target/linux/ramips/dts/3G-6200NL.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "3G-6200N", "ralink,rt3050-soc";
   7         model = "Edimax 3g-6200n";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  12                         ralink,uartmux = "gpio";
  13                         ralink,wdtmux = <1>;
  14                 };
  15
  16                 gpio0: gpio@600 {
  17                         status = "okay";
  18                 };
  19
  20         };
  21
  22         cfi@1f000000 {
  23                 compatible = "cfi-flash";
  24                 reg = <0x1f000000 0x800000>;
  25
  26                 bank-width = <2>;
  27                 device-width = <2>;
  28                 #address-cells = <1>;
  29                 #size-cells = <1>;
  30
  31                 partition@0 {
  32                         label = "u-boot";
  33                         reg = <0x0 0x30000>;
  34                         read-only;
  35                 };
  36
  37                 partition@30000 {
  38                         label = "u-boot-env";
  39                         reg = <0x30000 0x10000>;
  40                         read-only;
  41                 };
  42
  43                 factory: partition@40000 {
  44                         label = "factory";
  45                         reg = <0x40000 0x10000>;
  46                         read-only;
  47                 };
  48
  49                 partition@3e0000 {
  50                         label = "cimage";
  51                         reg = <0x3e0000 0x20000>;
  52                         read-only;
  53                 };
  54
  55                 partition@50000 {
  56                         label = "firmware";
  57                         reg = <0x50000 0x390000>;
  58                 };
  59         };
  60
  61         ethernet@10100000 {
  62                 status = "okay";
  63         };
  64
  65         esw@10110000 {
  66                 status = "okay";
  67                 ralink,portmap = <0x2f>;
  68         };
  69
  70         gpio-leds {
  71                 compatible = "gpio-leds";
  72                 wlan {
  73                         label = "edimax:amber:wlan";
  74                         gpios = <&gpio0 14 1>;
  75                 };
  76         };
  77
  78         gpio-keys-polled {
  79                 compatible = "gpio-keys-polled";
  80                 #address-cells = <1>;
  81                 #size-cells = <0>;
  82                 poll-interval = <20>;
  83                 wps {
  84                         label = "wps";
  85                         gpios = <&gpio0 12 1>;
  86                         linux,code = <0x211>;
  87                 };
  88         };
  89
  90         wmac@10180000 {
  91                 status = "okay";
  92         };
  93
  94         otg@101c0000 {
  95                 status = "okay";
  96         };
  97 };