wds: add a separate --set-ip-family option

[project/uqmi.git] / commands-wds.h

diff --git a/commands-wds.h b/commands-wds.h
index c1985b3..c603f79 100644 (file)
--- a/commands-wds.h
+++ b/commands-wds.h
@@ -1,13 +1,37 @@
+/*
+ * uqmi -- tiny QMI support implementation
+ *
+ * Copyright (C) 2014-2015 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301 USA.
+ */
+
 #define __uqmi_wds_commands \
        __uqmi_command(wds_start_network, start-network, required, QMI_SERVICE_WDS), \
        __uqmi_command(wds_set_auth, auth-type, required, CMD_TYPE_OPTION), \
        __uqmi_command(wds_set_username, username, required, CMD_TYPE_OPTION), \
        __uqmi_command(wds_set_password, password, required, CMD_TYPE_OPTION), \
+       __uqmi_command(wds_set_ip_family_pref, ip-family, required, CMD_TYPE_OPTION), \
        __uqmi_command(wds_set_autoconnect, autoconnect, no, CMD_TYPE_OPTION), \
        __uqmi_command(wds_stop_network, stop-network, required, QMI_SERVICE_WDS), \
        __uqmi_command(wds_get_packet_service_status, get-data-status, no, QMI_SERVICE_WDS), \
+       __uqmi_command(wds_set_ip_family, set-ip-family, required, QMI_SERVICE_WDS), \
        __uqmi_command(wds_set_autoconnect_setting, set-autoconnect, required, QMI_SERVICE_WDS), \
-       __uqmi_command(wds_reset, reset-wds, no, QMI_SERVICE_WDS) \
+       __uqmi_command(wds_reset, reset-wds, no, QMI_SERVICE_WDS), \
+       __uqmi_command(wds_get_current_settings, get-current-settings, no, QMI_SERVICE_WDS) \
 
 
 #define wds_helptext \
@@ -15,9 +39,12 @@
                "    --auth-type pap|chap|both|none: Use network authentication type\n" \
                "    --username <name>:              Use network username\n" \
                "    --password <password>:          Use network password\n" \
+               "    --ip-family <family>:           Use ip-family for the connection (ipv4, ipv6, unspecified)\n" \
                "    --autoconnect:                  Enable automatic connect/reconnect\n" \
                "  --stop-network <pdh>:             Stop network connection (use with option below)\n" \
                "    --autoconnect:                  Disable automatic connect/reconnect\n" \
                "  --get-data-status:                Get current data access status\n" \
-               "  --set-autoconnect <val>:          Get current data access status (disabled, enabled, paused)\n" \
+               "  --set-ip-family <val>:            Set ip-family (ipv4, ipv6, unspecified)\n" \
+               "  --set-autoconnect <val>:          Set automatic connect/reconnect (disabled, enabled, paused)\n" \
+               "  --get-current-settings:           Get current connection settings\n" \