitter Antenna"))
-               ant:value("auto")
-               ant:value("vertical")
-               ant:value("horizontal")
-               ant:value("external")
-               ant.default = "auto"
-       end
-elseif hwtype == "broadcom" then
-       tp = s:taboption("expert",
-               (#tx_powers > 0) and ListValue or Value,
-               "txpower", translate("Transmit Power"), "dBm")
-
-       tp.rmempty = true
-       tp:value("", translate("automatic"))
-       for _, p in ipairs(iw.txpwrlist) do
-               tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
-       end     
-
-       mp = s:taboption("expert", ListValue, "macfilter", translate("MAC-Address Filter"))
-       mp:value("", translate("disable"))
-       mp:value("allow", translate("Allow listed only"))
-       mp:value("deny", translate("Allow all except listed"))
-       ml = s:taboption("expert", DynamicList, "maclist", translate("MAC-List"))
-       ml:depends({macfilter="allow"})
-       ml:depends({macfilter="deny"})
-
-       s:taboption("expert", Flag, "frameburst", translate("Allow Burst Transmissions"))
-elseif hwtype == "prism2" then
-       s:taboption("expert", Value, "txpower", translate("Transmission Power"), "att units").rmempty = true
-end
-
-
-
-
-s = m:section(NamedSection, iface, "wifi-iface", translate("Interface Details"))
-s.addremove = false
-
-s:tab("general", translate("General Settings"))
-s:tab("expert", translate("Expert Settings"))
-
-
-
-local ssid = s:taboption("general", Value, "ssid", translate("Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>)"))
-
-mode = s:taboption("expert", ListValue, "mode", translate("Operating Mode"))
-mode.override_values = true
-mode:value("ap", translate("Access Point"))
-
-encr = s:taboption("expert", ListValue, "encryption", translate("Encryption"))
-
-
-if hwtype == "mac80211" then
-       mode:value("mesh", translate("Mesh (802.11s)"))
-       local meshid = s:taboption("expert", Value, "mesh_id", translate("Mesh ID"))
-       meshid:depends("mode", "mesh")
-
-       s:taboption("expert", Flag, "wds", translate("Enable Bridging and Repeating (WDS)")):depends("mode", "ap")
-       s:taboption("expert", Flag, "powersave", translate("Enable Powersaving")):depends("mode", "ap")
-elseif hwtype == "atheros" then
-       -- mode:value("wds", translate("Static WDS"))
-       
-       mp = s:taboption("expert", ListValue, "macpolicy", translate("MAC-Address Filter"))
-       mp:value("", translate("disable"))
-       mp:value("deny", translate("Allow listed only"))
-       mp:value("allow", translate("Allow all except listed"))
-       ml = s:taboption("expert", DynamicList, "maclist", translate("MAC-List"))
-       ml:depends({macpolicy="allow"})
-       ml:depends({macpolicy="deny"})
-
-       s:taboption("expert", Flag, "wds", translate("Enable Bridging and Repeating (WDS)"))
-               
-       if ap then                              
-               hidden = s:taboption("expert", Flag, "hidden", translate("Hide Access Point"))
-               hidden:depends({mode="ap"})
-               hidden:depends({mode="ap-wds"})
-               
-               isolate = s:taboption("expert", Flag, "isolate", translate("Prevent communication between clients"))
-               isolate:depends({mode="ap"})
-       end
-       
-       s:taboption("expert", Flag, "bursting", translate("Allow Burst Transmissions"))
-elseif hwtype == "broadcom" then
-       if ap then
-               hidden = s:taboption("expert", Flag, "hidden", translate("Hide Access Point"))
-               hidden:depends({mode="ap"})
-               hidden:depends({mode="wds"})
-       
-               isolate = s:taboption("expert", Flag, "isolate", translate("Prevent communication between clients"))
-               isolate:depends({mode="ap"})
-       end
-elseif hwtype == "prism2" then
-       mp = s:taboption("expert", ListValue, "macpolicy", translate("MAC-Address Filter"))
-       mp:value("", translate("disable"))
-       mp:value("deny", translate("Allow listed only"))
-       mp:value("allow", translate("Allow all except listed"))
-       
-       ml = s:taboption("expert", DynamicList, "maclist", translate("MAC-List"))
-       ml:depends({macpolicy="allow"})
-       ml:depends({macpolicy="deny"})
-       
-       if ap then
-               hidden = s:taboption("expert", Flag, "hidden", translate("Hide Access Point"))
-               hidden:depends({mode="ap"})
-               hidden:depends({mode="wds"})
-       end
-end
-
--- Encryption --
-
-encr.default = "wep" -- Early default
-encr.override_values = true
-encr.override_depends = true
-encr:value("none", "No Encryption")
-encr:value("wep", "WEP", {mode="ap"})
-
-if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
-       local hostapd = fs.access("/usr/sbin/hostapd") or os.getenv("LUCI_SYSROOT")
-       local supplicant = fs.access("/usr/sbin/wpa_supplicant") or os.getenv("LUCI_SYSROOT")
-
-       if hostapd and not supplicant then              
-               encr:value("psk", "WPA", {mode="ap"})
-               encr:value("wpa", "WPA-EAP", {mode="ap"})
-               encr:value("psk-mixed", "WPA + WPA2", {mode="ap"})
-               encr:value("psk2", "WPA2", {mode="ap"})
-               encr:value("wpa2", "WPA2-EAP (802.11i)", {mode="ap"})
-               encr.default = "psk-mixed"
-       elseif not hostapd and supplicant then
-               encr:value("psk", "WPA", {mode="mesh"})
-               encr:value("psk2", "WPA2", {mode="mesh"})
-               encr.default = "psk2"
-       elseif hostapd and supplicant then
-               encr:value("psk", "WPA", {mode="ap"}, {mode="mesh"})
-               encr:value("wpa", "WPA-EAP", {mode="ap"})
-               encr:value("psk-mixed", "WPA + WPA2", {mode="ap"})
-               encr:value("psk2", "WPA2", {mode="ap"}, {mode="mesh"})
-               encr:value("wpa2", "WPA2-EAP (802.11i)", {mode="ap"})
-               encr.default = "psk-mixed"              
-       end
-elseif hwtype == "broadcom" then
-       encr:value("psk", "WPA")
-       encr:value("psk+psk2", "WPA + WPA2")
-       encr:value("psk2", "WPA2")
-       encr.default = "psk+psk2"
-end
-
-server = s:taboption("general", Value, "server", translate("Radius-Server"))
-server:depends({mode="ap", encryption="wpa"})
-server:depends({mode="ap", encryption="wpa2"})
-server.rmempty = true
-
-port = s:taboption("general", Value, "port", translate("Radius-Port"))
-port:depends({mode="ap", encryption="wpa"})
-port:depends({mode="ap", encryption="wpa2"})
-port.rmempty = true
-
-key = s:taboption("general", Value, "key", translate("Password"))
-key:depends("encryption", "wep")
-key:depends("encryption", "psk")
-key:depends("encryption", "psk2")
-key:depends("encryption", "psk+psk2")
-key:depends("encryption", "psk-mixed")
-key:depends({mode="ap", encryption="wpa"})
-key:depends({mode="ap", encryption="wpa2"})
-key.rmempty = true
-key.password = true
-
-if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
-       nasid = s:taboption("general", Value, "nasid", translate("NAS ID"))
-       nasid:depends({mode="ap", encryption="wpa"})
-       nasid:depends({mode="ap", encryption="wpa2"})
-       nasid.rmempty = true
-end
-return m