-- wireless toggle was requested, commit and reload page
function m.parse(map)
+ local new_cc = m:formvalue("cbid.wireless.%s.country" % wdev:name())
+ local old_cc = m:get(wdev:name(), "country")
+
if m:formvalue("cbid.wireless.%s.__toggle" % wdev:name()) then
if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
wnet:set("disabled", nil)
luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless", arg[1]))
return
end
+
Map.parse(map)
+
+ if m:get(wdev:name(), "type") == "mac80211" and new_cc and new_cc ~= old_cc then
+ luci.sys.call("iw reg set %q" % new_cc)
+ luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless", arg[1]))
+ return
+ end
end
m.title = luci.util.pcdata(wnet:get_i18n())
end
end
end
- return (list[#list] and list[#list].driver_dbm) or pwr or 0
+ return pwr or ""
end
local iw = luci.sys.wifi.getiwinfo(arg[1])
if found_sta then
ch = s:taboption("general", DummyValue, "choice", translate("Channel"))
- ch.value = translatef("Locked to channel %d used by: %s",
- found_sta.channel, table.concat(found_sta.names, ", "))
+ ch.value = translatef("Locked to channel %s used by: %s",
+ found_sta.channel or "(auto)", table.concat(found_sta.names, ", "))
else
ch = s:taboption("general", Value, "_mode_freq", '<br />'..translate("Operating frequency"))
- ch.hwmodes = iw.hwmodelist
+ ch.hwmodes = hw_modes
+ ch.htmodes = iw.htmodelist
ch.freqlist = iw.freqlist
ch.template = "cbi/wireless_modefreq"
function ch.formvalue(self, section)
return {
- m:formvalue(self:cbid(section) .. ".band") or (iw.hwmodelist.g and "11g" or "11a"),
+ m:formvalue(self:cbid(section) .. ".band") or (hw_modes.g and "11g" or "11a"),
m:formvalue(self:cbid(section) .. ".channel") or "auto",
m:formvalue(self:cbid(section) .. ".htmode") or ""
}
------------------- MAC80211 Device ------------------
if hwtype == "mac80211" then
- if #tx_power_list > 1 then
+ if #tx_power_list > 0 then
tp = s:taboption("general", ListValue,
"txpower", translate("Transmit Power"), "dBm")
tp.rmempty = true
return txpower_current(Value.cfgvalue(...), tx_power_list)
end
+ tp:value("", translate("auto"))
for _, p in ipairs(tx_power_list) do
tp:value(p.driver_dbm, "%i dBm (%i mW)"
%{ p.display_dbm, p.display_mw })
end
-------------------- Madwifi Device ------------------
+------------------- Broadcom Device ------------------
-if hwtype == "atheros" then
+if hwtype == "broadcom" then
tp = s:taboption("general",
(#tx_power_list > 0) and ListValue or Value,
"txpower", translate("Transmit Power"), "dBm")
return txpower_current(Value.cfgvalue(...), tx_power_list)
end
+ tp:value("", translate("auto"))
for _, p in ipairs(tx_power_list) do
tp:value(p.driver_dbm, "%i dBm (%i mW)"
%{ p.display_dbm, p.display_mw })
end
- s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
-
- if not nsantenna then
- ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
- ant1.widget = "radio"
- ant1.orientation = "horizontal"
- ant1:depends("diversity", "")
- ant1:value("0", translate("auto"))
- ant1:value("1", translate("Antenna 1"))
- ant1:value("2", translate("Antenna 2"))
-
- ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
- ant2.widget = "radio"
- ant2.orientation = "horizontal"
- ant2:depends("diversity", "")
- ant2:value("0", translate("auto"))
- ant2:value("1", translate("Antenna 1"))
- ant2:value("2", translate("Antenna 2"))
-
- else -- NanoFoo
- local ant = s:taboption("advanced", ListValue, "antenna", translate("Transmitter Antenna"))
- ant:value("auto")
- ant:value("vertical")
- ant:value("horizontal")
- ant:value("external")
+ mode = s:taboption("advanced", ListValue, "hwmode", translate("Band"))
+ if hw_modes.b then
+ mode:value("11b", "2.4GHz (802.11b)")
+ if hw_modes.g then
+ mode:value("11bg", "2.4GHz (802.11b+g)")
+ end
end
-
- s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
- translate("Distance to farthest network member in meters."))
- s:taboption("advanced", Value, "regdomain", translate("Regulatory Domain"))
- s:taboption("advanced", Value, "country", translate("Country Code"))
- s:taboption("advanced", Flag, "outdoor", translate("Outdoor Channels"))
-
- --s:option(Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
-end
-
-
-
-------------------- Broadcom Device ------------------
-
-if hwtype == "broadcom" then
- tp = s:taboption("general",
- (#tx_power_list > 0) and ListValue or Value,
- "txpower", translate("Transmit Power"), "dBm")
-
- tp.rmempty = true
- tp.default = tx_power_cur
-
- function tp.cfgvalue(...)
- return txpower_current(Value.cfgvalue(...), tx_power_list)
+ if hw_modes.g then
+ mode:value("11g", "2.4GHz (802.11g)")
+ mode:value("11gst", "2.4GHz (802.11g + Turbo)")
+ mode:value("11lrs", "2.4GHz (802.11g Limited Rate Support)")
end
-
- for _, p in ipairs(tx_power_list) do
- tp:value(p.driver_dbm, "%i dBm (%i mW)"
- %{ p.display_dbm, p.display_mw })
+ if hw_modes.a then mode:value("11a", "5GHz (802.11a)") end
+ if hw_modes.n then
+ if hw_modes.g then
+ mode:value("11ng", "2.4GHz (802.11g+n)")
+ mode:value("11n", "2.4GHz (802.11n)")
+ end
+ if hw_modes.a then
+ mode:value("11na", "5GHz (802.11a+n)")
+ mode:value("11n", "5GHz (802.11n)")
+ end
+ htmode = s:taboption("advanced", ListValue, "htmode", translate("HT mode (802.11n)"))
+ htmode:depends("hwmode", "11ng")
+ htmode:depends("hwmode", "11na")
+ htmode:depends("hwmode", "11n")
+ htmode:value("HT20", "20MHz")
+ htmode:value("HT40", "40MHz")
end
ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
wmm:depends({mode="ap"})
wmm:depends({mode="ap-wds"})
wmm.default = wmm.enabled
-end
-
-
-
--------------------- Madwifi Interface ----------------------
-
-if hwtype == "atheros" then
- mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
- mode:value("monitor", translate("Monitor"))
- mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
- mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
- mode:value("wds", translate("Static WDS"))
-
- function mode.write(self, section, value)
- if value == "ap-wds" then
- ListValue.write(self, section, "ap")
- m.uci:set("wireless", section, "wds", 1)
- elseif value == "sta-wds" then
- ListValue.write(self, section, "sta")
- m.uci:set("wireless", section, "wds", 1)
- else
- ListValue.write(self, section, value)
- m.uci:delete("wireless", section, "wds")
- end
- end
-
- function mode.cfgvalue(self, section)
- local mode = ListValue.cfgvalue(self, section)
- local wds = m.uci:get("wireless", section, "wds") == "1"
-
- if mode == "ap" and wds then
- return "ap-wds"
- elseif mode == "sta" and wds then
- return "sta-wds"
- else
- return mode
- end
- end
-
- bssid:depends({mode="adhoc"})
- bssid:depends({mode="ahdemo"})
- bssid:depends({mode="wds"})
-
- wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
- wdssep:depends({mode="ap-wds"})
-
- s:taboption("advanced", Flag, "doth", "802.11h")
- hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="adhoc"})
- hidden:depends({mode="ap-wds"})
- hidden:depends({mode="sta-wds"})
- isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
- translate("Prevents client-to-client communication"))
- isolate:depends({mode="ap"})
- s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
-
- mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
- mp:value("", translate("disable"))
- mp:value("allow", translate("Allow listed only"))
- mp:value("deny", translate("Allow all except listed"))
-
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
- ml.datatype = "macaddr"
- ml:depends({macpolicy="allow"})
- ml:depends({macpolicy="deny"})
- nt.mac_hints(function(mac, name) ml:value(mac, "%s (%s)" %{ mac, name }) end)
-
- s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
- s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
- s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
- s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
- s:taboption("advanced", Flag, "compression", translate("Compression"))
-
- s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
- s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
- s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
-
- s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
- s:taboption("advanced", Flag, "xr", translate("XR Support"))
- s:taboption("advanced", Flag, "ar", translate("AR Support"))
-
- local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
- swm:depends({mode="adhoc"})
-
- local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
- nos:depends({mode="sta"})
- nos:depends({mode="sta-wds"})
-
- local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
- probereq.enabled = "0"
- probereq.disabled = "1"
+
+ ifname = s:taboption("advanced", Value, "ifname", translate("Interface name"), translate("Override default interface name"))
+ ifname.optional = true
end
encr:value("wep-open", translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"}, {mode="ahdemo"}, {mode="wds"})
encr:value("wep-shared", translate("WEP Shared Key"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"}, {mode="adhoc"}, {mode="ahdemo"}, {mode="wds"})
-if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
+if hwtype == "mac80211" or hwtype == "prism2" then
local supplicant = fs.access("/usr/sbin/wpa_supplicant")
local hostapd = fs.access("/usr/sbin/hostapd")
end
-if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
- nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
+if hwtype == "mac80211" or hwtype == "prism2" then
+
+ -- Probe 802.11r support (and EAP support as a proxy for Openwrt)
+ local has_80211r = (os.execute("hostapd -v11r 2>/dev/null || hostapd -veap 2>/dev/null") == 0)
+
+ ieee80211r = s:taboption("encryption", Flag, "ieee80211r",
+ translate("802.11r Fast Transition"),
+ translate("Enables fast roaming among access points that belong " ..
+ "to the same Mobility Domain"))
+ ieee80211r:depends({mode="ap", encryption="wpa"})
+ ieee80211r:depends({mode="ap", encryption="wpa2"})
+ ieee80211r:depends({mode="ap-wds", encryption="wpa"})
+ ieee80211r:depends({mode="ap-wds", encryption="wpa2"})
+ if has_80211r then
+ ieee80211r:depends({mode="ap", encryption="psk"})
+ ieee80211r:depends({mode="ap", encryption="psk2"})
+ ieee80211r:depends({mode="ap", encryption="psk-mixed"})
+ end
+ ieee80211r.rmempty = true
+
+ nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"),
+ translate("Used for two different purposes: RADIUS NAS ID and " ..
+ "802.11r R0KH-ID. Not needed with normal WPA(2)-PSK."))
nasid:depends({mode="ap", encryption="wpa"})
nasid:depends({mode="ap", encryption="wpa2"})
nasid:depends({mode="ap-wds", encryption="wpa"})
nasid:depends({mode="ap-wds", encryption="wpa2"})
+ nasid:depends({ieee80211r="1"})
nasid.rmempty = true
+ mobility_domain = s:taboption("encryption", Value, "mobility_domain",
+ translate("Mobility Domain"),
+ translate("4-character hexadecimal ID"))
+ mobility_domain:depends({ieee80211r="1"})
+ mobility_domain.placeholder = "4f57"
+ mobility_domain.datatype = "and(hexstring,rangelength(4,4))"
+ mobility_domain.rmempty = true
+
+ r0_key_lifetime = s:taboption("encryption", Value, "r0_key_lifetime",
+ translate("R0 Key Lifetime"), translate("minutes"))
+ r0_key_lifetime:depends({ieee80211r="1"})
+ r0_key_lifetime.placeholder = "10000"
+ r0_key_lifetime.datatype = "uinteger"
+ r0_key_lifetime.rmempty = true
+
+ r1_key_holder = s:taboption("encryption", Value, "r1_key_holder",
+ translate("R1 Key Holder"),
+ translate("6-octet identifier as a hex string - no colons"))
+ r1_key_holder:depends({ieee80211r="1"})
+ r1_key_holder.placeholder = "00004f577274"
+ r1_key_holder.datatype = "and(hexstring,rangelength(12,12))"
+ r1_key_holder.rmempty = true
+
+ reassociation_deadline = s:taboption("encryption", Value, "reassociation_deadline",
+ translate("Reassociation Deadline"),
+ translate("time units (TUs / 1.024 ms) [1000-65535]"))
+ reassociation_deadline:depends({ieee80211r="1"})
+ reassociation_deadline.placeholder = "1000"
+ reassociation_deadline.datatype = "range(1000,65535)"
+ reassociation_deadline.rmempty = true
+
+ pmk_r1_push = s:taboption("encryption", Flag, "pmk_r1_push", translate("PMK R1 Push"))
+ pmk_r1_push:depends({ieee80211r="1"})
+ pmk_r1_push.placeholder = "0"
+ pmk_r1_push.rmempty = true
+
+ r0kh = s:taboption("encryption", DynamicList, "r0kh", translate("External R0 Key Holder List"),
+ translate("List of R0KHs in the same Mobility Domain. " ..
+ "<br />Format: MAC-address,NAS-Identifier,128-bit key as hex string. " ..
+ "<br />This list is used to map R0KH-ID (NAS Identifier) to a destination " ..
+ "MAC address when requesting PMK-R1 key from the R0KH that the STA " ..
+ "used during the Initial Mobility Domain Association."))
+
+ r0kh:depends({ieee80211r="1"})
+ r0kh.rmempty = true
+
+ r1kh = s:taboption("encryption", DynamicList, "r1kh", translate("External R1 Key Holder List"),
+ translate ("List of R1KHs in the same Mobility Domain. "..
+ "<br />Format: MAC-address,R1KH-ID as 6 octets with colons,128-bit key as hex string. "..
+ "<br />This list is used to map R1KH-ID to a destination MAC address " ..
+ "when sending PMK-R1 key from the R0KH. This is also the " ..
+ "list of authorized R1KHs in the MD that can request PMK-R1 keys."))
+ r1kh:depends({ieee80211r="1"})
+ r1kh.rmempty = true
+ -- End of 802.11r options
+
eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
eaptype:value("tls", "TLS")
eaptype:value("ttls", "TTLS")
eaptype:value("peap", "PEAP")
+ eaptype:value("fast", "FAST")
eaptype:depends({mode="sta", encryption="wpa"})
eaptype:depends({mode="sta", encryption="wpa2"})
eaptype:depends({mode="sta-wds", encryption="wpa"})
cacert:depends({mode="sta", encryption="wpa2"})
cacert:depends({mode="sta-wds", encryption="wpa"})
cacert:depends({mode="sta-wds", encryption="wpa2"})
+ cacert.rmempty = true
clientcert = s:taboption("encryption", FileUpload, "client_cert", translate("Path to Client-Certificate"))
- clientcert:depends({mode="sta", encryption="wpa"})
- clientcert:depends({mode="sta", encryption="wpa2"})
- clientcert:depends({mode="sta-wds", encryption="wpa"})
- clientcert:depends({mode="sta-wds", encryption="wpa2"})
+ clientcert:depends({mode="sta", eap_type="tls", encryption="wpa"})
+ clientcert:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+ clientcert:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
+ clientcert:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
privkey:depends({mode="sta", eap_type="tls", encryption="wpa2"})
privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa"})
privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
-
-
- auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
- auth:value("PAP")
- auth:value("CHAP")
- auth:value("MSCHAP")
- auth:value("MSCHAPV2")
+ privkeypwd.rmempty = true
+ privkeypwd.password = true
+
+ auth = s:taboption("encryption", ListValue, "auth", translate("Authentication"))
+ auth:value("PAP", "PAP", {eap_type="ttls"})
+ auth:value("CHAP", "CHAP", {eap_type="ttls"})
+ auth:value("MSCHAP", "MSCHAP", {eap_type="ttls"})
+ auth:value("MSCHAPV2", "MSCHAPv2", {eap_type="ttls"})
+ auth:value("EAP-GTC")
+ auth:value("EAP-MD5")
+ auth:value("EAP-MSCHAPV2")
+ auth:value("EAP-TLS")
+ auth:depends({mode="sta", eap_type="fast", encryption="wpa2"})
+ auth:depends({mode="sta", eap_type="fast", encryption="wpa"})
auth:depends({mode="sta", eap_type="peap", encryption="wpa2"})
auth:depends({mode="sta", eap_type="peap", encryption="wpa"})
auth:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
auth:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+ auth:depends({mode="sta-wds", eap_type="fast", encryption="wpa2"})
+ auth:depends({mode="sta-wds", eap_type="fast", encryption="wpa"})
auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
+ cacert2 = s:taboption("encryption", FileUpload, "ca_cert2", translate("Path to inner CA-Certificate"))
+ cacert2:depends({mode="sta", auth="EAP-TLS", encryption="wpa"})
+ cacert2:depends({mode="sta", auth="EAP-TLS", encryption="wpa2"})
+ cacert2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa"})
+ cacert2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa2"})
+
+ clientcert2 = s:taboption("encryption", FileUpload, "client_cert2", translate("Path to inner Client-Certificate"))
+ clientcert2:depends({mode="sta", auth="EAP-TLS", encryption="wpa"})
+ clientcert2:depends({mode="sta", auth="EAP-TLS", encryption="wpa2"})
+ clientcert2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa"})
+ clientcert2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa2"})
+
+ privkey2 = s:taboption("encryption", FileUpload, "priv_key2", translate("Path to inner Private Key"))
+ privkey2:depends({mode="sta", auth="EAP-TLS", encryption="wpa"})
+ privkey2:depends({mode="sta", auth="EAP-TLS", encryption="wpa2"})
+ privkey2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa"})
+ privkey2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa2"})
+
+ privkeypwd2 = s:taboption("encryption", Value, "priv_key2_pwd", translate("Password of inner Private Key"))
+ privkeypwd2:depends({mode="sta", auth="EAP-TLS", encryption="wpa"})
+ privkeypwd2:depends({mode="sta", auth="EAP-TLS", encryption="wpa2"})
+ privkeypwd2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa"})
+ privkeypwd2:depends({mode="sta-wds", auth="EAP-TLS", encryption="wpa2"})
+ privkeypwd2.rmempty = true
+ privkeypwd2.password = true
identity = s:taboption("encryption", Value, "identity", translate("Identity"))
+ identity:depends({mode="sta", eap_type="fast", encryption="wpa2"})
+ identity:depends({mode="sta", eap_type="fast", encryption="wpa"})
identity:depends({mode="sta", eap_type="peap", encryption="wpa2"})
identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+ identity:depends({mode="sta-wds", eap_type="fast", encryption="wpa2"})
+ identity:depends({mode="sta-wds", eap_type="fast", encryption="wpa"})
identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
+ identity:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+ identity:depends({mode="sta", eap_type="tls", encryption="wpa"})
+ identity:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
+ identity:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
+
+ anonymous_identity = s:taboption("encryption", Value, "anonymous_identity", translate("Anonymous Identity"))
+ anonymous_identity:depends({mode="sta", eap_type="fast", encryption="wpa2"})
+ anonymous_identity:depends({mode="sta", eap_type="fast", encryption="wpa"})
+ anonymous_identity:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ anonymous_identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ anonymous_identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ anonymous_identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+ anonymous_identity:depends({mode="sta-wds", eap_type="fast", encryption="wpa2"})
+ anonymous_identity:depends({mode="sta-wds", eap_type="fast", encryption="wpa"})
+ anonymous_identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
+ anonymous_identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
+ anonymous_identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
+ anonymous_identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
+ anonymous_identity:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+ anonymous_identity:depends({mode="sta", eap_type="tls", encryption="wpa"})
+ anonymous_identity:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
+ anonymous_identity:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
password = s:taboption("encryption", Value, "password", translate("Password"))
+ password:depends({mode="sta", eap_type="fast", encryption="wpa2"})
+ password:depends({mode="sta", eap_type="fast", encryption="wpa"})
password:depends({mode="sta", eap_type="peap", encryption="wpa2"})
password:depends({mode="sta", eap_type="peap", encryption="wpa"})
password:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
password:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+ password:depends({mode="sta-wds", eap_type="fast", encryption="wpa2"})
+ password:depends({mode="sta-wds", eap_type="fast", encryption="wpa"})
password:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
password:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
+ password.rmempty = true
+ password.password = true
+end
+
+-- ieee802.11w options
+if hwtype == "mac80211" then
+ local has_80211w = (os.execute("hostapd -v11w 2>/dev/null || hostapd -veap 2>/dev/null") == 0)
+ if has_80211w then
+ ieee80211w = s:taboption("encryption", ListValue, "ieee80211w",
+ translate("802.11w Management Frame Protection"),
+ translate("Requires the 'full' version of wpad/hostapd " ..
+ "and support from the wifi driver <br />(as of Feb 2017: " ..
+ "ath9k and ath10k, in LEDE also mwlwifi and mt76)"))
+ ieee80211w.default = ""
+ ieee80211w.rmempty = true
+ ieee80211w:value("", translate("Disabled (default)"))
+ ieee80211w:value("1", translate("Optional"))
+ ieee80211w:value("2", translate("Required"))
+ ieee80211w:depends({mode="ap", encryption="wpa2"})
+ ieee80211w:depends({mode="ap-wds", encryption="wpa2"})
+ ieee80211w:depends({mode="ap", encryption="psk2"})
+ ieee80211w:depends({mode="ap", encryption="psk-mixed"})
+ ieee80211w:depends({mode="ap-wds", encryption="psk2"})
+ ieee80211w:depends({mode="ap-wds", encryption="psk-mixed"})
+
+ max_timeout = s:taboption("encryption", Value, "ieee80211w_max_timeout",
+ translate("802.11w maximum timeout"),
+ translate("802.11w Association SA Query maximum timeout"))
+ max_timeout:depends({ieee80211w="1"})
+ max_timeout:depends({ieee80211w="2"})
+ max_timeout.datatype = "uinteger"
+ max_timeout.placeholder = "1000"
+ max_timeout.rmempty = true
+
+ retry_timeout = s:taboption("encryption", Value, "ieee80211w_retry_timeout",
+ translate("802.11w retry timeout"),
+ translate("802.11w Association SA Query retry timeout"))
+ retry_timeout:depends({ieee80211w="1"})
+ retry_timeout:depends({ieee80211w="2"})
+ retry_timeout.datatype = "uinteger"
+ retry_timeout.placeholder = "201"
+ retry_timeout.rmempty = true
+ end
end
-if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
+if hwtype == "mac80211" or hwtype == "prism2" then
local wpasupplicant = fs.access("/usr/sbin/wpa_supplicant")
local hostcli = fs.access("/usr/sbin/hostapd_cli")
if hostcli and wpasupplicant then