X-Git-Url: http://git.archive.openwrt.org/?p=project%2Fuqmi.git;a=blobdiff_plain;f=commands-wds.h;h=de025d78669e5ccc9e214dffa2d7bf2b2d47ab78;hp=8ddfb1e82d0a7000d4cfc27c1a8c9492a0c35937;hb=HEAD;hpb=4dc4ca968008f4bdf614e8e9941e9935114d54be

diff --git a/commands-wds.h b/commands-wds.h
index 8ddfb1e..de025d7 100644
--- a/commands-wds.h
+++ b/commands-wds.h
@@ -20,27 +20,35 @@
  */
 
 #define __uqmi_wds_commands \
-	__uqmi_command(wds_start_network, start-network, required, QMI_SERVICE_WDS), \
+	__uqmi_command(wds_start_network, start-network, no, QMI_SERVICE_WDS), \
+	__uqmi_command(wds_set_apn, apn, required, CMD_TYPE_OPTION), \
 	__uqmi_command(wds_set_auth, auth-type, required, CMD_TYPE_OPTION), \
 	__uqmi_command(wds_set_username, username, required, CMD_TYPE_OPTION), \
 	__uqmi_command(wds_set_password, password, required, CMD_TYPE_OPTION), \
-	__uqmi_command(wds_set_ip_family, ip-family, required, CMD_TYPE_OPTION), \
+	__uqmi_command(wds_set_ip_family_pref, ip-family, required, CMD_TYPE_OPTION), \
 	__uqmi_command(wds_set_autoconnect, autoconnect, no, CMD_TYPE_OPTION), \
+	__uqmi_command(wds_set_profile, profile, required, CMD_TYPE_OPTION), \
 	__uqmi_command(wds_stop_network, stop-network, required, QMI_SERVICE_WDS), \
 	__uqmi_command(wds_get_packet_service_status, get-data-status, no, QMI_SERVICE_WDS), \
+	__uqmi_command(wds_set_ip_family, set-ip-family, required, QMI_SERVICE_WDS), \
 	__uqmi_command(wds_set_autoconnect_setting, set-autoconnect, required, QMI_SERVICE_WDS), \
-	__uqmi_command(wds_reset, reset-wds, no, QMI_SERVICE_WDS) \
+	__uqmi_command(wds_reset, reset-wds, no, QMI_SERVICE_WDS), \
+	__uqmi_command(wds_get_current_settings, get-current-settings, no, QMI_SERVICE_WDS) \
 
 
 #define wds_helptext \
-		"  --start-network <apn>:            Start network connection (use with options below)\n" \
+		"  --start-network:                  Start network connection (use with options below)\n" \
+		"    --apn <apn>:                    Use APN\n" \
 		"    --auth-type pap|chap|both|none: Use network authentication type\n" \
 		"    --username <name>:              Use network username\n" \
 		"    --password <password>:          Use network password\n" \
 		"    --ip-family <family>:           Use ip-family for the connection (ipv4, ipv6, unspecified)\n" \
 		"    --autoconnect:                  Enable automatic connect/reconnect\n" \
+		"    --profile <index>:              Use connection profile\n" \
 		"  --stop-network <pdh>:             Stop network connection (use with option below)\n" \
 		"    --autoconnect:                  Disable automatic connect/reconnect\n" \
 		"  --get-data-status:                Get current data access status\n" \
-		"  --set-autoconnect <val>:          Get current data access status (disabled, enabled, paused)\n" \
+		"  --set-ip-family <val>:            Set ip-family (ipv4, ipv6, unspecified)\n" \
+		"  --set-autoconnect <val>:          Set automatic connect/reconnect (disabled, enabled, paused)\n" \
+		"  --get-current-settings:           Get current connection settings\n" \