2 # Yangfl <mmyangfl@gmail.com>, 2017.
6 "Content-Type: text/plain; charset=UTF-8\n"
7 "Last-Translator: Yangfl <mmyangfl@gmail.com>\n"
8 "Language-Team: <debian-l10n-chinese@lists.debian.org>\n"
9 "Content-Transfer-Encoding: 8bit\n"
10 "Plural-Forms: nplurals=1; plural=0;\n"
11 "PO-Revision-Date: 2017-10-28 16:58+0800\n"
12 "X-Generator: Gtranslator 2.91.7\n"
30 "Acceptable values: 1-100. This many Tracking IP addresses must respond for "
31 "the link to be deemed up"
33 "取值范围:1-100。这个设置项指定了当多少个 IP 地址能够连通时接口会被认为在线"
35 msgid "Acceptable values: 1-1000. Defaults to 1 if not set"
36 msgstr "取值范围:1-100。如果不填写,默认值为 1"
41 msgid "Check IP rules"
44 msgid "Check routing table"
47 msgid "Collecting data..."
53 msgid "Currently Configured Interfaces"
56 msgid "Currently Configured Members"
59 msgid "Currently Configured Policies"
62 msgid "Destination address"
65 msgid "Destination port"
68 msgid "Detailed Status"
71 msgid "Diagnostic Results"
81 "Downed interface will be deemed up after this many successful ping tests"
82 msgstr "当 Ping 成功次数达到这个数值后,已经被认为离线的接口将会重新上线"
87 msgid "Enter value in hex, starting with <code>0x</code>"
88 msgstr "输入十六进制值,以 <code>0x</code> 开头"
90 msgid "Error collecting troubleshooting information"
96 msgid "Expect interface state on up event"
97 msgstr "在 up 事件发生时的预期接口状态"
99 msgid "Failure interval"
102 msgid "Firewall mask"
105 msgid "Flush conntrack table"
108 msgid "Flush global firewall conntrack table on interface events"
109 msgstr "在接口事件触发时刷新全局防火墙连接跟踪表"
114 msgid "Globals mwan3 options"
117 msgid "Hotplug Script"
120 msgid "Hotplug ifdown"
121 msgstr "Hotplug ifdown"
124 msgstr "Hotplug ifup"
135 msgid "Initial state"
141 msgid "Interface Status"
144 msgid "Interface down"
150 msgid "Interface will be deemed down after this many failed ping tests"
151 msgstr "当 Ping 失败次数达到这个数值后,接口会被认为离线"
156 msgid "Internet Protocol"
159 msgid "Keep failure interval"
162 msgid "Keep ping failure interval during failure state"
163 msgstr "在故障状态期间保持的 Ping 故障检测间隔"
165 msgid "Last 50 MWAN systemlog entries. Newest entries sorted at the top :"
166 msgstr "最近 50 条 MWAN 系统日志,最新条目排在顶部:"
171 msgid "Load Balancing"
177 msgid "Local source interface"
183 msgid "MWAN Detailed Status"
186 msgid "MWAN Interface Configuration"
189 msgid "MWAN Interface Configuration - %s"
190 msgstr "MWAN 接口配置 - %s"
192 msgid "MWAN Interface Diagnostics"
195 msgid "MWAN Interface Live Status"
198 msgid "MWAN Interface Systemlog"
201 msgid "MWAN Member Configuration"
204 msgid "MWAN Member Configuration - %s"
205 msgstr "MWAN 成员配置 - %s"
207 msgid "MWAN Policy Configuration"
210 msgid "MWAN Policy Configuration - %s"
211 msgstr "MWAN 策略配置 - %s"
213 msgid "MWAN Rule Configuration"
216 msgid "MWAN Rule Configuration - %s"
217 msgstr "MWAN 规则配置 - %s"
219 msgid "MWAN Service Control"
223 "MWAN supports up to 250 physical and/or logical interfaces<br />MWAN "
224 "requires that all interfaces have a unique metric configured in /etc/config/"
225 "network<br />Names must match the interface name found in /etc/config/"
226 "network (see advanced tab)<br />Names may contain characters A-Z, a-z, 0-9, "
227 "_ and no spaces<br />Interfaces may not share the same name as configured "
228 "members, policies or rules"
230 "MWAN 支持最多 250 个物理或逻辑接口。<br />MWAN 要求所有接口必须在 /etc/"
231 "config/network 中设定唯一的网关跃点。<br />名称必须与 /etc/config/network 中"
232 "的接口名称匹配。(可查看“高级”选项卡)<br />名称允许包括 A-Z、a-z、0-9、_ 但"
233 "是不能有空格。<br />接口不应该与成员、策略、规则中的任意一个设置项使用相同的"
237 "May be entered as a single or multiple port(s) (eg \"22\" or \"80,443\") or "
238 "as a portrange (eg \"1024:2048\") without quotes"
240 "可以输入一个或多个端口(例如“22”或者“80,443”)或者是一个端口范围(例"
253 "Members are profiles attaching a metric and weight to an MWAN interface<br /"
254 ">Names may contain characters A-Z, a-z, 0-9, _ and no spaces<br />Members "
255 "may not share the same name as configured interfaces, policies or rules"
257 "“成员”用来设置每一个 MWAN 接口的跃点数(即接口优先级)和所占比重。<br />名称"
258 "允许包括 A-Z、 a-、0-9、_ 但是不能有空格。<br />成员不应该与接口、策略、规则"
261 msgid "Members assigned"
268 "Name of IPset rule. Requires IPset rule in /etc/dnsmasq.conf (eg \"ipset=/"
269 "youtube.com/youtube\")"
271 "匹配 IPset 规则列表名称。需要先配置 /etc/dnsmasq.conf 中的 IPset 规则(例"
272 "如:“ipset=/youtube.com/youtube”)"
274 msgid "Network Config"
280 msgid "No MWAN interfaces found"
281 msgstr "没有找到 MWAN 接口"
283 msgid "No MWAN systemlog history found"
284 msgstr "没有在系统日志中找到 MWAN 历史信息"
286 msgid "No detailed status information available"
289 msgid "No diagnostic results returned"
292 msgid "No protocol specified"
301 msgid "Online (tracking active)"
304 msgid "Online (tracking off)"
313 msgid "Ping default gateway"
316 msgid "Ping interval"
319 msgid "Ping interval during failure detection"
320 msgstr "故障检测期间的 Ping 间隔"
322 msgid "Ping interval during failure recovering"
323 msgstr "故障恢复期间的 Ping 间隔"
331 msgid "Ping tracking IP"
338 "Policies are profiles grouping one or more members controlling how MWAN "
339 "distributes traffic<br />Member interfaces with lower metrics are used "
340 "first. Interfaces with the same metric load-balance<br />Load-balanced "
341 "member interfaces distribute more traffic out those with higher weights<br /"
342 ">Names may contain characters A-Z, a-z, 0-9, _ and no spaces. Names must be "
343 "15 characters or less<br />Policies may not share the same name as "
344 "configured interfaces, members or rules"
346 "“策略”把成员进行分组,告诉 MWAN 如何分配“规则”中使用这一策略的流量<br />拥有"
347 "较低跃点数的成员将会被优先使用。拥有相同跃点数的成员把流量进行负载均衡。<br /"
348 ">进行负载均衡的成员之间拥有较高比重的成员将会被分配到更多流量。<br />名称允许"
349 "包括A-Z、a-z、0-9、_ 但是不能有空格。名称应该在 15 个字符以内<br />策略不应该"
350 "与接口、成员、规则中的任意一个设置项使用相同的名称"
355 msgid "Policy assigned"
361 msgid "Recovery interval"
374 "Rules specify which traffic will use a particular MWAN policy based on IP "
375 "address, port or protocol<br />Rules are matched from top to bottom. Rules "
376 "below a matching rule are ignored. Traffic not matching any rule is routed "
377 "using the main routing table<br />Traffic destined for known (other than "
378 "default) networks is handled by the main routing table. Traffic matching a "
379 "rule, but all WAN interfaces for that policy are down will be blackholed<br /"
380 ">Names may contain characters A-Z, a-z, 0-9, _ and no spaces<br />Rules may "
381 "not share the same name as configured interfaces, members or policies"
383 "“规则”基于 IP 地址、协议、端口把流量划分到指定的“策略”中。<br />规则按照从上"
384 "到下的顺序进行匹配。除了第一条能够匹配一次通信的规则以外,其它规则将被忽略。"
385 "不匹配任何规则的通信将会由系统默认路由表进行。<br />来自已知的网络的转发流量"
386 "由系统默认路由表接手,然后 MWAN 从中匹配出相应的流量并转移到 MWAN 自己的路由"
387 "表。但是所有被划分到一个无法使用的策略的流量将会无法正常进行路由。<br />名称"
388 "允许包括A-Z、a-z、0-9、_ 但是不能有空格。<br />规则不应该与接口、成员、策略中"
391 msgid "Seconds. Acceptable values: 1-1000000. Defaults to 600 if not set"
392 msgstr "单位为秒。接受的值:1-1000000。留空则使用默认值 600 秒"
394 msgid "Source address"
406 msgid "Sticky timeout"
412 msgid "Supports CIDR notation (eg \"192.168.100.0/24\") without quotes"
413 msgstr "支持 CIDR 记法(例如:\"192.168.100.0/24\")不含引号"
415 msgid "There are currently %d of 250 supported interfaces configured"
416 msgstr "当前已配置 %d 个接口,最大支持 250 个"
419 "This displays the metric assigned to this interface in /etc/config/network"
420 msgstr "这里显示了这个接口在 /etc/config/network 中配置的跃点数"
423 "This hostname or IP address will be pinged to determine if the link is up or "
424 "down. Leave blank to assume interface is always online"
425 msgstr "通过 ping 此主机或 IP 地址来确定链路是否在线。留空则认为接口始终在线"
428 "This section allows you to modify the content of \"/etc/mwan3.user\".<br /"
429 ">The file is also preserved during sysupgrade.<br /><br />Notes:<br />This "
430 "file is interpreted as a shell script.<br />The first line of the script "
431 "must be "#!/bin/sh" without quotes.<br />Lines beginning with # are "
432 "comments and are not executed.<br />Put your custom mwan3 action here, they "
433 "will<br />be executed with each netifd hotplug interface event<br />on "
434 "interfaces for which mwan3 is enabled.<br /><br />There are three main "
435 "environment variables that are passed to this script.<br /><br />$ACTION "
436 "Either \"ifup\" or \"ifdown\"<br />$INTERFACE Name of the interface which "
437 "went up or down (e.g. \"wan\" or \"wwan\")<br />$DEVICE Physical device name "
438 "which interface went up or down (e.g. \"eth0\" or \"wwan0\")<br /><br />"
440 "这里允许您修改“/etc/mwan3.user”的内容。<br />该文件在 sysupgrade 期间也会保"
441 "留。<br /><br />注意:<br />该文件会作为 shell 脚本解释。<br />脚本的第一行必"
442 "须是"#!/bin/sh",不带引号。<br />以#开头的行是注释,不会执行。<br />"
443 "将您的自定义 mwan3 动作放在这里,他们将<br />在启用 mwan3 的接口上<br />在 "
444 "netifd hotplug 接口事件时执行。<br /><br />有三个主要的环境变量传递给这个脚"
445 "本。<br /><br />$ACTION “ifup”或“ifdown”<br />$INTERFACE 启动或停止的接口名"
446 "(例如“wan”或“wwan”)<br />$DEVICE 启动或停止接口的物理设备名(例"
447 "如“eth0”或“wwan0”)<br /><br />"
449 msgid "This section allows you to modify the contents of /etc/config/mwan3"
450 msgstr "这里允许您修改 /etc/config/mwan3 的内容"
452 msgid "This section allows you to modify the contents of /etc/config/network"
453 msgstr "这里允许您修改 /etc/config/network 的内容"
455 msgid "This section allows you to modify the contents of /etc/config/wireless"
456 msgstr "这里允许您修改 /etc/config/wireless 的内容"
461 msgid "Tracking hostname or IP address"
462 msgstr "跟踪的主机或 IP 地址"
464 msgid "Tracking method"
467 msgid "Tracking reliability"
470 msgid "Traffic Rules"
474 "Traffic from the same source IP address that previously matched this rule "
475 "within the sticky timeout period will use the same WAN interface"
477 "来自相同源 IP 的流量,如果已经匹配过此规则并且在粘滞超时时间内,将会使用相同"
480 msgid "Troubleshooting"
483 msgid "Troubleshooting Data"
487 "Use the IP address of this interface as source IP address for traffic "
488 "initiated by the router itself"
489 msgstr "使用该接口的 IP 地址作为路由器本身发起的流量的源 IP 地址"
491 msgid "View the contents of /etc/protocols for protocol descriptions"
492 msgstr "请查看 /etc/protocols 获取可选协议详情"
494 msgid "WARNING: %d interfaces are configured exceeding the maximum of 250!"
495 msgstr "警告:已配置 %d 个接口,超过最大值 250!"
498 "WARNING: Some interfaces are configured incorrectly or not at all in /etc/"
500 msgstr "警告:某些接口配置不正确或未配置到 /etc/config/network!"
503 "WARNING: Some interfaces have a higher reliability requirement than there "
504 "are tracking IP addresses!"
505 msgstr "警告:某些接口的跟踪可靠性要求大于了跟踪 IP 地址总数!"
508 "WARNING: Some interfaces have duplicate metrics configured in /etc/config/"
510 msgstr "警告:某些接口在 /etc/config/network 中配置了相同的跃点数!"
513 "WARNING: Some interfaces have no default route in the main routing table!"
514 msgstr "警告:某些接口在主路由表中没有默认路由!"
517 "WARNING: Some interfaces have no metric configured in /etc/config/network!"
518 msgstr "警告:某些接口没有在 /etc/config/network 中配置跃点数!"
521 "WARNING: Some policies have names exceeding the maximum of 15 characters!"
522 msgstr "警告:某些策略的名称超过了 15 个字符!"
525 "WARNING: Some rules have a port configured with no or improper protocol "
526 "specified! Please configure a specific protocol!"
528 "警告:某些规则指定了端口却没有配置或配置了不正确的协议,请重新指定协议!"
531 "WARNING: This and other interfaces have duplicate metrics configured in /etc/"
533 msgstr "警告:此接口和其他接口在 /etc/config/network 中配置了相同的跃点数!"
536 "WARNING: This interface has a higher reliability requirement than there are "
537 "tracking IP addresses!"
538 msgstr "警告:此接口的跟踪可靠性要求大于了跟踪 IP 地址总数!"
540 msgid "WARNING: This interface has no default route in the main routing table!"
541 msgstr "警告:此接口在主路由表中没有默认路由!"
544 "WARNING: This interface has no metric configured in /etc/config/network!"
545 msgstr "警告:此接口没有在 /etc/config/network 中配置跃点数!"
548 "WARNING: This interface is configured incorrectly or not at all in /etc/"
550 msgstr "警告:此接口配置不正确或未配置到 /etc/config/network!"
553 "WARNING: This policy's name is %d characters exceeding the maximum of 15!"
554 msgstr "警告:此策略的名称具有 %d 个字符,超过了 15 个字符!"
557 "WARNING: This rule is incorrectly configured with no or improper protocol "
558 "specified! Please configure a specific protocol!"
559 msgstr "警告:此规则没有配置或配置了不正确的协议,请重新指定协议!"
561 msgid "Waiting for MWAN to %s..."
562 msgstr "等待 MWAN %s..."
564 msgid "Waiting for diagnostic results..."
571 "When all policy members are offline use this behavior for matched traffic"
572 msgstr "当所有策略成员都无法使用的时候,对使用该策略的流量使用这个操作"
574 msgid "Wireless Config"
583 msgid "blackhole (drop)"
586 msgid "default (use main routing table)"
607 msgid "unreachable (reject)"
610 #~ msgid "Restore default hotplug script"
611 #~ msgstr "恢复默认的 hotplug 脚本"
613 #~ msgid "Restore..."
617 #~ "This section allows you to modify the contents of /etc/hotplug.d/iface/16-"
618 #~ "mwancustom<br />This is useful for running system commands and/or scripts "
619 #~ "based on interface ifup or ifdown hotplug events<br /><br />Notes:<br /"
620 #~ ">The first line of the script must be "#!/bin/sh" without "
621 #~ "quotes<br />Lines beginning with # are comments and are not executed<br /"
622 #~ "><br />Available variables:<br />$ACTION is the hotplug event (ifup, "
623 #~ "ifdown)<br />$INTERFACE is the interface name (wan1, wan2, etc.)<br />"
624 #~ "$DEVICE is the device name attached to the interface (eth0.1, eth1, etc.)"
626 #~ "这里允许您修改 /etc/hotplug.d/iface/16-mwancustom 的内容<br />这可以在接"
627 #~ "口 ifup 或 ifdown Hotplug 事件时运行系统命令或脚本<br /><br />注意:<br />"
628 #~ "脚本的第一行必须是 "#!/bin/sh" 不含引号<br />以#开头的行是注释,"
629 #~ "不会执行<br /><br />可用变量:<br />$ACTION 是 Hotplug 事件(ifup, ifdown)"
630 #~ "<br />$INTERFACE 是接口名称(wan1、wan2 等)<br />$DEVICE 是连接到接口的设"
631 #~ "备名称 (eth0.1、eth1 等)"