commands-dms.h

   1 /*
   2  * uqmi -- tiny QMI support implementation
   3  *
   4  * Copyright (C) 2014-2015 Felix Fietkau <nbd@openwrt.org>
   5  *
   6  * This library is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU Lesser General Public
   8  * License as published by the Free Software Foundation; either
   9  * version 2 of the License, or (at your option) any later version.
  10  *
  11  * This library is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  14  * Lesser General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU Lesser General Public
  17  * License along with this library; if not, write to the
  18  * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
  19  * Boston, MA 02110-1301 USA.
  20  */
  21
  22 #define __uqmi_dms_commands                                                                                             \
  23         __uqmi_command(dms_get_capabilities, get-capabilities, no, QMI_SERVICE_DMS), \
  24         __uqmi_command(dms_get_pin_status, get-pin-status, no, QMI_SERVICE_DMS), \
  25         __uqmi_command(dms_verify_pin1, verify-pin1, required, QMI_SERVICE_DMS), \
  26         __uqmi_command(dms_verify_pin2, verify-pin2, required, QMI_SERVICE_DMS), \
  27         __uqmi_command(dms_set_pin1_protection, set-pin1-protection, required, QMI_SERVICE_DMS), \
  28         __uqmi_command(dms_set_pin2_protection, set-pin2-protection, required, QMI_SERVICE_DMS), \
  29         __uqmi_command(dms_set_pin, pin, required, CMD_TYPE_OPTION), \
  30         __uqmi_command(dms_change_pin1, change-pin1, no, QMI_SERVICE_DMS), \
  31         __uqmi_command(dms_change_pin2, change-pin2, no, QMI_SERVICE_DMS), \
  32         __uqmi_command(dms_unblock_pin1, unblock-pin1, no, QMI_SERVICE_DMS), \
  33         __uqmi_command(dms_unblock_pin2, unblock-pin2, no, QMI_SERVICE_DMS), \
  34         __uqmi_command(dms_set_puk, puk, required, CMD_TYPE_OPTION), \
  35         __uqmi_command(dms_set_new_pin, new-pin, required, CMD_TYPE_OPTION), \
  36         __uqmi_command(dms_get_iccid, get-iccid, no, QMI_SERVICE_DMS), \
  37         __uqmi_command(dms_get_imsi, get-imsi, no, QMI_SERVICE_DMS), \
  38         __uqmi_command(dms_get_imei, get-imei, no, QMI_SERVICE_DMS), \
  39         __uqmi_command(dms_get_msisdn, get-msisdn, no, QMI_SERVICE_DMS), \
  40         __uqmi_command(dms_set_operating_mode, set-device-operating-mode, required, QMI_SERVICE_DMS), \
  41         __uqmi_command(dms_reset, reset-dms, no, QMI_SERVICE_DMS) \
  42
  43 #define dms_helptext \
  44                 "  --get-capabilities:               List device capabilities\n" \
  45                 "  --get-pin-status:                 Get PIN verification status\n" \
  46                 "  --verify-pin1 <pin>:              Verify PIN1\n" \
  47                 "  --verify-pin2 <pin>:              Verify PIN2\n" \
  48                 "  --set-pin1-protection <state>:    Set PIN1 protection state (disabled, enabled)\n" \
  49                 "    --pin <pin>:                    PIN1 needed to change state\n" \
  50                 "  --set-pin2-protection <state>:    Set PIN2 protection state (disabled, enabled)\n" \
  51                 "    --pin <pin2>:                   PIN2 needed to change state\n" \
  52                 "  --change-pin1:                    Change PIN1\n" \
  53                 "    --pin <old pin>:                Current PIN1\n" \
  54                 "    --new-pin <new pin>:            New pin\n" \
  55                 "  --change-pin2:                    Change PIN2\n" \
  56                 "    --pin <old pin>:                Current PIN2\n" \
  57                 "    --new-pin <new pin>:            New pin\n" \
  58                 "  --unblock-pin1:                   Unblock PIN1\n" \
  59                 "    --puk <puk>:                    PUK needed to unblock\n" \
  60                 "    --new-pin <new pin>:            New pin\n" \
  61                 "  --unblock-pin2:                   Unblock PIN2\n" \
  62                 "    --puk <puk>:                    PUK needed to unblock\n" \
  63                 "    --new-pin <new pin>:            New pin\n" \
  64                 "  --get-iccid:                      Get the ICCID\n" \
  65                 "  --get-imsi:                       Get International Mobile Subscriber ID\n" \
  66                 "  --get-imei:                       Get International Mobile Equipment ID\n" \
  67                 "  --get-msisdn:                     Get the MSISDN (telephone number)\n" \
  68                 "  --reset-dms:                      Reset the DMS service\n" \
  69                 "  --set-device-operating-mode <m>   Set the device operating mode\n" \
  70                 "                                    (modes: online, low_power, factory_test, offline\n" \
  71                 "                                     reset, shutting_down, persistent_low_power,\n" \
  72                 "                                     mode_only_low_power)\n" \
  73