X-Git-Url: http://git.archive.openwrt.org/?p=project%2Fuqmi.git;a=blobdiff_plain;f=commands-nas.h;h=9ebfa0034625c6d850a9feb95ca8695dcaa50b65;hp=0cc11a138dad27c737e4d5425a1a691dd8190d6e;hb=8ceeab690d8c6f1e3afbd4bcaee7bc2ba3fbe165;hpb=40fa0f983ba95da1750c8bef6cdfa0271f4c4b44

diff --git a/commands-nas.h b/commands-nas.h
index 0cc11a1..9ebfa00 100644
--- a/commands-nas.h
+++ b/commands-nas.h
@@ -1,9 +1,49 @@
+/*
+ * uqmi -- tiny QMI support implementation
+ *
+ * Copyright (C) 2014-2015 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301 USA.
+ */
+
 #define __uqmi_nas_commands \
-	__uqmi_command(nas_set_network_modes, set-network-modes, required, QMI_SERVICE_NAS), \
-	__uqmi_command(nas_get_signal_info, get-signal-info, no, QMI_SERVICE_NAS) \
+	__uqmi_command(nas_do_set_system_selection, __set-system-selection, no, QMI_SERVICE_NAS), \
+	__uqmi_command(nas_set_network_modes, set-network-modes, required, CMD_TYPE_OPTION), \
+	__uqmi_command(nas_initiate_network_register, network-register, no, QMI_SERVICE_NAS), \
+	__uqmi_command(nas_set_plmn, set-plmn, no, QMI_SERVICE_NAS), \
+	__uqmi_command(nas_set_mcc, mcc, required, CMD_TYPE_OPTION), \
+	__uqmi_command(nas_set_mnc, mnc, required, CMD_TYPE_OPTION), \
+	__uqmi_command(nas_network_scan, network-scan, no, QMI_SERVICE_NAS), \
+	__uqmi_command(nas_get_signal_info, get-signal-info, no, QMI_SERVICE_NAS), \
+	__uqmi_command(nas_get_serving_system, get-serving-system, no, QMI_SERVICE_NAS), \
+	__uqmi_command(nas_set_network_preference, set-network-preference, required, CMD_TYPE_OPTION), \
+	__uqmi_command(nas_set_roaming, set-network-roaming, required, CMD_TYPE_OPTION) \
 
 #define nas_helptext \
-		"  --set-network-modes <modes>:      Set preferred network mode (Syntax: <mode1>[,<mode2>,...])\n" \
+		"  --set-network-modes <modes>:      Set usable network modes (Syntax: <mode1>[,<mode2>,...])\n" \
 		"                                    Available modes: all, lte, umts, gsm, cdma, td-scdma\n" \
-		"  --get-signal-info:                Get signal strength info\n"
+		"  --set-network-preference <mode>:  Set preferred network mode to <mode>\n" \
+		"                                    Available modes: auto, gsm, wcdma\n" \
+		"  --set-network-roaming <mode>:     Set roaming preference:\n" \
+		"                                    Available modes: any, off, only\n" \
+		"  --network-scan:                   Initiate network scan\n" \
+		"  --network-register:               Initiate network register\n" \
+		"  --set-plmn:                       Register at specified network\n" \
+		"    --mcc <mcc>:                    Mobile Country Code (0 - auto)\n" \
+		"    --mnc <mnc>:                    Mobile Network Code\n" \
+		"  --get-signal-info:                Get signal strength info\n" \
+		"  --get-serving-system:             Get serving system info\n" \