X-Git-Url: http://git.archive.openwrt.org/?p=project%2Fuqmi.git;a=blobdiff_plain;f=commands-wds.h;h=3076bae2d94b55bcc245c1e045ca7716be8c6b12;hp=045e8811321d711abb32b2fffcff7856acd3116d;hb=423a7e9c9448a247e121a9e79f9ac1a1e8bb5e56;hpb=bd09c4e6198c4d6ca2fde9d63899d4befd16e7ca

diff --git a/commands-wds.h b/commands-wds.h
index 045e881..3076bae 100644
--- a/commands-wds.h
+++ b/commands-wds.h
@@ -1,15 +1,52 @@
+/*
+ * uqmi -- tiny QMI support implementation
+ *
+ * Copyright (C) 2014-2015 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301 USA.
+ */
+
 #define __uqmi_wds_commands \
-	__uqmi_command(wds_start_network, start-network, required, QMI_SERVICE_WDS), \
+	__uqmi_command(wds_start_network, start-network, no, QMI_SERVICE_WDS), \
+	__uqmi_command(wds_set_apn, apn, required, CMD_TYPE_OPTION), \
 	__uqmi_command(wds_set_auth, auth-type, required, CMD_TYPE_OPTION), \
 	__uqmi_command(wds_set_username, username, required, CMD_TYPE_OPTION), \
 	__uqmi_command(wds_set_password, password, required, CMD_TYPE_OPTION), \
-	__uqmi_command(wds_get_packet_service_status, get-data-status, no, QMI_SERVICE_WDS) \
+	__uqmi_command(wds_set_ip_family_pref, ip-family, required, CMD_TYPE_OPTION), \
+	__uqmi_command(wds_set_autoconnect, autoconnect, no, CMD_TYPE_OPTION), \
+	__uqmi_command(wds_stop_network, stop-network, required, QMI_SERVICE_WDS), \
+	__uqmi_command(wds_get_packet_service_status, get-data-status, no, QMI_SERVICE_WDS), \
+	__uqmi_command(wds_set_ip_family, set-ip-family, required, QMI_SERVICE_WDS), \
+	__uqmi_command(wds_set_autoconnect_setting, set-autoconnect, required, QMI_SERVICE_WDS), \
+	__uqmi_command(wds_reset, reset-wds, no, QMI_SERVICE_WDS), \
+	__uqmi_command(wds_get_current_settings, get-current-settings, no, QMI_SERVICE_WDS) \
 
 
 #define wds_helptext \
-		"  --start-network <apn>:            Start network connection (use with options below)\n" \
+		"  --start-network:                  Start network connection (use with options below)\n" \
+		"    --apn <apn>:                    Use APN\n" \
 		"    --auth-type pap|chap|both|none: Use network authentication type\n" \
 		"    --username <name>:              Use network username\n" \
 		"    --password <password>:          Use network password\n" \
+		"    --ip-family <family>:           Use ip-family for the connection (ipv4, ipv6, unspecified)\n" \
+		"    --autoconnect:                  Enable automatic connect/reconnect\n" \
+		"  --stop-network <pdh>:             Stop network connection (use with option below)\n" \
+		"    --autoconnect:                  Disable automatic connect/reconnect\n" \
 		"  --get-data-status:                Get current data access status\n" \
+		"  --set-ip-family <val>:            Set ip-family (ipv4, ipv6, unspecified)\n" \
+		"  --set-autoconnect <val>:          Set automatic connect/reconnect (disabled, enabled, paused)\n" \
+		"  --get-current-settings:           Get current connection settings\n" \